I'm trying to install the latest CM10 nightly on this Roger's Samsung Galaxy S2 (I727R, as per under the battery) and I see an assert fail message. It doesn't match "skyrocket" or "...I727". What about 727R? I thought R was the LTE model? Am I doing something wrong here or is the nightly messed up?
ninjai117 said:
I'm trying to install the latest CM10 nightly on this Roger's Samsung Galaxy S2 (I727R, as per under the battery) and I see an assert fail message. It doesn't match "skyrocket" or "...I727". What about 727R? I thought R was the LTE model? Am I doing something wrong here or is the nightly messed up?
Click to expand...
Click to collapse
What recovery are you using? CM10 requires at least CWM 6 or TWRP 2.2 (think it's 2, at least 2)
rpr69 said:
What recovery are you using? CM10 requires at least CWM 6 or TWRP 2.2 (think it's 2, at least 2)
Click to expand...
Click to collapse
I had the same thing using CWM 6.0.1.2 (I think 2. Definitely above 6.)
Installing update
Assert failed: getprep ("ro.product.device")=="skyrocket" || getprop("ro.build.product") == "Skyrocket" E: Error in /emmc/cm-10-20121024-NIGHTLY-skyrocket.zip
(Status 7)
Installation aborted
Click to expand...
Click to collapse
I also get status 7 when I tried installing CM9.
Related
after i posted here for my probloum i didnt get good answer there so i searched and they said u have install new rom , i downloded new rom and wanted to flash it but it give this Error:
Code:
assert failed: getprop("0ro.product.devices") == "crespo" || E:error in sd/card/m_crespo_full-88.zip (status 7) installation aborted
thanks.
cutiyar said:
after i posted here for my probloum i didnt get good answer there so i searched and they said u have install new rom , i downloded new rom and wanted to flash it but it give this Error:
Code:
assert failed: getprop("0ro.product.devices") == "crespo" || E:error in sd/card/m_crespo_full-88.zip (status 7) installation aborted
thanks.
Click to expand...
Click to collapse
What ROM are you trying to flash?
cyanogenmod.
thanks.
cutiyar said:
after i posted here for my probloum i didnt get good answer there so i searched and they said u have install new rom , i downloded new rom and wanted to flash it but it give this Error:
Code:
assert failed: getprop("0ro.product.devices") == "crespo" || E:error in sd/card/m_crespo_full-88.zip (status 7) installation aborted
thanks.
Click to expand...
Click to collapse
What ROM are you trying to flash? Did you do a full wipe? i.e. Cache, Dalvik
yes i did all ,now i installed new rom but its not load installed ROM and not going to recovery and give me triange logo error.
thanks.
cutiyar said:
yes i did all ,now i installed new rom but its not load installed ROM and not going to recovery and give me triange logo error.
thanks.
Click to expand...
Click to collapse
Did you flash a custom recovery image?
http://forum.xda-developers.com/showthread.php?t=988686
thanks all i folowed this thread to
http://forum.xda-developers.com/showthread.php?t=1007782
and re rooting and reinstalling recovery was work great.
thanks.
I try to update my nexus s gingerbread to ics but somethink go so wrong.. He stuck my phone at the loading screen..
I chose to format all my data..(Stupid)
So now my phone open at bootloader and i cant connect to my pc cause need to press the button thats say TURN ON USB STORAGE...
So can i connect my phone with some way and put the nadroid backup?
Skile1 said:
I try to update my nexus s gingerbread to ics but somethink go so wrong.. He stuck my phone at the loading screen..
I chose to format all my data..(Stupid)
So now my phone open at bootloader and i cant connect to my pc cause need to press the button thats say TURN ON USB STORAGE...
So can i connect my phone with some way and put the nadroid backup?
Click to expand...
Click to collapse
What recovery do you have installed - stock or Clockwork Mod?
I'm guessing it's Clockwork if you where trying to flash an ICS ROM, in which case you can access the SD Card from the mounts section of recovery, copy the .zip file of your choice to the SD then flash again - either stock GB or custom ICS.
Make sure you wipe all system/cache/data folders before flashing the next ROM.
We need more details
Turn off phone.
Turn it on with volume up+power button
Choose recovery
On storage choose mount usb, than put ROM you want, and flash it.
done
now need a good backup so anynone know where can i find ??
You should've made it yourself. It contains private information so don't even think about getting one from someone else.
You have to flash the ICS.zip ROM file through 'install zip from sdcard' menu.
Greetz
what files need to install?
only the ICS.zip ?
cause i try to many zip file but all says that aborted :/
Say that :
installing....
_Tweaked_v6_kwiboo.zip
Finding update package...
installing update...
installing update...
asser failed : getprop("ro.product.device)" == " "crespo" l l getprop ( "ro.build.product") == "crespo"
E:error in sdcrad/ics_mix_a9_ns_vrainmaster_twaded_v6_kwiboo.zip
Status 7
Installation aborted
Skile1 said:
Say that :
installing....
_Tweaked_v6_kwiboo.zip
Finding update package...
installing update...
installing update...
asser failed : getprop("ro.product.device)" == " "crespo" l l getprop ( "ro.build.product") == "crespo"
E:error in sdcrad/ics_mix_a9_ns_vrainmaster_twaded_v6_kwiboo.zip
Status 7
Installation aborted
Click to expand...
Click to collapse
Have you tried re-downloading the rom or trying another rom? Im on nexus s beam v3...
Sent from my Nexus S using XDA App
Skile1 said:
Say that :
installing....
_Tweaked_v6_kwiboo.zip
Finding update package...
installing update...
installing update...
asser failed : getprop("ro.product.device)" == " "crespo" l l getprop ( "ro.build.product") == "crespo"
E:error in sdcrad/ics_mix_a9_ns_vrainmaster_twaded_v6_kwiboo.zip
Status 7
Installation aborted
Click to expand...
Click to collapse
What version of cwm are you using? I had this when using 3.x.x, try updating to 5.0.2.0 using adb flash recovery <filename>.zip
adaimespechip said:
What version of cwm are you using? I had this when using 3.x.x, try updating to 5.0.2.0 using adb flash recovery <filename>.zip
Click to expand...
Click to collapse
i use 5.0.2.3...
I try all the ics rom to my phone but still say the same ...
Anyone know where is the problem?
Maybe cause i try to install ics 4.0.3 directly without install the previous update or official rom?
Skile1 said:
Say that :
installing....
_Tweaked_v6_kwiboo.zip
Finding update package...
installing update...
installing update...
asser failed : getprop("ro.product.device)" == " "crespo" l l getprop ( "ro.build.product") == "crespo"
E:error in sdcrad/ics_mix_a9_ns_vrainmaster_twaded_v6_kwiboo.zip
Status 7
Installation aborted
Click to expand...
Click to collapse
The error states that your phone is not crespo. I guess yours is a Nexus S 4G. Try the ROMs from Nexus S 4G Development forum.
You right...
My phone is nexus s 4g.
I install the rom of brainmaster ( MIUI NS4G 1.11.25)
correctly but i cant use my sim card...
Any idea what is the problem?
Skile1 said:
You right...
My phone is nexus s 4g.
I install the rom of brainmaster ( MIUI NS4G 1.11.25)
correctly but i cant use my sim card...
Any idea what is the problem?
Click to expand...
Click to collapse
Hmm... not sure 'bout that. But I would suggest trying to flash a full OTA ROM for NS4G first because it comes with a radio image (which may help fix the problem)
Same.
All the rom i have install to my phone have the same problem with the sim card...
Nexus 4g is a cdma phone. Why do you need a sim card?
cdma phone?
Say that mobile network not avaible..
Help plz is importand..
assert failed: getprop(“ro.product.device”) == ”
crespo” || getprop(“ro.build.product”) == “cresp
o” || getprop(“ro.product.board”) == crespo
E:Error in /sdcard/kwiboo-ics-v3-crespo4g.zip
(status 7)
Installation aborted.
i tried to install kwiboo-ics-v3-crespo4g.zip but as you see any help
note: i have rom manger ver 4.xxxx
http://forum.xda-developers.com/showthread.php?t=1354263 form i downloaded v3
i have nexus s not a 4g
Update your clockwork recovery to latest version
i did its 4.8.0.2 i think
new problem the phone don't even boot up it stops at google (in white) under it a pad lock
osos96 said:
i tried to install kwiboo-ics-v3-crespo4g.zip
Click to expand...
Click to collapse
osos96 said:
i have nexus s not a 4g
Click to expand...
Click to collapse
You know that you have a NS yet you are trying to flash a ROM for NS4G on it?
Anyway, to have you phone boot properly, flash a full OTA ROM for your phone model from the link in my signature.
firstly i am i9023 ok ? and i want a full ics rom that support usb and wifi because the kwiboo doesn't so plz fetch me one and btw im rooted and unlocked bootloader and accidently installed his 4g on my 3g so network don't work so i uninstall it and now im stuck with clockworkmod v3.1.0.1 and when installing kwiboo ics v3 crespo repack for nexus s 3g i have error status 6 not 7 its 6
thanx in advance
First download and flash the latest ClockworkMod recovery. Then download and flash the official ICS OTA ROM from the link in my sig.
So I am new to the One-S (Tmobile HTC Amaze), but not new to android or rom flashing. But I cant seem to get my new phone flash. Every time I try to flash a rom I get an error pop up and hope someone can help me out.
assert failed: getprop("ro.product.device") == "ville" || getprop("ro.product") == "ville"
E:Error in /internal_sdcard/cm-9-20120716-UNOFFICAL-ville.zip
(status 7)
installation aborted.
Click to expand...
Click to collapse
Please help....thanks
Because you are in the wrong section, these ROMs are nothing for your device as you do not own the Ville I guess
Whoops, but I did found the file on the forums here. HAHA
I do get the same error on MIUI.us_OneS_v4_2.7.20_Eng_Deo_ZipA_Signed.
TimSykes said:
So I am new to the One-S (Tmobile HTC Amaze), but not new to android or rom flashing. But I cant seem to get my new phone flash. Every time I try to flash a rom I get an error pop up and hope someone can help me out.
Please help....thanks
Click to expand...
Click to collapse
You have a one s or amaze? 2 different phones
Sent from my HTC VLE_U using xda app-developers app
TimSykes said:
Whoops, but I did found the file on the forums here. HAHA
I do get the same error on MIUI.us_OneS_v4_2.7.20_Eng_Deo_ZipA_Signed.
Click to expand...
Click to collapse
Dude like already mentioned you DO NOT have a Ville device. The ROMs in this section will not work for your Amaze. SMH
Did someone from Craigslist trick you into paying big money for an Amaze...?
My HTC one s (S3) won't flash a custom rom !
Hello , and thanks in advance .
I have a HTC one s (s3) and I was trying to install a custom rom .It's bootloader is unlocked and super user is flashed .
I was trying to install a custom rom (cm 10.1) using TWRP .I had successfully flashed super user .I have tried flashing cm 10.1 and pacman with the same result .I have done a system wipe so currently no OS is installed .However when I was trying to flash the rom It comes up with the error .
assert failed : getprop("ro.productdevice ") == "ville".
E:Error in sdcard/pac_ville4.2-milestone-ville.zip
(status 7)
Error in flashing zip /sdcard/pac_ville4.2-milestone-ville.zip.
Thanks for all the help !
opensourcegamer said:
I have a HTC one s (s3)
I was trying to install a custom rom (cm 10.1)
assert failed : getprop("ro.productdevice ") == "ville".
Click to expand...
Click to collapse
You're trying to flash a Ville ROM on an VilleC2 device.
There are two different One S models: the Ville (S4) and the Ville C2 (S3).
You have to flash an appropriate ROM for your device.
I got a Gal tab 2 10.1 in july and my mate said i should root it and pointed me to the How To] ROOT- Galaxy Tab 2 10.1 [GT-P5113 / 5100 / 5110 & 4.0.4 UPGRADE or OEM] post,
i followed it to the letter and was able to root my tab, "i still have no clue what i just did" anyways a few days ago i got a firmware update pop up on the tab so i tried to install it now its saying Signature verification Failed and update aborted.
Tried to unroot it from the dev post, notting happening still saying failed. here is what comes up when i try installing the new update
CWM- Based recovery v 5.5.0.4
E:invalid command argument
Finding update package
Opening update package
Verifying update package
E:failed to verify whole file signature
E:signature verification failed installation aborted
steddyeddie said:
I got a Gal tab 2 10.1 in july and my mate said i should root it and pointed me to the How To] ROOT- Galaxy Tab 2 10.1 [GT-P5113 / 5100 / 5110 & 4.0.4 UPGRADE or OEM] post,
i followed it to the letter and was able to root my tab, "i still have no clue what i just did" anyways a few days ago i got a firmware update pop up on the tab so i tried to install it now its saying Signature verification Failed and update aborted.
Tried to unroot it from the dev post, notting happening still saying failed. here is what comes up when i try installing the new update
CWM- Based recovery v 5.5.0.4
E:invalid command argument
Finding update package
Opening update package
Verifying update package
E:failed to verify whole file signature
E:signature verification failed installation aborted
Click to expand...
Click to collapse
You need to be running all stock software including Recovery. You are using a custom recovery.
p3113owner said:
You need to be running all stock software including Recovery. You are using a custom recovery.
Click to expand...
Click to collapse
How do i do that please ?
steddyeddie said:
How do i do that please ?
Click to expand...
Click to collapse
Just flash base firmware file via odin
Sent from my GT-I9100 using xda app-developers app
What if the base rom is a zip file instead of a .tar?
Thanks.
shinydesert said:
What if the base rom is a zip file instead of a .tar?
Thanks.
Click to expand...
Click to collapse
You extract the zip and there should be a .MD5 file for the stock ROM.
Oh boy,I am such a retard.....:crying:
Thanks man.
shinydesert said:
Oh boy,I am such a retard.....:crying:
Thanks man.
Click to expand...
Click to collapse
Your welcome! I had to figure that out for myself too, lol.