Hi
I just got my Galaxy Note 10.1, model number N8005. It's the model that is sold in Turkey, has 3G&WiFi connectivity but can't make phone calls.
I'm really sorry before if this question had already been asked, but I couldn't find it anywhere.
Anyway, after unboxing it I decided to update the android version to the 4.1 Jelly Bean directly, by using the German rom.
The process in Odin start smoothly until it starts to install the modem.bin file and then it fails. I tried repeating the installation process about 5 times, changing usb ports, restarting computers, and it still fails at modem.bin. I forgot to take screenshot but the modem.bin file is installed after the recovery.img and system.img.
The tablet won't boot up after this process, it only shows the update failed, please connect to Kies screen. Since I don't know what to do anymore, i tried rooting it by using Odin and magically it succeed and the tablet start up normally. I checked the android version and it shows 4.1.1
The tablet runs pretty normally, except that the S Note application won't start. Everytime I open it, it immediately force close.
What I want to ask is what is the cause of error Odin fails in installing modem.bin file? Is this okay since there are still some file that odin hasn't installed yet (hidden.img, boot.img, cache.img and modem.bin)? (Also is there any way to fix the S Note app so it would run normally again? Should I try installing other rom again using Odin?
I'm pretty scared to install rom using Odin again now
Thank you.
(I'm sorry if I posted in the wrong section)
Related
Hi everyone,
I'm using Galaxy SII and I have been trying custom roms many times but I never come a cross anything like that, this is why I'm writing and this is why I need your precious help (Anyone)
Before anyone asks this is what happened:
I was using Resurrection Remix ics v1.9.1 - 4.0.4 and I want it to go back to ICS 4.03 Stock rom but when I tried to make a clean wipe and everything Recovery mode crashed basically it was not functioning so It kind a forced me to flash a rom without clean wipe. (I believe that was a huge mistake). And this is where I meet with SBL.BIN and NAND WRITE START First time I flash a rom with Odin it got stuck in sbl.bin mostly... Anyway since then I can't flash a rom keep getting stuck...
So at the moment I can go into Download mode with 3 button, but can't get into recovery mode. When I open the phone at the screen it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I tried with kies but did not connect, right after I closed kies (I made sure that It was not running on the background) I tried everything which stated below;
What I have tried:
Well I tried many things like, using different USB port or cable, Different Odin 1.82, 1.83, 1.85, Different roms only .tar rom or CSC,Modem,PDA type rom and still can't flash a rom cause its keep getting stuck on sbl.bin...
Your help will be appreciated, If you can help me I'm willing to buy you a beer
Thanks in advance for your help... [/B][/B]
GS2
Can someone help me??? Or there is no one that understand what I'm talking about???
having the same problem.. what shoul i do if odin stuck on sbl.bin setup connection?
thanks!
i got a s4 from my friend. he said he was doing a OTA update and the phone just cut off. now when he turns on the phone the galaxy s4 logo just keeps rebooting. i tried to root it to put cwm but it just keeps rebooting. But when i put it but odin tells me there is no pit partition.
i did further research and tried looking for the pit file of the galaxy gti9500. i found the pit file for a gti9500. the name of the file was called adonis.pit when i unzipped it. i dont know the baseband version of it to even download the factory imnage back on it. i tried everything.
can someone give me some advice please.
i tried to download a panama stock rom and insert the pit file in odin. but odin gives me this message
cant open the serial (COM) port.
please i need help in this matter
also i tried connecting the usb plug in the back of the motherboard.
is there any like universal rom that will work.
its u international factory unlocked s4.
i think i have emmc brickbug; My GT-N8000 is on UDNE4 firmware (stock German kitkat).
One night it shut down, and i can no longer access the system nor recovery. when i try to access the system, it restarts randomly during the Samsung logo (after the Samsung Note 10.1 page), and when i try to access recovery, it shows a black screen for 2 or 3 seconds, then reboots.
I can access download mode, but whenever i try using odin for flashing kernels, flashing bootloaders, flashing roms(one file or multi-part), removing batteries, flashing the latest kitkat rom (UDNE4, UDNE5, UDNE6),flashing recovery, modding roms(removing sboot.bin and tz.img), but i get "NAND Write fail error". when i try flashing the pit at http://forum.xda-developers.com/show....php?t=2268735 , i get "repartition operation failed". I tried the following odin versions : 1.83, 1.85, 3.04, 3.07, 3.09.
I tried different pcs, different cables, different ports (of all 3 gernerations(usb 1.0, usb 2.0, usb 3.0)). I tried reinstalling samsung drivers and uninstalling kies. I tried using heimdall, but i get "libuser error = -7". I honestly don't know what this error mean, so i would like someone to explain it for me.
I read at ( http://forum.xda-developers.com/gala...icked-t1619571 ) that repartitioning might help, and therefore i need the appropriate pit. I am also considering NAND erase all, but please do let me know whether i can rely on this option. The pit i need is for the 16GB version of GT-N8000. And if repartitioning is not the solution, what should be done?
P.S: Whenever i flash a bootloader, the download mode shows invalid magic string.
P.P.S: I don't want to hand it to samsung just yet, because my warranty is over.
P.P.P.S: in download mode, i can see my model number, although my SYSTEM STATUS is shown as CUSTOM, even though i have a stock system (but i don't think that this is quite unusual, since it is rooted)
P.P.P.P.S: i have philz touch cwm recovery
Sorry for the very long post
Any help would be really appreciated
Thanks in advance
How could my device be saved? I am willing to risk everything to get it to work again, but i am not considering replacing the motherboard.
The device is now a paper-weight that can only access download mode, but can not use it.
P.S: I tried using nand erase all, but i received Complete(Write) operation failed.
I have the exact same problem. Hope some one can come up with solution. Tried all options above. Very depressing.......
Rescue package
I have seen Rescue packages for phones like S3 which helped recover some bricked devices; What are they?And is there such thing for my device?Would a Rescue package do any good in this state?
Is there other programs to try other than odin or heimdall?
So I tried to root my Samsung Galaxy S6 today using TWRP and it got stuck in a boot loop. I went to wipe to cache and accidentally wiped to system. So now there is no OS installed. I know I need to somehow put an OS on the device but I'm in Canada and when I go to samsung's site to download the firmware, there is no Canada option. I bought the phone off of amazon and it came with a European wall charger because it was imported, but how do I know what firmware to download?
Also, when I have found the right firmware, how do I flash it onto the device? I can no longer access TWRP, all I can get is the downloading screen thing. Can I use Odin/how do I use Odin?
Somebody help me I'm panicking because I broke my brand new phone!
You should check the Amazon listing to see which model number you have. It's probably SM-920F.
Once you have the correct firmware downloaded, Google a guide to flashing Galaxy S6 firmware with Odin. There are a lot of them out there.
krisztiana said:
So I tried to root my Samsung Galaxy S6 today using TWRP and it got stuck in a boot loop. I went to wipe to cache and accidentally wiped to system. So now there is no OS installed. I know I need to somehow put an OS on the device but I'm in Canada and when I go to samsung's site to download the firmware, there is no Canada option. I bought the phone off of amazon and it came with a European wall charger because it was imported, but how do I know what firmware to download?
Also, when I have found the right firmware, how do I flash it onto the device? I can no longer access TWRP, all I can get is the downloading screen thing. Can I use Odin/how do I use Odin?
Somebody help me I'm panicking because I broke my brand new phone!
Click to expand...
Click to collapse
On the back of the phone it should say which model you have, for example G920F, G920W8, G920P etc.
Download the proper firmware from Sammobile, then follow the tutorial that the following thread has a link to.
http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
If the variant you have is the European model, G920F, I recomend you install the unbranded firmware.
IMPORTANT! MAKE SURE YOU HAVE THE PROPER FIRMWARE! INSTALLING THE WRONG FIRMWARE CAN HARD BRICK YOUR DEVICE!
I really hope this advice helped!
Really important is only that you pick the right model to download. The region isn't that important. Go to sammobile and download your stock rom, but be sure to not pick a branded one, because they are full of junk.
Also, you must use ODIN in that Download-Mode. Open ODIN, plug your device into your pc and see, if ODIN shows up your device. If yes, select "PDA" or "AP" (depending on ODIN Version) and select your ROM that you have downloaded. Then click on start. Don't touch your phone, your cable or your computer for best results. Wait ODIN say "PASS" with a green background. If this occurs, your phone should restart and after 10 mins or so, it should boot Android.
I did the same this as the OP, now I am stuck on the main "Samsung Galaxy S6 Edge Powered by Android" screen. I can boot into TWPR and into download. I have tried flashing zip from external SD card with USB-OTG with no luck, I have tried flashing from Odin, multiple Odin versions tried, multiple usb cords tried, multiple computers tried.. all result with <ID:x/xxx> Can't open serial(COM) port."
No matter what I do, I can't seem to get anything to take, not stock firmware or otherwise. Any suggestions.. donations for anyone who can help me solve. lol $$
dwall87 said:
I did the same this as the OP, now I am stuck on the main "Samsung Galaxy S6 Edge Powered by Android" screen. I can boot into TWPR and into download. I have tried flashing zip from external SD card with USB-OTG with no luck, I have tried flashing from Odin, multiple Odin versions tried, multiple usb cords tried, multiple computers tried.. all result with <ID:x/xxx> Can't open serial(COM) port."
No matter what I do, I can't seem to get anything to take, not stock firmware or otherwise. Any suggestions.. donations for anyone who can help me solve. lol $$
Click to expand...
Click to collapse
i'm in the same situation , stuck in bootloop for the last 3 days ive tried everything on youtube and forums , with odin with smart swich with kies with twrp , nothing , same bootloop everytime. don'tknow what to do .....
get the model number of your phone and flash the latest firmware through Odin
Milian90 said:
i'm in the same situation , stuck in bootloop for the last 3 days ive tried everything on youtube and forums , with odin with smart swich with kies with twrp , nothing , same bootloop everytime. don'tknow what to do .....
Click to expand...
Click to collapse
In odin under options untick Auto Reboot.
Flash Rom
Phone wont reboot once rom has flashed successfully so you will need to do manual reboot.
Go into recovery mode and wipe data.
Reboot phone
that should help let us know if it works
wifi wont turn on
hi, i managed to install the firmware but now the wifi and bluetooth wont turn on, wifi toggle and bluetooth wont go on, it looks like is trying toget on but after 20 seconds justgo back to off. idont know what to do .........
I can't even get any firmware to load as odin continually stops within seconds of starting to flash phone, no matter what firmware I choose it's the same result failed flash?
Last night my mom asked me if I could format her tablet, because it was too slow (Even for that device), and had a lot of crap on it.
So... I took a look at it and started to google about the tablet. Turns out it hadn't been upgraded to the latest firmware; it was on Android 4.1.2, and as it says here: "sammobile.com/tag/gt-p3100/" the latest available firmware is 4.2.2 .
Thus I tried to update it via software update on the device, but it turned out it wasn't able to update because the tablet has been modified. Then I remembered that a long time ago I tried to root it without much success, but didn't try again because I got bored.
Then I downloaded the 4.2.2 firmware UK version (P3110XXDMH1_P3110OXADMH1_BTU), and flashed it via Odin. Sadly it went wrong and a "Failed!" sign appeared. I can't remember what step failed, but it booted anyways, but this time my PC recognized the device as a "GT-P3110". I thought that maybe it was because the UK firmware was a Vodafone version, so I downloaded the Russian brandless version (P3100XWDMK1_P3100SERDMK2_SER) and flashed; it failed again, but this time the tablet didn't turn on normally.
I can't boot it neither normally, recovery or Download mode, it shows only a message that says "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again", which as I read on other android sites and this forum, it's a soft brick message.
Then I tried to do as it said, installed Kies and tried to fix what I've done, but when I enter the device data (Model and "S/N") it shows a message saying that the model info cannot be verified and that the device initialization can't continue.
imgur.com/Y89rnNg
imgur.com/OdZhT6C
So... This is as much info as I can remember about what could've gone wrong, please help me, if I can't fix it, mom will continue to be a liiiiittle too much angry
Beforehand thank you very much.
PS: I had to write wrong the links because I created this account just because I had this problem, so I can't post links.
Woah this happen to me once, but i try to flash it again and its work, this happen when i chose the wrong firmware zip, but it work when i instal the right one, maybe u flash wrong firmware bro, try flash the right rom bro
this message is like download mode, you can connect to pc and flash any firmware via odin
Yes, as said you can go in Download Mode and reflash another good ROM ! Make sure the .tar.md5 is not corrupted.