Related
Hello,
I have bricked my tablet Onda Vi10 Deluxe, I have flashed the tablet with a wrong image to ainol, and now, my tablet switch on, but don't work the touch. If I connect to pc, the tablet recognize the usb but I dont touch anything. What can I do ?
Can I switch on with recovery or similar anything to reflash it ?
Thanks very much.
trempi said:
Hello,
I have bricked my tablet Onda Vi10 Deluxe, I have flashed the tablet with a wrong image to ainol, and now, my tablet switch on, but don't work the touch. If I connect to pc, the tablet recognize the usb but I dont touch anything. What can I do ?
Can I switch on with recovery or similar anything to reflash it ?
Thanks very much.
Click to expand...
Click to collapse
I have tried to install a ClockWork Recovery but the pc need the tablet with enabled debbuging usb and I suppose that it's unable and I can't touch anything ....
Please ...... help me please.
trempi said:
I have tried to install a ClockWork Recovery but the pc need the tablet with enabled debbuging usb and I suppose that it's unable and I can't touch anything ....
Please ...... help me please.
Click to expand...
Click to collapse
Hey ..... I don't believe it !!!! I have flashed another time and now it has worked fine. The tablet switches on perfectly and can work with it. I have tried with same program (LiveSuitPack_v1.07.exe), same rom, same pc, all same and now it worked good.
I DON'T BELIEVE IT !!!!
I'm having a similar problem. I installed Busybox and caused the thing where it constantly resets to chinese. I have had no success at all in getting the LiveSuitPack_107 to reflash it. It hangs after 3% copied every single time. I don't think it is actually doing anything since I can still turn it on. You're sure there was nothing special to get the LiveSuit to actually work?
Can I ask, what base OS are you running the LiveSuit from? WinXP? 7? 64 or 32 bit?
trempi said:
Hello,
I have bricked my tablet Onda Vi10 Deluxe, I have flashed the tablet with a wrong image to ainol, and now, my tablet switch on, but don't work the touch. If I connect to pc, the tablet recognize the usb but I dont touch anything. What can I do ?
Can I switch on with recovery or similar anything to reflash it ?
Thanks very much.
Click to expand...
Click to collapse
bricked =bootloader problem not your case but it seems you have a hardware failure maybe you have to replace touchscreen but firstly tell me what image tried to flash
an idea :try to enter recovery mode from buttons then check if touchscreen is responsive
if not touchscreen needs replacement
There are offical rom in their site, you can download the rom,and flash it again.
Hey everyone first this is a great place full of info, I just get and Trio stealth pro 7 by mach speed technology, I rooted it, I intalled CWM without problems, I also flash CM9 without any problem, but I change CPU values, to min=900MHz max=1200MHz something like that and after that a turn off the tablet then when I turn on again it just freeze in lock screen after boot. and I can't go to recovery mode with hardware bottons, Sorry for my english I'm from Venezuela. thanks any help.
Joshdmo said:
Hey everyone first this is a great place full of info, I just get and Trio stealth pro 7 by mach speed technology, I rooted it, I intalled CWM without problems, I also flash CM9 without any problem, but I change CPU values, to min=900MHz max=1200MHz something like that and after that a turn off the tablet then when I turn on again it just freeze in lock screen after boot. and I can't go to recovery mode with hardware bottons, Sorry for my english I'm from Venezuela. thanks any help.
Click to expand...
Click to collapse
You can get into recovery via ADB, Download the USB drivers for your device and then get the Android SDK tools, you can read up how to do that, then get into your platform tools folder, get a cmd prompt going, turn it on, and type "adb reboot recovery" as fast as you can before it freezes.
orangekid said:
You can get into recovery via ADB, Download the USB drivers for your device and then get the Android SDK tools, you can read up how to do that, then get into your platform tools folder, get a cmd prompt going, turn it on, and type "adb reboot recovery" as fast as you can before it freezes.
Click to expand...
Click to collapse
Thanks man, I now downloading the android SDK tools, but i can't find the usb driver, but i think my pc already has it installed because I rooted my tablet from here with unlockroot, anyways I will get it a shout and I let you now if i need some help, thenks for the answer so fast.
Joshdmo said:
Thanks man, I now downloading the android SDK tools, but i can't find the usb driver, but i think my pc already has it installed because I rooted my tablet from here with unlockroot, anyways I will get it a shout and I let you now if i need some help, thenks for the answer so fast.
Click to expand...
Click to collapse
yeah bro, let us know if it worked
Ok bro i did install the sdk and the plataformtools how i open the adb sorry i'm kind of noob in this sdk stuff
Sent from my LG-P500 using xda app-developers app
Ey man thanks for the help, I install recovery from ADB shell but for some reason every time i reboot my tablet the recovery is gone, so i restore stock rom but the touch is nota working and now i can't connect to adb because debugging mode is off in the tablet, any ideas? Please bro and thanks for the help
Sent from my LG-P500 using xda app-developers app
Hello. I have the same problem but where do you get the stock firmware?
Sent from my Xperia Mini Pro using xda app-developers app
Stealth Pro
siuishere said:
Hello. I have the same problem but where do you get the stock firmware?
Sent from my Xperia Mini Pro using xda app-developers app
Click to expand...
Click to collapse
Don't know if you're still having the same problem but if so, you're in luck. I have the same tablet, what I did to restore mine was to download livesuit to flash a recovery image onto your device. Of course everything will be deleted but once you're back into your tablet you can put all your apps back on &/or your custom rom. I was able to get CM10 onto mine running very smoothly so I recommend iit.
Anyway, use the recovery image for the ly-f1 tablet. It's exactly like the stealth pro trio tablet so you can use the same things. Just google "ly-f1 recovery image" download a good one and open it up in livesuit. After that you're gonna wanna put your tablet into download mode.To do that you wanna make sure the tablet is off. Plug your usb in. Press and hold the volume down button on your tablet while pressing the power button about 10 times or at least until you hear your computer respond. Livesuit will guide you there rest of the way. It's really simple.
GOOD LUCK.
YannaMariex said:
Don't know if you're still having the same problem but if so, you're in luck. I have the same tablet, what I did to restore mine was to download livesuit to flash a recovery image onto your device. Of course everything will be deleted but once you're back into your tablet you can put all your apps back on &/or your custom rom. I was able to get CM10 onto mine running very smoothly so I recommend iit.
Anyway, use the recovery image for the ly-f1 tablet. It's exactly like the stealth pro trio tablet so you can use the same things. Just google "ly-f1 recovery image" download a good one and open it up in livesuit. After that you're gonna wanna put your tablet into download mode.To do that you wanna make sure the tablet is off. Plug your usb in. Press and hold the volume down button on your tablet while pressing the power button about 10 times or at least until you hear your computer respond. Livesuit will guide you there rest of the way. It's really simple.
GOOD LUCK.
Click to expand...
Click to collapse
Can you tell me where would I find the Image files. I tried to using the livesuite i keep getting invalid img file with files that i have
trio7-a10-bma250-stockimg
and
trio7-a10-mxc622x-stockimg
Joshdmo said:
Hey everyone first this is a great place full of info, I just get and Trio stealth pro 7 by mach speed technology, I rooted it, I intalled CWM without problems, I also flash CM9 without any problem, but I change CPU values, to min=900MHz max=1200MHz something like that and after that a turn off the tablet then when I turn on again it just freeze in lock screen after boot. and I can't go to recovery mode with hardware bottons, Sorry for my english I'm from Venezuela. thanks any help.
Click to expand...
Click to collapse
Hi, I'm kinda of a noob at this stuff, but I've learned quite a bit recently from just reading around, so bear with me if I don't understand or need more specific instructions. I have the trio stealth pro 7 and it is always stuck on the boot screen with the android logo when I boot. I was attempting to flash cm9 on the tablet but after I wiped the tablet initially, i couldnt find the cm9 rom on my internal memory while in recovery mode, so I ended up turning off my tablet, which now doesn't boot up anymore (stuck with android logo). I found a fix where you can use livesuite and adb to fix this issue; however, after installing adb, my tablet is not being detected, (my phone does). My tablet is not being recognized by windows in general, and it doesn't show up under device manager. There was one part of the step where I need to install usb drivers for the tablet; however, I cant find any online. I have used the tablet before with my computer before the attempt to flash cm9, so I am guessing drivers should already be installed. I feel I can get this issue fixed if I can just get adb to recognize my tablet. Perhaps this fix is not the one I need and maybe there's a simpler fix. I'm just too dumb to have realized it. Another note to add is, pressing the combination of power and volume buttons does nothing. Please help!!! thank you!!
stock images download
Hi guys ... Trio tablet Is similar or the same as Ly-F1 tablets :cyclops: these stock images will work and can be downloaded from link bekow.. make sure you download live suite first, applicable drivers (adb/fastboot) and you should be good . Follow directions accordingly and as reminder ,, :highfive: ,,, flashing / adb / sdk should only be used by advanced users who are comfortable using the SDK ADB flash tools.. . I am in no way responsible for bricked devices... Happy Flashing. :cyclops:
http://lyxfsz.com/en/downs.htm?sortid=0_22 Downloads LINK
hi all. i just installed ubuntu 12.10 as dual boot because i heard it will interact better with android.
problem is, when i plug in my infinity, and go to media/usb, nothing shows up.
anyone know what im doing wrong?
tablet says "connected as a media device" but doesn't show up in ubuntu.
redheadplantguy said:
hi all. i just installed ubuntu 12.10 as dual boot because i heard it will interact better with android.
problem is, when i plug in my infinity, and go to media/usb, nothing shows up.
anyone know what im doing wrong?
tablet says "connected as a media device" but doesn't show up in ubuntu.
Click to expand...
Click to collapse
mtp support in Linux is still bad - but you can try this:
http://forum.xda-developers.com/showthread.php?t=1977953
_that said:
mtp support in Linux is still bad - but you can try this:
http://forum.xda-developers.com/sIhowthread.php?t=1977953
Click to expand...
Click to collapse
I tried something like that last night, and couldn't get it working. Doesn't have to be ftp even. Honestly, the reason I dual booted with Ubuntu was I was hoping to be able to access all partitions. Like ones windows can't see
Afternoon guys,
Before anyone has a go at me, I've have spent about five hours looking through this forum for what I'm looking for and i've tried all the easy unroot/easy flasher/etc and got all the stock Asus rom and recovery. AND the forum search is temporarily unavailable.
So here is what I have:
ClockworkMod Recovery v5.8.3.4
Liquid Smooth Rom
I have installed the stock rom, recovery and wiped everything.
If i press the power button it loads into CWM recovery.
If i press power and down vol, it loads to the wipe data/load android screen, and which it hangs on forever,
So I guess what im asking you good people of the internet is:
A) How do I finally get rid of CWM Recovery (because even if i install another recovery it boots back to CWM), and
B) How on gods earth do I get back to stock?
Now I know people are going to be like search the forums, I have, and I've tried literally everything that everyone has posted, and clearly while it's worked for millions of other people, my tablet is retarded and doesnt want to follow the norm.
Also i am the greatest noob ever.
Any help would be greatly appreciated.
Thanks
Hmmm, did you unzip the stock ROM once before flashing (it will still be a zip).
Otherwise, try using EasyFlasher and APX mode. For EasyFlasher, do not unzip the stock ROM, use it as it downloads from Asus.
killerkuk said:
Afternoon guys,
Before anyone has a go at me, I've have spent about five hours looking through this forum for what I'm looking for and i've tried all the easy unroot/easy flasher/etc and got all the stock Asus rom and recovery. AND the forum search is temporarily unavailable.
So here is what I have:
ClockworkMod Recovery v5.8.3.4
Liquid Smooth Rom
I have installed the stock rom, recovery and wiped everything.
If i press the power button it loads into CWM recovery.
If i press power and down vol, it loads to the wipe data/load android screen, and which it hangs on forever,
So I guess what im asking you good people of the internet is:
A) How do I finally get rid of CWM Recovery (because even if i install another recovery it boots back to CWM), and
B) How on gods earth do I get back to stock?
Now I know people are going to be like search the forums, I have, and I've tried literally everything that everyone has posted, and clearly while it's worked for millions of other people, my tablet is retarded and doesnt want to follow the norm.
Also i am the greatest noob ever.
Any help would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
If your TF is SBK1 (Serial B6O or earlier, some B7Os work too) you can use NVFlash
http://www.xdafileserver.nl/index.php?dir=Asus/Asus+Transformer+(TF101)/STOCK+ROMS/ICS+.27
Stick the TF into APX mode (Vol up & Power from Powered Off state)
Run download.bat as Admin (Right click > Run as Admin)
@frederuco
I did unzip it and install it. It still hangs.
I tried EasyFlasher, but for some reason I run through it and the process completes, when i reboot the tablet nothing has changed.
@*Detection*
I can't get the link to work for some reason.
Thanks for your help so far, but stupid tablet stays stupid!
killerkuk said:
@frederuco
I did unzip it and install it. It still hangs.
I tried EasyFlasher, but for some reason I run through it and the process completes, when i reboot the tablet nothing has changed.
@*Detection*
I can't get the link to work for some reason.
Thanks for your help so far, but stupid tablet stays stupid!
Click to expand...
Click to collapse
Try the direct links here
WW and US in that order
Code:
http://www.xdafileserver.nl/Files/Asus/Asus%20Transformer%20(TF101)/STOCK%20ROMS/ICS%20.27/NVFLASH_ICS_9.2.1.27_WW_NOROOT.7z
http://www.xdafileserver.nl/Files/Asus/Asus%20Transformer%20(TF101)/STOCK%20ROMS/ICS%20.27/NVFLASH_ICS_9.2.1.27_US_NOROOT.7z
Otherwise go to http://www.xdafileserver.nl and navigate to stock ROMs section
*Detection* said:
Try the direct links here
WW and US in that order
Code:
http://www.xdafileserver.nl/Files/Asus/Asus%20Transformer%20(TF101)/STOCK%20ROMS/ICS%20.27/NVFLASH_ICS_9.2.1.27_WW_NOROOT.7z
http://www.xdafileserver.nl/Files/Asus/Asus%20Transformer%20(TF101)/STOCK%20ROMS/ICS%20.27/NVFLASH_ICS_9.2.1.27_US_NOROOT.7z
Otherwise go to http://www.xdafileserver.nl and navigate to stock ROMs section
Click to expand...
Click to collapse
Much appreciated! :good:
Fingers crossed this works!
*Detection* said:
If your TF is SBK1 (Serial B6O or earlier, some B7Os work too) you can use NVFlash
http://www.xdafileserver.nl/index.php?dir=Asus/Asus+Transformer+(TF101)/STOCK+ROMS/ICS+.27
Stick the TF into APX mode (Vol up & Power from Powered Off state)
Run download.bat as Admin (Right click > Run as Admin)
Click to expand...
Click to collapse
I downloaded it and ran it as admin, DOS flashed up and disappeared before i could read what it said.
the nvflash app does the same, even when i run as admin.
maybe this is a lost cause..
killerkuk said:
I downloaded it and ran it as admin, DOS flashed up and disappeared before i could read what it said.
the nvflash app does the same, even when i run as admin.
maybe this is a lost cause..
Click to expand...
Click to collapse
What is the first 3 characters of your tablet serial?
And was it in APX mode connected to PC USB with APX drivers installed ?
*Detection* said:
What is the first 3 characters of your tablet serial?
And was it in APX mode connected to PC USB with APX drivers installed ?
Click to expand...
Click to collapse
The serial starts with B40.
Im on a mac (as i have no access to a pc) but have VMWARE running windows 7, with APX drivers on it.
When i put it in APX mode, it comes up that it is connected as Nvidia APX device.
Could this be where I'm going wrong?
killerkuk said:
The serial starts with B40.
Im on a mac (as i have no access to a pc) but have VMWARE running windows 7, with APX drivers on it.
When i put it in APX mode, it comes up that it is connected as Nvidia APX device.
Could this be where I'm going wrong?
Click to expand...
Click to collapse
Yea probably, I've never tried using NVFlash on anything other than a PC running Windows
Try updating the NVidia APX Device with these drivers
http://forum.xda-developers.com/attachment.php?attachmentid=1489867&d=1353190140
Chances are its the drivers running on the Mac that are causing the problem with the USB > VMWare > TF101
I know nothing about Mac, but I heard you can install Windows 7 almost natively using Bootcamp or something? Might be worth trying that if you can't do it in VMWare
*Detection* said:
Yea probably, I've never tried using NVFlash on anything other than a PC running Windows
Try updating the NVidia APX Device with these drivers
http://forum.xda-developers.com/attachment.php?attachmentid=1489867&d=1353190140
Chances are its the drivers running on the Mac that are causing the problem with the USB > VMWare > TF101
I know nothing about Mac, but I heard you can install Windows 7 almost natively using Bootcamp or something? Might be worth trying that if you can't do it in VMWare
Click to expand...
Click to collapse
thanks dude, looks like i need a trip to a friends house!
killerkuk said:
thanks dude, looks like i need a trip to a friends house!
Click to expand...
Click to collapse
Good luck!
*Detection* said:
Good luck!
Click to expand...
Click to collapse
Thanks for your help!
All sorted and back to stock. looks like it was an issue with the mac. plugged it into a pc and everything worked out fine!
WOOOOOOOOOOOOOOOOOOOOOOOOO!!!
killerkuk said:
Thanks for your help!
All sorted and back to stock. looks like it was an issue with the mac. plugged it into a pc and everything worked out fine!
WOOOOOOOOOOOOOOOOOOOOOOOOO!!!
Click to expand...
Click to collapse
Great!
At least you know now you can do what you like with it firmware / ROM / Recovery wise, and always be able to return it to stock, you can't break APX mode unless you physically damage the tablet
hello, i think this forum is my last hope, i have a tablet and i've been searched the correct rom for it, but is not very commun in the market (DOPO), and i am a very noob in this kind of topics, i tried the recovery mode but now shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the no1, it stays there for hours without anything happening, i guess, i only have the choice to flash the tablet with a rom, but i will apreciate if you guys help me how to find the right way to reinstall my android OS,or find the right OS for my tablet. please, help me
My Tablet:
DOPO Double Power
Model: GS-918
9" multitouch display
8GB Memory
Android 4.1.1 Jelly Bean operating system
1.5GHz Amlogic Cortex A9 dual-core processor
1GB system memory
800 x 480 resolution
sdesignz said:
hello, i think this forum is my last hope, i have a tablet and i've been searched the correct rom for it, but is not very commun in the market (DOPO), and i am a very noob in this kind of topics, i tried the recovery mode but now shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the no1, it stays there for hours without anything happening, i guess, i only have the choice to flash the tablet with a rom, but i will apreciate if you guys help me how to find the right way to reinstall my android OS,or find the right OS for my tablet. please, help me
My Tablet:
DOPO Double Power
Model: GS-918
9" multitouch display
8GB Memory
Android 4.1.1 Jelly Bean operating system
1.5GHz Amlogic Cortex A9 dual-core processor
1GB system memory
800 x 480 resolution
Click to expand...
Click to collapse
Download This File
https://docs.google.com/file/d/0B8YnQA1FX-_yUU1ERXh1TjNUbnc/edit?usp=sharing
Click to expand...
Click to collapse
Install Cwm On your tab with mtk droid tools (search for it on the internet)
Boot into recovery mode....
The file you downloaded must be in your sd card....
Select apply update from sd card...
Choose the zip file....
Click yes....
The phone will boot normally....
do everything at your own risk... don't forget to make a backup of your tab with mtkdroid tools..... I am not responsible for any harm caused to your device
Click to expand...
Click to collapse
N'ayam Amarsh'e said:
Download This File
Install Cwm On your tab with mtk droid tools (search for it on the internet)
Boot into recovery mode....
The file you downloaded must be in your sd card....
Select apply update from sd card...
Choose the zip file....
Click yes....
The phone will boot normally....
Click to expand...
Click to collapse
wow thank you for the quick reply!
i am trying to do the back up to my rom but the MTKdroidTools does not recognize my device when i plug in with the usb cable to the pc
EDIT: ok i run the the .zip file named dopo7088stk and this is what it says:
install/sdcard...
finding update package...
opening update package...
verifying update package...
installation aborted.
sdesignz said:
wow thank you for the quick reply!
i am trying to do the back up to my rom but the MTKdroidTools does not recognize my device when i plug in with the usb cable to the pc
Click to expand...
Click to collapse
Mtkdroid tools only works with mediatek devices (with a mediatek chip eg mt6577, mt6589 etc) so will not work with your device
What actually is wrong with your tablet?
sdesignz said:
wow thank you for the quick reply!
i am trying to do the back up to my rom but the MTKdroidTools does not recognize my device when i plug in with the usb cable to the pc
EDIT: ok i run the the .zip file named dopo7088stk and this is what it says:
install/sdcard...
finding update package...
opening update package...
verifying update package...
installation aborted.
Click to expand...
Click to collapse
Sorry Then i can't help... But you can try to do factory reset from CWM REcovery... If this helps then you can boot normally.. If this too doesn't works then you will have to give it to SVC.....
Sorry Then i can't help... But you can try to do factory reset from CWM REcovery... If this helps then you can boot normally.. If this too doesn't works then you will have to give it to SVC.....
Click to expand...
Click to collapse
but to do a cwm recovery i need the tablet drivers isn't it?
and i don't have them :/
oscarblue48 said:
Mtkdroid tools only works with mediatek devices (with a mediatek chip eg mt6577, mt6589 etc) so will not work with your device
What actually is wrong with your tablet?
Click to expand...
Click to collapse
it freezes in the operating system start logo, or shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the 1, it stays there for hours without anything happening. I already tried using the system recovery but it did not work, i tried with diferent roms but nothing :/, i don't have the warranty paper, i guess i'm ****ed :C
sdesignz said:
but to do a cwm recovery i need the tablet drivers isn't it?
and i don't have them :/
it freezes in the operating system start logo, or shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the 1, it stays there for hours without anything happening. I already tried using the system recovery but it did not work, i tried with diferent roms but nothing :/, i don't have the warranty paper, i guess i'm ****ed :C
Click to expand...
Click to collapse
Can you get into the recovery menu and do factory reset or anything else??
I guess you've tried resetting via the reset button?
There doesn't appear to be a stock rom available for the GS-918 on the Dopo website, have you contacted them to see if they are able to help?
You could try leaving the tablet on when it freezes until the battery runs right down and it turns off, then put it on charge and try it again, not much else I can think of at the moment
oscarblue48 said:
Can you get into the recovery menu and do factory reset or anything else??
I guess you've tried resetting via the reset button?
There doesn't appear to be a stock rom available for the GS-918 on the Dopo website, have you contacted them to see if they are able to help?
You could try leaving the tablet on when it freezes until the battery runs right down and it turns off, then put it on charge and try it again, not much else I can think of at the moment
Click to expand...
Click to collapse
yes i can do everything but it doesn't fix anything :C
and yes, i've tried the ressetting via reset button.
i can swear you there is no dopo GS-918 model drivers or rom in the whole web u.u
I contacted them but they only told me about the recovery menu, and i send them a question but they haven't answered me yet.
((((
now the pc recognizes the tablet via usb, well, it recognized first like vid_1f3a_pid_efe8_driver, then it disappeared and recognized a M3-CHIP driver but with errors (The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver, blabla.)
so i think i need to find the M3-CHIP driver isn't?
EDIT:
I let the battery ran out, and now shows me the box that says: Android is upgrading, Optimizing app 1,2,3,4,5,6,7 of 39, but never pass the 7 now, then i restart the tablet againt, and say: optimizing app 20 of 23, but it freezes,then i restart the tablet... againt, and say: optimizing app 1 of 7, i restart again the tablet, and then it freezes in the first logo forever, the end :C
So, i think one of those last applications is creating the conflict
EDIT 2:
so, now im stuck in the system recovery, i choose reboot system now, and again, i am in System recovery , even if i only press the + volume or -, with the tablet off, it boots automaticly the system recovery :S
sdesignz said:
yes i can do everything but it doesn't fix anything :C
and yes, i've tried the ressetting via reset button.
i can swear you there is no dopo GS-918 model drivers or rom in the whole web u.u
I contacted them but they only told me about the recovery menu, and i send them a question but they haven't answered me yet.
((((
now the pc recognizes the tablet via usb, well, it recognized first like vid_1f3a_pid_efe8_driver, then it disappeared and recognized a M3-CHIP driver but with errors (The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver, blabla.)
so i think i need to find the M3-CHIP driver isn't?
EDIT:
I let the battery ran out, and now shows me the box that says: Android is upgrading, Optimizing app 1,2,3,4,5,6,7 of 39, but never pass the 7 now, then i restart the tablet againt, and say: optimizing app 20 of 23, but it freezes,then i restart the tablet... againt, and say: optimizing app 1 of 7, i restart again the tablet, and then it freezes in the first logo forever, the end :C
So, i think one of those last applications is creating the conflict
EDIT 2:
so, now im stuck in the system recovery, i choose reboot system now, and again, i am in System recovery , even if i only press the + volume or -, with the tablet off, it boots automaticly the system recovery :S
Click to expand...
Click to collapse
I think its banjaxed mate, I think your only hope is if the manufacturer is willing to help you, there are no files available anywhere that I can find, the only thing that might have fixed it is a factory reset, and I guess that is not working from your recovery menu?
Is it out of the question to return it to Dopo?
I suppose you could try running the battery right down again, then leaving it for a while and then restarting again, and keep doing that in the hope that it fires up as its supposed to, but to be honest I have my doubts that it will.
Sorry I cant be of any more help.
oscarblue48 said:
I think its banjaxed mate, I think your only hope is if the manufacturer is willing to help you, there are no files available anywhere that I can find, the only thing that might have fixed it is a factory reset, and I guess that is not working from your recovery menu?
Is it out of the question to return it to Dopo?
I suppose you could try running the battery right down again, then leaving it for a while and then restarting again, and keep doing that in the hope that it fires up as its supposed to, but to be honest I have my doubts that it will.
Sorry I cant be of any more help.
Click to expand...
Click to collapse
well i contacted the dopo tech support guy , to see if i can do something else, i guess there is no mucho to do now, maybe i could sell the tablet for parts :C
too bad because i just have 4 months with it, at least i learned something about android, do a f ucking backup and enable debugging mode xd
thanks for all your help and the given support .
I apreciate your replies and now i know a litte bit of this kind of topics .
oscarblue48 said:
I think its banjaxed mate, I think your only hope is if the manufacturer is willing to help you, there are no files available anywhere that I can find, the only thing that might have fixed it is a factory reset, and I guess that is not working from your recovery menu?
Is it out of the question to return it to Dopo?
I suppose you could try running the battery right down again, then leaving it for a while and then restarting again, and keep doing that in the hope that it fires up as its supposed to, but to be honest I have my doubts that it will.
Sorry I cant be of any more help.
Click to expand...
Click to collapse
The factory reset on these models (DOPO/nobis/apex) only re-initialize the data/cache partitions it will not touch/fix the system partition.
Based on the gist of the initial post -- the only solution is to send the tablet to the factory so that they can reload the firmware.
I am in the same boat right now...
Originally I had some file system errors on the internal nand (on APEX GS-918) that caused the boot animation to loop endlessly -- because I had 'USB Debugging' enabled' I was able to open a adb shell
and run fsck/e2fsck and fix it.
But I have a similar problem now (possibly due to adding an option in build.prop) and also disabled 'USB Debugging' and
I can no longer use adb to open a shell during the boot logo.
PS: I hate to necro a thread -- but people need to know that the issue, described, is by-design........they want you to send it in the factory.
When doing a factory reset, any respectable stock recovery, should restore the system partition.
PPS: I do not believe you can install and update in the stock recovery that attempts to write to the system partition.
I believe that can only be handled by using various amlogic tools (such as amlogic usb burning tool, which requires the firmware image that we don't have)