Hey Guys!
I've accidently rebooted the phone while on TWRP after full wipe without instaling new rom. Now it won't pass the initial screen (htc quietly briliant), or get into the TWRP mode.
What can I do?
I just had instaled the King Kang rom...
manually boot into bootloader. volume down + power. then "fastboot flash boot boot.img" the boot.img for the rom you want to flash. then boot into recovery from bootloader.
brunomcf said:
Hey Guys!
I've accidently rebooted the phone while on TWRP after full wipe without instaling new rom. Now it won't pass the initial screen (htc quietly briliant), or get into the TWRP mode.
What can I do?
I just had instaled the King Kang rom...
Click to expand...
Click to collapse
Hold power button and volume down until the phone turns off
release power but not volume down.
This will eventually load you into hboot, from there you can access TWRP.
You forgot to flash the boot.img didn't you?
Thanks for the help guys!
Trying to flash King Kang again. That's the only one I have in my internal memory.
Probably not the best option as it got stuck on the initiating swagger...
How long does it take to pass this screen? Lost my patient after 5 minutes and I've restarted it...
What rom do u guys suggest? I just want sth simple and easy to use...
remember to flash boot.img in fastboot
DvineLord said:
remember to flash boot.img in fastboot
Click to expand...
Click to collapse
What's that for? Already instaled the rom, and it hasn't gone throw the "initialization swagger"...
brunomcf said:
What's that for? Already instaled the rom, and it hasn't gone throw the "initialization swagger"...
Click to expand...
Click to collapse
its the kernel.
you are at a boot loop cause its not installed
DvineLord said:
remember to flash boot.img in fastboot
Click to expand...
Click to collapse
what was that about creating an irc channel ? lol
Hasoon AIO kit won't recognize my device. How can I flash the kernel then?
btw: it says ***Tampered*** on top of unlocked on fastboot
brunomcf said:
Hasoon AIO kit won't recognize my device. How can I flash the kernel then?
btw: it says ***Tampered*** on top of unlocked on fastboot
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1963896
Ok guys. Problem solved! Thanks all of you from the other side of the Atlantic!
HELP!!
mirGantrophy said:
Hold power button and volume down until the phone turns off
release power but not volume down.
This will eventually load you into hboot, from there you can access TWRP.
You forgot to flash the boot.img didn't you?
Click to expand...
Click to collapse
I clean installed a ROM, but it stays stuck in boot up animation. So I headed your advice.. But its not working. All I can do is start Odin mode and watch my boot up animation run. Over and over.
I can't find a work around so I can get back to TWRP and go back to a rom that offers at least more than a boot up animation
Any ideas?
h_ray_a said:
I clean installed a ROM, but it stays stuck in boot up animation. So I headed your advice.. But its not working. All I can do is start Odin mode and watch my boot up animation run. Over and over.
I can't find a work around so I can get back to TWRP and go back to a rom that offers at least more than a boot up animation
Any ideas?
Click to expand...
Click to collapse
step 1. Boot into Bootloader Power+volume down
step 2. go to pc and flash recovery again with fastboot. fastboot flash recovery.img (make sure its in your adb folder)
step 3. while still in fastboot type: fastboot reboot recovery
step 4. Grab a beer, your back in recovery. flash away (and remember to flash boot.img via fastboot or you will boot loop if on hboot 1.14 and up
h_ray_a said:
All I can do is start Odin mode and watch my boot up animation run.
Click to expand...
Click to collapse
Odin mode???
Do you have a Samsung phone? This forum is for the HTC One X/XL.
use hasoon toolkit and put radio in folder then flash via fastboot
Related
Hi i have problem with running recovery menu , its just stuck on htc logo with that red warning and at the bottom entering recovery , i need to root my phone , i unlocked bootloader. What am i doing wrong?
You can try pressing VOL UP + POWER.
Have you flashed recovery?
I cant even go into bootloader menu , i can get there through reset with ADB (command line).I unlocked bootloader and flashed recovery.twice with clockmod.
z00m0 said:
I cant even go into bootloader menu , i can get there through reset with ADB (command line).I unlocked bootloader and flashed recovery.twice with clockmod.
Click to expand...
Click to collapse
Try to flash this one, it's a special version. For some reason it's the only one that sticks when doing it the first time. After you can load into it then you can flash any other recovery you'd like.
http://loadbalancing.modaco.com/download.php?file=r2-modaco-recovery-clockwork-touch-ville.img
still same reaction (
z00m0 said:
still same reaction (
Click to expand...
Click to collapse
So you boot into bootloader
fastboot flash recovery r2-modaco-recovery-clockwork-touch-ville.img
then you still can't get into recovery?
Yes i did that , it doesnt work , dont know what can be the reason of this behavior
z00m0 said:
Yes i did that , it doesnt work , dont know what can be the reason of this behavior
Click to expand...
Click to collapse
On the phone can you see it writing the recovery? It's the little vertical bar on the top right of the phone.
How are you trying to get to recovery?
It stucks on the HTC logo with that red warning , im trying to get there through bootloader.
z00m0 said:
It stucks on the HTC logo with that red warning , im trying to get there through bootloader.
Click to expand...
Click to collapse
Red warning should be mean you're bootloader is unlocked so why you can't flash recovery I don't know.
I'd wipe the recovery on my phone and try to tinker with my phone but can't tonight. It might be time to for you to run a RUU.
Try flashing a ROM and boot.img in fastboot, the command is the following.
fastboot flash zip nameofROM.zip
Then
fastboot flash boot boot.img
Once it finishes, try booting into the ROM. If it works, try flashing the recovery again.
Sent from my HTC One S using Tapatalk 2
I can't enter to bootloader with buttons only through ADB , And about flashing ROM im afraid about bootloop ,im not having recouvery so it will brick my phone , why do i should flash boot.img and where i can find apropriate to my phone.
z00m0 said:
I can't enter to bootloader with buttons only through ADB , And about flashing ROM im afraid about bootloop ,im not having recouvery so it will brick my phone , why do i should flash boot.img and where i can find apropriate to my phone.
Click to expand...
Click to collapse
You won't go into a bootloop unless you don't flash the boot.img!
If you don't want to listen to my advice, you can wait there like that.
I'm on 2.20, was trying to get to CM10.1. Following instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=1952076
Got to this point: "If you have the newer HBOOT 1.14 (you probably do if coming from stock 2.20), boot.img's will have to be flashed separately via fastboot. Extract the boot.img from you ROM zip of choice and put it in the same directory as fastboot. Reboot your device into boot loader and run "'fastboot flash boot boot.img' (no quotes)
You can then flash the ROM and gapps via recovery and reboot and enjoy."
I followed hasoon2000's advice that his all-in-one tool could flash boot.img for me. I grabbed boot.img from the cm zip, followed instructions to flash boot.img, all appeared good, however now I can't get to TWRP to flash CM. No matter what I do, when the phone boots to the screen with the red text, sits there for a while, and boot loops. The all-in-one tool can no longer detect any device connected to my computer. Any great advice out there or am I toast?
GabbleRatchet said:
I'm on 2.20, was trying to get to CM10.1. Following instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=1952076
Got to this point: "If you have the newer HBOOT 1.14 (you probably do if coming from stock 2.20), boot.img's will have to be flashed separately via fastboot. Extract the boot.img from you ROM zip of choice and put it in the same directory as fastboot. Reboot your device into boot loader and run "'fastboot flash boot boot.img' (no quotes)
You can then flash the ROM and gapps via recovery and reboot and enjoy."
I followed hasoon2000's advice that his all-in-one tool could flash boot.img for me. I grabbed boot.img from the cm zip, followed instructions to flash boot.img, all appeared good, however now I can't get to TWRP to flash CM. No matter what I do, when the phone boots to the screen with the red text, sits there for a while, and boot loops. The all-in-one tool can no longer detect any device connected to my computer. Any great advice out there or am I toast?
Click to expand...
Click to collapse
Did you flash the zip file also or just the boot image?
AT&T HTC OneX
Android 4.1.1
ViperXL
Venomtester said:
Did you flash the zip file also or just the boot image?
AT&T HTC OneX
Android 4.1.1
ViperXL
Click to expand...
Click to collapse
I cant get into recovery to flash the zip
Turn on, hold power 10-15 seconds, until screen goes black, let off, press n hold volume down, press power just 2-3 seconds, let off power button but continue holding vol. Down
Remember to do a faxtory reset before flashing the zip
a box of kittens said:
Turn on, hold power 10-15 seconds, until screen goes black, let off, press n hold volume down, press power just 2-3 seconds, let off power button but continue holding vol. Down
Remember to do a faxtory reset before flashing the zip
Click to expand...
Click to collapse
Fantastic. I knew there had to be a key sequence somewhere. Thanks a million!
I'm assuming you've already tried "fastboot reboot bootloader" or "fastboot reboot recovery"?
ADB commands won't work right now for you I don't think
KitWasHere said:
I'm assuming you've already tried "fastboot reboot bootloader" or "fastboot reboot recovery"?
ADB commands won't work right now for you I don't think
Click to expand...
Click to collapse
....? He would need to be in Fastboot mode from bootloader and I'd he was in bootloader he would not have posted here and no adb wouldn't work...neither would Fastboot if I was in a bootloop
Use this to flash boot.imgs cool tool
http://forum.xda-developers.com/showthread.php?t=1962428
sent from my HTC One X
Unlocked & rooted 2.20 bounty baby
Sweet potatoe pie
If you can get into download mode, use odin and reflash back to stock
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
MRxxEGO said:
If you can get into download mode, use odin and reflash back to stock
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Lol don't encourage him to use Odin for an HTC device .. this isn't samsung it's not supported on htc!!!!
Lol true true true
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
no access to recovery
I've got big problem. My One Mini is fine until I try to go into recovery. It refuses to go there.
I get fastboot and bootloader menus fine. It enters bootloader, but if I try to go into recovery, it just goes back to the main bootloader menu.
The problem started when I flashed CWMRecovery. Fastboot and adb recognise my phone, and accept commands, but when I try to fastboot flash recovery in it sends an error message. File not found.
I tried " fastboot boot recovery.img" but that just froze the machine .
When I try to get into recovery from rom manager or ROM toolbox pro, it takes me to the fastboot menu, not into recovery, and we're back to square one, as above.
Running android 4.3 Sense 5.5 software 2.12.401.1 Supercid 11111111
rooted and unlocked
To get the phone to work again, I have to hold power down for about 10 secs direct from fastboot/bootloader...may have to do this several times before it boots into Android.
If I turn power off from bootloader, it returns to bootloader when I power up again.
If I don't turn the phone off, once in main application, it's all OK.
Ho hum.
As I say , it works like a dream until I want to go into recovery.
Any ideas, please?
Thanks
Hi
Boblud said:
I tried " fastboot boot recovery.img" but that just froze the machine .
Click to expand...
Click to collapse
The correct command to flash the recovery is
Code:
fastboot flash recovery your_recovery_image.img
see also: wiki.cyanogenmod.org/w/Doc:_fastboot_intro
Booting into recovery should be possible with
Code:
adb reboot recovery
I didnt tried CWM on the Mini, but used it on my old Marvel. I'm satisfied with TWRP for the Mini.
greetings
Yes, thanks. I know the commands should work...but that's the trouble..they don't!
I can get into the recovery menu...HBOOT /FASTBOOT / RECOVERY and so on, but selecting "RECOVERY" simply sends me back to HBOOT menu.
I can't flash anything under FASTBOOT, either. I've been doing this sort of thing for several years without trouble....until now!
So come on chaps..thinking caps on , please.
Boblud said:
Yes, thanks. I know the commands should work...but that's the trouble..they don't!
I can get into the recovery menu...HBOOT /FASTBOOT / RECOVERY and so on, but selecting "RECOVERY" simply sends me back to HBOOT menu.
I can't flash anything under FASTBOOT, either. I've been doing this sort of thing for several years without trouble....until now!
So come on chaps..thinking caps on , please.
Click to expand...
Click to collapse
lock the bootloader RUU back to stock and start over ?
clsA said:
lock the bootloader RUU back to stock and start over ?
Click to expand...
Click to collapse
Thanks, will do when I can find ruu to download! Any pointers, please?
Uhm.... have u read Frequently Asked Questions by @KidCarter93 ?
KidCarter93 said:
[SIZE=+1]Q11: I have a custom recovery installed but I can't boot into it.[/SIZE]
Use the command - fastboot erase cache.
You should now be able to boot into recovery.
Click to expand...
Click to collapse
Maybe it helps.
Boblud said:
Thanks, will do when I can find ruu to download! Any pointers, please?
Click to expand...
Click to collapse
here's the RUU
http://www.androidruu.com/getdownlo...14_10.20.40.4408L_release_333483_signed_2.exe
clsA said:
here's the RUU
http://www.androidruu.com/getdownlo...14_10.20.40.4408L_release_333483_signed_2.exe
Click to expand...
Click to collapse
Thanks for help all round.
The RUU wouldn't run: it reported an unknown error, but having done so, it must have done something, as when I rebooted, I had access to recovery once again...briefly! Then it went again.
Anyway, I re locked / unlocked , locked a few times, and hey presto, it's sprung back into life!
Hello,
I have recived the OTA today and I flashed it and now I dont have a custom recovery and root. What steps do I need to take to get those things back? I have tried to use this guide https://forums.oneplus.net/threads/...oader-install-custom-recovery-and-root.64487/ but after flashing recovery.img through ADB I still have normal CM recovery.
Go to Developer Options in Settings and disable the "update CM recovery" option.
Transmitted via Bacon
It has been disabled the whole time
Ok. So you say you're flashing the recovery through adb but that's impossible so I'm assuming you're flashing with fastboot, right?
Transmitted via Bacon
I'm not really good in those names.. I have isnerted a screenshot from this program.
xamilek555 said:
I'm not really good in those names.. [emoji14] I have isnerted a screenshot from this program.
Click to expand...
Click to collapse
Looks ok. Where are you getting the recovery from? Did you rename it to "recovery.img" for a reason?
Transmitted via Bacon
I've got that file from TWRP website and I renamed it to recovery.img. I have succesfully booted into this recovery with a command "fastboot boot recovery.img" which allowed me to flash root and xposed form it but after rebooting the phone the old recovery remains...
I have the same problem. Flash TWRP says it's flashed OK, but when I reboot to recovery it's still stock.
Linnyuk said:
I have the same problem. Flash TWRP says it's flashed OK, but when I reboot to recovery it's still stock.
Click to expand...
Click to collapse
Try updating the Android SDK. That's what worked for me. ?
Sent from my A0001 using Xparent BlueTapatalk 2
I've downloaded fresh verison today so it isnt the solution in my case :/
Somebody gave me this solution and it worked!
fastboot erase recovery
fastboot reboot-bootloader
fastboot flash recovery recovery.img
xamilek555 said:
I've downloaded fresh verison today so it isnt the solution in my case :/
Somebody gave me this solution and it worked!
fastboot erase recovery
fastboot reboot-bootloader
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Same situation here...this solution isn't working for me, same problem, always Cyanogen based recovery...
After flashing new recovery, when you go to reboot, hold down Vol-Down and Power before it boots into the OS and it should load the new recovery. Had this problem myself earlier today, if you let it boot to the OS, it flashes back the CM recovery.
mozyman said:
After flashing new recovery, when you go to reboot, hold down Vol-Down and Power before it boots into the OS and it should load the new recovery. Had this problem myself earlier today, if you let it boot to the OS, it flashes back the CM recovery.
Click to expand...
Click to collapse
It works! I think it because of the dev settings into CM12S which force the recovery to be CM12S' one.
Thanks
Messatsu said:
It works! I think it because of the dev settings into CM12S which force the recovery to be CM12S' one.
Thanks
Click to expand...
Click to collapse
I'm having the same problem, can someone go over start to finish how they fixed this issue?
What worked for me
I previously had TWRP installed, wiped and did the C12S flash but didn't flash SuperSu before rebooting. This removed TWRP and brought me to Cynogen Recovery whenever going into recovery mode (Vol Dwn + Power). This also removed the root from my phone. To fix this took some digging and I came up with the following solutions as long as you had TWRP installed at one point. If not then unlock your boot loader and re install. I named my TWRP File Recovery just to keep things simple, but whatever your TWRP Filename is put that in at #5.
1) Enter Fastboot Mode (Vol Up + Power)
2) On your computer open command prompt (Ctrl R)
3) Plug your phone in
4) Type the following minus the quotes
"cd desktop/android-sdk-windows/platform-tools"
5) fastboot boot recovery.img
This will boot your TWRP, you can then go to flash your SuperSu file and you're done!
im having this issue too : /
mozyman said:
After flashing new recovery, when you go to reboot, hold down Vol-Down and Power before it boots into the OS and it should load the new recovery. Had this problem myself earlier today, if you let it boot to the OS, it flashes back the CM recovery.
Click to expand...
Click to collapse
I've tried so many things today, this is the only thing that worked. Thank You!
mozyman said:
After flashing new recovery, when you go to reboot, hold down Vol-Down and Power before it boots into the OS and it should load the new recovery. Had this problem myself earlier today, if you let it boot to the OS, it flashes back the CM recovery.
Click to expand...
Click to collapse
It works! I had the issue and this procedure solved it ! Thanks !!! :good::good::good:
Hi all,
I have just installed CM12s on my OPO and it was meant to install TWRP but each time i go into recovery to install SuperSU its still CM Recovery
1) Enter Fastboot Mode (Vol Up + Power)
2) On your computer open command prompt (Ctrl R)
3) Plug your phone in
4) Type the following minus the quotes
"cd desktop/android-sdk-windows/platform-tools"
5) fastboot boot recovery.img
Click to expand...
Click to collapse
I have done that and yey TWRP appeared and i Installed SuperUser but when i clicked on the app it said there was an issue with the binary, so i thought i would reboot into recovery and install it again...but CM recovery appeared again
Originally Posted by mozyman
After flashing new recovery, when you go to reboot, hold down Vol-Down and Power before it boots into the OS and it should load the new recovery. Had this problem myself earlier today, if you let it boot to the OS, it flashes back the CM recovery.
Click to expand...
Click to collapse
I thought i would give that a try but nothing seems to happen, the screen just goes black. Im reboting my OPO and when the white OPO logo appears im holding the buttons down....is this too soon or too late?
Originally Posted by xamilek555
I've downloaded fresh verison today so it isnt the solution in my case :/
Somebody gave me this solution and it worked!
fastboot erase recovery
fastboot reboot-bootloader
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
I have even attempted to do that but it doesnt seem to work....
Can someone help me out here....
After flashing new recovery, when you go to reboot, hold down Vol-Down and Power before it boots into the OS and it should load the new recovery. Had this problem myself earlier today, if you let it boot to the OS, it flashes back the CM recovery.
Click to expand...
Click to collapse
it works thank you...!!
I was trying to get the latest twrp '2.8.7.2'. I downloaded it and flashed the img to recovery and nothing seemed to happen so I tried flashing it to boot then I tried to reboot the system. Now when I try to turn it on I get stuck on the Google like it is turning but it just gets stuck. I tried Charging it now when I charge it I get stuck on the battery logo. When I try booting it Booting it into recovery(twrp) I get a black screen. I can tell the Screen is on because of the dim glow it gives off but it is not doing anything. Note: I am some what of a noob when it comes to this stuff, My nexus 5 was running Marshmallow, and I was running the Xtra smooth rom (it is very close to stock). Plz help. I have also just found out that the reason im getting the bootloop is I flashed the wrong version of TWRP need a fix PLZ HELP.
Did you try flashing stock recovery or twrp 2.8.7.1?
audit13 said:
Did you try flashing stock recovery or twrp 2.8.7.1?
Click to expand...
Click to collapse
I cant flash anything because it is stuck. If you can tell me how to do that it would be great. also I gave you the thanks thing.
Judah04 said:
I cant flash anything because it is stuck. If you can tell me how to do that it would be great. also I gave you the thanks thing.
Click to expand...
Click to collapse
All you have to do is boot into your bootloader (Power + Volume Up + Volume Down at the same time) and flash the stock recovery.
fastboot flash recovery recovery.img
Chances are you flashed an incorrect version of TWRP meant for another phone hence the boot loop.
asawoszc said:
All you have to do is boot into your bootloader (Power + Volume Up + Volume Down at the same time) and flash the stock recovery.
fastboot flash recovery recovery.img
Chances are you flashed an incorrect version of TWRP meant for another phone hence the boot loop.
Click to expand...
Click to collapse
When i boot into recovery mode the screen is on but it is black.
asawoszc said:
All you have to do is boot into your bootloader (Power + Volume Up + Volume Down at the same time) and flash the stock recovery.
fastboot flash recovery recovery.img
Chances are you flashed an incorrect version of TWRP meant for another phone hence the boot loop.
Click to expand...
Click to collapse
Also yes i do think I flashed the wrong TWRP. how do I flash the correct TWRP when I can't even get back into a tool to flash it?
Judah04 said:
When i boot into recovery mode the screen is on but it is black.
Click to expand...
Click to collapse
You dont need recovery, you need bootloader.
telep said:
You dont need recovery, you need bootloader.
Click to expand...
Click to collapse
Can you please explain to me exactly what to do. thank you. also my bootloader is unlocked. I also can get to fastboot so what is the diffrence between bootloader and fastboot.
Hold down the volume +, volume -, and power button. You'll be taken to a screen with the word START at the top. Now, connect the phone to your Windows computer using the USB cable, open a command prompt and type "fastboot flash recovery nameof twrpfile.img", press the enter key, use the volume button to select recovery, use the power button to enter recovery, press the power button, press volume + button, and you should enter TWRP.
Thank you but I do not own a windows computer
Then look up the respective commands. You flashed twrp over your kernel, you need to flash a proper boot.img (kernel) if you want the phone to boot. Fastboot is ran through bootloader. Flash the proper kernel in bootloader using fastboot.
wangdaning said:
Then look up the respective commands. You flashed twrp over your kernel, you need to flash a proper boot.img (kernel) if you want the phone to boot. Fastboot is ran through bootloader. Flash the proper kernel in bootloader using fastboot.
Click to expand...
Click to collapse
Thank you this sounds like it will work. But can you put it in more simple terms and give me links? plz. thx in advance.
Do you have access to a Windows computer to flash the commands? How did you flash TWRP?
audit13 said:
Do you have a computer?
Click to expand...
Click to collapse
I have a macbok air running mac os x 10.5.8.
audit13 said:
Do you have access to a Windows computer to flash the commands? How did you flash TWRP?
Click to expand...
Click to collapse
I flashed TWRP using the TWRP app it installed TWRP 2.8.7.1 I also unlocked the bootloader with a similar app.
This might help: http://forum.xda-developers.com/goo...olkit-root-twrp-recovery-unroot-11-6-t2515640
audit13 said:
This might help: http://forum.xda-developers.com/goo...olkit-root-twrp-recovery-unroot-11-6-t2515640
Click to expand...
Click to collapse
Just cheked it out I tried it and it didn't work but thx anyway. btw I am running android 6.0.
audit13 said:
This might help: http://forum.xda-developers.com/goo...olkit-root-twrp-recovery-unroot-11-6-t2515640
Click to expand...
Click to collapse
It might not have been working because I did not enable USB Debuging. :crying:
USB debugging is required for adb commands. With fastboot mode, debugging isn't necessary.
audit13 said:
USB debugging is required for adb commands. With fastboot mode, debugging isn't necessary.
Click to expand...
Click to collapse
Can you please walk me through this i am some what of a beginner when it comes to some of these things. I can try the tool kits agin but need help.