Hey Guys,
Just wanted to know if anyone had any success flashing some Tmobile radios on their Skyrocket with a Jellybean ROM?
I am currently running AOKP JB Rom, and I have a Tmobile signal, I can make calls and text, but something seems to be blocking my data. APN settings show T-Mobile US, so I know there is a connection.
My current Baseband is: T989UVLH1 <----Is that the problem?
Thanks in advance.
I'm running R4INS AOKP Oct 24 build. Unfortunately I can't seem to get hspa working correctly no matter what radio I flash. I'm going to try a few other ones and report back. I get edge without a problem, but it has issues with H+. I get widely fluctuating strength and terrible down speeds (5kbps). The upload speed is better (300kbps) but not what I should be seeing in my area.
Sent from my SGH-I727 using xda app-developers app
Related
anyone get the i727 or i727R to work on wind mobile HSPA+ network?
I'd like to know too
Sent from my SGH-I727 using xda premium
ive being trying for a bit cant find the right setup i got as close as to wind away text msgs and data no phone call need to find a better radio
ed116 said:
anyone get the i727 or i727R to work on wind mobile HSPA+ network?
Click to expand...
Click to collapse
did u try this http://forum.xda-developers.com/showthread.php?t=1507825 i would like to know if it does work, i might switch to wind when wind gets to my area
Still trying. Anyone else figure it out?
Still working on finding the right combination. Would love to drop Rogers for Wind with a mint second-hand Skyrocket I just picked up. Let me know if you have had any success.
Tried:
1) Juggernaut ROM/Faux009 kernel/Telus i898 KJ3 modem = not working
Juggernaut ROM/Faux009 kernel/T-mobile VK1 modem = not working
2) CM 9.1.0 ROM/Included kernel/Blaze modem MOD = barely working (was able to send one text while I was outside despite being well within coverage)
3) Stock ROM(ugh bloatware)/Stock kernel/Tmo i898 KID radio= best reception so far but still cuts out regularly
Testing in Thorold, near NIagara Falls
ed116 said:
anyone get the i727 or i727R to work on wind mobile HSPA+ network?
Click to expand...
Click to collapse
OFWGKTADGAF said:
I'd like to know too
Sent from my SGH-I727 using xda premium
Click to expand...
Click to collapse
intenseone said:
ive being trying for a bit cant find the right setup i got as close as to wind away text msgs and data no phone call need to find a better radio
Click to expand...
Click to collapse
So far it's working pretty good in 416.
I am using the Rogers SkyRocket
Slimbean 4.1.2 It has to be a 4.1.2 ROM it seems for this to work with the radios/modems as they are compatible with 4.1.2 and below
It works great and I get to 20M on speed test.
**** This is my current issue and I will probably try a different ROM (I really like the Slim stuff)- I reflashed SLIM over the current Slim and will see if it starts the dropping of modem again.
This is my post from anther thread.
The modem keeps disappearing and I have to reflash it to get a signal again.
The phone will just lose the signal and rebooting etc, does not help it get back. You have to reflash the modem file again. This is very strange. I have never read any posts about this issue either.
carrier- Wind Mobile Canada - AWS network like T-Mobile.
It's Slim Rom 4.1.2 on a Skyrocket.
Modem is Blaze 4G LB7 (T-Mobile)
fourth up from the bottom
http://forum.xda-developers.com/show....php?t=1895400
Everything works great but this issue turned up about 2 days after flashing. I wiped and formatted everything before I flashed the ROM.
Hi all.
I just finished picking up my sgs2lte. Really excited about it. I just finished rooting it and now I would like to install an ICS 4.0.4 rom.
My specs are:
SGH-I727R
Android 2.3.5
Baseband I727RUXKJ7
Kernel 2.6.35.11
Build GB.RUXKJ7
I am hoping someone can assist me with this.
What is the best baseband for rogers?
What is the biggest sdcard that I can buy for it? I heard that this device can now accept 64 class10 sdcards, is this true?
Thanks all,
Heeter
I don't think it matters much.
UCLE2 is the recommended modem for most ROMs (Most ROMS will state which modem is recommended), especially the AOSP based ones like CM9 or AOKP. For the most part they seem to be interchangeable.
I have used the UCLE2 and UCLF3 baseband modems with no issues (I believe UCLF3 is the RAT unlocked rogers modem..).
Right now I am using the latest AT&T modem UCLF5, with CyanogenMod 9 (7/02/2012 nightly) and it seems to work just fine.
Are you able to get 4G with your setup?
Thanks for your response, Rabidsmurf
Heeter
Yes, although the phone is somewhat misleading, at least in CM9
The icon will show 3G until in use when it switches to H, I assume this is for power savings or something. Download the speedtest.net app to confirm. On 4G i get around 8Mb/s down and 2.5 Mb/s up.
Additionaly what Rogers calls 4G is HSPA+, if you go to About Phone > Status under mobile network type it should say HSPAP:15 (That is HSPA+ 4G on rogers), conversely 3G is UMTS:3. My phone flips between the two as I mentioned when not in use or in use, could be a ROM specific thing.
Heeter said:
Hi all.
I just finished picking up my sgs2lte. Really excited about it. I just finished rooting it and now I would like to install an ICS 4.0.4 rom.
My specs are:
SGH-I727R
Android 2.3.5
Baseband I727RUXKJ7
Kernel 2.6.35.11
Build GB.RUXKJ7
I am hoping someone can assist me with this.
What is the best baseband for rogers?
What is the biggest sdcard that I can buy for it? I heard that this device can now accept 64 class10 sdcards, is this true?
Thanks all,
Heeter
Click to expand...
Click to collapse
Hi
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
RabidSmurf said:
Yes, although the phone is somewhat misleading, at least in CM9
The icon will show 3G until in use when it switches to H, I assume this is for power savings or something. Download the speedtest.net app to confirm. On 4G i get around 8Mb/s down and 2.5 Mb/s up.
Additionaly what Rogers calls 4G is HSPA+, if you go to About Phone > Status under mobile network type it should say HSPAP:15 (That is HSPA+ 4G on rogers), conversely 3G is UMTS:3. My phone flips between the two as I mentioned when not in use or in use, could be a ROM specific thing.
Click to expand...
Click to collapse
Well, mine was saying 4G before the rooting with the factory settings,
But it says UMTS:3 on there now.
I will install CM9, maybe that will make the difference, I just installed the ATT UCLF5 radio, still 3G
Heeter
What ROM are you using?
If it's SKY ICS, in my experience it will always say 4G no matter what (Unless it's LTE maybe).
If you see UMTS:3 try to open an APP that has constant network demands, it might switch while you're looking at it in the status to HSPAP:15, sometimes it's tough to catch it as the phone seems to go idle as soon you go into the menus
I am also in Edmonton by the way.
Hi Rabidsmurf
Was mistakingly on the Chimera rom, but I just reformatted everything and now is using this SKY ICS 4.2F6 with the UXCLF3 radio, now I am getting the 4G signal
Thanks sooo much for helping me out.
Right on, cool, fellow Edmonton dude.
Heeter
No problem.
I was also going to suggest reviewing your APN settings if all else failed. Found a typo earlier with the APN that comes with CM9 rom (caused MMS to not work), guess that's why it's still an Alpha.
RabidSmurf said:
No problem.
I was also going to suggest reviewing your APN settings if all else failed. Found a typo earlier with the APN that comes with CM9 rom (caused MMS to not work), guess that's why it's still an Alpha.
Click to expand...
Click to collapse
lol actually its at the level of an RC, but I digress
I'm using the I727RUXLF3 Baseband on AOKP Build 40 in the Edmonton area as well and it's running great. I see the same behaviour with the switching between 3G/H signal.
Recently I bought a Samsung Galaxy S2 Skyrocket from AT&T, along with a Net10 SIM card. Everything works, but the data is unreliable. At home (10 miles from Harrisburg, PA), I have a five bar signal, but the internet works on and off. Even when I have the 4G icon on my phone, the internet does not always load. I have (best) coverage in my area, too. I have searched forums, and contacted customer support, and did not find any useful help. I have tried several APN configurations, and my modem ICS is the latest as far as I know (UCLI3), unless if I have a leaked version. Should I downgrade my ICS, upgrade to the leaked ICS, or root my phone? Is there anything I can do?
yevy1234 said:
Recently I bought a Samsung Galaxy S2 Skyrocket from AT&T, along with a Net10 SIM card. Everything works, but the data is unreliable. At home (10 miles from Harrisburg, PA), I have a five bar signal, but the internet works on and off. Even when I have the 4G icon on my phone, the internet does not always load. I have (best) coverage in my area, too. I have searched forums, and contacted customer support, and did not find any useful help. I have tried several APN configurations, and my modem ICS is the latest as far as I know (UCLI3), unless if I have a leaked version. Should I downgrade my ICS, upgrade to the leaked ICS, or root my phone? Is there anything I can do?
Click to expand...
Click to collapse
I would downgrade to ics and start trying out multiple radios and apns ucli3 for me did help in anyway if that doesnt work I would go even down gb good luck is allbi can say but net10 from what i hear isnt the awesome its like more like 1/2 3g
Sent from my SAMSUNG-SGH-I727 using xda premium
Net10
crashpsycho said:
I would downgrade to ics and start trying out multiple radios and apns ucli3 for me did help in anyway if that doesnt work I would go even down gb good luck is allbi can say but net10 from what i hear isnt the awesome its like more like 1/2 3g
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I have a Samung Galaxy Proclaim from Net10 that gets up to 3 Mbps on 3G in my area, which is enough for me. It's pretty annoying when I look at my Galaxy S2 Skyrocket, and it's not loading or lagging at 200kbps.
UCLF6
I downgraded to the uclf6 modem, which sped up the data connection by a little, but not much. I'll try downgrading even more.
I have tried the two new leaks for the ICS modem, which were UCLK4 and UCLL3. Both modem versions were unstable. What I will stick to is the Telus SGH-T989D modem update, which had proven to be the most stable and beneficent results. Thank you for all of your help!
Well I'm on the latest CM nightly (CM 10.1 -20130312) and I just came from CM 10. I tried CM 10.1 before but I had little to no signal and I've decided to give the latest nightly a chance and well, I still have the same problems as before. I flashed the 3.18 radio on it and it literally made NO difference at all. I hate the AT&T variant of the phone. On the CM 10 version I didn't have this problem but there were times that I'd go half an hour to a full hour without getting any texts and then they'll all come in at once (and I know its no coincidence because some of those messages contain people wondering why I haven't replied yet). So can anyone help me with this problem please?? I really like CM 10.1 but not having any mobile data and an even worse signal is a REAL deal breaker for me.
I was having the same issue until I went into settings and changed it to GSM/WCDMA.
Sent from my HTC One X using xda premium
ItsKarriD said:
Well I'm on the latest CM nightly (CM 10.1 -20130312) and I just came from CM 10. I tried CM 10.1 before but I had little to no signal and I've decided to give the latest nightly a chance and well, I still have the same problems as before. I flashed the 3.18 radio on it and it literally made NO difference at all. I hate the AT&T variant of the phone. On the CM 10 version I didn't have this problem but there were times that I'd go half an hour to a full hour without getting any texts and then they'll all come in at once (and I know its no coincidence because some of those messages contain people wondering why I haven't replied yet). So can anyone help me with this problem please?? I really like CM 10.1 but not having any mobile data and an even worse signal is a REAL deal breaker for me.
Click to expand...
Click to collapse
I used to be tech support for att. Obvious question: has this happen before? Now to put my xda hat on. Did you change APN settings? Is this the only rom you flashes? Also call att (611) and have them cancel registration. This basically kicks you off the network and bring you back on. Sim cards are not the issue as the are unable to determine signal strength. Hope you get it fixed.
Sent from my Carbon-ize Evita using xda-developers app
I think it has something to do with the 3.18 radio. I never had problems until flashing it. I have tried multiple roms. Sense based and aosp. It happens on both although it seems to be worse on aosp. I went out of state and lost signal completely while running the latest Chameleon. I went into settings and as soon as I stopped it from searching for LTE it went to full signal. Maybe a tower upgrade issue? 3.18 radio issue? I guess it's something for devs to look into. I know not all towers are the same. 3.18 maybe conflicting with the area he is in. Somebody will get it figured out lol.
Sent from my HTC One X using xda premium
Venomtester said:
I think it has something to do with the 3.18 radio. I never had problems until flashing it. I have tried multiple roms. Sense based and aosp. It happens on both although it seems to be worse on aosp. I went out of state and lost signal completely while running the latest Chameleon. I went into settings and as soon as I stopped it from searching for LTE it went to full signal. Maybe a tower upgrade issue? 3.18 radio issue? I guess it's something for devs to look into. I know not all towers are the same. 3.18 maybe conflicting with the area he is in. Somebody will get it figured out lol.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
That's just weird. I flashed 3.18, and still get the same coverage (4-5 bars, 6mbps data). I don't see how it can effect you. The device is dual HSPA+/LTE. So if the device cannot find LTE, it will always back (circuit switch fall back). Even when I went to an LTE area (Nashville, TN), it still work perfectly. Could be something up with the physical radio inside of the phone. The LTE towers are suppose to be backwards compatible, but we know how companies can be. If your device is working in one area, and not the other, then it is a tower issue. Even though AT&T may find that their towers are ok, it is a tower issue, and there is no doubt around that. Now if it just gives you random coverage, no matter where you are, then it is the phone itself.
Having the same issue on CM. Just tried changing to WCDMA and my signal doubled. That is weird but thanks you guys.
I have a rooted and unlocked at&t skyrocket on jellybean 4.1.2 with very slow speeds, so I tried flashing the radios UCMC1 and UXUMA7 through cwm and nothing has changed. After messing with the APN settings a little my data is no longer working. It shows the bars but I can't get a connection.
I flashed the radio UVLI1 in hopes that I would get lucky but that caused my bars to go away to be replaced by a slashed circle. I flashed back to UCMC1 which is showing the bars, but still no data connection. I have broken my back googling and searching forums on this matter but I can't seem to figure this out. Any help please?
http://forum.xda-developers.com/showthread.php?t=2349914
Don't double post
I think UCMC1 and UXUMA7 are ATT and Rogers radios respectively. UVLI1 is the T-Mobile SGS2 ICS radio, which may not work on your JellyBean rom.
Try UVMC6, which is the radio for T-Mobile's SGS2 Jelly Bean update. You can find it here:
http://forum.xda-developers.com/showthread.php?t=1895400
Results can never be guaranteed, but this is the radio I use, and it has worked fine on every single rom I've tried, Touchwiz or AOSP, even in areas w/o the 1900Mhz refarm.
Can I flash the radio change w/out having my phone rooted?
Rissa82 said:
Can I flash the radio change w/out having my phone rooted?
Click to expand...
Click to collapse
Your phone must have a custom recovery to flash radio files...
It has twrp... that counts right? It doesn't need to be rooted, does it? I'm a computer nerd... phones aren't my thing. Give a girl a break, lol.
Rissa82 said:
It has twrp... that counts right? It doesn't need to be rooted, does it? I'm a computer nerd... phones aren't my thing. Give a girl a break, lol.
Click to expand...
Click to collapse
Yes ... TWRP or CWM are fine...
Rooting is something different, but for radio flash you have enough...
mahanddeem said:
Yes ... TWRP or CWM are fine...
Rooting is something different, but for radio flash you have enough...
Click to expand...
Click to collapse
Would you mind telling me how I flash it or point me to a thread that will walk me through it quickly? Please & thank you!
---------- Post added at 10:25 PM ---------- Previous post was at 10:15 PM ----------
Nevermind! I think I figured it out!
If I have a AT&T skyrocket and have a T-Mobile sim, should I use this radio? Or just stick with the UX, I am currently running?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
DSDONE said:
If I have a AT&T skyrocket and have a T-Mobile sim, should I use this radio? Or just stick with the UX, I am currently running?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
It depends on what you observe using either of these..
Try them one by another and see which one is better (UCMC1 vs UX radio) in signal and data speeds ... Personally I couldn't find any difference in my location ... Both gave me the exact same signal and data speeds (TM LTE).
mahanddeem said:
It depends on what you observe using either of these..
Try them one by another and see which one is better (UCMC1 vs UX radio) in signal and data speeds ... Personally I couldn't find any difference in my location ... Both gave me the exact same signal and data speeds (TM LTE).
Click to expand...
Click to collapse
The UX gave me faster data speeds. Call clarity is about the same. I see 4G more than with the UC radio... I was wondering about the T-Mobile radio
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
T-Mobile radios would give you the ability to connect to T-Mobile 3G using AWS bands 1700/2100 Mhz Band4...And no LTE (or 4G) of course since the Hercules and Blaze (or the note one from TM) devices have no LTE radio chip...
If you live in an area in which T-Mobile deployed their new LTE(and most likely they already refarmed the PCS 1900 band), use UCMC1 or the UXMA7 radio,whichever you find better...Setting the apn to fast.t-mobile.com is essential for sure to get the service...
If you live in an area that T-Mobile is still at their 3G service (AWS bands for HSPA+) use the newest blaze JB radio...
Edit : when you say faster data speeds UX vs UC , any speed vs speed measurement you can share ? probably I didn't give each radio enough testing and jumped to conclude that they have same data speeds !
:good:
mahanddeem said:
It depends on what you observe using either of these..
Try them one by another and see which one is better (UCMC1 vs UX radio) in signal and data speeds ... Personally I couldn't find any difference in my location ... Both gave me the exact same signal and data speeds (TM LTE).
Click to expand...
Click to collapse