Database Info

[Q] Please Help. I soft bricked my Samsung Galaxy Tab P6200

I rooted my tablet (p6200) days back and installed CM9 to try it. I was quite happy, but somehow I decided to get back to my Stock ROM. I tried the method written here :
mobilecon.info/flashing-rom-honeycomb-3-2-at-samsung-galaxy-tab-7-plus-p6200.html
Instead of uploading the StockROM (using Odin) in PDA, I accidently clicked Phone. It took an hour and rebooted.
But after then nothings happening: It tries to load CM9 only and not the stock ROM and stops at a screen which says "Encryption unsuccessful".
After that I am trying to re install stock ROM using ODIN in PDA mode but it gives the error as pasted below.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6200DDKL2_P6200ODDKL1_P6200DDKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help!!!! I am sad.

P6200
I have the same problem... You found something to fix it??

techsavy.ravi said:
I rooted my tablet (p6200) days back and installed CM9 to try it. I was quite happy, but somehow I decided to get back to my Stock ROM. I tried the method written here :
mobilecon.info/flashing-rom-honeycomb-3-2-at-samsung-galaxy-tab-7-plus-p6200.html
Instead of uploading the StockROM (using Odin) in PDA, I accidently clicked Phone. It took an hour and rebooted.
But after then nothings happening: It tries to load CM9 only and not the stock ROM and stops at a screen which says "Encryption unsuccessful".
After that I am trying to re install stock ROM using ODIN in PDA mode but it gives the error as pasted below.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6200DDKL2_P6200ODDKL1_P6200DDKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help!!!! I am sad.
Click to expand...
Click to collapse
Use repartitioning
The only way to fix this is to repartition your phone with a .pit file that has been designed not to use the the corrupted sectors of your internal storage.IMPORTANT NOTE : Remove your SD Card and SIM CARD PleaseRun ODIN IN ADMIN Modea) Now you have to repartition your tab plusb) Download the following (Importantly the .pit file)
Pit.file p6200

To know which pit files u have to use, scan your sd card for bricked blocks, with a tool you will find in the link below. Repartition you sd card afterwards with the specific pit file for your bricked blocks.
Otherwise you will lose 15gb of your storage. 1gb left.
You will also find a tutorial for swapping internal and external storage for taht case in thelast post.
Tutorial with links and information here: http://forum.xda-developers.com/showthread.php?p=31897110
Hit thanks!
Sent from my GT-P6200 using xda app-developers app

Bad2hold said:
To know which pit files u have to use, scan your sd card for bricked blocks, with a tool you will find in the link below. Repartition you sd card afterwards with the specific pit file for your bricked blocks.
Otherwise you will lose 15gb of your storage. 1gb left.
You will also find a tutorial for swapping internal and external storage for taht case in thelast post.
Tutorial with links and information here: http://forum.xda-developers.com/showthread.php?p=31897110
Hit thanks!
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
mine to.... have i do the same thing ??
hai everybody.... i'm from indonesia.., my friend just give me samsung galaxy tab 7 plus... ( GT-P6200 ) without any boxes, last day i try to get ICS update from kies , but the application won't update my firmware , so i try the alternative direction.
i try another application - Odin3-v1.85 and download the firmware..., but the fact is after few second running it self , the prosess can't continues get fail after
<ID:0/017> Firmware update start..
<ID:0/017> cache.img
<ID:0/017> NAND Write Start!!
<ID:0/017> factoryfs.img
<ID:0/017> hidden.img
<ID:0/017> recovery.img
<ID:0/017> Sbl.bin
<ID:0/017>
<ID:0/017> Complete(Write) operation failed. >>> FAIL...
anyone can help me .... please
HOW to scan the sdcard , my tab can't load boot , i can run recovery mode to ....?? so how to chose the right one ??

Confused
devid801 said:
Use repartitioning
The only way to fix this is to repartition your phone with a .pit file that has been designed not to use the the corrupted sectors of your internal storage.IMPORTANT NOTE : Remove your SD Card and SIM CARD PleaseRun ODIN IN ADMIN Modea) Now you have to repartition your tab plusb) Download the following (Importantly the .pit file)
Pit.file p6200
Click to expand...
Click to collapse
******************************
Hiya mate,
I downloaded the .PIT file and got two folders, one says Patched and the other is Stock, and I don't know which to go for.
Stock gives me one file, the patched gives me awful lots and with different sizes, sizes for what; I don't know.
Can you help me with that??
**Note: My tab reboots after showing the Samsung Logo for a few seconds.
**I also tried installing the stock ROM using Odin which I downloaded from the samfirmware website and it still does the same thing.
Regards
Earle

[Q] bricked device

i was trying to install a recovery with mobile odin than the device got into a boot loop showing only Samsung boot screen i cant get into a recovery mode i can into download mode, but i do that and connect my device to the computer to odin every thing seems normal except that when i try to flash any thing with odin it takes forever and nothing happens till the device runs out of battery. any advice please

come on guys n one can help me here

Mr.Doc said:
come on guys n one can help me here
Click to expand...
Click to collapse
When that happened to me I did a hard reset and then flashed the firmware. Don't know if that helps, a year has passed since I did that.

Mr.Doc said:
i was trying to install a recovery with mobile odin than the device got into a boot loop showing only Samsung boot screen i cant get into a recovery mode i can into download mode, but i do that and connect my device to the computer to odin every thing seems normal except that when i try to flash any thing with odin it takes forever and nothing happens till the device runs out of battery. any advice please
Click to expand...
Click to collapse
What happend that caused your note to get into boot loop? Did it went loop after flashing or something ? When u get into recovery which recovery does it show ? And at the end what are u now trying to flash can u please paste odin message which it shows in the left pain ?

:highfive: it worked finally ive downloaded a new rom from from sammobile 4.4.2 and tried it and it worked like a charm I dnt what happened but it worked and my note is doing fine now thank u guys :good:

Mr.Doc said:
:highfive: it worked finally ive downloaded a new rom from from sammobile 4.4.2 and tried it and it worked like a charm I dnt what happened but it worked and my note is doing fine now thank u guys :good:
Click to expand...
Click to collapse
Good to hear :victory:

Mr.Doc said:
:highfive: it worked finally ive downloaded a new rom from from sammobile 4.4.2 and tried it and it worked like a charm I dnt what happened but it worked and my note is doing fine now thank u guys :good:
Click to expand...
Click to collapse
Glad ur saved..

Brick city!
sbdanish911 said:
Glad ur saved..
Click to expand...
Click to collapse
I have a situation where my VZW LTE SCH-i925 can only access download mode; this was the result of a failed attempt to root/update ROM. I have tried flashing the stock firmware with the below results. I have sourced a PIT; however, when flashed it to fails. I have searched the forums for quite some time and I cant seem to locate anything solid that works. Did you flash KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5 succesfully or is there another ROM on sammobile that I missed?
I have located the following files for the SCH-i925:
recovery1.tar.md5
sboot.bin
SCHI925.PIT
These files were found at http://forum.xda-developers.com/showthread.php?t=2252630
I have also downloaded stock firmware from http://www.sammobile.com/firmwares/3/?download=24285
KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5
I also have:
KIES_HOME_I925UVXAMD1_I925UUSCAMD1_1098858_REV00_user_low_ship.tar.md5
Nothing I do seems to work. I see a progress bar but invariably NAND write fails at some point. Can anyone give some guidance? I know search is my friend but apparently I am very lost. Please help, thanks!
Below is the Odin error I receive when flashing the stock firmware from sammobile.com:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Hello everyone! My case is the following: I bought very cheap bricked Galaxy Note with the help I’ll manage to fix it, but as far my attempt are not successful.
The first thing is that I don’t know the exact model of the tablet. On its back it’s written GT-N8000, but when I boot it in Odin download mode it’s says GT-N8020. Which of them should I believe? Is it possible that it is indeed GT-N8000 but someone tried to flash it with the wrong ROM?
As for the tablet it goes through the “Samsung Galaxy Note 10.1” logo and the proceeds with the “Samsung” boot image and that’s all, it never loads the Android OS.
It doesn’t also boot in recovery mode, but only in download mode – the Odin.
When I try to flash any TWRP for the model (both for GT-N8000 and GT-N8020) it’s unsuccessful, the same is with the stock ROMs for the both models. I tried different ROM files, different TWRP versions, different USB ports, different laptops – the result is the same. I didn’t try different USB cables because I have only one, but the same cable works flawlessly for file transfers with my other GT-P5100. I also tried with the PIT files, but the result again is the same. And here is the log file when I try to flash with TWRP with Odin.
<ID:0/028> Added!!
<ID:0/028> Odin engine v(ID:3.1401)..
<ID:0/028> File analysis..
<ID:0/028> Total Binary size: 7 M
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> NAND Write Start!!
<ID:0/028> SingleDownload.
<ID:0/028> recovery.img
<ID:0/028> FAIL!
<ID:0/028>
<ID:0/028> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Impossible to understand your multiple posts .
Bricked , modem .bin . nand write .
Reads as Nand failed throw it in the bin .

[Q] Galaxy S6 Bootloop Help

First time poster on here, long story short, I tried to root a Galaxy S6 sm-g920f with cf-auto-root. However, that put the phone into a bootloop. I have since downloaded the official g920f patch and it always FAILS right at the end after it says radio. It then stays on downloading screen. Anyone know how to fix this?
Any help is much appreciated.

Flash with stock ROM via odin.

arhjay said:
First time poster on here, long story short, I tried to root a Galaxy S6 sm-g920f with cf-auto-root. However, that put the phone into a bootloop. I have since downloaded the official g920f patch and it always FAILS right at the end after it says radio. It then stays on downloading screen. Anyone know how to fix this?
Any help is much appreciated.
Click to expand...
Click to collapse
Donwload stock rom from Sammobile.com and flash it via Odin / Download mode.

roydok said:
Flash with stock ROM via odin.
Click to expand...
Click to collapse
That's what I've been trying to do but it comes up fail still.
Tried another and it failed at writing NAND

With the sammobile one it gets stuck at SetupConnection
Screenshot below ( can;t post links yet
i . gyazo . com/96ec1ff68247a625c65fdd1b45ad138a.png

<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOE3_G920FBTU1AODQ_G920FXXU1AOE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin engine v(ID:3.1005)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> sboot.bin
<ID:0/013> NAND Write Start!!
<ID:0/013> FAIL!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thats the sammobile stock rom

When trying to flash I get this message in red on download mode screen.
SW REV. CHECK FAIL. DAVICE: 2 BINARY: 1

Try changing ports from USB 2.0 to USB 3.0. Repeat flash as many times until you succeed. Took me 13x 1st time I flash 5.1.1.

roydok said:
Try changing ports from USB 2.0 to USB 3.0. Repeat flash as many times until you succeed. Took me 13x 1st time I flash 5.1.1.
Click to expand...
Click to collapse
Ok, going to try that now, thanks for the reply

This will come to Pass.

roydok said:
This will come to Pass.
Click to expand...
Click to collapse
Turns out my computer doesnt have usb 3... However, now I get stuck at SetupConnection
May try using jodin on macbook
EDIT: Getting the same nand write error now again

Ok, so after trying to reflash with AutoRoot it gets stuck on the start up splash "Samsung Galaxy s6 powered by android). At the top it says "RECOVERY IS NOT SEANDROID ENFORCING"
Please help

Try using another micro USB cable.

SM-N915A , unable to boot, Odin failed, now bricked.

Hi All,
I was using the SM-N915A as normal...then i left it idle for a while and came back saw it kept resetting itself. I tried clear cache partition already didnt' work. It keeps looping on startup after the samsung logo. It got worst as time went on, it wont even load into recovery anymore, it just loads with the android icon saying it's updating then freezes and restarts....I read that I can manual recover using Odin. I used odin and a stock rom to fix it, but the rom failed now i am bricked. Please help.
Odin3 v3.10.7
Stock Rom: AP_N915AUCU1BOC6_CL4376893_QB4361884_REV00_user_low_ship_MULTI_CERT.tar
Log
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point i am bricked..."the phone just says firmware upgrade encountered an issue please recover mode in Kies and try again" Kies/SS doesn't work, when i plug in this phone, it doesn't recognize it.
What can I do now?

pubtemp said:
Hi All,
I was using the SM-N915A as normal...then i left it idle for a while and came back saw it kept resetting itself. I tried clear cache partition already didnt' work. It keeps looping on startup after the samsung logo. It got worst as time went on, it wont even load into recovery anymore, it just loads with the android icon saying it's updating then freezes and restarts....I read that I can manual recover using Odin. I used odin and a stock rom to fix it, but the rom failed now i am bricked. Please help.
Odin3 v3.10.7
Stock Rom: AP_N915AUCU1BOC6_CL4376893_QB4361884_REV00_user_low_ship_MULTI_CERT.tar
Log
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point i am bricked..."the phone just says firmware upgrade encountered an issue please recover mode in Kies and try again" Kies/SS doesn't work, when i plug in this phone, it doesn't recognize it.
What can I do now?
Click to expand...
Click to collapse
Get md5 tar file & make sure your in download mode connect phone to Odin and try again

pit file with Odin 3.07 0 3.09 single and tell me how it went
pubtemp said:
Hi All,
I was using the SM-N915A as normal...then i left it idle for a while and came back saw it kept resetting itself. I tried clear cache partition already didnt' work. It keeps looping on startup after the samsung logo. It got worst as time went on, it wont even load into recovery anymore, it just loads with the android icon saying it's updating then freezes and restarts....I read that I can manual recover using Odin. I used odin and a stock rom to fix it, but the rom failed now i am bricked. Please help.
Odin3 v3.10.7
Stock Rom: AP_N915AUCU1BOC6_CL4376893_QB4361884_REV00_user_low_ship_MULTI_CERT.tar
Log
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point i am bricked..."the phone just says firmware upgrade encountered an issue please recover mode in Kies and try again" Kies/SS doesn't work, when i plug in this phone, it doesn't recognize it.
What can I do now?
Click to expand...
Click to collapse

ltindi32 said:
pit file with Odin 3.07 0 3.09 single and tell me how it went
Click to expand...
Click to collapse
Thanks, I managed to use the pit file and it got pass the brick page.
However, now the system goes into the Samsung Galaxy Note Edge loading screen and just stays there for a very long time and then restarts itself again....I pulled the battery out to manual shutdown (power button will not shut it down) and tried to go into recovery mode, it says loading recovery, but ends up restarting back to the Samsung loading screen indefinitely again. I would assume that's because the rom is dead at this point, and I would need to go to dl mode and flash a new stock rom back in ? What is my next step ?

pubtemp said:
Thanks, I managed to use the pit file and it got pass the brick page.
However, now the system goes into the Samsung Galaxy Note Edge loading screen and just stays there for a very long time and then restarts itself again....I pulled the battery out to manual shutdown (power button will not shut it down) and tried to go into recovery mode, it says loading recovery, but ends up restarting back to the Samsung loading screen indefinitely again. I would assume that's because the rom is dead at this point, and I would need to go to dl mode and flash a new stock rom back in ? What is my next step ?
Click to expand...
Click to collapse
I will upload the stock n915a cu2co2 5.1.1 for mega t pass the link to try with that

ltindi32 said:
I will upload the stock n915a cu2co2 5.1.1 for mega t pass the link to try with that
Click to expand...
Click to collapse
is this filmware with Odin3_v3.10.7. chek mark nand flash erase ALL_ATT_N915AUCU2COI2_N915AATT2COI2_CL5613658_QB6196305_REV00_user_low_ship_MULTI_CERT.tar.md5 enter the recovery mode and give him a factory resset and clear cache and comment. I improved my with this procedure. download it from herehttps://mega.nz/#!Ax5zEShb

ltindi32 said:
is this filmware with Odin3_v3.10.7. chek mark nand flash erase ALL_ATT_N915AUCU2COI2_N915AATT2COI2_CL5613658_QB6196305_REV00_user_low_ship_MULTI_CERT.tar.md5 enter the recovery mode and give him a factory resset and clear cache and comment. I improved my with this procedure. download it from herehttps://mega.nz/#!Ax5zEShb
Click to expand...
Click to collapse
It says I need the decryption key in order to dl the file.

pubtemp said:
It says I need the decryption key in order to dl the file.
Click to expand...
Click to collapse
!bawMPPRshf_1tFt1xeqtXh1a9zP1ow5KkRYaJlhXWf8

Hey guys, i have 1:1 the same problem with my n915fy. It dont boot and when i try to get in recovery it just stuck on booting recovery.
Have anyone the files for me too? I bought the phone Bricked.
Edit: Things I already tried:
Installed stock 5.1.1 per odin
Installed 5.1.1 per odin while checked the mark Nand earse all
Installed 4.4.4 per odin
Installed CWM per odin
Still stuck on Samsung Galaxy booting logo, when i try to go in Recovery menu its calls: " Recover booting" but just restart after one minute.
Hope someone can help me...
Btw where can i get pitfiles and would it help when i patch one?

pubtemp said:
Thanks, I managed to use the pit file and it got pass the brick page.
However, now the system goes into the Samsung Galaxy Note Edge loading screen and just stays there for a very long time and then restarts itself again....I pulled the battery out to manual shutdown (power button will not shut it down) and tried to go into recovery mode, it says loading recovery, but ends up restarting back to the Samsung loading screen indefinitely again. I would assume that's because the rom is dead at this point, and I would need to go to dl mode and flash a new stock rom back in ? What is my next step ?
Click to expand...
Click to collapse
You know what, try to clean power button. It may sticks. Pull battery and put small drop of rubbing alcohol. Then press couple times ( with out battery). Let dry for 10 min( you may use hair dryer on low power) . Put battery back and let us know.
Sent from my SAMSUNG-SM-N920A using XDA Premium HD app

Hey, i having the same problem, i was wondering if someone could make a step by step guide on how to fix it. also mine says mmc: mmc_write fail.
When i did Nand erase it says
mmc: mmc_read fail
ERASING USERDATA PARTITION

My SM-N915A went full dead on incomplete upgrade. Tried everything possible no lights, no vibration, no nothing: fill dear brick.
Was told its emmc corrupt.
Kindly help

can't you use samsung kies?

Hi to all. I was trying to recover some files with DrFone when it tried to root my phone. The rooting process failed and the phone bricked. If I try to power it on, it appears the writing "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Obviously kies can't connect to the phone.
If I press pwr+vol_dn+home and then select "volume up" the phone goes in download mode but doesn't accept the reset of drfone, the download process freeze at half...
What can I do?
Thanks in advance!

try flashing only pitt file

is there anyone that does this upload , reload repair for others. are is there instructions to follow somewhere?

ltindi32 said:
pit file with Odin 3.07 0 3.09 single and tell me how it went
Click to expand...
Click to collapse
thanks for the pit file,saved my n915a after encountering "DRK error" after the 6.0.1 update. Cheers

Successful Flashing via Odin but stuck at Samsung Logo and cannot access recovery

Hi,
I'm a new member for this community with a bit of a limited experience in Flashing.
My Samsung Galaxy Tablet 10.1 GT-N8000 was stuck in a boot loop when turning on and even when charging.
I decided to check the xda forums and similar threads regarding my issue to try out some resolution to my problem:
What I have tried so far was:
1. Tried doing the standard hard reset which was Power + Volume +/Up = No response
2. Tried Flashing the Stock ROM I got from sammobile for my region using different versions of Odin( just to check)
The flash goes successful with the following logs in Odin:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXUDNE5_N8000OLBDNE3_N8000DXUDND1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> param.bin
<ID:0/006> recovery.img
<ID:0/006> sboot.bin
<ID:0/006> system.img
<ID:0/006> tz.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Completed..
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Removed!!
But when it reboots its stuck at the Samsing Galaxy Note 10.1 logo and it stays there for the longest without a hint of turning off.
As per reading previous threads about the same concern, I tried to:
-Access the recovery by pressing Power+Volume up - the screen will display the Samsung logo, then go to a blank screen the just reboots back to the "infinite logo".
-As I was desperate, I already had tried to re-flash the tablet together with a PIT file and the firmware above as well as a combination of the PIT file and just TWRP(openrecovery-twrp-2.6.1.0-p4notewifi) or Philz Touch (philz_touch_6.12.8-i9500.tar), it results to the same blank screen > reboot> infinite logo scenario.
I'd like some humble assistance from established members who had resolved this issue as I am in dire need for having this tablet fixed.
Thanks a bunch and in advance as well

Possible probable wrong PIT file used .Certainly you used wrong model recovery its not I9500 is it .
See multiple identical posts .

JJEgan said:
Possible probable wrong PIT file used .Certainly you used wrong model recovery its not I9500 is it .
See multiple identical posts .
Click to expand...
Click to collapse
Thanks for the reply.
The I9500 that I tried was for recovery file, but since it did not work, I also tried the TWRP as indicated in the post but still it had the same results
*Correction - the recovery file I used for Philz Touch was philz_touch_6.48.4-n8000.tar.md5 as JJEgan stated I used the the wrong model of recovery*
The PIT file that I used was the same one that was on this post : https://forum.xda-developers.com/galaxy-note-10-1/general/n8000-stuck-samsung-logo-t3212923 - Since he reported success in his endeavor to revive same device, I used the same PIT file, but still the same results.
If anyone could still help out, I'll be more than grateful.

thunderhavoc said:
Thanks for the reply.
The I9500 that I tried was for recovery file, but since it did not work, I also tried the TWRP as indicated in the post but still it had the same results
*Correction - the recovery file I used for Philz Touch was philz_touch_6.48.4-n8000.tar.md5 as JJEgan stated I used the the wrong model of recovery*
The PIT file that I used was the same one that was on this post : https://forum.xda-developers.com/galaxy-note-10-1/general/n8000-stuck-samsung-logo-t3212923 - Since he reported success in his endeavor to revive same device, I used the same PIT file, but still the same results.
If anyone could still help out, I'll be more than grateful.
Click to expand...
Click to collapse
Hello, did you ever find a solution? I'm facing a similar problem with my unit.
Thanks.
Sent from my SM-N920C using Tapatalk

I'm facing a similar problem with my unit.

Lack of information does not help.OP is i9500 not Note 10.1.
Read the thread. Search your problem.