Related
Hello all, I have been lurking for about 3 months. I have usee the information found here to not only keep my gtab (it was so horrid when I got it almost took it back tbe same day. But keep it from hitlting the wall whenI get so pissedat it. The information i get here is easy to understand and easy follow.
But I seem to be at an impass. I want to install TnT lite from my microsd card but I seem to be doing something wrong
My intent is to wipe ALL the data on the device. But I dont want to do that till I know I can install TnT lite 4.2 fromthe micro sdcard.
When I boot to clockwork the only option I see is "install from sdcard" meaning the internal sd.
I have put the recovery folder in the root of the microsd. I have made sure that the command file says "sdcard2". I have removed from update zip from the sdcard (internal) and made sure the update zip file in also in the root of the micosd. But clockwork mod dose not see it.
I have searched the forum looking for more comprehensive idea onhow to do it from microsd but I have not seen anything. If I missed a step or looked in the wrong place let me know.
I can not start a tbread in the dev area so I hope I can find some help here.
The wall is starting to look like good place to slam this thing
Hi,
I think that when you use the update.zip and /recovery/command file method, that's with the STOCK recovery. CWM *replaces* the stock recovery, i.e., you either have stock recovery OR CWM, on your Gtab. That's why both get initiated by pressing the same key sequence, power pls Vol+.
So, if you want to flash using an update.zip and recovery/command (modified to pt to /sdcard2), you'll need to get stock recovery in your Gtab.
You can get stock recovery by flashing one of the newer stock TNT versions, e.g., 3452. That replaces CWM in the recovery partition, as part of the flash. Then put your desired update.zip and modified recovery/command on /sdcard2, power off, the power plus Vol+.
Jim
Thank you! That helps.
Hi,
I'm not sure if this helps or not, but you can mount USB in clockwork. So you could wipe all the data, partition and everything, then mount the USB, copy the rom over from your PC to the internal storage and flash it.
If you decide to use clockwork, make sure it's the .8 version that you can get from the first page of the tNt Lite thread.
nbowes said:
Hi,
I'm not sure if this helps or not, but you can mount USB in clockwork. So you could wipe all the data, partition and everything, then mount the USB, copy the rom over from your PC to the internal storage and flash it.
If you decide to use clockwork, make sure it's the .8 version that you can get from the first page of the tNt Lite thread.
Click to expand...
Click to collapse
That is great news. Thanks!
Hi folks,
I might have a stupid noob question, but not able to find the answer.
I got a Motorola Xoom (EU), and I did root it the other day.
All working fine.
Now I get update notifications for 3.1, but I'm not able to install the stock update.
After the reboot, the Android logo is showing an error, and then it reboots to normal OS.
Now the question is, all instructions I found so far require an external SD Card to get a custom rom with 3.1/3.2 installed.
Is a SD card required, or can I get the same done via USB debug?
Thanks for looking at this thread.
Regards,
derchris
derchrisuk said:
Hi folks,
I might have a stupid noob question, but not able to find the answer.
I got a Motorola Xoom (EU), and I did root it the other day.
All working fine.
Now I get update notifications for 3.1, but I'm not able to install the stock update.
After the reboot, the Android logo is showing an error, and then it reboots to normal OS.
Now the question is, all instructions I found so far require an external SD Card to get a custom rom with 3.1/3.2 installed.
Is a SD card required, or can I get the same done via USB debug?
Thanks for looking at this thread.
Regards,
derchris
Click to expand...
Click to collapse
You need a custom version of ClockworkMod Recovery made for the Xoom. You can flash the solarnz R4c v3.2.0.0 that does require a micro sdcard (even a 2GB is fine) which will appear at mnt/external1, or you can go with Rogue recovery that will let you flash from internal storage (mnt/sdcard) or other options. It's up to you but you must be able to flash the recovery image file through adb/fastboot, since you can't flash a zip file through fastboot.
Thanks for the reply,
I used this thread to install recovery-Tiamat-R4c-100611-1150-cwm.img, as they had a recovery image file for adb/fastboot.
Looking through the options, I see a "mount USB storage" option, but I ended up in only having a 3 MB drive, and as soon as I exited the menu the drive was gone too.
Do you happen to know a download for an adb/fastboot image of the Rogue Recovery?
I don't have a single SD Card, thats why I would like to use USB or internal memory.
derchrisuk said:
Thanks for the reply,
I used this thread to install recovery-Tiamat-R4c-100611-1150-cwm.img, as they had a recovery image file for adb/fastboot.
Looking through the options, I see a "mount USB storage" option, but I ended up in only having a 3 MB drive, and as soon as I exited the menu the drive was gone too.
Do you happen to know a download for an adb/fastboot image of the Rogue Recovery?
I don't have a single SD Card, thats why I would like to use USB or internal memory.
Click to expand...
Click to collapse
You would have to go to that thread and see if there is an option for initial install via img file. I haven't used Rogue, so I don't know.
I figured it out myself
There was an img file inside the zip, which I was able to flash to the Xoom.
Next I used Tiamat Xoom Rom 2.2.2 "Moray" from the internal memory, and have now 3.2.1 on my Xoom.
Thanks for the help
My pleasure.
I have a Motorola Xoom MZ601 UK WiFi+3G and have rooted with Clockworkmod v5.8.3.1 and installed new roms successfully up to now.
However, I cannot go any further as the sdcard will not mount. I have tried all that I can think of, like formating the sdcard, unmount/mount, partition it, etc.
The operating system shows the card there along with the contents. I have tried different sdcards and they are all visible from the OS but not from the recovery program.
What should I do now? Do I need to re-install clockworkmod recovery again.
(Apologies if this has been posted elsewhere, I have tried to search for answers but have failed to find any) This seems to have been an old problem, solved with an upgrade which 5.8.3.1 exceeds.
Problem solved
OK, Problem solved.
The last resort was to reload the clockworkmod image using adb.
Everything is fine now, the sdcard mounts OK.
Hi everyone,
I have a Galaxy Tab 2 7.0 (P3100) and I have rooted it and installed CWM so I could install the latest CM release. But when I try to install the CM zip file, it says "some symlinks failed". Now my tablet won't boot, the splash screen with "Samsung Galaxy Tab 2" keeps on forever. But I still have access to CWM and the Download mode so I think everything's not lost yet
Here are the exact steps I did:
- Uploaded the CM image (cm-10-20121213-NIGHTLY-p3100.zip), the gapps zip and the root zip to the tablet.
- Installed heimdall on my computer, with the correct drivers.
- Flashed CWM on the tablet.
- Installed the root zip on the tablet using CWM.
- Booted the tablet again just to make sure rooting was enabled (yes, it was).
- Opened CWM again, wiped data, wiped cache.
- Installed CM image:
--- Error: some symlinks failed (status 7)
- Installed the gapps zip file (worked)
- Formatted /system
- Installed CM image:
--- Same error: some symlinks failed (status 7)
I wanted to try another CM images, maybe that one is broken, I don't know, but now I cannot upload more files to the tabled internal SD card. I can't mount it anymore on my computer because the tablet won't boot. I tried using an external SD card (from another Android phone I have) but CWM says "Cannot mount /external_sd" when I try to mount it.
Can anyone help me? I want to flash the latest CM on my tablet.
Thanks!
This seems to me like either a broken recovery or maybe a corrupt download. What version of CM are you trying to flash? Also, what version of CWM are you using and where did you find it?
Posted from my Fascinate using XDA Premium
Yeah, I also think the download was corrupt. I tried flashing cm-10-20121213-NIGHTLY-p3100.zip (the latest one on the day I flashed) and my CWM version is 6.0.1.1. I downloaded it from ClockworkMod official website, they say that is the latest version for my tablet model.
I believe CWM is working and that the image is corrupt, but I can't find a way to flash another CM image because I don't know how to put another file inside the tablet, or how to flash an image from my computer to the tablet. Can I use something like heimdall to flash a CM to my tablet? Can I upload an image to the tablet so I can use CWM to install it? "adb push" doesn't work, it doesn't detect my device in CWM mode. Do I need some working/stock Android image on the tablet so I can flash CM over? Or it will work no matter what's installed (given that the download is not corrupt)?
Thanks!
cristiandeives said:
Yeah, I also think the download was corrupt. I tried flashing cm-10-20121213-NIGHTLY-p3100.zip (the latest one on the day I flashed) and my CWM version is 6.0.1.1. I downloaded it from ClockworkMod official website, they say that is the latest version for my tablet model.
I believe CWM is working and that the image is corrupt, but I can't find a way to flash another CM image because I don't know how to put another file inside the tablet, or how to flash an image from my computer to the tablet. Can I use something like heimdall to flash a CM to my tablet? Can I upload an image to the tablet so I can use CWM to install it? "adb push" doesn't work, it doesn't detect my device in CWM mode. Do I need some working/stock Android image on the tablet so I can flash CM over? Or it will work no matter what's installed (given that the download is not corrupt)?
Thanks!
Click to expand...
Click to collapse
Please tell me you made a backup after rooting and before modding?
If you didn't (which it sounds like), BAD CRISTIAN!!! But this will make you learn to do it from now on, huh?
Which leaves you only two options, both include using a computer to get a ROM zip to the tab...
1- connect tab to computer in recovery with usb cable and download a new copy to SD card via computer.
2 - remove SD card from tab, place in computer card reader, and download a new copy to SD card via computer.
LeftyGR said:
Please tell me you made a backup after rooting and before modding?
If you didn't (which it sounds like), BAD CRISTIAN!!! But this will make you learn to do it from now on, huh?
Click to expand...
Click to collapse
I didn't make a backup :crying:
Yes, now I learnt, I will always make a backup from now on...
LeftyGR said:
1- connect tab to computer in recovery with usb cable and download a new copy to SD card via computer.
Click to expand...
Click to collapse
How exactly do I download a new copy of the image to the SD card? When I plug the tablet to the computer, I can't access its files. It used to show me the files when the Android system booted, but on Recovery mode it won't display them, the filesystem isn't mounted. Should I do anything special? Should I use another CWM version?
LeftyGR said:
2 - remove SD card from tab, place in computer card reader, and download a new copy to SD card via computer.
Click to expand...
Click to collapse
I tried that, but it seems I cannot mount the external SD card using CWM. When I hit "Mount external SD Card", it says "Cannot mount /external_sd". The SD card works fine though, I use it on another phone and on my computer... Is this a CWM problem? =/
Thanks!
cristiandeives said:
I didn't make a backup :crying:
Yes, now I learnt, I will always make a backup from now on...
Click to expand...
Click to collapse
Good man.
How exactly do I download a new copy of the image to the SD card? When I plug the tablet to the computer, I can't access its files. It used to show me the files when the Android system booted, but on Recovery mode it won't display them, the filesystem isn't mounted. Should I do anything special? Should I use another CWM version?
Click to expand...
Click to collapse
Pull the ext sd card out of the tab and put it into a card reader on a computer using the adapter the micro sd card [should have] come with.
I tried that, but it seems I cannot mount the external SD card using CWM. When I hit "Mount external SD Card", it says "Cannot mount /external_sd". The SD card works fine though, I use it on another phone and on my computer... Is this a CWM problem? =/
Click to expand...
Click to collapse
Possibly... However if you can mount your internal sd card, you should be able to place the zip on there. I don't usually suggest using internal, but if that's what you gotta do....
I found out why I couldn't mount my external SD card with CWM: I had to format it with FAT32! I don't know what filesystem there was before, the SD card I have was used by an old Éclair phone. I still couldn't install others CM 10 images (I really don't know why), but I managed to install CM 9 and the brand new CM 10.1.
Thanks, guys! =)
cristiandeives said:
I found out why I couldn't mount my external SD card with CWM: I had to format it with FAT32! I don't know what filesystem there was before, the SD card I have was used by an old Éclair phone. I still couldn't install others CM 10 images (I really don't know why), but I managed to install CM 9 and the brand new CM 10.1.
Thanks, guys! =)
Click to expand...
Click to collapse
Awsome. Thank you for providing your solution!!
(Now, I know this is not in the right section or even in the device's page, but...)
Forewarning: I am NOT responsible for any damages caused by running this tool. (You ran it, not me.) Also, do NOT use on the Thrive 7 or ANY of the Excites! The Thrive 7 has an entirely different bootloader/partition layout than the 10.
Pio_masaki and I have been working hard for almost a year to get root on the ICS version of the Toshiba Thrive 10.
Last night, I was able to finally sneak past sealime.ko and have it work.
It uses the "root any ICS device" tool, with special modifications specifically for the Thrive 10.
(can't post any links, so it's on the "thrive-hackers" github page.)
Special note: While it is set up for OSX ADB, I have not been able to find any binaries.
Are you saying that we are close to a root method for Thrives running Toshiba ICS?
rohads said:
Are you saying that we are close to a root method for Thrives running Toshiba ICS?
Click to expand...
Click to collapse
Saying there is a method to root it now, yes, we got around sealime.ko. This means we can flash the HC bootloader which is unlocked, which allows custom recovery and kernels/ramdisks (boot.img) to be used.
BTW the link is https://github.com/Thrive-Hackers
congrats guys ! very awesome work !
jdsingles deodexed ROM w/ agat63's 1.3 kernel Suped up w/ CB 6.26.13
More specifically, it bypasses sealime to flash the unlocked bootloader. What we did was we MVd /dev/block/mmcblk0p6 to 0p9. It's a pure fluke Pio and I found out that it works. We found out that sealime was explicitly blocking write to 0p6, so he semi-sarcastically said to move it. I ran the mv command, whadda ya know? It worked!
'Course, getting the tool completed wasn't as simple as that...
PS: Could we get this moved to the Toshiba Thrive Development section?
Have instructions been written for the process?
worked for me
I used this tool on Jul 8 and it worked very well. I got it from thriveforums dot org. Thank you pio_masaki and AmEv.
I tried changing the recovery to the latest TWRP using "fastboot flash recovery twrp-2.4.1.0.img" while in bootloader. I was not able to, though as it kept giving me errors.
Does this bootloader not allow flashing a recovery? I noticed the rootme script uses adb commands to push the CWM recovery.
I am now running Dale's latest deodexed rooted ICS rom with the CWM recovery he included.
Other unrelated lessons learned:
If you can't mount your SD card in recovery, try a different card!
And, Dale packages his update.zip inside the downloaded zip file!
navyguy said:
I used this tool on Jul 8 and it worked very well. I got it from thriveforums dot org. Thank you pio_masaki and AmEv.
I tried changing the recovery to the latest TWRP using "fastboot flash recovery twrp-2.4.1.0.img" while in bootloader. I was not able to, though as it kept giving me errors.
Does this bootloader not allow flashing a recovery? I noticed the rootme script uses adb commands to push the CWM recovery.
I am now running Dale's latest deodexed rooted ICS rom with the CWM recovery he included.
Other unrelated lessons learned:
If you can't mount your SD card in recovery, try a different card!
And, Dale packages his update.zip inside the downloaded zip file!
Click to expand...
Click to collapse
Try fastboot flash:raw.
Is there any need to do a backup before rooting?
TubaMeister said:
Is there any need to do a backup before rooting?
Click to expand...
Click to collapse
Not explicitly, but it wouln't hurt in case your tablet got into contact with allspark.... er, the bootloader didn't flash, and you're stuck in a bootloop.
easy root and CWM recovery
walk thru
http://www.youtube.com/watch?v=MXeYJhKCgX8
adb driver
http://www.thriveforums.org/forum/t...vers-usb-adb-driver-installation-package.html
root tool
https://github.com/thrive-hackers/thrive-10-inch-ics-root,
follow this to install CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
follow to install touch CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
ROMs
http://www.thriveforums.org/forum/dalepl/
Uh oh
robyn402 said:
walk thru
http://www.youtube.com/watch?v=MXeYJhKCgX8
adb driver
http://www.thriveforums.org/forum/t...vers-usb-adb-driver-installation-package.html
root tool
https://github.com/thrive-hackers/thrive-10-inch-ics-root,
follow this to install CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
follow to install touch CWM
http://www.thriveforums.org/forum/d...0-clockworkmod-touch-recovery-v6-0-1-1-a.html
ROMs
http://www.thriveforums.org/forum/dalepl/
Click to expand...
Click to collapse
I installed the drivers, used the root tool, the restore was successful, but now the tablet is stuck in a boot-loop mode.
The root tool was running, there was a line that said the screen would go blank, which it did, and it stayed there for several hours. When I came back to check on it, the tablet was off, so I turned it on. That's when I found the boot loop. It'll get to the home page, tell me that nova launcher has stopped, then loop back to the moving stars section of the boot screen.
Any ideas on what to do now?
DLeach4512,
if CWM is still alive, so just flash any ROM via CWM (flashing wipes all your data that exist in internal memory, so you need to make backup via CWM if you wish to save your data; and after flashing ROM you can import all data via Titanium Backup)
Kyonex said:
DLeach4512,
if CWM is still alive, so just flash any ROM via CWM (flashing wipes all your data that exist in internal memory, so you need to make backup via CWM if you wish to save your data; and after flashing ROM you can import all data via Titanium Backup)
Click to expand...
Click to collapse
You know, I feel kinda dumb because I didn't even try that!
Now i've tried it, and I see I can get into CWM.
I put a ROM on an SD card on my PC, then put that SD card into the Thrive and used CWM to install the .zip of the ROM I selected, and it won't install. It starts, then it says Installation aborted, but won't tell me why.
Any ideas where I should start unraveling this mystery?
1. check that your recovery is CWM and not stock recovery
2. check that you put on SD archive that contain folders named system and META-INF, file like boot.img, something other maybe (many ROMs archive contain "archive in archive", so you need to unpack archive from main archive and than put that internal archive on SD); after checking that all right try to flash that archive again
3. try another sdcard (full sized SDHC + formated in FAT32)
DLeach4512 said:
You know, I feel kinda dumb because I didn't even try that!
Now i've tried it, and I see I can get into CWM.
I put a ROM on an SD card on my PC, then put that SD card into the Thrive and used CWM to install the .zip of the ROM I selected, and it won't install. It starts, then it says Installation aborted, but won't tell me why.
Any ideas where I should start unraveling this mystery?
Click to expand...
Click to collapse
also make sure you open the zip and place the update.zip on your card -
From my GSIII - jd's Stock/Rooted/Deodexed 4.3
Kyonex said:
1. check that your recovery is CWM and not stock recovery
2. check that you put on SD archive that contain folders named system and META-INF, file like boot.img, something other maybe (many ROMs archive contain "archive in archive", so you need to unpack archive from main archive and than put that internal archive on SD); after checking that all right try to flash that archive again
3. try another sdcard (full sized SDHC + formated in FAT32)
Click to expand...
Click to collapse
Excellent!
1) I had to extract "update.zip" from the ROM I had downloaded.
2) I re-formatted the card I was using to FAT32 instead of FAT.
3) I was able to get the install started with no trouble after following your directions.
BIG THANK YOU FOR THAT!
I got a successful install message, and then it booted!
Thanks a million!
Problems after Mount Changes
I changed the mount as described on thriveforums.org to allow apks and data to go to the external sd rather than "shared" internal memory.
I now have the situation with less free memory available on the sd card than on internal. The CWM backups went on the physical card- a 32 G one almost full. Will look for a major mfr 64 Gig.
One or so issues with the revised mounts where the external sd card is now internal. They relate to making backups with dalepl's latest CWM 6.0.1: where to put CWM backups for now and are they being made correctly with the revised mounts?
The backup made prior to the mount change looks normal: a single, dated/numbered folder about 2.6 Gb, 6 files: boot.img, cache.ext4.tar, data.ext4.tar, nandroid.md5, recovery.img and system.ext4.tar. However, the one made after the mount change also has a dated, numbered folder of only 15.8 Mb and 7 files: .android_secure.vfat.dup, boot.img, cache.ext4.dup, data.ext4.dup, nandroid.md5, recovery.img and system.ext4.dup. There is a second folder associated with the later bu called "blobs", which is huge --2.76 Gb, 3292 folders and 6581 files. Is this an expected result and any one think it might be a valid bu?
Also, it went on to the external SD (now "internal") and total storage use is now almost 28 Gb out of 30.2. I now have the situation with less free memory available on the sd card than on internal. The stuff there looks ok, pix movies and music plus CWM bups of 5.5 G and App_Backup_Restore archived apks at 2.8 Gb. So, I copied the cwm backups folder to the real internal memory, now sdcard2. I assume this true internal memory might get wiped during a restore so, this is not a valid storage site for this? And, if I put copies on a spare card, will that really work if my downloaded apps are on the original card, eg does the CWM backup copy the external card apps?
As I note, for some reason this 'blobs' folder won't copy easily to a USB via the Thrive or Win 7 pc. It also won't copy to a Win 7 HD partition where I store my Thrive stuff. (Update: I was able to do a wireless transfer to my pc and then, from there, to a spare SD card.)
Any thoughts? Should I go back and change the mounts to default?
BTW, I find FolderMount has no real use with the changed mount on the Thrive unless someone tells me otherwise. With the Thrive mounting the external card as internal, files go to the physical card.
gberpa,
I don't understand your question - it is very long. But I know that custom recovery (CWM / TWRP) itself remounts sdcard and internal memory before wipe process so it will wipe correct memory (only internal memory). If you need to change the ROM you don't need to worry about mounting paths because after wipe mounting paths will be restored to original.
Partition layout of Toshiba Thrive 10.1" ICS
AmEv said:
Also, do NOT use on the Thrive 7 or ANY of the Excites! The Thrive 7 has an entirely different bootloader/partition layout than the 10.
Click to expand...
Click to collapse
Can you give us information on the Toshiba Thrive 10.1" ICS partition layout and their names, please?
We would like to compare it to ours Toshiba Excite Pro (AT10LE-A, tostab12BA). A Dirty Cow enabled KingoRoot has given us a temporary root.
[Q] How Root Toshiba Excite Pro AT10LE-A-108 by dexxxZ
https://forum.xda-developers.com/showthread.php?t=2583677&page=6
Sent from my takee 1 using XDA Labs