ok i need help,i install PA over stock rom on 2.2 firmare,before flashing i maked a nandroid backup,i wanted to sell the phone and wanted to back to stock rom,BUT im stuck at boot loop htc screen because while i flash Pa i flash a PA boot img so i cant boot now stock rom,what is to best advice to back to any rom,can i flash somehow flash boot image of stock rom and where can find that boot img,or something else i can do,when i get into twrp recovery i cant do factory reset its failed and i dont have gapps and PA rom on my sd card that files are no more on my sd card i dont know why,so i cant flash PA anymore,need any help asap
if you are selling it reboot into bootloader and run "fastboot oem lock" then run the 2.20 ruu
DvineLord said:
if you are selling it reboot into bootloader and run "fastboot oem lock" then run the 2.20 ruu
Click to expand...
Click to collapse
i will try thanks
vigorito said:
i will try thanks
Click to expand...
Click to collapse
i dont have in bootloader oem lock?
vigorito said:
i dont have in bootloader oem lock?
Click to expand...
Click to collapse
i run the ruu 2.2 (i didnt find the fastboot oem lock) and the ruu start updating the rom and sending about 5 mins and i get error 155 unknown error the rom update utillity cannot cupdate your anddorid phone please get the correct rom update utillity and try again,can i just go to recovery again and do a restore again of stock rom ( nandroid stock) and then just flash boot image from stock rom but i dont know where can find boot image from stock rom?
vigorito said:
i run the ruu 2.2 (i didnt find the fastboot oem lock) and the ruu start updating the rom and sending about 5 mins and i get error 155 unknown error the rom update utillity cannot cupdate your anddorid phone please get the correct rom update utillity and try again,can i just go to recovery again and do a restore again of stock rom ( nandroid stock) and then just flash boot image from stock rom but i dont know where can find boot image from stock rom?
Click to expand...
Click to collapse
Fastboot oem lock
Type into the fastboot cmd prompt while phone is in fastboot. Then run the ruu
Sent from my One X using xda app-developers app
Myrder said:
Fastboot oem lock
Type into the fastboot cmd prompt while phone is in fastboot. Then run the ruu
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
i did it in command promt i get bootloader lock succesfully
then bootloader tz htc svc disable ret and some numbers
and then failed (status read failed) too many links and in bootloader i see its relocked and some security warning
im running ruu now will se whats gonna happen
bro...i hit thanks!
I was actually wondering about the issue of having to flash the boot.img if restoring a TWRP backup. I assumed that it would have to be flashed via fastboot, since boot.img is obviously needed but can't be accessed by recovery on the 1.14 hboot. But haven't seen that discussed or confirmed here. Doesn't actually apply to my One X, since I'm on the old hboot. More just wondering academically.
Seems like the OP has taken the route of running the RUU. But if you ever need the boot.img for a stock ROM, many of the stock ROMs are posted in Development. So you can download the right one, and pull boot.img from it.
Yes you need to flash boot.img when restoring a backup on hboot 1.14.
Sent from my HTC One XL using xda app-developers app
Thanks for the tips guys, I also used this just now to unroot my phone and return it to bone-stock. I used the All-in-one tool to relock the bootloader and got the same error message that OP got, but after rebooting into the bootloader it said Re-Locked. Then downloaded HTC Sync and the 2.20 RUU and ran it. Took 15 minutes total and my phone looks stock, unless of course some busybody at AT&T decides to check the bootloader.
I am returning my One X and buying a One X + tomorrow morning.
EDIT: Oh and in case anyone is confused, you DO NOT need to flash boot.img in order to flash the 2.20 RUU.
i heard people say that they flashed the twrp boot backup in fastboot and it worked the same as flashing the boot from rom.zip in the ruu. i prefer the ruu method for going back to stock, just seems more official imo.
Related
Hello guys....i have 4ext-cwm4 recovery and i want to install the latest 4ext recovery.i cant acces any rom(my phone stays at htc bootscreen anytime i flash a rom).i need the recovery fast so i can convert my filesytem(in my current recovery i dont have this option)
Can someone give me an PG88IMG.zip with a 4 ext recovery?i searched everywhere on xda and interned without results.
PLS HELP.
any rom i flash the phone hangs at htc bootscreen......any possibilities to solve this <-?
Costinutz32 said:
Hello guys....i have 4ext-cwm4 recovery and i want to install the latest 4ext recovery.i cant acces any rom(my phone stays at htc bootscreen anytime i flash a rom).i need the recovery fast so i can convert my filesytem(in my current recovery i dont have this option)
Can someone give me an PG88IMG.zip with a 4 ext recovery?i searched everywhere on xda and interned without results.
PLS HELP.
any rom i flash the phone hangs at htc bootscreen......any possibilities to solve this <-?
Click to expand...
Click to collapse
I think you unlocked your bootloader with htcdev, if yes you need to extract the boot.img of the ROM and after flashing the ROM you have to flash the kernel (boot.img) with fastboot, but next time search the forum, this has been discussed many times
Swyped from my desire s running damn sweet ice cream
Tectas said:
I think you unlocked your bootloader with htcdev, if yes you need to extract the boot.img of the ROM and after flashing the ROM you have to flash the kernel (boot.img) with fastboot, but next time search the forum, this has been discussed many times
Swyped from my desire s running damn sweet ice cream
Click to expand...
Click to collapse
i need a custom recovery flashable from fastboot....i have s off eng hboot 6.98.2000.i need 4ext recovery...i searched but no satisfying results
http://db.tt/MDDOQJvO
Just rename it and delete the zip extension.
Swyped from my desire s running damn sweet ice cream
tnx!i made it
I have Desire S, and S-OFF. I've uploaded 2.10.8 RUU ....
Any rom i flash the phone hangs at htc bootscreen......any possibilities to solve this <-?
Is the solution if you upload 4EXT recovery.img. Phone will then be uploaded. Thank you.
P.S. Costinutz32 you succeeded, you can write me how you did please?
luky4 said:
I have Desire S, and S-OFF. I've uploaded 2.10.8 RUU ....
Any rom i flash the phone hangs at htc bootscreen......any possibilities to solve this <-?
Is the solution if you upload 4EXT recovery.img. Phone will then be uploaded. Thank you.
P.S. Costinutz32 you succeeded, you can write me how you did please?
Click to expand...
Click to collapse
firstly...what do you want to know exactly?how did i returned to stock?
Costinutz32 said:
firstly...what do you want to know exactly?how did i returned to stock?
Click to expand...
Click to collapse
Want to load a new RUU ver. 2.10.401.8.
Once the RUU install, the phone is not loaded, but remains on the HTC logo, and not go forward.
If you had the same problem please tell me how you resolved? Thank you.
i just reflashed the rom.....that is all......i rebooted my phone into bootloader then i let the ruu do his job.....also try doing a factory reset from bootloader
BUt a question...you are trying to return to stock after revolutionary s off?
Costinutz32 said:
i just reflashed the rom.....that is all......i rebooted my phone into bootloader then i let the ruu do his job.....also try doing a factory reset from bootloader
BUt a question...you are trying to return to stock after revolutionary s off?
Click to expand...
Click to collapse
I do not want to return to the S-ON.
luky4 said:
I do not want to return to the S-ON.
Click to expand...
Click to collapse
Run the ruu without attached device, don't close the the window.
Search inside your temp folder for the rom.zip, copy it to another folder and close the window.
Inside the rom.zip remove the hboot.img and recovery.img.
Flashing with bootloader:
Rename it to PG88IMG.zip.
Put it to the root of your sd.
Reboot to bootloader and follow the instructions.
Delete the pg88img.zip, otherwise it will try to flash it everytime you access the bootloader.
Flashing from recovery:
Put it to your sd.
Wipe all partitions except sd.
Flash it from recovery.
....extract the boot.img from the rom you flash via recovery and put it somewhere in your computer like C:\Android
then when you are in recovery open cmd connect your phone using the cable provided and type adb reboot bootloader
your phone will reboot in bootloader.now type in cmd fastboot flash boot C:\Android\boot.img
then reboot your phone.
@Tectas he doesn t want to return to stock....
Costinutz32 said:
@Tectas he doesn t want to return to stock....
Click to expand...
Click to collapse
That's why the hboot.img and the recovery.img needs to be deleted
Without those he still would stay s-off and with the same recovery, just the system, radio and kernel would be reverted back to stock
ooo i didn t read that.....sorry man
http://forum.xda-developers.com/showthread.php?t=1318919&page=10 also look here
Hi all,
Lately I've dropped my phone a few times so now the screen is pretty messed up, but because I've got insurance I can make them repare it. I just wanted to make my phone completely stock again only i found out to late that I have to flash the stock RUU first and I ran the command "fastboot oem writesecureflag 3" (don't do this to your sensation!!) and as a result I can't flash the stock RUU and I also can't flash any other firmware, right now I'm on 1.23. I've also tried "fastboot oem writesecureflag 0" but it doesn't help.
Does anyone know what I can do?
Thanks in advance!!
Dutch-Guy said:
Hi all,
Lately I've dropped my phone a few times so now the screen is pretty messed up, but because I've got insurance I can make them repare it. I just wanted to make my phone completely stock again only i found out to late that I have to flash the stock RUU first and I ran the command "fastboot oem writesecureflag 3" (don't do this to your sensation!!) and as a result I can't flash the stock RUU and I also can't flash any other firmware, right now I'm on 1.23. I've also tried "fastboot oem writesecureflag 0" but it doesn't help.
Does anyone know what I can do?
Thanks in advance!!
Click to expand...
Click to collapse
why cant you flash stock RUU ? ..if you find a upgradable/incremental one ..you can happily flash it
go to this guide find your corresponding RUU and flash it
EDIT: consider yourself lucky that you didnt got a brick
ganeshp said:
why cant you flash stock RUU ? ..if you find a upgradable/incremental one ..you can happily flash it
go to this guide find your corresponding RUU and flash it
EDIT: consider yourself lucky that you didnt got a brick
Click to expand...
Click to collapse
Thanks for your guide but I've already tried flashing it and I can't flash anything via Hboot, that's why I'm stuck at 1.23. When I flash a RUU from my home screen I get error 171 after it tries to reboot the bootloader and when I try it from fastboot I get error 155, maybe that's because I'm on a AOSP ROM? I haven't been able to flash a sense ROM yet, I've tried 2.3.4 sense 3.0 and 3.5 4.0.3 sense 3.6 and 4.0 no positive results yet, it keeps looping the bootscreen of the ROM itself.
Dutch-Guy said:
Thanks for your guide but I've already tried flashing it and I can't flash anything via Hboot, that's why I'm stuck at 1.23. When I flash a RUU from my home screen I get error 171 after it tries to reboot the bootloader and when I try it from fastboot I get error 155, maybe that's because I'm on a AOSP ROM? I haven't been able to flash a sense ROM yet, I've tried 2.3.4 sense 3.0 and 3.5 4.0.3 sense 3.6 and 4.0 no positive results yet, it keeps looping the bootscreen of the ROM itself.
Click to expand...
Click to collapse
You should run the ruu from fastboot.. That's what guide says isn't it?
Also error 155 means either you ran ruu from normal screen or you have unlocked bootloader
So in your case.. You need to re lock bootloader if you did unlock using htcdev (to re lock fastboot oem lock)
Try the above and let me know
Also did you got the correct ruu based on your cid? If you followed the guide you would
Sent from my Sensation 4G using xda premium
Oh damn! You are my new hero and the best person out there! I was superCID and just flashed a RUU from fastboot and it finally worked!! Thank you so much for helping me fix my phone!!!!
Dutch-Guy said:
Oh damn! You are my new hero and the best person out there! I was superCID and just flashed a RUU from fastboot and it finally worked!! Thank you so much for helping me fix my phone!!!!
Click to expand...
Click to collapse
Glad it got worked
Anyways there is a way to say thanks in xda
Sent from my pyramid.. Through blazing fast sonic waves
Couple quick question regarding locking the re-locking the bootloader.
First off I have the ATT One X rooted with TWRP Recovery. To go back to stock if I so choose, would I have to reflash the stock recovery then do fastboot oem lock before running the ruu or can i just fastboot oem lock the bootloader without flashing the stock recovery, then run the ruu?
I think I have to reflash the stock recovery first before relocking the bootloader. If that's the case, can someone link to the stock recovery img file?
I also read that if you're currently rooted and has your CID, you can update to 2.20 and root again...is that still the case?
Thanks
plmiller0905 said:
Couple quick question regarding locking the re-locking the bootloader.
First off I have the ATT One X rooted with TWRP Recovery. To go back to stock if I so choose, would I have to reflash the stock recovery then do fastboot oem lock before running the ruu or can i just fastboot oem lock the bootloader without flashing the stock recovery, then run the ruu?
I think I have to reflash the stock recovery first before relocking the bootloader. If that's the case, can someone link to the stock recovery img file?
I also read that if you're currently rooted and has your CID, you can update to 2.20 and root again...is that still the case?
Thanks
Click to expand...
Click to collapse
You can just fastboot oem lock, the RUU will take care of restoring the original ROM.
EDIT: This is my 123 post
plmiller0905 said:
Couple quick question regarding locking the re-locking the bootloader.
First off I have the ATT One X rooted with TWRP Recovery. To go back to stock if I so choose, would I have to reflash the stock recovery then do fastboot oem lock before running the ruu or can i just fastboot oem lock the bootloader without flashing the stock recovery, then run the ruu?
I think I have to reflash the stock recovery first before relocking the bootloader. If that's the case, can someone link to the stock recovery img file?
I also read that if you're currently rooted and has your CID, you can update to 2.20 and root again...is that still the case?
Thanks
Click to expand...
Click to collapse
If you want to go back to stock just fastboot oem lock then run the RUU. This is what I did. You can then re-unlock the bootloader and install SuperSU to reestablish root. It's pretty easy. Keep in mind, once you go to 2.20 you can not flash boot.img or radios from TWRP. You have to use adb to flash the boot.img, then boot into recovery and flash the ROM.
If you go into the Dev section, one of the first threads covers this and actually has a guide so you wouldn't have had to ask a question.
danny39 said:
You can just fastboot oem lock, the RUU will take care of restoring the original ROM.
EDIT: This is my 123 post
Click to expand...
Click to collapse
So even though I have a custom recovery (TWRP) I don't have to flash the stock recovery before I relock the bootloader?
plmiller0905 said:
So even though I have a custom recovery (TWRP) I don't have to flash the stock recovery before I relock the bootloader?
Click to expand...
Click to collapse
Here. You don't need the 1.85 RUU though. Just use 2.20 and skip the manual update from AT&T.
http://forum.xda-developers.com/showthread.php?t=1812039&highlight=2+20+unlock
Butters619 said:
If you want to go back to stock just fastboot oem lock then run the RUU. This is what I did. You can then re-unlock the bootloader and install SuperSU to reestablish root. It's pretty easy. Keep in mind, once you go to 2.20 you can not flash boot.img or radios from TWRP. You have to use adb to flash the boot.img, then boot into recovery and flash the ROM.
If you go into the Dev section, one of the first threads covers this and actually has a guide so you wouldn't have had to ask a question.
Click to expand...
Click to collapse
Butters619 said:
Here. You don't need the 1.85 RUU though. Just use 2.20 and skip the manual update from AT&T.
http://forum.xda-developers.com/showthread.php?t=1812039&highlight=2+20+unlock
Click to expand...
Click to collapse
Thanks...I really appreciate it
plmiller0905 said:
So even though I have a custom recovery (TWRP) I don't have to flash the stock recovery before I relock the bootloader?
Click to expand...
Click to collapse
No, it's the opposite: You can't RUU until you relock. It will fail if you try.
iElvis said:
No, it's the opposite: You can't RUU until you relock. It will fail if you try.
Click to expand...
Click to collapse
Oh ok...gotcha...so fastboot lock bootloader then run the ruu...great.
Like I mentioned before...I just got a little confused because people on YouTube is also flashing a stock recovery IMG before running the ruu.
Sent from my HTC One X using Tapatalk 2
plmiller0905 said:
So even though I have a custom recovery (TWRP) I don't have to flash the stock recovery before I relock the bootloader?
Click to expand...
Click to collapse
RUU will restore your recovery to the stock recovery.
Just keep in mind that once you lock your bootloader you won't be able to boot your phone until you run the RUU. So make sure you're ready to go with the RUU before you fastboot oem lock.
Hi All,
I flashed TWRP and installed CleanROM. Now I need to send the phone to fix photo blurry issue. I did restore original telstra ROM.
How can I remove TWRP anh put original recovery image back?
I found the recovery image in TWRP backup folder named recovery.emmc.win. I ran following command and it was successful but when I reset factory the phone, it boot to TWRP and do from there
D:\HTC\Fastboot>Fastboot flash recovery recovery.emmc.win
sending 'recovery' (16383 KB)... OKAY [ 2.404s]
writing 'recovery'... OKAY [ 4.151s]
finished. total time: 6.556s
Click to expand...
Click to collapse
If I lock the boot loader, factory reset failed and boot to boot loader screen with Security warning.
Can someone here please help?
--------------------------------------------------
Edit: is that because the recovery image in backup is TWRP recovery image itself. The original one already is gone?
Thanks.
Post in q and a but run an ruu and your.phone will be back to stock except your bl will say relocked
Hi omario8484,
Can you move to there? where can I find the RUU match for my phone AU Telstra? Can you please help?
I heard wrong RUU could cause serious problem
Thanks.
ncanqn said:
Hi omario8484,
Can you move to there? where can I find the RUU match for my phone AU Telstra? Can you please help?
I heard wrong RUU could cause serious problem
Thanks.
Click to expand...
Click to collapse
There's a telstra RUU here- http://forums.team-nocturnal.com/showthread.php/1005-RUU-One-X-XL-LTE-RUU-s
I don't know what SW version you guys are on, this one might be too old.
_MetalHead_ said:
There's a telstra RUU here- http://forums.team-nocturnal.com/showthread.php/1005-RUU-One-X-XL-LTE-RUU-s
I don't know what SW version you guys are on, this one might be too old.
Click to expand...
Click to collapse
Hi, You are amazing.
My phone details:
HBOOT-1.09.0000
RADIO-0.17a.32.09.03_2
OpenDSP-v25.10.32.0405
eMMc-boot
Apr 2 2012,21:08:24
so this one is good to go RUU_Evita_UL_Telstra_WWE_1.89.841.9_Radio_0.18c.32.09.01_10.93a.32.20L_release_266699_signed.exe ?
appreciate your help.
I have to go all these hassle because of blurry photo. Hope Telstra won't reject warranty because of RELOCKED.
best you can do is relock bootloader and run the ruu. in bootloader run "fastboot oem lock" then run the ruu right away.
DvineLord said:
best you can do is relock bootloader and run the ruu. in bootloader run "fastboot oem lock" then run the ruu right away.
Click to expand...
Click to collapse
Thanks DvineLord,
Most of guide say we need to extract RUU to get recovery.img then run fastboot flash recovery recovery.img before oem lock. should I do that as well?
no you dont have to do that. just "fastboot oem lock" then run ruu.
DvineLord said:
no you dont have to do that. just "fastboot oem lock" then run ruu.
Click to expand...
Click to collapse
Cheers. I will do it now.
Hi All, Mission completed.
You guys are genius.
Appreciated all your helps.
i would still poke around and see if you still have the same camera issue running stock. there is also an updated ota for telstra 2.40.841.4 but if you haven't unlocked using htcdev you might have problems getting root. it might also cause you to have to flash boot.img manually but im not sure since im on at&t.
ncanqn said:
Hi All, Mission completed.
You guys are genius.
Appreciated all your helps.
Click to expand...
Click to collapse
Glad you got it all worked out!
_MetalHead_ said:
Glad you got it all worked out!
Click to expand...
Click to collapse
nice of you to drop by, back from your iphone5 adventure ?
DvineLord said:
i would still poke around and see if you still have the same camera issue running stock. there is also an updated ota for telstra 2.40.841.4 but if you haven't unlocked using htcdev you might have problems getting root. it might also cause you to have to flash boot.img manually but im not sure since im on at&t.
Click to expand...
Click to collapse
Thanks DvineLord. I will send back to see what happens. If they refuse to fix it then I will play around more.
DvineLord said:
no you dont have to do that. just "fastboot oem lock" then run ruu.
Click to expand...
Click to collapse
DivineLord, I also want to revert to the original Telstra ROM. But when I access FASTBOOT the only 'lock' command I see is "SIMLOCK". Is this the option I need to activate to achieve the "fastboot oem lock"?
You hook up the phone to the computer and type that in a command prompt in fastboot like when you unlocked
Sent from my HTC One X using Tapatalk 2
hi, I have a htc one 32gb ,(unlocked but with no root) with team win recovery and i want to delete it. However my htc one does not have a ruu file.
Alp1907 said:
hi, I have a htc one 32gb ,(unlocked but with no root) with team win recovery and i want to delete it. However my htc one does not have a ruu file.
Click to expand...
Click to collapse
If you have the HTC One you're in the wrong forum, this is the HTC One XL forum. You need to go ask in the right place so that people who are experienced with your device can help you.
Sent from my Evita
TWRP Keeps Loading instead of OS!
Hey Guys
last night i decide to install ViperX ROM for my HTC One X (Tegra3) so i first Unlock my Bootloader (HTCDEV Unlock) successfully , download and install the "2.6.3.0 TWRP Recovery" , then Use Fastboot Flash Recovery TWRP.img command to flash my recovery ...
KaaaBooooooom ! Touch is Not Working !
then I download the Hasoon 2000's AIO HTC ONE X Toolkit and install the TWRP 2.4.0.0-JB it worked !
i go and wipe all the options except the External Storage ! , and then SideLoad the VIPERX ROM , and follow the installation Process , it installed successfully , but after restarting , it keeps Loading "TWRP 2.6.3.0" Recovery instead of the OS !
actually when i reboot to BootLoader and and then select RECOVERY , it Loads me the Working 2.4.0.0 JB Recovery .... but when i normally reboot my phone , it keeps loading the TWRP 2.6.3.0 recovery !
i am tired and i want to fix it , please any advises will be strongly appreciated !
Thanks
sobhan1991 said:
Hey Guys
last night i decide to install ViperX ROM for my HTC One X (Tegra3) so i first Unlock my Bootloader (HTCDEV Unlock) successfully , download and install the "2.6.3.0 TWRP Recovery" , then Use Fastboot Flash Recovery TWRP.img command to flash my recovery ...
KaaaBooooooom ! Touch is Not Working !
then I download the Hasoon 2000's AIO HTC ONE X Toolkit and install the TWRP 2.4.0.0-JB it worked !
i go and wipe all the options except the External Storage ! , and then SideLoad the VIPERX ROM , and follow the installation Process , it installed successfully , but after restarting , it keeps Loading "TWRP 2.6.3.0" Recovery instead of the OS !
actually when i reboot to BootLoader and and then select RECOVERY , it Loads me the Working 2.4.0.0 JB Recovery .... but when i normally reboot my phone , it keeps loading the TWRP 2.6.3.0 recovery !
i am tired and i want to fix it , please any advises will be strongly appreciated !
Thanks
Click to expand...
Click to collapse
There are two problems with this post.
1) You're in the wrong device forum, this is the HTC One XL forum.
2) What you're talking about isn't relevant to the thread you've posted in.
You need to head over to the HTC One X forum and ask there, we simply don't have experience with your device here.
Sent from my Evita
---------- Post added at 01:26 AM ---------- Previous post was at 01:02 AM ----------
Try this though, retrieve the boot.img from within the Viper ROM zip, put it in your fastboot folder, connect your phone in bootloader mode, and issue this command:
Code:
fastboot flash boot boot.img
Sent from my Evita
I've got an HTC One S [s3]. CID is HTC__622 Asia HK
I have unlocked bootloader, TWRP recovery and superSU loaded as well as Rom Manger
Tonight there is an OTA update available. So I want to use it. I downloaded it and
ran command: fastboot oem lock
and tried to run the update. It just keeps booting into my fastboot menu.
I heard that I need to install stock recovery tfor this to work but I don't know where I can find it.
I do have a reovery_signed.img file that I saved from somewhere that is 5,957 kb. Not sure if I flash that if it would give me stock recovery.
Can someone give me a direction to go. I have spent last 12 hours just reading stuff and still don't know what to do.
Htc_asia_hk Stock Recovery File
Does anyone know where I can find the stock recovery file for my One S [S3]
Its Htc_asia_hk the CID is HTC__622 ???
The beginning of the file name should look like this:
RUU_VILLEC2_U_ICS_40_HTC_ASIA_HK_
Flash stock recovery
Lock bootloader
Then run the ota update.
Sent from a HTC
Try This RUU in fastboot
http://forum.xda-developers.com/showthread.php?t=2011598
Quills88 said:
Does anyone know where I can find the stock recovery file for my One S [S3]
Its Htc_asia_hk the CID is HTC__622 ???
The beginning of the file name should look like this:
RUU_VILLEC2_U_ICS_40_HTC_ASIA_HK_
Click to expand...
Click to collapse
you dont need to flash stock recovery because RUU does ...
luxandroid said:
you dont need to flash stock recovery because RUU does ...
Click to expand...
Click to collapse
The problem is I didn't take a backup before I unlocked my bootloader and flashed twrp recovery so I don't have a stock recovery to go back to.
The RUU for HTC__044 has a different CID and won't work on my device unless I can extract just the stock recovery from the RUU without having to install it. Is that possible?
same
Quills88 said:
The problem is I didn't take a backup before I unlocked my bootloader and flashed twrp recovery so I don't have a stock recovery to go back to.
The RUU for HTC__044 has a different CID and won't work on my device unless I can extract just the stock recovery from the RUU without having to install it. Is that possible?
Click to expand...
Click to collapse
i also have htc__622 CID and i didn't make backup before fiddling with the innards.
What you have to do is
1. Flash stock recovery
2. Lock your bootloader
3. Enter fastboot and run the RUU for your phone
Your phone will then be just as it was when you bought it and then you can run the OTA. Make sure you find the right RUU for your phone. I have been searchiing for one for days and couldnt find it. Hope this helped
nez762 said:
What you have to do is
1. Flash stock recovery
2. Lock your bootloader
3. Enter fastboot and run the RUU for your phone
Your phone will then be just as it was when you bought it and then you can run the OTA. Make sure you find the right RUU for your phone. I have been searchiing for one for days and couldnt find it. Hope this helped
Click to expand...
Click to collapse
I have the same problem, so I have few questions....
Where can I find stock recovery for HTC One S c2?
How to lock bootloader?
THANK YOU!
I have a question.
I already flash 4.1.1 via OTA and use some bloody init.d script for R/W system, that doesnt work and gives me reboot after I enter into supersu app.
My question is... how can i flash 4.1.1 again (i wanna clean system, just for better feeling.) If Im using TWRP recovery? Because, ota file doesnt contain stock recovery as RUU does and I didnt find any ruu for 4.1.1 CID_032 | villec2.
sorry, for my bad english.
Privremeni said:
I have the same problem, so I have few questions....
Where can I find stock recovery for HTC One S c2?
How to lock bootloader?
THANK YOU!
Click to expand...
Click to collapse
Hi,
You can lock your bootloader with next command in fastboot:
fastboot oem lock
But question remains
Where can I find stock recovery for HTC One S c2?
Somebody cab help us?
Thanks!
Impo5sible said:
I have a question.
I already flash 4.1.1 via OTA and use some bloody init.d script for R/W system, that doesnt work and gives me reboot after I enter into supersu app.
My question is... how can i flash 4.1.1 again (i wanna clean system, just for better feeling.) If Im using TWRP recovery? Because, ota file doesnt contain stock recovery as RUU does and I didnt find any ruu for 4.1.1 CID_032 | villec2.
sorry, for my bad english.
Click to expand...
Click to collapse
You cant flash OTA trough TWRP, thats my problem also. My CID is 032 as yours. If you find RUU JB, send me the link please!
Privremeni said:
You cant flash OTA trough TWRP, thats my problem also. My CID is 032 as yours. If you find RUU JB, send me the link please!
Click to expand...
Click to collapse
Maybe a stock recovery of JB would be enough.
Hello guys,
Try this:
Step 1: relock the bootloader (start your phone in fastboot, open cmd, got to folder where are fastboot files, type "fastboot oem lock" )
Step 2: find your desired stock jb or ics online. http://filesdownload.net/showthread.php?70-HTC-One-S-(-RUU_VILLE-)-(-RUU_VILLEC2-)
Step 3: connect your phone to the pc in fastboot (make sure you have the htc drivers installed).
Step 4: run the RUU or stock file as an exe. An installation guide will follow, just follow it through.
Step 5: Now you are in stock ROM
It should work after this!
On my HTC One S [S3] , CID HTC_032 works
splanet.info has something interesting
At least ota is there for htc__622
Nez is right
nez762 said:
What you have to do is
1. Flash stock recovery
2. Lock your bootloader
3. Enter fastboot and run the RUU for your phone
Your phone will then be just as it was when you bought it and then you can run the OTA. Make sure you find the right RUU for your phone. I have been searchiing for one for days and couldnt find it. Hope this helped
Click to expand...
Click to collapse
After I locked my bootloader and tried running the OTA update I tried a few things that didn't work.
But what did work for me was when I unlocked bootloader again
And used Hasoon's Toolkit for One S
and reflashed the recovery file. I used the recovery_signed.img file (5,957 kb) that I had saved from when I was rooting it the first time and renamed it to a one word name per Hasoon's instructions, then flashed it.
Then I relocked bootloader and did a factory reset and ran the OTA update and it worked.
I was lucky that I had that recovery file saved. Still not sure where I got it from. But one thing for sure is that it was hard to find a RUU file for my CID. Hasoon's toolkit does have links to a website with a list of RUUs on it but mine wasn't on the list.
If you want me to email you my signed_recovery.img file send me a pm with your email address and I'll send it.
Privremeni said:
I have the same problem, so I have few questions....
Where can I find stock recovery for HTC One S c2?
How to lock bootloader?
THANK YOU!
Click to expand...
Click to collapse
I have attached the stock recovery just use fastboot to flash it