Slim Cyan 9
The most fluid CM9 available till NOW
Re Uploaded with errors fixed...
Hello all! I present to you, my 2nd attempt at ROM Modding (first on ICS)... thoughtfully named SlimCyan9.
Yeah, it is inspired by the SlimICS ROM available for SGS II.. but the OP has mentioned of no ports...
So i made my own! This is not in any way related to his ROM, which i have never used, because i'm not too rich!
I always prefer to thank some people first... as you may or may not know... And that is because im still learning stuff, esp related to compiling from source...
Thanks and credits:-
Sakindia123
Lirokoa
derefas
sherif maroon
akya
and some other people for guides on XDA...
Features:-
Based on CM9 #8 latest build by lirokoa sir
A tiny boot animation... 600 Kb vs 2.15 MB
SlimCyan Ringtone..
/system cleaned up a little
Gapps included...
Dark themed apk's like messaging, contacts, calender, news&weather, Apollo(with a black widget)
Xloud sound engine
Bravia contrast management
Supersmooth scrolls tweak
Darky zipalign, sdext booster, and all that good stuff...
Partial implementation of Project Butter. PARTIAL.
Forced GPU rendering for better battery
GPS tweak for faster locking
Some apks removed and some added...
Display density to 145
Themeing fix preinstalled, see the instructions for more
Centered clock and date
Lockscreen rotation enabled
Fling velocity and qualcomm specific tweaks
Dalvik vm heapsize optimized after trail and error
s2e included... See instructions for more
Zip is only 108 MB... with Gapps.. so quite slim. [CM9 without Gapps is 110 MB]
Zipaligned as default
Zipalign on boot for better memory
SuperUser removed. SuperSU included. Better suited for some apps, like dspoilt
Fling velocity, Friction, Max events/sec optimized after trial and error
Apex Launcher as default
Changelogs, if they ever happen,will be posted here.
A newer version is on my mind, but not before December.
Instructions and Tips&Tricks
Instructions:-
FOLLOW THEM AS IT IS OTHERWISE A FAIR CHANCE OF STRUCK AT SPLASHSCREEN OR BOOTLOOP
WISE PEOPLE CREATE A NANDROID BEFORE DOING ANYTHING
If you are on ANY CM9 build by LIROKOA:- (Group 1)
Reboot to recovery, Flash Slim Cyan 9, wipe cache, reboot.
If you are on any other ROM except lirokoa's CM9:- (Group 2)
Reboot to recovery
Flash Slim Cyan 9
Flash Original apk's .zip
Wipe Data/factory reset
Reboot
Finish the setup and everything...
Reboot to recovery
Flash ROM again. NO NEED FOR A WIPE NOW
Reboot
Post Flashing, Post Booting instructions:-
Since the DPI is changed to 145 to make CM theme engine compatible with nearly all the available cm9 themes,
Phone.apk keeps on crashing, when making or receiving calls.
The only feasible fix was using the included Jellybean theme.
So, Settings>themes>Jellybean> APPLY ANYWAY...
Run terminal to bring back the status bar... YOU JUST NEED TO RUN IT, any notification in status bar will do...
USB plugged message will do too!
Oh, and once you have applied the JB theme and rebooted your phone, EVERY theme will work properly without any FC on phone.apk.
Just don’t apply the Default system theme.
If you have upgraded from cm9 build, you may want to try the Slim Cyan ringtone.
This is set as default for people of the group 2
Optional is the Ubuntu Fonts pack, of which I’m a fan of... Flash via recovery, if you like open source too!
These fonts suit lower density better too! Roboto looks a bit pinched.
You need to Activate S2E if moving from any ROM not using S2E...
If you were using d2ext or ungaze or anything else, I’d recommend a clean install, EVEN if you were on cm9...
How to activate S2E:-
Make sure you are running a SD card partitioned via Yannou's recovery... I can’t help more than this.
Open S2E settings, Mount as ext4, set read buffer is optional.... works for me
Reboot
Reopen S2E... Options should now be available... tick em all and reboot.
Profit
If you are having problems in getting the device booted up, then the best advice from my side is, "GTF back to stock"
If you make a nandroid of Slim Cyan... IT IS POSSIBLE THAT because of handicapped systemui.apk, the phone may end up in a boot loop.
So I suggest you to download the original apk's.zip JUST IN CASE.
Want to make Slim Cyan even closer to the smoothness of Project Butter?
DONT USE ANY CPU-HOGGING APPS LIKE FACEBOOK OR WHATSAPP... BEST ADVICE!
Settings> Developer options> Show all ANR tick> kill app back button tick
Developer options> transition animation and window animation scale to 1.5x
Performance> CPU > Governor=interactive and set on boot tick
Performance> Memory> zRam> 18% or 26% and tick Purging of assets, if not...
Apex Settings> behavior> animation style> Jellybean
Reboot to slip on your phone...
I CAN GURANTEE that in stock Slim Cyan 9 Condition, after finishing the instructions and the tips and tricks, without using any bloat apps,
(For devs, without using terminal commands or any other funny things), YOU CANNOT HANG THE PICO.PERIOD.
At least, I was not able to do it...
Downloads
SlimCyan 9 v1 (Initial Release)
Download NOW
Optional link Here!Thanks Obilikas! :highfive:
Also download the attached Zip files. WHY? READ THE DAMN POST #2
Screen shots? Here you go...
I hope the link works.... PS:- Wallpaper is a pic clicked by me...
YouTube video will also be coming soon.. but will take time.
Became aware of the Gapps not included issue of cm and google... next version will not have included Gapps... Thanks!
Peace
great mate +1 looking forward to it
People posting issues like phone is crashing, rom is bootlooping, etc are:-
1) not humans
2) dont understand english
3) cant read/dont care to read instructions
4) trolls
Screen shots plz
Sent from my HTC Explorer A310e using xda premium
Waiting .... :fingers-crossed:
Post The Screenshots
Waiting....
Since you say that you have Gapps included, and , that the ROM is pretty slim, I would like to install and see how "slim" it is. Upload as soon as possible.:good:
P.S: Really hope there is a lot of free space too.
I am not removing what I wrote above but, I would like to suggest you to not include G-Apps in Cyanogen. Cyanogen is meant to be open-source. also, by including gapps, you are infringing the copyright of google.
How much internal memory after installed??
Sent from my HTC Explorer A310e using xda premium
Display density
So, does display density of 145 mean lowering of display quality than cm9#8?
And is the bluetooth bug which was eating the battery fixed?
Would love to try out the rom.
Its amazing that a phone like HTC explorer too has such a strong dev network!
Waiting too.
Does internet pass through available in this ROM?
nic work......:good:
Status 6 Error ...
See to it Aabhas Lall!
U can remove some ringtones to make rom more slim
Sent from my HTC Explorer A310e using xda premium
I had status6 error too
Extremely sorry folks, i uploaded a Test build...
:crying::crying::crying:
Re uploaded AND Confirmed working fine by Obilikas... :angel:
cant flash.. give error bad file system in recovery
You should remove the gapps and put it in an alternate zip if you don't want Google having you for lunch.
->Apollo And News And Weather Icon looks Cheep!!
"Cheep"!! -_-
Related
Hello everyone,
first i would like to say this ROM is Not my Own and I do not take credit for it this Wonderful Speedy As Hell rom is created by Sparksco I simply ported it over to HTC Magic 32A , and added a couple mods, now to the goodies
Video review of 1.6.1 here by blahbl4hblah:
http://www.youtube.com/watch?v=OjvmS-LCkEM
JOIN US HERE FOR DISCUSSION(IRC):
Join us on freenode #sparksmod http://webchat.freenode.net/
Features:
-OC/UV 614
-Automatic Apps2EXT
-Froyo DUH!
-Optimized Rom size
-Swap/Compache
-Cm6.1 Base
-No Ads
-Cool UI touch sound from Galaxy phones
-Fast,FAST,FASTTTT
and much more...
Requirements:
-OLD RADIO ONLY
-HTC MAGIC 32A
-EXT3/4 Partition
-a brain
Steps to Flash:
All SparksMod 2.3 instructions for wiping:
1. Put rom on your sdcard.
2. Reboot reboot to fastboot
3. fastboot erase system -w
4. fastboot erase boot
5. Power down device
6. Reboot recovery
7. Mount sdcard via USB and press Ctrl + H to see hidden folders on your sdcard. Delete the folder called ./android_secure
8. Unmount USB
9. Wipe EXT & Dalvik inrecovery
-Flash Rom
-Will Ask a bunch of questions, at this point try touching the track ball to get question to pop up
It will reboot its self
-Skip Setup
-Go to CMsettings
1.Application Settings- Allow moving.
2.Performance-Enable JIT--Enable Surface Dithering-Lock home in mem
NO NEED FOR SWAP , DONT TOUCH Compache either cause it is already running at 32mb
-Reboot
Seems pretty long, but this is what i did to get ROM working amazing sooo its worth it!!
Recommended ADW Settings:[/B]
1.Desktop Scrolling Speed-65
2.Desktop overshoot-45
3.Drawer Settings-Zoom Effect Speed-630
Credits
-SPARKSCO for rom
-JAguirre1231 for asweome ADW themes
-ezterry for port files
-pershoot for amazing kernel
-Cyanogen for awseome base
-Castway1 for icons in status bar
AND anyone else i missed please say...
DOWNLOADS
I OR ANY OTHERS ARE NOT RESPONSIBLE.......blah,blah
Full ROM
Sparksmod32A-2.3 ROM:
http://www.4shared.com/file/jj5xg17j/SparksMod32A-23-Ask_More-DS-Si.html
GAPPS Are In Rom , No Need For Seperate flash
Launcher Flashers
http://dl.dropbox.com/u/6775955/LauncherProRemovesADW.zip
http://dl.dropbox.com/u/6775955/AdwLauncherRMLauncherPro.zip
SparksMod32A 1.4 Changelog:
-Newer Source code for this rom, based off the nightly #251
-Optimized rom and gapps sizes even more! At first I didn't think it was possible!
-Added a ton of new wallpapers, all credits for SparksMod logo wallpapers go to Mjybarr
-Added a ton of apps, and updated the latest versions for all of them: Facebook, Maps, Street, VoiceSearch, XDA, Cache Cleaner, and Talk.
-Added Fancy Widget
-Added themed HTC IME
-removed launcherpro
and more...
*** MUST WIPE FOR THIS UPDATE,CHECK FIRST POST FOR NEW WIPE INSTRUCTIONS!
SparksMod 1.4.1
-New kernel by pershoot 2.6.35.9/better battery/faster/OC 614/UV
-New source code from latest nightly
-Updated apps
-New animations
-and some more inside changes
ENJOY!!
SparksMod 1.5
**Full Wipe**
-Went back to Stock, other than a few small changes like battery and window animations. The system partition is much smaller now, it seems my boot animation takes up too much space.
-PNG crushed entire /framework/res/drawable-mdpi (Optimized)
-Added new kernel
-Added youtube remote
-Added normal ADW 1.3.3
-Lastest Nightly
SparksMod 1.6
**Full Wipe**
-New base CM 6.1.0 Magpie by FireRat
-AutoDetect Kernel for 32A,32B,32B 2708
-Cleaner rom
-Optimized size
-New GingerBread Theme by Me & Castaway1
-Gingerbread keyboard
-New Animations
-Modded ADW to look like Gingerbread
-Much faster..
Enjoy...
SparksMod 1.6.1
-Stock Theme
-Flashable Themes
-Speeded up boot time, like the good old days
-Using full pershoot's kernel and kernel extractor (easier to overclock without battery drain when using a large swap file on the ext partition
-Removed some apps, just for the sake of Rom Size
-Added new Auto-Reboot to recovery after flashing rom, and Auto-Reboot to system after flashing the gapps
-Added a lot of custom scripts that help out the rom
-Added new market to gapps
-Will add more later if I'm forgetting anything
1.6.4 Changlog
- This rom was compiled from cyanogenmod's cm6.1.0-DS as a base, which can be seen here: http://wiki.cyanogenmod.com/index.php?title=Compile_CyanogenMod_for_Dream_and_Sapphire
- New apps2ext method, much cleaner and friendlier (you don't need a ext partition)
- Firstboot.sh removed
- Removed Firerat's AIO Patch. If you want to enable swap you need to go to his post and get it from there.
- Kernel extractor removed. This is using pershoot's kernel and the source can be viewed here: http://droidbasement.com/db-blog/
- New Market added, will try and post a pic of it soon, it's blue themed
- Speeded up boot time, and overall performance is faster and more stable
- Vm heap size changed to 32m default (Less settings to change on boot, but you can enable surface dithering just fine, as well as locking everything in memory)
SparksMod 2.0 Changelog
This rom was made specificly to be used with Rom Manager and Clockworkmod Recovery by Koush
-Apps:
Gapps to rom, but they install seperately from the rom itself to ensure a clean installation. No need to flash more than one thing
Zeam Launcher + Go Launcher, the GB Launcher seemed to be having some memory leaks, feel free it try other launchers from the market if you experience any lag issues over time
Rom Manager. You can use rom manager
Updated apps, android term, GB Keyboard, others, all free apps of course
-OpenGLES
I added a newer version to the rom to increase performance. I found it on this thread: http://www.xda-developers.com/androi...1-on-htc-hero/
-Wipe System to the rom
I added erase_image to the rom as a tool to wipe only the system partition before installing the rom itself. You will still need to select backup current rom and wipe data and cache with rom manager!
-New Ported boot animation from 144Saint, out new graphics designer , along with 2 new wallpapers, one of them is the new default wallpaper
-Added Added data/data bind script so your internal storage never goes down
Changelog Extended..
SparksMod 2.3 Changelog
1. Added more questions for users when flashing
Options:
-Davlik-cache to ext y/n
-Basic A2sd y/n
-Swap or CC ram usage options
-Data/data binds on ext y/n
-What kernel to install y/n
2. scripts are much more complex and check for more things, making it a much cleaner install with more options
Nice Port
Looks like you did well porting this over, it should get a lot of attention.
sparksco said:
Looks like you did well porting this over, it should get a lot of attention.
Click to expand...
Click to collapse
Thank you, Sparks , I'm not really a dev but I will try my best
Sent from my HTC Magic SparksMod using Tapatalk
I will help here as well when I can, I'm not familiar with 32A, but to this rom in general I'm okay haha and I'll help
blahbl4hblah said:
I will help here as well when I can, I'm not familiar with 32A, but to this rom in general I'm okay haha and I'll help
Click to expand...
Click to collapse
Thank you the more help the better!
On another note if anyone can help me porting this to the new radio 6. 35
It would be greatly appreciated!
Also if anyone wants to help out with the Rom, please ask I wanna get like a team going so we can keep this Rom alive;-)
can it turn off the ext3 on sd or install the rom without sd ext3? THAX
delenx said:
can it turn off the ext3 on sd or install the rom without sd ext3? THAX
Click to expand...
Click to collapse
Just don't partition the sdcard, then u can use the built in froyo apps2sd.
EDIT: you might come across some problems with out a partition, basically the launchers and a couple apps are installed on apps2ext on boot, so I highly recommend you make a partition , or else you'll be missing some key apps. If you don't want to use app2ext after wards then go to terminal app type:
Su
sh /system/etc/fr-patch141-BETA.txt apps2sd
Then you should get option to move all data/data apps to SD say no, then if you will get option to move apps to actual native apps2sd and say yes.
OR you can just use apps2ext so u don't have to do all that, and apps2ext is faster.
It is 32A,i hav flashed the rom，pretty cool，however i dont know why the home key havent any reaction when i pressed。
the home key doesnt work？
delenx said:
It is 32A,i hav flashed the rom，pretty cool，however i dont know why the home key havent any reaction when i pressed。
Click to expand...
Click to collapse
Is there no launcher like adw or launcher pro, if so look at post above.
Seems pretty cool and wait for NR version and multilanguage support. Thanks
delenx said:
It is 32A,i hav flashed the rom，pretty cool，however i dont know why the home key havent any reaction when i pressed。
the home key doesnt work？
Click to expand...
Click to collapse
It does work actually haha, go into cyanogenmod settings OR spare parts, I can't remember off the top of my head actually but yeah there should be the option for what you want the home button to do, for me its return to default home screen, same goes for the end
crisvillani said:
Thank you the more help the better!
On another note if anyone can help me porting this to the new radio 6. 35
It would be greatly appreciated!
Also if anyone wants to help out with the Rom, please ask I wanna get like a team going so we can keep this Rom alive;-)
Click to expand...
Click to collapse
I can't help you there because mines 32B haha, but IF someone wants to dare and have some lucky and do it then cool haha
I'm already on the ramhack for 32B so no need haha
EDIT: btw you might want to put in the op that you might be able to use the superwipe.zip to flash everything off the entire phone then do the normal wipe twice then flash rom, flash gapps and done haha
hello there
that one looks very awesome room specially the speed test
i'm dying here with my room cyanogenmod 6
no need to say what the hell i'm facing here
what ever ,,,
regarding " Partition sdcard 512MB/32 SWAP/"
is this what you recommend or we can increase the numbers ?
my sdcard size 16gb
and i think i'm gonna face problem when i need to read some thing arabic ,,, ya ?
any idea ?
how to get white notification?im sick of black
Saaheer said:
hello there
that one looks very awesome room specially the speed test
i'm dying here with my room cyanogenmod 6
no need to say what the hell i'm facing here
what ever ,,,
regarding " Partition sdcard 512MB/32 SWAP/"
is this what you recommend or we can increase the numbers ?
my sdcard size 16gb
and i think i'm gonna face problem when i need to read some thing arabic ,,, ya ?
any idea ?
Click to expand...
Click to collapse
Well KEEP swap at 32, as for the 512mb you can go higher I believe if your app crazy haha
pokgat said:
how to get white notification?im sick of black
Click to expand...
Click to collapse
go to the user interface and change some of the colors there
Very nice! Many thanks for this rom. Can't wait for testing. But... I must wait for a port to the new radio. Hope this will come soon
how is the battery working with this rom
i think battery is quite shorten..i got 70%-50% in 2 hours
It is built from cyanogen port from kabaldan. Synced on 21/3/11
This is the pre-final build with lots of changes and tweaks.
Here it is now for all CM6 lovers.
Donate if you like my work.
Change log (21-3-11)
Updated sources
New kernel (rare DSI errors)
Updated memory tweak.
Nexus S LW's are back.
MiUi camera added.
Moto Blur animations added.
Motorola Atrix sounds and notifications added.
Under clocked to 700 MHz.
DalvikVM changed to 42m.
WiFi scan to 160
Genie Widgets added back.
Many apk's updated.
Framework-res optimized..
Launcher pro added.
Honeycomb walls added.
Proprietary files update
Various wlan connectivity issues fixed (some N routers, wpa2, 801.x enterprise etc.), as in current CM7
Mods and tweaks-
AOSP Music/MusicMod 1.75.2 Built from Eliot Stocker source
ADBD-on boot
Reboot Menu in PowerMENU (with reboot to recovery, normal or bootloader)
Dalvik heapsize: 42m--dramatically improves performance!
windowsmgr.max_events_per_sec=60-> scrolling is smoother!
Hacks in media_profiles.xml:
Hack recorder at 30fps
hack bitrate audio / video
Camera Hack ---> Compression set to 100 (no compression) and increased memory footprint, the picture gains! (And thanks to the new gallery seems a different story!)
4 POINT MULTITOUCH SUPPORT FOR MILESTONE- abilited by a little hack in build.prop
media_profiles.xml adjustments (safer high camcorder profile h264 bitrate) + small camera fixes (sounds etc.) (thanks to kabladan)
- small agps fix (issue 295) "
- multitouch.distinct defined (fix Google Maps 5.0 rotation gesture etc.) "
- bluetooth discoverabilty timeout configurable (thanks H.Czedik) "
- modversion change to easily distinguish current build "
- etc.
- AAC and AMR Wideband audio encoders are finally working! "
- additional video quality camcorder profile added - "middle" (customize it in /etc/media_profiles.xml) "
- Camera app - fixed encoder change from UI not being used until camera reinitialization, camcorder shortcut added "
- adjusted smartass governor defaults "
BOOT SCRIPTS-
The script that will start to boot, are located in the /system/etc/init.d, and are simple script with no extension (info for whoever want to add / edit the script)
1-Sysctl-support tweaking the kernel! instead of creating a script where you write tweak using "sysctl-w" now using "sysctl-p" reads the sysctl.conf file in /system/etc
Zip align script.
Auto boot recovery.
4-Overclock-overclock the cpu+ memory tweak
5-adbd_during_boot-adbd to boot the adb shell directly as root! (updated)
Removed lots of bloat-ware to make it fast and smooth!!
Lots of other tweaks under the hood!!
Important:
Please, use the new OpenRecovery 1.46 for installation.
The Androidiani OR has been updated to be based on 1.46 (in version 3.3), so it's recommended too.
Non European radio files can be installed from menu in Androidiani OR.
Download-
Code:
http://www.androidnerds.net/forum/viewtopic.php?f=502&t=102
Google Apps should be download from here-
Code:
android.d3xt3r01.tk/cyanogen/gapps/gapps-hdpi-20101114-signed.zip
New market (2.2.11) for iceandfire rom (Thanks to HO!NO!)(I did a little modifications to his market update)
Download this update file new_market.zip and traditional_market.zip
copy them in openrecovery update folder
Go Settings > Applications > Manage applications and click on the Running tab.
click on Google service framework, Force stop it and clear data and cache
go back in all tab and click on market, do the same (Force stop clear data and cache.
reboot in recovery
install traditional_market update
wipe dalvik cache and cache
reboot
open market (accept User Agreement) close program (do not wait for program to open)
reboot in recovery
install the new market update
reboot
and now you should have the working new market 2.2.11!
Code:
http://www.multiupload.com/2XOMDYB5AV
http://www.multiupload.com/B8AE2AKTKQ
Theme pack-
Note- Install ADW launcher to use these.
Package includes-
1. tron
2. gingerbread
3. gingerbread blue
4. MIUI
5. Symbian
Ill Update more when i get'em!!
http://www.multiupload.com/YVQF4UQRCI
Gingerbread theme(thanks to sileshn)-
Code:
http://forum.xda-developers.com/showthread.php?t=928678
Gingerbread theme from iceandfire v1.0.1-
Code:
http://www.multiupload.com/9XM0MXQNTK
MiUi music for iaf roms-
Code:
http://www.multiupload.com/LR4YAKL8NL
iceandfire rom v1.0.2 theme- (thanks to loveboatcaptain)
http://www.multiupload.com/BCHGJLL62N
Downloading and will report back in a few hours.
Great! Its looks fantastic! A mix of CM and FryoMod!
Thank you! Just a little request: Could you set your rom up to be SBF-less? As any other 2.2 roms out there is since 1 month ago... Thanks in advance
marcelus said:
Great! Its looks fantastic! A mix of CM and FryoMod!
Click to expand...
Click to collapse
anyway,seems very complicated.
thank you.
what's the diff in this rom and cyano/froyomod rom?
Removed many bloat ware.. Some under the hood customizations.. gingerbread theme pre-installed!! some tweaks from both CM/froyomod and some other nexus one and htc roms!!
Can anyone tell about battery backup...... coz there is not much battery backup in modified roms as process keeps on active even phone is locked and consumes more battery....... is there any method to stop them plz tell....
Check it again it is there how to fix that...
Sent from my Milestone using Tapatalk
Is the launcher2.apk.1 a leftover? Same for the Music.apk.1
because it is easily taking up around 4 megs of space.
looks good
Ill test this rom and report back tomorrow bro
In other words you have choose the best of both rom.
Ifiuse said:
In other words you have choose the best of both rom.
Click to expand...
Click to collapse
Yes but added and removed some stuff too..
Sent from my Milestone using Tapatalk
Ummm...did you read my post?
Great rom but the batterylife sucks. I know the reboot trick but its still bad. I'm going back to Telus mod.
bloodhawk said:
Ummm...did you read my post?
Click to expand...
Click to collapse
actually that came with sync.. so i cant really say anything about it!
DrZippit said:
Great rom but the batterylife sucks. I know the reboot trick but its still bad. I'm going back to Telus mod.
Click to expand...
Click to collapse
Thats the problem with LEAKED kernal so i cant really help about it and ya even CM is a batttery hogger!!
iceandfire said:
actually that came with sync.. so i cant really say anything about it!
Click to expand...
Click to collapse
As in?
because both these apps are taking around 8MB of internal memory...
I did delete them.. without any issues. So it would be better if you delete them from the next release. To add some more space
bloodhawk said:
As in?
because both these apps are taking around 8MB of internal memory...
I did delete them.. without any issues. So it would be better if you delete them from the next release. To add some more space
Click to expand...
Click to collapse
The next release is AOSP based and already in works, ill take care of these two files and others!!
PUREGANDROID
(pure google android)
This is as close as i am able to get to pure android it is a CM7 rom but most of the CM apps are removed (except for one widget) and it has the Nexus S background as default. All Google Apps are included !!!!
This is my first rom please tell me if you like it and i will continue my efforts to remove even more of the CM apps (widgets).
I TAKE NO RESPONSIBILITY FOR DAMAGE or LOSS of DATA
Download::::
dl.dropbox.com/u/27168952/PUREGANDROIDV0.2.zip
Message me if this doesn't work
FLASH THIS ROM AS YOU USUALLY WOULD
BACKUP
WIPE DATA
FLASH CWR
RESTART
**** I COULDN'T POST THIS UNDER DEVELOPMENT BECAUSE I DON'T HAVE ENOUGH POST*****
Can you post some screenshots?
Screenshots would be ideal.
I will be brave and try
Sent from my Desire HD using XDA Premium App
Screen shots
here they are
The only things that remain from CM7 is the CM setting in settings (need to see how to remove) and the fist widget ( Hint Widget)
Did you compile this yourself from source or just remove some stuff from /system/app.
deleted the CM apps recompiled and replaced Livewallpapers and bootanimation
I am working on removing CM settings from Settings Menu and the CM widget that first comes up.
Also working on GPS.conf to make GPS lock faster for people in North America and other countries will follow
nerdkiller14 said:
deleted the CM apps recompiled and replaced Livewallpapers and bootanimation
I am working on removing CM settings from Settings Menu and the CM widget that first comes up.
Also working on GPS.conf to make GPS lock faster for people in North America and other countries will follow
Click to expand...
Click to collapse
recompiled or rezipped?, big difference. if you changed cm7 (downloaded the source code, made your changes, set up your toolchain, build the rom and kernel, etc), then compiled it your linux info will be in about phone in settings, not cyanogen. what im getting at is if you didnt make changes to the source code before you compiled it in linux, why not just make an update.zip for those already running cm7 as an add on, instead of people wiping and reflashing something that their already running, with only minor changes.
You must wipe to have live wallpapers be changed and have boot animation be changed. I didn't have the time to change the kernel and everything else. This is just a beta to see if people like the idea and want me to continue in the same direction eventually it will
have its own kernel and be more seperated from CM
okey dokey.
nerdkiller14 said:
You must wipe to have live wallpapers be changed and have boot animation be changed. I didn't have the time to change the kernel and everything else. This is just a beta to see if people like the idea and want me to continue in the same direction eventually it will
have its own kernel and be more seperated from CM
Click to expand...
Click to collapse
I give you credit for trying something like this. I wouldn't know where to start lol
test it out please tell me if you like it
If you can make a O/C kernel that i could build into this Rom that would be great!!!
PS: I like the one for the captivate.
You call this pure android but you're using the ADW launcher like cm7 is. Drop ADW and put the stock gingerbread launcher. Ultimate Droid is based on cm7 but it uses the stock gingerbread launcher and is so much faster and has better battery life than cm7. Take a note from their book, and good luck.
Where can I get the stock launcher I have looked every where on the internet??
Got the stock will be put into V0.3 tomorrow
Im having a problem when I put Launcher2.apk and remove ADWlauncher.apk I get 2 options on the first boot (Setup Launcher, or com.android.provision ) and when I select setup Wizard it bootloops.
@ OP. Now that you have reach to the 11 post limit you can post links. I will also move your thread to the dev section but first you need to change a little bit your first post with more info as many other chefs do it. Can you look up in other rom threads for a more consistent information? Thead naming..info related. Just the basics.
Thanks,
nerdkiller14 said:
Im having a problem when I put Launcher2.apk and remove ADWlauncher.apk I get 2 options on the first boot (Setup Launcher, or com.android.provision ) and when I select setup Wizard it bootloops.
Click to expand...
Click to collapse
When I was running CM7 I removed ADW and installed the stock launcher via the first link in this thread: http://forum.cyanogenmod.com/topic/15106-mod-universal-022611-cm7-gb-stock-launcher-cm7-gb-mod-30/
Take a look at what the package does and maybe you'll be able to figure out how to do it.
I don't know if you can help but ever since replacing ADW with Launcher2.apk I get boot loop at the setup screen even when flashing regular cm7
Hi,
I have been in contact with Bertans through his LEANdroid thread and through private message and we have been working on a bit of a mod for LEANdroid. Basically people want OC/UC and the rest of the goodness from other roms.
It is a mod of LEANdroid 11.10.2 and has a few extra bits over and above that rom. Now has a kernel custom compiled by me from aorth's kernel source.
Includes:
LEANdroidMOD_6
-2.2.2 Thailand rom base, newer and has the mystical .2 instead of .1!
-NOMA kernel from before
-Custom Ubuntu and Jura fonts because they look better than the ugly android ones
-Not compatible with previous 2.2.1 releases (up to LDM 5)
-This is for testing, not sure if it is compelling enough as an upgrade over LDM5 as I am going to include fonts in LDM 5 too.
-Still has old market, but it will auto update, may update it in a future release.
-Has XDA anti malware patch set up in installer.
LEANdroidMOD_5
-Custom kernel based of NOMA source
-Very custom smartass cpu profile setup, seems fast and battery efficient
-24/12/12, now has Ubuntu and Jura fonts and XDA anti malware patch in installer
-Otherwise similar to before
Previous
-Android 2.2.1+ LEANdroid 11.10.2+
-OC/UC 30mhz to 691mhz. Defaults to 30mhz and 600mhz- Fusion Kernel.
-Smartass and interactive governers. Default is ondemand.
-164MB free space.
-Some custom sounds.
-Fusion kernel 122mhz and 600mhz by default.
-Busybox
-NOfrills cpu control installed by default.
-Tweaked memory management
Everything that worked on LEANdroid should still work up to LDM 5 but it has a more spicy kernel and a few more tweaks. Please backup first as I cant be responsible if it doesn't work or you lose stuff. As these builds are just LEANdroid with a different kernel and a tweak or two, you should be able to get away with just flashing it over your existing LEANdroid install and just wipe cache and dalvic cache.
Download:
LEANdroidMOD_6, 2.2.2 base with everything back in /system directory to see if wifi can work for people.
Download: http://www.mediafire.com/?x8avapvmqlr78y6
MD5: 231D186B7A39E4D0588881A441AAE91F
LEANdroidMOD_6, 2.2.2 base
Download: http://min.us/mbomINMMtE
MD5: 377C8B6E01504BCF054126029BA1C223
LEANdroidMOD_5, 2.2.1 LEANdroid base
Download: http://min.us/mC8N9JhJE
MD5: F70D5C4BCB3F5BF0900F80E0B0FCB97C
Original Thread: http://forum.xda-developers.com/showthread.php?t=987736
Install
Install procedure:
-I installed Clockwork Mod recovery from rom manager which is the 3.0.2.4 version.
http://forum.xda-developers.com/showthread.php?p=13264607
http://forum.xda-developers.com/showthread.php?p=12619750
Reboot after install and hold volume up and green call button then push the power button > hold vol up and green call until recovery menu comes up > wipe user data and cache as well as dalvic cache in advanced menu > choose install zip from SD card and select whichever LDM release you are using. Once it is installed, reboot the phone and you should have a shiny new LDM install.
Thanks
-Bertans for rom base and help
-Androcheck for task killer help
-Dsixda for Kitchen
-aorth for kernel source and answering my annoying questions!
-NOMA Kernel Thread: http://forum.xda-developers.com/showthread.php?t=1228715
Kernel:
Source: https://github.com/PaulMilbank/kernel_huawei_u8150
Hocaeit Kernel 691mhz: http://min.us/mYEQMfD42
Flashable kernel 691mhz: http://min.us/mQYYzixNJ
Flashable kernel 729mhz: http://min.us/mVebnFefs -have not tested yet.
http://www.mediafire.com/?j7fvexu9h1odq
Cheers,
Paul
Looks Good!
Great job - I'm excited - will try tomorrow. What keyboard and launcher is this running?
I will try it (I am excited about it).
Still dun understand why everyone say about abd driver in install procedure when all is done on phone and phone sdcard.
Is running standard android keyboard and launcher pro just like LEANdroid.
Think the adb part is just to get clockwork mod on there. You can also use rom manager if you want, although that seemed to be playing up last time I installed it. if you play a bit more you can also use fastboot, but I have not tried that yet. Im still running CWM 3 installed ages ago using rom manager.
Any idea how to get extended "Phone options" when i press power button.
Like reboot, etc not just the 3: Silent, Airplane, Power Off ??
Thx.
It is something to do with custom frameworks. Have not explored that much as yet. Trying to get the kernel good and fast for a start and then can look at custom looks for later.
Hangs at Android logo
I had just finished flashing LeanDroid when I noticed your (what I like to call) "LeanDroid on Steroids" (on Steroids due to being overclocked). I had been thinking if I were to right a ROM, this would be it...so...I was jazzed. I spent all day trying things over and over and can't get it installed. It just hangs at the "Android" screen. I had to install something so went back to regular LeanDroid and installed it again with no problems. I did everything you suggested including the wipe and the new CWM to no avail. Did anybody else get it installed?
Oh, ok... interesting. will have to do a wipe and flash and see what is going on at some stage. Have been developing it as I go on my phone, so possibly it works as I have been flashing kernels and such over existing builds.
Has anyone else had this problem?
Does CWM give any errors with installing?
Im guessing you are reasonable experienced with flashing, but how long did you leave it for on the android screen?
is this the android animation screen or the boot splash?
Does the MD5 hash match?
Thanks for helping test this, hopefully can get some more info and testing done to work out what is going on here.
heh, just flashed it from fresh and no dice, boot loop. trying to suss it now.
Going to upload a more basic build which is just leandroid+ kernel. Just tested on fresh install and it boots fine. Link will be updated in the first post.
Paul
Ok, take 2... try the new mod which is in the original post. It is straight LEANdroid+fusion kernel.
CWM gives no errors. Not heavy enough to know the meaning of "MD5 hash match" but also not fresh out of the box; I gave it at least 5 minutes on the "Android" screen (don't know if that's called the animation or boot splash); regular LeanDroid takes almost exactly 2 minutes so I thought 5 should be long enough. Will try the new one now. If doesn't work it will take me a little while to get back to you about it because I'll have to reinstall a working ROM so I can connect and reply. Here goes.
PS: I'm not doing this for fun; I just wanted a fast & lean ROM because I found myself demanding a lot of my little IDEOS and she was getting intolerably slow...am I'm really exhausted from trying to come up to speed on all this over the last few weeks...so...I want to be finished with this now...so...when you do any future updates (in gratitude for my help ) if it's even possible, could you please make sure it catches this LEANdroidMOD_2 so I don't have to do anything else to have your final version? I'd really appreciate it. Here goes. I'll let you know what happens.
OK. It loaded. Took 2 minutes just like plain LeanDroid. I went straight to the app drawer to play with NoFrills but it's not there. I realize you probably "lightened" this one as a troubleshooting tool to get her working. I just installed NoFrills and it does offer the 691MHz of the custom kernel. Sorry for asking you to educate me but:
1. Is it very advantageous to have NoFrills (or any desired apps) built in to the ROM instead of installed separately and if so, why?
2. Should I go 691, 122, ondemand, & deadline or what?
3. Should wait before I start heavily customizing my homescreens with postits, etc. because this prelim version won't be updated?
4. Is there a way to update to a more final version without losing my homepage customizations?
Thanks for the (I say best) ROM and any educating you give.
Hey Paulynator, thanks for your patience. Leandroidmod_2 was a very quick build to get things moving as I had to build something to get my phone working after the first rom didn't boot in testing! Will upload another build with busybox by default and a couple of small mods today. Problem came from data/app, so ditched that and put apps into /system/app.
Questions:
1)Not really, I just like it, others may prefer setcpu or something else instead.
2)You go with what you feel happy and doesnt crash your phone, try 652 and 60 first, then go higher and lower if it is working fine. Just leave apply on boot unchecked in nofrills until everything is working fine. Ondemand and deadline will be fine.
3)Updates should be able to be installed without a wipe.
4)Just install zip in CWM over your install, sorry, I cant promise anything though.
Thanks
Paul
Ok, take 3. everything from 2+busybox and some custom bits. Tested on my phone and it boots fine with a total wipe. Hopefully wont need to do a total wipe, but have not tested flashing over an existing install.
For question #1, I didn't mean NoFrills as opposed to SetCPU or something else; I'm asking if it's very advantageous to have desired apps built in to the ROM instead of installed separately and if so, why?
Paul,
Report on LEANdroidMOD_3 (a.k.a. LeanDroidOnSteroids, c'mon, it rhymes!) (or even "cleaner": SteroidLeanDroid. If I say so myself, awesome title for an awesome ROM...to me.)
Installed over version #2 w/o wipe seems to be ok...to the extent that I started the process of recluttering (restoring) my Ideos as though "she's a keeper", i.e. no more wiping; the records stay intact from now on.
Paul
---------- Post added at 05:55 PM ---------- Previous post was at 05:47 PM ----------
Sorry to hit you with 3 since your last but since we have a "hard"/permanent Home button right below the screen, is the redundant one at the bottom of the app drawer removable from a menu or would I have to mod the rom to remove it?
Paulynator said:
For question #1, I didn't mean NoFrills as opposed to SetCPU or something else; I'm asking if it's very advantageous to have desired apps built in to the ROM instead of installed separately and if so, why?
Click to expand...
Click to collapse
Doesnt matter one way or the other, I just liked it built in. Only possible advantage is that some apps in /system/app wont use space in /data/app, but this is lost the moment you update them as updates seem to install into /data/app. So my Leandroid with nofrills in /system/app still gives 164mb free space in data partition until things get updated.
Good work, thanks for the update that it can be installed over a previous install.
Home button is part of launcher pro. on the home screen, hit menu>preferences>appearance settings>uncheck home button on app drawer.
Paulynator said:
Paul,
Report on LEANdroidMOD_3 (a.k.a. LeanDroidOnSteroids, c'mon, it rhymes!) (or even "cleaner": SteroidLeanDroid. If I say so myself, awesome title for an awesome ROM...to me.)
Installed over version #2 w/o wipe seems to be ok...to the extent that I started the process of recluttering (restoring) my Ideos as though "she's a keeper", i.e. no more wiping; the records stay intact from now on.
Paul
---------- Post added at 05:55 PM ---------- Previous post was at 05:47 PM ----------
Sorry to hit you with 3 since your last but since we have a "hard"/permanent Home button right below the screen, is the redundant one at the bottom of the app drawer removable from a menu or would I have to mod the rom to remove it?
Click to expand...
Click to collapse
Just found a possible glitch. Don't know if it's the ROM so tried the obvious things to no avail. The camera app (any camera app; I tested the problem by downloading and trying others) won't access the gallery. In the stock app, the little preview window (that tapping opens the picture in the main window) won't open the picture. It gives an error message saying "app initialize failed. please download the app from the market". The app isn't in the market so I d/l'd 2 other camera apps and they both did the same. Using Root Explorer to try to open a picture also wouldn't work. Could you please try to access the gallery on a phone you've installed your ROM on and let me know if it works? I'd appreciate it. Thanks.
Works fine on mine. Try go to the market and update Quickpic. It does not like being in /system/app so if you update it, it should work. It was one of the reasons I tried to put it in a data/app from the start, but that caused bigger problems like the rom not booting.
I could also put the stock gallery back in alongside quickpic if needed but it does not have multitouch.
HI GUYS...TODAY I AM PRESENTING THE FIRST WINDOWS PHONE (WP8) BASED ROM EVER MADE FOR MICROMAX A110 CANVAS 2:highfive: I WONT SAY THAT THIS IS THE BEST ROM MADE TILL DATE BECAUSE IT DEPENDS ON OWN TASTE.BUT YES THE ROM WILL NOT DISAPPOINT YOU FROM ANY POINT OF VIEW...WETHER YOU ARE A HARDCORE GAMER OR A CASUAL ANDROID USER WHO DEMANDS FEATURE.
DOWNLOAD LINK OF BLACKPEARL ROM V1.0:
if you are viewing in mobile than for downloading click here
(please read the following instructions mentioned in 5th post to extract best of the rom)
INSTRUCTIONS FOR INSTALLING THE ROM
1.boot into recovery mode by holding power button+volume up button+volume down button.
2.then wipe data/factory reset ,wipe cache partition.
3.go to advanced menu and wipe delvic cache
4.then go to mounts and storage and select format system
5.now select install zip from sd card.choose zip from sd card.
6.locate and select the rom's zip file.
7.after flashing reboot the phone and enjoy the new experience
THOUGH VERY RARE BUT... If in case you get only 150-160mb ram free after 2 days of usage than pls take backup of imp. things like contacts, apps and simply reflash the rom. And i assure you an awesome performance. And if you can then spare about 10minutes to increase the performance of rom via swap and kernels...all mentioned below in 5th and 6th posts....they are simply toooo easy.
FEATURES
.no bugs at all.TOTALLY BUG FREE...
---.WP8 LAUNCHER WITH LIVE TILES AND DIFFERENT THEMES SUPPORT
---.WP8 LOCKSCREEN
---.WP8 CONTACTS
---.WP8 DIALER(and logs etc etc..obiously
---.WP8 MESSANGING
---.WP8 RINGTONES
---.WP8 WALLPAPERS
---.WP8 STATUS BAR(OPTIONAL)
---.AWESOOOME TRANSITIONS from google nexus 7...AND YOU WILL LOVE IT
---.ANDROID BOOT LOGO
---.PRE LOADED KERNEL (NO NEED TO ADD BOOT.IMG)
---.A SPECIAL BOOT ANIMATION OF COMBINATION OF WINDOWS AND NEXUS
---.4.2 NOTIFICATION BAR AND LINDROID NOTIFICATION BAR BY PATCH PROVIDED BELOW.
---.4.2 KEYBOARD WITH SWIPE GESTURE
---.4.2 CAMERA
---.4.2 GALLERY
---.FLOATING YOUTUBE LIKE MULTI WINDOW
---.SONY XPERIA WALKMAN FOR AWESOME SOUND QUALITY ACCOMPANIED BY VIPER4ANDROID
---.PRE-INSTALLED XPOSED INSTALLER
---.XPOSED APP SETTINGS TO CUSTOMIZE YOUR APPS THE WAY YOU LIKE
---.HTC SENSE STYLE RECENT APPS
---.SEEDER PRE-INSTALLED TO BOOST PERFORMANCE
---.S MEMO AS A COOL MEMO APP
---.GOOOD BATTERY BACKUP
---.PRE-ROOTED
---.DELETED ALL BLOATWARES AND RAM CONSUMING APPS
---.INTERNET SPEED SHOWN IN STATUS BAR(WITH THE HELP OF 4.2 NOTIFICATION BAR PATCH OR LINDROID NOTIFICATION BAR PATCH PROVIDED BELOW)
---.50FPS+
---.added init.d support
---.AROUND 200MB RAM FREE(CAN INCREASE TO A GREAT EXTENT WITH THE HELP OF BELOW TUTORIAL MENTIONED IN 6th POST)
---.INTERNET SPEED TWEAKS ADDED
---.BATTERY TWEAKS ADDED
---.SEVERAL PERFORMANCE TWEAKS ADDED IN-BUILT ROM. NOW NO NEED TO FLASH ANY GAMING PATCH OR 60 FPS PATCH....ALL TWEAKS ARE IN THE ROM ONLY
---.ADDED BUILD.PROP TWEAKS
---.CHANGED NAME FROM MICROMAX A110 TO SAMSUNG GALAXY S3 FOR GAMERS....HENCE INCREASING THE COMPATABILITY OF GAMES LIKE BACKSTAB
----.SECOND ROM (AFTER BUMBLEBEE) TO FIX UP THE ERROR OF USSD TONE RINGING. i.e. NOW THE PHONE WILL RING ONLY WHEN YOU WANT AND NOT WHEN IT WANTS..
---.REALLY AMAZING PERFORMANCE. HAVE TESTED THESE GAMES...WORKED FLAWLESS
1.SIX GUNS
2.SHADOW GUN
3.NFS MOST WANTED
4.FRONTLINE COMMANDO D-DAY
5.VIRTUAL TENNIS
6.REST YOU TELL ME AND GIVE FEEDBACK
---------------------ANTUTU BENCHMARK SCORE=8726!
---------------------QUADRANT BENCHMARK SCORE=3300(APPROX)
Click to expand...
Click to collapse
I HAVE TAKEN STOCK ROM AS BASE(but i assure you that you will not in any case feel stockish) AND THE ROM CONTAINS STOCK KERNEL IN IT(thus no need to add boot.img in the package).
PLEASE HIT THANKS TO MOTIVATE ME...IT IS TOTALLY FREE..
CREDITS..
I WANTED TO SHARE ROM CREDITS WITH THESE GREAT DEVELOPERS...
....my parents
for allowing me to make a rom during my exams:cyclops:
....my brother
for various ideas and inspirations
.... @khan_frd2002
.... @BOND1987
.... @ravi923615
.... @Joseph Canvas
.... @andiroxu
.... @bindassdost
SCREENSHOTS:
where is rom link ?
Reserved
Tricks and patches to extract the best out of rom.
GUYS MAKE SURE THAT YOU FLASH FIRST TWO PATCHES TO EXTRACT THE BEST OF BLACKPEARL:good:
ALL THESE PATCHES ARE SIMPLY TO BE FLASHED VIA CWM AND NO WIPES ARE REQUIRED WHILE FLASHING THESE...(in case if you are stuck at the screen showing starting apps then simply reboot it again or wait for 1-2 minutes and everything will be solveD...SO SIMPLE!!
====FIRST OF ALL DOWNLOAD AND INSTALL BUSYBOX FROM HERE
OPEN IT AND SELECT NORMAL INSTALL. THEN CHOOSE NORMAL INSTALL.REST WILL BE DONE BY APP ITSELF.
THEN FOLLOW THE EASY 'TWO STEPS' PROCEDURE TO INCREASE RAM BY MAKING A SWAP FILE OF 300MB MENTIONED IN BELOW POST.
...CHEERS FRIENDS
SOME OPTIONAL PATCHES....
SOME OTHER PATCHES ARE:::---
NOTIFIACTIONS BARS OF DIFFERENT STYLES BY@BOND1987
1.LINDROID NOTIFICATION BAR PATCH
2.4.2 NOTIFIACTION BAR PATCH
====TOUCHWIZ LAUNCHER...
====STOCK 4.1 CAMERA+GALLERY PATCH.. IT WON'T REPACE YOUR 4.2 CAMERA OR GALLERY APP BUT EXIST AS SEPARATE APPS..
====STOCK ANIMATIONS(before downloading it just tell me reason for flashing this? its quite useless:silly:http://d-h.st/MTS
====DPI CHANGE: You can change the dpi of blackpearl rom simply by using this app from HERE
Just Type the desirable dpi and reboot.
------Further guys you may go to theme in launcher settings and turn on jump animations and also then go to developer settings and set all the three animation scales to 0.5. It will make animations even more awesome.----------
SOME OTHER TWEAKS..:beer:
Open seeder app.
Give su rights when prompted. Then tick the following things
~enable Seeder
~suspended rng service when screen off
~extend i/o queue
~start automatically on boot
THEN SET THE PROFILE TO AGGRESSIVE
Now close the app. You are done with seeder....
After this open xposed module and select install/update. Then go to right tab(i.e. of modules) and tick app settings.
Reboot your phone now.
After reboot open viper4android.
It will ask you to install drivers.
Select cortex a8 with neon and reboot.
With this your phone now has ever more better performance and more cool transitions and all plugins are properly installed.
Enable swap and increase ram--an easy way
SO GUYS ASSUMING THAT YOU HAVE JUST 2 MINUTES FREE FOR THE PERFORMANCE OF YOUR PHONE....WE WILL HEAD STRAIGHT TOWARDS THE MAIN THING THAT IS ENABLING SWAP IN BLACKPEARL WITHOUT RAMBLING MUCH..
***PLEASE NOTE THAT YOU MUST HAVE INSTALLED BUSYBOX TO ENABLE SWAP.IF YOU HAVEN'T THEN DOWNLOAD AND INSTALL IT FROM THE ABOVE POST.
SO HERE IS A TUTORIAL TO ENABLE SWAP IN YOUR CANVAS 2 POWERED BY BLACKPEARL.
1.first of all download this app from here
2.put it in your phone and simply install as normal apk.
3.now turn it on and select 98_swap_cache_v300 from the scripts shown below.
(it should be something like the 1st screenshot attached below)
simply close the app and roar to show your excitement because with these two simple steps you have increased your ram and made a swap memory in cache partition.NO NEED OF GIVING ANY WEIRD COMMANDS THROUGH TERMINAL EMULATOR TO ACTIVATE IT..
TO VERIFY IF YOU HAVE SUCCESSFULLY ENABLED SWAP SUPPORT YOU CAN SIMPLY DOWNLOAD THIS APP FROM HERE.
OPEN THE APP AND TYPE
Code:
free -m
NOW YOU SHOULD FIND SWAP VALUE TO BE 300 AND NOT IN ANY CASE TO BE 0(as 0 means no swap file in the phone)
IT SHOULD LOOK SOMEWHAT LIKE THE SECOND SCREENSHOT ATTACHED BELOW.
WITH THIS YOU CAN VERIFY IF YOU HAVE SUCCESSFULLY ENABLED SWAP OR NOT. PLEASE NOT THAT THIS VERIFICATION IS NOT ALL COMPULSORY.IT IS JUST A CROSS-CHECK
====I HAVEN'T TRIED THIS METHOD ON STOCK KERNEL BUT IT IS WORKING FLAWLESSLY ON ALL THE CUSTOM KERNELS AVAILABLE.PLEASE TEST AND REPORT IF IT IS WORKING ON STOCK KERNEL.
====SOME KERNELS ARE ALREADY HAVING SWAP ACTIVATED FEATURE INBUILT....SO NO NEED OF ACTIVATING SWAP IN THEM USING THIS METHOD.TO CHECK IF YOU ARE OWNING A KERNEL HAVING IN-BUILT SWAP ACTIVATED USE THE METHOD DESCRIBED ABOVE.
====IT IS COMPULSORY AND VERY IMPORTANT TO HAVE A PROPER BUSYBOX INSTALLED. IF YOU DON'T KNOW WHAT IT IS THEN YOU ARE MOST PROBABLY NOT HAVING.TO INSTALL BUSYBOX FOLLOW THE TWO STEP EASY METHOD DESCRIBED IN ABOVE POST.
ADVANTAGES OF MAKING SWAP FILE IN CACHE PARTITION
The cache partition is now not used by android system.though our canvas 2 has got 504mb of cache space but out of it,hardly 10 mb is used...so we can create a swap file there without disrupting the android system.
sd card read and write speed is less than the read and write speed of system. THEREFORE SWAP IN CACHE PARTITION IS MUCH FASTER AND EFFICIENT THAN SWAP FILE CREATED IN SD CARD.
there is no use of sd card in this type of swap.HENCE NO MEMORY CARD DEGRADATION.IT DOES NOT AT ALL EFFECT THE LIFE OF YOUR SD CARD.
this is not even disrupted even while unmounting sd card or while connecting phone as usb mass storage.SO FEEL FREE TO UNMOUNT IT.
REGARDING DISADVANTAGES.....YOU NAME IT
HIT THANKS IF YOU FOUND THIS HELPFUL.
reserved
RESERVED
gud start .. keep it up broo..
looks dffrent from any other
[email protected] said:
HI GUYS...TODAY I AM PRESENTING THE FIRST WINDOWS PHONE (WP8) BASED ROM EVER MADE FOR MICROMAX A110 CANVAS 2:highfive: I WONT SAY THAT THIS IS THE BEST ROM MADE TILL DATE BECAUSE IT DEPENDS ON OWN TASTE.BUT YES THE ROM WILL NOT DISAPPOINT YOU FROM ANY POINT OF VIEW...WETHER YOU ARE A HARDCORE GAMER OR A CASUAL ANDROID USER WHO DEMANDS FEATURE.
DOWNLOAD LINK: http://db.tt/17MaD3P5
(please read the following instructions mentioned in 5th post to extract best of the rom)
INSTRUCTIONS FOR INSTALLING THE ROM
1.boot into recovery mode by holding power button+volume up button+volume down button.
2.then wipe data/factory reset ,wipe cache partition.
3.go to advanced menu and wipe delvic cache
4.now select install zip from sd card.choose zip from sd card.
5.locate and select the rom's zip file.
6.after flashing reboot the phone and enjoy the new experience.
I HAVE TAKEN STOCK ROM AS BASE(but i assure you that you will not in any case feel stockish) AND THE ROM CONTAINS STOCK KERNEL IN IT(thus no need to add boot.img in the package) BUT I SUGGEST YOU TO FLASH THE CUSTOM KERNEL MADE BY @tri_zet
GUYS THIS IS MY FIRST ROM SO PLEASE HIT THANKS TO MOTIVATE ME...IT IS TOTALLY FREE..
Click to expand...
Click to collapse
Hey make 4.2 rom based on canvas 4 rom
The topic says its a 4.1.1 rom and ur benchmark result says its a 4.1.2.... Why is that?
Sent from my Micromax A110 (Canvas 2) using XDA Premium 4 mobile app
very nice not able to download pls upload in dev host mirrors
give the link for 4.2 notificatiion by bond in op the link is not in fulll form
rufus.reynolds said:
The topic says its a 4.1.1 rom and ur benchmark result says its a 4.1.2.... Why is that?
Sent from my Micromax A110 (Canvas 2) using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have simply edited the build.prop to increase the compatibility of some games and apps.
Its is basically 4.1.1 stock b based only.
gsunil said:
very nice not able to download pls upload in dev host mirrors
give the link for 4.2 notificatiion by bond in op the link is not in fulll form
Click to expand...
Click to collapse
Ok...guys
Now changed the link and uploaded on Dev-host
Now download and please give feedback.
i installed the rom successfully very nice ui and animation some times i get chinese letter notification otherwise awesome
hey bro [email protected]
first of all congrats on your new ROM! great looks.. will download and try out and give feedback soon.. but just some suggestions..
1.Windows Music Player (this one looks really great)
2.Windows Calculator
3.Windows Email
4.Windows Keyboard (you should obviously have windows keyboard in windows style ROM)
5.Windows Notifications (this one looks great too)
and last of all windows style Gallery.. (though it has one major bug.. gets FC every time you press the back button)
please add these features too! i have a totally Windows looking phone.. but will still try out your ROM!
just ask me for any of these things mentioned above.. or if you have them yourself.. just upload them in the next update!
Cheerios mate! :good: :laugh:
Nice work !
Bro the swapper link is not working
This looks so fantastic will try and report later cheers mate
Sent from my Micromax A110 using XDA Premium 4 mobile app
anik1996 said:
hey bro [email protected]
first of all congrats on your new ROM! great looks.. will download and try out and give feedback soon.. but just some suggestions..
1.Windows Music Player (this one looks really great)
2.Windows Calculator
3.Windows Email
4.Windows Keyboard (you should obviously have windows keyboard in windows style ROM)
5.Windows Notifications (this one looks great too)
and last of all windows style Gallery.. (though it has one major bug.. gets FC every time you press the back button)
please add these features too! i have a totally Windows looking phone.. but will still try out your ROM!
just ask me for any of these things mentioned above.. or if you have them yourself.. just upload them in the next update!
Cheerios mate! :good: :laugh:
Click to expand...
Click to collapse
Sure Buddy these will be in the next update...
Actually i didn't prefer Windows keyboard etc.. because i thought 4.2 keyboard with swipe feature was better.
But if still you guys want that they will be there in the next update.
does dialer, sms , status bar and contacts have dual sim functionality?
Sent from my A110 using xda app-developers app