[Q] Cannot enter CWR on TPT - General Questions and Answers

Hello!
I am the owner of an Thinkpad Tablet, 16GB, 3G, Fw "...0132_WE".
I followed the instructions from this thread to install the clockworkmod on my tablet:
http://forum.xda-developers.com/showthread.php?t=1831161
No errors reported, everything worked fine. But i can't enter the CWR Mode (starting the device with Vol+ pressed). The device just boots normaly. System is workich normaly too.
So whats going wrong?
Thanks for your help,
regards,
sepp

SOLVED
I am sorry, i was confused because I also own a Lenovo A1 107. When entering the recovery mode of the TPT you don't have to HOLD Vol+ - just pres is as many time as the display says "entering recov..."
CLOSED!

Related

A210 - Bricks - Help!

Hi.
I have a problem with brick Acer Iconia A210.
It is hang on acer logo and in left top corner is: bootloader version ISC-MR1-b05547a (unlock mode)
I can;'t communicates with tablet via USB (no device found) even I can't get to recover mode by fallow this instruction:
-----------------------------------------------------------------------------------------------------------------------
Start tablet in recovery:
1. Tablet is off
2. Press VOL-(**) and Power and hold them
3. When tablet vibrates, leave Power button
4. Hold Vol- (** untill it vibrates a second time (little bit shorter than first time)
5. Switch from Vol-(**) to Vol+(*) when is vibrating msecond time
6. you see "booting into recovery" on your tablet, if you have done this correct.
-------------------------------------------------------------------------------------------------------------------------
Any point is correct except last one, I don't have "booting into recovery" but this same hanging acer logo with info about bootloader version.
Any help how can I go to recovery mode? Or how un-brick my tablet?
Thanks.
http://www.android-hilfe.de/4438261-post26.html
Nothing, still say: waiting for device.
OK, I finally unbrick.
I used instruction for factory reset tablets series Iconia and get to bootloader_usb mode. Then I can easy flash new kernel and recovery, so tablet is like was before.
goralpm said:
OK, I finally unbrick.
I used instruction for factory reset tablets series Iconia and get to bootloader_usb mode. Then I can easy flash new kernel and recovery, so tablet is like was before.
Click to expand...
Click to collapse
I am having the same issue could you explain what you did?
Yes, could you explain what you did?
Yes, please tell us how u did it?

[Q] Problem with entering Recoveru Mode in Xperia V

Hi Guys. I don't know that this the right place for this thread or no. sorry.
i have a xperia v device and its rooted. i installed philz touch cwm 6 on it and when i wanted to install cyanogenmod rom on it i wiped everything first, but in the middle of the installation it gave me this error: your device is mint. [status 7]
when i turned off the phone, i did everything to enter the recovery mode: pressing vol+, pressing vol-, holding vol+, holding vil- and...! but no fortune
and now when i turn it on it shows me the SONY logo and then a black screen.
I found the solution to [status 7] error, but i need to enter the recovery mode fisrt.
So please tell me, is there any other way to enter the recovery mode on rooted xperia V?
Thanks.
any sugestion is appreciated

[Q] No Fastboot No Recovery .. Is it dead ?

While i was trying to install the latest official rom to my device (The new Padfone Infinity A86 T004) it is bricked, Now i am facing a very bad (miserable) situation.
When turning on the device it shows me the ASUS logo and in top of the screen a message says : ERROR: Can not boot Invalid boot image!!
And my big problem is that i can't access any of ADB, recovery mode or even fastboot. the phone is undetectable by my PC at all.
I don't know how to force fastboot ... if i can reach the beautiful fastboot mode i will be able to handle the next steps in the fixing journey.
I have red that as long as the device shows something it means that it is not totally bricked .. but how to get out of this situation?
Any suggestions ?
Sorry my englsih is´nt good.
So you can´t broken your phone with OTA Updates
You can delet all files and sysfile and the asus isn´t broken.
you just need patience.
make sure you have the correct driver
turn off your phone,
press vloume up and power, so the phone stay with boot logo, so you are in the fastboot mode.
there you can use my exploit btw the howto downgrade A86, but the downgrade dosent works.
so unzip the newest rom .zip out of asus page....
copy the boot.img and recovery.img in your minimal fast adb folder
so you can:
c:\ADB>fastboot -w ( really wipe all partions and data of your phone!)
c:\ADB\fastboot flash boot boot.img
c:\ADB>fastboot flash recovery recovery.img
copy the complete OTA Update Zip on your phone (internal sd or external is matter)
reboot phone and install the zip out of recovery.
there may be errors come to the first, if that should be the case
then repeat the case up to 3 times
I hope you can read and understand it .
if you need further assistance , please contact me at any time , like even on my homepage lange23.de
BerayekZ said:
While i was trying to install the latest official rom to my device (The new Padfone Infinity A86 T004) it is bricked, Now i am facing a very bad (miserable) situation.
When turning on the device it shows me the ASUS logo and in top of the screen a message says : ERROR: Can not boot Invalid boot image!!
And my big problem is that i can't access any of ADB, recovery mode or even fastboot. the phone is undetectable by my PC at all.
I don't know how to force fastboot ... if i can reach the beautiful fastboot mode i will be able to handle the next steps in the fixing journey.
I have red that as long as the device shows something it means that it is not totally bricked .. but how to get out of this situation?
Any suggestions ?
Click to expand...
Click to collapse
Thank you for your help.
The issue is that the phone now is not detected by the pc at all , i can not access the fast boot ...
Do you really pressed Volume up and Power at the same time, if startet???
If the phone during normal start at the stops bootlogo that's not fastboot!!!
Turn really off an than hold volume up an press Powerbutton, hold it up to boot logo.
then you are really in fastboot mode!
BerayekZ said:
Thank you for your help.
The issue is that the phone now is not detected by the pc at all , i can not access the fast boot ...
Click to expand...
Click to collapse
after turning off
when i press volume up + power button the phone vibrates and the asus logo displayed. then i release power button and keep pressing volume up button => and after 1 second an error appears ERROR: Can not load Invalid boot image!!
when pressing power button + volume down button a menu appears with two options 1.Enter recovery mode and 2.Exit update mode.
when choosing option 1 , the menu disappeared and the asus logo appears without the previous error message.
when choosing option 2 , the the menu disappeared and the asus logo appears and the previous error message.
all these cases the phone didn't go to fastboot mode and never detected by the pc.
when i press volume up + power button the phone vibrates and the asus logo displayed. then i release power button and keep pressing volume up button don´t keep pressing volume up,
fasboot mode only power & up, until the logo. Pressing this two to logo and then left them. the logo sty tuned in display so you re in fastboot
if you pressing up too jump in question menü,
if you pressing at startup power & down jumped directly into question menü, but this menü is wrong for you. you need only fastboot nothing more
BerayekZ said:
after turning off
when i press volume up + power button the phone vibrates and the asus logo displayed. then i release power button and keep pressing volume up button => and after 1 second an error appears ERROR: Can not load Invalid boot image!!
when pressing power button + volume down button a menu appears with two options 1.Enter recovery mode and 2.Exit update mode.
when choosing option 1 , the menu disappeared and the asus logo appears without the previous error message.
when choosing option 2 , the the menu disappeared and the asus logo appears and the previous error message.
all these cases the phone didn't go to fastboot mode and never detected by the pc.
Click to expand...
Click to collapse
keep pressing on volume up button is not jumping in question menü, but shows logo + error message (can not load invalid boot image)
also pressing them to logo then releasing also shows logo + the error message.
i am also uploading a video to youtube to verify..
https://youtu.be/uw4Esyppq_c
and without recovery its right?
And with error message and logo your pc find nothing new unkown devices?
CMCC Composite ADB Interface?
?
BerayekZ said:
https://youtu.be/uw4Esyppq_c
Click to expand...
Click to collapse
Yes, no recovery
And yes PC does not find any new devices
I can not understand it...
I once the boot.img deleted in the phone and also get such error message .
but my systems find an Android device and i can use the fastboot
Any way , a good news that the phone was only few days out of its package and i managed to return it back to the seller and will send to me a new one.
But i am really disappointed with ASUS not to make any unlock tool for the new padfone infinity.
Once, i believed that as long as there is no physical damage in the phone, there will be always a way around to fix it by fastboot. but it discovered that it is not correct and the fast boot itself can be damaged..
Any way thank you so much the only man helped me here sinus23.
I got this problem too
Me too
I got this problem
guys you got to do this , i am having yureka plus5510a no fastboot no recovery
bros no recovery no fastboot boot loop tried all combination not charging nothing what you think you guys are genius give me some let me tell you the whole thing how i ended here .. its all started with the king root(worst decision ) i wanted to flash twrp in my yu yureka plus 5510a no idead what " A" stands for then i used flashify from playstore and downloaded the twrp by the official twrp and flashed it with the flashify and boom boot stuck with no recovery some how removing battery and connecting the phone goes to the charging disp from where i did enable the fast boot but cmd was not able to identify adb devices nor the flashboot commands were working so i did same with win 10 powershell but nothing no devices , so i decided to use a method of ygdp , much hopes with this used ***** 5.1.153.00.P0.160604.8675_I02.def.CPB ******* dont know where the log file is but it was showing old bootloader error downloading and error and error and terminated at 2 % , then this one of your thread by unziping the official files and clicking on flash-all.bat file which he provided img(1) "some trials your phone will be all right " i tried with some "waiting devices error " message but then it just started something happened oem unlock blah_blah and then successful , tried to boot again but this time phone was automatically jumping into fastboot mode , then i finally tried one last time in that power shell thing by typing using cmd and applied fastboot code , even no devices was showing in powershell ,, but then i used some different code something like "fastboot ix902 recovery " and i was able to install a real old twrp recovery.. phone was showing the cyanogen loading ....but later after 1 hour i felt its stuck = + = but luckily recovery was working but but dont know why the buttons setup used to go in fastboot mode was now taking me in recovery,, and fastboot was no longer acessable , i was fine with it so i downloaded latest recovery from your respected thread file named as " twrp-3.0.2-0-20160604-UNOFFICIAL-tomato.img " i wanted to install nougat aosp so i thought its a nice idea to update the recovery first i. so i did the normal recovery update from the recovery it self , and now i guess that recovery was so old , the new one was kinda mindblower for the older one and booom no recovery , no fastboot , tried all the combination and came up with this one volume+ vol- and power shown img (2) same as boot logo but a small "official" tag
pls help i know this post dont suits your professional level , right now i havent slept from kinda like three days cause of exams and this sarcasm of being in trouble.. like my every devices is rooted o in onyx m in tab 2 , it frustating pls help ........i will edit this and make it more polite but if you are one who can solve this .. i am ready to donate man. cause u deserve it , it will gonna be learning experience with you i will be totally into the reply and pls dont scream for drivers i did installed coolpad driver adb drivers everything required i feel yureka is a real fake company their parts isnt distinguishable i did al the steps nicely and cleanly except the (kingroot ) and pls dont brag about the old threads , they didnt helped me much.. and probably why my phone is kinda dead

Lenovo A2107A-H bootloop, can't enter CWM Recovery

Hey guys, I've got a certain problem.
Recently I tried to install (in educational purposes) ROM on my Lenovo A2107A-H. Earlier I had installed CWM on the tablet and it worked fine, however when I pressed Power nad Vol+ default recovery was launched, not the CWM one. I also made backup.
Then, I found out this topic on forum http://forum.xda-developers.com/showthread.php?t=2471194 and as the first ROM I installed SE_FOXTROT_REROOTED-signed.zip. Unfortunately, after installation my tablet would neither get switched on nor get into recovery mode - "Have been in factory mode, long press the power button and the normal boot" text showed up and there was nothing I could do besides pressing reset button on the tablet's back. Luckily when I plugged the tablet to PC, Mtk Droid Tool detected the device and from there I was able to enter into CWM recovery mode, wipe data and finally restore backup.
I thought to myself - "Ok, this was bad ROM so I'll try different one. If the situation repeat, I'll restore backup once again". So this time I installed following ROM: SE_STOCK_A2107A-H_ATT_A404-signed.zip. The situation repeated - as before I couldn't switch on tablet, because it got stuck on Lenovo logo, and also couldn't get into recovery mode.
My problem is that this time Mtk Droid Tool is unable to detect my Lenovo, so I can't enter CWM Recovery and therefore can't restore backup. Could you help me somehow? Thank you.
PS. I dunno if it matters but:
- my Lenovo is Dual-Sim
- when I plug tablet to PC, the PC tries to install MTP USB Driver but it always fails

Huawei p9 lite [Your device has been...etc.]

SOLVED already!
Hello everyone,
i'm new to this so excuse if i do wrong something (title etc..).
I wanted to root my Huawei vns-l31 so i used the srk tool for enable the bootloader and then install the twrp; it seemed that all go right but when i tried to reboot in recovery mode i probably did something wrong in the timing with the combination of buttons and now the phone is stucked on the blackscreen with the message "your device has been unlocked etc etc.. your device is rebooting now.." the problem is that the device it's not really rebooting. I've tried the pwr for 10s, vol up+pwr, vol down+pwr but nothing..the phone doesn't go on fastboot and so i can't flash back anything. Pls help me i've read many threads on xda but no one worked for me.
again sorry if i broke some rules and for my bad english
Thanks to all that will answer this post.
Edit:i Just let the phone turno off because of the battere and then in reboot It showed me the three usual options..Maybe It was Just a bug. Still i dont know why It doesn't open the twrp..I'm Just bad at timing?

Categories

Resources