Database Info

[Q] Having "ADB is not recognized" Problem Rooting Using Root Debug FS

I'm using this guide to try and root a Galaxy S3 (I535VRLHE) with the ultimate goal of installing CM10, and unfortunately hitting a wall very early on. I'm using Root Debug FS to try and root, but I'm getting the error:
"adb is not recognized as an internal or external command, operable program or batch file."
After that it informs me that "UID and GID should both be 0" Are They? Y/N.
Saying Yes or no here does nothing but insist that my phone is successfully rooted (it isn't). Screenshots attached.
I've searched the forums and have seen this problem, but in most instances it's because users were trying to run RootDebugFS from within a zip, or they hadn't unzipped the files properly. My files are all extracted to the same directory and adb.exe is there. Drivers were all installed correctly. USB cable is OEM. Phone is set to USB debug mode, and unknown sources are allowed.
Any ideas what I'm missing?

Did you install Samsung drivers?
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 05:33 PM ---------- Previous post was at 05:31 PM ----------
Try this link it is a little more extensive.
http://forum.xda-developers.com/showthread.php?p=28530394
Hope this helps.
Sent from my SCH-I535 using xda app-developers app

Droopydroors said:
Did you install Samsung drivers?
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 05:33 PM ---------- Previous post was at 05:31 PM ----------
Try this link it is a little more extensive.
http://forum.xda-developers.com/showthread.php?p=28530394
Hope this helps.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yes, installed Samsung drivers without a problem. Also searched and found that guide, but still get the same error whether I'm using the originally suggested RootDebugFS, or the SuperSU RootDebugFS they suggest.

What version are you on under about phone. And I would re download all the files from the thread I sent you. Could be a bad download that you have.
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 06:03 PM ---------- Previous post was at 05:59 PM ----------
There should be a total of 3 adb files, 3 debug files and 3 superuser files in the download. Are there?
Sent from my SCH-I535 using xda app-developers app

Droopydroors said:
What version are you on under about phone. And I would re download all the files from the thread I sent you. Could be a bad download that you have.
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 06:03 PM ---------- Previous post was at 05:59 PM ----------
There should be a total of 3 adb files, 3 debug files and 3 superuser files in the download. Are there?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Android version 4.04, baseband version I535VRLHE, build number IMM76D,I535VRALHE. All the files appear to be in there (see screenshot). Should note that I've tried this on a Windows 7 laptop AND desktop and have seen the same results, so that suggests it's a phone setting or conflict I'm missing?

HaiLe512 said:
It is homescreen plusplus which used to be batterystatus. you can search for it in XDA forum.
I used UI tweak and changed the separation line to blk and it is good.
Thanks,
HaiLe
Click to expand...
Click to collapse
You are missing a file that is called
SuperSu_GS3_Debugfs_r2a
File size for that file should be 1103KB
So I would try redownloading the pack in the tread I sent you.
Sent from my SCH-I535 using xda app-developers app

Droopydroors said:
You are missing a file that is called
SuperSu_GS3_Debugfs_r2a
File size for that file should be 1103KB
So I would try redownloading the pack in the tread I sent you.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Re-downloaded the file from the link you provided (image 1), extracted, and the file you cite is not there. Downloaded the other straight version of DebugFS (image 2) again and I still get the same error on two different machines.

OK...... well I'm stuck. That's everything I could think of. Hopefully someone with more knowledge will help you out.
Sorry
Sent from my SCH-I535 using xda app-developers app

Droopydroors said:
OK...... well I'm stuck. That's everything I could think of. Hopefully someone with more knowledge will help you out.
Sorry
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Thank you for trying. Do I have other root options if I simply can't get this program to work?

Not that I'm aware of. I'm sure someone will be able to help. I see if I can get someone too look into it from a different thread.
Sent from my SCH-I535 using xda app-developers app

I've tried this on three different PCs, so I assume it's something to do with the phone. Can anyone lend a hand?

I am also having the same problem. I have tried all of the suggestions in multiple guides and forums, still not happening.
Edit/Update: I was finally able to root. I did not run the debug as administrator and it worked perfect. Maybe this will help someone else.

nickmimi said:
I am also having the same problem. I have tried all of the suggestions in multiple guides and forums, still not happening.
Edit/Update: I was finally able to root. I did not run the debug as administrator and it worked perfect. Maybe this will help someone else.
Click to expand...
Click to collapse
I've run it as administrator, but still get the same problem. Very frustrating. Nobody else has any ideas I could try to get this to work?

TheShakes said:
I've run it as administrator, but still get the same problem. Very frustrating. Nobody else has any ideas I could try to get this to work?
Click to expand...
Click to collapse
Also: I've now tried this on two PCS and a laptop and get the same error...so it's something with the phone itself....

TheShakes said:
Also: I've now tried this on two PCS and a laptop and get the same error...so it's something with the phone itself....
Click to expand...
Click to collapse
I THINK he's saying "DONT run it as Administrator. "
I have the same version phone, I ran as administrator the first time, didnt work.
Had the same problem as you did.
Second time I ran it as I regularly would, worked like a charm.

blakeharrell said:
I THINK he's saying "DONT run it as Administrator. "
I have the same version phone, I ran as administrator the first time, didnt work.
Had the same problem as you did.
Second time I ran it as I regularly would, worked like a charm.
Click to expand...
Click to collapse
That was it, thanks!
For people finding this via Google, do NOT run it as administrator like most guides suggest.

blakeharrell said:
I THINK he's saying "DONT run it as Administrator. "
I have the same version phone, I ran as administrator the first time, didnt work.
Had the same problem as you did.
Second time I ran it as I regularly would, worked like a charm.
Click to expand...
Click to collapse
how do u run it without being an admin
im having the same problem as the OP

Run As Admin correct steps
I had the same problem and resolved it by running the RootDebugfs.bat file in an command window run as administrator.
For win7 - 1) type cmd in the find box 2) a black cmd program icon appears at the top - right click it and choose run as administrator 3) from inside the command window navigate to where you unzipped the root fs program and run it. For example, type cd c:\some directory\RootDebugfs.bat

[2nd-init]Motorola XT530/531

Finally 2nd-init for our XT​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[CENTER]Note:
This is currently for dev purposes only. Please do not proceed
if you don't know what are you doing. And devs, any
help in bug resolving and testing for more bugs would
be appreciated.[/CENTER]
What 2nd-init?
2nd-init allows us to boot our custom init scripts which wasn't a easy job on a locked booloader.
Click to expand...
Click to collapse
Locked bootloader? Now what the heck is it?
Motorola usually locks its phones bootloader which in simple language means it doesn't allow customization. Here is where 2nd-init comes to play, this little awesome app kicks in right after the Bootloader and allows the XT to load a different, non-Stock Android.
With this, you can also install a Custom Recovery, which runs from the Internal Memory, and is not ran from the Recovery Partition (remember: locked, not accessible) what does this means? That even screwing up your phone, deleting all your stuff, or screwing /system partition the phone can still get into Recovery, be recognized by RSD Lite in Bootloader Mode and be flashed with a Stock ROM and it will come back to live normally.
Thanks to this locked Bootloader, is really, really hard to Brick your XT.
Click to expand...
Click to collapse
Code:
You've already messed up with your phone.
Now if something happens don't point your finger to me.
All I can do is to laugh at you, as loud as possible.
So always keep in mind that you do changes by your choice.
Thank YOU
Preparations:
1. Make sure you are on stock ROM. If not please flash using RSD. GUIDE HERE.
2. Make sure you have the phone rooted. If you haven't rooted yet see this GUIDE
3. CWM must be installed to proceed. Install it here
Click to expand...
Click to collapse
Installation
1. Download the attachment and extract it in your PC using any decompressing software.
2. Double click "2nd-init_Installer.bat"
3. Just press any key to continue.
Click to expand...
Click to collapse
Booting into 2nd-init:
Disconnect your phone. While you see the "M" logo, stare at the soft buttons. They'll light once(only for 1.5sec). As soon as they light press vol down(-). Now scroll down using vol. Select BOOT>>2nd-init with the help of power button.
Click to expand...
Click to collapse
Going back to stock:
Boot into bootmenu like you did earlier. And this time BOOT>>STOCK. You should be back into normal phone with stock scripts
Click to expand...
Click to collapse
Known limitations:
Damaged sdcard error
Couldn't download apps via Google play.
adb shell not working
Click to expand...
Click to collapse
DOWNLOAD​
Click to expand...
Click to collapse

But.. mediafire said error no 320, what happen?
Update: Sorry it's my fault. The link works good.. Now I'm downloading..
Thank's a lot.

great man! :thumbup:
Sent from my XT531 using xda app-developers app

waiting
aweosomeabhijeet said:
Finally 2nd-init for our XT​
Code:
[CENTER]Note:
This is currently for dev purposes only please do not proceed
if you don't know what are you doing. And devs, any
help in bug resolving and testing for more bugs would
be appreciated.[/CENTER]
​
Code:
You've already messed up with your phone.
Now if something happens don't point your finger to me.
All I can do is to laugh at you, as loud as possible.
So always keep in mind that you do changes by your choice.
Thank YOU
​
Click to expand...
Click to collapse
We will waiting for your work :good:

If you port cyanogenmod to our device, we've to put this on our device for install the cyanogen?

ufinopantesco said:
If you port cyanogenmod to our device, we've to put this on our device for install the cyanogen?
Click to expand...
Click to collapse
No. You must only have CWM. Rest all would be included.
Sent from my XT530 using xda app-developers app

Hey we can even boot back to the normal ROM by selecting Stock>>Boot in the CWM recovery.

rituj26 said:
Hey we can even boot back to the normal ROM by selecting Stock>>Boot in the CWM recovery.
Click to expand...
Click to collapse
Yeah. That is obvious bro.
Sent from my XT530 using xda app-developers app

@awesomeabhijeet:good:
:fingers-crossed::fingers-crossed:
Now what is ur next project ?
is it icj v3 or
the direct cyanogenmod port to our device??

CYANOGEN !
loveroopesh said:
@awesomeabhijeet:good:
:fingers-crossed::fingers-crossed:
Now what is ur next project ?
is it icj v3 or
the direct cyanogenmod port to our device??
Click to expand...
Click to collapse
i hope cyanogenmod port :good: or that will be awesome if ICJ V3 will be based on cyanogen ROM :laugh:

loveroopesh said:
@awesomeabhijeet:good:
:fingers-crossed::fingers-crossed:
Now what is ur next project ?
is it icj v3 or
the direct cyanogenmod port to our device??
Click to expand...
Click to collapse
First ICJ V3, then getting 2.6.53.11-perf stable, then cyanogenmod.
But I need some donations to buy new PC, my old one is dead. Or you've to wait for atleast a year.
Sent from my XT530 using xda app-developers app

oh god why
aweosomeabhijeet said:
First ICJ V3, then getting 2.6.53.11-perf stable, then cyanogenmod.
But I need some donations to buy new PC, my old one is dead. Or you've to wait for atleast a year.
Sent from my XT530 using xda app-developers app
Click to expand...
Click to collapse
that was really a bad news for me :crying:

hasbulah said:
that was really a bad news for me :crying:
Click to expand...
Click to collapse
I thought the same thing :crying:

thanks...

Now when 2nd- init is available
Can we use rom manager.
Sent from my XT530 using xda premium

loveroopesh said:
Now when 2nd- init is available
Can we use rom manager.
Sent from my XT530 using xda premium
Click to expand...
Click to collapse
We have by-passed the normal init process. Bootloader is still locked.
Sent from my XT530 using xda app-developers app

2nd-init
aweosomeabhijeet said:
We have by-passed the normal init process. Bootloader is still locked.
Sent from my XT530 using xda app-developers app
Click to expand...
Click to collapse
solving the sdcard it might not work as still 2nd-init for our XT???????????????????????''': Confused:: Confused:

aweosomeabhijeet said:
We have by-passed the normal init process. Bootloader is still locked.
Sent from my XT530 using xda app-developers app
Click to expand...
Click to collapse
...You mean, 2nd init is not the way to unlock bootloader?. While the bootloader is still locked, is it not possible to install new kernel, right?
Sorry I'm obviously newbie..

top1xx said:
...You mean, 2nd init is not the way to unlock bootloader?. While the bootloader is still locked, is it not possible to install new kernel, right?
Sorry I'm obviously newbie..
Click to expand...
Click to collapse
It is possible to have custom kernel with 2nd-boot. But I don't have time to look at the sources and compile a kernel. Sorry neither I have a PC to do so.

aweosomeabhijeet said:
Finally 2nd-init for our XT​
Code:
[CENTER]Note:
This is currently for dev purposes only. Please do not proceed
if you don't know what are you doing. And devs, any
help in bug resolving and testing for more bugs would
be appreciated.[/CENTER]
​
Code:
You've already messed up with your phone.
Now if something happens don't point your finger to me.
All I can do is to laugh at you, as loud as possible.
So always keep in mind that you do changes by your choice.
Thank YOU
​
Click to expand...
Click to collapse
Great job, just make this our Motorola Fire XT530 look like Optimus Me who have CM10 (Jelly Bean) http://forum.xda-developers.com/showthread.php?p=35614605

[GUIDE] [4.1] How to root and install CWM

GALAXY S II PLUS ROOTING AND CWM
​
PREREQUISITES:
-An I9105/P
-Odin3
-As usual, a brain
Click to expand...
Click to collapse
NOTE:
Rooting will increase your binary counter.
ROOTING:
A) CWM (Thank you k2wl!!)
Download k2wl's CWM here.
Make sure you have Odin installed and Kies NOT running.
Boot your phone into Download mode by pressing: Vol.Down + Home + Power buttons all together.
Open Odin as an administrator.
Connect to PC using a USB cable.
Odin should show COM:X (X could be anything) on the left side which means your device is recognized.
Click on PDA and look for the file you downloaded (CWM file, should be named cwm_s2vep_k2wl.tar, or something along those lines) and choose it.
When Odin says Leave CS, press Start and wait, shouldn't take longer than 1-2 minutes.
Quick Note: This is not tested for I9105, but it theoretically should work.
B) Rooting
Download this file, and this file.
Place them both in your internal or external SD card.
Now reboot into recovery with the following combination: Vol.Up + Home + Power buttons all together.
Choose install zip from sd card, and choose external or internal, depending on where you put the root zip file in.
Flash the root zip "UPDATE-SuperSU.zip"
Flash "cwm-permanentor.zip"
Reboot
Done, you are now rooted!
UNROOTING AND REVERTING TO STOCK STATE:
Alright so, if you would like to unroot your phone and send it to warranty or sell it... Do the following.
Download Triangle Away by Chainfire from here.
Install it and use it to reset the binary counter.
Download the latest stock firmware for your device, make sure it's on the form of XX**** (e.g. XXAMC2). Non XX firmwares are fishy, and tend to brick devices sometimes. So get the latest firmware from live.samsung-updates.com. Always remember to choose the fimware with YOUR EXACT DEVICE MODEL.
Extract the .zip file from the download to attain a .tar.md5 fie.
Flash it using Odin.
After the firmware has flashed and the device reboots, delete root-related apps like Superuser (might or might not be there), and such.
Done, you are now back to stock state

We've just retired method 1 (prerooted firmwares).
Stick to the SuperSU method... easier and faster, no errors.

Reserved
Sent from my LG-LS970 using xda app-developers app

jonahly said:
Reserved
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Whut?
Sent from my GT-I9105P

panda00 said:
Whut?
Sent from my GT-I9105P
Click to expand...
Click to collapse
I reserved it so if I want to post again I can just edit it
Sent from my LG-LS970 using xda app-developers app

jonahly said:
I reserved it so if I want to post again I can just edit it
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
But i think Panda want to know why you reserved it. because you are not a topic starter.

Aaltink said:
But i think Panda want to know why you reserved it. because you are not a topic starter.
Click to expand...
Click to collapse
NOOOOO I guess your welcome Panda00. ( Starts walking away... ****!! )

which one wil work for gt-9105 please copy paste the process from above... very confused with above post
Sent from my GT-I9105 using xda app-developers app

prakharjin20 said:
which one wil work for gt-9105 please copy paste the process from above... very confused with above post
Sent from my GT-I9105 using xda app-developers app
Click to expand...
Click to collapse
There's only 1 method in the first post as of now.
Sent from my GT-I9105P

will d phone become dead if i made ny error??
Sent from my GT-I9105 using xda app-developers app

prakharjin20 said:
will d phone become dead if i made ny error??
Sent from my GT-I9105 using xda app-developers app
Click to expand...
Click to collapse
Not really. But as usual it's your responsibility
Sent from my GT-I9105P

Thanks and a Question
Thanks a Lott Panda for this you are Awesome!!!, will this work on latest firmware like I9105DDAMC2 I9105ODDAMC1.
Thanks,
Nitin Aswani
prakharjin20 said:
will d phone become dead if i made ny error??
Sent from my GT-I9105 using xda app-developers app
Click to expand...
Click to collapse

bikelover1352 said:
Thanks a Lott Panda for this you are Awesome!!!, will this work on latest firmware like I9105DDAMC2 I9105ODDAMC1.
Thanks,
Nitin Aswani
Click to expand...
Click to collapse
Yes it should!

Thanks for the reply
panda00 said:
Yes it should!
Click to expand...
Click to collapse

Help needed
Odin can't detect my phone...
Sent from my GT-India 9105 using xda app-developers app

prakharjin20 said:
Help needed
Odin can't detect my phone...
Sent from my GT-India 9105 using xda app-developers app
Click to expand...
Click to collapse
Do you see a COM:## sign on the left? Where ## is any number (the port in which you connected your phone). If yes then proceed normally as instructed in the OP. If not then try connectimg your phone to Kies software. It should download the S2 Plus USB drivers then. If that doesn't work try a different USB cable. If that doesn't work either try a different computer. Good luck
Sent from my GT-I9105P

Its written id:com
Nd will try on other pc thanks in advance
Sent from my GT-I9105 using xda app-developers app

Help please.
Okey, i fallow the instruction and when i flash custom kernel i restart phone and try to get in "custom recovery" but it only loads official andriod recovery mode , can any one help me? Thanks.

Koldas7 said:
Okey, i fallow the instruction and when i flash custom kernel i restart phone and try to get in "custom recovery" but it only loads official andriod recovery mode , can any one help me? Thanks.
Click to expand...
Click to collapse
Reflash C but this time untick auto reboot. After odin says reset... boot into recovery straight from download mode using the key combination for recovery
Sent from my GT-I9105P

stock recovery
The first time CWM always works but then if I try it again, it has jumped back to stock recovery. I also tried it with auto boot unchecked.
Any suggestions?

[Root][GT-I9500]Root your galaxy S4 GT-I9500 in an easy way

Rooting Galaxy S4 GT-I9500​
Hey Friends! In this thread I will show you how to root the galaxy S4 in an easy and safe way using CF Auto root.
This thread is for beginners that they don't want to lose data By rooting there devices.
This method will work even on android 4.2.2 or 4.3
Disclaimer:No developer will be responsible if you Brick your device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First of all,Check these requirements:
Your device must be charged
You have to enable USB Debugging by going to" About device" and Hit 8 times at the build number than go to developer option and enable the USB debugging.
Disable Kies and antivirus in your PC in case they stopped the operation
GT-I9500 ONLY
Have some patient
Now Rooting the device:
Download the CF Auto Root package from here http://download.chainfire.eu/326/CF-Root/CF-Auto-Root/CF-Auto-Root-ja3g-ja3gxx-gti9500.zip and don't extract.
Download the odin3 package and extract
Now in your galaxy S4,boot into download mode by pressing Volume Down+Home+Power
Open odin3 and connect your S4 to your computer,Now ID:COM will turn blue
"Auto Reboot" and "F.Reset Time" must be Checked and "Repartion" must Be UNCHECKED
Now Press PDA and select the CF Auto Root package that you have downloaded
Press start and wait few Seconds to Odin finish the operation,You will see PASS in odin when it is completed
Now Your phone Will Reboot into recovery mode and Root your device Itself
NOTE:If your device make a normal boot and does not boot into recovery mode just pull the battery out and insert it again and boot into recovery by pressing Volume up+Home+Power and the phone will start the root process.
Voila!Your galaxy S4 is now successfully rooted!
Note that your warranty will be void.
If i helped you Just Hit Thanks!!
Credits:THANKS FOR CHAINFIRE FOR CREATING THIS FILE.

Guys If someone have questions just comment and i will reply!!!

danyznd123 said:
Rooting Galaxy S4 GT-I9500​
Hey Friends! In this thread I will show you how to root the galaxy S4 in an easy and safe way using CF Auto root.
This thread is for beginners that they don't want to lose data By rooting there devices.
This method will work even on android 4.2.2 or 4.3
Disclaimer:No developer will be responsible if you Brick your device
First of all,Check these requirements:
Your device must be charged
You have to enable USB Debugging by going to" About device" and Hit 8 times at the build number than go to developer option and enable the USB debugging.
Disable Kies and antivirus in your PC in case they stopped the operation
GT-I9500 ONLY
Have some patient
Now Rooting the device:
Download the CF Auto Root package from here http://download.chainfire.eu/326/CF-Root/CF-Auto-Root/CF-Auto-Root-ja3g-ja3gxx-gti9500.zip and don't extract.
Download the odin3 package and extract
Now in your galaxy S4,boot into download mode by pressing Volume Down+Home+Power
Open odin3 and connect your S4 to your computer,Now ID:COM will turn blue
"Auto Reboot" and "F.Reset Time" must be Checked and "Repartion" must Be UNCHECKED
Now Press PDA and select the CF Auto Root package that you have downloaded
Press start and wait few Seconds to Odin finish the operation,You will see PASS in odin when it is completed
Now Your phone Will Reboot into recovery mode and Root your device Itself
NOTE:If your device make a normal boot and does not boot into recovery mode just pull the battery out and insert it again and boot into recovery by pressing Volume up+Home+Power and the phone will start the root process.
Voila!Your galaxy S4 is now successfully rooted!
Note that your warranty will be void.
If i helped you Just Hit Thanks!!
Click to expand...
Click to collapse
I dont see any credit to Chainfire....

All these infos are available in Chainfires own Thread...what is new or different here..???
Sent from my GT-I9500 using xda premium

ipsuvedi said:
All these infos are available in Chainfires own Thread...what is new or different here..???
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Plz this is for beginners not for senior developers like you so don't comment like this.

theunderling said:
I dont see any credit to Chainfire....
Click to expand...
Click to collapse
I think all members know that this file is from chainfire...

We already know about this why you create another??
Sent from my GT-I9500 using xda app-developers app

danyznd123 said:
I think all members know that this file is from chainfire...
Click to expand...
Click to collapse
Youve even said its "your work" in your sig.Youve brought nothing new to the table, and you are meant to give credit to Chainfire as it is his work, not yours ok.

theunderling said:
Youve even said its "your work" in your sig.Youve brought nothing new to the table, and you are meant to give credit to Chainfire as it is his work, not yours ok.
Click to expand...
Click to collapse
CAN YOU STOP SAYING THIS???
I worked hard for 1h to type this guide WITHOUT ANY HELP FROM ANY SITE OF MEMBER
So don't comment if you didn't like this thread please
I AM SAYING IT FOR ALLLLL MEMBERS THAT ENTER:
THIS THREAD IS ONLY FOR BEGINNERS AND NOT FOR SENIORS THAT KNOW ALL THESE INFORMATION!!!!!!!!!!

aijazji said:
we already know about this why you create another??
Sent from my gt-i9500 using xda app-developers app
Click to expand...
Click to collapse
this thread is only for beginners and not for seniors that know all these information!!!!!!!!!!

funny thread!
Sent from my GT-I9500 using XDA Premium 4 mobile app

Congratulations on the hour it took you to write this very helpful thread for beginners. However this is a guide on using a tool that took a great deal longer than an hour to develop, and while this is your own guide on how to root with with cf auto root, it is simply a mirrored/ re worded guide to which there is already a thread. It should be removed unless you have permission from the original dev of the tool, and with that you should then give credit to that developer
Sent from my GT-I9505 using xda premium

naokilla said:
Congratulations on the hour it took you to write this very helpful thread for beginners. However this is a guide on using a tool that took a great deal longer than an hour to develop, and while this is your own guide on how to root with with cf auto root, it is simply a mirrored/ re worded guide to which there is already a thread. It should be removed unless you have permission from the original dev of the tool, and with that you should then give credit to that developer
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
i DIDN'T copy anything you can compare my thread with the original one there are totally diffrent!!!
And btw i gived the credit to chainfire that have created the root zip file!

danyznd123 said:
i DIDN'T copy anything you can compare my thread with the original one there are totally diffrent!!!
And btw i gived the credit to chainfire that have created the root zip file!
Click to expand...
Click to collapse
haha..!! funny.. anyway thanks..!! Thats what you were expecting right!! :silly:

danyznd123 said:
CAN YOU STOP SAYING THIS???
I worked hard for 1h to type this guide WITHOUT ANY HELP FROM ANY SITE OF MEMBER
So don't comment if you didn't like this thread please
I AM SAYING IT FOR ALLLLL MEMBERS THAT ENTER:
THIS THREAD IS ONLY FOR BEGINNERS AND NOT FOR SENIORS THAT KNOW ALL THESE INFORMATION!!!!!!!!!!
Click to expand...
Click to collapse
Lol. Go do some better work mate. This thread is totally useless regardless of the arguing you are willing to do to prove otherwise. Instructions to root are pretty straight forward and easy to follow in chainfire's own thread.

abusalem said:
Lol. Go do some better work mate. This thread is totally useless regardless of the arguing you are willing to do to prove otherwise. Instructions to root are pretty straight forward and easy to follow in chainfire's own thread.
Click to expand...
Click to collapse
If all the members even juniors think that I am good-for-nothing,I will delete this thread... :crying: :crying: :crying: :crying: :crying: :crying:
NOTE::my device is galaxy ace plus based on android gingerbread 2.3.6 with custom rom and not galaxy s4 based on jelly bean 4.3 but i made this thread to see if i am good in s4 or not...It seems i am not until i change my phone to galaxy s4

How about knox. I just bought the s4 with original 4.3
Sent from my GT-I9505 using Tapatalk

EclipseX said:
How about knox. I just bought the s4 with original 4.3
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
You can freez it on titanium backup or when you enter supersu it asks you if you want to delete it.

I'm afraid about 0x1 status
Sent from my GT-I9505 using Tapatalk

danyznd123 said:
this thread is only for beginners and not for seniors that know all these information!!!!!!!!!!
Click to expand...
Click to collapse
vlw very easy for the help

[TOOL][All arch][2.3+]WifiKey v3.0

Script with simple user interface for checking WiFI names, passwords and security type of all saved networks.
Script also have an option to export all to /sdcard/PASS.export
How to install:
1. Download .pdf file from ANDROID FILE HOST
2. Rename it to "wifi" without quotes
3. Copy to /system/bin
4. Set permissions to 755
How to access:
Open terminal emulator and type
Code:
su
wifi
Option 1 shows all wifi networks on which you are connected
And below you will see the option for exporting to sdcard.
Option 2 is for a donation
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ANDROID FILE HOST
PAYPAL users can donate me using this link
http://forum.xda-developers.com/donatetome.php?u=5514152
If you have issues, download paypal app from playstore, that will work
For US users:
"I could not use your paypal donation link or url as you already know as it's not possible to send a donation from USA. I logged into my paypal account and used the option to pay for goods or services to send you the funds."
Thanks a lot, guys
​

V1.0
Initial version
V2.0
Code optimization
Fixed reverting on wrong command
Tool is now flashable
V3.0
Updated: While loop
Sent from my Nexus 5 using Tapatalk

Nice tool. Thanks

core7x said:
Nice tool. Thanks
Click to expand...
Click to collapse
Thank you
Sent from my Nexus 5 using Tapatalk

Ohh another project nice! Will try this out man thanks dude.
Edit: just installed dude and I followed picture to set permission to 755 and mine says this
Sent from my Nexus 4 using Tapatalk

insigma28 said:
Ohh another project nice! Will try this out man thanks dude.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Ok, thank you
Please report back ^~^
Sent from my Nexus 5 using Tapatalk

Paget96 said:
Ok, thank you
Please report back ^~^
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Dude just recheck my post above having a problem setting permissions.
Sent from my Nexus 4 using Tapatalk

insigma28 said:
Dude just recheck my post above having a problem setting permissions.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
That's it, but in some reason that file manager shows wrong
Sent from my Nexus 5 using Tapatalk

insigma28 said:
Ohh another project nice! Will try this out man thanks dude.
Edit: just installed dude and I followed picture to set permission to 755 and mine says this
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Only copy the file inside the zip, not the zip itself, into system/bin.
Sent from a Cool Phone stuck with crappy KingUser

MSF Jarvis said:
Only copy the file inside the zip, not the zip itself, into system/bin.
Sent from a Cool Phone stuck with crappy KingUser
Click to expand...
Click to collapse
Yes, that too [emoji23] [emoji23]
Sent from my Nexus 5 using Tapatalk

Paget96 said:
I just made a simple script with user friendly interface with who you can see names, passwords and security type of all wifi networks on which you are connected.
Script also have an option to export all to /sdcard/PASS.export
How to install:
1. Download zip (NOT-FLASHABLE)
https://www.androidfilehost.com/?fid=24052804347841427
2. Copy file from it to /system/bin or /system/xbin
3. Set permissions to 755
Here is a pic how 755 looks
How to access:
Open terminal emulator and type
Code:
su
PASS
Option 1 shows all wifi networks on which you are connected
And below you will see the option for exporting to sdcard.
Option 2 is for a donation
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
It starts up fine but doesn't respond to input. I keep mashing the buttons for a minute and when I press enter, it says invalid option and exits. Thought must be a display problem, so I just pressed one ('1') and pressed enter. Same result.
I looked through the script, but there's no error.
Edit : Tried with two different emulators same response.
Sent from a Cool Phone stuck with crappy KingUser

MSF Jarvis said:
It starts up fine but doesn't respond to input. I keep mashing the buttons for a minute and when I press enter, it says invalid option and exits. Thought must be a display problem, so I just pressed one ('1') and pressed enter. Same result.
I looked through the script, but there's no error.
Sent from a Cool Phone stuck with crappy KingUser
Click to expand...
Click to collapse
Thank you for report, I'm going to fix it
Sent from my Nexus 5 using Tapatalk

Paget96 said:
Thank you for report, I'm going to fix it
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Happy to help. Hit me back when you're done, so I can test it.
Sent from a Cool Phone stuck with crappy KingUser

Congrats man, another project
Keep it up!

MSF Jarvis said:
Happy to help. Hit me back when you're done, so I can test it.
Sent from a Cool Phone stuck with crappy KingUser
Click to expand...
Click to collapse
Works without any problem
Just type "1"
And hit enter....
nilac said:
Congrats man, another project
Keep it up!
Click to expand...
Click to collapse
Thank you
One more is coming in next hour or two
Sent from my Nexus 5 using Tapatalk

Paget96 said:
Works without any problem
Just type "1"
And hit enter....
Thank you
One more is coming in next hour or two
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I know it's working, just not for me.
Sent from a Cool Phone stuck with crappy KingUser
---------- Post added at 04:21 PM ---------- Previous post was at 04:19 PM ----------
MSF Jarvis said:
I know it's working, just not for me.
Sent from a Cool Phone stuck with crappy KingUser
Click to expand...
Click to collapse
Correction : Now works, was some problem with crap **** KingUser. Works like a charm, just if the ssid and password came in ordered pairs, it would have been better.
Sent from a Cool Phone stuck with crappy KingUser

MSF Jarvis said:
I know it's working, just not for me.
Sent from a Cool Phone stuck with crappy KingUser
Click to expand...
Click to collapse
Can you screenshot in a time when show you an error output???
Sent from my Nexus 5 using Tapatalk

MSF Jarvis said:
I know it's working, just not for me.
Sent from a Cool Phone stuck with crappy KingUser
---------- Post added at 04:21 PM ---------- Previous post was at 04:19 PM ----------
Correction : Now works, was some problem with crap **** KingUser. Works like a charm, just if the ssid and password came in ordered pairs, it would have been better.
Sent from a Cool Phone stuck with crappy KingUser
Click to expand...
Click to collapse
Hahahaa ,ok ok ^~~~^
Sent from my Nexus 5 using Tapatalk

Paget96 said:
Hahahaa ,ok ok ^~~~^
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I think I'll also include it in the next build of my ROM. Along with your busybox and L Speed Mod v3.2 . Will give credits along with links to original thread[emoji6] [emoji6] [emoji6] .
Sent from a Cool Phone stuck with crappy KingUser

MSF Jarvis said:
I think I'll also include it in the next build of my ROM. Along with your busybox and L Speed Mod v3.2 . Will give credits along with links to original thread[emoji6] [emoji6] [emoji6] .
Sent from a Cool Phone stuck with crappy KingUser
Click to expand...
Click to collapse
Woow
That's a great support, thank you
Sent from my Nexus 5 using Tapatalk