I was looking for a simple custom ROM that ran my apps smoother when I ran into this version of an old CM ROM http://android-roms.googlecode.com/files/cyanogen_JFv1.51_CM3-ADP.zip . I was wondering if there would be a build like this for the new 1.6 donut firmware, because the newest CM build gives me the problem of laggy/sticky keys on some of my games, where as the normal rooted build just ran slower. Any thoughts?
el_cabron said:
I was looking for a simple custom ROM that ran my apps smoother when I ran into this version of an old CM ROM http://android-roms.googlecode.com/files/cyanogen_JFv1.51_CM3-ADP.zip . I was wondering if there would be a build like this for the new 1.6 donut firmware, because the newest CM build gives me the problem of laggy/sticky keys on some of my games, where as the normal rooted build just ran slower. Any thoughts?
Click to expand...
Click to collapse
maybe you should contact him and talk about the differences
Please justify placing this in the "Android Development" section (although it may be permissible in the CYANOGENMOD thread).
Go.
I was hoping that there were some subtle differences that made the apps run smoother, and if that could be replicated for the new firmeware. This version was stripped down (no battery graphic on lock, 3 screens not 5) and it was the smoothest/fastest I could find, but it wasn't like the other mods. It was also very stable. Sorry for starting a new thread if I could have just posted in one of his CM threads.
cyanogen advised if you had problems with games running slow to disable the lock home app in memory option in spare parts which should free up some more ram, have you tried this?
I have had this same issue on his older builds as well, so the keep home in memory option is not the issue. The game would be working no lag at all, but the response to button input stops for a few seconds, while the game still continues lag free.
Hi all,
Sorry for posting my question here, I'm not allowed to ask this within the dev thread. I was satisfied with the named ROM since I have flashed the two new v2.0 and v2.1 versions. It takes a while and a lot of reboots to improve the performance of those two versions, for example the sliding between the homescreens.
But when I slide to homescreens with widgets like friendstream, calendar or contacts it's very laggy. But not with the ROM version v1.0 RC3.
But in my opinion the biggest problem is when the phone is on standby mode. When I unlock it after nearly 6 - 8 hours, it seems that only one cpu is working with less than 500 MHz. It's too laggy to use and that I haveto reboot it.
But that's not a solution, only a workaround
Are there any ideas to solve it? Maybe there is a problem with the dual core script?!
Thanks in advance and greetings from germany.
Chris
Hi,
I've recently put Awesome ICS 3.6 into my Glacier and aside from a few tweaks, the ROM is very good. Probably the most complete ICS rom available for this device.
However, there is only one issue that I've been having. Japanese Characters will not display anywhere throughout the ROM or in Applications.
I'm not sure if this is a ROM issue or a Kernel issue. I was hoping that someone could point me in the right direction for resolving this.
Thanks.
For anyone else having issues displaying Japanese or Chinese text, I found a similar posting in the Awesome ICS Dev thread:
http://forum.xda-developers.com/showthread.php?p=26848771&highlight=japanese#post26848771
Yes sorry I had taken a lot of stuff out the rom to make it lighter didn't think that would make a difference but I see it does will re add it next time
Sent from my HTC Glacier using Tapatalk 2
Above posting worked, but the author didn't post the file required. I've attached it to this post. ADB the file in the archive (inclusive of path) to the phone and restart.
This file should work with just about any ROM since it is only a TTF file.
Not a problem. I think this ROM really is amazing. I had to work out a couple kinks.
- Japanese font support (had to add the aforementioned TTF font)
- CPU Clock Management "AX Control" in system panel doesn't work, workaround is to use "ROM Toolbox" for changing frequencies and govenors
- Tried Tiamat V2 kernel, but stability was a problem with a few applications ie. PowerAMP. MDEEJAYs Kernel has been stable. I'm not sure why but problems went away after the kernel switch.
And thank you for your reply. I think you guys have done good work here. Given the age of the MT4G (Glacier), I expect this to be the only ICS ROM that will reach full completion. I think many others have moved on for development.
Hi everyone..
here iam going to ask any advanced user or dev about a bad bug bada 2 has it..
1-when i run some of games as ( sparkle - hero of sparta II - final strike 3D - Indigo Hunt .. ) , i find that media volume is getting low from level 15 to level 4 ..and sure this low volume make the sound game gets so low ..even if i pause the game and increase the media volume again to the max level (15) then return to the game.. i get media volume back to level 4 and sometimes less .
2- About Notification bar ..the most bada users feel this bad bug. unfortunately notification bar gets more laggy not as the beta FW of bada 2.0..!!. and i tried before to handle this bug by many ways and methods but nothing has changed to the best.
So... iam inviting the all here to share me this issues and any replay or post may help .
waiting for all your ideas .
my regards .
PS ..the only FW has no any problems as what i've told..it's S8530XPKJ1 Bada 2.0 Beta ...I know this FW has another Bugs except the media Volume and notification bar bugs,,but it's system sound is so perfect.i just said that for knowledge.
Sorry. At the moment no real idea for solution...
Maybe I'll try S8530XPKJ1... if I have more time...
Best Regards
Re
adfree said:
Sorry. At the moment no real idea for solution...
Maybe I'll try S8530XPKJ1... if I have more time...
Best Regards
Click to expand...
Click to collapse
Dear @adfree :-
i posted here after many so much efforts by me to discover the reason of these issues and how to solve it..and some special friends tried to help me as Hero355 & mylove90 but no way.... But i have notice the following points :-
* because this FW XPKJ1 is beta ..so..it's so hard to modify depending on any official FW of bada 2 .
* i just wanted to add arabic keyboard but all my try gots failed..because the white keyboard in this FW..but in any official release the keyboard is black as you know.
* also these days iam trying to solve the problem with lock screen hanging with this Fw may i ca fix it..
so,,if anybody has any idea about solving all the issues which i've told about..plz share it for me and the all ..
SImply...this FW is the best if we can fix the little bugs it has.
my regards
dont have whats app for badda , sony in symbian have , every moobile have whatsapp ,
bada no have
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Hi
Unofficial LP 5.1 Rom 01072015
Changelog
Baseband: Reverted to an older version (More stable than the latest Beta4)
GAPPS (minimal)
Pre-Rooted (with Chainfire's SuperSU)
Reverted rear / front camera Main Drivers (blobs) , more stable (when compared to latest Beta4 )
Storages are swaped (I think we all like it this way ?)
Smartwake added (Settings > Smart Wake)
Double click to wake screen
Draw up to unlock
Draw Down to pause music
Draw right to switch next song
Draw left to switch previous song
Draw C to awake camera
Draw e to awake
Draw w to awake File Manager
Draw m to awake Music
Draw o to awake Phone
Removed:
NFC :
Why?
--> Unstable and Battery Draining
Several other small fixs
BUGS:
You Tell me
GPL compliance
--> The rom uses the Official LL ROM, BETA4 STOCK Kernel binary
How to install:
First of All: BACKUP, BACKUP, BACKUP ...
This is an full SPFT Rom set, so, as always, you need the proper MTK VCOM drivers and S.P.FlashTools installed.
If your still on KitKat Layout: Use the Firmware Upgrade Option
If your already on Lollipop Layout: simply use the Download Only Option
The Full Rom set, includes TWRP LL (from @DerTeufel1980 )
Rom Download:
https://www.androidfilehost.com/?fid=24052804347767398
Credits:
MTK /Jiayu / Vanzo
Based on iocean rom
DerTeufel1980 / Jiayu.DE ( LL twrp / awesome guys / All the support / Sorry my Bad German )
Chainfire( SuperSU )
ALL this lovely community ---> Yes, YOU !
If you want a fully working and Stable Rom: Stay on latest KitKat ...
Cheers
I had to create an new thread.
XDA DevDB Projects are not being added into our Device's Forum Tag ...
Thanks
Great:good:
Is it TWRP 2.8.4.0?
Hello!
I am using the previous version. Is it possible to upgrade ?
Regards and thank you for your awesome job !
pl4za said:
Hello!
I am using the previous version. Is it possible to upgrade ?
Regards and thank you for your awesome job !
Click to expand...
Click to collapse
Would be nice.
superdragonpt said:
[...]
Storages are swaped (I think we all like it this way ?)
[...]Cheers
Click to expand...
Click to collapse
Does this mean /storage/sdcard0 is on external SD? If so, can it be an ext4 filesystem or does it have to be vfat?
Can you provide outputs of 'df' and 'mount' ?
Have a nice day
I have Beta4, but trouble with Bluetooth. Is this fixed?
I cant seem to unable 4G.. is this rom related or maybe my sim card ?
btw i'm from Portugal.
regards
Anyone suffering with the battery performance?
I easily got a day on KK roms, and I have tried all the LL roms and they seem to do the same - about half the capacity I had before, get down to ~ 15%, then a few minutes later battery dead.
Can't get past the afternoon with normal use.
Great Build @superdragonpt, really fast and smooth! I only see that some heavy games as Asphalt 8 and Modern Combat 5 tends to be a little laggy on this and other LP builds, in KK is way smooth and no problems, hopefully this will be fixed with more builds!
Regarding NFC, so far that wasn't working for me, I can't even use Android Beam. So no missing point since it's removed to be improved, hope we get it working perfectly as KK soon.
And good news is Xposed is working really nice in your Rom =)
genesisalgor said:
Great Build @superdragonpt, really fast and smooth! I only see that some heavy games as Asphalt 8 and Modern Combat 5 tends to be a little laggy on this and other LP builds, in KK is way smooth and no problems, hopefully this will be fixed with more builds!
Regarding NFC, so far that wasn't working for me, I can't even use Android Beam. So no missing point since it's removed to be improved, hope we get it working perfectly as KK soon.
And good news is Xposed is working really nice in your Rom =)
Click to expand...
Click to collapse
Hi thanks for report. I am still on latest KK S3S version and I am quite happy with it but also want to move to Lollipop as soon as possible. I use phone mainly for calls, Internet a GPS navigation. No Bluetooth, no NFC and no 3D games.
Would you suggest to try this version?
Odesláno z mého JY-S3 pomocí Tapatalk
I'm getting a good day and a half on light use, and a full day on heavy use.
So, just flashed this ROM and seems super smooth and super fast, thank you superdragonpt!
Edit: Unfortunetaly, batter drops from 20% to 0% on this version. Back on KK.
I'm using the beta III - will i lose data/settings/apps etc if I flash this over the top?
if someone can post (preferably ascii) output of df and mount, that would be nice
Funny thing about the LP build, Youtube app just started to support 60fps videos, in KK the phone runs 720p60 with charm, pretty sad it apparently don't support 1080p60, but in LL all 60fps videos resolution goes up to 480p pretty bad, don't know exactly why.
Another is that Google Now does not show the option "Ok Google from any screen" what worked perfectly in the KK Rom.
Not reporting bugs at all, since this is a Beta, but just helping to point some issues.
I know it might not solve your problem, but I've exposed and gel settings installed and I've got okgoogle turned on and it works, and I think in gravity box in advance setting there is a setting that's similar, I can't confirm that gravity box works but exposed gel settings does.
How can I make the alarm clock ring in silent mode. At night, I don´t want to here the notifications but I want my alarm clock to ring in the morning.
Settings, sound & notifications, interruptions. In here I've turned all priority interruptions off.... This works for me, alarm still wakes me, and a star comes up in the statusbar that I presume is the notification that its on.