I changed somehow the at&t boot logo. now its like a fuzzy pic. any idea how to change it back?
If it is a really pixelated sceen...Flash the i897 Gingerbread Bootloaders through Odin.
Sounds like u r trying to run a GB Rom/firmware without the GB Bootloaders.
There is a download link for these in the OP of TRusselo's Guide thread that is stickied in the Q & A forum.
Sent from my SGH-I897 using xda premium
Related
I need a link to odin with the stock software for my infuse! Please! I am freaking out here. Need to flash froyo with the recovery 2e!my. Infuse is stuck on the samsung logo and it won'tlet me use recovery.. Error about signature.m. Please help. Att infuse 16 gig sd froyo ucke3 I think..lol I did my captivate like 4 times with no problems
Go into the development thread and find gtg's ultimate unbrick thread. It has everything you need, except a Xanax.
Sent from my Infuse. It is what it isn't.
If you can get it into download mode use odin and gtg's unbrick to get back to stock.
Sent from my GT-I9000 using XDA App
Thanks for the help. I got the rom installed. It worked sort of.my apps reappeared but i couldnt open them. They all forced closed. I was able to restore to factory and now it is working great again. I am going to study more before i mess with the rom again... Jeff
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
To start off I have a samsung galaxy s 4g for t-mobile obviously. I was on the 2.3.7 AOSPSTYLE X rom but being the dumbass I am I flashed RaverX3X's Kj6-Rom-CWM-Offical-GB-2.3.6.
Here is the thread
http://forum.xda-developers.com/showthread.php?t=1351783
Well I flashed it in the cwm recovery and afterwards I rebooted and I ended up with the phone stuck on the galaxy s 4g 'exclusively from T-Mobile' splash screen. I also ended up with the stock recovery because I did not read the description of this 'Rom'. Is there any way I could fix this? Please help.
as always.....odin is your friend....
also you could try to reflash it alot of times that works.... the problem i see is no one reads any more and so the forums keep gettin cluttered up with help me i dont feel like searching....tell me what to do.
Sent from my SGH-T959V,SGH-T959 using xda premium.
Odin?
I have heard of this odin but what is it? I've never used it in my life and I don't know how to even flash it. Can you give me details? Thanks!
Go to the second link in my signature and follow the guide and you will be good to go.
Hey everybody, so I might be posting in the wrong section but since its a question I figured I'd post in the Q&A. So my question is since I still have froyo BL and on CM9 can I still flash another rom even though my recovery has the rainbow effect? In recovery the top 1/3 is rainbow but the rest I can read good. I want to flash revolution rom. And I would Odin or heimdall back to stock and go from there but I have no PC. So yeah would it be safe to wipe all and flash revolution even though I'm on a froyo BL, blue CWM and on CM9?
Sent from my SGH-I997 using XDA
Nobody can give me an answer?!?!
Sent from my SGH-I997 using XDA
popi09 said:
Nobody can give me an answer?!?!
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Yeah, you have had to wait a really long time for an answer. I figured folks were just waiting for you to check out the other threads with the exact same question.
Just messing with you, and you'd really be fine to flash the rom that you want to flash. Your best bet would be to get set up right, though. To get rid of the rainbows, it's not too hard to get Gingerbread bootloaders. Follow the instructions in this post to a "t", including the part in the FAQ about how to get red CWM, and you'll have everything you need for a rainbow free rom flashing experience. It will get you set up on stock Gingerbread with custom recovery. Then you can flash any of the other available roms.:
http://forum.xda-developers.com/showthread.php?t=1613523
popi09 said:
Nobody can give me an answer?!?!
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Huh thought process like that will get up you no support....
Ultimately what I am trying to accomplish is to install SlimBean ICS on my friends Froyo Galaxy. (I am a Motorola Guy)
From my understanding you need to go to Ginger first. Easy enough, use Kies.
Next I need to install CM, this is where I am getting lost. Do I need to install 7 (GB) before I can install 9 (ICS)?
How do I install CM on this device? Totally lost because there are so many extra steps.
Lastly there is install SlimBean once CM is installed which is easy enough via CWM.
First question is, are you using a Galaxy or Galaxy S 4G? They're different.
Second, skip KIES, use a one-click. Flash once, reboot, Linda, Flash with bootloaders.
Then you can move on to the fun of ICS.
Please remove the battery from the phone and verify that the model for the phone is either
SGH-T959V
or
SGH-T959W
Those are the only phones the files on this forum are meant for! Reply with the model here so we can direct you to the right forum if your friend's phone is different than the Galaxy S 4G
Theraze said:
First question is, are you using a Galaxy or Galaxy S 4G? They're different.
Second, skip KIES, use a one-click. Flash once, reboot, Linda, Flash with bootloaders.
Then you can move on to the fun of ICS.
Click to expand...
Click to collapse
Galaxy S 4G
FBis251 said:
Please remove the battery from the phone and verify that the model for the phone is either
SGH-T959V
or
SGH-T959W
Those are the only phones the files on this forum are meant for! Reply with the model here so we can direct you to the right forum if your friend's phone is different than the Galaxy S 4G
Click to expand...
Click to collapse
100% SGH-T959V.
http://forum.xda-developers.com/showthread.php?t=1470716
[GUIDES] Fresh out of box Galaxy S 4G | Heimdall One-Click For Dummies
This should get you on GB and rooted with a custom recovery. I believe at this point you can just flash slim bean ICS.
Always make sure you have another ROM you can flash to if the one you want doesn't work. Also make sure you have a backup
Sent from my SGH-T959V using xda premium
That's the one I was using but it didn't explain going beyond gb custom
Sent from my XT875 using xda app-developers app
After using the One Click Heimdall just get to recovery. If you have cwm 5 then you're good to go, just flash the ROM. Search our wiki on how to get to recovery.
sent from me
Thanks everyone for all the help and clarification. His phone is making me really appreciate how easy flashing a ROM on my phone is even with a locked bootloader.
Sent from my XT875 using xda app-developers app
So I tried flashing PA 3.1 from GB 2.3.6 and now it is stuck in bootloader....ik I should have had an ICS kernel I just need help get it put of boot loader. I have tried flashing back one of the official releases using the Motorola tool but I keep getting an error. Thankfully the atrix 2 isn't my primary phone. An help would be much appreciated
Sent from my PantechP9070 using xda premium
cfmusicman said:
So I tried flashing PA 3.1 from GB 2.3.6 and now it is stuck in bootloader....ik I should have had an ICS kernel I just need help get it put of boot loader. I have tried flashing back one of the official releases using the Motorola tool but I keep getting an error. Thankfully the atrix 2 isn't my primary phone. An help would be much appreciated
Sent from my PantechP9070 using xda premium
Click to expand...
Click to collapse
If you have an AT&T branded phone, you'll need to flash the FXZ in this thread:
http://forum.xda-developers.com/showthread.php?t=1961310
For any other Atrix 2, you'll need to look here:
http://forum.xda-developers.com/showthread.php?t=1934874
If you don't know how to flash an FXZ, read this:
http://forum.xda-developers.com/showthread.php?t=1909319
As well as JRW 28's beginner's guide linked in the op of that ^ thread.
It is extremely important that you have the correct FXZ for your phone's model. Also thoroughly read up on what you are attempting to do to your phone to avoid (as much as possible) these types of issues.
Brought to you by time and relative dimensions in space.
Thanks a ton...let the flashing begin
Sent from my PantechP9070 using xda premium