Official Thread for the Funbook Infinity
We Have a ROM, That Too a CM10! Check it out here Credits for modifying the CM10 for A13 ROM for our device goes to Kgarg
Now i dont deny it takes a little bit more than a running brain to perform the steps without any casualties, but wherever you get stuck just ping us, we shall solve it.
Breath a totally awesome new life right now.
Post anything here.
Want to know the best apps for anything, ANYTHING. (Just please dont ask for the APKs)
Have a homescreen to show-off?
Things you are using it for...
...And anything you want to share with the whole wide world (Well, at least XDA)
Lets make this thread the almighty storage box for everything P275 cummunity,The Cummunity Infinite
This thread is also meant for those out there who our new to our lovely Tablet and don't know where to start.
Anything worth noting will be put in the second post (With due credits).
Lets Join Hands, lets come together.
Here is the Video That igyaan guy made while reviewing it
http://www.youtube.com/watch?v=nIXGFTmiECY
creagrox said:
Reserved
Click to expand...
Click to collapse
bought. can't root it, impossible i think.
As someone on Dexter said last night - nothing's impossible in technology.
We will find a solution, that's for sure.
The quadrant Scores Are out
Total:2331
CPU:1446
MEM:3929
I/O:3718
2D:990
3D:1570
Just a notch low than optimus2x.
Not Bad for 6.5k($120), is it?
U guys should first check if its already unrooted . Cause the funbook come pre unrooted.
If not u can try a software called unroot me. It worked for my Funbook alpha.
Shankermk said:
U guys should first check if its already unrooted . Cause the funbook come pre unrooted.
If not u can try a software called unroot me. It worked for my Funbook alpha.
Click to expand...
Click to collapse
do u mean 'UNLOCK ROOT' ? i can't find any software named 'unroot me'.
btw i've checked 'unlock root' , it didn't worked.
3G dongle
Can anybody tell me how to use 3G dongle with funbook infinity?
I have Idea Net setter (Huwai) with Idea card.
there is indeed no software named unrootme (troll alert, @shankermk?)
arun, anything worth sharing?
hey, a big welcome shivam. you will love the people around here.
congrats on buying your first tablet.
i've heard that huawei cards do work on this one(mine is d-link so no cake for me).
but somehow, if we gain root. then most of the things will work in it.(things like bluetooth, gamepads)
all is not lost people, keep your hopes,and smiles up.
hey, a big welcome shivam. you will love the people around here.
congrats on buying your first tablet.
i've heard that huawei cards do work on this one(mine is d-link so no cake for me).
but somehow, if we gain root. then most of the things will work in it.(things like bluetooth, gamepads)
all is not lost people, keep your hopes,and smiles up.
Hi ,
Can the developers please mention which all methods have been tried and resulted in failure or bricking of the device. This may help other people to avoid those chances. Also has any one tried installing sparkyroot.apk . infinity has the same config as xtab.
Rooting
Here is the description of different methods i tried on it.
unlockroot: recognizes the device, flashes its name. but after "trying to get shell root permissions", it just returns to normal.
superoneclick: freezes on step 4 "failed to set prot mask"
Sparkyroot: doesnt even starts its process "SU binary not installed"
maybe the long way (the one used to get root permissions on pre-froyo era) through ADB may work here after some modifications, of course, but have no experience using adb ))
did you guys try any other?
First i would like to say,i dont own this fun book tab...Im a proud owner of galaxy note...
Ok that being said,to gain root all you must need to do is push susperuser.apk to/system/app and its binary "su" to /system/bin to gain root...now you guys need to find a way to do this...if anybody knows to use adb you can try any exploit...sorry if you guys already know it
Sent from my GT-N7000 using xda app-developers app
I havn't tried any yet. Just bought the device yesterday evening and searching the net fo any hit.
Or if you device runs android 4(ICS) you can try to put a cwm zip containing the required files in your external sd,boot ibto recovery and select apply update from external sdcard and select the zip.It might work in a easy way....Because afaik ics allows to install zips from external sd which are test signed...
Note1:The zip must be named update.zip to work.create the zip then sign it and pls dont edit anything after signing as it may break the signature
Note2:if you dono to enter recovery you can try "adb reboot recovery" command in adb(without quotes)
Sent from my GT-N7000 using xda app-developers app
creagrox said:
hey, a big welcome shivam. you will love the people around here.
congrats on buying your first tablet.
i've heard that huawei cards do work on this one(mine is d-link so no cake for me).
but somehow, if we gain root. then most of the things will work in it.(things like bluetooth, gamepads)
all is not lost people, keep your hopes,and smiles up.
Click to expand...
Click to collapse
@ creagrox, thanks for welcome note,
If I can use 3G dongle, definitely, I am interested in rooting.
I think there is no bluetooth in this funbook.
vijai2011 said:
Or if you device runs android 4(ICS) you can try to put a cwm zip containing the required files in your external sd,boot ibto recovery and select apply update from external sdcard and select the zip.It might work in a easy way....Because afaik ics allows to install zips from external sd which are test signed...
Note1:The zip must be named update.zip to work.create the zip then sign it and pls dont edit anything after signing as it may break the signature
Note2:if you dono to enter recovery you can try "adb reboot recovery" command in adb(without quotes)
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
all is done except u can't navigate into recovery as there r no volume keys.
secondly when i enter the command 'adb boot recoverey', it just restarted and not in recovery mode. same happens with the command 'adb boot download'.
Sent from my Micromax P275 using xda app-developers app
arunrawat2112 said:
all is done except u can't navigate into recovery as there r no volume keys.
secondly when i enter the command 'adb boot recoverey', it just restarted and not in recovery mode. same happens with the command 'adb boot download'.
Sent from my Micromax P275 using xda app-developers app
Click to expand...
Click to collapse
I dono how this tabs recovery looks or how to enter recovery in this tab...but usually that command should take you to recovery...maybe their is something like s-off???but their is 90% chance that the above method will work once you are in recovery...
Sent from my GT-N7000 using xda app-developers app
Does anyone tried HD games in this tab, gangstar mv not working I tried that
Sent from my Micromax P275 using xda app-developers app
Related
I cannot flash roms or kernel. It won't boot recovery!!! I have stock rooted shift. How do I make a custom recovery? And install roms and kernel
Probably the easiest way is to download ROM manager from the market. The first option in the app is flash clockworkmod. Very fast and automagic. Have fun! Happy flashing.
I have that and kernel manager. Flashed it twice after it didn't work the first time. It hangs up on the HTC boot logo after I try to boot recovery
turn off your phone
power it on while holding vol down.
does the first line say S-OFF or S-ON?
S on I didn't do nand
I've tried a few more things. I used visionary to root my phone. Was that the wrong thing? It all works. But I can't flash. Lol
thronnos said:
I've tried a few more things. I used visionary to root my phone. Was that the wrong thing? It all works. But I can't flash. Lol
Click to expand...
Click to collapse
That's just a temp root. Go into the development section and use the GUI Root and recovery tool...worked for me.
Sent from my PG06100 using XDA App
Alright, is there a way to do this without a computer
thronnos said:
Alright, is there a way to do this without a computer
Click to expand...
Click to collapse
Yeah if you want you can use terminal emulator on your phone just open it up hit su get your super user permissions then start the commands the first time I rooted I did it using adb the second time I rooted I lost my adb and just chrome to phoned all the codes from my pc to root it from my phone
Sent from my PG06100 using Tapatalk
Alright!! Thank you all who have been helping. I have only a few more questions because I'm a little slow ^_^ ok, first. From the emulator I typed Su and gave permission.... now what? I looked for the commands in development and couldn't find. I'm trying to turn s off. I don't care so much about perm or temp root right now as long as I get that annoying s on to be s off. Lmao. I need commands please!!! Assume I have no access to a computer!
Check out the development subforum. It's a sticky thread by bcnice20.
i dont need a signature
Alright I have that, now its not explained there but in order to do that via the terminal do I need to dl the framework and sdk to my phone? I do not have a running computer right now. I had a crap amd system which is officially dead. It's now all spare parts. So doing the shell on a computer isn't going to work for me :/ yes, I'm difficult. Lol
thronnos said:
Alright I have that, now its not explained there but in order to do that via the terminal do I need to dl the framework and sdk to my phone? I do not have a running computer right now. I had a crap amd system which is officially dead. It's now all spare parts. So doing the shell on a computer isn't going to work for me :/ yes, I'm difficult. Lol
Click to expand...
Click to collapse
if you search that thread, there should be an answer.
thronnos said:
Alright I have that, now its not explained there but in order to do that via the terminal do I need to dl the framework and sdk to my phone? I do not have a running computer right now. I had a crap amd system which is officially dead. It's now all spare parts. So doing the shell on a computer isn't going to work for me :/ yes, I'm difficult. Lol
Click to expand...
Click to collapse
the commands given in that thread is the exact ones you would need, but since you're using a terminal emulator in your phone, you don't need adb.
do step 1
skip step 2
do step 3,4,5 via your terminal
do step 6
extra points:
once you're perma-rooted, you can go straight to installing Rom Manager, and flash clockworkrom that way.
then reboot your phone to recovery, and do a nandroid backup.
once that's done, you're all set.
Thank you dude!!!!!!! That rocks!!! I'm at work and I'm doing it right now. This is way more important than work ^_^ anyone else addicted to Android?
thronnos said:
Thank you dude!!!!!!! That rocks!!! I'm at work and I'm doing it right now. This is way more important than work ^_^ anyone else addicted to Android?
Click to expand...
Click to collapse
+1
When the perm root method was finally developed I was at work with no access to a PC. I ended up rooting via phone terminal just because I couldn't bear to wait a couple hours until I got home.
^ Shift Faced
Could someone explain step 1 and 3 for me if I'm using android terminal emulator. I tried it but nothing happened. My device is temprooted. I download the file into the download folder. I use root explorer to extract it... where?? I tried a couple places even the root folder (Its not in SD card) then once its good how do I check the md5 from the terminal. I type Su to get permission then what? The string in the post doesn't seem to do anything no matter how I type it. Or maybe I just don't know the command. I'm fairly new to this kinda thing. :/
That's awesome. I'm feeling the same way. I don't want to wait for a computer it might be a few weeks I'm impatient now lol
Wait, I got part of it. I just need to know how to save the file to the root of the SD card and then how to check the md5sum. Once I know that I'm good to go
Sent from my PG06100 using XDA App
thronnos said:
Wait, I got part of it. I just need to know how to save the file to the root of the SD card and then how to check the md5sum. Once I know that I'm good to go
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Download root explorer and long press the file in your download folder, then back out to your sd card directory and select move. You should be able to check mdsum5 in the term app using the commands given
Sent from my PG06100 using XDA Premium App
READ ME FIRST!! USE AT YOUR OWN RISK!! I and/or XDA are not responsible if this bricks your phone!!! If this transforms your phone into a decepticon and shoots your eye out...
OK....what a few months its been...sorry guys been out of commission...car wreck...
Had to start over...so here we go..
First...You must be rooted...if not google it..
install your favorite root file explorer
install your favorite term emulator
ok got that...now the good stuff..
download http://dl.dropbox.com/u/56403887/L45C_CWM_Recovery-v6.0.1.2.zip
or http://dl.dropbox.com/u/56403887/L45C_CWM_Recovery-v5.0.28.zip
this is the cwm recovery 6.0.1.2 compiled from source by me...it is only for the L45C...Cant stress that enough...had to make changes to graphics from source to get it to work...
also the v5.0.28 recovery because as of now v6.0.1.2 has no sdcard partioning support because it is new.
you can choose which you like best...
put on root of your sdcard ...
make sure the file name is recovery.img
now download http://dl.dropbox.com/u/56403887/flash_image.zip
this is the flash_image file to to flash the recovery..
unzip it should have the name flash_image
use root explorer to copy the file to /system/bin
open term emulator get su rights and cd to /system/bin and type chmod 0755 flash_image
now cd back to /
still with su rights type flash_image recovery /sdcard/recovery.img
if no output... wahoo.... if you get error start over
dont reboot yet...
go to playstore and download a app called Quick Boot its free and handy you want have to hold buttons to reboot into recovery..
ok...now the moment of truth run quick boot and choose recovery...you should get a su ask from superuser grant it....phone should reboot into cwm recovery...if it did... wahoo... you now have cwm
keymap is fixed and is like this.... search button to select.....return button to return..home button to scroll..
way better than before,,,to me any way...
still will get error about bad boot message but i will fix later it don't affect anything..
Here is the stock rom , rooted , busybox , http://dl.dropbox.com/u/56403887/Stock_L45C_Rom.zip
Here is the stock recovery also http://dl.dropbox.com/u/56403887/L45C_Stock_Recovery.zip
i am at present working on kernel...for cm7...
Give thanks to Koushik for CWM...And to TWO.BIT.CODER for all the help...Thank You...
Reserved
Hey ICE.....Is it suitable for Optimus Net P690 in India.....?????
Does this support custom themes?
p690f can't get qtadb to link phone/PC
Hi
I am stumped, as a complete novice to smart phone/linux.
At present my status is:
1. Phone is rooted, so I was able to get this done from my PC.
2. Now I have copied the recovery.img & flash.img to SD card.
3. I have Terminal emulator on phone &/or Sd card.
4. When in USB storage is activated & connected to PC, I can see all the files but on terminal emulator.
5. I have Qtabd on my PC but it will not 'see' my phone either in USB storage activated or not activated or in debug mode.
6. When debug mode activated, USB storage is deactivated. Seems both not able to be on.
7. In one of the XDA threads there was mention of 'demounting' the sd card so have also tried that in same combinations of SD/ debug.
I have been trying to sort this out on another forum but seems there is more info available on here.
I am having a huge problem tying to get Recovery working direct on the phone, mainly due to my inexperience on these devices, I am very happy to learn if pointed in right direction. Of course my concern also is not to brick the phone!!
Any assistance or links to suitable areas appreciated.
Whoops seems I posted on wrong thread, thought it was the similar one for P690, applogies.
WaHooo
I managed to finally get recovery activated using the terminal emulator on the SMALL screen of my phone!!
However I would still very much appreciate sorting out Qtadb connection as I am sure sometime in the future I will need to do some additions/deletions to my p690.
So, any info etc will be appreciated.
For any other Newbies who may see this,
1. To copy from a browser text long touch at start/end of text, then drag to high light.
2. To copy, touch highlighted area, you should get a message 'copied to clipboard'. To cancel, if you make a mistake like I made MANY touch some where else on screen.
3. With Terminal emulator started, (P690), after entering 'su' tap touch screen to bring up keyboard and select 'return/enter key'. This gives you Super User.
Long touch screen brings up menu withe 'paste',select.
4. To toggle back to browser, to same screen you were working on, hold down second key on bottom. This will bring up all the recent icons for what you were working on, select 'browser'. Continue copy line by line.
5. To toggle back to emulator, long press 2nd from left key & select emulator.
Hope this assists someone.
The p690 and this phone are not the same. This phone is from Net 10, idk about the p690, but this phone is. This one is also cdma. I think the p690 is gsm. They are NOT cross compatible. I'd brick my phone if I used a p690 rom.
sorry guys been working on code....
oldfella2... spark is right... this is for l45c on net10 or tracphone...only...the p690 is diff...there is a thread here on that phone...spark you can coustom theme. I haven't yet but I don't see why not...
I have been able to unlock bootloader and to fix cwm recovery for this phone..will post it here later this week...also been testing cm7....but I can't seem to find wifi bug... it drops and reconnects const...
lce67 said:
sorry guys been working on code....
oldfella2... spark is right... this is for l45c on net10 or tracphone...only...the p690 is diff...there is a thread here on that phone...spark you can coustom theme. I haven't yet but I don't see why not...
I have been able to unlock bootloader and to fix cwm recovery for this phone..will post it here later this week...also been testing cm7....but I can't seem to find wifi bug... it drops and reconnects const...
Click to expand...
Click to collapse
dude! if you can get cyanogen working i will be forever in your debt
Update please
Hi there. Been crack flashing my phone for a while and finally got my wife's phone rooted today.
Just wondering if anyone has had any luck flashing a custom recovery yet (eg CWM or Amon Ra)? If so, please post a guide. As I have been unable to find anything using my Google-fu.
Also, all your links were removed. So other than hinting at a solution. This thread is zero help.
Thanks in Advance!
My Phone: HTC Evo 4G (flashed to Cricket)
Wife's Phone: LG Optimus (LGL45C)
I have a question regarding etc..... Does your rom include a tun.ko file and if not do you know of anyone or anyway to run openvpn/droidvpn or just changeing kernels would be nice...
I can't root.
I have an L45C with 2.3.4 on it and it just won't root. I have tried: Gingerbreak, z4root, and unlock root, none of them worked. I tried gingerbreak a few times at day, and all night as I slept, but my phone just isn't rooting!
If any of you have gotten root please do tell me how.
no updates yet?
Can someone please post a link to this ROM? I had it but can't find ir and I need it bad, phone is semi-bricked and I have a corrupt backup. PLEASE!!
Regards,
rast4man
request fulfilled
Request fulfilled
lce67 said:
READ ME FIRST!! USE AT YOUR OWN RISK!! I and/or XDA are not responsible if this bricks your phone!!! If this transforms your phone into a decepticon and shoots your eye out...
OK....what a few months its been...sorry guys been out of commission...car wreck...
Had to start over...so here we go..
First...You must be rooted...if not google it..
install your favorite root file explorer
install your favorite term emulator
ok got that...now the good stuff..
download http://dl.dropbox.com/u/56403887/L45C_CWM_Recovery-v6.0.1.2.zip
or http://dl.dropbox.com/u/56403887/L45C_CWM_Recovery-v5.0.28.zip
this is the cwm recovery 6.0.1.2 compiled from source by me...it is only for the L45C...Cant stress that enough...had to make changes to graphics from source to get it to work...
also the v5.0.28 recovery because as of now v6.0.1.2 has no sdcard partioning support because it is new.
you can choose which you like best...
put on root of your sdcard ...
make sure the file name is recovery.img
now download http://dl.dropbox.com/u/56403887/flash_image.zip
this is the flash_image file to to flash the recovery..
unzip it should have the name flash_image
use root explorer to copy the file to /system/bin
open term emulator get su rights and cd to /system/bin and type chmod 0755 flash_image
now cd back to /
still with su rights type flash_image recovery /sdcard/recovery.img
if no output... wahoo.... if you get error start over
dont reboot yet...
go to playstore and download a app called Quick Boot its free and handy you want have to hold buttons to reboot into recovery..
ok...now the moment of truth run quick boot and choose recovery...you should get a su ask from superuser grant it....phone should reboot into cwm recovery...if it did... wahoo... you now have cwm
keymap is fixed and is like this.... search button to select.....return button to return..home button to scroll..
way better than before,,,to me any way...
still will get error about bad boot message but i will fix later it don't affect anything..
Here is the stock rom , rooted , busybox , http://dl.dropbox.com/u/56403887/Stock_L45C_Rom.zip
Here is the stock recovery also http://dl.dropbox.com/u/56403887/L45C_Stock_Recovery.zip
i am at present working on kernel...for cm7...
Give thanks to Koushik for CWM...And to TWO.BIT.CODER for all the help...Thank You...
Click to expand...
Click to collapse
DUDE! Thanks a TON! Now I can get my phone working again! Sorry to hear about your wreck and I wish you a speedy recovery! Thanks again!
Regards,
rast4man
ROM/Recovery LGL45C
What are the results of flashing this recovery? Was it successful to flash as I have a backup for the phone that I have made thankfully.
results are great. For what little ROM development, this is the best we have. Its just a ClockworkMod recovery image and then a rooted ROM. I'm still using it to this day and with all the apps and tweaks I've added, this phone rocks!!
My only complaint is I'm running out of internal space so I need to figure something out with that. Maybe I will try to re-partition my card to ext4 and try to increase internal memory by like 100mb. Apps2SD only goes so far sadly. I'm also going to try to put Team Win recovery on after I make sufficient backups. Let me know if I can help.
Regards,
rast4man
rast4man said:
results are great. For what little ROM development, this is the best we have. Its just a ClockworkMod recovery image and then a rooted ROM. I'm still using it to this day and with all the apps and tweaks I've added, this phone rocks!!
My only complaint is I'm running out of internal space so I need to figure something out with that. Maybe I will try to re-partition my card to ext4 and try to increase internal memory by like 100mb. Apps2SD only goes so far sadly. I'm also going to try to put Team Win recovery on after I make sufficient backups. Let me know if I can help.
Regards,
rast4man
Click to expand...
Click to collapse
I was able to install the CWM Recovery to the phone just fine. Realized what I was doing incorrectly. Now to test the only ROM's that I know of that are available for the Q from Area51. Are there anymore ROM's being developed. The L45C is not a bad phone, just needs more lightweight ROM's to work with it.
This guide assumes that you are on a stock Pantech Flex P8010 running either ICS (v4.0.4). or the updated JB (v4.1.2) Please note that rooting a ICS phone has been known to cause issues when trying to run the over the air update. If you have already rooted and are looking for a way to update to JellyBean please skip to the section on updating, if this isn't you keep reading.
So at this point you have decided to continue. You shouldn't run into any issues if you follow the directions and you shouldn't mess your phone up even if root doesn't take. However, in the spirit of covering ones back side....
I am not responsible for anything that goes wrong.
Jelly Bean 4.1.2 or ICS 4.0.4
This method was found by LuneBear and has not been tested by myself so I cannot personally verify its effectiveness. I did check and it seems to work with both ICS and JB but your mileage may vary. You will need to download SRSroot and install it on a Windows machine.
SRS ROOT
SRS Homepage
Make sure that USB debugging is enabled on your phone. Connect your phone via USB and run the program. Select the button for all root methods. Then you will need to select the Legolas exploit. Once everything is done (may take some time) just reboot the phone and you should be good to go.
Ice Cream Sandwich 4.0.4 ONLY
Windows Option
This method has been tried on a number of Windows versions and some work some don't so your mileage may very. This method uses Bin4ry's Root method and was orgnially discovered by aaki_rocker and is WAY LESS COMPLICATED. However please note that some users have had issues using this method with Bin4ry's latest version of the root script. It is recommended that you download an older version if you run into any issues or the root doesn't take.
First lets get some drivers on your Windows box. To do this you will need to download the Pantech PC Suite and install it.
http://c724062.r62.cf2.rackcdn.com/PantechPCSuite_1.1.1.3437.exe
Next you will need to download and extract Bin4ry's root script.
http://ul.to/z7krermj
Once you have these two files you will need to plug your phone into the PC via USB and enable the USB type as Data Mode.
Next run the Bin4ry's script and follow the directions when in doubt about what to choose select the simplest option in all cases.
If everything goes well you will have a nicely rooted phone.
Linux Option
This is not a point and click root and is not for the faint of heart. This method of rooting is based off of Bin4ry's root for ICS/JB. Changes have been made to the srcipt to allow it to work with the Flex please follow the steps below and you will have root in just a few minutes. It will probably take you longer to download the files you need than to actually root the phone.
This method has been performed successfully using Ubuntu 12.10 64bit it may work with other versions of linux but it will not work with Windows due to the driver issues and the fact that I didn't alter the windows batch file, in fact I removed any windows related files from Bin4ry's original package.
First you will need to set up the linux machine if you don't already have it. This can be done in one of a few ways you can run a live copy using a Live CD/USB boot (this will not install linux on your computer unless you tell it to) or you can install it in the standard manner or using WUBI, the third option us setting up linux in a virtual machine. If you don't know how to do this google it, there is a wealth of information out there on these subjects and probably some you can even understand without a degree in astro-physics.
Second you will need to set your phone up so that USB debug mode is turned on [settings>developer options]. Make sure you phone isnt plugged into the USB or it won't let you change the setting.
Now plug your phone into to the (linux) computer with the USB. Next you will need to set the USB computer connection type to Media Device(MTP)
In order for the computer to communicate with the phone we will need to install Android Debug Bridge (ADB) and create a couple of files.
These files will basically trick the computer into thinking it has actual drivers for the phone.
Open a terminal window, and enter the following (this will install ADB):
sudo apt-get install android-tools-adb
Once this is done enter the following
sudo gedit /etc/udev/rules.d/70-android.rules
Gedit will open at this point copy the the following into it and then click save and close the window.
SUBSYSTEMS=="usb", ATTRS{idVendor}=="10a9:6055", MODE="0666"
In the terminal window enter this (yeah I know it looks the same just go with it)
sudo gedit /lib/udev/rules.d/70-android.rules
After the window opens paste the same line of code into the file that you did in the previous files, save and close.
Test your connection by issuing the following command in the terminal window:
adb devices
Should see something similar to:
OSCAR01111112010204 device
Your adb is now recognizing your phone and you can now move on to the next step if you are not getting this don't even bother moving to the next step it wont work. If you don't see this check your settings and go again.
Ok so you are now ready to actually root the phone. The first thing your going to need to do is download my modified Bin4ry script. See the attached file.
After you have it downloaded you will need to extract it you can do this by opening the file manager (click on the home folder icon) and going to download. Find the file called Root_Flex.zip. Right click on it and select EXTRACT HERE. After its done extracting you should see a directory called Root_Flex. In a terminal windows enter the following:
cd Downloads/Root_Flex
Your prompt should now look something like
[email protected]_name~/Downloads/Root_Flex$
From here just enter the command:
bash RunMeFlex.sh
At this point you should see a bunch of junk come up and a menu asking which way you want to try to root. Type 1 and press enter. It will give you 3 errors, ignore them. It should copy a bunch of files and ask you to press restore on your phone, do it. It should ask you to press Enter to reboot the phone, do so and the phone will reboot. It should be waiting on you to press enter again dont press enter until the phone is completely rebooted and for good measure give it an extra few seconds. The script should finish and the phone will reboot again this time you should see a little box with an update appear on the phone. At this point you should be rooted. If not try the script again.
I hope this helps out a lot of folks out there. Let me know if I need to change anything in this How to or if I made any mistakes along the way.
Updating If you're already rooted
So you rooted your phone and now you want JellyBean but when you run the update you get the dead droid image and the update fails OR you live in an area that isn't covered by AT&T and you want the update, what do you do? Well thanks to some hard work by Attn1 we have a solution and its pretty simple. First off you will need to have CWM running on the phone. Now there are a few ways to go about this but the method I used was here:
http://forum.xda-developers.com/showthread.php?t=2133857
You only need to go as far as getting CWM up an running on the phone you do not need to install it as the the update by Attn1 will take care of a full install of a better version. You will need to have a copy of Fastboot.exe and some img files. Below is a rar file that has all the necessary files to get CWM running (not installed) on the phone using windows (sorry I don't have the linux files for this one). Just unpack them into a convienent folder somewhere and follow the instructions on the link above.
http://tinyurl.com/oa2p48f
I recommend using the boot_external.img but if you do not have an external SD card and only have the internal storage just use boot_internal.img instead. This method relys on you being able to get into fast boot. If you do not have access to fastboot for what ever reason I suggest you jump ahead in the thread and read Attn1 methods for installing CWM:
http://forum.xda-developers.com/showthread.php?t=2008888&page=44
Next get the update files from this link (second post)
http://forum.xda-developers.com/showthread.php?t=2008888&page=47
Once you have all the files downloaded and copied everything to the appropriate SD cards on your phone your ready to go. If you don't know how to do this don't even think about anything else till you learn this. After this is all done follow the directions below (copied from Attn1's post)
Procedure if you ARE NOT running baseband JYUS06032013 (ICS Basebands) :
boot ICS CWM
flash FLEX-JB-JYUS06032013-FIRMWARE.zip from CWM
format system in CWM (will NOT wipe data, but makes sure old rom does not flash back stock recovery)
restart start recovery/adb reboot recovery (JB CWM is installed - do not try to fastboot boot ICS CWM)
flash FLEX-JB-JYUS06032013-ROM.zip from CWM.
reboot
Procedure if you ARE running baseband JYUS06032013 (JB Baseband) :
get root (Instructions HERE - use GANDALF)
install CWM (Instructions HERE)
flash FLEX-JB-JYUS06032013-FIRMWARE.zip from CWM
format system in CWM (will NOT wipe data, but makes sure old rom does not flash back stock recovery)
reboot to CWM
flash FLEX-JB-JYUS06032013-ROM.zip from CWM.
reboot
This ROM is Pantech stock with no mods other than CWM installation protection and all stock permissions and symlinks carefully maintained and consistent with the product of a successful OTA.
The firmware is also stock, with the exception of the open aboot allowing fastboot boot <bootimage>, and installation of JB CWM with nothing else added or changed. It runs well with nothing broken. You MUST be on JB firmware (below) to run it properly.
You can let the new CWM root it if you like when you exit - it will prompt you. It will also prompt you to disable CWM on reboot make sure this gets disabled or the phone will keep booting to CWM rather than the ROM.
Downloads:
md5: 1a0ca5f177bce2f4c428931616e0ecd1 FLEX-JB-JYUS06032013-FIRMWARE.zip
md5: 17c0e611ab6dfbca230571c1e40f3d14 FLEX-JB-JYUS06032013-ROM.zip
Make sure you check the md5sum on the files before you flash them if there wrong download them again this is vital.
If you need a program to check md5sums copy this .exe file to your c:\windows\system\ and run it from the command line.
http://tinyurl.com/l74wl9q
Thanks go to Bin4ry for the original script and all the technical help provided.
Check out the thread and give a thanks and donate a few bucks if you can.
http://forum.xda-developers.com/showthread.php?t=1886460
Thanks to Atadres for getting me going in the right direction and help testing along the way.
Thanks to Esau Silva for this post that helped get the drivers working for us in Ubutnu.
http://esausilva.com/2010/05/13/setting-up-adbusb-drivers-for-android-devices-in-linux-ubuntu/
Thanks to Aaki_rocker for coming up with the Windows version of this root method you can find his original post here.
http://forum.xda-developers.com/showthread.php?t=2141538
Thanks to LuneBear for finding the root method for JellyBean.
Thanks to Attn1 for the JellyBean update and CM 10.2 version of CWM Recovery.
jist a quick memo guys when you issue the command adb devices please cd to proper android sdk platform tools folder or else youll get an error like no command did you mean..... heres the proper way do this step before you do the adb devices step type in cd ~/android-sdk-linux/platform-tools press enter then type in ./adb devices
i am now trying to contact team win for help with porting the recovery image team win recovery so we can start roming this device and adding ports and roms
atadres said:
jist a quick memo guys when you issue the command adb devices please cd to proper android sdk platform tools folder or else youll get an error like no command did you mean..... heres the proper way do this step before you do the adb devices step type in cd ~/android-sdk-linux/platform-tools press enter then type in ./adb devices....
Click to expand...
Click to collapse
Acutally this assumes you are on a completely fresh install and did not have adb installed through the platform tools if that is the case everything I typed up will work. However you are correct too. Let me know if you think I should go ahead and rework the stuff to be a little more universal if so please PM me an update of the commands.
your right my apologies but one thing i noticed that i would like to say idk if its my experiance or universal after successfully rooting the flex the lockscreen fails to resize itself leaving a black space where the onscreen dock is usualy located no big issue though and the rooting was easy and painless once adb was set up correctly 100000+ points thanks so much
Good job guys. Respect! I have a Pantech Flex, which is an awesome device with the same specs (things that matter to me) as S3, but without big name. I like Pantech Flex because it's size is much better for me than.
The only thing now is to create a ROM! Is it difficult to make a pure Android ROM? Nothing additional, just a pure Android like in Nexus?
Again, thank you guys for your dedication! I'll definitely donate as soon as I have Jelly Bean loaded on my Pantech Flex!
Thanks, this worked great. I am gonna start on a ROM. Hope I don't get bricked.
Sent from the new Pantech Flex. Nominated best lowest priced new smartphone. U jelly I paid nothing, for a phone almost as good as the Galaxy S3?
HighCommander540 said:
Thanks, this worked great. I am gonna start on a ROM. Hope I don't get bricked.
Sent from the new Pantech Flex. Nominated best lowest priced new smartphone. U jelly I paid nothing, for a phone almost as good as the Galaxy S3?
Click to expand...
Click to collapse
lets not get ahead of ourselves here guys in order to create a rom we would need to get a custom recovery on our phone this can be achived by mapping out the devices bootloader extracting an img file of it and using koushes clockworks mod recovery creator only when we achive a port of a custom recovery can we make roms and be able to flash them if any of you have knowledge of this as i am a noob when it comes to recoveries pleasae feel free to input we need all the help we can get guys
---------- Post added at 02:03 PM ---------- Previous post was at 01:58 PM ----------
ivansana said:
Good job guys. Respect! I have a Pantech Flex, which is an awesome device with the same specs (things that matter to me) as S3, but without big name. I like Pantech Flex because it's size is much better for me than.
The only thing now is to create a ROM! Is it difficult to make a pure Android ROM? Nothing additional, just a pure Android like in Nexus?
Again, thank you guys for your dedication! I'll definitely donate as soon as I have Jelly Bean loaded on my Pantech Flex!
Click to expand...
Click to collapse
lol right now we need knowledge donations unfourtunatly we cannot start working on roms till we have a custom recovery ported over either team win or clockworks mod recovery this will take a little bit of time and knowledge and to answer your question about the stock nexus rom your talking along the terms of a cynaogen mod port? or akop port looking into it i would say untill we have mapped the bootloader we wouldnt know how diffcult it would be because the simlinks maybe difcult for a phone that has not yet caught fire in the dev world
i wish i had the time to do a recovery myself and get cwm working but with my family and my fulltime job i barely get any time. Im going to spend all my time on this amazing little phone to do what i can. props to the root method it worked flawlessly!!!
Sent from my PantechP8010 using Tapatalk 2
Awesome I'm glad im getting some good feed back on the root. I wasnt sure if I did the rightup correctly and im glad its working out for everyone.
If I get some time I will start looking into a custom CWM and all that junk I have a contact that should be a pretty good help in this just have to find the time to do it.
Yeah after coming from the LG Nitro HD I was surprised at how easy this was to root.
If you want to get together on gtalk we can work on this together. Right now I'm in the process of getting a ROM dump so we can recover our phones from stock images if we happen to mess them up, which I'm sure we will, but that's the best part! Lol.
I can smell CM9 and CM10 calling to this phone!!!
Sent from my PantechP8010 using Tapatalk 2
jSterling said:
Yeah after coming from the LG Nitro HD I was surprised at how easy this was to root.
If you want to get together on gtalk we can work on this together. Right now I'm in the process of getting a ROM dump so we can recover our phones from stock images if we happen to mess them up, which I'm sure we will, but that's the best part! Lol.
I can smell CM9 and CM10 calling to this phone!!!
Sent from my PantechP8010 using Tapatalk 2
Click to expand...
Click to collapse
Yeah I love this phone but I have to say the Pantech launcher kinda pisses me off.
donavan01 said:
Yeah I love this phone but I have to say the Pantech launcher kinda pisses me off.
Click to expand...
Click to collapse
Agreed lol im using nova
I actually don't mind the launcher, its pretty nice compared to other brand launchers. I'm probably going to try launcher pro though that's been my favorite sense I had my prepaid optimus V
Sent from my PantechP8010 using Tapatalk 2
jSterling said:
I actually don't mind the launcher, its pretty nice compared to other brand launchers. I'm probably going to try launcher pro though that's been my favorite sense I had my prepaid optimus V
Sent from my PantechP8010 using Tapatalk 2
Click to expand...
Click to collapse
I had launcher pro and hated it ... check out APEX seems like the stock ICS but with a lot of extras and without the annoying bits of the pantech that make me insane
donavan01 said:
I had launcher pro and hated it ... check out APEX seems like the stock ICS but with a lot of extras and without the annoying bits of the pantech that make me insane
Click to expand...
Click to collapse
hey guys... is there a pantech flex forum????????
also is it possible to unlock the device if you forget the log in pattern????? thanks
I don't know anything about mapping the device. So I am just going to work on a ROM for my infuse.
I will help with anything for testing. A stock image would be awesome. =-)
No flex forum yet.
_______
Sent from the new rooted Pantech Flex. Nominated best lowest priced new smartphone. U jelly I paid nothing, for a phone almost as good as the Galaxy S3?
jSterling said:
I actually don't mind the launcher, its pretty nice compared to other brand launchers. I'm probably going to try launcher pro though that's been my favorite sense I had my prepaid optimus V
Sent from my PantechP8010 using Tapatalk 2
Click to expand...
Click to collapse
sense is my fav launcher and no no forum yet ive requested and gotten no reply smh
did this thread die guys?
atadres said:
did this thread die guys?
Click to expand...
Click to collapse
Wait till after Xmas I bet you a lot of people will get this phone as presents.
donavan01 said:
Wait till after Xmas I bet you a lot of people will get this phone as presents.
Click to expand...
Click to collapse
Yeah I can see that happening. This weekend I am going to work on it to see what I can come up with. I've been so swamped with work and life bs that I haven't had a chance.
No this thread didn't die.
Sent from my PantechP8010 using Tapatalk 2
Hi guys,
So I didn't see any thread for Win or win duos also know as Grand Quattro.
So here is an off-topic thread for anyone with or without the device to vocalise their views and ask about it like in one place.
Ofcourse if any dev's out their working on this device please post.
Happy Posting.
Please give clockwordmod recovery for samsung quattro i8552
What a surprise nobody still try to make cwmr for i8552.
Please make and test it and post it
Thanks
guys can anyone try and see if this flashable zip roots your device.
superuser.
an alternative is the zip attached
these shouldn't increase the binary counter but you never know(if binary counter is more than 0 your warranty is void).
so consider yourself warned.
enter recovery mode I think its vol down + home + power key.
then choose install zip via external sd card
done you should be rooted but since i dont possess this device I dont know.
I used framaroot. works perfectly. ..use it people. Anyone know of 4.2 upgrade? ?
the details about my device is attached please see and let me know how to root because I'm unable to access the sdcard in the android recovery that's why please upload a flashable zip which I can flash using Odin
@Dark Passenger its not working its saying "signature verification failure "
"Installation aborted "
i did it using adb sideload but no use
i tried both "superuser.zip" and "root.zip"
and if i try to install using sdcard it says
"unknown volume "sdcard" " :'(
please help me out
arihantbaid said:
@Dark Passenger its not working its saying "signature verification failure "
"Installation aborted "
i did it using adb sideload but no use
i tried both "superuser.zip" and "root.zip"
and if i try to install using sdcard it says
"unknown volume "sdcard" " :'(
please help me out
Click to expand...
Click to collapse
did you have an external sd card...?
and you mean to say the only option rregarding sdcard was install via sdcard no install via external sdcard.
because sometimes there are problems with using adb sideloading.
still try this via sdcard install only.
if this doesnt work might have to see with a device only.
SuperSU
sorry its an emergency and i need 10 posts to reply to a development related forum
sorry its an emergency and i need 10 posts to reply to a development related forum
Hi guys i would like to know whats the max downloading speed you are getting in 2g ?
Sent from my GT-I8552 using xda app-developers app
Problem....huge problem
I am not able to move apps to sd card.....is there a way to move apps to sd card .........pls pls help
abhiek bist said:
I am not able to move apps to sd card.....is there a way to move apps to sd card .........pls pls help
Click to expand...
Click to collapse
No u cant do it without rooting. I wonder why would u like to do so. You got approx 5 gb usable internal to install as much as apps you want
Sent from my GT-I8552 using xda app-developers app
heavy games dude..
rahulsnair said:
No u cant do it without rooting. I wonder why would u like to do so. You got approx 5 gb usable internal to install as much as apps you want
Sent from my GT-I8552 using xda app-developers app
Click to expand...
Click to collapse
there are almost 15 games i wanna download and each of them are of 1 gb ......what if i install a heavy game like real racing 3 then zip its data and put that data to external sdcard and when i would like to play that game i will extract that zip and put it back .....will it work...with it i can download all my games and play them when needed
abhiek bist said:
there are almost 15 games i wanna download and each of them are of 1 gb ......what if i install a heavy game like real racing 3 then zip its data and put that data to external sdcard and when i would like to play that game i will extract that zip and put it back .....will it work...with it i can download all my games and play them when needed
Click to expand...
Click to collapse
Yes defenitley it ll work. Dont uninstall the game. If u do so. U ll loss all the progress. Move the game cache alone. :thumbup:
Sent from my GT-I8552 using xda app-developers app
Too new
Its sad that this device is freakin new. i just bought it yesterday and i hope this device gets popular else we mite not even get a proper rooting for a year. those who can develop custom roms plis try . me am working and i cannot put time to it.. nway i love dis fone n it makes da xperia's stupid long displays ****.
http://forum.xda-developers.com/showthread.php?t=2326080
check this out....
hey you guys might wanna check this out.
http://forum.xda-developers.com/showpost.php?p=43250458&postcount=2
hello guys...
i want to ask if the device has a notification led and if its possible to turn on the screen by pressing the home button!
it is very annoying any time that u want to check your phone about missing calls or sms ,to turn on the device!
and the applications like "noled" they are consuming a lot of battery!
thank you very much about your help!!
jimmykar said:
hello guys...
i want to ask if the device has a notification led and if its possible to turn on the screen by pressing the home button!
it is very annoying any time that u want to check your phone about missing calls or sms ,to turn on the device!
and the applications like "noled" they are consuming a lot of battery!
thank you very much about your help!!
Click to expand...
Click to collapse
No .. this device does not have notification led
Sent from my GT-I8552 using xda app-developers app
same
arihantbaid said:
@Dark Passenger its not working its saying "signature verification failure "
"Installation aborted "
i did it using adb sideload but no use
i tried both "superuser.zip" and "root.zip"
and if i try to install using sdcard it says
"unknown volume "sdcard" " :'(
please help me out
Click to expand...
Click to collapse
same problem wid me
ROM - i8552
I have just bought this phone. while buying I though that this phone will have almost all the features of Grand but to my surprise, multi-window option is not there. Build number of my phone is XXAMG1 & BASEBAND version DDAMG1. Can I farmaroot my phone and also, pls guide how to activate multi-window in the Grand Quattro.
Thanks
AB
Note: So far there is no custom recovery for this device yet as soon as one is available i will update my post and write a guide for you to follow to install. If you have any question feel free to Private message me or email me at [email protected]. With this being said lets start the guide on rooting the New boost max.
Step 1. We want to make sure that you turn on USB Debug on your phone under development settings in settings tab.
Step 2. Plug in your device nd select install ZTE drivers on your phone.
Step 3. If your pc doesnt recognize the phone click here for zte driver
support.zte.com.cn/support/%28S%28ct55nzeou0okp055palpbk45%29%29/news/NewsDetail.aspx?newsId=1000442
(if it doesnt allow you to click on it then copy and paste it on your browser)
Step 4. Once you have all drivers install and you pc recognizes your phone go on your browser and download an app call kingo. The app can be found here
kingoapp.com
Step 5. Once you download and install kingo app open u kingo and give it a sec to recognize the phone. Once it does select root and let the pc do its thing. Once the phone is rooted it will restart and ask you for superuser permissions, at this point select grant and your phone will be rooted. Open Superuser pp and install binaries onto the phone once you do that i suggest you go onto the play store and update the superuser app.
This is it now your new zte boost max is rooted and we are just waiting on a custom recovery to arise or i will work on one and upload it here on this post for you. I do have a spare zte max phone i can work on to try everything i can on it so dont worry hopefully real soon i will have it. Now i worked mostly on Samsung phones Unlocking and flashing repairing imeis so building custom recovery is quite new for me but i promise to work hard. Thanks And enjoy And sorry for some reason the xda is not letting me post url links since im a new member so until i become n old member i cant write www in front of any links. I know its stupid lol
thanks so much bro its good to see someones working on this
Hey there..thanks for this post. I actually went on the new devices forum and requested that they add the device. It's been a good phone and responds well.
Sent from my N9520 using XDA Premium HD app
Progress?
damaso1986 said:
Note: So far there is no custom recovery for this device yet as soon as one is available i will update my post and write a guide for you to follow to install. If you have any question feel free to Private message me or email me at [email protected].
Click to expand...
Click to collapse
Have you been able to make any progress on the custom recovery or roms?
zte max
can somone help me i rooted the zte max but still cant find an app for hotspot / internet sharing
Having the same problem, have installed over 20 apps and none seem to work.
Sent from my N9520 using xda app-developers app
Max
nice it work for my zte max thanks alot , was very easy
guzman953 said:
nice it work for my zte max thanks alot , was very easy
Click to expand...
Click to collapse
what was the original settings cause i cant get my wifi to work at home
---------- Post added at 10:02 PM ---------- Previous post was at 09:57 PM ----------
does anyone have the setting before the wifi tether change
Custom Recovery By Philz
Well I didn't get to create the custom recovery however thanks to a friend I was able to flash a recovery that did work on the device. I am uploading the recovery there is a set of instructin tat is required to flash it but I found a better faster way that you can even do it without a pc really. So first you are going to want to download the recovery I uploaded. Once you have it downloaded you are going to extract the file to the root of your sd card or your phone (I think I had it on both just incase it didn't work on one) then after you have it on your phone you are going to take off your computer and open up play store and search for an app called FLASHIFY and install it on your phone. When you open flashify its going to ask you to grant permission grant it. Then agree with disclaimer. Okay once in the main app you will see boot image and recovery image and zip file. You are going to click on recovery image a pop up will ask choose a file download twrp download cwm cancel you are going to click on choose file. Scroll down til you see sdcard click on that. Now when you scroll down you should see the recovery img you copied in there you will know its the image because right next to it there will be a circle with the lighting on it. you are going to click on that. Its going to ask you if you want to flash that file you are going to select yup! and once it done it will ask you if you want to reboot or continue select reboot now it will reboot into your new recovery. Thanks a lot George for finding the recovery for me. Im still going to work on a twrp I think its more stable and I never use philz recovery but its really nice.
ps Well for some reason the file is not uploading so im am going to see if I can copy the link on here it migt not let me let see
androidforums.com/iconic-phablet-all-things-root/832497-recovery-philz-touch-6-19-2-need-testers.html
boost max will tether 3g but not 4g
I have the phone rooted with no problems, but i have installed wi fi for rooted phones and barnacle and when use either one of those tether programs, they only tether in 3g but will not tether in 4g. i have verified that 4g does work directly from the phone when i run the speed test but when i run the same speed test from my tether device, it only test in 3g. any suggestions?
Follow the tutorial that is a few posts back in this tired.
Sent from my N9520 using xda app-developers app
---------- Post added at 03:05 PM ---------- Previous post was at 02:18 PM ----------
damaso1986 said:
Well I didn't get to create the custom recovery however thanks to a friend I was able to flash a recovery that did work on the device. I am uploading the recovery there is a set of instructin tat is required to flash it but I found a better faster way that you can even do it without a pc really. So first you are going to want to download the recovery I uploaded. Once you have it downloaded you are going to extract the file to the root of your sd card or your phone (I think I had it on both just incase it didn't work on one) then after you have it on your phone you are going to take off your computer and open up play store and search for an app called FLASHIFY and install it on your phone. When you open flashify its going to ask you to grant permission grant it. Then agree with disclaimer. Okay once in the main app you will see boot image and recovery image and zip file. You are going to click on recovery image a pop up will ask choose a file download twrp download cwm cancel you are going to click on choose file. Scroll down til you see sdcard click on that. Now when you scroll down you should see the recovery img you copied in there you will know its the image because right next to it there will be a circle with the lighting on it. you are going to click on that. Its going to ask you if you want to flash that file you are going to select yup! and once it done it will ask you if you want to reboot or continue select reboot now it will reboot into your new recovery. Thanks a lot George for finding the recovery for me. Im still going to work on a twrp I think its more stable and I never use philz recovery but its really nice.
ps Well for some reason the file is not uploading so im am going to see if I can copy the link on here it migt not let me let see
androidforums.com/iconic-phablet-all-things-root/832497-recovery-philz-touch-6-19-2-need-testers.html
Click to expand...
Click to collapse
Worked perfectly!
This worked perfectly for me a few moments ago!
Rom
Now all we need are some custom roms! :fingers-crossed:
phone will only tether 3g but not 4g
I have the phone rooted with no problems, but i have installed wi fi for rooted phones and barnacle and when use either one of those tether programs, they only tether in 3g but will not tether in 4g. i have verified that 4g does work directly from the phone when i run the speed test but when i run the same speed test from my tether device, it only test in 3g. any suggestions?
Has anyone tried, Can this device work on T-mobile?
If I root my Max will lose Test Msgs.
I want to root my boost max but i want to know if I do will it erase all the text msgs I have
already saved. Thank you!
Please can anyone help in getting MSL for this phone? If possible at all.
need help kingo won't recognize my device installed drivers from phone it didnt work then tried the one from the site you pasted still didn't recognize my phone
Nope....
damaso1986 said:
Note: So far there is no custom recovery for this device yet as soon as one is available i will update my post and write a guide for you to follow to install. If you have any question feel free to Private message me or email me at [email protected]. With this being said lets start the guide on rooting the New boost max.
Step 1. We want to make sure that you turn on USB Debug on your phone under development settings in settings tab.
Step 2. Plug in your device nd select install ZTE drivers on your phone.
Step 3. If your pc doesnt recognize the phone click here for zte driver
support.zte.com.cn/support/%28S%28ct55nzeou0okp055palpbk45%29%29/news/NewsDetail.aspx?newsId=1000442
(if it doesnt allow you to click on it then copy and paste it on your browser)
Step 4. Once you have all drivers install and you pc recognizes your phone go on your browser and download an app call kingo. The app can be found here
kingoapp.com
Step 5. Once you download and install kingo app open u kingo and give it a sec to recognize the phone. Once it does select root and let the pc do its thing. Once the phone is rooted it will restart and ask you for superuser permissions, at this point select grant and your phone will be rooted. Open Superuser pp and install binaries onto the phone once you do that i suggest you go onto the play store and update the superuser app.
This is it now your new zte boost max is rooted and we are just waiting on a custom recovery to arise or i will work on one and upload it here on this post for you. I do have a spare zte max phone i can work on to try everything i can on it so dont worry hopefully real soon i will have it. Now i worked mostly on Samsung phones Unlocking and flashing repairing imeis so building custom recovery is quite new for me but i promise to work hard. Thanks And enjoy And sorry for some reason the xda is not letting me post url links since im a new member so until i become n old member i cant write www in front of any links. I know its stupid lol
Click to expand...
Click to collapse
Hmmmm. I've tried to ROOt my ZTE MAX 4 times I've followed these steps precisely as instructed..
first 3 times I received error : ROOT Faile Conecctionunstabli, last time I received ROOT Failed Script Error...
I'm using a PC with Windows 7, New phone, pc auto read phone and downloaded drivers..so whts the problem???
guzman953 said:
can somone help me i rooted the zte max but still cant find an app for hotspot / internet sharing
Click to expand...
Click to collapse
Foxfi in the play store works pretty well for me across all my devices without hotspot or USB tethering....it also use Bluetooth to share your network like a VPN