Hi, as the title says, I want to know which kernel should I choose for my tablet. I want the maximum autonomy, overclocking options and undervolting predisposition..of course I would have the maximum performance. Thank you.
texler93 said:
Hi, as the title says, I want to know which kernel should I choose for my tablet. I want the maximum autonomy, overclocking options and undervolting predisposition..of course I would have the maximum performance. Thank you.
Click to expand...
Click to collapse
the only option you have is the CMOC kernal for CM10....
kan_bleach said:
the only option you have is the CMOC kernal for CM10....
Click to expand...
Click to collapse
are u sure that this the best arent there any other kernels...esp for rooted ics deodexed rom
hilton24 said:
are u sure that this the best arent there any other kernels...esp for rooted ics deodexed rom
Click to expand...
Click to collapse
First off, it depends on your model number. Why not peruse the dev forums for your device--7" or 10"--first?
I would suggest to go for aokp rom as I have myself tested it. I I have overclocked my p3100 over 1420mhz without any problem. I but just a warning the more you overclock your tab will be heated up fast so just don't set the speed to set on boot. And a common thin the more you overclock you will get less battery life. Or else you set to go..
Sent from my GT-P3100 using Tapatalk 2
Related
Hi,
I am a new rooted user and have been following all MT4G threads here at XDA pretty closely. Can anyone help me know which kernels I can flash on the 03012011 Nightly(cm_glacier_full-11.zip ). I haven't ever flashed a kernel and I don't know what it does and how it helps.
I'll appreciate any info that you can give me.
dipsy1849 said:
Hi,
I am a new rooted user and have been following all MT4G threads here at XDA pretty closely. Can anyone help me know which kernels I can flash on the 03012011 Nightly(cm_glacier_full-11.zip ). I haven't ever flashed a kernel and I don't know what it does and how it helps.
I'll appreciate any info that you can give me.
Click to expand...
Click to collapse
Well you can use dumfuq's SmartCMKernel or Faux's CM7RC v1.3 kernels. ATM you might want to go with dumfuq's as its the most stable CM7 kernel other than default. You can find it in development section, once downloaded to SDCard just go in to Recovery and wipe cache, davlik and then Install zip from SDCard> Choose from SDCard> Select it wherever you put it and then flash it as you normally flash rom's. Then reboot and let it run for few min and let it do its thing.
BlackSHELF said:
Well you can use dumfuq's SmartCMKernel or Faux's CM7RC v1.3 kernels. ATM you might want to go with dumfuq's as its the most stable CM7 kernel other than default. You can find it in development section, once downloaded to SDCard just go in to Recovery and wipe cache, davlik and then Install zip from SDCard> Choose from SDCard> Select it wherever you put it and then flash it as you normally flash rom's. Then reboot and let it run for few min and let it do its thing.
Click to expand...
Click to collapse
Which is the dumfuq's kernel . I hear it reffered in threads but I cant seem to find it.
Thanks
dipsy1849 said:
Which is the dumfuq's kernel . I hear it reffered in threads but I cant seem to find it.
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=930961
Its very stable I virtually tested them all and this seem to be THE one, for now till Faux come down to CM7 world.
BlackSHELF said:
http://forum.xda-developers.com/showthread.php?t=930961
Its very stable I virtually tested them all and this seem to be THE one, for now till Faux come down to CM7 world.
Click to expand...
Click to collapse
Thanks for your help. Getting this kernel now. I heard about setcpu and Quadrant. Do I need those and how/what are they used for? what kind of difference would this kernel give me?
SetCPU - name explains it but if you don't know its controls clock frequency, so you can over/under clock and even set profiles.
Quadrant - benchmark app its just to brag how high score you got nothing special, don't let it get to your head it means nothing as the synthetic benchmark no way translate in to real world performance its just pissing contest lol
Keep in mind in CM7 you have built in mCPU performance controller to to handle clock frequency which you can access via Setting> CM Setting> Performance> CPU Setting.
BlackSHELF said:
SetCPU - name explains it but if you don't know its controls clock frequency, so you can over/under clock and even set profiles.
Quadrant - benchmark app its just to brag how high score you got nothing special, don't let it get to your head it means nothing as the synthetic benchmark no way translate in to real world performance its just pissing contest lol
Keep in mind in CM7 you have built in mCPU performance controller to to handle clock frequency which you can access via Setting> CM Setting> Performance> CPU Setting.
Click to expand...
Click to collapse
Thanks Blackshelf. I am on that kernel now. What should my min and max be? and should the set on boot be set to yes?
What is Linpack?
dipsy1849 said:
Thanks Blackshelf. I am on that kernel now. What should my min and max be? and should the set on boot be set to yes?
Click to expand...
Click to collapse
You do relize you allready have a aftermarket kernel installed when you download any Rom here in the forums, right? Its ok to install different ones but FYI you dont need to in order to overclock.
TrueBlue_Drew said:
You do relize you allready have a aftermarket kernel installed when you download any Rom here in the forums, right? Its ok to install different ones but FYI you dont need to in order to overclock.
Click to expand...
Click to collapse
not past 1504Mhz though...
dipsy1849 said:
Thanks Blackshelf. I am on that kernel now. What should my min and max be? and should the set on boot be set to yes?
Click to expand...
Click to collapse
Thats up to you as only you know what you use so you can better utilize the resource. I mean if you don't use anything no reason to OC it to 1.8ghz lol that way you will kill battery.
BlackSHELF said:
http://forum.xda-developers.com/showthread.php?t=930961
Its very stable I virtually tested them all and this seem to be THE one, for now till Faux come down to CM7 world.
Click to expand...
Click to collapse
What are the differences between dumfuq's and faux's? Is there an advantage to one over the other? I've always been using faux's the whole time.
I keep going back to just using the stock CM 7 kernel clocked at 1.5 honestly I think it gives the best overall performance (on my phone at least) and honestly I had issues running over anything past 1.7 with any kernel but again that could just be my phone. I had it oc'ed at 1.7 for a while and now I have it clocked at 1.5 and notice I have less FC (not that I had many at 1.7 but def more apps would choke from time to time) This phone is pretty fast bone dry stock with no oc'ing but it runs beautiful at 1.5. I dont really notice much performance difference from 1.5 to 1.7 but I do notice a battery difference
Sensation chip is not on the list of SetCpu 2.2.4 even though the post say yes.
Can't find MSM8X60. And I can't change the speed. Maximum is only up to 528MHz no longer 1.5GHz... Help!
OK, first off, this should be in q and a section. Second, did you select autodetect?? I use setcpu regularly and always use the autodetect option.
Sent from my Sensation using Tapatalk
Your kernel probably doesn't support it.
Which ROM/Kernel are you using?
BSAKSOUK said:
Your kernel probably doesn't support it
Click to expand...
Click to collapse
This.Most custom kernels in here work just fine.
BSAKSOUK said:
Your kernel probably doesn't support it.
Which ROM/Kernel are you using?
Click to expand...
Click to collapse
Yeah, you're most likely using a stock kernel that doesn't support over clocking and under clocking. Usually is the case when that happens with setcpu
jiggaman508 said:
OK, first off, this should be in q and a section. Second, did you select autodetect?? I use setcpu regularly and always use the autodetect option.
Sent from my Sensation using Tapatalk
Click to expand...
Click to collapse
Well, I'm using stock rom. There's no autodetect options for me to choose. If I want change back to normal frequency then how to do it?
BSAKSOUK said:
Your kernel probably doesn't support it.
Which ROM/Kernel are you using?
Click to expand...
Click to collapse
Hi, I'm using stock rom. I must use custom rom to use the setcpu app?
I'd recommend flashing a custom rom, as you get far more options to choose from - more freedom as well. If it truly does become clocked at 500ish Mhz, just uninstall SetCPU and you should be set.
eessel said:
Yeah, you're most likely using a stock kernel that doesn't support over clocking and under clocking. Usually is the case when that happens with setcpu
Click to expand...
Click to collapse
jiggaman508 said:
OK, first off, this should be in q and a section. Second, did you select autodetect?? I use setcpu regularly and always use the autodetect option.
Sent from my Sensation using Tapatalk
Click to expand...
Click to collapse
My Linux version is 2.6.35.13-gedc56fa([email protected])(gcc version 4.4.0). Looks like I'm in deep trouble now. About this post http://forum.xda-developers.com/showthread.php?t=1159206 how to push the kernel module to my device? Will this solve my problem?
the only way you will be able to overclock you're device is by rooting then flashing a custom kernel...
staymunch said:
the only way you will be able to overclock you're device is by rooting then flashing a custom kernel...
Click to expand...
Click to collapse
I have root but haven't flash any custom rom. Does stock rom need to flash?
How to Remove the CPU Speed limit of 600Mhz on Android 2.2, When I use Andoird 2.3 on this Device [Commtiva Z51], I am able to Clock the CPU at ~800Mhz, I want to do this on Android 2.2, I have a rooted Device.
Maybe a CPU Tuner
I am sure you can find a free one on Google Play you should take a look.
akshatcool12345 said:
How to Remove the CPU Speed limit of 600Mhz on Android 2.2, When I use Andoird 2.3 on this Device [Commtiva Z51], I am able to Clock the CPU at ~800Mhz, I want to do this on Android 2.2, I have a rooted Device.
Click to expand...
Click to collapse
What you are referring to is known as overclocking (oc)...in order to overclock, you need a custom kernel, since (mostly) the stock kernel doesnt support oc
...
[Fyi, Android 2.3 is better than 2.2 in a lot of ways...]
I.AM.H3RO said:
I am sure you can find a free one on Google Play you should take a look.
Click to expand...
Click to collapse
??? What are you trying to tell??
Typed using a small touchscreen
I already have No-frills CPU control from the play store and it works but not over 600Mhz and yes, it is Overclocking (OC), I am running a custom rom, Android 2.3 Roms are available but i am not using those as they drain the battery really fast (even without overclocking). It seams like it is a limitation with Android 2.2 as I have tried other Roms also and they too have the same problem.
No nothing like that...
Oc is kernel dependent...you can make an oc kernel for froyo also...
And if you oc, you will get faster battery drain, and maybe heat issues...
Typed using a small touchscreen
Overclocking
Currently I am using this Rom (Jellybean <link> slinkme.co.cc/jellybean <link> [Added like this as I cant add links now]) , As far as I know this supports overclocking. And also if this kernel does not support Overclocking, Can you give me a OC kernel for Android 2.2.1 (This Rom).
All devices are different, and so is their kernel/rom/etc....you cannot use stuff for my device on yours...
And jellybean is sypposed to be android 4.x/5...and not 2.2.1
Give me a screenshot of the stuff written in about phone...then maybe I can point you to the right direction...
Typed using a small touchscreen
Jellybean is my Rom name, it is Android 2.2.1, I want a Kernel that Supports OC, Do you have one ? Android Jellybean is 4.1.
My Device : http:~//~slinkme.co.cc/mydevice (Remove ~ for the link)
My Rom : http:~//~slinkme.co.cc/jellybean (Remove ~ for the link)
Not very original calling it jelly bean
Sent from my GT-S5360 using XDA
Firstly, I just don't blankly visit random websites...
And secondly, I asked for screenshot for about phone...
If you want help, you've got to LET ME HELP!
Or just plain get ignored...
Typed using a small touchscreen
Just flash an overclock kernel, then install setcpu and overclock
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
a.cid said:
Firstly, I just don't blankly visit random websites...
Click to expand...
Click to collapse
That (slinkme.co.cc) is just a URL Shortener Website like goo.gl.....
a.cid said:
And secondly, I asked for screenshot for about phone...
Click to expand...
Click to collapse
I have changed all that but you might need the kernel version so this is it...
Kernel Version: Apps_2.6.23.9
Crash_HF said:
Just flash an overclock kernel, then install setcpu and overclock
Click to expand...
Click to collapse
I know that, Can you give me kernel that supports Overclocking..
I already have setCPU, No-Frills CPU Control, Antutu CPU Master..
Can anybody help me please !!
Sent from my Z71 using xda premium
i think you can use Set CPU. you can find its on google play or appstore.vn/a
the easiest way...ask your rom developer to make a kernel with OC support. you can't compile a kernel for your device and neither me since I don't even know what your device is.
thanhhai8888 said:
i think you can use Set CPU. you can find its on google play or appstore.vn/a
Click to expand...
Click to collapse
I already have setCPU , No frills and antutu CPU master.
I need to flash a OC kernel to the device but I can't find one.
Sent from my Z71 using xda premium
akshatcool12345 said:
I already have setCPU , No frills and antutu CPU master.
I need to flash a OC kernel to the device but I can't find one.
Sent from my Z71 using xda premium
Click to expand...
Click to collapse
You really should listen to these guys & ease up on the attitude. YOU'RE the one needing help and they really are trying.
What kind of PHONE do you have & ROM are you running? THAT determines the kernel.
Be carefull,
It can damage your device...
Hello frends i am new to htc explore(not new to android).i am using stock indian rom with default kernel.i already rooted my rom.i want a kernel which work in stock rom and have NO bug and support ext partition and overclockable to more than 600mhz.thanks guys.
Welcome, there is no such kernel, mostly they are only 3 kernels for explorer, non of them works fine on stock rom, If you want stock, closest you can do is Ateeq's rom, then to clock it you have to flash yannou's kernel, which has OC but most of the guys sayed that it is fake OC, I think not but....... I'm a noob. So far what I figure out is cranium kernel, whit that you can clock it to 1307 which is fun for a while, but battery is just diyng with full clock. All of them supports ext partition.
Thanks.so cranium kernel work with stock Tom.
I have my doubts, anyway do a backup and try, I'm sure about yannou's and ateeq's they don't work with stock, when I tryed cranium, I've already forgot what stock was, so don't know but nowhere says that it wont, so it's up to you. My doubts are about stock, ti's odexed and that's why I'm not sure will it work corectly.
No kernels work with stock....only on custom roms..
my htc
Ok guys i want to install custom rom.plz suggest me a custom rom(ics based)?aokp or cm9?and what is the safe max frequency that we can overclock our phone?thanks
vikasb32 said:
Ok guys i want to install custom rom.plz suggest me a custom rom(ics based)?aokp or cm9?and what is the safe max frequency that we can overclock our phone?thanks
Click to expand...
Click to collapse
I personally recommend to try CM9, I've installed it yesterday and I can say there wasn't bugs(oh yeah, there was something, when I used phone in USB storage mode(plugged in to computer) Google Play wasn't working properly, it was force closing on the app startup. But this is nothing).
Ok thanks.can you tell me what is the max frequency which our phone can hold without any kernel panic.??
vikasb32 said:
Ok thanks.can you tell me what is the max frequency which our phone can hold without any kernel panic.??
Click to expand...
Click to collapse
Sorry, exactly now, I'm using default CM9 kernel, so I can't say that.
So default cm9 kernel is not overclockable?i assume that all custom rom have overclockable kernel?
vikasb32 said:
So default cm9 kernel is not overclockable?i assume that all custom rom have overclockable kernel?
Click to expand...
Click to collapse
I thought it too, but setCPU shows max clock 600Mhz.
zgintasz said:
I thought it too, but setCPU shows max clock 600Mhz.
Click to expand...
Click to collapse
Ok then its not overclockable.i will check.thanks
Oc is not a gud idea..du to hvy battery drain..cm9 with oc is available..but not a stable one...
my htc
I'm not sure if this kind of post is allowed so apologies in advanced. I'm wondering what rom/kernel has the best performance for the p5110.
TimeAndroid said:
I'm not sure if this kind of post is allowed so apologies in advanced. I'm wondering what rom/kernel has the best performance for the p5110.
Click to expand...
Click to collapse
IIRC Dahlmen kernel is the only one with overclock support, so You should go for that.
voroskoi said:
IIRC Dahlmen kernel is the only one with overclock support, so You should go for that.
Click to expand...
Click to collapse
Do you mean Dhollmen?
Yes