[Q] Icon too small when try to port MIUI - Optimus One, P500, V Q&A, Help & Troubleshooting

Hi, everyone,
I tried to learn how to port miui for lg p500 by following rishabh.raj37's guide in another thread. Everything works fine except the theme and icon. I cannot post in the developer section, so I put my question here. Hope someone can help me.
I started with porting a working MIUI with cm7 nightly as the base. I tried to port everything to a newer cm7 nightly.
However, the theme does not work (cannot change) and the icons are small compared to the origin rom. Since the original works, i dont think it has anything to do with resizing the icons.
Does anyone know how to fix it? I must have missed out certain files to change.

shen6121 said:
Hi, everyone,
I tried to learn how to port miui for lg p500 by following rishabh.raj37's guide in another thread. Everything works fine except the theme and icon. I cannot post in the developer section, so I put my question here. Hope someone can help me.
I started with porting a working MIUI with cm7 nightly as the base. I tried to port everything to a newer cm7 nightly.
However, the theme does not work (cannot change) and the icons are small compared to the origin rom. Since the original works, i dont think it has anything to do with resizing the icons.
Does anyone know how to fix it? I must have missed out certain files to change.
Click to expand...
Click to collapse
another problem noticed is that the port rom has delay in turning on the screen while the base one does not. however, when i port it, the new rom also has the delay problem. any idea what is the cause? thanks

hrm... you should send a PM to neko95, Rashed97, popdog123, DJNoXD, Bytecode or adfad666, they seem to be the main ROM developers for the P500, maybe they could help you.
This thread might be helpful:
[GUIDE] Porting rom from HDPI to MDPI

shen6121 said:
another problem noticed is that the port rom has delay in turning on the screen while the base one does not. however, when i port it, the new rom also has the delay problem. any idea what is the cause? thanks
Click to expand...
Click to collapse
Sometimes it's the CPU freq and you need to set Min to 480 MHz.
What you mean is wakelock. Wakelock is often a problem, sometimes also in a tweaked ROM.
So set CPU freq to 480 MHz min.
Or just create a script and place it in init.d, if you want to share it here and don't want that everybody should set it manually.
Sent from my LG-P500 running Protos 0.0.1

CodingDroid said:
Sometimes it's the CPU freq and you need to set Min to 480 MHz.
What you mean is wakelock. Wakelock is often a problem, sometimes also in a tweaked ROM.
So set CPU freq to 480 MHz min.
Or just create a script and place it in init.d, if you want to share it here and don't want that everybody should set it manually.
Sent from my LG-P500 running Protos 0.0.1
Click to expand...
Click to collapse
thanks. the delay problem has been solved by flashing another kernel. hope this will help other people who has similar delay problems.

Related

[Rom]Unsenset(LeeDroid/Psychosis based), Froyo partial sense, OCUV

Fast, stable (should be) ROM with the best from sense but without the cluttering.
I was looking for some time for ROM which will have the best features from HTC but without the unneeded stuff.
After some searching i found great ROM Psychosis but, it not updated for quite some time. So, based on Psychosis ROM (which based on LeeDroid 2.2a) i want to present you my first work, which might be buggy(nah, just kidding), might have (or not have) some apps but, it works already, just not polished visually, working on it now
This rom was built in simplicity and speed in mind so,
Featuring:
Kernel 2.6.32.24 by Ziggy471 OC 1190Mhz/UV/UVC/HAVS/BFS
Unlock by trackball + menu
ADWLauncher 1.2.0
HTC Radio
HTC Dialer
HTC Contacts
HTC Sync with FB/Twitter/Gmail
HTC FriendStream
Music Mod
IME Mod
AdFree
SU
RootExplorer
Gmail 2.3
Youtube 2.0.26
Criticism, ideas, what to add are welcome.
The version is 0.1. There is some stuff to do which i just can't yet find out how to do it. But this is related exclusively to interface beauty
Known bugs:
afaik none
If you find a bug please report it in red color.
Installation:
Download ROM update.zip. Full wipe your phone, Flash, reboot.
After first successfull boot flash MOD.zip.
Downloads:
not available due to DDoS and updating to new version, stay tuned
More to come
Screenshots:
Uploading, stay tuned ^_^
reserved for future
will download when the link is up
Rom is UP!
Soon will add some addons, stay tuned ^_^
he wanted something more or less like that. Thank you I am going to try
What about FM Radio and Sense's version of copy&paste? Are they present?
Both radio and copy/paste present
How bout the calendar, clock widget and pepole widget?
Calendar is there but widgets were removed
Clock widget switched to WFClock widget which looks the same
Hi,
Thanks for your effort. A few concerns though - some people had problems with 1190MHz during boot. Does the kernel include the fix to prevent this? Also, what's the default governor? Is it running from 245-998 MHz by default?
w.0.o.t said:
Hi,
Thanks for your effort. A few concerns though - some people had problems with 1190MHz during boot. Does the kernel include the fix to prevent this? Also, what's the default governor? Is it running from 245-998 MHz by default?
Click to expand...
Click to collapse
It runing 245 - 1190 by default with interactive governor + scaling by screenstate.
If ppl will report about problems with that speed i'll revert it to defaults. But yet i found out that this specific kernel works flawless on such speed
Give it a try
Osleg said:
It runing 245 - 1190 by default with interactive governor + scaling by screenstate.
If ppl will report about problems with that speed i'll revert it to defaults. But yet i found out that this specific kernel works flawless on such speed
Give it a try
Click to expand...
Click to collapse
downloading now. will flash it once i'm done with work. cheers.
as expected i'm stuck at the cyanogenmod bootanim
i did full wipe. i guess you need to include snq-'s bootfix so that the frequency doesn't jump to 1190MHz during boot. also you may wanna lower the default max frequency to 1152MHz or lower. just a suggestion.
Interesting, i checked on 4 Desire phones and had no problems.
Is it bootlooping? If it is can u post logcat?
If it doesn't than i think you should wait a little longer, it takes about 10minutes for the first boot.
Also i will change few things in upcoming version to make the first boot a little faster
Osleg said:
Interesting, i checked on 4 Desire phones and had no problems.
Is it bootlooping? If it is can u post logcat?
If it doesn't than i think you should wait a little longer, it takes about 10minutes for the first boot.
Also i will change few things in upcoming version to make the first boot a little faster
Click to expand...
Click to collapse
it's not bootlooping. it just stuck there on the bootanim. i think i've waited for 8-9hours cause i fell asleep while waiting for it to boot up lol. and when i woke up it was still at the cyanogenmod bootanim.
why don't you mod LeeDroid 2.2e instead of using Psychosis? just curious.
Can u provide logcat?
Also im switching to LeeDroid for next versions
Osleg said:
Can u provide logcat?
Also im switching to LeeDroid for next versions
Click to expand...
Click to collapse
i will flash it once more and provide you the logcat after i get my work done.
Great, thank you
w.0.o.t said:
i will flash it once more and provide you the logcat after i get my work done.
Click to expand...
Click to collapse
Sent from my HTC Desire using XDA App
here's the logcat. now it's bootlooping a few times on the cyanogen bootanimation, then it will reboot from splash screen. it keeps repeating in that pattern.
That is not kernel/cpu issue, the trouble is in my server which became DDoSed after i posted url for the rom here -.- Tried to DL it from my server and flash and got same error.
Anyway new version will come in few days and will host it on dropbox ^_^

[ROM][4 May 2013] CM7 for HTC Merge/Lexikon [Kernel: msm7x30 CM]

I originally released this rom on 2fastforums.com (http://2fastroms.com/showthread.php?5435-WIP-18-Dec-2012-CM7-Kernel-CM-msm7x30) and now feel it is ready for release on XDA. (Site is currently down for unknown reasons)
CM7 for HTC Merge/Lexikon
Click to expand...
Click to collapse
Code:
Features:
-100% stock CM7 from source
What works:
Almost everything
Click to expand...
Click to collapse
What doesn't work:
MMS on USC?
Jittery Compass
Click to expand...
Click to collapse
Instructions
1) Flash recovery through bootloader or fastboot
2) Boot into recovery and factory reset, also go into mounts and format system
3) Flash Rom
4) Flash GApps
Click to expand...
Click to collapse
Downloads
Recovery: http://d-h.st/users/e334/?fld_id=6766 (Either one will work, I personally prefer v5.0.2.8 Capacitive Touch)
ROM: http://d-h.st/users/e334/?fld_id=6727
GApps: https://www.box.com/s/79bpq0ywdxcf4093t926 (thanks liamf1!)
Click to expand...
Click to collapse
Source
Kernel: https://github.com/jianC/htc-kernel-msm7x30
Lexikon Device Tree: https://github.com/jianC/android_device_htc_lexikon
Lexikon Proprietary Vendor Tree: https://github.com/jianC/android_vendor_htc
Click to expand...
Click to collapse
All my changes are documented on github.
Credits: Cyberblade (CDMA fix), liamf1 (beta tester/helpful feedback) 2fast4u88, Cyanogenmod & Team, Kali-, Neopeek & Team, UnitedDev & Team, and everyone else who contributed.
Please leave any feedback about bugs/problems/glitches/etc and I will try to fix them.
Thank you ;D
Sent from my HTC Merge using Tapatalk 2
faille13 said:
Thank you ;D
Sent from my HTC Merge using Tapatalk 2
Click to expand...
Click to collapse
Nice to see you on here too
Lol yeah, I'm everywhere.
Sent from my HTC Merge using Tapatalk 2
---------- Post added at 01:34 PM ---------- Previous post was at 01:12 PM ----------
I don't get around here too often. I haven't seen a dedicated forum for my merge yet.
Sent from my HTC Merge using Tapatalk 2
GPS problem
How to fix the GPS ?
It won't turn on , I mean GPS icon is not shown in the notifications bar and it searches for the satellites forever .
I use 20130121 version of this mod and gsm mode .
Gytixas said:
How to fix the GPS ?
It won't turn on , I mean GPS icon is not shown in the notifications bar and it searches for the satellites forever .
I use 20130121 version of this mod and gsm mode .
Click to expand...
Click to collapse
Hmm.. i'll look into it.
I am so happy that new version established but i GSM doesn't work. Please fix the bug
Thanks
Mistake
sorry sorry, GSM works perfect, Just needed to reboot. Thanks a lot. but Bluetooth and GPS doesn't work either. Plz fix these bugs ! Thanks
nikoloz995 said:
I am so happy that new version established but i GSM doesn't work. Please fix the bug
Thanks
Click to expand...
Click to collapse
+1
development of the firmware is?
Thank you so much, this is the best rom for this phone (the only working cyanogen). I am happy to report that after a few weeks use it has across the board improved my phones responsiveness, battery life, and usability. However... I have one problem. I live in Alaska and have GCI as a carrier... when I alter my cdma apn info, everything works up to the point I want to change my MCC and MNC... it's defaulting to 310 and 012 respectively. When I leave those values alone it saves the apn... when I alter them, the apn entry disappears! How can I fix this? I I need it to be 311 and 370 but can't get it to save my apn.
If this never works, I don't care, I wil continue using this rom without mobile internet or mms downloads... it's just that good.
lexikonlover said:
Thank you so much, this is the best rom for this phone (the only working cyanogen). I am happy to report that after a few weeks use it has across the board improved my phones responsiveness, battery life, and usability. However... I have one problem. I live in Alaska and have GCI as a carrier... when I alter my cdma apn info, everything works up to the point I want to change my MCC and MNC... it's defaulting to 310 and 012 respectively. When I leave those values alone it saves the apn... when I alter them, the apn entry disappears! How can I fix this? I I need it to be 311 and 370 but can't get it to save my apn.
If this never works, I don't care, I wil continue using this rom without mobile internet or mms downloads... it's just that good.
Click to expand...
Click to collapse
APN backup and restore app worked for me on US Cellular (backup apn from stock install, then restore to CM7), though I had to switch to GoSMS as a messaging app for MMS to send properly (stock app would receive but not send MMS - SMS worked normally in both). I had no success manually entering the apn info - didn't seem to have any effect when I tried.
@JianC
I found an issue with the 20130121 version from Jan 21 you posted on 2fastroms: If the phone is left on the charger it will charge all the way up, then discharge all the way back to zero while still plugged in. It still displays that it is at 100%, but then abruptly drops to whatever the actual charge level is after a few minutes of use. I've tried wiping battery stats to no effect and it works properly in stock rom. This is the only bug I can't seem to work around... Any fix or suggestions for things to try would be most appreciated! Thanks again for your work on this ROM!
Fixed GPS (and other issues), please see OP!
EDIT: I'll look into the apns issue... I don't use my Merge on CDMA so it's a stab in the dark.
The final version of CM7 has been uploaded (charging bug *should* be fixed).. I will not be supporting CM7 anymore but will be working on Evervolv/CM10.1.
Thanks for your feedback and support!
jianC said:
The final version of CM7 has been uploaded (charging bug *should* be fixed).. I will not be supporting CM7 anymore but will be working on Evervolv/CM10.1.
Thanks for your feedback and support!
Click to expand...
Click to collapse
CM10.1 availible to test?
DJ_MiX said:
CM10.1 availible to test?
Click to expand...
Click to collapse
Nope, he working on kernel .
http://review.evervolv.com
Sent from my HTC Merge using xda premium
If any help with the kernel is needed I will try my best to free up some time and pitch in some help. I have made several kernels for several other devices and the most popular being for the Acer Iconia tablets here on XDA see my signature. Great to see a CM rom for the merge on here though!! GB works fine for me, not that much cool factor from cm 10 or cm 10.1 as I have compiled quiet a few nightlies for the A100.. Other than the Project Butter and the overall UI I could care less about JB/ICS.
linuxsociety said:
If any help with the kernel is needed I will try my best to free up some time and pitch in some help. I have made several kernels for several other devices and the most popular being for the Acer Iconia tablets here on XDA see my signature. Great to see a CM rom for the merge on here though!! GB works fine for me, not that much cool factor from cm 10 or cm 10.1 as I have compiled quiet a few nightlies for the A100.. Other than the Project Butter and the overall UI I could care less about JB/ICS.
Click to expand...
Click to collapse
@linuxsociety That would be awesome if you could. Elginsk8r and I have already ported the board files but I can't figure out what's keeping it from booting..
@ everyone: CM9 for the htc merge is here!: http://forum.xda-developers.com/showthread.php?p=44487058#post44487058
jianC said:
@linuxsociety That would be awesome if you could. Elginsk8r and I have already ported the board files but I can't figure out what's keeping it from booting..
Click to expand...
Click to collapse
Does it just boot loop or does it go black? does the CM logo appear? Guess there is no logcat output via adb either or you'd probably have nailed it by now. Maybe we will have to get jtag debugging output so we can see exactly what is causing the kernel panic and work from there.
I have just now had time to get on xda and check up on the new status. I will try to clone the git repository and check the kernel .config for the cm10 build. Just a thought but on most devices that have a working kernel with cm9 the exact same kernel + modules work fine with CM10. Have you all tried the kernel from CM9 that was just recently posted on any CM10 builds for the device? Not much has changed between ICS and JB that are dependent on in kernel features or that require bleeding edge mainline kernel and/or proprietary kernel patches. However there is a good possibility that the issue is more to do with the bootloader that is required to chainload the android OS for JB causing CM10 not to boot properly. So updating the bootloader may be necessary for JB/CM10 to boot properly. Nevertheless we need some debugging output in order to pinpoint what exactly is the problem going on. I am going to flash cm9 to my merge now and see how everything goes. I may experiment with the cm9 kernel and a cm10 build if I can find one for the merge. My hardware I have right now would take quiet some time to build JB as I haven't even used this old c2d laptop to build any android roms yet lol. Sorry for such a long posting but hopefully it is of some help in finding the resolution to the problems we have.
Thanks guys!
linuxsociety said:
Does it just boot loop or does it go black? does the CM logo appear? Guess there is no logcat output via adb either or you'd probably have nailed it by now. Maybe we will have to get jtag debugging output so we can see exactly what is causing the kernel panic and work from there.
I have just now had time to get on xda and check up on the new status. I will try to clone the git repository and check the kernel .config for the cm10 build. Just a thought but on most devices that have a working kernel with cm9 the exact same kernel + modules work fine with CM10. Have you all tried the kernel from CM9 that was just recently posted on any CM10 builds for the device? Not much has changed between ICS and JB that are dependent on in kernel features or that require bleeding edge mainline kernel and/or proprietary kernel patches. However there is a good possibility that the issue is more to do with the bootloader that is required to chainload the android OS for JB causing CM10 not to boot properly. So updating the bootloader may be necessary for JB/CM10 to boot properly. Nevertheless we need some debugging output in order to pinpoint what exactly is the problem going on. I am going to flash cm9 to my merge now and see how everything goes. I may experiment with the cm9 kernel and a cm10 build if I can find one for the merge. My hardware I have right now would take quiet some time to build JB as I haven't even used this old c2d laptop to build any android roms yet lol. Sorry for such a long posting but hopefully it is of some help in finding the resolution to the problems we have.
Thanks guys!
Click to expand...
Click to collapse
The .35 kernel works fine for CM10.0 but I'm having some issues booting cm10.1 with the .35 kernel because of some graphics memory allocation issues. The main issue is that there are a few issues that can't be fully fixed without the 3.0 kernel such as the camera/camcorder, ION support, etc (which is WIP here: http://review.evervolv.com/#/c/6609/ ). I have already tried probing for the UART TX/RX pins on the lexikon motherboard with a bus pirate but I have not found anything to date. I ordered a micro usb breakout board yesterday for USB UART debugging and am going to pick up some resistors from radioshack so we can hopefully get some progress on the 3.0 kernel because it won't boot far enough to adb or dmesg for our purposes. The problem isn't CM10 right now, but the kernel, which would require jtag or uart debugging, as you have mentioned. I hope that we can get the 3.0 kernel booting soon so we can have cm9/10 fully working.
jianC said:
The .35 kernel works fine for CM10.0 but I'm having some issues booting cm10.1 with the .35 kernel because of some graphics memory allocation issues. The main issue is that there are a few issues that can't be fully fixed without the 3.0 kernel such as the camera/camcorder, ION support, etc (which is WIP here: http://review.evervolv.com/#/c/6609/ ). I have already tried probing for the UART TX/RX pins on the lexikon motherboard with a bus pirate but I have not found anything to date. I ordered a micro usb breakout board yesterday for USB UART debugging and am going to pick up some resistors from radioshack so we can hopefully get some progress on the 3.0 kernel because it won't boot far enough to adb or dmesg for our purposes. The problem isn't CM10 right now, but the kernel, which would require jtag or uart debugging, as you have mentioned. I hope that we can get the 3.0 kernel booting soon so we can have cm9/10 fully working.
Click to expand...
Click to collapse
This sounds about like the exact same issues that was experienced when I was helping hashcode work on the original kindle fire device and getting it to work with ICS. I 'think' with the HTC it shouldn't be near as hard to resolve the issue to get full hw acceleration, memory mappings camera/gps and all the extra bells and whistles if we make an attempt at backporting the necessary support into the .35 kernel instead of trying to upgrade * to 3.x which will be adding to the work and break more things than it fixes. Since HTC apparently isn't going to be releasing any updates for the device it looks like it is going to be left all up to us to make one of two decisions:
1) backporting kernel - only the few things remaining needed for our current working GB kernel to have full support for ICS/JB roms
OR
2) updating to 3.x.x and merging HTC fixes and 3rd party patches -through several mainline kernel patches and keeping the proprietary htc addins compatible.
My opinion/suggestion:
I'd think of the two options that backporting would be the most logical answer to the equation since we are only missing support for few things and you already have everything working except the camera, ION, BINDER(?), and other >=3.0.0 android patches. Plus the device is pretty well coming to a good place to say cease development work and either enjoy the device or upgrade to something newer. So if we could get JB support or even just ICS working fully I think 99.99% of all owners/users would be more than 99.99% happy!! I know I would be very happy myself!

[ROM] Velocity Cruz T301 Feyer's Resurrection 2.2.1

Feyer's Resurrection ROM​
List of Requirements***
Must be rooted
Must have working version of Clockwork Mod installed
-Note-
If you recently flashed the Steven J Hill 0.3 Rom all this will be included on your device no need to do anything else.
Flashing instructions
Boot into CWM
Factory Reset
Wipe Cache
Wipe Dalvik Cache (Under advanced if you don't know)
select my .zip from your SD card and let it run its course
Let it bake for 30-45 mins before using to help rom settle
Rom Features
based on SJH V0.3 with SJH Kernel (not Overclockable)
Overall Stability improvement
Removed browser to avoid issues with java pick one up from the playstore (Suggested is Opera)
debloated (Also removed many SJH apps that were preinstalled to clear room on internal SD)
De-Odexed
rooted (Superuser included)
Minimal Gapps preinstalled (If you want other Google Services get them from the playstore)
changed model build in build.prop to match T301
changed DM heapsize to 32 MB (Should help with some apps running out of memory)
updated DalvikTurbo libdvm to the newest available for Froyo
Doesn't change recovery partition so your CWM stays intact
Some other things can't remember them all
Theme Related
Changed default launcher to Launcherpro and removed stock launcher for storage reasons (if you don't like it don't use my ROM)
changed default wallpaper
Adjusted lock screen for easier unlocking (Heard a lot of complaints about other ROMs lock screens)
changed font to Ubuntu default
adjusted DPI to match Nexus 7 (213 DPI instead of 240)
changed default boot animation (Runs Choppy I will make adjustments in Alpha 2)
added overall blue tint to windows and pop ups
adjusted icons for status bar
changed swipe down menu with new look
Changed appearance of loading indicator
Things not working on Rom
Status Bar still on top trying to move keys to bottom to match ICS
Overclocking (Somthing in the Kernel that needs to be worked out)
Some HW Acceleration (I don't even know if Froyo or MIPS had HWA but I know that it doesn't work properly on this device)
Ram comsumption issues (See Below for Tips and Tricks)
a whole ton of apps (We have ingenic Mips jz4760 and most apps are made for ARM not MIPS)
CURRENTLY ROOT ISN'T WORKING WILL FIX IN NEXT RELEASE
***Tips and Tricks on using your T301***
Use a task killer(I know they are taboo but they do help on this tablet)
Limit number of Widgets
Limit apps with notifications (Disable noifications on apps if you can)
Limit number of apps you have installed (Don't go download happy and fill up your internal storage)
Limit multitasking (The more apps running the slower it will get)
2/19/2013
Code:
Services
- changed Dalvik heap to 40MB to help out with applications
- Services.jar [url="http://forum.xda-developers.com/showthread.php?t=991276/"]Superchargered[/url]
- Rom is De-Odexed (Realized I posted wrong on alpha 1)
- batterymod now working (hopefully better battery life)
Theme
- Fixed Notifications to remove blue hue
- added blue glow effect
- battery themed
- wide scale Ubuntu font to match Ubuntu 12.10
- Better themed notification pane
2/6/2013
Code:
Initial release
Alternative Download Link​
The Thread is open I hope that anyone with a Cruz T301 is still interested in this ROM. Most people have moved on but I figured I would provide files downloads and help. Anyone that wants to play around with my update and put different things into can. Feel free to use it as a base for other Roms.
Awesome.. Don't quit now! Over clock kernel would be the best thing it's ever seen!
Been using this rom for a few days now and I love it... it's fast, sleek and haven't had any problems with it... excluding the root issue..
Any updates on when the root issue is going to be fixed? I've tried my hand at rooting it myself but keep running into the dreaded "SU: unknown user root" issue.
Antifreeze2173 said:
Been using this rom for a few days now and I love it... it's fast, sleek and haven't had any problems with it... excluding the root issue..
Any updates on when the root issue is going to be fixed? I've tried my hand at rooting it myself but keep running into the dreaded "SU: unknown user root" issue.
Click to expand...
Click to collapse
It is in the works, but I keep running into bootloop issues with A3 that I am trying to smooth out before releasing it. Currently an ETA isn't available... But I promise It is in the works!
Soo any updates?
Problem with Opera
Hello,
First thank you for this great work.
I installed Resurrection 2.2.1 version without problem.
By cons when I try to install Opera message says "your device is not compatible."
Same with Firefox. Any idea?
Thank you for your answers.
Excuse my bad English is not my native language!
Works great! Thanks Feyer
Hi I am a noob android enthusiast that got a t301 from a friend to mess around with. After reading a lot of your earlier forum work on this project I decided to try the Alpha Resurrection and it works great Thank you soooooo much for making this tablet useful again! Your tweaks and deletions of garbage was just what this baby needed. Don't know where we would all be without yourself and Steven J Hill, but thanks to you both. I signed up for xda just to tell ya that. Your directions were clear and worked great! I think some folks that were having probs may not have cleared out all caches like you suggest, as I have encountered similar probs on other roms. All in all a great ROM and it has been fun reading the forums and watching ya grow into your own dev self Keep up the great work and I'll keep watching for updates.
Great development :thumbup:
Sent from my GT-S6802 using xda app-developers app
Ever get OC worked out? Just dug this thing out and booted it up for the first time in forever.
Sent from my RCT6378W2 using Tapatalk
TotesMyGoats said:
Ever get OC worked out? Just dug this thing out and booted it up for the first time in forever.
Sent from my RCT6378W2 using Tapatalk
Click to expand...
Click to collapse
No I have no clue how to develop a kernel... had a few guys peeter out on me with development and so I have slowed down on making a new version. For some reason Root doesn't hold and I have tried all the tricks I know. It is weird developing for MiPS
I had never heard of MiPS before this tablet. But I'm starting to mess with developing, so I'll give a kernel a go when I get to that point
Sent from my RCT6378W2 using Tapatalk
TotesMyGoats said:
I had never heard of MiPS before this tablet. But I'm starting to mess with developing, so I'll give a kernel a go when I get to that point
Sent from my RCT6378W2 using Tapatalk
Click to expand...
Click to collapse
Yea it seems like MIPS is generally used in china only and so development is very limited. You can always swing by http://www.imgtec.com/mips/developers/ and get started there... kinda a pain to work with since I have not really found any other developers to help me out I'm not really an experienced dev haha
feyerbrand said:
Yea it seems like MIPS is generally used in china only and so development is very limited. You can always swing by http://www.imgtec.com/mips/developers/ and get started there... kinda a pain to work with since I have not really found any other developers to help me out I'm not really an experienced dev haha
Click to expand...
Click to collapse
I will see what I can do. I tried to compile my first kernel (for my phone) last night and got an error, gonna try to fix it today and get it compiled. Once I do, I'll look into this, and definitely take a look at that link.
Sent from my RCT6378W2 using Tapatalk
TotesMyGoats said:
I will see what I can do. I tried to compile my first kernel (for my phone) last night and got an error, gonna try to fix it today and get it compiled. Once I do, I'll look into this, and definitely take a look at that link.
Sent from my RCT6378W2 using Tapatalk
Click to expand...
Click to collapse
Well if you find success let me know and I will take a crack at adding it to the updated version of the ROM. I am still trying to find out why it doesn't allow super user access. It has been a real puzzler.
I tried to run cpu-z to get some info on the device. It installed, but crashes on launch >.<
Sent from my RCT6378W2 using Tapatalk
TotesMyGoats said:
I tried to run cpu-z to get some info on the device. It installed, but crashes on launch >.<
Sent from my RCT6378W2 using Tapatalk
Click to expand...
Click to collapse
We have the Ingenic JZ4760 MIPS SoC
http://hands.com/~lkcl/eoma/jz4760/JZ4760_Board_Design Guide_EN.pdf
What's the latest news on this? I'm fixing one for a friend, and would love to see maybe a beta version released.

[ROM] Lolfisch v1.0 for the Jiayu G3N

Welcome to my thread for the Jiayu G3N, the new release of the G3 with the s501 chip.
I have ported GThrill ROM v3.0 to the G3N.
GThrill is based on Cyanogenmod 10. It is Jelly bean 4.1.2. There is currently no theme support, but I'll look into that in future builds.
Details of the GThrill ROM can be found here; http://forum.xda-developers.com/showthread.php?t=2163707
This ROM should have all the features of the official ROM, (and more!) the only changes are behind-the-scenes.
Features
- based on "CM10"
- Jellybean 4.1.2
- system/framework zipaligned
- init.d support
- zipalign on the fly (script by Wes Garner)
- slim and light: removed unwanted apps
- host file (to block known ad servers/hosts)
- some build.prop tweaks from different sources
- contains some lines from V6 supercharger script (by zeppelinrox, particularly kernel tweaks)
- Jellybean Keyboard (SWIPE feature)
- Google Chrome browser (bundled stock browser FCs)
- Language: English, French, Chinese, German,
Confirmed working;
Bluetooth
Wifi
GPS
Yet to be tested;
FM Radio
Known bugs;
Front camera is dark and seems to take dark pictures. Setting the mode to night and then back again fixed this. Bizzarely, the front camera seems to be taking 3MP images although it only has a 2MP sensor. I am looking into this. It looks like the camera software has been ported from an Amoi N820, which has a 3MP front facing camera.
With regards to overclocking and undervolting, I have not heard of any kernels for any MT6577 devices that have offered this. And I'm sure better men than me have tried!
If there is another G3 ROM that you'd like to see ported, or improvements you'd like to see made on this ROM, leave comments below
If your language is not supported, install morelocale from the Play store. You can use it to select any language you wish!
Disclaimer: As with things XDA, you do all these things entirely at your own risk, I am not responsible EVEN IF Kim Jong Un flashes this, it breaks his G3N and in a fit of rage, he declares nuclear war on everyone.
Install instructions:
First, get root and install clockworkmod following the guide here; http://www.modaco.com/topic/359590-...very-ics-spell-check-fixed-jelly-bean-update/
Then place the zip file on your SD cart, boot into recovery and install!
Flashable zip, install via the recovery of your choice. Confirmed working on CWM. This is a full ROM, not a patch.
Remember to backup your files and previous ROM!
You shouldn't need to do a full wipe if going from a 4.1.2 ROM to this, but I recommend that you do. (I didn't )
If going from a 4.04 ROM to this, you MUST do a factory reset in CWM, otherwise it won't boot.
Please don't mirror my files!
Enjoy
EDIT 14/04/2013 Lolfisch v1.1 released!
Changelog;
-Numerous build.prop tweaks to improve browsing speeds, performance and to remove USB debugging icon (USB debugging can still be enabled in settings)
-Fixed LED wakelock issue. Deep sleep mode now works, improving battery life. (Thanks to evirus for his help)
-Fixed Clock app by replacing it with 4.2 clock. If you're still getting forced close's when trying to set an alarm, clear the app's data.
-Fixed Handcent SMS incompatibility
-Updated 4.2 keyboard using a Nexus 4 ROM. Runs smoother now.
-Updated Calendar app to the one from the play store. Now the app will update automatically as it is linked to the play store
Install instructions:
Flashable zip, install via the recovery of your choice. Confirmed working on CWM & TWRP recoveries. This is a full ROM, not a patch.
Remember to backup your files and previous ROM!
You shouldn't need to do a full wipe if going from a 4.1.2 ROM to this, but I recommend that you do. (I didn't )
If going from a 4.04 ROM to this, you MUST do a factory reset in CWM, otherwise it won't boot.
Please don't mirror my files!
Download link for 1.1:https://dl.dropboxusercontent.com/s...F97MsaZoHs4I0lKCiZZ-G16MvF4wLe-oNCS-R0eA&dl=1
NB:This ROM is for the Jiayu G3N. A G3 update may follow.
Reserved for future development
There is an MT6577 custom kernel but different phone..let me look that up for you..
Sent from my G3 using Tapatalk 2
first impressions: great rom! smooth and everything works, except for the clock which FCs when trying to set the alarm. Same as was reported with Gthrill..
Sent from my JY-G3N using Tapatalk 2
boofman said:
first impressions: great rom! smooth and everything works, except for the clock which FCs when trying to set the alarm. Same as was reported with Gthrill..
Sent from my JY-G3N using Tapatalk 2
Click to expand...
Click to collapse
Glad to hear good feedback on the whole. I plan to replace the clock with the 4.2.2 clock at some point (I have university exams in just over a week but will do it straight after that
clock is not a biggie..you can always download Alarm Clock+, 100% better than stock..camera seems better than stock..must be placebo, but still..
EDIT: flashed this through TWRP..kinda sad to think that this one's too good, I don't think a rom could get smoother..oh yeah, Theme Support please!
Sent from my JY-G3N using Tapatalk 2
Antutu v3.2.2 on this ROM: 5,500
Stock 4.0.4 G3N: 5,300
Lolfisch significantly smoother despite the 200 point difference..
Sent from my JY-G3N using Tapatalk 2
It's possible to include Spanish translation to this ROM?
Thanks
boofman said:
clock is not a biggie..you can always download Alarm Clock+, 100% better than stock..camera seems better than stock..must be placebo, but still..
EDIT: flashed this through TWRP..kinda sad to think that this one's too good, I don't think a rom could get smoother..oh yeah, Theme Support please!
Sent from my JY-G3N using Tapatalk 2
Click to expand...
Click to collapse
Haha, you've just made my day
I'll look into that in a few weeks, Uni exams have to come first I'm afraid!
boofman said:
Antutu v3.2.2 on this ROM: 5,500
Stock 4.0.4 G3N: 5,300
Lolfisch significantly smoother despite the 200 point difference..
Sent from my JY-G3N using Tapatalk 2
Click to expand...
Click to collapse
Interesting, I got a score of 5659 on Antutu. Probably SD card write speeds, I guess.
I'm going to try and improve performance further by making sure V6 supercharger is implemented properly and porting thunderzap kernel if a jelly bean version is released.
The mt6577 has been reported as being overclockable to speeds of 1.4ghz. That would be an amazing performance boost! But we need source code for that, so it is quite unlikely.
molinano said:
It's possible to include Spanish translation to this ROM?
Thanks
Click to expand...
Click to collapse
If your language is not supported, install morelocale from the Play store. You can use it to select any language you wish!
what's thunderzap?
as for the scores, I got a class 4 microsd..
and for the kernel sources, we do have one for ICS..not quite why mediatek/jiayu haven't released them yet..
thanks for the rom, and Goodluck on the exams!
EDIT: Thudeezap is a custom kernel which allows OC and other tweaks, but ICS only..I wonder: OC ICS vs stock kernel JB, performance-wise, which is better?
Sent from my JY-G3N using Tapatalk 2
Chrissyboy101 said:
Haha, you've just made my day
I'll look into that in a few weeks, Uni exams have to come first I'm afraid!
Interesting, I got a score of 5659 on Antutu. Probably SD card write speeds, I guess.
I'm going to try and improve performance further by making sure V6 supercharger is implemented properly and porting thunderzap kernel if a jelly bean version is released.
The mt6577 has been reported as being overclockable to speeds of 1.4ghz. That would be an amazing performance boost! But we need source code for that, so it is quite unlikely.
If your language is not supported, install morelocale from the Play store. You can use it to select any language you wish!
Click to expand...
Click to collapse
Thanks for the help.
Morelocale2 was great for translating, but now I face antoher little problem. When I isntalled Foursquare receive this message "This device isn't compatible with Play services". What does it mean? Did I something wrong? All oher apps (Twitter, Dropbox, Instagram) seem to work properly...
boofman said:
what's thunderzap?
as for the scores, I got a class 4 microsd..
and for the kernel sources, we do have one for ICS..not quite why mediatek/jiayu haven't released them yet..
thanks for the rom, and Goodluck on the exams!
EDIT: Thudeezap is a custom kernel which allows OC and other tweaks, but ICS only..I wonder: OC ICS vs stock kernel JB, performance-wise, which is better?
Sent from my JY-G3N using Tapatalk 2
Click to expand...
Click to collapse
Yeah, thunderzap is the thing you sent me, silly
I would definitely recommend Jelly Bean over ICS, even with overclock. The UI is nicer, you get Google Now, plus with project butter, you get better performance/battery drain. I'm loving this ROM's speed, plays HD videos with no lag . If you want it to run faster, you can chance the CPU governor to performance to ensure the phone is always running at max frequency. If you do, I'd recommend a tasker setup to change this when you turn the screen off. I'm currently running ondemand with screen on and powersave with screen off.
molinano said:
Thanks for the help.
Morelocale2 was great for translating, but now I face antoher little problem. When I isntalled Foursquare receive this message "This device isn't compatible with Play services". What does it mean? Did I something wrong? All oher apps (Twitter, Dropbox, Instagram) seem to work properly...
Click to expand...
Click to collapse
Not sure, will look into it!
GOOD NEWS
Wakelock bug was reported to me yesterday. I thought it was fixed in Gthrill but apparently not. However, thanks to evirus, I've been able to fix the issue for our ROM. See the first post for a .zip file that patches the issue on both G3&G3N versions of Gthrill
Chrissyboy101 said:
If you want it to run faster, you can chance the CPU governor to performance to ensure the phone is always running at max frequency. If you do, I'd recommend a tasker setup to change this when you turn the screen off. I'm currently running ondemand with screen on and powersave with screen off.
Not sure, will look into it!
Click to expand...
Click to collapse
Tasker is a great idea..but I noticed that I can't set CPU 1, so all I get is 1 core running at Performance governor
Sent from my JY-G3N using Tapatalk 2
boofman said:
Tasker is a great idea..but I noticed that I can't set CPU 1, so all I get is 1 core running at Performance governor
Sent from my JY-G3N using Tapatalk 2
Click to expand...
Click to collapse
I'm not sure how kernels work but I'm pretty sure that the governor is not core specific. That's why you cant set core 1. However, I'm not sure if taker is having any effect on the CPU at all ATM!
Chrissyboy101 said:
I'm not sure how kernels work but I'm pretty sure that the governor is not core specific. That's why you cant set core 1. However, I'm not sure if taker is having any effect on the CPU at all ATM!
Click to expand...
Click to collapse
tasker somehow works..I checked using CPU spy, frequency and governor are applied, but only one core works via SystemPanel app..so I still use tasker for "screen off" event, so I can have single core locked down at 250mhz when screen is off..
Sent from my JY-G3N using Tapatalk 2
---------- Post added at 11:43 PM ---------- Previous post was at 11:35 PM ----------
Chrissyboy101 said:
Wakelock bug was reported to me yesterday. I thought it was fixed in Gthrill but apparently not. However, thanks to evirus, I've been able to fix the issue for our ROM. See the first post for a .zip file that patches the issue on both G3&G3N versions of Gthrill
Click to expand...
Click to collapse
nice job! Thanks!
I'll try your rom next week. :good:
One strange thing (G3N, stock rom ics 4.0):
if I press/hold the VOL- button (+ the power button) I boot into "factory mode"
then, I can go up and down highlihting a few choices BUT can't select any, because only vol buttons seem to work
(no button seem to act as "enter" to activate the "selected" choice.
Any idea?
Thanks again!
How is battery life with your rom?
Are HD videos smoother in Jelly Bean?
Cant wait for the g3 version. Hope you finish your exams verry soon
Sent from my JY-G3 using XDA Premium HD app
ROM works just fine so far with exception of music apps. none of them sees my music files. anyone with same experience, possibly solution for this?
Sent from my JY-G3N using Tapatalk 2
nrpetonr said:
ROM works just fine so far with exception of music apps. none of them sees my music files. anyone with same experience, possibly solution for this?
Sent from my JY-G3N using Tapatalk 2
Click to expand...
Click to collapse
tried many ideas to solve it, but at the end i had to format sd card and start from beginning. it works now.
Sent from my JY-G3 using Tapatalk 2

[DEV]- Pantech Vega N6 A860 - CM10 Porting

This thread is going to be WIP thread for the porting of CM10 to the Pantech Vega N6 A860 codename e51.
Currently kernels are extracted and device tree wip while I collect the files to be input
https://github.com/VincentEmmanuel/android_kernel_pantech_e51k.git
I welcome anyone who is interested to help out in any way because I am really new in this porting stuff.
WIll update as and when more work is done.
Things working on now
1. Trying to find a suitable msm8960 common files repo (Not sure whether needed this at all but conducting R&D now)
2. Compiling a list of proprietary files needed for the build
God bless.
Vincent
ClockworkMod
ClockworkMod for A860 K/L/S
Flash using fastboot. Instructions are all over XDA so please search.
Thanks
thanks so much for your work...
another than CM10.1 , I also want to see customized kernel which can further enhance A860 , like power tweaks, disable logging, init.d or even add FauxAudio mod
Finally something about te Vega No6
I have the A860K. I installed a customized ROM from here http://mizal.net:82/pantech/NO.6/
Works fine, but it is not very customized. Still would like to get rid of Korean characters.Another kernel. deodexed. Less bloatware, etc.
Any other customizations?
Cheers!
---------- Post added at 11:58 AM ---------- Previous post was at 11:20 AM ----------
Leechoonhwee said:
This thread is going to be WIP thread for the porting of CM10 to the Pantech Vega N6 A860 codename e51.
Currently kernels are extracted and device tree wip while I collect the files to be input
https://github.com/VincentEmmanuel/android_kernel_pantech_e51k.git
I welcome anyone who is interested to help out in any way because I am really new in this porting stuff.
WIll update as and when more work is done.
Things working on now
1. Trying to find a suitable msm8960 common files repo (Not sure whether needed this at all but conducting R&D now)
2. Compiling a list of proprietary files needed for the build
God bless.
Vincent
Click to expand...
Click to collapse
I would not mind helping, but I am even newer than yourself
I am not a programmer, but I know very good shell scripting, PHP, and not so good C and some other useless languages.
I have pro skills in Linux as well (I work with it)
Let me know if I could be of any help.
Cheers and good luck!
magare said:
I have the A860K. I installed a customized ROM from here http://mizal.net:82/pantech/NO.6/
Works fine, but it is not very customized. Still would like to get rid of Korean characters.Another kernel. deodexed. Less bloatware, etc.
Any other customizations?
Cheers!
---------- Post added at 11:58 AM ---------- Previous post was at 11:20 AM ----------
I would not mind helping, but I am even newer than yourself
I am not a programmer, but I know very good shell scripting, PHP, and not so good C and some other useless languages.
I have pro skills in Linux as well (I work with it)
Let me know if I could be of any help.
Cheers and good luck!
Click to expand...
Click to collapse
Anyone can help in anyway they can! Please take a look at the following page about CM porting.
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
Currently, I am trying to find a similiar device in terms of hardware and use their kernel github and try to build a test build
Device Tree
https://github.com/CyanogenMod/android_device_sony_yuga
Kernel
https://github.com/CyanogenMod/android_kernel_sony_apq8064
Let me know. Thanks!!!!
Sorry. Got busy at work and don't have time now.
Interesting
Sent from my IM-A860S using xda app-developers app
I found a gitub source for this device github.com/mifl/android_kernel_pantech_im-860s, but i have no time to verify yet
i would like to help since i just got mine today, but i only do android programming and driver compiling, and i never successfully make a kernel that can boot my galaxy s2 and some chinese tabs
Hi Vincent,
I just bought a A860S and want to back up boot/system/recovery partitions, probably all partitions, except the data one.
Do you know anyway to open those official update .binx file?
Thanks.
aget1 said:
I found a gitub source for this device github.com/mifl/android_kernel_pantech_im-860s, but i have no time to verify yet
i would like to help since i just got mine today, but i only do android programming and driver compiling, and i never successfully make a kernel that can boot my galaxy s2 and some chinese tabs
Click to expand...
Click to collapse
I think this is the stock kernel. I think we need to grab a working kernel from Xperia Z or Oppo Find 5 since we are on the same architecture.
totalz said:
Hi Vincent,
I just bought a A860S and want to back up boot/system/recovery partitions, probably all partitions, except the data one.
Do you know anyway to open those official update .binx file?
Thanks.
Click to expand...
Click to collapse
I remembered coming across a CWM mod that can allow you to choose which to backup. You can try ROM Toolbox.
Leechoonhwee said:
I think this is the stock kernel. I think we need to grab a working kernel from Xperia Z or Oppo Find 5 since we are on the same architecture.
Click to expand...
Click to collapse
As long as it boots, and it is a 3.4.0 kernel, i think it will work with cm10
anyway i am checking out cyanogenmod, but i dont find the a860 cwm recovery_ui.cpp source, only binary... i guess i need time to find the button mapping?
You could get answers from SDA.
Sent from my KM-S220 using xda app-developers app
There is a working CWM around in the 91dongji forum - works fine on my A860S with 1.30 software; now updating to 1.36 and see if the recovery sticks.
I'll post detailed instructions here once it is confirmed to work
i hope we can get some update on your efforts. though the crowd for this specific device is fewer than a handful for now, a lot of users are just waiting anxiously for any development....
Is there hope for this device to receive custom ROM?
there's a very active community in vegaviet coming up with mods and roms based on stock.you may want to check them out.
tommyrumbler said:
there's a very active community in vegaviet coming up with mods and roms based on stock.you may want to check them out.
Click to expand...
Click to collapse
I tried flashing the roms from the Vegaviet but i had a problem getting my network to connect. after the restore was complete there was no apn settings for the network. I tried reading but the translations from the website but it dont make sense and no one noticed issue because they are not located in korea.
clockedtouch said:
I tried flashing the roms from the Vegaviet but i had a problem getting my network to connect. after the restore was complete there was no apn settings for the network. I tried reading but the translations from the website but it dont make sense and no one noticed issue because they are not located in korea.
Click to expand...
Click to collapse
so why not set up your APN? that should be easy.
Also, using the ROM from vegaviet, i noticed the following observation :
-there was a considerable build-up of lag after three to four days of use, especially when doing a lot of web browsing
-the browser is unable to open some websites/webpages due to Ad-Block restriction
-the forced DNS settings most times slow-down my internet connection
-the keyboard still retains Korean functionality, with Korean characters sometimes getting in the way when typing
-kernel logging was enabled
much of the above were solved using the uninstall zip of crossbreeder - i just noticed our Vietnamese friends are fond of using cross-breeder on all their ROM mods.
the keyboard i uninstalled and deleted the IME file in system and just replaced it using Optimus G Pro's keyboard IME installer.
everything should be all good. don't ask me where i got those zips - a simple search should do wonders for you.
The rom doesn't allow for setting up your own APN. Those features are not available in JB. Thanks for the tips but I just went back to stock since I wasn't able to get the network going.
Sent from the brightest star in the sky using xda app-developers app

Categories

Resources