Device info: Samsung galaxy s plus (I9001)
I tried to install the custom ROM DOOMNEXUS V2 20121012, before i did this i rooted my device (checked it with the rootchecker to make sure it had worked), installed CWM v5.5.0.4, wiped the cache and data/factory reset.
After i rebooted my device after i had done the above, my device would straight into recovery mode.
I tried installing the custom rom with team power 2.2.1 recovery but with the same result. Each time the device booted straight into recovery mode and i had to use odin to reinstall my stock firmware.
I also tried using other custom roms for jelly beans like cm 10 alpha, but also with the smae result as stated above.
I have no idea what i did wrong or how i can fix it, so that it boots into jelly beans
Do any of you guys know how to fix it?
Plz help
I'm also having the same issue with same device.. Please help us get out of this...
I have had same problem with... was it CM9 alpha2? Anyway, then there was a flashable zip and that fixed the problem
I have always also formatted dalvic cache.
Anyway, new Doomnexus is out: http://forum.xda-developers.com/showthread.php?t=1936749
Mine DoomNexus V3 works awesome well, i have the kernel 3.0-version. I am using CWM 6.0.1.4 recovery http://forum.xda-developers.com/showthread.php?t=1843825
You had a bootloop.
Read here: http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001 under point 3.5.
Related
Well yesterday i have rooted my nexus s and i have the kernel Air_Kernel_Stable_r1_JBN_BlueColor on jelly Bean 4.1.2 (OTA).Today i tried to put a rom but after downloading a rom my nexus can not start.It goes only in fastboot MODE.If i try ti start it,it stands a black screen after loading the GOOGLE (symbol).Sorry for my english.Can anyone help me?
well... you need to try someother rom.. again. something not working right,
like yesterday I tried to put Baked_blackbean-5 on my crespo (9020a) and it didnt work
then I tried Slim 2.7 but I think I like CM10 nightly more.
Can you send me a rom to put on my nexus? i have not CWM..!
for ROM you asked download CM10 from this ... Download: cm-10-20121020-NIGHTLY-crespo.zip
md5sum: 9bbbfdf49af6624fdc3ee983ca58e1e0 http://get.cm/get/4mC
To put CM10 you need CMW Recovery. you cannot do it with stock recovery.
so ... put your phone into fastboot, and using the guide put ClockworkMod Recovery image
If you dont have CWM then what you have? Stock Recovery? or anyother?
How were you flashing that ROM yesterday?
Regards
Hi,
On my TF300T I flashed the CWM 5.5.0.4 using fastboot and installed CM 9.1 with the CWM - boots & works fine
I want to install CM10 or 10.1 (using the steps I found in the CM Wiki) but the TF300T always stops on "The Device is unlocked".
Now I found a new CWM (6.0.2.3, recovery-jb.img) for using with JB here at xda-developers - finally to install CM10 or 10.1.
But after flashing the recovery-jb.img with fastboot I want to boot into recovery mode, but the TF300T stops on "booting recovery kernel image".
A boot into the previous installed CM9.1 is still possible.
How can I upgrade to CM10 or CM10.1?
Thank you for any help!
cyaneo said:
Hi,
On my TF300T I flashed the CWM 5.5.0.4 using fastboot and installed CM 9.1 with the CWM - boots & works fine
I want to install CM10 or 10.1 (using the steps I found in the CM Wiki) but the TF300T always stops on "The Device is unlocked".
Now I found a new CWM (6.0.2.3, recovery-jb.img) for using with JB here at xda-developers - finally to install CM10 or 10.1.
But after flashing the recovery-jb.img with fastboot I want to boot into recovery mode, but the TF300T stops on "booting recovery kernel image".
A boot into the previous installed CM9.1 is still possible.
How can I upgrade to CM10 or CM10.1?
Thank you for any help!
Click to expand...
Click to collapse
What is your bootloader version? Si it fresh enough?
Bootloader...(!)
I was using ww_epad-9.4.3.30-20120604 - so I upgraded to stock ww_epad-user-10.4.2.20 (using CWM 5.5.0.4), after this I flas the recovery-jb.img (6.0.2.3) - now I can boot into CWM 6.0.2.3 recovery and install CM10. :laugh:
Thank you!
cyaneo said:
Bootloader...(!)
I was using ww_epad-9.4.3.30-20120604 - so I upgraded to stock ww_epad-user-10.4.2.20 (using CWM 5.5.0.4), after this I flas the recovery-jb.img (6.0.2.3) - now I can boot into CWM 6.0.2.3 recovery and install CM10. :laugh:
Thank you!
Click to expand...
Click to collapse
Yeap,.. Bloody bootloader
No problem
Sorry for reopening but - I's crazy!
Heres what I've tried (using Bootloader 1.00e (ww_epad-10.4.2.20-20121226 A03):
First flashing cm 6.0.2.3 and install cm10 and also tried the cm10.1 nightly. Installation works without errors, but on reboot the tf300 freeze on "the device is unlocked"
So I try it with twrp (2.4 jb). The installation of cm10 and also cm10.1 failed with the error "assert failed: getprop"
I also cannot mount /data, no matter what I try.
I've wiped data, cache and dalvik cache every time before I try to install one of the ROMs.
At this time I can do nothing with my TF300, only boot to cwm or twrp!
What the heck is wrong?
cyaneo said:
Sorry for reopening but - I's crazy!
Heres what I've tried (using Bootloader 1.00e (ww_epad-10.4.2.20-20121226 A03):
First flashing cm 6.0.2.3 and install cm10 and also tried the cm10.1 nightly. Installation works without errors, but on reboot the tf300 freeze on "the device is unlocked"
So I try it with twrp (2.4 jb). The installation of cm10 and also cm10.1 failed with the error "assert failed: getprop"
I also cannot mount /data, no matter what I try.
I've wiped data, cache and dalvik cache every time before I try to install one of the ROMs.
At this time I can do nothing with my TF300, only boot to cwm or twrp!
What the heck is wrong?
Click to expand...
Click to collapse
But U probably haven't format /system, right? It's another mandatory thing to do when switching roms.
If it fails, using fastboot try to flash system with original blob file (get it from archive of latest official release) - it will fix /data problem - been there, done that
U can also try to install official rom from zip... IF it fails, try fastboot method.
Let system boot, reboot into recovery again and do full wipe with /system format and install newest cm10.1
szulco said:
But U probably haven't format /system, right? It's another mandatory thing to do when switching roms.
If it fails, using fastboot try to flash system with original blob file (get it from archive of latest official release) - it will fix /data problem - been there, done that
U can also try to install official rom from zip... IF it fails, try fastboot method.
Let system boot, reboot into recovery again and do full wipe with /system format and install newest cm10.1
Click to expand...
Click to collapse
- now I formatted data and system and also wiped all possible parts
- flashing cwm 6.0.2.3 and installing asus stock ROM (ww_epad-user-10.4.2.20), reboot
- cannot access cwm recovery, so I reeflash it with fastboot method
- access cwm recovery and install latest 10.1 nightly, reboot, done.
Thank you so much!
I'm having the same issue.
I bought my TF300T when if first came out. I finally decided to play around with it.
I unlocked it with the Google Play app.
Used fastboot to push the latest ASUS JB4.2 firmware (US_V10.6.1.8)
My bootloader says: (1.00 e) released by "US_epad-10.6.1.8-20130225" A03
I rooted and installed TWRP v2.4.4.0
Everything is working fine for me and I have taken a solid backup, so I'm able to restore back to that when things fail.
I loved using CM7 on my phone, so I wanted to try CM10 on my tablet.
I have tried installing the stable CM 10.0, and I've tried all of the CM 10.1 Nightlies.
Every single time, the install goes perfectly fine, but when I reboot I just get the plain white Asus screen and then it freezes.
I have tried installing with and without installing the gapps.
Every time I install I do a Factory Reset, wipe the Cache, Dalvik Cache, and System. The only thing I didn't do is wipe Data as I'd prefer not to lose my files. (is that the problem, is the data-wipe required?)
Is there something obvious that I'm missing or a step I left out?
Any help would be greatly appreciated.
I tried doing it again with wiping all my data too...that didn't make a difference either. Still freezes on the white asus screen.
Hi, I just registered to reply, as seems noone did. And Ive been there myself, also with the 10.6.1.8 bootloader. Thats the issue. Cyanogenmod isnt compatible yet with the newest bootloader 10.6.1.8.
I hope it will in the future, Im awaiting it too. Until then I just rooted the stock rom, and using it that way. You could try the CROMI-X rom, but its also stock based, I havent tried it yet, maybe ill give the newest update a try (4.3) which will be available in a couple of days, as I really love their newest boot animation(wich I believe isnt included in the 4.2 version)
Till then, no Cyanogenmod for us with the newest bootloader.....also downgrading is not worth the risk if you ask me,,, even if its possible. So Ill wait for the Cyanogenmod team to update their version to ours.
Advice: dont mess with the bootloader nor the recovery img files. Always read carefully if you wanna change recovery if its compatible with your bootloader. If its not, and you flash it...tada....youre the owner of a cool and expensive brick. Dont wipe data in the bootloader, cuz as I understood reading posts here at xda, it will wipe your entire device, including bootloader...then your kinda screwed. So stick to what you have and let the devs do their work to update their roms for the 10.6.1.8 bootloader...MOST importantly, DONT store your device with the keyboard dock closed...(like a laptop)...your screen will crack eventually.I gathered this info on youtube as well as here, and Ive a friend, who was using the device with the dock till last month like that, had it from last august...result, screen cracked 3 weeks ago...its a design flaw in the transformers, the screen is under heavy pressure while in the keydock..I just got my dock last week,, Im storing it separately, and I never close it, only use it for typing, battery and usb.
im writing all this as I think I wont find this post again to reply if you read it.
hi folks,
Need information on how to load CM 10.1 Android 4.2.2 on my Samsung Galaxy S Plus.
Currently i have the CM 10 Beta 4 (JB 4.1.2) installed. Current recovery is Recovery-clockwork-5.5.0.4-ariesve.
I've downloaded these files.
cm-10.1-20130622-dev_connection_team-release2-ariesve.zip
DevCon-gapps-jb-20130622-signed.zip
cwm6032-Build2-ariesve-alireza7991.zip
Kernel_JB-4.2.2_3.4_20130622_Google-4.6_Stock_Signed.zip
When i checked the AriesDevCon team's link and XDA Wiki Samsung SGS+ link there was some confusion.
The Wiki link doesn't say anything about the recovery installation. Should i use Odin to install the CWM6032 or just put it in the SD card and reboot into recovery? I'd used Odin for the 5.5.0.4 recovery.
From the XDA forums on recovery (alireza7991's) saw that i could use Odin to install the recovery first.
Also, what do i do with the 3.4 kernel ? Should i load that too in the SD card before recovery mode for the installation?
My current kernel is 3.0.70.
Could someone with the proper knowledge please guide ? And please provide the exact steps and the files needed.
I've done the CM 10.1 already and it worked pretty well, but was not able to do any upgrade later (to release 2.5 etc). Had my phone soft-bricked two times and had to install the stock Gingerbread ROM to come back to JB 4.1.2 ROM.
regards,
Anoop
The files you got are .ZIP files.
It should be possible to flash these using the recovery. I have To check back for further instructions cause i'm not familiar with the s+ but cwm should be installed automatically when the kernel has be installed.
Sent from my GT-I9100 using xda app-developers app
Did it work?
Sent from my GT-I9100 using xda app-developers app
Hey dude...u must wipe data,dalvik....maybe it can help u...
Sent from my HTC ChaCha A810e using xda app-developers app
lil.masoud said:
Hey dude...u must wipe data,dalvik....maybe it can help u...
Sent from my HTC ChaCha A810e using xda app-developers app
Click to expand...
Click to collapse
You have to wipe data and cache, wiping dalvik cache is useless.
anoopgkris said:
hi folks,
Need information on how to load CM 10.1 Android 4.2.2 on my Samsung Galaxy S Plus.
Currently i have the CM 10 Beta 4 (JB 4.1.2) installed. Current recovery is Recovery-clockwork-5.5.0.4-ariesve.
I've downloaded these files.
cm-10.1-20130622-dev_connection_team-release2-ariesve.zip
DevCon-gapps-jb-20130622-signed.zip
cwm6032-Build2-ariesve-alireza7991.zip
Kernel_JB-4.2.2_3.4_20130622_Google-4.6_Stock_Signed.zip
When i checked the AriesDevCon team's link and XDA Wiki Samsung SGS+ link there was some confusion.
The Wiki link doesn't say anything about the recovery installation. Should i use Odin to install the CWM6032 or just put it in the SD card and reboot into recovery? I'd used Odin for the 5.5.0.4 recovery.
From the XDA forums on recovery (alireza7991's) saw that i could use Odin to install the recovery first.
Also, what do i do with the 3.4 kernel ? Should i load that too in the SD card before recovery mode for the installation?
My current kernel is 3.0.70.
Could someone with the proper knowledge please guide ? And please provide the exact steps and the files needed.
I've done the CM 10.1 already and it worked pretty well, but was not able to do any upgrade later (to release 2.5 etc). Had my phone soft-bricked two times and had to install the stock Gingerbread ROM to come back to JB 4.1.2 ROM.
regards,
Anoop
Click to expand...
Click to collapse
It is not necessary to install recovery before every ROM installation. CWM 5.5.0.4 is a stable and safe recovery for our device.
According to the kernel i recommend you to use K^Kernal 3.4.x. It is more battery friendly with good performance.
The procedure is as explained in there
1. Boot in to recovery and
2. flash CWM 6.0.3.2 (if you want to, otherwise skip this) and reboot in to recovery.
3.Wipe data(not necessary when you are coming from a previous build of the same ROM, but recommended), wipe cache, and wipe dalvic cache
4. Flash ROM, Flash Gapps and flash kernel and reboot,
You are done.!
[SOLVED] How to install CyanogenMod 10.1 on my Samsung Galaxy S Plus
Hey folks,
Thanks to all of you for the kind advises!
In fact, i checked for any reply one hour after posting my question and only H3llwar's one reply was visible.
Was too impatient and thought to go ahead with the Modding.
First tried to flash the latest recovery cwm-emmcbrickedpatch-ariesve-6.0.3.2-alireza7991.img using Odin.
This one stuck at one stage (<1> recovery.img download) and didn't move further. So disconnected the USB and removed the battery (I forgot though in what sequence). I expected this to happen since it had happened two times before when trying to flash a non-tar recovery. Also I expected my phone to be soft-bricked, but luckily it did'nt. :good:
Then went through some more info on XDA and other forums and found a WORKED.rar solution.
from http://forum.xda-developers.com/showpost.php?p=30015714&postcount=22
Used that AriesVE.ops version and the recovery-clockwork-6.0.1.0-ariesve.tar.md5 and was able to flash the new recovery.
The reason i flashed the new recovery is that because i always used to find on these forums to use a specific recovery for a specific ROM.
Anyway, then i loaded the CM 10.1 and Gapps into the SD card, set debugging mode on and restarted in Recovery mode.
Then backed up data (Nandroid). Then wiped data/factory reset and wiped cache partition.
Then asked recovery to install from zip card selecting the CM10.1 ROM followed by Gapps. These processes happened very fast this time.
Then rebooted and there it was, a new magenta Cyanogen footer logo along with with the Samsung logo.
Skipped the initial parts and went to the About Phone section with the Android 4.2.2 indication.
Was very happy to also see my Kernel updated to 3.4.49. Three days now on the new ROM and loving it, battery life improved by at least 5% (from the 4.1.2). But missing the 4.1.2 fonts for the clock etc. Although the other internal fonts are smoother and easier on the eye.
Pasting the info screenshot here.
anoopgkris said:
Hey folks,
Thanks to all of you for the kind advises!
In fact, i checked for any reply one hour after posting my question and only H3llwar's one reply was visible.
Was too impatient and thought to go ahead with the Modding.
First tried to flash the latest recovery cwm-emmcbrickedpatch-ariesve-6.0.3.2-alireza7991.img using Odin.
This one stuck at one stage (<1> recovery.img download) and didn't move further. So disconnected the USB and removed the battery (I forgot though in what sequence). I expected this to happen since it had happened two times before when trying to flash a non-tar recovery. Also I expected my phone to be soft-bricked, but luckily it did'nt. :good:
Then went through some more info on XDA and other forums and found a WORKED.rar solution.
from http://forum.xda-developers.com/showpost.php?p=30015714&postcount=22
Used that AriesVE.ops version and the recovery-clockwork-6.0.1.0-ariesve.tar.md5 and was able to flash the new recovery.
The reason i flashed the new recovery is that because i always used to find on these forums to use a specific recovery for a specific ROM.
Anyway, then i loaded the CM 10.1 and Gapps into the SD card, set debugging mode on and restarted in Recovery mode.
Then backed up data (Nandroid). Then wiped data/factory reset and wiped cache partition.
Then asked recovery to install from zip card selecting the CM10.1 ROM followed by Gapps. These processes happened very fast this time.
Then rebooted and there it was, a new magenta Cyanogen footer logo along with with the Samsung logo.
Skipped the initial parts and went to the About Phone section with the Android 4.2.2 indication.
Was very happy to also see my Kernel updated to 3.4.49. Three days now on the new ROM and loving it, battery life improved by at least 5% (from the 4.1.2). But missing the 4.1.2 fonts for the clock etc. Although the other internal fonts are smoother and easier on the eye.
Pasting the info screenshot here.
Click to expand...
Click to collapse
You tried to flash .IMG recovery file via Odin. That won't work.! You need a .tar or .tar.md5 file to flash via odin.
Sent from my GT-I9001 using xda premium
Good battery life - CM 10.1
Hey Jabrief, thanks for the advise, I'll note it.
Until now, CM10.1 - 4.2.2 is running very smooth on my SGS+. Getting a very good battery life too. GPS is somewhat slow but maybe it's because odd the cloudy weather all the month.
Attaching a battery stats pic.
Got 32 hours and 40 mins on single charge.
About 16 mins of call, 45 mins of browsing in all.
thanks,
Anoop
Hi guys I ve been a htc desire hd user and I have been installing roms on it . Now I got my galaxy tab 2 10.1 on jellybean 4.1.1. It was brand new and I rooted it by flashing some zip through odin and installed philz recovery ( didnt do anything with bootloader since I followed a guide). I then started to download and install roms. Cyanogemod jellybean rom installed fine on it but other then that rom I tried putting infected, cyanogen mod android 4.3 rom and two other roms. I made sure I did data wipe, cacha wipe e.t.c, downloaded right roms and other things. Still these roms dont load. When I start my device its just stuck on samsung tab 2 10.1 logo forever, except for the cyanogemmod jellybean rom. I dont think theres a problem with recovery since it install the rom fine and other thn that it developed by cwm.From my experience I think there must be a problem in flashing/loading of boot image but I am still not sure. Remember I didnt do anythimg with bootloader, dont know whether it locked or unlocked but why arent other roms installing on my tab except cyanogenmod 4.1 rom. Even ics roms dont install. while I have seen people comments that they get to install roms successfully and have exactly my model of tab.
My model is gt p5113 and running stock 4.1.1 for now. Any help will be appreciated.
Thanks in advance.
Only things i can think of are that you change recovery or just try to download all stuff for roms again and again. Maybe there is something broken in your device.
T3ER said:
Only things i can think of are that you change recovery or just try to download all stuff for roms again and again. Maybe there is something broken in your device.
Click to expand...
Click to collapse
Yes I redownloaded roms again. Do you think that it has something to do with bootloader. I ll try changing recovery though
assasin196 said:
Hi guys I ve been a htc desire hd user and I have been installing roms on it . Now I got my galaxy tab 2 10.1 on jellybean 4.1.1. It was brand new and I rooted it by flashing some zip through odin and installed philz recovery ( didnt do anything with bootloader since I followed a guide). I then started to download and install roms. Cyanogemod jellybean rom installed fine on it but other then that rom I tried putting infected, cyanogen mod android 4.3 rom and two other roms. I made sure I did data wipe, cacha wipe e.t.c, downloaded right roms and other things. Still these roms dont load. When I start my device its just stuck on samsung tab 2 10.1 logo forever, except for the cyanogemmod jellybean rom. I dont think theres a problem with recovery since it install the rom fine and other thn that it developed by cwm.From my experience I think there must be a problem in flashing/loading of boot image but I am still not sure. Remember I didnt do anythimg with bootloader, dont know whether it locked or unlocked but why arent other roms installing on my tab except cyanogenmod 4.1 rom. Even ics roms dont install. while I have seen people comments that they get to install roms successfully and have exactly my model of tab.
My model is gt p5113 and running stock 4.1.1 for now. Any help will be appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Try to Install ClockworkMod Recovery from below thread. Then do a factory reset, do a data, cache and dalvik cahe wipe and install new Rom.
http://forum.xda-developers.com/showthread.php?t=2268785
I hope you did not repartitioned or something. Did you happened to setup dual boot?
mchauhan said:
Try to Install ClockworkMod Recovery from below thread. Then do a factory reset, do a data, cache and dalvik cahe wipe and install new Rom.
http://forum.xda-developers.com/showthread.php?t=2268785
I hope you did not repartitioned or something. Did you happened to setup dual boot?
Click to expand...
Click to collapse
No i didnt do anything like that. ( but after installing cyanogemod 4.1 my music and gallery was saved, i hope this is natural)
assasin196 said:
No i didnt do anything like that. ( but after installing cyanogemod 4.1 my music and gallery was saved, i hope this is natural)
Click to expand...
Click to collapse
Yes, Normally Installing new ROM does not wipe your music and gallery if they are stored on your external SD card.
assasin196 said:
Yes I redownloaded roms again. Do you think that it has something to do with bootloader. I ll try changing recovery though
Click to expand...
Click to collapse
I agree that you might need to change your recovery. I use TWRP.
http://forum.xda-developers.com/showthread.php?p=41160028
Sent from my GT-p511x
---------- Post added at 08:59 AM ---------- Previous post was at 08:56 AM ----------
mchauhan said:
Yes, Normally Installing new ROM does not wipe your music and gallery if they are stored on your external SD card.
Click to expand...
Click to collapse
Nor does it wipe the internal sdcard.
Sent from my GT-p511x
today i tried to install the custom rom 'liquid smooth' but my phone got stuck on an old recovery mode. i tried everything a couldn't go back, so i just flashed the stock rom again.
the question is, can someone tell what happened? what did i do wrong?
i am root and i had cwm installed so i just dont' get it.
i just need a stable rom for my phone!!!
First flash CM by dhiru and then flash LS over it.
Sent from my GT-I9003