Database Info

[Q] Droid Charge Full backup?

I've had my Charge for a few weeks now. I've been silently reading the forum this whole time. I've downloaded the tools and I'm ready to kernel/root/rom it... But I like to be cautious. Everyone always says "HAVE A BACKUP YOU TARD!" but I can't seem to find any information on the topic pre-root.
So... Is there some way to backup everything on the phone prior to tinkering with it so I can put it back if something goes bad?
I did search.. Couldn't find anything for the droid. Lots of mentions of titanium. I downloaded it but it's for rooted phones as well.

No. Clockwork doesn't do a proper backup now. (And it doesn't back up the kernel anyway.)
Just changing the kernel and rooting won't alter anything that flashing the original kernel can't undo. So do that, get Titanium (I suggest the pro version, since it's the flasher's best friend), and use that to back up your user apps before you take the step of flashing a full ROM.

I'm a total newbie to this stuff, so this is something I've been wondering about as well.
s44- So changing the kernel and rooting you would say is a pretty safe venture to start with? I'm a fairly technical guy in general, but haven't ventured into the realm of phone rooting before, so I'm a little anxious about possibly bricking my phone right after I got it.
Is there something I would need to do beforehand to enable me to flash the original kernel, or is that just something you can always do after rooting? Thanks for any info.

We have odin. Thanks to odin we can always flash back to stock rom. If you look at the development forum you will find the stock package that no matter what you do you can always go back. Just dont mess with the radio or the pit file. Always us pda in odin unless you are flashing a new radio and you are instricted todo so. For user apps and data you can use titanium backup
Sent from my SCH-I510 using XDA Premium App

Excellent, thanks. I assume you're referring to the stock ROM at this link? http://forum.xda-developers.com/showthread.php?t=1085190
What exactly does flashing a new radio do? I'm not really familiar with the terminology

ColonelSeitan said:
Excellent, thanks. I assume you're referring to the stock ROM at this link? http://forum.xda-developers.com/showthread.php?t=1085190
What exactly does flashing a new radio do? I'm not really familiar with the terminology
Click to expand...
Click to collapse
Flashing a new radio means replacing the current modem/voice radio's software with a new/different one. There's currently no flashable radio softwares that I know of for the Charge. There are two radio softwares for the phone, though: the original version shipped with the phone, and the new one that started rolling out last week with the EE4 OTA update. That update is a patch to the old radio software (a patch is a method that changes only portion of the current software rather than overwriting the whole thing).
Hope that helps you understand a bit better.

Can't back up my phone.
I'm sorry if someone already posted this. I've been hours at it re installing ROMs. I have GummyCharged 2.0. I've tried doing a nandroid back up for the past couple of days. I've tried Rom Manager to back it up many different times and every time it shows that open box for a few seconds then it's just the android with a triangle /!\. I've tried backing up while on Recovery but at the end it can't find my SD-ext and doesnt back up. I can't find anything online relating to it. I'm gonna reinstall the stock and root it. I'll back up every time I change my phone and see when exactly it starts to fail. I'm still a noob at this.

BlackMagicNights said:
I'm sorry if someone already posted this. I've been hours at it re installing ROMs. I have GummyCharged 2.0. I've tried doing a nandroid back up for the past couple of days. I've tried Rom Manager to back it up many different times and every time it shows that open box for a few seconds then it's just the android with a triangle /!\. I've tried backing up while on Recovery but at the end it can't find my SD-ext and doesnt back up. I can't find anything online relating to it. I'm gonna reinstall the stock and root it. I'll back up every time I change my phone and see when exactly it starts to fail. I'm still a noob at this.
Click to expand...
Click to collapse
first of all don't use Rom Manager for anything on the Charge as it doesn't work right... second of all nandroid backups can be made on Gummy 2.0, you would need the most up to date CWM from Imnuts thread here: http://forum.xda-developers.com/showthread.php?t=1112804, it should be orange and version 4.0.1.4

BlackMagicNights said:
I'm sorry if someone already posted this. I've been hours at it re installing ROMs. I have GummyCharged 2.0. I've tried doing a nandroid back up for the past couple of days. I've tried Rom Manager to back it up many different times and every time it shows that open box for a few seconds then it's just the android with a triangle /!\. I've tried backing up while on Recovery but at the end it can't find my SD-ext and doesnt back up. I can't find anything online relating to it. I'm gonna reinstall the stock and root it. I'll back up every time I change my phone and see when exactly it starts to fail. I'm still a noob at this.
Click to expand...
Click to collapse
Rom Manager and the Charge do NOT work.
Make sure you're using the latest Recovery as that's the only one that's able to backup/restore and even then there's known to be issues.

Just gonna latch on here since this is a pretty recent last post...
I have recovery 4.0.0.8 and am trying to go to gummycharge GBE 2.0RC1.5, do I need to update my recovery first? I'm assuming I do to backup, but just wanted to confirm. And on the subject of updating recovery, I use ODIN just like I did for Gummy (except following what it says on that link, no auto reboot)?
Thanks, I've done enough rooting in the past, but not too familiar with CWM updating and ODIN.

JLCollier2005 said:
Just gonna latch on here since this is a pretty recent last post...
I have recovery 4.0.0.8 and am trying to go to gummycharge GBE 2.0RC1.5, do I need to update my recovery first? I'm assuming I do to backup, but just wanted to confirm. And on the subject of updating recovery, I use ODIN just like I did for Gummy (except following what it says on that link, no auto reboot)?
Thanks, I've done enough rooting in the past, but not too familiar with CWM updating and ODIN.
Click to expand...
Click to collapse
if you're trying to do a CWM backup first then yes you would need to update CWM to the latest 8/17 build which you can odin separately... odining or flashing the new Gummy rom should update your kernel and thus update CWM

What is the latest cwm for droid charge. I had 5.0 on tunderbolt now only have 3.0 on Charge.

mickrg123 said:
What is the latest cwm for droid charge. I had 5.0 on tunderbolt now only have 3.0 on Charge.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1112804

v4.0.1.4...backup no workee...MD5 mismatch!
When attempting to run a backup via CWM v4.0.1.4 I get MD5 mismatch! Yes...Im on the ROM that I'm attempting to backup. Any help would be kick [email protected]#...

Here's my 5 cents for what it's worth.
I only backup what I really need, rather than a full backup - that way I know I keep the DATA, not the old apps, outdated cache and setting etc.
To do this I use:
SMS Backup+ : Backs up SMS, Call Log
Evernote : I keep notes, screenshots, voice memos etc in sync using evernote. This of course only works if you like evernote
Eye-Fi : I move all my pictures of the phone using Eye-Fi. This cost of course, sorry, but it works (Plus you get a cool SD card for your digital camera). Other options exists, I hear a lot of good stuff about SugarSync.
Market and Amazon : All you apps are already backed up on Google Android Market or Amazon (dep. on where you bought/downloaded them from). Some people wants everything re-installed from the get go. I prefer re-install when I need it, I'm always near 4G so it literally takes seconds.
This has been working so well that I now don't think twice before factory resetting or upgrading firmware. I just do it.
Hope that helped...

[DEV & CWM Recovery for Pantech Crossover]

Forgive me if I'm posting in the wrong section. Forgive me if I'm not allowed to post here yet. Just forgive me in general. I don't want to be banned or anything like that. I'm Extremely interested in android development.
I made a working port of ClockworkMod Recovery v5.0.2.8 for the Pantech Crossover. I wanted to do this before I started tinkering around with porting cm7.2. So that I would have a way to backup, restore, and flash new roms, etc... Or else when I make a noob mistake like yesterday and have a non booting phone resulting in having to flash my old boot.img with fastboot...anyways..
DANGER: DRAGONS AHEAD
FLASH AT YOUR OWN RISK
YOU HAVE BEEN WARNED
The method I used to flash the recovery was:
1)adb push recovery.img /sdcard/recovery.img
2)flash_image recovery /sdcard/recovery.img
3)repeat step 2 (for some reason it gave me a read error out of memory the first time)
Here's the link to the custom recovery:
http :// dl. dropbox .com /u/20070520/ recovery.img
I know I'm not supposed to post links yet. Remove spaces
I just hope that there are others with the Pantech Crossover that are interested in this and the possible future development of custom roms.
Also if anyone knows if there is a good way to get ahold of koush let me know, so I can give him what he needs to hopefully add this to Rom Manager. I couldn't message him on github because he doesn't have an email set up with it

And while I'm at it. Here's the method for rooting your crossover. I'm not going to provide the files since they can easily be found with a google search.
1: Find a copy of gingerbreak.apk and copy it to your sd card
2: Enable usb debugging and allow installation of non market apps
3: Install gingerbreak
4: Root device with Gingerbreak
5: You can uninstall Gingerbreak when its completed.
Sent from my rooted PantechP8000 using XDA

Thanks so much for this! I have a friend with a crossover and is always looking for my help with making it work better. I realize this is a newer thread, I was wondering how things were coming along with CM? Anything I can do to help perhaps?

crap i need a rom to fix my crossover the buttons are no longer mapped after a hard reset. please help.

Slow
Well, it's been slow goings so far. I downloaded the open source files for the p8000 and it looks like they just built the original rom from a generic build. I've been trying to get a more customized build setup but I need to do some more reading so far. One of the problems is that instead of an akmd(2) binary for orientation and compass it uses three separate modules. Plus the hci_attach is a bit different as well and so is the bluetooth. So that significantly hampers the ease of even a basic port.
As far as the gentleman with the question about a rom to fix your device. The best I can do right now is to upload a clockwork mod backup after I do a factory reset. I don't get much time to work on this between my wife and daughter.
Also, do you have adb access to your device? Surely it wouldn't be too difficult to adb push the correct keymapping files back to your phone.
You say a hard reset messed up your mappings? What problems were you experiencing prior to the reset?

Crossover
Hello,
I just wanted to let you know that there are people watching your thread. I am very interested in this as my parents have Crossovers and have recently rooted and unlocked them (well, I did) and set them up to work on Net10.
The only issue I've noted is that there are some failures, like the Market refusing to install apps no matter what is done. I'm going to install your ClockworkMod in hopes that later it might be useful.
I realize there isn't a large development scene for the P8k yet, and maybe there won't be but it's always a great hope that those with the capabilities might take pity. I was almost thinking that it might be my foray into actually looking deeper at the code than the small bit I've done.
Kind Regards,
Kaylus

Yup
kaylus said:
Hello,
I just wanted to let you know that there are people watching your thread. I am very interested in this as my parents have Crossovers and have recently rooted and unlocked them (well, I did) and set them up to work on Net10.
The only issue I've noted is that there are some failures, like the Market refusing to install apps no matter what is done. I'm going to install your ClockworkMod in hopes that later it might be useful.
I realize there isn't a large development scene for the P8k yet, and maybe there won't be but it's always a great hope that those with the capabilities might take pity. I was almost thinking that it might be my foray into actually looking deeper at the code than the small bit I've done.
Kind Regards,
Kaylus
Click to expand...
Click to collapse
I haven't had any problems with the market refusing to install apps but I do sometimes run across the no connection error with the market when on wifi. Although I did notice this before I rooted my crossover. Sometimes disabling and re-enabling the wifi helps. I really do think it is a bug somewhere in the original rom.
As far as the custom recovery image. Everything seems to be working pretty good. I use it mainly for restoring previous backups. I would say I've restored my backup at least a dozen times. Occasionally it states there was an error restoring .android secure but I have yet to track that down. I need to double check the recovery.fstab to make sure I have everything set right for the mount points.

stevotdo said:
I haven't had any problems with the market refusing to install apps but I do sometimes run across the no connection error with the market when on wifi. Although I did notice this before I rooted my crossover. Sometimes disabling and re-enabling the wifi helps. I really do think it is a bug somewhere in the original rom.
Click to expand...
Click to collapse
I'm actually completely stuck at this point. I'm rooted, unlocked, different carrier, APN set correctly. I can access data and voice -- but it just hangs at "Downloading..." on the market. If I factory reset it works initially but after reboot it fails. I'm not quite sure why this occurs and if it is just this phone or a side-effect of using it on a different carrier.
Strangely Wi-fi doesn't resolve it.
As far as the custom recovery image. Everything seems to be working pretty good. I use it mainly for restoring previous backups. I would say I've restored my backup at least a dozen times. Occasionally it states there was an error restoring .android secure but I have yet to track that down. I need to double check the recovery.fstab to make sure I have everything set right for the mount points.
Click to expand...
Click to collapse
I'll give your recovery a run and let you know, if you manage CM7 let me know I know it's a big undertaking. Thanks for the response.

Market Error
As far as the Android Market hanging. I see a few references to it being cause by the .android_secure folder becoming corrupted on the sd card.
One temporary fix suggest moving all the installed apk's back to the phone memory and deleting the .android_secure folder. Then rebooting and moving those apps back to the sd card.
That seems like some wasted time if it doesn't happen to work. I would just turn the phone off, remove the sdcard, and restart (granted any apps that were moved to the sdcard wont work until it is reinserted.) Then I would try to download and install an app. If that works then shutdown, insert sd, and reboot.
I'm really curious if the problems with .android_secure that you and i are having aren't just more bugs in the original rom.

Just as a poster above me said, I am watching this thread and really appreciate everything you are doing. Thanks again.

Well I appreciate the support. I just hope to be able to offer a rom sometime soon. Unfortunately I won't have anymore free time till Tuesday
crimson12 said:
Just as a poster above me said, I am watching this thread and really appreciate everything you are doing. Thanks again.
Click to expand...
Click to collapse

Not an issue, life first, then android development.
Sent from my Galaxy Nexus using Tapatalk

Pantech Crossover Update
Ahhhhh check out the pantech support page for the crossover. They finally have the Gingerbread update.
http:// pantechusa. com/xupgrade/ remove spaces.
Which is great because I soft bricked my phone (don't ask) and this was going to be the only way to fix it.

stevotdo said:
Ahhhhh check out the pantech support page for the crossover. They finally have the Gingerbread update.
http:// pantechusa. com/xupgrade/ remove spaces.
Which is great because I soft bricked my phone (don't ask) and this was going to be the only way to fix it.
Click to expand...
Click to collapse
Oh hell yes finally. Thanks for the notice!
Sent from my Galaxy Nexus using Tapatalk

Mildly related, but have you figured out how to root the gingerbread ROM? I've tried ginger break to no avail.
Sent from my Galaxy Nexus using Tapatalk 2

anyone have a stock image of the 2.2 for android my phone came preupgraded to 2.3.6 and i would like to have it rooted over being on gingerbread since a root method hasnt been found yet for the new firmware

Bricked?
I tried to use the pantech provided gingerbread update this morning. It got about an eighth of the way through and failed. It instructed me to reboot while holding volume up and home and power. That put it in software updating mode. I tried the upgrade 3 more times, it failed at the same point each time. Now my phone is stuck in S/W Updating mode and I can't seem to get it out. I've tried pressing volume up and down for 10 seconds, and pressing volume down and home while powering on, nothing seems to make a difference. Any thoughts about how to at least get me back to froyo?

formattdd said:
I tried to use the pantech provided gingerbread update this morning. It got about an eighth of the way through and failed. It instructed me to reboot while holding volume up and home and power. That put it in software updating mode. I tried the upgrade 3 more times, it failed at the same point each time. Now my phone is stuck in S/W Updating mode and I can't seem to get it out. I've tried pressing volume up and down for 10 seconds, and pressing volume down and home while powering on, nothing seems to make a difference. Any thoughts about how to at least get me back to froyo?
Click to expand...
Click to collapse
Nevermind, bad usb cable.

formattdd said:
Nevermind, bad usb cable.
Click to expand...
Click to collapse
Glad you got it working!
Sent from my Galaxy Nexus using Tapatalk 2

Yeah now I'm having the same regrets as above. No root.
Sent from my PantechP8000 using XDA

[Q] Motorola Defy default restore

Hello, I have a Motorola Defy which i have rooted and installed clockworkmod on it. I tried to install Cyanogen mod 7.1 from the website. The phone got to the boot screen where it continued to cycle through it thing and nothing more. I restarted the phone and now it gets stuck at the first screen where its says "google". I tried to enter recovery again (power + volume down) and clockworkmod is completely gone. I want to go back to the stock OS so it atleast works again. Ive tried using the update.zip option in the stock recovery mode but I keep getting an error "failed to verify whole-file signature" when using a signed copy of cyanogen mod. I also tried putting my backup in a zip with the same error. Ive even tried formatting my sd card. What do i do?

I was more or less where you are around June or so. I'm no expert by any means, but perhaps I can help. If memory serves I used a program called RSD Lite to flash it back to the stock unlocked rom I got from the "bl7 finally rooted" thread - if you unlocked a different way, I'd try to find your original rom.
Once you get to where you understand how to get back to stock it makes the whole thing a lot less scary, or it did for me. Once you get back up and running, try flashing Whiterabbit. I didn't have luck getting anything else to run, but that one worked the first time I tried it, and I'm very happy I persevered. Miles better than the stock OS.

Marvelicious75 said:
I was more or less where you are around June or so. I'm no expert by any means, but perhaps I can help. If memory serves I used a program called RSD Lite to flash it back to the stock unlocked rom I got from the "bl7 finally rooted" thread - if you unlocked a dirrerent way, I'd try to find your original rom.
Once you get to where you understand how to get back to stock it makes the whole thing a lot less scary, or it did for me. Once you get back up and running, try flashing Whiterabbit. I didn't have luck getting anything else to run, but that one worked the first time I tried it, and I'm very happy I persevered. Miles better than the stock OS.
Click to expand...
Click to collapse
I cant use the program as my phone doesnt get detected when connected to my pc.

OK, lets start with the basics, if I can remember it right... Have you used RSD Lite successfully before this? Drivers installed? Using bootloader mode? If any of this is unfamiliar go hit the beginner's thread - if you have done all this you may be beyond my help and in need of someone a bit more experienced.

Marvelicious75 said:
OK, lets start with the basics, if I can remember it right... Have you used RSD Lite successfully before this? Drivers installed? Using bootloader mode? If any of this is unfamiliar go hit the beginner's thread - if you have done all this you may be beyond my help and in need of someone a bit more experienced.
Click to expand...
Click to collapse
I fixed it, there were a different set of buttons to hold to get into boot loader. The default recovery was not over written as i thought (happened to all my other phones). Thank you very much for you help. It has been very much appreciated.

Glad to hear it.

[Q] Help! Searched for solution for hours.

My Atrix 2 is currently having some serious issues. Last night I rooted it. I changed the boot animation to what was supposed to be a human eye turned droid eye or something. When I rooted it and attempted to install Safestrap it didn't install correctly. As I am inexperienced with rooting android phones, I didn't think it'd hurt. I don't know if it did. When I rebooted to see the animation it just said android in silver letters with light flashing across it and it never got past that. I did several hard resets to see if that would fix it, after trying multiple battery pulls of course, and nothing. The phone is now dead and won't charge, when I plug it in it just shows the Motorola logo and doesn't do anything, but if I unplug it the logo doesn't go away. Help, please!

CreativeSin said:
My Atrix 2 is currently having some serious issues. Last night I rooted it. I changed the boot animation to what was supposed to be a human eye turned droid eye or something. When I rooted it and attempted to install Safestrap it didn't install correctly. As I am inexperienced with rooting android phones, I didn't think it'd hurt. I don't know if it did. When I rebooted to see the animation it just said android in silver letters with light flashing across it and it never got past that. I did several hard resets to see if that would fix it, after trying multiple battery pulls of course, and nothing. The phone is now dead and won't charge, when I plug it in it just shows the Motorola logo and doesn't do anything, but if I unplug it the logo doesn't go away. Help, please!
Click to expand...
Click to collapse
Phew, that was close. Hello and welcome to the help section of the A2 forum, for starters the trouble you're facing right now is called soft bricking. It's a very common problem, but is usually solved by flashing the correct ICS sbf for your region.
So firstly, is your phone branded AT&T or is it from another region? Please specify which. Next you need to recharge your battery externally either by an external battery charger or the Mcgyver method. (search the forum for more details).
After you've charged your battery up enough, put it back in your phone and put your phone into fastboot mode by holding the volume down button + power button and make sure it says 'Battery OK'.
After making it this far, you'll need RSD lite order to flash/install the sbf files. If everything goes fine without failure, then your phone will be back to stock and you've saved it! Here's a thread that has content that should guide you with further details: http://forum.xda-developers.com/showthread.php?t=2245825 Good luck!
Sent from the Ace's MB865 using xda-developers app

Aceofzeroz said:
Phew, that was close. Hello and welcome to the help section of the A2 forum, for starters the trouble you're facing right now is called soft bricking. It's a very common problem, but is usually solved by flashing the correct ICS sbf for your region.
So firstly, is your phone branded AT&T or is it from another region? Please specify which. Next you need to recharge your battery externally either by an external battery charger or the Mcgyver method. (search the forum for more details).
After you've charged your battery up enough, put it back in your phone and put your phone into fastboot mode by holding the volume down button + power button and make sure it says 'Battery OK'.
After making it this far, you'll need RSD lite order to flash/install the sbf files. If everything goes fine without failure, then your phone will be back to stock and you've saved it! Here's a thread that has content that should guide you with further details: http://forum.xda-developers.com/showthread.php?t=2245825 Good luck!
Sent from the Ace's MB865 using xda-developers app
Click to expand...
Click to collapse
As RSDLite was rebooting my phone I checked the forums and saw this! Hahah but thank you very much! This is pretty much exactly what I ended up doing. I posted this and then read up on the forums rules and some stuff and realized I should really learn to help myself if I want to . Took some time and a lot of mistakes but I put it together. Thank you very much for the reply.

CreativeSin said:
As RSDLite was rebooting my phone I checked the forums and saw this! Hahah but thank you very much! This is pretty much exactly what I ended up doing. I posted this and then read up on the forums rules and some stuff and realized I should really learn to help myself if I want to .
Took some time and a lot of mistakes but I put it together. Thank you very much for the reply.
Click to expand...
Click to collapse
You're welcome :thumbup: I'm glad it all worked out for you in the end. I still remember the time earlier this year when I just got my phone, went crazy with mods and ended up softbricking it for a whole week. It was hell just to get it working again cuz RSD Lite decided to hate me from the get-go. -_-
So I'm glad to help others out with this, but enough rambling lol, take greater care for the next flashes you do until you get used to it!
Sent from the Ace's MB865 using xda-developers app

Aceofzeroz said:
You're welcome :thumbup: I'm glad it all worked out for you in the end. I still remember the time earlier this year when I just got my phone, went crazy with mods and ended up softbricking it for a whole week. It was hell just to get it working again cuz RSD Lite decided to hate me from the get-go. -_-
So I'm glad to help others out with this, but enough rambling lol, take greater care for the next flashes you do until you get used to it!
Sent from the Ace's MB865 using xda-developers app
Click to expand...
Click to collapse
Thanks! Just got it all rooted again no problem. I'm trying to learn all this, any tips on something I could start working on?

CreativeSin said:
Thanks! Just got it all rooted again no problem. I'm trying to learn all this, any tips on something I could start working on?
Click to expand...
Click to collapse
Well now that you're back and rooted, if you're planning on doing any more flashing any time soon then I recommend you install boot menu manager. If you've previously installed safestrap or bootstrap, clear their data and uninstall them before installing bmm.
With that done, you've just made your phone a little safer from bricking because bmm allows multi rom booting, which are somewhat independent of the primary system. Refer to this thread for more info on how to make systems, etc.: http://forum.xda-developers.com/showthread.php?t=2115715
The first thing you'd want to do is make sure your apps/data is always backed up at all times with apps like titanium backup. Create 2 or more systems so that you can try the bmm compatible custom ROMs which are in the dev section if you want to try any of them. But please, read all instructions, warnings, requirements, etc. carefully before attempting any flashing in general.
The thread I posted in my earlier post above will have links to the specific custom ROMs. If you're doing any other kind of flashing, make sure to again, read instructions carefully and take your time with learning all of this.

Hi, I soft bricked my phone recently.
I was running stock ICS from Moto on a rooted Atrix 2. I wanted to upgrade it to JB so I installed Atrix 2 bootstrap and clicked Bootstrap Recovery (gave superuser permission) and then Reboot Recovery. It went into CWM and I wiped factory data and cache. Before I installed the JB zip I backed up my old ICS via CWM and then installed CyanogenMod-Dev-edison-nightly-20130401-2132-signed.591fan.com zip.
It was upgraded successfully to 4.2.2 but I couldnt get my updated contacts from the Super Recovery app, so I thought to restore the old ICS and backup the contacts once again. I installed Atrix 2 bootstarp apk again and went thought the same process ( Bootstrap recovery > gave Superuser permission > Reboot recovery). As soon as it rebooted the Motorola logo came on and after that the phone gave dark grey screen. I tried rebooting and going into CWM on startup but it didnt give the option of install zip from sd card as it did on my earlier attempt.
I am stuck with a bricked phone and all my work is stuck up.
I read about RSDlite but I have heard it causes hard bricking on several occasion. So, I am a bit cautious about using it and I dont know the exact procedure to use it also. Can you please guide me on how to regain my phone from this soft brick and where i went wrong during my installations.
Any help would be very much appreciated. Thanks a lot in advance.

kunal2711 said:
Hi, I soft bricked my phone recently.
I was running stock ICS from Moto on a rooted Atrix 2. I wanted to upgrade it to JB so I installed Atrix 2 bootstrap and clicked Bootstrap Recovery (gave superuser permission) and then Reboot Recovery. It went into CWM and I wiped factory data and cache. Before I installed the JB zip I backed up my old ICS via CWM and then installed CyanogenMod-Dev-edison-nightly-20130401-2132-signed.591fan.com zip.
It was upgraded successfully to 4.2.2 but I couldnt get my updated contacts from the Super Recovery app, so I thought to restore the old ICS and backup the contacts once again. I installed Atrix 2 bootstarp apk again and went thought the same process ( Bootstrap recovery > gave Superuser permission > Reboot recovery). As soon as it rebooted the Motorola logo came on and after that the phone gave dark grey screen. I tried rebooting and going into CWM on startup but it didnt give the option of install zip from sd card as it did on my earlier attempt.
I am stuck with a bricked phone and all my work is stuck up.
I read about RSDlite but I have heard it causes hard bricking on several occasion. So, I am a bit cautious about using it and I dont know the exact procedure to use it also. Can you please guide me on how to regain my phone from this soft brick and where i went wrong during my installations.
Any help would be very much appreciated. Thanks a lot in advance.
Click to expand...
Click to collapse
Use boot menu manager instead of bootstrap recovery
Sent from my MB865 using XDA Premium 4 mobile app

[Q] Tab 2 10.1 touch screen stops after a couple minutes

Ok guys, almost first post here, now that its in the right spot. My galaxy tab 2 10.1 model GT-P5113TS is having an issue that I can't seem to find on any site including this one.
Little background, this problem first started several months ago. My wife ran the battery completely dead on the tab, we didn't have a "samsung" charger and couldn't get it to charge up. Bought new charger, got it charged, and ever since then, the screen will work for anywhere from 15-20 seconds to 3 or 4 minutes, then just stops working. Hitting the power button will turn the screen off, hitting it again brings up the lock screen, but the screen will still not recognize any touches. The side buttons still work, just not the touch screen.
Letting the tab sit for a couple hours is the ONLY thing that gets the touch screen working again. But it will only work for a minute or two again before it stops working... again... I tried a soft reset several times to no avail. Kind of forgot about the tab, left it for a few months. Picked it up yesterday after charging it and still no different than a couple months ago. I tried the factory wipe/reset several times using the power and volume buttons and it made no difference. Usually the screen won't stay responsive long enough to make it through the whole set up process.
I'm pretty new to digging into these things. I'm not afraid to give it a shot, since the thing is useless in its current state. But most of the lingo and abbreviations are new to me. If anyone can point me towards a solution, I'd be VERY grateful! I'll do my best to answer any questions to help as well.
PS, we bought it used off ebay, so no warranty. It worked fine for almost a year before this started.

Bump for a little help? Thanks in advance! :good:
Edit: Should also mention that it's 100% unmodified/stock. I haven't rooted it or been inside it or anything. Very open to trying about anything since like I mentioned, it's useless to me as it sits currently.

You can't do much with the screen the way it is, your best bet is to root and flash a custom rom.
Look in development for a root method and install a custom rom using Odin. Check out You tube for videos on the matter you should find several.
Pp.

Help!
PanchoPlanet said:
You can't do much with the screen the way it is, your best bet is to root and flash a custom rom.
Look in development for a root method and install a custom rom using Odin. Check out You tube for videos on the matter you should find several.
Pp.
Click to expand...
Click to collapse
For me th einstalled custom CM11 rom nighlty boots but seems to drop all kinds of android processes. Ik keeps showing all kinds of zip files in the download area. Installed apps can be deeted but are back after reboot. Can't find sd-ext.
Installing stock of custom rom with Odin goes ok for a while but fails all te time.
Is there a low level kind of remedy?
Thanks!

Can you get into recovery?
Use any previous nandroid.
You do have nandroid b/u's ?
Pp.

PanchoPlanet said:
Can you get into recovery?
Use any previous nandroid.
You do have nandroid b/u's ?
Pp.
Click to expand...
Click to collapse
Yeah, I can boot into recovery where it gives me the options to install from SD card etc. And I have to use the power and volume buttons to navigate the options. Thats how I tried the factory reset the first time, to no avail.
I don't have any other backups or anything to try. Where would I go about finding something to use?

Your only option is to reflash your rom or the stock firmware in order to fix the issue.
Use Google to search for the stock firmware, you will have to root again and install CWM.
Pp.

PanchoPlanet said:
Your only option is to reflash your rom or the stock firmware in order to fix the issue.
Use Google to search for the stock firmware, you will have to root again and install CWM.
Pp.
Click to expand...
Click to collapse
Is there an easy to follow how-to for rooting it somewhere? Ideally a way that doesn't involve using the touch screen, since mine is obviously on the fritz.
I'm assuming to reflash the stock files, I'll need to (figure out what files) save them to the SD card then select the restore from SD card option in the recovery menu?
I'm a noob to this stuff, so not familiar at all with the abbreviations and what not. (What is CWM?) But I'm fairly competent if things are broken down to the basic steps and what not.

Well looks like I'm answering my own questions a little bit, but it looks like I can download the VRoot program onto my computer, along with the Samsung USB drivers, and use that program to root the tablet..... correct?
Then download Odin to flash the files?

Not familiar with Vroot, need to look it up.
The first thing you need to do is flash the stock Samsung firmware in Odin (using download mode ) . Afterwards you run your tablet for a while, 2 to 3 hours and make sure it's OK (touch screen wise) , then you can root and flash roms.
Pp.

So I don't need to root it to flash in the firmware, just if I were to flash a rom? Sounds simple enough.
Next (noob) question. Does the firmware have to match with the version of android running on the tablet? I'm not sure what version is on it, I'll have to look after work. Or can I just get the latest firmware update for my model and use that? Looks like for my model there's a version 4.2.2 that says Canada. That seems to be the newest one out there. Is that what I'll want to use?

Follow this video and you should have success. They have an apparent source for the firmware, otherwise you have to download from Samsung and that can take days.
Pp.
http://m.youtube.com/watch?v=A40XVvPPbe0

After watching video there are further steps to fully wipe and factory restore , you don't have to go this far unless you want to make tab new like out of the box.
Pp.

Over the weekend I found a site that had the correct factory firmware, and I was able to download it, install Odin, and flash the firmware into my tablet. I followed the steps for the beginning portion of that video posted and was able to get it done. I then wiped all data and the cache and now I'm happy to report that its back to working like it should! Basically saved me from trashing a $200+ tablet!
Thank you guys so much for the help! And thanks to everyone that makes this site possible. Awesome to have people with this level of knowledge in one place and so willing to help!
:good::good: