I can load fine into fastboot, yet RSD Lite keeps giving me a getvar error. If anybody has a factory xml, or an xml that will work, or can help me in anyway, it would be much appreciated.
SmgHunter said:
I can load fine into fastboot, yet RSD Lite keeps giving me a getvar error. If anybody has a factory xml, or an xml that will work, or can help me in anyway, it would be much appreciated.
Click to expand...
Click to collapse
Make sure that all the drives are install. I had the same issue with a Motorola photon, and the drives was the problem
Sent from my SCH-I535 using xda app-developers app
U try a factory reset yet
Would that let it boot?
Sent from my DROID RAZR HD using xda app-developers app
I deleted the getvar lines and viola, flashed perfectly.
Razr HD Wont reboot
Link is posted by a user in below thread
http://forum.xda-developers.com/showthread.php?t=1946551
Hope it helps!
Thanks
I have the same whith Operator rom. getvar error unknow command.
i have just edited xml file and drop the line with getvar. I have realized 3flash like this. no probleme.
Amei
sam sun
Related
Hi XDA,
i tried to install Cyanogenmod 7 with guide listed in
http://forum.xda-developers.com/showthread.php?p=17495710
but i stuck with RSDlite not showing/starting the sbf file...
does anyone having such issue, pl let me know the way to get rid of this....
thanks
Hi
Check make sure moto usb drivers are working.
Rds lite if issues try reinstalling.
Sent from my XT720 using XDA Premium App
mchlbenner said:
Hi
Check make sure moto usb drivers are working.
Rds lite if issues try reinstalling.
Sent from my XT720 using XDA Premium App
Click to expand...
Click to collapse
thanks for your reply
benner, i tried with other sbf files thru RSDlite with my phone and i can able to flash but i can't able to do anything with Korean 2.2.1 sbf file. is there any other problem with my phone / settings?
h t t p : // xt720.ru /Files /Firmware/korean_2.2.1.zip
is any wrong with this file?
cheers
Hi
So rsdlite doest see korean sbf file.
Try to redownload it could be a bad file.
I don't flash with that korean 2.2.1 I use a diffrent one by say.
Moto drivers ok
Unzip file ok
Just what it could be I have not had this problem.
Sent from my XT720 using XDA Premium App
Boot into bootloader mode and plug in your phone through USB.
You can turn on into bootloader mode by taking out the battery, pressing power+volume down+shutter button, and putting in the battery. This takes some practice and you might not get it the first time.
I suggest that you don't install cm7 because the sensors are not working and most of us wouldn't use it as an everyday ROM, except for maybe mchlbenner. Its also going to be a hassle flashing back a milestone xt720 ROM... I'm staying on cm6 until mz makes us a cm7 ROM from the source code.
Sent from my MilestoneXT720 using XDA App
You can also go into bootloader by just holding camera, volume up, and power button
Sent from my Google Nexus S using xda premium
Earlier today my phone was acting up, not sending messages. So i did a soft reset. Now when I turn it on, all I see is Boot loader D0.11 Battery OK Program OK connect USB cable.
I've tried to flash 2 SPF's. It was rooted recently, and had the latest updates. Everything was fine untill I did the soft reset.
What is causing it to keep returning to the boot loader screen?
Also, when I try to flash it via RSD Lite i keep getting Error switching to pass through, or something simular to that.
Ive tried 2 SPF's and factory reset, cache format, all that.
I have to have this phone for work, so any prompt help would be greatly appreciated.
Hey man that exact same thing happened to me. You are going to need to SBF to stock. 1KDS has a nice tool out there. It is a mini linux distrobution that you burn to a CD and boot up on it. Just google ezSBF by 1KDS. Hope this helped
Sent from my DROID2 GLOBAL using XDA App
skript_kidee said:
Hey man that exact same thing happened to me. You are going to need to SBF to stock. 1KDS has a nice tool out there. It is a mini linux distrobution that you burn to a CD and boot up on it. Just google ezSBF by 1KDS. Hope this helped
Sent from my DROID2 GLOBAL using XDA App
Click to expand...
Click to collapse
I tried using all 3 of his CDs and none of them would boot my D2G past the bootloader. Also tried using rsdlite with 3 different SPF and nothing came of that either. Would continue to receive MEM_MAP blank error. I'm really out of ideas now.
There was an OTA recently by Verizon/Motorola released which breaks the ability to SBF to an older software release (they simply updated the boot loader and the new one does not accept older releases).
Unfortunately the cure of this would be a new SBF to be leaked with software release same or newer than the one from the past week OTA. Until then you're stuck with soft-bricked phones.
Check this thread out: http://forum.xda-developers.com/showthread.php?t=1531341
unbrick here http://rootzwiki.com/topic/23207-how-tounbricking-downgraded-629-root-normal-function-ota-629/
Sent from my DROID X2 using xda premium
Need some help here. I have the RAZR MAXX HD, and after updating to 4.1.2. I have been getting random reboots. I went to the Motorola forums and created a thread there about the reboots. One of their moderators suggested a few things, which I tried. None helped. I then tried their final suggestion, which was to do a factory reset. I tried this last night. Ever since I started, my phone has been stuck on the Android robot with the spinning symbol in his chest. Nothing seems to help. I have tried rebooting the phone doing the power and down buttons at the same time. This doesn't help. I have been able to do the power and up/down buttons at the same time, and have been able to get into the fastboot mode. I did try to get into the recovery mode, but that just takes me back to the robot screen. I booted up RSDLite, and tried flashing the most recent images I have. In the Status box, I keep getting a "Failed flashing process. Unknown fastboot command. (getvar). I have downloaded the files from this site here. http://sbf.droid-developers.org/vanquish/list.php Which is the correct file I should be flashing? Please help.
So no suggestions from anyone?
Sent from my SCH-I605 using xda app-developers app
evltwn72 said:
So no suggestions from anyone?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
This should solve the GETVAR-problem, everything you need is on this page
Try it, it helped me once i had to flash an sbf
esok44 said:
This should solve the GETVAR-problem, everything you need is on this page
Try it, it helped me once i had to flash an sbf
Click to expand...
Click to collapse
Thanks but I just shipped the phone off to Motorola. We'll see what happens. I'm sure they'll have it for 2 weeks b4 shipping it back. I'll save this for any future problems.
Sent from my SCH-I605 using xda app-developers app
OK, guys/gals,
I was stupid last night and changed my build.prop file to build.prop.bak, before I replaced the .bak file with my updated one my phone rebooted. Obviously now when I boot the phone it goes to a black screen and I can't do anything with it. I can get into stock recovery and tried a factory reset, but that didn't do anything except erase my data. I tried doing fastboot but every time I try to re-write my system partition it fails. I can do every other partition just not system. I tried reflashing the OTA kitkat with adb but again it can't fins the build.prop file.
So my question is am I screwed or is there a fix that I'm missing?
Thank for any help
BTW... this is for my RAZR HD maxx, not on the razr I am sending this from.
Sent from my DROID RAZR using XDA Free mobile app
88gt said:
OK, guys/gals,
I was stupid last night and changed my build.prop file to build.prop.bak, before I replaced the .bak file with my updated one my phone rebooted. Obviously now when I boot the phone it goes to a black screen and I can't do anything with it. I can get into stock recovery and tried a factory reset, but that didn't do anything except erase my data. I tried doing fastboot but every time I try to re-write my system partition it fails. I can do every other partition just not system. I tried reflashing the OTA kitkat with adb but again it can't fins the build.prop file.
So my question is am I screwed or is there a fix that I'm missing?
Thank for any help
BTW... this is for my RAZR HD maxx, not on the razr I am sending this from.
Sent from my DROID RAZR using XDA Free mobile app
Click to expand...
Click to collapse
Rsd with the keep data scrip from
from @SamuriHL
88gt said:
OK, guys/gals,
I was stupid last night and changed my build.prop file to build.prop.bak, before I replaced the .bak file with my updated one my phone rebooted. Obviously now when I boot the phone it goes to a black screen and I can't do anything with it. I can get into stock recovery and tried a factory reset, but that didn't do anything except erase my data. I tried doing fastboot but every time I try to re-write my system partition it fails. I can do every other partition just not system. I tried reflashing the OTA kitkat with adb but again it can't fins the build.prop file.
So my question is am I screwed or is there a fix that I'm missing?
Thank for any help
BTW... this is for my RAZR HD maxx, not on the razr I am sending this from.
Sent from my DROID RAZR using XDA Free mobile app
Click to expand...
Click to collapse
Since you already wiped data, you might as well just do a full FXD install with Kit Kat, if you weren't on it. You might be flashing the incorrect image and that could be causing the issue with system.
If you weren't on Kit Kat, you might as well just go full Kit Kat since you can root it and unlock the bootloader (if you aren't unlocked).
Other possible reasons why it's failing are as follows:
Bad USB cable - If you have the original cable, try it. Otherwise, swap out cables and try again.
Drivers are out-of-date. Update your drivers.
Are you using a USB 2.0 port? Don't be hooked up to USB 3.0.
Windows 8 has been known to cause issues, so if that's what you are on, you might want to try Windows 7 or earlier. If on Mac, I can't help you there as I'm not familiar with Mac.
I concur. Use my RSD Script Generator to generate scripts for the 183 KK FXZ, flash with KEEP DATA, root with towel root, unlock with motoapocalypse. Then you can downgrade back to JB (if desired) by generating scripts for 9.30.1 FXZ, and flashing the UNIVERSAL script. Done with unlocked.
I was on kitkat rooted. I did try the FULL.XML file from samurai, however red doesn't recognize my phone. I used fastboot through command prompt to flash everything except system partition. It won't let me flash, format it.
Thanks for the suggestions.
I am using windows 7 on usb 2 with 2 different factory razr hd cables, with samurai's info from another forum.
Josh
Sent from my DROID RAZR using XDA Free mobile app
System is a LARGE partition so it sounds like a cable/port/driver issue if it's failing to send it properly. I assume you're using motofastboot.exe?
SamuriHL said:
System is a LARGE partition so it sounds like a cable/port/driver issue if it's failing to send it properly. I assume you're using motofastboot.exe?
Click to expand...
Click to collapse
No. I am not. That's probably dummy move #2 I was using fastboot from the sdk... when I get home I'll try motofastboot.
Thanks
Josh
Sent from my DROID RAZR using XDA Free mobile app
Oh yea you have to use motofastboot else system will indeed fail. That should fix you up. Sweet.
Success!!
Thanks SamuriHl, I have been a follower of yours since the Bionic, and House of Bionic. I am not a noob by any means however, every so often I need a little reminding. Thanks for putting me in the right direction. The Phone is fully functional again.
Josh
You're very welcome. If it's not unlocked, do so now.
cdma_targa_9.8.2O-72_W-22_cfc.xml\cdma_targa_9.8.2O-72_VZW-22_cfc.xml failed using latest rsd light on a droid bionic
I would like to thank the developers and members at/on xda for all your help and resources. I revived my soft bricked bionic.
Phone Returned Failed
nibroc627 said:
cdma_targa_9.8.2O-72_VZW-22_cfc.xml\cdma_targa_9.8.2O-72_VZW-22_cfc.xml failed using latest rsd light on a droid bionic
Click to expand...
Click to collapse
Phone Returns fail on "5/24 oem fb_mode_set" I attempted removing the oem line as someone suggested to no avail. went back to original. It fails both ways. maybe someone can direct me to a JB file that works or explain whaat I am doing wrong.