so i been trying constantly to install cm10 on my phone and i even tried some of the other roms based on it (pacman and JellyBam) but the phone loads fine and i get the the screen that sais to pick my language (obviously the first time i booted i got the "android is upgrading" stuff)
but on every rom i get like half way though the initial setup and my phone just shuts off but not actully off it just turn off the display and the keys but i cant do anything and i cannot turn back on without pulling the battery.
i managed once to get past the setup screen but then i got some FC's such as clock and keyboard. am i doing something wrong?
i upgraded from Stock GB and also tried from CM7 (stable) and also the cm7 works with the phone signal but every rom i flashed with cm10 i get no signal at all.
The solution is to install this: http://forum.xda-developers.com/showthread.php?t=2037287
Good luck.
xxvelorionxx said:
The solution is to install this: http://forum.xda-developers.com/showthread.php?t=2037287
Good luck.
Click to expand...
Click to collapse
o
how can we do that is the phone is rebooting ?
question. installing rls13 on verizon gs3. picked my own options. started loading rom and it stuck on installing aosp 4.2 keyboard. at 30%. can i restart phone or not. dont want to screw it up. flashed a lot but never had this happen. and yes i wiped
jjean0407 said:
question. installing rls13 on verizon gs3. picked my own options. started loading rom and it stuck on installing aosp 4.2 keyboard. at 30%. can i restart phone or not. dont want to screw it up. flashed a lot but never had this happen. and yes i wiped
Click to expand...
Click to collapse
Either hold the power button for about 10 seconds until it reboots, or pull the battery and boot into recovery. This is a problem with AROMA and it occasionally takes a few tries to get the flash done.
I think my daughters tablet has been soft bricked but im unsure of how to fix it.
It was running ICS i believe. We had two of the tablets(both bought at exactly the same time). I went to update them both and the first one downloaded and installed an update absolutely fine without any issues. The second one (the one in question) downloaded it but wasnt able to install the update. It just failed and reset the clock every time i tried.
I decided to reset it completely and was then going to flash the latest jelly official rom( onto it which i found here
http://forum.xda-developers.com/showthread.php?t=1704668
So i booted into recovery and wiped it and did a factory reset but then the thing just got stuck in a continuous boot loop.
So i wiped it again and now everytime it boots it just boots into recovery unless i specifically hold power and volume up to boot into download mode.
So i thought that was odd but i would just go ahead and put the rom on and maybe that would fix the issue. So i used odin and the jelly bean rom shown in that thread above
P5113UECLK7 (4.1.1) - Cellular south November 2012 (Official)
It all went fine it passed and i thought it would now work. I had to unplug the cable and it turn the thing on as it just started charging after completing instead of restarting and it did come up with a status loading bar as if it was going to do something but then it just turns itself off again after a few seconds and again when you try to turn it on it just goes straight into recovery.
The tablet is charged up to 100% but i cant get it to do anything else.
I tried using ICS instead P5113UEBLI1 (4.0.4) - Singapore September 2012 (Official)
but still the same. Not sure what else to do? Any suggestions would be much appreciated.
In Odin did you have the auto reboot option selected? I'm asking because I was in the situation as you..I flashed wrong cm10 ROM and it was just in a boot loop.. I let the battery run out and then I charged it while it was off. I downloaded the stock jb firmware(mine came with jb preinstalled) and flashed with only auto reboot checked nothing else and it worked..
Sent from my GT-P5110 using xda app-developers app
(backstory) Hi, ive had an Asus TF300T, for about 3 years now, unlocked, rooted it pretty early on... cycled between cyanogenmod and omnirom quite a bit, without really any major issues. Until today, i was running Cyanogenmods latest nightly build (CM11 Nov 5 2014), it worked just as any other nightly does a few bugs here and there, but nothing major and i hadn't done any major flashing or modding to the device. On my home from university, I turned my tablet off. And when i got home i plugged in the charger, and just as always the tablet turned on, showed the stock Asus screen, then changed to the Android boot animation... the animation then suddenly froze, and the device went into a boot loop... continuously... I dont know whats weong with it... tried to do a factory reset, i tried reinstalling the ROM, tried installing omnirom, but that got stuck on the OmniRom animation...
Im running Asus build 10.6.1.27.5
I had TWRP v2.7.0.1 installed but have now no longer works
id really hope there is a solution for this!
Thanks!
Edit: I dont know why, but when i try using fastboot or adb, the device isnt recognized. It doesnt show up on device manager either. I dont know if its the cable cause i bought it new, it says its can sync data, or a faulty charge/sync port....
razr9622 said:
(backstory) the tablet turned on, showed the stock Asus screen, then changed to the Android boot animation... the animation then suddenly froze, and the device went into a boot loop... continuously... I dont know whats weong with it... tried to do a factory reset, i tried reinstalling the ROM, tried installing omnirom, but that got stuck on the OmniRom animation...
Im running Asus build 10.6.1.27.1 (I know that theres a newer version 10.6.1.27.5, but when i try to flash it, the recovery says error and fails)
I have TWRP v2.7.0.1 installed but have now no longer works
id really hope there is a solution for this!
Thanks!
Click to expand...
Click to collapse
^THIS!
I was just to open a similar thread, then i saw your post. I join your request for help!
A month ago i have done a favor to a friend by unlocking his tf300t and installing CM11 on it. A few days ago he comes to me with this problem. I've tried anything but still no success:
- restore a backup done before flashing CM11 --> restore ends correctly but the problem remains
- flash a rom (CM11 and OmniRom) --> flash ends correctly but the problem remains
- flash the stock firmware found on asus website (WW_epad-user-10.6.1.27.5.zip, the SKU is correct for my version) --> the flash process stuck (i had to force restart the tablet after almost 2 hours of "flashing")
Since the boot animation changes according to the rom, i suppose the flashing process works. But the problem remains: after a few seconds the animation freeze and the device restarts, in loop.
Informations on the system:
- build 10.6.1.27.5
- TWRP v2.7.0.1 (working!)
- adb works (i managed to set /data as rw and push the .zip file to flash)
- fastboot should work
Please help! I feel a bit responsible for bricking my friend's device
SOLVED!
Finally!
I had already tried this method, before requesting for help, but the first time didn't worked... I don't know why this evening the tablet decided to collaborate:
http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
That worked for me! :victory:
Hi all,
Firstly I apologise for actually posting as I've spent a week trying to not be a twat and to fix it myself but alas I'm at the end of my tether.
OK I have a Tab 2 10.1 P5100 (thus with sim). I originally got it about 3 years ago in Poland and their OTAs are about as frequent as, well, they never happened. So, over the years whilst working there I flashed via Odin various official updates to get it up to scratch. Last one being Jelly Bean.
Everything has been fine until a week ago when suddenly it would boot, get to the log in screen, let me enter my pin, work for 10 seconds and then suddenly reboot. It's an endless loop but it's not stuck on booting up it just crashes ONCE started up fully.
It won't connect to Kies. Now, this is probably the rubbish cable (This is the third official cable in 3 years I've goe thru). The system restore option from manual booting does nothing and wipes nothing so I've been trying to just load an official ROM from the SD..that does nothing.
It starts to install and then goes back to the "no command" screen.
Can I simply download something onto the SD and install from there? the zip files I keep trying dont work.
Any advice is appreciated!