[Q] Help in reading Logcat and dmesg -Noob - General Questions and Answers

My phone is a samsung s5300(Galaxypocket) I'm using a stockfirmware XXlf5.
I flashed a kernel from this thread http://forum.xda-developers.com/showthread.php?p=33672685 , kernel is based from the same stockrom
Then I flashed Pimp my Rom from this thread http://forum.xda-developers.com/showthread.php?t=1908269 LDPi version. I applied tweaks that i understand.
The phone boots up but as soon as the boot animation, It starts vibrating in a 2x vibrate-pause-1xvibrate. The phone is usable but the problem is the constant vibration.
The kernel works well alone but once I apply the tweaks in Pimp my Rom it starts vibrating.
Here are the logcat and dmesg I got from getlogs.apk from this thread: http://forum.xda-developers.com/showthread.php?t=1123129&page=10

Related

[Q] [Help] Galaxy S - Glitch V7C - 1.5GHz with MIUI Rom

Im using MIUI Rom RC7 v1.4.29. I tried to install this new kernel after cleaning using ultimate kernel cleaning script by lippol94 and then the phone just stays in the logo screen and does not boot.
Tried this process twice with no success. I would appreciate if someone could help me please.
Thanks for your time.

[Q] proble mikfroyo 4.5

hi im using mikfroyo 4.5 with netarchy-toastmod 4.3.1 bfs-havsnosbc
the rom was running very fast and smoth but i tried to change the lockscreen theme i feel i did everything fine but when i rebooted the phone it did not turn on it just stock on the white screen i tried to change the kernel and re-flash the rom but it just does the same thing .. the only way to turn on the kernel is flashing the kernel again..
any suggestion??
Sent from my PC36100 using XDA App
any of the readings go beyond a maximum level, or the train driver fails to respond to abnormal readings, emergency brakes will be automatically switched on, the report said.

[Q] Flashed cyanogen mod 10.1, stuck at boot animation

I flashed the Cyanogen mod 10.1 nightlies for 2013-01-05. The boot animation was running for an abornomally long time so I pulled the battery and booted up and now the boot animation will not stop running. I tried searching for help but with no avail I have not found it too fix this problem. Also I made a CWM backup.
jubjubcat said:
I flashed the Cyanogen mod 10.1 nightlies for 2013-01-05. The boot animation was running for an abornomally long time so I pulled the battery and booted up and now the boot animation will not stop running. I tried searching for help but with no avail I have not found it too fix this problem. Also I made a CWM backup.
Click to expand...
Click to collapse
Also after trying too restore it, I just get the error Couldn't find directory no files found.
jubjubcat said:
Also after trying too restore it, I just get the error Couldn't find directory no files found.
Click to expand...
Click to collapse
Nevermind fixed it.
How did you fix it? rh
How did u fix it? I am facing a similar problem.
and when i tried to upgrade from cm10 to cm10.1 i was stuck at "Android is upgrading - Starting apps" screen. and a fresh installation of cm10.1 was stuck at the boot animation.
I am using Siyah Kernel 1.8.7 and having cyanogenmod as my secondary rom.
Plz help somebody
utsav7r said:
How did u fix it? I am facing a similar problem.
and when i tried to upgrade from cm10 to cm10.1 i was stuck at "Android is upgrading - Starting apps" screen. and a fresh installation of cm10.1 was stuck at the boot animation.
I am using Siyah Kernel 1.8.7 and having cyanogenmod as my secondary rom.
Plz help somebody
Click to expand...
Click to collapse
SiyahKernel s3-v1.8.8
Posted on January 13, 2013
Changelog
rebased on i9300 update7 sources (sudden-death issue is supposedly fixed in this source drop)
reverted temporary fix for exynos-mem exploit as i9300-update7 sources already fix that
cm10.1 is now supported in dual-boot configurations
1.8.7->1.8.8: fixed cm10.1 not booting when installed as 2ndROM (a tiny typo in ramfs)
BUT,it doesn't work anyway (just trying now at it's stuck on the boot screen)
Just try it and report back! :good:
You do realize that the siyah kernel is for the international S3 which has different hardware then our s3? If you are using a kernel for a different phone then of course it wont boot....
R: [Q] Flashed cyanogen mod 10.1, stuck at boot animation
By "International", you mean the exynox version unlocked right?
Sent from my GT-I9300 using xda app-developers app
R: [Q] Flashed cyanogen mod 10.1, stuck at boot animation
Whatever, it's been released v1.8.9 and it's said to fix the CM10.1 issues
Sent from my GT-I9300 using xda app-developers app
Flash problems
I've had installs stick at the boot animation or shortly thereafter several times. Usually it's because of a dumb mistake. The only thing that's consistently worked for me is flashing back to stock VZ firmware via Odin and doing the whole process over from root through installation. It sucks but it always works.
Howdy.
I've just flashed CyanogenMod 10.1 - 20130315 to my droid 4 with Safestrap, and I haven't been able to boot into it; the cyanogenmod splash screen with the rotating wheel graphic shows up, but it spins for upwards of 40 minutes without doing anything.
I followed the guide on the cyanogenmod wiki for the droid 4 device. The forum won't let me post a link to it.
Before I installed I wiped / factory reset, and after install I wiped cache/dalvik; still no dice. I've tried doing the same process several times (even wiking the system before trying to reflash), but the same result has always occurred: ever unhelpful eternal wheel...
I'm a bit at my wits end; I haven't been able to find any other information about this that wasn't solved by wiping cache / dalvik, so I turn to y'all for help.
Same here
I installed Cyanogenmod 10.1 with CWM the link:[Recovery/Bootstrap][5-sep-2012] CWM Touch recovery v6.0.1.1 - xda-developers and i went ahead and installed the mod: cm-10.1-20130211 all went fine untill i noticed that my camera is not working (not a big deal) but then i noticed that my phone only saw 488MB out of my 32GB this was un acceptable after i found how to connect my phone to my pc so it showed up as a storage device do that i copied the same mob but a different version (cm-10.1-20130129_v2) so i went ahead and booted into Android system recovery <3e> and i did a factory reset and then i said oh f*** i need CWMR to install the thing so i just waited for it to do its thing and then reboted the device thinking after i boot up i will reinstall CWMR but i was never able to boot because im stuck on the boot animation. Been waiting for +20min or so and nothing please help me what can i do this is my only phone please help
help with CM10.1 ROM issue
Hi folks,
this is my first post on XDA. I have a Sprint htc EVO 4G LTE phone which was running on JB.
Thought of root and flash with CM. So, first I unlocked the bootloader using htc dev and installed TWRP custom recovery and then rooted.
Then I flashed the stable CM 10 then flashed gapps which is compatible for CM 10 version. so far so good. oh, btw I did nandroid backup before flash and also wiped to factory reset, cache and Delvic cache.
After the flash i clicked on reboot system and I see the Cyanogenmod boot, but its stuck at that stage and I waited for more than an hour. No luck.
Thank god I did back up before this, otherwise not sure what I'm gonna do.
But, could someone tell me why it gets stuck at this point. I know some of you guys had this problem. I searched everywhere but didn't get help. I thought of posting this in android development forum, but as a newbie I can't do that.
Please help me out.
P.S: when I'm on boot screen (power button + vol down button) I see unlocked at the top but I also have TAMPERED in red color on top of that. Was this normal? or do you think that is causing the problem? and what should I do now?
(First of all I am not an expert)
It happens sometimes about 1/10 of every flashes I did with cm10
It might because some files didn't get copied or got corrupted.
Just try this method
Format data
Format system
Format cache
Wipe dalvick cache and factory reset
Now flash the ROM
Hit thanks if I helped
Sent from my WT19i using xda app-developers app
---------- Post added at 11:35 PM ---------- Previous post was at 11:27 PM ----------
(First of all I am not an expert)
First wipe every thing(system,data,cache,dalvick,android secure....)
Now install ROM,
Wait don't install gapps
Now find an extended cm10.1 kernel or lupus kernel(or such kernels) for your device and flash it via pc
I prefer flashing kernel after installing the rom
Hit thanks if I helped
Sent from my WT19i using xda app-developers app
NEED HELP Cm9
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
neso97 said:
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
Click to expand...
Click to collapse
Ask in the Xperia X10 mini forums.
Three-finger salute
Ran into this situation today when I tried to restore a backup and I couldn't get past the CM10 logo on bootup. Holding down all three buttons, power, volume up and down, got me back to the Clockworkmod boot screen.
ETA: Sorry, posted in wrong forum. My situation pertained to a Samsung Galaxy 5 Media Player.
neso97 said:
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
Click to expand...
Click to collapse
Hi...i just happened to flash my x10 mini to cm9-robyn yesterday...same thing happpened to me...boot the animation until run of battery....i accidently booted it to recovery and just leave it...fortunately after sometime it booted by itself and run as normal. The cm9 run ok except the wifi is not working. Hope that will help. I am not an expert.

Bricked!

After installing blisspop (or I don't really remember), I realized that WiFi wasn't working and neither was bluetooth so I decided to flash Extended Stock Kernel kernel, first with flashing the boot, then flashing the zip from recovery mode and even after that, the result was the same. It didn't work. Later on I went to the Phantom kernel's page and flashed that without checking that the kernel was meant for 4.4 and it bricked my device. Now, whenever the phone starts, it shows the Phantom kernel boot at start with its logo without any led light appearing below and due to that I'm unable to go into either flashmode or fastboot. It keeps restarting the Phantom boot at start and doesn't go any further. Please help!
EDIT: A more detailed version that I wrote a few months ago to the kernel's developer.
-
Previously I had my Xperia L reset on stock ftp then flashed the Extended Stock Kernel on it. Since the wifi wasn't working, I tried to download R17 and flashed it through CWM and now the phone keeps restarting on the Phantom Logo. It shows the logo, waits for about 10 seconds then restarts and the same keeps repeating. I saw it was for Kitkat but then too I insisted on installing. I can't access neither bootloader nor recovery mode. The light which comes when the Phantom Logo pops doesn't appear either. Can you help me please? Anything would be greatly appreciated. I know I did a stupid thing but I really don't want to give up on this device.
-
Xephor_EX said:
After installing blisspop (or I don't really remember), I realized that WiFi wasn't working and neither was bluetooth so I decided to flash Extended Stock Kernel kernel, first with flashing the boot, then flashing the zip from recovery mode and even after that, the result was the same. It didn't work. Later on I went to the Phantom kernel's page and flashed that without checking that the kernel was meant for 4.4 and it bricked my device. Now, whenever the phone starts, it shows the Phantom kernel boot at start with its logo without any led light appearing below and due to that I'm unable to go into either flashmode or fastboot. It keeps restarting the Phantom boot at start and doesn't go any further. Please help!
EDIT: A more detailed version that I wrote a few months ago to the kernel's developer.
-
Previously I had my Xperia L reset on stock ftp then flashed the Extended Stock Kernel on it. Since the wifi wasn't working, I tried to download R17 and flashed it through CWM and now the phone keeps restarting on the Phantom Logo. It shows the logo, waits for about 10 seconds then restarts and the same keeps repeating. I saw it was for Kitkat but then too I insisted on installing. I can't access neither bootloader nor recovery mode. The light which comes when the Phantom Logo pops doesn't appear either. Can you help me please? Anything would be greatly appreciated. I know I did a stupid thing but I really don't want to give up on this device.
-
Click to expand...
Click to collapse
yea.... output battery... reinput it.... DONT TOUCH POWERBUTTON.... holf vol - and connevt to pc
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
yea.... output battery... reinput it.... DONT TOUCH POWERBUTTON.... holf vol - and connevt to pc
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
-
It worked, I flashed the generic ftf and everything's okay. Thank you so much!
-

XT1033 : ROM Bootup gets hangs every time

Hi Guys,
Prelude : 2 months back, my pure stock Moto G experienced i guess a battery drain and refused to start the next time onwards. When it was powered on, it just got stuck on the M Logo of the bootup. After the help from @lost101 & others, i was able to flash the custom recovery & rom and got the phone to bootup atleast although faced the same issue which i'll be writing below now.
Since that event has happened, everytime I flash a custom rom, the installation happens without any glitch which includes the rom.zip & gapps_pico.zip. Now when the ROM bootups, the startup screen shows up after which it starts optimizing apps. That's where is the issue starts.
For eg. optimizing app x (single digit) of 101, it doesn't goes beyond that point even after waiting for 15-20 mins or so, and i've to manually reboot using the power button after which again the optimizing apps screen comes up and this time the figure is optimizing app xx of 16/17, and in this turn the phone successfully boots up to the setup screen and works as normal. But after a few moments when i'm done setting up all my apps and everything, random issues turn up for eg. the notification quick tiles won't drop down. And when i restart the handset, again it shows the optimizing apps screen, the phones boots up to home screen but random issues pertain.
I've tried ROM's like Stock Debloated (5.1.1) , CrDroid, CyanPOP, RessurectionRemix all based on 6.0.1.
Before installing any ROM, i do an advanced wipe and all format the data. Right now the handset is running CyanPOP but the main issue is i'm unable to access the notification dropdown. It doesn't goes beyond the header.
One more thing, I installed RR (xt1022 specfic) with same pico_gapps on my Moto E & the rom booted up in no time and working as smooth as butter till date with no issues whatsoever.
I'll be helpful if some one can diagnose the issue. Thanks
BBThumbHealer.
Did you try flash stock firmware and then flash a costum ROM ?
@Eurofighter_ty : when the issue first happened, what I remember is that I tried installing the debloated stock ROM of 5.1.1 and not the pure stock having all the unnecessary gapps. And similar issue was encountered. Same thing happened with other custom ROMs.
Today I've now reverted to a previous version of CrDroid 6.0.1 released in April and it at least runs fine when in use although a reboot causes the same issue. However, CrDroid June update and CyanPOP had the issue in which the quick tiles didn't drop down along with refusal of bootup.
Try to flash the stock ROM via fastboot with all files

Categories

Resources