I have just upgraded my sgs2 GT-I9100 to jellybean 4.1.1 .. Now i am facing a problem...
i am not able to connect my phone to the pc... my jellybean rom is supernexus .... i tried reinstalling kies to latest version... but still the problem persists......what to do??
eh
switch roms or try to look inside the system and see why the laptop wont pick up the device ..also make sure you have the drivers installed
Related
Everything was fine till last nite but then I noticed that the phone is not showing in windows explorer nor kies is able to connect. I then restarted the computer but that did not solve the issue. The phone mtp shows connected but comp cpu goes up & remains 90-100% which means some driver is hogging the cpu.
What can be done to solve this issue, reinstalling is going to be a major headache as kies gave me hell lot of a time installing the driver on my win7 x64 system.
Connection choice is set to kies not on ask on connection.
Problem solved.
Took the battery out for few sec & then restarted connected to computer without any problems & now kies too working fine.
Firmware not upgrading through KIES
just wanted to know, were u successful in updating your firmware to 2.3 from the stock 2.2 that it was providing.
I have a 64 bit windows 7 system, and everytime i try updating the firmware through KIES it crashes.
Has anyone faced this issue?
srijanandroid said:
just wanted to know, were u successful in updating your firmware to 2.3 from the stock 2.2 that it was providing.
I have a 64 bit windows 7 system, and everytime i try updating the firmware through KIES it crashes.
Has anyone faced this issue?
Click to expand...
Click to collapse
Not with kies at least & since then I have ditched this stupid software.........its crap, I now use Odin 1.83 to update any of the firmware.
MTP
How can i get MTP to work? The device manager is showing an error 10. I tried many solutions but no-one worked. Is there any trick or solution for MTP? I have Sam Galaxy SCL i9003 running TheFrankeinsteinMod 3.8. Thanks
erik019 said:
How can i get MTP to work? The device manager is showing an error 10. I tried many solutions but no-one worked. Is there any trick or solution for MTP? I have Sam Galaxy SCL i9003 running TheFrankeinsteinMod 3.8. Thanks
Click to expand...
Click to collapse
Post in the correct thread and maybe you will have the correct answer.
acuicultor said:
Post in the correct thread and maybe you will have the correct answer.
Click to expand...
Click to collapse
LOL. Are you serious? This isn't the right thread? I thought it is. The thread's name is describing my problem. Teach me, boss!
Okay! here it goes.
I am to new tot this android os!
The problem is i updated my firmware to 2.3.4 By reading the tutorials in youtube [Since i didnt knew about this forum]
The problem is since i flashed..
The mass storage mode is not getting connected.
Any solutions?[Tho i have a memory card reader]
And also if i update to some other ROM there's a step where you have to connect your phone through usb will this create a problem?
Because my mass storage mass is not getting connected?
azen1 said:
Okay! here it goes.
I am to new tot this android os!
The problem is i updated my firmware to 2.3.4 By reading the tutorials in youtube [Since i didnt knew about this forum]
The problem is since i flashed..
The mass storage mode is not getting connected.
Any solutions?[Tho i have a memory card reader]
And also if i update to some other ROM there's a step where you have to connect your phone through usb will this create a problem?
Because my mass storage mass is not getting connected?
Click to expand...
Click to collapse
Does your PC have the usb drivers installed??
And on which rom are you??
I think on stock!
but Build number-Gingerbreadxxkpg
Android 2.3.4
The problem is with that ROM itself.
Flash >>THIS<< ROM using ODIN.
It's the official ROM for India having android version 2.3.6
It'll solve the problem.
thankx for the help dude
it is solved.
Now looking for a good rom for galaxy fit..
Try RazoDroid or FitDroid
and err....press the thanks button if i helped you.
check whether u hav istalled USB drivers properly or try flashina new ROM from the android developments section
Install kies my bro it will solve your prob
Sent from my GT-S5670 using Tapatalk
Hi everyone !
Since i passed from Android 2.3.4 gingerbread to android 4.0.4 ICS ... Odin can't detect my phone anymore although it did before the update ! even in normal mode . not in Download mode , the PC can't recognize it anymore , i tried it on 2 PCs in download mode assuring that USB debogaging was on but nothing ....
I'm not on CM9 stable , so is there a special driver that i need to install ?
thanks you
Spirovsk said:
Hi everyone !
Since i passed from Android 2.3.4 gingerbread to android 4.0.4 ICS ... Odin can't detect my phone anymore although it did before the update ! even in normal mode . not in Download mode , the PC can't recognize it anymore , i tried it on 2 PCs in download mode assuring that USB debogaging was on but nothing ....
I'm not on CM9 stable , so is there a special driver that i need to install ?
thanks you
Click to expand...
Click to collapse
Which device do you have? Tried over odin versions?
signs23 said:
Which device do you have? Tried over odin versions?
Click to expand...
Click to collapse
I'm using Samsung Galaxy S2 GT-I9100G
yes tried 1.85 and 3.04
Spirovsk said:
I'm using Samsung Galaxy S2 GT-I9100G
yes tried 1.85 and 3.04
Click to expand...
Click to collapse
windows detects you pohne in the device manager when you plug in? and you started odin with admin rights?
have you installed kies on your pc? try again when you deinstalled it or deactived
signs23 said:
windows detects you pohne in the device manager when you plug in? and you started odin with admin rights?
have you installed kies on your pc? try again when you deinstalled it or deactived
Click to expand...
Click to collapse
no even the PC doesn't detect it anymore ! no i don't have kies .... can you give me a link please ?
Spirovsk said:
no even the PC doesn't detect it anymore ! no i don't have kies .... can you give me a link please ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1655286
with that you should be able to install your pohne usb driver
signs23 said:
http://forum.xda-developers.com/showthread.php?t=1655286
with that you should be able to install your pohne usb driver
Click to expand...
Click to collapse
it says i already have it installed ! but i will try it ! thanks
Besides samsung kies, you should also uninstall and reinstall the correct drivers from the samsung website. Also sometimes something as simple as getting a new usb cable will fix this probem. Sounds kinda dumb but ive had samsung phones that work with one cable and are not recognized by another.
Sent from my SGH-I777 using xda premium
Michael3214 said:
Besides samsung kies, you should also uninstall and reinstall the correct drivers from the samsung website. Also sometimes something as simple as getting a new usb cable will fix this probem. Sounds kinda dumb but ive had samsung phones that work with one cable and are not recognized by another.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I've had that cable problem too, it was due to a cheapo "charge only" USB cable that came with a free charger... lesson learned!
[Solved] Odin doesn't detect your phone. Drivers error. Blah Blah...
Folks!
Your phone BRICKED???
ODIN Doesn't detect your phone???
Shows Driver Error Code 37???
Stuck in bootloop???
Well Well!
Everything is fine.
Don't just try all the solutions online.
The problem is installation of samsung drivers over and over again is replacing the existing drivers instead of wiping them out. So, the drivers have become incompatible with your device and as well as ODIN.
The solution is very simple.
Just reinstall your operating system of pc, install drivers and then You will definitely find what the magic with the drivers.
Hope you found it helpful...
ive rooted an flashed my lg optimus 3d there only one rom that works as all the other roms just keep restarting the phone. i think because i didnt update to ics or something to do with baseband im not sure,i was on gb and still am, iv tried various methods of trying to restore my phone to stock so i can start again but i crnt update the omap drivers as device manager is flashing on and off and when i get chance its says parameter is incorrect, anyhelp to restore or get my phone to ics would be much appreciated please please
For custom ICS ROMs, yes, you have to first install 'regular' ICS. For that as well as driver install:
http://forum.xda-developers.com/showthread.php?t=2195753
Then you can install any custom ROM based on ICS.
You should be logged onto pc as administrator...
hey thanks for the reply i have done all that but the omap driver just wouldnt intall or connect, iive tried a few methods but they dont seem to be working dont know if its through sheer tiredness or now impaitience to get it done but ive now complety baffled myself as im stuck with android guy with a red triangle on boot screen no recovery or anything, not sure where to go from here even to get it back to stock
As described there when it is blinking in device manager you will need to quickly right click on it when it appears then force install it.
drastic00 said:
As described there when it is blinking in device manager you will need to quickly right click on it when it appears then force install it.
Click to expand...
Click to collapse
i did try that that but its keeps disconecting and says parameter not found or error i dont know if it is that it disconncting or a problem with my laptop or phone connector but i shall give it another go, thanks
Use official lg tool, and choose emergency restore, this will flash the newest official ics.
Hope it works
Sent from my LG-P920 using xda app-developers app
no i crnt use the lg tool it says that my phone isnt connected
look
amanda87 said:
ive rooted an flashed my lg optimus 3d there only one rom that works as all the other roms just keep restarting the phone. i think because i didnt update to ics or something to do with baseband im not sure,i was on gb and still am, iv tried various methods of trying to restore my phone to stock so i can start again but i crnt update the omap drivers as device manager is flashing on and off and when i get chance its says parameter is incorrect, anyhelp to restore or get my phone to ics would be much appreciated please please
Click to expand...
Click to collapse
you should run in windows 7 & install lg driver look in http://forum.xda-developers.com/showthread.php?t=2337545
if all above not work change your usb cable & your pc device .
and try again
hey, yea im half way there now, tried it on my other laptop running windows 7 not xp and managed to intall the omap, run the fast boot and all in one tool to install everything, not quite worked as nothing happens after fastboot and just says waiting for device but think i know how to fix that, fingers crossed
Hi everyone,
I have currently some big issue with my GT-N8010.
My custom rom wasn't running very well so I decided to reset my tablet and go back to a new fresh installation.
I downloaded the latest firmware of the tablet on sammobile and started to update it with Odin PC, but in the middle of the transfert I got an error and now my tablet is stuck on the "Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.".
I have no idea how to fix it! And I can't go back to download mode anymore. On top of that, my tablet seems not to be recognize by my computer (I tried to install Kies and the samsung usb driver several times but it keeps saying that's the driver is not ok)...
Can someone help me please ?
Thank you in advance!
What custom rom did you had ? 4.4.2 or 4.1.2 ?
KoRoZIV said:
What custom rom did you had ? 4.4.2 or 4.1.2 ?
Click to expand...
Click to collapse
It was a 4.1.2 (HD Revolution) and I tried to flash with odin the N8010XXUCMK2_N8010XSACNA2_XSA
First uninstall kies and all usb drivers. Restart your computer.
If you can get in download mode (power+volume down then volume up when asked) :
Install some drivers from the sticky topics here on xda. Download the firmware again from another location if possible. Use a different usb port.
If you can't get in download mode, you have to try with kies. I never had success whit it, and i really need it. But it says that n8010 does not support initializing or something like that. Maybe someone else can help with kies.
Sent from my GT-N8010 using Tapatalk
I don't know where it comes from...
I tried everything, uninstall/reinstall Kies/Usb driver, put a VM with Win7 (As I am under Windows 8.1), put Win7 in dual boot to maybe fix the compatibility issue but nothing seems to work! And of course I don't have any other computer to use...
That's maybe the reason the tablet get broken as I used to use Odin on another PC and I didn't check if the usb driver was installed on this one??
I just know that Odin recognized my tablet so I was able to launch the installation of the new firmware.
I feel really bad...Hope the tablet is not definitly dead!
Faulty USB cable perhaps ?
Sent from my GT-N8010 using Tapatalk
Ok so I went to a Samsung store and they told me that I have to send my tablet to the repair center in the country where I bought the device.
It's a big issue for me as I am now living in Australia and my tablet has been bought in France.
On top of that the guy from Samsung explained me that now it's normal if my tablet is not any longer recognize by my computer...
I heard about JTAG, I don't have any idea about the subject but may it fix my problem?
Does someone know how samsung is able to fix the tablet, so I may fix it myself instead of sending to them...?