Database Info

[Q] CM7 with gapps built in?

Hi all,
on my very first flash of CM7, I had to install gapps. All worked well and I was happy.
Since then, every time I flash CM7, I get gapps already installed (yes I wiped all, yes I cleared dalvik cache, I even did the lock/unlock thing in order to clear all data).
I somehow get the feeling that my flashes are not a "clean" install.
did anyone else experience this as well?
thanks...

On your first time on CM7, wipe everything, flash cm7, flash gapps. When you want to update cm7, jus wipe cache and dalvik, then flash the updated cm7. No need to reflash gapps, no need to do a full wipe either.... unless you want to.
-Nexus S

So you mean that from now on. Gapps will always be installed? Even after full wipe/ factory settings?
Sent from my Nexus S using XDA Premium App

asafru said:
So you mean that from now on. Gapps will always be installed? Even after full wipe/ factory settings?
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
That's not what he meant. He meant that if you are upgrading CM7, you do not need a full wipe at all.
But after a full wipe your Gapsps should be gone. It's weird that it is still there after a wipe. :S

It's still there after a wipe... is there a way to make sure I full wipe correctly?
Sent from my Nexus S using XDA Premium App

asafru said:
It's still there after a wipe... is there a way to make sure I full wipe correctly?
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
Wipe Factory/Dalvik/Cache: Full Wipe
Wipe Factory: Removes Apps + Settings
Wipe Dalvik/Cache: Wipes the cache but your apps + settings remain.
Wiping factory will delete your Gapps.
Proper way to flash CM7:
1. Wipe Factory/Dalvik/Cache
2. Flash CM7
3. Flash Gapps
4. Flash Kernel (Optional)
5. Reboot
Proper way to upgrade
1. Wipe Dalvik/Cache (Optional)
2. Flash Kernel (Optional)
3. Flash CM7
3. Reboot

asafru said:
So you mean that from now on. Gapps will always be installed? Even after full wipe/ factory settings?
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
Upgrading to newer versions will now keep all your data in tact, so gapps will be there etc.

great, I think it's all sorted out now.
just one question though, I've read that CWM dalvic cache wipe doesn't work. Is that true?
If so, what is the best way to wipe dalvic cache and do factory reset (fastboot/adb commands are also welcome..)

asafru said:
great, I think it's all sorted out now.
just one question though, I've read that CWM dalvic cache wipe doesn't work. Is that true?
If so, what is the best way to wipe dalvic cache and do factory reset (fastboot/adb commands are also welcome..)
Click to expand...
Click to collapse
It works. Somebody confirmed this, the error that pops up during CWR is SD EXT.
You can check for yourself, run a logcat (search the forum) while the phones booting.

[Q] What to wipe when installing new kernel at Nexus S with CM7?

Hi!
At my Nexus S I do use CM7 nightly #144 atm. Now I would like to try CM7 with Netarchy's kernel 1.3.7 (Netarchy Nexus - 1.3.7-cfs-2.3.4-universal (Universal for non-stock 2.3.4 roms)).
I backed up everything using ClockworkMod 3.0.2.4 as well Titanium Backup Pro.
When downloading the 1.3.7 kernel I place it in root at sd card and now I have some questions:
Which kind of wipes do have to do (or should I do)? And when? Before updating or after updating?
wipe data/factory reset? (I guess no?)
wipe cache?
wipe dalvik cache?
Do I have to use "fix permissions" after the update?
Thanks in advance =)

For flashing a new kernal
Boot into recovery...
Wipe cache...
Wipe dalvik cache...
Flash kernal...
Reboot...
As always make a nand backup just in case...
Sent from my PC36100 using Tapatalk

if the kernel is compatible with the rom, i dont think you have to wipe anything

When flashing a new kernel wipe the cache and dalvik cache. Neaither one of these will erase any of your data so it is always best to be on the safe side when flashing and erase both of these for good measure.
Sent from my xoom on tiamat manta ray rom at 1.7 ghz

Thanks a lot!

Btw, does a full wipe/factory reset wipes also dalvik?
Sent from my Nexus S using Tapatalk

Testing!
Sry, wrong thread!

thanks.......

Wipe wipe wipe

Just want to make sure what it means of a full wipe. Does it mean wiping data,cache and dalvik ? And does this erase the applications ? Specially if your updating from a older rom ver. To a new one. Sorry for my noobness and thanks for the info in advance.
Sent from my LG-P999 using XDA App
EB 2.3.5 ROM V2.0

glynnpel said:
Just want to make sure what it means of a full wipe. Does it mean wiping data,cache and dalvik ? And does this erase the applications ? Specially if your updating from a older rom ver. To a new one. Sorry for my noobness and thanks for the info in advance.
Sent from my LG-P999 using XDA App
EB 2.3.5 ROM V2.0
Click to expand...
Click to collapse
Full mean everything cache, dalvik cache, data, and even system this will delete all your personal apps. Do this when going to different roms (cm7 to miui, or froyo to gb) when updating the same rom its not really necessary, but you can wipe cache and dalvik cache (wipe these two when flashing kernels) just to be safe, dalvik and cache wiping will not delete your personal apps.

glynnpel said:
Just want to make sure what it means of a full wipe. Does it mean wiping data,cache and dalvik ? And does this erase the applications ? Specially if your updating from a older rom ver. To a new one. Sorry for my noobness and thanks for the info in advance.
Sent from my LG-P999 using XDA App
EB 2.3.5 ROM V2.0
Click to expand...
Click to collapse
Follow fcisco13's advice. If you wipe data/factory reset from clockworkmod it will wipe data, cache, and dalvik cache all at the same time. So just do that and then format /system and you'll minimize issues.
As said above, if you're only updating to a newer version of the same rom, or to a new kernel, then just wipe cache and dalvik cache.
Sent from my LG-P999 using XDA App

Thanks guys , appreciate the info
Sent from my LG-P999 using XDA App

I wipe wipe wipe and even factory reset and re-flash rom but I still have old app/game on the phone.
What am I doing wrong??

kvnd said:
I wipe wipe wipe and even factory reset and re-flash rom but I still have old app/game on the phone.
What am I doing work??
Click to expand...
Click to collapse
Which rom did you re-flash?
Sent from my LG-P999 using XDA App

Weapons G2x 2.5

phburks said:
Follow fcisco13's advice. If you wipe data/factory reset from clockworkmod it will wipe data, cache, and dalvik cache all at the same time. So just do that and then format /system and you'll minimize issues.
As said above, if you're only updating to a newer version of the same rom, or to a new kernel, then just wipe cache and dalvik cache.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Also a good idea after flashing something new or updating before restarting always (fix permissions)
This will prevent most fc's...
Sent from my LG-P999 using xda premium

kvnd said:
Weapons G2x 2.5
Click to expand...
Click to collapse
Hmmm ... during the initial setup of Android are you selecting to let Google backup/restore your apps and settings? If so then your phone will automatically download and restore apps and setting that were backed up to Google's servers from your previous installation.
Sent from my LG-P999 using XDA App

Dirty vs Clean Flash

A dirty flash is only wiping cache and davlik then flashing your ROM....
a Clean flash is at LEAST factory reset/data wipe + wiping davlik(factory wipe takes care of /cache also)... Maybe doing a format /system also.
SO let the games begin! Which is better?! FIGHT!!
...

Brian Gove said:
A dirty flash is only wiping cache and davlik then flashing your ROM....
a Clean flash is at LEAST factory reset/data wipe + wiping davlik(factory wipe takes care of /cache also)... Maybe doing a format /system also.
SO let the games begin! Which is better?! FIGHT!!
...
Click to expand...
Click to collapse
If I switch ROM's I factory reset then wipe cache and dalvik cache. If it's a theme for example I only wipe cache and dalvik cache since the theme is suppose to be made for your ROM right?....don't see the reason to reflash the ROM as well.

Wipe data? What's that for? Is THAT why my phone won't turn on..........
Nightlies: No data wipe (yes to cache/dakvik)
New rom, even if it's the same android build: always, full wipe
Themes: No wipe at all, flash right on, right after flashing rom's. Don't like to wait for two bootups!
Sent from my SCH-I535 using xda premium

Il throw a vote to whichever works.. I usually dirty wipe.. If I have issues then clean it and try again.. With nightlies I tend to be fine dirty a lot, but even still I will do a clean every couple weeks just because..

why do so many folks wipe cache and dalvik after they wipe data? A data wipe/factory reset wipes all three, there is no need to do anything else.
I always wipe data, flash rom, then advance restore data only from a nandroid...dirty flashing in its most elegant form

So we all agree that a dirty flash is just wipe cache/dalvik cache.
Do you wipe prior to re-flashing, or afterwards? Does it matter?
Sent from my SCH-I535 using xda app-developers app

What about flashing a new, updated kernel for a rom you're currently using? What steps should be taken for that? For example, cleanrom 2.1 comes with cleankernel 1.1, but the kernel has been updated to 1.2 and is out as a seperate download. How would you update just the kernel that's made specifically for the rom you use?

xxx420 said:
What about flashing a new, updated kernel for a rom you're currently using? What steps should be taken for that? For example, cleanrom 2.1 comes with cleankernel 1.1, but the kernel has been updated to 1.2 and is out as a seperate download. How would you update just the kernel that's made specifically for the rom you use?
Click to expand...
Click to collapse
Dirty wipe
Sent from a SYNERGIZED GalaxySIII

When I dirty flash, I wipe data cache n dalvik cache. Once I flash what I wanted, I wipe those two once again n select "fix permissions" just in case
Sent from my SCH-I535 using Tapatalk 2

apet8464 said:
So we all agree that a dirty flash is just wipe cache/dalvik cache.
Click to expand...
Click to collapse
I disagree. I believe a dirty flash also wipes system. If you are 100% certain that your ROM build effectively wipes system as part of it's install routine, then you could skip this step, however I always wipe system to be safe. This works for me and I rarely need to wipe data or sd card(s).
---------- Post added at 11:01 AM ---------- Previous post was at 10:57 AM ----------
xxx420 said:
What about flashing a new, updated kernel for a rom you're currently using? What steps should be taken for that?
Click to expand...
Click to collapse
When changing Kernels but not the ROM in a separate recovery session than a ROM flash, you don't need to "dirty wipe." Just wipe cache and dalvik. Dalvik wipe is key so that the dalvik virtual machine can be rebuilt by the new kernel.

Thanks for the info guys.

I usually dirty on nightlies until I have issues. Always clean when switching roms.
Sent from my SGH-I535 using xda app-developers app

It is always good to complete wipe when switching roms.
Sent from my SCH-I535 using xda premium

What if im just switching between stock rom nandroid backups? Can I just restore from one to one? I only have two backups anyways both for stock. Never flashed a rom before
Tap'n

grin0048 said:
This isn't meant to be rude or anything, I'm just honestly wondering if there's any logical reason to think this is substantively different than just not wiping data?
Click to expand...
Click to collapse
I find that this method works better than just wiping cache and dalvik, since im advance restoring data over a clean flash. both ways are considered dirty flashing tho.

I wipe dalvik, cache and battery stats. Works like a charm thus far. Wiping data is what blows out the IMEI correct?

coldhardtruth said:
I wipe dalvik, cache and battery stats. Works like a charm thus far. Wiping data is what blows out the IMEI correct?
Click to expand...
Click to collapse
Incorrect, flashing anything is what may lead to losing your IMEI. Backup using the appropriate tools in the development section. Btw stop wiping battery stats, it's not necessary.
Sent from my SCH-I535 using xda app-developers app

droidstyle said:
why do so many folks wipe cache and dalvik after they wipe data? A data wipe/factory reset wipes all three, there is no need to do anything else.
I always wipe data, flash rom, then advance restore data only from a nandroid...dirty flashing in its most elegant form
Click to expand...
Click to collapse
Factory reset doesn't touch the davlik(Which I speculate(Guess) has to do more with the kernel than anything)
apet8464 said:
So we all agree that a dirty flash is just wipe cache/dalvik cache.
Do you wipe prior to re-flashing, or afterwards? Does it matter?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
This is what I meant as a dirty flash when I made the thread yes...
xxx420 said:
What about flashing a new, updated kernel for a rom you're currently using? What steps should be taken for that? For example, cleanrom 2.1 comes with cleankernel 1.1, but the kernel has been updated to 1.2 and is out as a seperate download. How would you update just the kernel that's made specifically for the rom you use?
Click to expand...
Click to collapse
Usually when I flash a new kernel, or a different kernel, I just wipe the davlik cache and I am fine. There was some reboots after the first boot on the AOSP ROMs but afterwards it ran fine.
SlimSnoopOS said:
Incorrect, flashing anything is what may lead to losing your IMEI. Backup using the appropriate tools in the development section. Btw stop wiping battery stats, it's not necessary.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
SlimSnoop is correct. According to one of the developers of a very prominent ROM the IMEI issue was because our phones got confused sometimes(Randomly phone to phone) and tried to reset during a flash. The data it tried to reset was bogus, therefor losing IMEI. He is also correct far as the wiping battery stats. It's only usefull when you have really strange results with battery. Google for the real reason to use them.
Far as backing up your IMEI so you will never run into the problem of losing it.... go into your terminal (almost every ROM has a Terminal emulator)
Type this:
su
then hit enter. Grant permissions
then type:
reboot nvbackup
then hit enter. This will make your phone do some shyt and reboot, but you really shouldn't need to worry about your IMEI after this. Regardless of how many ROMs you flash or what you do or who you date or who you kiss, etc... blah blah....
This really should be the end all for the IMEI...

annoyngduck said:
Wipe data? What's that for? Is THAT why my phone won't turn on..........
Nightlies: No data wipe (yes to cache/dakvik)
New rom, even if it's the same android build: always, full wipe
Themes: No wipe at all, flash right on, right after flashing rom's. Don't like to wait for two bootups!
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
New rom only when their bases are different , like going from ics to jb, or the dev says to do it (Even then Ill try it without a wipe because im lazy).
Themes I never wipe anything
Nightlies never wipe anything.
Edit: If I do have issues I then go back and wipe delvik and cache . That usually straightens out any issues and allows me to keep my setup.

tonu42 said:
Hey but you know I'm right
Click to expand...
Click to collapse
Actually you're not right.
Sent from my SCH-I535 using Tapatalk 2

I seriously can't figure it out.

I've been tinkering with androids for well over a year now and have rooted unlocked and s-off'ed amongst other things many different devices. For some reason I'm having trouble flashing kernels to my s3. Yes I'm unlocked and yes I'm flashing aosp kernels to aosp roms and touchwiz kernels to touchwiz roms. The problem seems most persistent on aosp roms and yes I've also checked that they both had the same cm10 commits. The only kernel I could get to boot was clean kernel on beans custom. Other than that no other kernels will work. The device will boot then the screen will start glitching up and then eventually bootloop. I've also made sure to wipe dalvik and cache plus fix permissions. I've also tried just flashing the kernel after doing a full wipe and starting with a new rom and have root 66ed back to stock and re unlocked. Is there something I'm missing here? I'm getting frustrated as I love custom kernels. Oh and the latest combo I tried was liquid smooth rc3 and lean kernel 1.0. Thanks guys.
Sent from my SCH-I535 using xda app-developers app

did you try wiping cach, davik cach, and fix permissions AFTER flashing then reboot?
Ofc wipe cach and dalvik cache before also.

My usual process goes something like this
*Wipe Cache
*Wipe Dalvik
*Flash Kernel
*Wipe Cache & Dalvik again
*Fix Permissions
Works like a charm every time.
Samsung Galaxy S3

i have had the same trouble once...fixed it by flashing back to a stock kernel first.
try this:
wipe cache & dalvik
flash stock kernel.zip- http://db.tt/ceeDTAfz
flash custom kernel
reboot

Is that the stock cm10 kernel or touchwiz? Also yes I've tried wiping before and after and fixing permissions. So weird and its driving me nuts. I miss having awesome battery life
Sent from my SCH-I535 using xda developers app

sumredhed567 said:
Is that the stock cm10 kernel or touchwiz? Also yes I've tried wiping before and after and fixing permissions. So weird and its driving me nuts. I miss having awesome battery life
Sent from my SCH-I535 using xda developers app
Click to expand...
Click to collapse
stock kernel = stock TW kernel
Sent from my SCH-I535 using xda app-developers app

Tried flashing the stock kernel still same thing. It's so weird. It will begin to boot and then boot animation will start flickering or flashing then glitch up. With every kernel it's the same result.
Sent from my SCH-I535 using xda app-developers app

sumredhed567 said:
Tried flashing the stock kernel still same thing. It's so weird. It will begin to boot and then boot animation will start flickering or flashing then glitch up. With every kernel it's the same result.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
another thing you might try is formatting system in cwm.

droidstyle said:
another thing you might try is formatting system in cwm.
Click to expand...
Click to collapse
I've tried that a few times when doing a fresh rom install. I mean root66ing through odin should completely wipe everything. I just don't see what I'm missing. I've even tried using a different recovery and still the same. Could it just be something specific to my phone? I'm so freaking stumped!!

sumredhed567 said:
I've tried that a few times when doing a fresh rom install. I mean root66ing through odin should completely wipe everything. I just don't see what I'm missing. I've even tried using a different recovery and still the same. Could it just be something specific to my phone? I'm so freaking stumped!!
Click to expand...
Click to collapse
now when you odin back to stock, your booting into stock recovery after flashing the rom(root66) and doing a data wipe/factory reset correct? you said full wipe, but just want to be clear. it may be corrupted internal memory and might need to be reformatted.

I actually don't think I was wiping after I used Odin. I'll try that as soon as I get home. Though I have done plenty of factory data resets and system wipes, just not right after I odined. And you mentioned formatting how would I go about doing that?
Sent from my SCH-I535 using xda app-developers app

sumredhed567 said:
I actually don't think I was wiping after I used Odin. I'll try that as soon as I get home. Though I have done plenty of factory data resets and system wipes, just not right after I odined. And you mentioned formatting how would I go about doing that?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
follow section 6 of my guide...link in sig!

Always perform a full/mega wipe as:
1) Wipe data/factory reset
2) Wipe cache partition
3) Wipe dalvik cache
4) In mounts/storage section wipe /system
5) wipe /data
6) wipe /cache
7) wipe /preload
Then flash new ROM.
For flashing a kernel, please perform steps 2 and 3.