Galaxy s6 smg920r7 - Galaxy S6 Q&A, Help & Troubleshooting

I have a galaxy s6 s-mg920r7 I recently downloaded a apk twrp 3.0 and flashed to it which caused soft brick I can now only get to download mode. When go recovery it loads twrp up fine but touch screen doesn't work if try boot up normally it bootloops any suggestions be really appreciated
Carrier: ntelos
Firmware:5.0.2

Update I was able to get working again by flashing sprint stock rom that comes with skipsoft android tool

Update #2 I am doing stock 6.0 update I'm starting by flashing 920f UK 5.1.1 firmware then downloading galaxy care .apk will update wen or Thurs for update on how went

Wtf ... You cannot flash different model roms... It can couse hard brick from bootloader ...

As of right now can't get beta mm yet but got 920f rom on idk if it's cause the phone u get from ntelos "sprint owns" is a really which listed as generic CDMA no carrier bloat but always use 920f and 920p roms

Sm-g920r7 root
Lepracon87 said:
I have a galaxy s6 s-mg920r7 I recently downloaded a apk twrp 3.0 and flashed to it which caused soft brick I can now only get to download mode. When go recovery it loads twrp up fine but touch screen doesn't work if try boot up normally it bootloops any suggestions be really appreciated
Carrier: ntelos
Firmware:5.0.2
Click to expand...
Click to collapse
INSTALL BACK TO STOCK THEN use the cf auto root download this use google to search first one that comes up use that link go to model sm-g920p cspire and sprint uses
the same network . Use odin to install i have same phone and have mine rooted in this way. So far tried using the sprint version custom rom it will work but you can make phone calls but not the data side for phone internet. Make sure you go to settings in the phone under find my phone and turn off activation lock

Related

[Q] HELP G920T flashed wrong carrier stock ROM

I recently received a T-Mobile Galaxy S6, and it was rooted and had a custom kernel, which was a complete mess (the person who owned the phone previously clearly did not know what they were doing) so I just wanted to restore it back to full stock.
I am decently experienced with ODIN, rooting, custom firmware etc, but I have just done one of the biggest rookie mistakes I have ever done. I had accidentally downloaded the most recent firmware for my G920T, not realizing that the file was not for T-Mobile. It was the (XAR) carrier (I believe that is C-Spire but i could be wrong) and the latest was PK1.
It flashed perfectly and all seemed fine until I decided to unlock the device. The T-Mobile S6 requires the use of the "Device Unlock" app and since I had flashed the wrong ROM, the phone thinks the Device Unlock app is not compatible. When I put a different GSM SIM card in the phone, it prompts me to use the Device Unlock app.
I do not have a previous NANDROID backup from the original T-Mobile ROM, and now that I am on the lastest Bootloader for XAR, it will not let me downgrade. I have tried flashing pretty much every MM bootloader and TWRP for both T-Mobile and XAR and none will work (except for what is currently on the device of course) I always get the error "Device: 5 Binary: 4" (sometimes the binary is 3, depending on which version of MM rom or BL I try)
To sum it all up, I am on PK1 (latest for XAR) and I need a way to get back to the official T-Mobile ROM (latest is PD1). Is there a magic method to get this figured out or am I pretty much stuck with what I got until T-Mobile releases an update that is PK1 or higher?
Thank you in advance to all of you that take your time to help (and I am sincerely sorry if I am posting in the wrong section)

[Completed] Help With S6 edge+ bootloop

Just unrooted my phone using Supersu but now i'm stuck in a bootloop all i can access in twrp and odin download mode
I'm trying to install stock rom but dont know which one to download
All i know so far is that my S6edge+ is SM-G928F which i bought from Bestbuy mobile in the U.S.A my service provider is sprint
When i try looking for a stock rom for SM-G928F it says that its European unlocked which confuses me since i bought the phone from bestbuy in the US
i need help picking the right stock rom for my phone I also know my MEID number from download mode if thats relevant
Hi !
It is important to know which variant you have , if it`s an european version then you must download and flash the specific firmware.
You can check on the box if available and also when booting into bootloader
https://forum.xda-developers.com/s6...icial-stock-roms-firmware-aoj5-g928f-t3231589
Good luck !

Can someone help?!?

I rooted my note 5 (sm-n920w8) and installed sick as hell rom. Apparently, I installed the t-mobile version of the rom (sm-n920t), as this is what the model number of my phone now says.. I am now trying to unroot my phone, but odin fails to flash the stock firmware for model sm-n920w8. I dont want to just flash the t-mobile firmware, as I am worried it will make the phone useless in my area. Any solutions to this problem?

Confusing galaxy s6 model

I got samsung galaxy s6
The problem is that i dont understand witch rom i should flash
At the back of my phone and the odin mode says that my model is Sm g920p
But the settings and also other apps such as device info and smart switch says that my model is sm g920f
I thought the previous owner of my phone has flashed a custom rom that changed my model but the confusing part is When i boot into odin mode the Binary says SAMSUNG OFFICIAL.
Please help me
When you're booting into Download Mode, there is an option to show you a bar code, pressing the home buttom. If the meid match with the Dec numbers down behind your phone, it's an 920p.
I have a customized ROM that says OFFICIAL, and a kernel that does the same... don't pay much attention to that. If in Download Mode, it says that the model is G920P, that's the model - doesn't matter what it says anywhere else.
You shouldn't have an issue flashing a firmware. Just flash it, make sure autoreboot isn't on, and restart it into recovery mode, clear cache, system reboot and that should be all.
King-V said:
I have a customized ROM that says OFFICIAL, and a kernel that does the same... don't pay much attention to that. If in Download Mode, it says that the model is G920P, that's the model - doesn't matter what it says anywhere else.
You shouldn't have an issue flashing a firmware. Just flash it, make sure autoreboot isn't on, and restart it into recovery mode, clear cache, system reboot and that should be all.
Click to expand...
Click to collapse
Okey thank you sir.I have one more quistion.I live in asia so my phone is and should be unlocked.If i flash us sprint version on my phone, will it work just fine? Without any service problem
Tuvshuu31 said:
Okey thank you sir.I have one more quistion.I live in asia so my phone is and should be unlocked.If i flash us sprint version on my phone, will it work just fine? Without any service problem
Click to expand...
Click to collapse
Probably, yeah, but it's best to go for unlocked firmwares.
King-V said:
Probably, yeah, but it's best to go for unlocked firmwares.
Click to expand...
Click to collapse
I successfully flashed my phone to a us sprint version as i said.Unfortunately a problem has occurred.I lost my service.It says searching for service by the way My phone detects my sim card and the sim toolkit appeared.But at alst No service.
Can you help with that sir.If the problem occurred because of my new rom can you suggest me an another unlocked rom? please

G920F firmware issues

So, I bought a refurbished unlocked S6 the other day (SM-G920F). I didn't note down the original region on the original TouchWiz, but I do know that it was on 5.1.1. At this point the phone was completely normal. I went to install twrp, which went ok, but after installing twrp, the phone would no longer boot, even though I made no modifications to the stock rom. I then decided to format and install a newer TouchWiz room, which required I also install a "kernel". After installing the kernel, all x axis inputs were inverted and the phone still would not boot. I then decided just to download a France region stock rom for the G920F and flashed it via twrp, which was successful. But for some reason the x axis is still inverted and my imei is completely incorrect. I have tried to use the dialer code, but it does not work because of no network connection. I cannot connect to a cellular network because Android has the wrong imei number. I have also tried to use both kies and smart switch but my device will not show up. I also tried an older version of smart switch for the initialization feature, but it says that the g920f firmware is not supported. If anyone can help me try to at least get my s6 back to stock rom without these issues I'd really appreciate it. Thanks!

Categories

Resources