Related
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
matutecarp99 said:
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
Click to expand...
Click to collapse
It's because the firmware overwrite cwm with stock recovery, you must root it or directly flash custom ROM. Or use the trick from the first replier.
Sent from my GT-I9082 using Tapatalk
CWM
vahid8910 said:
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
Click to expand...
Click to collapse
Thanks for responding! I have android 4.2.2 and my version of CWM is 6.0.4.5 this tutorial you sent me is for android 4.1 and the version of CWM "cwm-permanentor.zip" which is not .. I hope I help a friend!
No if you can help me with this, but never flashee one custom rom, I wanted to know if I could help install one with all precautions and detail because it's my first time .. ONLY IF POSSIBLE
I have the GT-I9105P with root and xposed and mods and tweaks. Thanks in advance!
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
CWM
vahid8910 said:
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
Click to expand...
Click to collapse
Risk of brick? or something similar? I have to flash with CWM?
matutecarp99 said:
Risk of brick? or something similar? I have to flash with CWM?
Click to expand...
Click to collapse
install it with CWM,
idk about brick, mine didn't brick.
CWM
I'm done updating my CWM to v6.0.4.5 right now... and it works perfectly
..
From Samsung S2+ (I9105P rooted ) running on CWM v6.0.4.5 android 4.2.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
CWM
matutecarp99 said:
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
Click to expand...
Click to collapse
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
You install it and always comes into CWM now thank you very much to all!
Could pass me the link of the tutorial to install android 4.4.2 rom kitkat? YOU!
Cyanogenmod 11
Elucidator21 said:
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
Click to expand...
Click to collapse
You Might Pass the link CM11 kitkat 4.4.2? Finish Install CWM UN while ago! : D
And tell me What son of ESA rom errors
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
CWM
vahid8910 said:
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
Click to expand...
Click to collapse
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
matutecarp99 said:
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
Click to expand...
Click to collapse
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
vahid8910 said:
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
Click to expand...
Click to collapse
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
matutecarp99 said:
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
Click to expand...
Click to collapse
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GApps http://wiki.cyanogenmod.org/w/Google_Apps
Cyanogenmod 11
Elucidator21 said:
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GooleApps http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
I already have backup done, I have "gapps-20140105-signed.zip-kk" 83.1 MB and "cm-11-20140121-UNOFFICIAL-s2vep.zip" 196 MB internal memory and external SD (I have them in the 2 memories just in case) now I have to flash. 1 -. CM11 In CWM select install if and same with gapps and reboot system now? No need to do anything WIPES dalvin cache etc. .. please explain it step by step I would not bricking THANKS
PD: I have root, I have seeder (tweak) a few mods and xposed. Also I mount folder (to passing games to external sd)
It should be checked usb debugging? And where I have to leave the backup made?
What are the bugs? I'll be able to reinstall xposed? Also change the DPI of 240-210
ALL THAT I MADE MY GALAXY S2 PLUS (I9105P)
you need to wipe it 1st before flashing CM11 and Gapps...
Cyanogenmod 11
Elucidator21 said:
you need to wipe it 1st before flashing CM11 and Gapps...
Click to expand...
Click to collapse
I tell you the steps you do and tell me if I do something wrong:
1.-Wipe data factory reset
2.-Wipe cache partition
3.-Install zip from sd card, CM11
4.-Install zip from sd card, GAPPS
5.-Reboot system now
If you do these step Ships all well? THANKS
I have the MT7 TL10 international. The phone is rooted, BL unlocked and CWM installed. Today I received notification that an OTA update on B123 is available. I think I've read somewhere that the update will not work with CWM so I have to go back to stock recovery. I know how to do that but I just want to confirm with you experts whether or not IT is needed.
And in case I go back to stock recovery, do I just have to flash CWM again after the ROM update and it's all good again?
Thanks in advance for your feedback-much appreciated
sweetsmoke69 said:
I have the MT7 TL10 international. The phone is rooted, BL unlocked and CWM installed. Today I received notification that an OTA update on B123 is available. I think I've read somewhere that the update will not work with CWM so I have to go back to stock recovery. I know how to do that but I just want to confirm with you experts whether or not IT is needed.
And in case I go back to stock recovery, do I just have to flash CWM again after the ROM update and it's all good again?
Thanks in advance for your feedback-much appreciated
Click to expand...
Click to collapse
what you mean IT needed ??!?!?
Just flash stock and do OTA
Sorry Typo. I mean ....whether or not it's needed to go back to stock recovery prior to making the OTA update
sweetsmoke69 said:
Sorry Typo. I mean ....whether or not it's needed to go back to stock recovery prior to making the OTA update
Click to expand...
Click to collapse
what you mean typo ????? chipmunk
Simona Simmy said:
what you mean typo ????? chipmunk
Click to expand...
Click to collapse
Dear Simona,
thank's for your reply. If I get you correctly IT is needed to go back to stock recovery before flashing the OTA update.
But what about my second question. If I flash CWM after the ROM update, will the phone still be rooted, BL unlocked, CWM recovery and SU installed?
My apologies if this is a silly question, but I'm not an Android expert - just an user....
sweetsmoke69 said:
Dear Simona,
thank's for your reply. If I get you correctly IT is needed to go back to stock recovery before flashing the OTA update.
But what about my second question. If I flash CWM after the ROM update, will the phone still be rooted, BL unlocked, CWM recovery and SU installed?
My apologies if this is a silly question, but I'm not an Android expert - just an user....
Click to expand...
Click to collapse
yes don't worry all be still rooted/unlocked..
Hi, I have d838 with stock 20a firmware. I rooted it with 1click root, but do not know how and which recovery to install.
I tried F350D838RECOVERY_KK_LOLLIPOP.apk- it said installed ok after grant root access, but when say reboot recovery it stuck at LG logo...
please help...
ivanox1972 said:
Hi, I have d838 with stock 20a firmware. I rooted it with 1click root, but do not know how and which recovery to install.
I tried F350D838RECOVERY_KK_LOLLIPOP.apk- it said installed ok after grant root access, but when say reboot recovery it stuck at LG logo...
please help...
Click to expand...
Click to collapse
Move to Q/A section .
U cant install recovery like that , u have to be at 4.4 then root it , and flash recovery , then flash Lolipop rom . Only like that u will be able to go in recovery and flash what ever u like . Search forum before posting . But first of all u must flash KDZ file to your phone to get rid of bootloop .
milance92 said:
Move to Q/A section .
U cant install recovery like that , u have to be at 4.4 then root it , and flash recovery , then flash Lolipop rom . Only like that u will be able to go in recovery and flash what ever u like . Search forum before posting . But first of all u must flash KDZ file to your phone to get rid of bootloop .
Click to expand...
Click to collapse
Or use this http://pan.baidu.com/s/1mgHZuLM
It's Chinese Language,but its easy.
Lollipop musst be installed (KDZ)
Your GP2 must be rootet.
Download this Package and unpack it.
Enable USB Debugging on GP2
Klick exe in the unpacked zip Folder.
Accept the Superuser Question on your Display
and Press 1 on your Pc Keyboard and wait to finish the Process.
You have an Recovery (chinese) on Lollipop Software.
Want the English Recovery,install the LP-KK apk
This works fine for me.
Sorry for my Bad English!
I have stock lollipop, is it ok for this method? Thanks a lot...
ivanox1972 said:
I have stock lollipop, is it ok for this method? Thanks a lot...
Click to expand...
Click to collapse
Yes,its ok for Stock LP
Uploaded?
ivanox1972 said:
Uploaded?
Click to expand...
Click to collapse
Sorry i forgot this.
Here is the new Link
D838 Recovery
thanks, friend. perfectly ease, in 2 minutes recovery on English installed...
Now I canbackup and be free in customization. But, not too many things to try. My opinion is that we badly need cm 12 to extend life of this mighty and great phone.
thanks again, later I will install your 20d rom but not expect much new... And probably xposed...
letschky said:
Sorry i forgot this.
Here is the new Link
D838 Recovery
Click to expand...
Click to collapse
Hi
I now have philz recovery in English thanks to you.
But does this procedure also unlocked bootloader or not?
How can I check if my bootloader is locked
Sent from my LG-D838 using Tapatalk
Sm0L said:
Hi
I now have philz recovery in English thanks to you.
But does this procedure also unlocked bootloader or not?
How can I check if my bootloader is locked
Sent from my LG-D838 using Tapatalk
Click to expand...
Click to collapse
I can't say is the Bootloader really unlocked.
This files are from chinese Forum.
Important is the Recovery and root works.
Another Question,works your cam with the english Recovery?
letschky said:
I can't say is the Bootloader really unlocked.
This files are from chinese Forum.
Important is the Recovery and root works.
Another Question,works your cam with the english Recovery?
Click to expand...
Click to collapse
Yes, camera works with the english recovery, i am on v20a HONG KONG
Is there a way i can find if bootloader is unlocked?
aha,my cam doesn´t work with the english recovery,with chinese recovery works fine,no idea why.
I do not know how could look for ways the bootloader.
letschky said:
aha,my cam doesn´t work with the english recovery,with chinese recovery works fine,no idea why.
I do not know how could look for ways the bootloader.
Click to expand...
Click to collapse
So you don't know who made this recovery? I would like to know if this is using a KK bootloader or a LP bootloader.
If I install chinese recovery? How to go back to stock recovery when needed?
Hi!, I tried to update my Mate 7 to B513, but is failed, so I want to flash another ROM with a custom recovery, but when I go into recovery my phone reboots every time.
Can someone help me? I already tried twrp and cwm, what did I do wrong?
Ps: sorry for my bad english, I'm dutch
NielsvdS said:
Hi!, I tried to update my Mate 7 to B513, but is failed, so I want to flash another ROM with a custom recovery, but when I go into recovery my phone reboots every time.
Can someone help me? I already tried twrp and cwm, what did I do wrong?
Ps: sorry for my bad english, I'm dutch
Click to expand...
Click to collapse
Hi, try rollback your phone with a external SD card.
https://mega.nz/#!Z15DQYbZ!aATEeAhXw6_FObeTPVIi-zeqcBMSj6zImqELFknyKqI
How to remove TWRP and install stock recovery?
I do not have original recovery.img, where can I find him?
Clean Start.
Hey Dancho21,
Dancho21 said:
How to remove TWRP and install stock recovery?
I do not have original recovery.img, where can I find him?
Click to expand...
Click to collapse
Assuming that you at least have stock os on the device you can install Samsung Kies on a pc, plug the device in and use Kies to restore your os to stock.
Note: This will not hide the fact that you have altered your phone and your warranty will still be invalid.
As I am new to the forum I am unable to post a link so my recommendation is to google "reinstall stock rom kies".
Good Luck.
-Tommo
Dancho21 said:
How to remove TWRP and install stock recovery?
I do not have original recovery.img, where can I find him?
Click to expand...
Click to collapse
Hi mate
Try this
Thanks, guys.