Related
Hi, I am new to all of this, but Im a quick learner. I rooted my phone and have superuser permission. I have installed multiple applications that will help me to perform ROM installs all of which still do not help. I even tried the three button solution, however I am still getting the same message when I go into recovery mode. It is as follows: E: failed to varify whole-file signature then under that I get: E: signature verification failed, instalation aborted.
I tried applying sdcard update. zip, wiped out cache partition, factory reset, etc...
I have tried everything. I tried using Mod Manager, I get the downloads but then when i try to install after I make sure to click backup rom and clear cache, it boots to the rom screen, (not really sure what you guys call it, sorry) and I get that same message, the signature failed, et...
my phone info is as follows: SCH-I500, I500 Commercial Package_DL9 To EA28 (I think verizon automaticly updated for the emergency dial) code 200
hardware version i500.04 firmware version 2.1update.1, baseband version S:i500.04 V.EA28, kernel version 2.6.29 and last but not least build number SCH-I500.EA28
Now saying all of that, I tried all of the above steps prior to this automatic update and it still did not work. I still received the signature message.
I even tried Voodoo, as well as DL30, Superclean, none of which will pass the signature autentacation. I want to try to get past this as I am having my phone replaced due to burn in and want to get the steps right so I do not BRICK my phone after it has been replaced. If this one bricks, it wont matter to much because I will have the new one on Monday.
Any help would be greatly appreciated. I love this tecky stuff and want to be knowagable on how to get past this message so I can go full force on Monday.
Thanks,
EssyG
Also I checked the site and tried everything but still won't work.
Sent from my SCH-I500 using XDA App
You will need to flash a new Recovery via ODIN which you can find below for your Samsung Fascinate:
http://forum.xda-developers.com/showthread.php?t=782204
&
Also read this http://forum.xda-developers.com/showthread.php?t=790004
Thank you, up and running 2.2, will post screen latter! Now I need to get my old phone back to stock so I can send it back to veriazon. YOU ARE THE BEST!!
P.S. I love your idea about the 10 post allowence to post on other forums.
Essy G
If o.k. I will post what I did and that way new users will be able to follow directions. I am a newbe but have become addicted to this stuff. THANKS!!
now I bricked my phone... lol
Now let me start by saying I loved 2.2, no problems with it at all. but when battery ran out I wanted to clean stats in cwm green and the screen would not come up, sd would not mount any how I tried to start over, flashing oden, all the steps, but my drivers will not stay for some reason after flashing I need to uninstall the reinstall drivers or they are not recognized, really sucks, any how I got frustrated so while in odin I pulled the plug, lol literally, and now have a pic of a "phone" then ".." then triangle with (like my icon here)"!" then ".." picture of "computer". I called verizon and there sending me yet another phone. lol my question is, will they be able to unlock it and see that I had 2.2 on it? does anyone know what they do with the phones we send back? Basicly I want to know if they can unlock that being I can't. and if so, will they see the 2.2? Any sugestions?
Anyone there?
Any one there? Also I am debating, do I wait for official release. I heard it was coming out 2/22/11. If I put dl30 on new phone again and they release the update, will I still get the automatic update via verizon? If so will I lose root? Any comments on post #5? I can't believe I had it running I totally messed it up. Thank goodness when I called verizon I got two girls at tec support, lol while I am a girl, I am a tech lover, I acted like I had no idea what happened, well they didn't either, lol So just waiting on new phone to come in, yet again so I am getting everything ready to quickly install dl30 to new phone again. Hopefully I do not lose drivers again, as it seems that once I flash in odin, the hardware icon disappers as if drivers are not installed. any how, I was just wondering if anyone had an answer to post #5 so that when I return the phone, I am not caught, lol that would really stink! Plus I am board, took off of work because my kids are sick and now I have a bad cold also, so any comments would be great!! Besides I need to be here to sign for new phone.
Thanks,
Essy g
I am way N00b at this but how do I remove this from my Atrix 2? It is eating up my battery and I can't open some of my apps, they force close. Is it possible to flash back to the point prior to this?
It was backed up before I started but know I cant find the back up. I just want to go back to the point when it was rooted. I used "MotoFail" to root and everything was going great and decided to try this, my bad, any ideas besides buying anoter phone?;-(
ozziedog said:
I am way N00b at this but how do I remove this from my Atrix 2? It is eating up my battery and I can't open some of my apps, they force close. Is it possible to flash back to the point prior to this?
It was backed up before I started but know I cant find the back up. I just want to go back to the point when it was rooted. I used "MotoFail" to root and everything was going great and decided to try this, my bad, any ideas besides buying anoter phone?;-(
Click to expand...
Click to collapse
you have one option, flash the fxz and reroot.
start over.
there is a great nOOb thread telling how to do it.
http://forum.xda-developers.com/showthread.php?t=1396650
ozziedog said:
I am way N00b at this but how do I remove this from my Atrix 2? It is eating up my battery and I can't open some of my apps, they force close. Is it possible to flash back to the point prior to this?
It was backed up before I started but know I cant find the back up. I just want to go back to the point when it was rooted. I used "MotoFail" to root and everything was going great and decided to try this, my bad, any ideas besides buying anoter phone?;-(
Click to expand...
Click to collapse
How did you back up?
If you used CWM (from the A2 Bootstrapper) just reboot into CWM, go to backup and restore, select restore, and select the backup that you made.
If you didn't use CWM or you can't find the backup then you will have to flash the fxz as said above. It will completely remove all of your apps and return you to stock 2.3.5. Make sure that you follow the directions about replacing files.
Thank you matt99017d I will check the link and cogeary I did the back up CWM I'll go that route first if that doesnt work, I'll go back to the beginning. Thank you again for the help
I could not find the backup in CWM so I flashed fxz following the instruction on the link you provided and the info. I'm back to 2.3.6 and it is rooted. Thats as far as I'm going for now, thanks for the help you all provided.
I see at /system/etc/init.d 2 files with sd-card optimization. 03sdtweak and 99override. Is there right or needed to delete one of them?
I highly suggest getting Titanium, for the cases where you don't have a back up, because I lost all my free apps and I don't even remember what all I had. I'm getting things back as I need them.
Douchewithaphone said:
I highly suggest getting Titanium, for the cases where you don't have a back up, because I lost all my free apps and I don't even remember what all I had. I'm getting things back as I need them.
Click to expand...
Click to collapse
https://market.android.com/mylibrary
^ shows everything you've installed from the Android Market. You should have records somewhere if you got things from the Amazon Appstore.
I haven't tried it myself but if you've made a backup in CWM you have the option to only restore apps/data.
Well I decided to give SuperCharged V5 with update 1, and when I disconnected form the charger this morning it was stuck in the boot animation. It has been stuck in that position for the last 30 minutes.
I connected it to PC and it doesnt show as being connected. I've done a search and can't find anything on how to fix it.
I did a battery pull, took SD card out to see if I could maybe transfer something from it to desktop, but everything that was on it is gone.
Don't know what happened.
Can someone point me in the right direction?? In the mean time I'll keep looking.
Ozzie Im in a similar situation. I"m in a bootloop as well (Supercharged Logo just keeps rolling on the screen). I can't get into the Android OS, and I also can't even get into Fastboot to flash back to stock. At this time it appears its bricked. I have been trying to fix this the past 12 hours.
Are you in the same situation??!
ej_424 said:
Ozzie Im in a similar situation. I"m in a bootloop as well (Supercharged Logo just keeps rolling on the screen). I can't get into the Android OS, and I also can't even get into Fastboot to flash back to stock. At this time it appears its bricked. I have been trying to fix this the past 12 hours.
Are you in the same situation??!
Click to expand...
Click to collapse
I am sorry to say, but if you can't get into fastboot it's probably bricked
so i installed V5 and update 2 and i am getting the force closes and my phone won't show up when i plug the usb into my computer
and i can't delete or edit files in my files and i can't open any websites or connect to airdroid on wifi, or use data so i can't get any files onto my phone
help...
flashing the stock fxz worked
Man...and I was gonna do this...flash the supercharged ROM. Nevermind.
after i flashed the 2.3.5 fxz like the bootstrapping thread instructed, i installed the ota update and rooted my phone again and then i tried the custom rom again just for fun
but this time i did v5 and then update 1. then instead of doing update 2, i flashed the image of the rom that's linked right under update 2 in the supercharged thread
it works flawlessly for me now
so i would just recommend that
Forgive me if I'm posting in the wrong section. Forgive me if I'm not allowed to post here yet. Just forgive me in general. I don't want to be banned or anything like that. I'm Extremely interested in android development.
I made a working port of ClockworkMod Recovery v5.0.2.8 for the Pantech Crossover. I wanted to do this before I started tinkering around with porting cm7.2. So that I would have a way to backup, restore, and flash new roms, etc... Or else when I make a noob mistake like yesterday and have a non booting phone resulting in having to flash my old boot.img with fastboot...anyways..
DANGER: DRAGONS AHEAD
FLASH AT YOUR OWN RISK
YOU HAVE BEEN WARNED
The method I used to flash the recovery was:
1)adb push recovery.img /sdcard/recovery.img
2)flash_image recovery /sdcard/recovery.img
3)repeat step 2 (for some reason it gave me a read error out of memory the first time)
Here's the link to the custom recovery:
http :// dl. dropbox .com /u/20070520/ recovery.img
I know I'm not supposed to post links yet. Remove spaces
I just hope that there are others with the Pantech Crossover that are interested in this and the possible future development of custom roms.
Also if anyone knows if there is a good way to get ahold of koush let me know, so I can give him what he needs to hopefully add this to Rom Manager. I couldn't message him on github because he doesn't have an email set up with it
And while I'm at it. Here's the method for rooting your crossover. I'm not going to provide the files since they can easily be found with a google search.
1: Find a copy of gingerbreak.apk and copy it to your sd card
2: Enable usb debugging and allow installation of non market apps
3: Install gingerbreak
4: Root device with Gingerbreak
5: You can uninstall Gingerbreak when its completed.
Sent from my rooted PantechP8000 using XDA
Thanks so much for this! I have a friend with a crossover and is always looking for my help with making it work better. I realize this is a newer thread, I was wondering how things were coming along with CM? Anything I can do to help perhaps?
crap i need a rom to fix my crossover the buttons are no longer mapped after a hard reset. please help.
Slow
Well, it's been slow goings so far. I downloaded the open source files for the p8000 and it looks like they just built the original rom from a generic build. I've been trying to get a more customized build setup but I need to do some more reading so far. One of the problems is that instead of an akmd(2) binary for orientation and compass it uses three separate modules. Plus the hci_attach is a bit different as well and so is the bluetooth. So that significantly hampers the ease of even a basic port.
As far as the gentleman with the question about a rom to fix your device. The best I can do right now is to upload a clockwork mod backup after I do a factory reset. I don't get much time to work on this between my wife and daughter.
Also, do you have adb access to your device? Surely it wouldn't be too difficult to adb push the correct keymapping files back to your phone.
You say a hard reset messed up your mappings? What problems were you experiencing prior to the reset?
Crossover
Hello,
I just wanted to let you know that there are people watching your thread. I am very interested in this as my parents have Crossovers and have recently rooted and unlocked them (well, I did) and set them up to work on Net10.
The only issue I've noted is that there are some failures, like the Market refusing to install apps no matter what is done. I'm going to install your ClockworkMod in hopes that later it might be useful.
I realize there isn't a large development scene for the P8k yet, and maybe there won't be but it's always a great hope that those with the capabilities might take pity. I was almost thinking that it might be my foray into actually looking deeper at the code than the small bit I've done.
Kind Regards,
Kaylus
Yup
kaylus said:
Hello,
I just wanted to let you know that there are people watching your thread. I am very interested in this as my parents have Crossovers and have recently rooted and unlocked them (well, I did) and set them up to work on Net10.
The only issue I've noted is that there are some failures, like the Market refusing to install apps no matter what is done. I'm going to install your ClockworkMod in hopes that later it might be useful.
I realize there isn't a large development scene for the P8k yet, and maybe there won't be but it's always a great hope that those with the capabilities might take pity. I was almost thinking that it might be my foray into actually looking deeper at the code than the small bit I've done.
Kind Regards,
Kaylus
Click to expand...
Click to collapse
I haven't had any problems with the market refusing to install apps but I do sometimes run across the no connection error with the market when on wifi. Although I did notice this before I rooted my crossover. Sometimes disabling and re-enabling the wifi helps. I really do think it is a bug somewhere in the original rom.
As far as the custom recovery image. Everything seems to be working pretty good. I use it mainly for restoring previous backups. I would say I've restored my backup at least a dozen times. Occasionally it states there was an error restoring .android secure but I have yet to track that down. I need to double check the recovery.fstab to make sure I have everything set right for the mount points.
stevotdo said:
I haven't had any problems with the market refusing to install apps but I do sometimes run across the no connection error with the market when on wifi. Although I did notice this before I rooted my crossover. Sometimes disabling and re-enabling the wifi helps. I really do think it is a bug somewhere in the original rom.
Click to expand...
Click to collapse
I'm actually completely stuck at this point. I'm rooted, unlocked, different carrier, APN set correctly. I can access data and voice -- but it just hangs at "Downloading..." on the market. If I factory reset it works initially but after reboot it fails. I'm not quite sure why this occurs and if it is just this phone or a side-effect of using it on a different carrier.
Strangely Wi-fi doesn't resolve it.
As far as the custom recovery image. Everything seems to be working pretty good. I use it mainly for restoring previous backups. I would say I've restored my backup at least a dozen times. Occasionally it states there was an error restoring .android secure but I have yet to track that down. I need to double check the recovery.fstab to make sure I have everything set right for the mount points.
Click to expand...
Click to collapse
I'll give your recovery a run and let you know, if you manage CM7 let me know I know it's a big undertaking. Thanks for the response.
Market Error
As far as the Android Market hanging. I see a few references to it being cause by the .android_secure folder becoming corrupted on the sd card.
One temporary fix suggest moving all the installed apk's back to the phone memory and deleting the .android_secure folder. Then rebooting and moving those apps back to the sd card.
That seems like some wasted time if it doesn't happen to work. I would just turn the phone off, remove the sdcard, and restart (granted any apps that were moved to the sdcard wont work until it is reinserted.) Then I would try to download and install an app. If that works then shutdown, insert sd, and reboot.
I'm really curious if the problems with .android_secure that you and i are having aren't just more bugs in the original rom.
Just as a poster above me said, I am watching this thread and really appreciate everything you are doing. Thanks again.
Well I appreciate the support. I just hope to be able to offer a rom sometime soon. Unfortunately I won't have anymore free time till Tuesday
crimson12 said:
Just as a poster above me said, I am watching this thread and really appreciate everything you are doing. Thanks again.
Click to expand...
Click to collapse
Not an issue, life first, then android development.
Sent from my Galaxy Nexus using Tapatalk
Pantech Crossover Update
Ahhhhh check out the pantech support page for the crossover. They finally have the Gingerbread update.
http:// pantechusa. com/xupgrade/ remove spaces.
Which is great because I soft bricked my phone (don't ask) and this was going to be the only way to fix it.
stevotdo said:
Ahhhhh check out the pantech support page for the crossover. They finally have the Gingerbread update.
http:// pantechusa. com/xupgrade/ remove spaces.
Which is great because I soft bricked my phone (don't ask) and this was going to be the only way to fix it.
Click to expand...
Click to collapse
Oh hell yes finally. Thanks for the notice!
Sent from my Galaxy Nexus using Tapatalk
Mildly related, but have you figured out how to root the gingerbread ROM? I've tried ginger break to no avail.
Sent from my Galaxy Nexus using Tapatalk 2
anyone have a stock image of the 2.2 for android my phone came preupgraded to 2.3.6 and i would like to have it rooted over being on gingerbread since a root method hasnt been found yet for the new firmware
Bricked?
I tried to use the pantech provided gingerbread update this morning. It got about an eighth of the way through and failed. It instructed me to reboot while holding volume up and home and power. That put it in software updating mode. I tried the upgrade 3 more times, it failed at the same point each time. Now my phone is stuck in S/W Updating mode and I can't seem to get it out. I've tried pressing volume up and down for 10 seconds, and pressing volume down and home while powering on, nothing seems to make a difference. Any thoughts about how to at least get me back to froyo?
formattdd said:
I tried to use the pantech provided gingerbread update this morning. It got about an eighth of the way through and failed. It instructed me to reboot while holding volume up and home and power. That put it in software updating mode. I tried the upgrade 3 more times, it failed at the same point each time. Now my phone is stuck in S/W Updating mode and I can't seem to get it out. I've tried pressing volume up and down for 10 seconds, and pressing volume down and home while powering on, nothing seems to make a difference. Any thoughts about how to at least get me back to froyo?
Click to expand...
Click to collapse
Nevermind, bad usb cable.
formattdd said:
Nevermind, bad usb cable.
Click to expand...
Click to collapse
Glad you got it working!
Sent from my Galaxy Nexus using Tapatalk 2
Yeah now I'm having the same regrets as above. No root.
Sent from my PantechP8000 using XDA
I am starting this thread to hopefully encourage discussion on the Lenovo A2107A-F tablet variant.
I am aware there is an existing thread on the A2107 here:
http://forum.xda-developers.com/showthread.php?t=1982334
but that thread is concentrating on the A-H (dual sim + wifi) variant which is somewhat different from the A-F (wifi only).
So far I have not found any custom rom development, which is disappointing as the stock rom leaves a lot to be desired IMHO. While the current OTA update is fine for web surfing, reading emails etc, HD video playback (particularly YouTube HD) is very poor. Also the recent OTA update forces an optimization of apps on bootup which leads to long boot times
You can root and install CWM by following steps 1-5 from the 1st post here:
http://forum.xda-developers.com/showthread.php?t=2044496
Note that "-Update 3-" mentioned in the post does not appear to work for the A-F model!
So, has anybody any leads on possible development on this tab?
Any tips on improving performance?
My first tip:
If after installing CWM you cannot get to the CWM recovery screen after powering down the device, look for for the file "/system/reboot-from-recovery.p". If it's there, either delete it or move it to some other place. This file restores the default recovery on a system reboot.
I got bitten by this a couple of times
Thanks for starting a separate thread for the A2107A-F. I'm new to Android devices and just got this one two weeks ago. I'd like to get rid of several of the apps that I have no use for and from what I understand that means I have to root it. I got lost in the details of the other thread, but I tried reading all of it. I'm on Vista and somewhere along the line I installed one of the suggested ADB drivers via PDAnet. Device Manager is showing Android Phone and under that Android ADB Interface. I wasn't sure if that matched closely enough with the step-by-step threads since I don't really think of the device as a phone, so I've been holding off on going further. I've tried using a few other drivers that were suggested in the large thread and some other threads, but Vista always tells me the current driver is the most up-to-date one.
Do you know if it's okay for it to say Android Phone rather than something else?
Thanks. I've got some other questions about the specifics of some of the other steps, but this is probably enough to get started.
My apologies in advance if my posts are too long and my questions are too basic for these forums. Feel free to point me somewhere else based on what I'm asking for. I'd honestly appreciate any leads towards my goal of getting rid of the bloat on this device and making it more responsive. (Wow! The portrait to landscape lag is really bugging me now after reading around here).
Anyway, my primary purpose is to remove the seemingly unneeded programs, services and widgets that come with the tablet. Maybe I'm just ignorant about these things, but at this time things like messaging (IMO), mapping, and some of the other default features are of no use to me. They seem to be eating up a lot of resources. I can kill some of the services I think they are associated with, but they keep popping back up.
I did watch the "noob" video (color me a tiny ant to be squashed) and did try to search for an answer to get me even started. I've read the huge main A2107A thread (80+ pages) and tried three of the suggested ADB drivers with my Vista 32 setup for my A2107A-F. The only one that even seemed to connect was ADPnet and it showed the tablet as a Android Phone. Maybe I'm just too paranoid, but after the multiple "brick" posts I'd like to make sure I'm on the right path before trying to "root" the device which appears to be the first step in removing all the extra stuff Lenovo added.
Not that it matters, but I've had the tablet for almost two weeks now and my favorite things are Slacker Radio, Scrabble, Roll It and Zen pinball. I do play Words with Friends with my wife, but I don't like it since some of the words they allow are not valid in Scrabble (which I used to play as an expert competitively face-to-face).
If you are so inclined, feel free to PM me for a Scrabble game. I promise I will not use anything other than my brain and the built in dictionary to make my plays. (I'm a bit rusty since I gave up competitive Scrabble in 2006).
So, long story short... Thanks in advance for any and all advice you can give on slimming down the Lenovo A2107A-F. And if you want an honest Scrabble challenge feel free to PM me.
As far as checking if your drivers are installed properly I would open a dos (command) prompt in window and from within the window change to the directory where you have the 4.03root files. From the command prompt type 'abd.exe shell' and you should see something like "[email protected]:/ $". If you don't see this then you will not be able to root! You need to make that USB debugging is turned on on your device you have an entry in the device manager for ADB Interface (expand on the device which you have showing up).
I am no expert, and I struggled with this on my first go also
Once rooted you can then install Titanium Backup from the play store and use it to get rid of the bloatware! Proceed with caution however as it is possible to remove critical system apps!
degsie said:
As far as checking if your drivers are installed properly I would open a dos (command) prompt in window and from within the window change to the directory where you have the 4.03root files. From the command prompt type 'abd.exe shell' and you should see something like "[email protected]:/ $". If you don't see this then you will not be able to root!
Click to expand...
Click to collapse
Thanks! That's the type of test suggestion I was looking for to make sure I was on the right path with the driver.
So has anyone tried creating a rom for this tab yet? I've been doing some research into porting another rom to work on the A2107A-F, but want to make sure there isn't one already.
I just received a notification of a new firmware update for the A2107A-F. This would be the second available update.
Has anyone else gotten this and taken the plunge yet? I'm curious if this is possibly Jellybean, as some of the larger screen IdeaTab models run this.
Sent from my IdeaTab A2107A-F using xda app-developers app
ssenemosewa said:
I just received a notification of a new firmware update for the A2107A-F. This would be the second available update.
Has anyone else gotten this and taken the plunge yet? I'm curious if this is possibly Jellybean, as some of the larger screen IdeaTab models run this.
Sent from my IdeaTab A2107A-F using xda app-developers app
Click to expand...
Click to collapse
DON'T DO THE UPDATE!!! I lost root access and now I don't know whether or not if I try to re-root if its gonna brick my tablet!
Kevin147 said:
DON'T DO THE UPDATE!!! I lost root access and now I don't know whether or not if I try to re-root if its gonna brick my tablet!
Click to expand...
Click to collapse
I lost root after applying the first update a while back. That's typical when updating. Afterward, I was able to re-root mine again using the same procedure as before. All was well. So, don't panic...yet.
Can you report on what other changes the update made? Is it Jellybean? Or maybe ICS 4.04?
ssenemosewa said:
I lost root after applying the first update a while back. That's typical when updating. Afterward, I was able to re-root mine again using the same procedure as before. All was well. So, don't panic...yet.
Can you report on what other changes the update made? Is it Jellybean? Or maybe ICS 4.04?
Click to expand...
Click to collapse
Well, I just re-rooted my tablet and everything was successful! There is absolutely no difference AT ALL with that so called "update".
Kevin147 said:
Well, I just re-rooted my tablet and everything was successful! There is absolutely no difference AT ALL with that so called "update".
Click to expand...
Click to collapse
Although I have my A2107A rooted and tweaked to my satisfaction, there are a few lingering issues that I'd hoped an update would correct:
1) The neutered Bluetooth stack. The tablet is supposed to work with Bluetooth keyboards, mice, etc. It doesn't. Although I've gotten it to talk to an external GPS module, other Bluetooth data connections simply will not work. Oh, and Bluetooth audio? Forget about it!
2) Some settings that are present in stock ICS builds are just omitted in this one. As an example, the ability to specify a default TTS voice. It's present under settings in my wife's tablet and every other ICS build I've ever encountered. Not this one!
Sent from my IdeaTab A2107A-F using xda app-developers app
Kevin147 said:
DON'T DO THE UPDATE!!! I lost root access and now I don't know whether or not if I try to re-root if its gonna brick my tablet!
Click to expand...
Click to collapse
I was rooted too, lost root access (only with some apps!) after the 130221 update Feb 28. I'll try the same root procedure as before to see if I can get it back. Glad to see a thread on the popular US version A2107A-F. Maybe someone will port Jelly Bean to this tablet! Doesn't appear Lenovo wants to do it...
Rob
I cannot get this 'update' to install after downloading. The tablet reboots to CWM during the install (I am rooted with CWM installed) and when I attempt to manually select the update.zip from /sdcard/googleota/ I get on error (status 7). In desperation I re-loaded the stock rom that I found on another thread and when the tablet attempts to update I get a "assert failed apply_patch_check( /system/app/applicationsprovider.apk)" error Anybody any ideas?
degsie said:
I cannot get this 'update' to install after downloading. The tablet reboots to CWM during the install (I am rooted with CWM installed) and when I attempt to manually select the update.zip from /sdcard/googleota/ I get on error (status 7). In desperation I re-loaded the stock rom that I found on another thread and when the tablet attempts to update I get a "assert failed apply_patch_check( /system/app/applicationsprovider.apk)" error Anybody any ideas?
Click to expand...
Click to collapse
I'm in exactly the same boat as you. I'm getting the same exact error. except that I do not have CWM installed (I am rooted though). Perhaps there's a problem with the update.zip?
Something odd that I noticed however: After the tablet reboots into recovery mode, the update fails, and I go to browse for the update.zip, the sdcard/googleota directory is missing (along with everything that follows it alphabetically). They reappear upon normal boot. I've tried copying it to a directory closer to the beginning of the alphabet and it does show up while in recovery mode. But it still will not install.
Maybe I somehow do not have the available space to perform the update? Is that possible? I show plenty of available space on both sdcards. Could we somehow be below a certain ROM space threshold necessary for an update?
I think in my case because I loaded a 'stock' rom I got from another thread, this rom is failing a verification test the update is doing before install. I do not know how to get around this! I'm continuing my search, but I am not so confident this will be resolved easily...
degsie said:
I think in my case because I loaded a 'stock' rom I got from another thread, this rom is failing a verification test the update is doing before install. I do not know how to get around this! I'm continuing my search, but I am not so confident this will be resolved easily...
Click to expand...
Click to collapse
Well, I am running a stock rom. I am unwilling to "mess with success" until there's a 100% reproducible way of recovering if it fails. And, so far, everything I've read in the other A2107A thread has been hit or miss for the A2107A-F people.
Anyway, If the update is performing a verification test, then it my "virgin stock ROM" should certainly pass it. The only thing that I did is to root it. Hmmm...could the update be testing for that and refusing to install if it detects a rooted device? I would tend to doubt that, since the previous ota update went just fine. I lost root in the process but easily reapplied it afterward.
Thoughts?
Interestingly, I flashed the A2107A-F_S483_121115 rom (again, found in another thread) as I was having verification problems with the OTA update just released from lenovo which was available from the A2107A-F_S484_121211 flashed rom. While the S483_121115 rom appears to be older, I no longer get the option to update via OTA as the tablet is telling me that my s/w is up to date! Go figure.
It's really too bad this device hasn't taken off. If I actually knew how to dev then I would start developng ROMs for it. I'm enjoying it now that I have root and got rid of bloat.
Hey guys. Just wanted to say if someone can send me a stock rom and be willing to test, I'll try to do up a good rom for the -f models. I'd use mine for the stock rom, but I've edited a lot of the system, so no go there. If you have the stock rom or want to be a tester, let me know.
So following the instructions here I rooted my LG Tribute 5 when I got it with Kingroot. And everything was fine for months. Until System Updates started to pop up regularly but I could never get them to install(they would error out). After a quick search I learned the updates won't install cuz the device was rooted. And a quick unroot would get the install to work.
I just unrooted through the kingroot app and started the updated. Before, when I tried the update it would error out about a quarter of the way through. This time the bar made it all the way to the end and then error'd out. I didn't think much of it. So since the device was stuck I took my battery out and back in. The device went through the boot process, then a No Command error popped up. Never saw that before.
So I tinkered with it a bit and kept getting the error. So I got into the Recovery Menu to do a full wipe and factory reset. I did that, but the No Command still popped up.
I know I can put a custom rom file on my external sd card and install that through recovery, right? The thing is I would like to install Slimrom, but there are a ton of downloads on the sites download page. So I'm asking for a little help on directions on a slimrom that will work on the LG Tribute 5.
And if there isn't a custom rom that works with a tribute 5,can I get a recommendation of one a custom rom that does? I'm into lightweight and minimalistic. By the way, I didn't have a custom rom on my phone, just had it rooted.
Thank you so much in advance for any and all help
No-one has any advice for me?
A little more info, the phone was on Android 5.1.1 before it started erroring out.
No-one has any advice for me?
A little more info, the phone was on Android 5.1.1 before it started erroring out.
Do you have a custom recovery as well? If it is only the stock recovery, which blocks most zips, your very option may be to use LG UP and the stock dz file and return the device to stock. The process to update can be done from that point.
I'm pretty sure I only have the stock recovery. I knew i should have installed TWRP...
So just search for LG UP and the stock firmware and they should be easily accessible?
Thanks for the reply xanscorp.
https://drive.google.com/folderview?id=0B0KV4b0_G1PQZW95ZmloejU5dFk
The LG UP program and .dz file are in there.
That's awesome! Thank you very much for linking the files for me.
I'm gonna do this in a couple hours when I get home and I'll let you know how it went.
Much appreciated xanscorp
One last stupid question... Just the LG Up and.dz files are the only two I need right?
I'm guessing so, but just wanna be sure.
Yes. It'll put you back to stock.
Unfortunately I haven't yet found how to get the ZV5 firmware fully rooted (i.e. a custom recovery) but it can be partially rooted with KingRoot. (http://www.kingroot.net/wap)
I just finally got around to giving this a shot. Sheesh....
Anyways I downloaded the files, put them on my external SD card, popped my SD card into my phone, then booted my phone to recovery. I went to install update from SD, and the phone didn't find any files. Hmmm....
I'm definitely doing something wrong. The .msi file looks like an executable. So I hopped onto Windows to install it. It installed, but when I run the program it can't find my phone when I plug it in.
I'm about to just give up, trash this thing, switch to a different provider and get another new phone. This time I won't mess with Kingroot. I'm pretty positive that's the app that screwed things up. I've had three different phones, rooted all three through different methods, and never had a problem.
Things files are to restore from a pc using LG Up for Windows... that's why it's a Microsoft Installer (.msi) file.
Yeah I figured that. But when I plug my phone into the computer my phone isn't recognized. I'm assuming because it boots straight to a No Command screen.
So since the computer doesn't recognize it neither does LG Up. Any trick to get around this?
Still haven't gotten this phone back to working. This is the first time I've really been stumped after a brick.
Please...anymore help?
Sent from my KFFOWI using Tapatalk
You find annything cause my same phone did the same thing
Sure haven't bud.
I've tried the help in the thread with no success