Database Info

T-Mobile still sending out the GB OTA?

I could've swore I read they stopped it? If so then is there anyway to flash the phone and be able to get the baseband? My co-worker's phone keeps rebooting, etc. I don't want to use the LG Update Tool. I bricked my phone and finally got it unbricked after 5 hours.

you are right T-Mobile already stopped rolling out the OTA.
Your only opportunity to get the new baseband is the LG tool
flexnix said:
I could've swore I read they stopped it? If so then is there anyway to flash the phone and be able to get the baseband? My co-worker's phone keeps rebooting, etc. I don't want to use the LG Update Tool. I bricked my phone and finally got it unbricked after 5 hours.
Click to expand...
Click to collapse
Sent From My WeaponG2x

I used the LG tool about an hour after the update was relesed and it went perfectly smooth. What I did was a factory reset before I did it and I dont know if that mattered but I had no problems. I would do it you really have no choice. I thought I read somewhere that someone is working on a version that you can install from SD but I might be wrong and I dont think you will get the new baseband which in my opinion is one of the best things about the update. It is the only part you cant just flash. If you root you can install any ROM like the leaked one or whatever. So I would use the LG updater. The other thing is I have the LG updater on my computer and it starts automatically and it says that their servers are undergoing maintenance so you cant use that either. I hope this helps you
Charlie

flexnix said:
I could've swore I read they stopped it? If so then is there anyway to flash the phone and be able to get the baseband? My co-worker's phone keeps rebooting, etc. I don't want to use the LG Update Tool. I bricked my phone and finally got it unbricked after 5 hours.
Click to expand...
Click to collapse
There are precautions you can take to prevent a bad experience. Most of them are listed on the Forum somewhere. But to recap,
Stock ROM: Install a stock rom. Root does not impact the update, so being rooted is not an issue. Find the Stock Rom and load it.
Standard recovery: Flash the standard recovery. If you are happy with your current rom, do a nand backup first. Then flash the stock ROM.
Factory reset: Throw this in because it can't hurt.
Many of the people that had problems with the LG updater simply did not meet the above steps.
While doing the update, remember, turn off AV, turn off pop up blockers. Turn off FAX programs or any other monitoring program, even screen savers. Do NOT make assumptions. There are several places in the update where the progress appears to stop. Do NOT disconnect. If you have been stopped for a hour, something is wrong. But a few minutes is not out of line. Personally I stopped at 4% for about 5 minutes...then it continued.
Here's the thread to return your device to stock....its pretty good. I can walk through these steps in less than 5 minutes....its really simple. Set your friend up with this.....
http://forum.xda-developers.com/showthread.php?t=1088728
In case you're wondering, the thread above will NOT restore to pure factory like condition. It will NOT restore the original baseband. But all the rest works....its easy to use, simple to follow.....and more than anything else, does not require you to think....only follow. The worst problem people have when doing this is thinking, and assuming. Just follow the steps as is, no ad lib.
Good luck.

I've used the LG Updater on 3 phones, and I haven't had any problems.

I followed this page of instructions from the LG website and had no issues. http://wwwstg.lg.com/us/mobile-phones/G2X-Driver/index.jsp
I used my netbook running Windows 7 Starter Edition.

I just tried updating on the lg website and it says servers down for maintence
Sent from my G2X

kwiggington said:
I just tried updating on the lg website and it says servers down for maintence
Sent from my G2X
Click to expand...
Click to collapse
That is only the first time it runs after you install it. Click start and go to "LGMobile Support Tool" and run the "LGMobile Update" program. It should run this time without the bogus server down message. If you look at the dates in that notice, the maintenance was back in July. Be sure to right click the program and run as administrator if you are running Windows 7. Make sure you install the drivers from within the updater also, as the other driver pack on their website doesn't seem to install all the drivers you need to complete the update. Good luck.

jboxer said:
That is only the first time it runs after you install it. Click start and go to "LGMobile Support Tool" and run the "LGMobile Update" program. It should run this time without the bogus server down message. If you look at the dates in that notice, the maintenance was back in July. Be sure to right click the program and run as administrator if you are running Windows 7. Make sure you install the drivers from within the updater also, as the other driver pack on their website doesn't seem to install all the drivers you need to complete the update. Good luck.
Click to expand...
Click to collapse
I didn't have to run as administrator and I used Windows 7. Following the instructions in the link I posted above I had no issues at all. Drivers were installed separately from the updater, again just following the instructions from that link.
Follow LG's instructions word for word, in order, from start to finish, without skipping any steps, and you shouldn't have any issues.

phburks said:
I didn't have to run as administrator and I used Windows 7. Following the instructions in the link I posted above I had no issues at all. Drivers were installed separately from the updater, again just following the instructions from that link.
Follow LG's instructions word for word, in order, from start to finish, without skipping any steps, and you shouldn't have any issues.
Click to expand...
Click to collapse
Thanks ill try it when i get home
Sent from my G2X

Is anybody working on getting the baseband as a zip that can be flashed, that would be great instead of going through the whole updater tool thing.
Sent from my LG-P999 using XDA App

Updated works awsome now
Sent from my G2X

phburks said:
I didn't have to run as administrator and I used Windows 7.
Click to expand...
Click to collapse
When you ran the program did Windows have a warning box that said this program wants to make changes to your computer, and you had to say yes or no to allow it to continue. That means the program installer set it to admin mode already and Windows confirms you want to run the app as an admin. Without admin mode in Windows 7, programs that flash roms and such simply don't work properly. Looks like LG mitigated a problem by setting the flag during the program install.

jboxer said:
When you ran the program did Windows have a warning box that said this program wants to make changes to your computer, and you had to say yes or no to allow it to continue. That means the program installer set it to admin mode already and Windows confirms you want to run the app as an admin. Without admin mode in Windows 7, programs that flash roms and such simply don't work properly. Looks like LG mitigated a problem by setting the flag during the program install.
Click to expand...
Click to collapse
Yea it asks for that confirmation. The one I used is version 1.5.2.2

Videotron 2.2 security update rom - NOT Gingerbread

Edit: It turns out this is a 2.2 security patch update. The rom version number doesn't make sense for a Froyo rom. Sorry guys.
Here is a link for the KDZ file for the new Videotron GB rom. Since it was just released I am assuming it is 2.3.4 but I don't know for sure. Once people install it they can do a Nandroid backup and post the system image for the rest of us to download. I suspect it includes an updated baseband also. Once we get confirmation people can use the KDZ method to update their baseband and then flash back to the rom of their choice. If someone does flash it during the flashing process please copy and save all the extracted rom files in the C:\ProgramData\LGMOBILEAX\Phone directory. The phone subdirectory is created by the KDZ Updater and creates a dll and a wpb file. Then the LG Updater will further extract the wpd file into the files it will flash.
http://www.multiupload.com/70DYL7FMHF

Now that's what i am talking about!! Thank you so much jboxer!! Now, step by step what do I do?
Thanks!

rapcenter said:
Now that's what i am talking about!! Thank you so much jboxer!! Now, step by step what do I do?
Thanks!
Click to expand...
Click to collapse
Search for the KDZ method to unbrick a device. Use the same method. I am not going to give you a step by step as that is already in that thread. You can search yourself and find it in the development section.

This is a link to the KDZ method thread:
http://forum.xda-developers.com/showthread.php?t=1180331
However, I am confused about this so-called update, as its number is exactly the same version as the stock 2.2.2 Videotron ROM ("LG-P999-AVC-V21d"). Is it really a 2.3.3 or 2.3.4 ROM? I'll try it out but I am skeptical...

GenghisKhan67 said:
This is a link to the KDZ method thread:
http://forum.xda-developers.com/showthread.php?t=1180331
However, I am confused about this so-called update, as its number is exactly the same version as the stock 2.2.2 Videotron ROM ("LG-P999-AVC-V21d"). Is it really a 2.3.3 or 2.3.4 ROM? I'll try it out but I am skeptical...
Click to expand...
Click to collapse
The rom designations are done on a carrier by carrier basis based on how many builds LG does before they have a final release. It has nothing to do with any other roms. The previous rom for Videotron was a v11 rom. When LG jumps the number by 10, it is always a newer version of the OS. It should be a GB rom. We just don't know if 2.3.3 or 2.3.4 until someone flashes it.

Ok, tried the update using my trusty XP Mode virtual machine and got a "failed to decode the file you specify" in the KDZ Updater.

GenghisKhan67 said:
Ok, tried the update using my trusty XP Mode virtual machine and got a "failed to decode the file you specify" in the KDZ Updater.
Click to expand...
Click to collapse
Make sure you got a complete download. The file is 181Mb in size. I was able to get the KDZ program to extract the .dll and the .wdb file but after that if a phone is not attached it won't launch the LG Updater.

GenghisKhan67 said:
Ok, tried the update using my trusty XP Mode virtual machine and got a "failed to decode the file you specify" in the KDZ Updater.
Click to expand...
Click to collapse
As stated in big bold letters in the link jboxer posted.
Note: You MUST do this via a PC running Windows XP. Running Vista/7 in compatibility mode is not going to work, period.

jboxer said:
Here is a link for the KDZ file for the new Videotron GB rom. Since it was just released I am assuming it is 2.3.4 but I don't know for sure. Once people install it they can do a Nandroid backup and post the system image for the rest of us to download. I suspect it includes an updated baseband also. Once we get confirmation people can use the KDZ method to update their baseband and then flash back to the rom of their choice. If someone does flash it during the flashing process please copy and save all the extracted rom files in the C:\ProgramData\LGMOBILEAX\Phone directory. The phone subdirectory is created by the KDZ Updater and creates a dll and a wpb file. Then the LG Updater will further extract the wpd file into the files it will flash.
http://www.multiupload.com/70DYL7FMHF
Click to expand...
Click to collapse
Where's the original source for the Videotron LG P999 update? I looked around Videotron's website and couldn't find it.
Update
I found it on LG Canada's website: http://www.lg.com/ca_en/support/mc-support/mobile-phone-support.jsp
I phoned LG Canada. The CSR told me that it is not an Android update, it is just a patch for Videotron's LG-P999 phones which have a problem receiving text messages.

I am updating right now.
I am at 4% after 4 .30 minutes. (Will update this post as I go)
Still stuck at 4% after 6.51 minutes
After 10.18 minutes still at 4% (now wondering if there is a problem. I have used KDZ numerous times - over 10 phones and have never been this long stuck on the 4% (the Update on the LG SW still flashing. The Phone hows SW upgrade..please wait
At 14.13 minutes..still at 4%
REad Core Memory post.
Did exactly what he did.
Rebbot phone. Install CWM 5.02
Install weapon.Phone still shows as SW upgrade. (even though weapon install was successfil)
I will play with it a bit later. Need to get back to work
jboxer said:
Here is a link for the KDZ file for the new Videotron GB rom. Since it was just released I am assuming it is 2.3.4 but I don't know for sure. Once people install it they can do a Nandroid backup and post the system image for the rest of us to download. I suspect it includes an updated baseband also. Once we get confirmation people can use the KDZ method to update their baseband and then flash back to the rom of their choice. If someone does flash it during the flashing process please copy and save all the extracted rom files in the C:\ProgramData\LGMOBILEAX\Phone directory. The phone subdirectory is created by the KDZ Updater and creates a dll and a wpb file. Then the LG Updater will further extract the wpd file into the files it will flash.
http://www.multiupload.com/70DYL7FMHF
Click to expand...
Click to collapse

SL said:
I am updating right now.
I am at 4% after 4 .30 minutes. (Will update this post as I go)
Still stuck at 4% after 6.51 minutes
After 10.18 minutes still at 4% (now wondering if there is a problem. I have used KDZ numerous times - over 10 phones and have never been this long stuck on the 4%
Click to expand...
Click to collapse
I had that happen to me too when I tried to install the T-Mobile update. After the same problem occurred a few times, I left it at 4% for a while then installed Weapon 3 and it booted with the updated baseband. Apparently, the baseband is the first thing that gets flashed and it may already be installed even though the update is stuck at 4%.

GTWalling said:
As stated in big bold letters in the link jboxer posted.
Note: You MUST do this via a PC running Windows XP. Running Vista/7 in compatibility mode is not going to work, period.
Click to expand...
Click to collapse
I'm running a virtual machine, same as a native XP install. "XP Mode" is NOT the same as "compatibility mode".
jboxer said:
Make sure you got a complete download. The file is 181Mb in size. I was able to get the KDZ program to extract the .dll and the .wdb file but after that if a phone is not attached it won't launch the LG Updater.
Click to expand...
Click to collapse
The download was completed with no error and is the correct size. As I stated above, the process starts but finishes with the error message I posted previously.
That said, I updated the phone using the default Videotron stock ROM referenced in the LG Updater and that worked fine, but that's only on version 2.2.2.

GenghisKhan67 said:
XP Mode is not the same as compatibility mode. I'm running a virtual machine, which is exactly the same as running XP natively. The update craps out because the KDZ file is no good.
Click to expand...
Click to collapse
You're half right. But that also makes you half wrong. I'm a computer tech, so I'm familiar with the fact that running something in an emulated environment isn't the exact same thing as running in a real environment. You're running a virtual machine, it's an emulation, not the real thing, programs don't always work the same under emulation versus the real world (for lack of a better term). If this is that big of a deal to you, go find a place, such as a copy shop, where you can run the necessary software from inside XP, either that or set yourself up with a dual boot.

Волк said:
You're half right. But that also makes you half wrong. I'm a computer tech, so I'm familiar with the fact that running something in an emulated environment isn't the exact same thing as running in a real environment. You're running a virtual machine, it's an emulation, not the real thing, programs don't always work the same under emulation versus the real world (for lack of a better term). If this is that big of a deal to you, go find a place, such as a copy shop, where you can run the necessary software from inside XP, either that or set yourself up with a dual boot.
Click to expand...
Click to collapse
Everything other than flashing the KDZ works under the virtual machine without a hitch, including flashing CWM with the nVidia updater. The problem is with the KDZ file. My phone is detected, no problem, APX drivers installed, the works. I'm not going to type out all the messages that flew by, the process starts but eventually stops. Not a good sign.
Oh, and BTW, I've been working in the IT industry for over 25 years, so I think I have a pretty good understanding what will work or not in a virtualized environment VS native OS, so spare me the condescension.

GenghisKhan67 said:
Everything other than flashing the KDZ works under the virtual machine without a hitch, including flashing CWM with the nVidia updater. The problem is with the KDZ file.
Oh, and BTW, I've been working in the IT industry for over 25 years, so I think I have a pretty good understanding what will work or not in a virutalized environment VS native OS, so spare me the condescending tone.
Click to expand...
Click to collapse
But I spare so few the condescending tone. Especially know-it-alls. So, please, spare the rest of us yours and we'll call it even on that.
I really don't care how long you've been in the industry and the IT industry covers a lot so for all we know you could be a networking guru who knows crap about fixing computers but knows networking inside and out.
And if a program absolutely has to be run in XP it sounds more like a failing in the program since most programs have worked better on Windows 7 than they did on XP. But this thread isn't about that.

Волк said:
I really don't care how long you've been in the industry and the IT industry covers a lot so for all we know you could be a networking guru who knows crap about fixing computers but knows networking inside and out. /QUOTE]
So why did you bring it up in the first place? If you know so much about this, how about helping us test this out instead of whining? You're not being helpful at all.
Click to expand...
Click to collapse

Isn't it ironic that the LG drivers and KDZ update work well in Windows running virtually on a Mac?

Core Memory said:
Isn't it ironic that the LG drivers and KDZ update work well in Windows running virtually on a Mac?
Click to expand...
Click to collapse
If it does, that's great. I guess this means we should expect a download link from you shortly?

Since that thread on how to unbrick many moons ago -- People reported that they did in fact get things working in Win7/Vista; It just had a lot lower success rate. People also got it going in XP mode / Virtual environments. So an actual XP machine isn't 100% necessary, it was just the most successful method.

speedsk8x said:
Since that thread on how to unbrick many moons ago -- People reported that they did in fact get things working in Win7/Vista; It just had a lot lower success rate. People also got it going in XP mode / Virtual environments. So an actual XP machine isn't 100% necessary, it was just the most successful method.
Click to expand...
Click to collapse
I was just gonna say, I updated my phone to the July 15 baseband using 64-bit Win 7 using this guide:
http://forum.xda-developers.com/showthread.php?t=1332350
I don't think XP is required at all, it's just a false myth, most people's issues stem from the fact that you need to have a stock ROM for a KDZ file to flash properly (IE you can't update your baseband/flash a .kdz with CM7 installed).
You'd need to follow a guide this like:
http://forum.xda-developers.com/showthread.php?t=1048274
to flash back to a stock Froyo or Gingerbread ROM, and probably use NVFlash to put stock recovery back on too.
... Perhaps in the future instead of bragging to each other about how much IT experience you have just find a solution to the problem and post that instead...

[Q] Tried to save nearly dead G2x,ended up with WIND V11h, what now?

I tried to update my G2x yesterday via the LG updater tool. Long story short, it froze on the S/W Updating screen and neither T-Mo or LG support could assist in getting it fixed.
I read that it was pretty hard to brick the G2x so I decided to give it an all out effort to resurrect it, especially after the T-Mobile tier two tech support told me there was nothing that could be done, if what he had tried didn't work, the phone was toast. I am just a woman who is more technical than the average woman my age, but I don't mod my phones much in general. I tweak.
I will list what all I have tried, as much in order as I can recall since starting this Friday at noon, don't laugh! (oh the phone is currently working, only 3g and with this Wind ancient looking version)
Flashed CWM on phone (tried all versions at some point in the process)
Totally cleared phone
Tried KDZ_FW_UPD_EN.exe to flash V21E_00 and V21Y_00 Neither would work
Flashed Cyanogenmod 7.1.0.1 Worked, looked beautiful, wifi but no cell service, no baseband, no IMEI
Flashed kdz WIND V11h - everything working but only at 3g
I thought if I got back to something that would put back in a baseband and my IMEI, I could find my way back to the most current update. I can't seem to flash anything new though.
I've tried this :http://forum.xda-developers.com/newthread.php?do=newthread&f=1149
and this : http://forum.xda-developers.com/showthread.php?p=25321356
Both awesome and helpful posts but I can't get anything other than this V11h!!
Help! And thanks! And I am sorry if this seems ridiculously easy, I think my brain quit working about 6 hours ago!
Oh, my question is, how do I go about getting it at least back to where it was? (Never updated from stock, March of 2011)
Model Number
LG-P999
Android version
2.2.2
Baseband version
M6600A-SCAUTNZ-2.0.9720T 1[JUN 05
2011 04:00:00] MP:TRULGE_08.09.02R_MDM
Kernel version
2.6.32.9
Build number
FRG83G
Software Version
LG-P999-AWC-V11h

I'm by no means an expert -- an advanced amateur, maybe -- but I'll do my best.
What exactly were you trying to update when you bricked the phone? You said you were using the LG updater tool, but what exactly were you trying to do? Was your phone already rooted prior to the attempted update? Had you made any modifications to your phone or were you running stock? That may help us get to the root of your problem.
Are you still able to get into the S/W update screen using the directions in the PDF you attached? (Ie: if you remove the battery, hold both volume buttons, and then plug in the USB, does your phone turn on and go into software update mode?) If you can get it into this mode, you should be able to flash the stock TMobile ROM using NVFlasher as in this thread:
http://forum.xda-developers.com/showthread.php?t=1056847
This may get you back to step one, and you can try again. Or maybe at that point, someone more knowledgeable will come around with better advice.
Good luck.

Thanks for your quick reply!
I was trying to uh...update to 2.3.4 Gingerbread to hopefully help resolve some minor but longstanding issues I had had with my phone. Mainly, the random reboot and powering off I was really getting sick of.
My phone was not rooted prior to this. I was running stock.
Yes, I can still get into the S/W updater screen following the instructions in the .pdf I posted.
And funny you should post this thread: http://forum.xda-developers.com/show....php?t=1056847
That is where I originally started when my phone first froze. I have tried to flash to stock using the NV flasher right before I posted the original question. It didn't do a thing and that's when I threw my hands up and decided I needed help!

Rudds1972 said:
That is where I originally started when my phone first froze. I have tried to flash to stock using the NV flasher right before I posted the original question. It didn't do a thing and that's when I threw my hands up and decided I needed help!
Click to expand...
Click to collapse
heh... I can totally relate to throwing your hands up. I just started tinkering with my phone a couple of months ago, and the first night, I spent from 10:00pm until about 5:00am just trying to get Cyanogenmod installed. It was frustrating, but after a lot of reading and re-trying, I finally got it to work.
Okay, when you run NVFlasher, do you get any messages at all? Once you click one of the buttons to flash the phone, I believe a DOS window should popup showing you the status of the flash, whether there are errors while flashing or if it completed successfully. If there are errors, be sure you have the proper APX driver installed, which should be included with the NVFlasher package. What OS are you using on your PC? Windows XP? 7? When you have the phone plugged into the USB and the S/W update screen is showing, you should see "'NVIDIA USB Boot-recovery" listed in your windows device manager.

lol...10pm to 5am eh? Sounds like me, I was (sounds crazy) noon Friday until 2am Sat and started up again around 9am and well...here I sit at 3 am my time, with a few breaks thrown in!
When I run NV flasher, it all goes smoothly. It looks totally complete, no errors. And I am familiar with the errors, the first few hours I had nothing but errors and dead ends. I have the proper APX driver for sure, I thankfully, run XP on this computer. And yes to the "'NVIDIA USB Boot-recovery" listed in your windows device manager. "
Scratching your head like me? I don't want to do Cyanogenmod again, which is what I am tempted to do, thinking now that I have the baseband back, the cell phone service would work. I really just want my phone back the way it was, albeit, updated..ok, so not exactly the way it was!

Currently on phone, so no links. But in other lg device forum on xda there is the "offline updater method" of kdz flashing. It tricks lg updater into using a custom kdz and not to check online. Look for v21y.kdz and use that. Its 2.3.4.

If you can get it working with the old wind mobile rom all you have to do is use the official lg tool from their website and it will update to the latest version for you I had the same problems you are talking about and the only thing I could get to work was the lg offline update tool and flashing the old wind mobile rom after i got that working just went to lg and used their program and it updated me to new baseband an 2.3.4.

http://forum.xda-developers.com/showthread.php?p=25116859
This is what you will have to do. It took me a while to figure it out. But when you have the programs and files you need all downloaded and setup it works without being online. It worked for me once I figured it out. I had to read it a few times and do some searching for all the files but they are out there. If you do not find them via this site Google it. Good luck.
Sent from my LG-P999 using xda premium

Done! Thank you all!!

Rudds1972 said:
Done! Thank you all!!
Click to expand...
Click to collapse
Awesome! What finally worked for you?

Hmmm...can I even remember?? My brain is still swimming in downloads and error messages!
I had tried the offline updater earlier, but the "Automatic Offline Procedure.vbs" file never would load, I kept getting an error on line 25. I downloaded it all again from other links, and this time I thought it would go through but I kept getting an error at line 70 something.
I finally read "instruction.docx" (the steps that the vbs file was going to have me follow) lol
I turned the windows enabler to the ON position.
I also disabled my LG modem first as I had read that on the .pdf file I posted earlier and it had allowed me to get Wind on there.
I disabled my firewall and anti virus temporarily also.
I opened the UpTestEX_mod2_marwin.exe set it to "3GQCT" and "EMERGENCY" and chose the V21y kdz
I hit "Normal web upgrade test"
Then start upgrade or something and the LG updater tool opened, it found my phone, I think I pressed Start upgrade or whatever again, waited, held my breath too long, passed out, woke up VOILA! DONE!
That is a VERY rough translation of what I did, I have had so many trial and error attempts and variations of settings, files etc, that I don't know what really finally worked! But thank you for your encouragement last night, because I was really about to give up for good (thus the last ditch "when all else fails ASK for help" post) and throw not only my hands up, but the phone across the room!
Now I am finally getting around to re loading my apps and all my settings, ringtones, etc etc etc. I don't know if I now love or hate my G2x!
Thanks to everyone for their replies! And everyone else who posts here and helps so many novices like me!

Glad to hear your back up and running.
Sent from my LG-P999 using xda premium

No Luck
I have literally tried everything I could possibly think of to get v11h updated to v21e or even v21y and nothing is working for me. I am stuck at the part where the phone begins to update, but disconnects at param(5) and then fails after that. I have tried every method and tutorial that I could find and I am still searching. Any help would be most appreciated. Thanks!

Zachariah_Apo said:
I have literally tried everything I could possibly think of to get v11h updated to v21e or even v21y and nothing is working for me. I am stuck at the part where the phone begins to update, but disconnects at param(5) and then fails after that. I have tried every method and tutorial that I could find and I am still searching. Any help would be most appreciated. Thanks!
Click to expand...
Click to collapse
Go to my post and follow the instructions:
http://forum.xda-developers.com/showthread.php?t=1601918

I haven't tried it yet but as soon as I do I'll reply back and tell you the results thank you.
On a side note I got tired of the g2x plague and bought a new phone hahaha I still want to fix my g2x though...
Sent from my SAMSUNG-SGH-T989 using XDA

Does v21y work on wind mobile Canada? Having major connection issues and thinking I'll run the kdz method with v21y to see if that fixes things. Gonna do it tonight so if any kind soul sees this post and know the answer could you pm me please. A big thanks in advance

kylereid said:
Does v21y work on wind mobile Canada? Having major connection issues and thinking I'll run the kdz method with v21y to see if that fixes things. Gonna do it tonight so if any kind soul sees this post and know the answer could you pm me please. A big thanks in advance
Click to expand...
Click to collapse
It works. Running it now on wind.

tahahawa said:
It works. Running it now on wind.
Click to expand...
Click to collapse
Hello there I need your help Im with wind too and been trying all methods to upgrade to new basbabnd with no luck i dunno if its me or it is hard to do .. can you plz help I followed the instruction using the fake LG upgrade tool and dowloaded the V21Y . KDZ and tried to upgrade and never works
HELLLPPP lol

yoos1980 said:
Hello there I need your help Im with wind too and been trying all methods to upgrade to new basbabnd with no luck i dunno if its me or it is hard to do .. can you plz help I followed the instruction using the fake LG upgrade tool and dowloaded the V21Y . KDZ and tried to upgrade and never works
HELLLPPP lol
Click to expand...
Click to collapse
I ended up buying a new phone cause I couldn't figure it out. I've tried every method with no luck. The phone just doesn't want to take the update for whatever reason. Other G2x I've tried worked but for some reason not the one I own. Hahaha
Try these links see if you can figure something out. http://forum.xda-developers.com/showthread.php?t=1339272 http://forum.xda-developers.com/showthread.php?t=1619932
Sent from my SAMSUNG-SGH-T989 using xda premium

No luck installing the March 2012 baseband
Rudds1972 said:
Hmmm...can I even remember?? My brain is still swimming in downloads and error messages!
I had tried the offline updater earlier, but the "Automatic Offline Procedure.vbs" file never would load, I kept getting an error on line 25. I downloaded it all again from other links, and this time I thought it would go through but I kept getting an error at line 70 something.
I finally read "instruction.docx" (the steps that the vbs file was going to have me follow) lol
I turned the windows enabler to the ON position.
I also disabled my LG modem first as I had read that on the .pdf file I posted earlier and it had allowed me to get Wind on there.
I disabled my firewall and anti virus temporarily also.
I opened the UpTestEX_mod2_marwin.exe set it to "3GQCT" and "EMERGENCY" and chose the V21y kdz
I hit "Normal web upgrade test"
Then start upgrade or something and the LG updater tool opened, it found my phone, I think I pressed Start upgrade or whatever again, waited, held my breath too long, passed out, woke up VOILA! DONE!
....
Click to expand...
Click to collapse
What does "disabling the LG modem" mean?
I have a Wind P999 phone with the V11h base band. Of course, the LG updater tool says that I have the latest baseband.
I tried updating using the KDZ tool but that did not work. for me.
I tried pushing a T-mobile Stock Rom too. It did not updated the baseband. LG tool still says I have the latest update.
I have also tried the hack of using the LG Updated with a local shttp server. But even then, when I pressed the "Normal web upgrade test" and "Start update" nothing happens.
Am I supposed to get some feedback while the upgrade happens? How long does this process take?
I am using Window 7 Ultimate 64-bit. All antivirus disabled.
Anything else I could try?
BTW, I have been able to revive a bricked p999 T-Mobile phone that I got from Ebay. it has the stock T-MObile Rom with the March 2012 baseband and software version v21y. This Wind phone is just testing me

[Q] Can't update to 4.2 at all. Please help?

I've been browsing these forums all night and I for the life of me cannot just find a simple answer. This update came out a while ago and I had no idea about it, so hopefully someone can help me.
Literally, all I'm trying to do is upgrade to 4.2. I've never done anything at all to my phone, it's always been stock. I'm looking for help because the OTA won't work at all, it said I was on 4.1, so it checked for updates and downloaded like a 400mb file, and it turns back on and I'm still at 4.1??
I went to HTC's site and saw that I could just manually install it, but of course it's never that easy. I did all the steps exactly, but when it starts to download and gets to the black HTC screen, my computer always says it doesn't recognize it and can't install drivers (error 170), and then it fails to update. I've tried this on both machines that run windows 8.1. I feel like I've tried everything..I tried running it in different compatibility modes, run as admin, and then I read somewhere that you update it when you're on the fastboot screen. So I tried that but when I'm in the bootloader my computer doesn't recognize my phone at all.
I'm stuck on what to do at this point. I can borrow a computer that has windows 7 on it, if that would help at all. Any help is appreciated!

Not enough info. What carrier version is the device? What region/country are you in? What is your current software number (not Android version).
When you say "manually" update, I think you are talking about RUU. What is the RUU version (file name)?
WIndows 8.1 is probably your main issue with the RUU. Win 8.1 is not compatible with HTC drivers. Anything before 8.1 should work. But again, you need to provide more info.

Hey man thanks a bunch! I should've provided more info, although I just tried it using a windows 7 laptop and it worked with no issues thanks!

[Q] in need of dire help. please read

OK so I have the z3. Cool phone I might add. I use my hotspot A lot but after upgrading to 5.0.2 foolishly. I cannot use my data connection externally. Is there a a way to downgrade to 4.4.4 or b. A way to upgrade to a later version of android where this big may be fixed. I really need the hotspot to work as its my life line. I'd like to keep it stock for now if possible too. Thanks Guys

benjy105 said:
OK so I have the z3. Cool phone I might add. I use my hotspot A lot but after upgrading to 5.0.2 foolishly. I cannot use my data connection externally. Is there a a way to downgrade to 4.4.4 or b. A way to upgrade to a later version of android where this big may be fixed. I really need the hotspot to work as its my life line. I'd like to keep it stock for now if possible too. Thanks Guys
Click to expand...
Click to collapse
(I think you meant "in dire need of help" unless you're specifically looking for low quality answers )
Downgrade using xperifirm to get the rom, and flashtool to install it, using this guide (note: you'll have to choose a different rom to the one mentioned in that guide):
http://www.xperiablog.net/2015/03/1...peria-lollipop-using-xperifirm-and-flashtool/

OK that's great. What is xperifirm in regards to.the importance of getting the room. I have downloaded 4.4.4 from.another source before I started this thread. Will I not be able to.use thaT? What I mean is is it significant to the process??

benjy105 said:
OK that's great. What is xperifirm in regards to.the importance of getting the room. I have downloaded 4.4.4 from.another source before I started this thread. Will I not be able to.use thaT? What I mean is is it significant to the process??
Click to expand...
Click to collapse
No, nothing special about xperifirm; It's just the only place i've ever got a rom from so i know it's legit. as long as flashtool likes your 4.4.4 it should be fine.

So I've coklme across a new problem. When installing the flash program I tried the windows key and r and typed in the stuff needed but I'm not getting what it says on the instructions. Therefor unable to install allbthe drivers. Running Windows 8.1.
I'm lost nnow. Could it be zipped with the drivers pre installed?

benjy105 said:
So I've coklme across a new problem. When installing the flash program I tried the windows key and r and typed in the stuff needed but I'm not getting what it says on the instructions. Therefor unable to install allbthe drivers. Running Windows 8.1.
I'm lost nnow. Could it be zipped with the drivers pre installed?
Click to expand...
Click to collapse
Probably need to put a little more detail about what you expect to happen and what's actually happening. (I used windows 7 and it installed without problem, but I think I read that windows 8 required a little more love to get the drivers installed. )

Webern said:
Probably need to put a little more detail about what you expect to happen and what's actually happening. (I used windows 7 and it installed without problem, but I think I read that windows 8 required a little more love to get the drivers installed. )
Click to expand...
Click to collapse
First off it wouldn't download and install all the drivers. So I installed the Sony companion and then when I went to flash the tft file it said unable to extract.ini or such. May just be a bad roM. I'm not at the computer now but I'll try again tomorrow

benjy105 said:
First off it wouldn't download and install all the drivers. So I installed the Sony companion and then when I went to flash the tft file it said unable to extract.ini or such. May just be a bad roM. I'm not at the computer now but I'll try again tomorrow
Click to expand...
Click to collapse
You have installed the wrong program, Install flashtool from flashtool.net and flash the FTF (not tft) using that
The sony flashtool only works on unlocked bootloader phones, but the original developed here on XDA is far better and works on locked bootloaders as well.

It was an ftf file it just blooming autocorrected. Right I'm going to try again and I'll take shots too