Hi,
I decided to install a custom rom on my tf300. But because this is my first time on android and im new to recovery flashing etc. i want a safe way.
Is there a program for the tf300 that flash the trwp recovery for me? So i dont do anything wrong.
I already searched the forums.
Thanks!
Related
Good Morning,
After searching all of 100 pages in the post for the Hydro rom I have a question that I didnt find in the thread.Im on latest JB/OTA update for my TF300t and I have flashed the CWM recovery after unlocking my bootloader.Now,I want to install the latest Hydro rom but the developer is suggesting the latest TWRP for the rom.
My question is,will i be able to flash the rom using CWM or do I have to use twrp?If so will i end up with a brick if i side load twrp along cwm?
The only place i didnt check is the youtube video instructions since im on a restricted network...
Anyone?
Im really itchy to flash the new rom I just need to know if i can flash both cwm and twrp or if it is safe with cwm already installed to flash twrp on top of it.
sapaira said:
Anyone?
Im really itchy to flash the new rom I just need to know if i can flash both cwm and twrp or if it is safe with cwm already installed to flash twrp on top of it.
Click to expand...
Click to collapse
It is an either or situation. There is one recovery partition and you can have stock, cwm, or twrp. You can't have more than recovery installed at a time.
There are a lot of issues being reported with cwm recently. Since the op says twrp I used twrp. It may or may not work with cwm.
Be aware that a backup made with cwm probably won't restore with twrp or the other way around.
Good Luck!
So, I'm looking to install TWRP over CWM. Due to me not properly reading into a ROM I attempted to push, my machine is currently boot looping. The ROM I flashed was a JB rom that I was flashing over an ICS ROM.
My question is this: Would it be safe to push twrp.blob via fastboot over CWM? If so, what version of TWRP would I grab? ICS or JB?
Sorry for the mess of information, still learning here!
Anybody have any thoughts or recommendations? I would appreciate it :S
nascentes said:
So, I'm looking to install TWRP over CWM. Due to me not properly reading into a ROM I attempted to push, my machine is currently boot looping. The ROM I flashed was a JB rom that I was flashing over an ICS ROM.
My question is this: Would it be safe to push twrp.blob via fastboot over CWM? If so, what version of TWRP would I grab? ICS or JB?
Sorry for the mess of information, still learning here!
Anybody have any thoughts or recommendations? I would appreciate it :S
Click to expand...
Click to collapse
I have used CWM during a long time, but now for the TF300, I have preferred TWRP which it's better as recovery (from my point of view).
And if your bootloader is JB you can use the JB TWRP blob, and if not use the ICS TWRP blob
Hey guys I'm an Android noob and a little confused. I've successfully unlocked, rooted, and flashed my Samsung Galaxy Ace by following step E here: http://forum.xda-developers.com/showthread.php?p=12874680#post12874680. At this point, it seems I'm ready to flash custom ROMs?? My question is, do I need to get Clockworkmod on my Ace if I want to flash ROMs or am I good to go as is and put files on my sd card, then boot into recovery mode, and flash from there?
If I do need CWM, how do I get it? I'm aware that I shouldn't use ROM Manager to get it as it will brick my Samsung Galaxy Ace.
Thanks, and sorry if this question has been asked by others already, appreciate it.
If you completed step E of that guide, you should already have CWM on your device. It replaces your old recovery, and without it, you wouldn't be able to flash a new ROM anyway. CWM also gives you the ability to back up device, in case you screw up you can quickly restore to a previous good image.
I have the Kyocera hydro xtrm, I've already rooted, and would like to install new Rom using Rom installer. But it seems that there isn't a Twrp recovery for my device, at least not that I can find. I would like to have a recovery available before attempting to flash new ROM. Can anyone please help?
Thanks, dannypipes9
I can't post links (<10 posts), so search Google for "Phil Z computer dependent", and the first link is the answer to your problem )
I saw that before some where, can you tell me more about it?
Sent from my C6522N
HI all
i was using my recalled tablet normally alongside with the other and at some point i decided to put on a custom rom.
Before this a friend of mine unlocked the bootloader , rooted the tablet and putted on it the CWM , flashing the nomoreota.zip
After a long period without any problems i decided to go on custom trying to flash the Blisspop first, then Dirty Unicorn and then another one i don 't remember.
The result was the same with every single one : black screen and nvidia logo and that was it.
I successfully flashed TWRP adn used it to install the roms but there was no different response.
Can anyone please help me ?
i wouldn t mind to go back on stock but i fear to brick my tablet due to the kill switch, so i prefer to go on custom to be invisible to nvidia servers.
Thank you for your help in advance
Any Ideas ?
up
If you change from a 5.x to a 6.x ROM, you need to flash the correct blob as detailed in the follwing thread
http://forum.xda-developers.com/shield-tablet/general/unofficial-update-original-shield-t3281541
You also need to install a 3.x.x TWRP.
If you still get into recovery and are able to flash roms, this is pretty much the only possible problem I know of.
njhuiz said:
If you change from a 5.x to a 6.x ROM, you need to flash the correct blob as detailed in the follwing thread
http://forum.xda-developers.com/shield-tablet/general/unofficial-update-original-shield-t3281541
You also need to install a 3.x.x TWRP.
If you still get into recovery and are able to flash roms, this is pretty much the only possible problem I know of.
Click to expand...
Click to collapse
thanks a lot. i will try it tomorrow