There are 3 configurations to mod this case. Since the original bumper case cost $20 and you can mod with different colors cases, this cost $4. If you can find any other cases that's cheaper, than it's a plus.
I labeled where to cut in numbers (1,2,3). How far you want to mod is up to you. Be safe and wear gloves when you're cutting the case. I'm not responsible for any injuries or broken parts in this mod.
1. Cut at box 1 all the way to the right edge. Reasons (sounds doesn't come out as good when you laid the phone on it's back). Skip this step if you're doing a bumper case and go to step 3.
2. Cut at box 2, if the front of your case on both sides is grabbing the phone. Reasons (original design to touch smoothly all the way to the edge) Skip this step to step 3 if you want for a bumper case.
3. Cut at box 3 on the back of the case close to the border. Enjoy!
Sample picture of a N4 case.
sweet
How did this end up?
Sent from my Nexus 4 using Tapatalk 2
Show us the result
Subbing for end results/photos.
Fails...bumper requires stiff or smaller shaped plastic to maintain shape...didn't work out for me...
Sent from my Nexus 4 using xda app-developers app
androph said:
Fails...bumper requires stiff or smaller shaped plastic to maintain shape...didn't work out for me...
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Figured that would happen. Thanks for being the guinea pig though.
Sent from my Nexus 4 using Tapatalk 2
Related
Just got my new note and i cant determine if theplatic on the back should be removed. Did everyone elseremove it?
Sent from my GT-N8013 using Tapatalk 2
It's just for shipping protection. Feel free to remove it.
Sent from my GT-I9300 using Tapatalk 2
evodon84 said:
Just got my new note and i cant determine if theplatic on the back should be removed. Did everyone elseremove it?
Sent from my GT-N8013 using Tapatalk 2
Click to expand...
Click to collapse
I wanted to keep it on, but it wasn't on straight on my tablet and had one side slightly hanging over the edge creating an annoyance whenever I would hold the tablet. I thought about snipping off the edge with something sharp, but later decided to just yank the entire thing off.
I miss the feel of how it was with the plastic on. It felt a little bulkier and easier to hold one handed. The tablet now feels thinner. Also, my tablet slightly creaks now (it didn't before), so I wonder if the plastic increased the thickness which helped the tablet to stay sturdy? Or maybe creaks comes with more use.
If I got a new one, I would just snip off the edges.
Ok cool i removed it, thanks
Sent from my GT-N8013 using Tapatalk 2
I use the Xtreme guard body protector on mine, There was a coupon code you could use if you got 3 things - 80off3 - that I used to get my screen and body protector for the Note 10.1, SGS3 and Note. Fits well, feels good and protects the plastic backing. Don't need to put the screen guard on if you don't want to.
Using coupon reduced price from $90 to around $25...
Not sure if code is still good but you could at least try...:good::laugh:
So I received my Nexus 4 Bumper today. I was using the Ringke Slim case which was a defective because of the warping of the side near the volume button. Also today I received the replacement for the slim case so I decided to make a faceplate to add onto the bumper. The back is nice with its patterned dots but for now I am going for protection until there are better screen protectors out there.
Decided to cut the defective case to be a faceplate for the back of my phone. Still experimenting how much to cut the side but this is what I have. Some problems so far is that it gives it an extra thickness to what Google originally had for the bumper. So when holding the phone on the edge it has this popping feel. If I cut more of the side of the case this might eliminate the problem. You still get the lipped edge around the screen. Buttons still work but I didn't get the nice satisfying click. But I will work with the sides of the faceplate again
Thought I would share this even though it might seem useless a bit
Make sure Apple doesnt steal this design:beer:
HTC Evo V 4G F/S $150 (x2 extended batts,x1 OEM batt,x1 black trident kraken case,Zune headphones,8gb micro ad card)
It came out nice man great job! A true mygyver
Sent from my Nexus 4 using xda app-developers app
Nice job! Looks fantastic! But one thing though, it reminds me of a nexus s now lol.
kpjimmy said:
Nice job! Looks fantastic! But one thing though, it reminds me of a nexus s now lol.
Click to expand...
Click to collapse
Hahaha! That's the first this I thought when I saw it.
Looks good though :good:
Looks great. Thinking of trying this with a clear case...
Sent from my Nexus 4 using xda premium
Nice work! I was thinking of doing the same thing. Can you please take a pic that shows how much of the slim case you cut away?
Sent from my Nexus 4 using xda premium
.A.J. said:
Nice work! I was thinking of doing the same thing. Can you please take a pic that shows how much of the slim case you cut away?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Well I was experimenting with it too much and cut the case where it doesn't fit as nicely compared to before. You need some kind of edge around so it doesn't simply fall out of the bumper. Just experiment as you go and place the faceplate then your phone in
Interesting.... and looks very nice to the very least haha. I would totally buy this if it was a case
sounds like a plan
I originally bought this case to be able to use the galaxy nexus in the car as a gps. The case offered a convenient solution. There is a magnet under the pattern. Then when I got the N4 and i missed being able to mount it in the car. Still having the case i decided to modify it in order to use it on the N4.
PARTS
-Galaxy nexus Wallee case from http://goo.gl/Vs7uJ 30$
-Car mount http://goo.gl/C2jxI 35$
-Cheap case for the N4, this is the one I used, goo.gl/yY9Bi 10$
Step 1
-Drill a hole in the center of the X, this is important for the next step
Step 2
-Cut a circular hole around the X shape with a dril. This part may be hard to find, my dad is carpenter so he had one handy.
Step 3
-Use sand paper or a file to clean up the edges of the disc
Step 4
-Use super glue, or any strong glue to join the X shape to the cheap case
And there you have it, it may be a bit pricy to buy the case and the car mount, in my case, i already had them, so all i spent is 10$ on a cheap case. But its such a convenient mechanism in the car.
Also, the dash mount is really high quality, the phone doesn't shake when you drive like most cheap ones.
Give me some feedback
LINK TO MY ORIGINAL POST ON G+ http://goo.gl/9SpIL
Some pictures, they can all be viewed on the google+ post also goo.gl/9SpIL
chrisMBP said:
Some pictures, they can all be viewed on the google+ post also goo.gl/9SpIL
Click to expand...
Click to collapse
Nicely done!
Cheaper option....
http://www.amazon.com/Cradle-less-Quick-snap-Technology-Smartphone-Windshield/dp/B008IOQ3K6
Sent from my Nexus 4 using xda app-developers app
looks really good, does the magnets have any effect on 3g or gps signals?
neotekz said:
looks really good, does the magnets have any effect on 3g or gps signals?
Click to expand...
Click to collapse
I have a magnet on the back of my phone for my Steelie. GPS/Signal/compass etc. you name it, is not affected by a magnet. I have a neodymium earth magnet on mine and no harm no foul.
The metal plate that sits underneath the case kills NFC. Read review (by nexus 4 user) on amazon with 3 star rating.
Sent from my Nexus 4 using xda app-developers app
now my nexus 4 back cover is broken , i saw 2 covers replacement.
http://diggloving.com/original-battery-door-housing-cover-case-for-lg-nexus-4-e960.html google nexus 4 back housing cover
http://diggloving.com/brand-new-lg-nexus-4-e960-back-cover-glass-lens.html google nexus 4 back glass lens
What are the difference?
Go with neither
Neither is good !!
Go with this one guaranteed and including all the parts of The original !!
Just Unscrew, Replace, Rescrew, DONE !!
Can't insert links !! Just Google This code "ACQ86231201"
I wish somebody would just make a plastic back cover. It would be much more durable.
Sent from my Nexus 4 using xda premium
I agree that you should spend the extra $30 and get a complete unit but to answer your question the first one is the back cover and the second one looks to be just the glass that would sit inside the frame.
N4ever said:
I wish somebody would just make a plastic back cover. It would be much more durable.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Yeah I'm surprised this hasn't come about, though I assume it's because of the complexity inherent in swapping the back.
Hi! I buy this bumper on ebay, and I think is very good choice for galaxy s4. Here the link : http://pages.ebay.com/link/?nav=item.view&id=300908845468
Only thing is the metallic frame must to slide on protector or plastic, to noot damage the screen
Neat! I wish Taurus would make aluminum bumpers for the S4 ,I loved mine for the s2,..only needed that bumper , screw it on you could take the back battery cover off with the case still on,...made it so easy to switch batteries,..and was very sturdy
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
The good thing on this, is the price. Taurus maybe is better but much more expensive and more bulky. No screws on this, only slide frame
So want this but with a flip down cover to match the old s2 cover...
Sent from my GT-I9505 using xda app-developers app
Does it fit tight?
Yes, it has rubber inside.
Curious about signal drop with this on. It plagues other aluminum cases and battery covers.
Sent from my SGS4. Go Blue!! Buck the Fuc keyes!!
Is just a bumper. No drop the signal. With battery cover drops.
Update : missing the hole for the microphone on top.. I made it right now. 3mm drill.
though being on work I'm unable to go with the link given here . but surely will catch up it at night .. and if seems suitable it'll get a deal from me..
There more sellers on ebay with this bumper. This is chipper, and is come with normal screen protector and stylus. Outside off eBay on different sites, cost 29€..Oo..and there more different models on ebay also. From China directly is 8€ only
I'm gonna order one too, cheapest I found so far: $6.57 eBay
I dont like the sliding connector thing... the videos ive seen show the slider being kinda loose. I might get one that screws together instead.
Sent from my SPH-L720 using xda app-developers app
I think these are better overall.
I will provide link if asked
Sent from my SGH-M919 using Tapatalk 2
Xcor3 said:
I think these are better overall.
I will provide link if asked
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Please do for the first one :good:
xmsnx said:
Please do for the first one :good:
Click to expand...
Click to collapse
here you go sir http://www.aliexpress.com/item/2013...er-for-Samsung-Galaxy-S4-I9500/952873724.html
Wat about this :
I would recommend going with a bumper that takes screws instead of the slide on bezel. The slide on bezel tends to slide off and get things caught in it.
Xcor3 said:
here you go sir http://www.aliexpress.com/item/2013...er-for-Samsung-Galaxy-S4-I9500/952873724.html
Click to expand...
Click to collapse
Dangit... I had made up my mind not to get a bumper and to get the NEO.... now I might have to get that thing.