I have a Samsung galaxy s3 I9305 lte on UK t-mobile EE AND am trying to get back to stock factory.
I have reflashed with Rom. but device still shows modified 1 times after using yellow triangle so I want to get stock boot and kernel.
if anyone has this device I would appreciate a copy.
I have seen downloads available but am too noon to know which to get secure or insecure etc.
thanks in advance
Related
Basically i got a xoom 3g a week ago i unlocked, rooted, backed up, and flashed ics. Ive been having trouble with the screen, its does not respond to my touch quite alot of the times, i need to take it back for warranty.
I restored my back up of honeycomb which is where im at now
Im in australia and baught it on a optus 3g plan. Build is h.6.5-17-1 (does not appear on motorola website)
I need to get rid of cwm recovery and replace it with the original boot loader and also lock the device but keep the current build.
Im very new to this and have no idea what im doing, help would be appreciated, please reply as if i was a 5 year old.
Thx
Check the stock files stickied at the top of the General section. You are likely to find what you're looking for there. Those stock image files are usually earlier builds...if you flash the correct one for your device you should be able to update OTA to the build that you had originally. Just make sure that it is the correct one for your device.
If you rooted, you should be able to restore.
thanks. I flashed the Telstra files and it all works, but the problem is im with Optus ( a difgerent Telco) I cant find those roms anywhere.
When I flashed the telstra 3g rom it places the carriers app, and changes settings and bookmarks etc for the carrier.
I need an optus 3g rom to flash, i dont care what version as long as can run ota to bring it up to 3.2 (which is what i purchased it as stock standarD)
OOOKAAAYY.....after many months of flashing and downloading files. I managed to get AT&T firmware, and modem onto my SPRINT SPH-L720T. I believe it happened after I got rid of anything carrier based, and flashed a google based rom, and then flashed AT&T firmware, CSC file, Modem, and Kernel. Heres the catch...when I did this I lost root and went back to stock recovery. It takes a while to boot, but the at&t firmware loads even with all the AT&T bloat apps, However my baseband is still stuck on L720TVPUBNC6 which is the baseband for sprint galaxy s4. Originally I upgraded it when it still had sprint firmware all the way to android 4.4, but after all the flashing to KK Rom, Cynanongenmod, liquidsmooth etc until the present I cannot change the baseband even when I flash with odin or from recovery mode on the sd card. Do I need to reacquire root , and a custom recovery to do this? Ive spent so many days, and hours doing this, and im finally on the edge of converting this phone completely to AT&T from sprint. My wifi also does not work which I believe is related to to mismatched baseband. Can anyone help?
elight7286 said:
OOOKAAAYY.....after many months of flashing and downloading files. I managed to get AT&T firmware, and modem onto my SPRINT SPH-L720T. I believe it happened after I got rid of anything carrier based, and flashed a google based rom, and then flashed AT&T firmware, CSC file, Modem, and Kernel. Heres the catch...when I did this I lost root and went back to stock recovery. It takes a while to boot, but the at&t firmware loads even with all the AT&T bloat apps, However my baseband is still stuck on L720TVPUBNC6 which is the baseband for sprint galaxy s4. Originally I upgraded it when it still had sprint firmware all the way to android 4.4, but after all the flashing to KK Rom, Cynanongenmod, liquidsmooth etc until the present I cannot change the baseband even when I flash with odin or from recovery mode on the sd card. Do I need to reacquire root , and a custom recovery to do this? Ive spent so many days, and hours doing this, and im finally on the edge of converting this phone completely to AT&T from sprint. My wifi also does not work which I believe is related to to mismatched baseband. Can anyone help?
Click to expand...
Click to collapse
Which recovery would I need now sprint file or at&t?
Android 4.2.2
samsung SGH-I337/SPH-L720T
baseband: l720tvpubnc6
kernel: 3.4.0 812098
[email protected]#1
SELinux status: permissive
build number: JDQ39.I337UCUAMF3
secure boot status: type: samsung
Hi,
I'd suggest you ask for help in this thread dedicated to your model,
Sprint Samsung Galaxy S 4 > Sprint Samsung Galaxy S 4 Q&A, Help & Troubleshooting > [q] ALL THINGS GALAXY S4 (GS4) MODEL SPH-L720T
Good luck!
Thank you. Thread closed.
Good Day need some help. I could not get any signal on my phone so I upgraded from official 4.4.2 to 5.0, still had same issue. For some reason my imei on the battery was different from the imei on the *#06# so I read a post to load an original stock with modem and boot loader to get back my imei to the correct one and now my phone boots and is stuck on the Samsung screen. anyone can assist its Samsung sprint s5 g900p
What did you use to flash the stock rom? Official tar file? Odin? Steps you took? Can you provide more info? Did you try it more than once?
I have a galaxy s6 s-mg920r7 I recently downloaded a apk twrp 3.0 and flashed to it which caused soft brick I can now only get to download mode. When go recovery it loads twrp up fine but touch screen doesn't work if try boot up normally it bootloops any suggestions be really appreciated
Carrier: ntelos
Firmware:5.0.2
Update I was able to get working again by flashing sprint stock rom that comes with skipsoft android tool
Update #2 I am doing stock 6.0 update I'm starting by flashing 920f UK 5.1.1 firmware then downloading galaxy care .apk will update wen or Thurs for update on how went
Wtf ... You cannot flash different model roms... It can couse hard brick from bootloader ...
As of right now can't get beta mm yet but got 920f rom on idk if it's cause the phone u get from ntelos "sprint owns" is a really which listed as generic CDMA no carrier bloat but always use 920f and 920p roms
Sm-g920r7 root
Lepracon87 said:
I have a galaxy s6 s-mg920r7 I recently downloaded a apk twrp 3.0 and flashed to it which caused soft brick I can now only get to download mode. When go recovery it loads twrp up fine but touch screen doesn't work if try boot up normally it bootloops any suggestions be really appreciated
Carrier: ntelos
Firmware:5.0.2
Click to expand...
Click to collapse
INSTALL BACK TO STOCK THEN use the cf auto root download this use google to search first one that comes up use that link go to model sm-g920p cspire and sprint uses
the same network . Use odin to install i have same phone and have mine rooted in this way. So far tried using the sprint version custom rom it will work but you can make phone calls but not the data side for phone internet. Make sure you go to settings in the phone under find my phone and turn off activation lock
I recently received a T-Mobile Galaxy S6, and it was rooted and had a custom kernel, which was a complete mess (the person who owned the phone previously clearly did not know what they were doing) so I just wanted to restore it back to full stock.
I am decently experienced with ODIN, rooting, custom firmware etc, but I have just done one of the biggest rookie mistakes I have ever done. I had accidentally downloaded the most recent firmware for my G920T, not realizing that the file was not for T-Mobile. It was the (XAR) carrier (I believe that is C-Spire but i could be wrong) and the latest was PK1.
It flashed perfectly and all seemed fine until I decided to unlock the device. The T-Mobile S6 requires the use of the "Device Unlock" app and since I had flashed the wrong ROM, the phone thinks the Device Unlock app is not compatible. When I put a different GSM SIM card in the phone, it prompts me to use the Device Unlock app.
I do not have a previous NANDROID backup from the original T-Mobile ROM, and now that I am on the lastest Bootloader for XAR, it will not let me downgrade. I have tried flashing pretty much every MM bootloader and TWRP for both T-Mobile and XAR and none will work (except for what is currently on the device of course) I always get the error "Device: 5 Binary: 4" (sometimes the binary is 3, depending on which version of MM rom or BL I try)
To sum it all up, I am on PK1 (latest for XAR) and I need a way to get back to the official T-Mobile ROM (latest is PD1). Is there a magic method to get this figured out or am I pretty much stuck with what I got until T-Mobile releases an update that is PK1 or higher?
Thank you in advance to all of you that take your time to help (and I am sincerely sorry if I am posting in the wrong section)