Warning:
** I'm NOT responsible for any damage caused to your device by using these files so use them on your OWN risk.
** The bootloader was removed from the blob
** This update will not replace your custom recovery (stock recovery was removed from the blob)
** I only tested with TWRP but it should work with CWM recovery too
** Verify your MD5 checsum after download
Requirements
* Your device must be unlocked and rooted
* You must have a custom recovery installed (CWM or TWRP)
* These OTAs are incremental updates
* You need to be on STOCK Jelly Bean 10.4.4.16 or 10.4.4.18 ROM with no modifications to system files (build.prop,etc) (no need to do the Factory Reset)
* Use OTA RootKeeper before installing this update if you want to keep ROOT
Installation
1) Download the file for your specific SKU
2) Move the downloaded file on your internal or external storage
3) Boot your device in Recovery
4) Install the update / That's it,wait for the install proccess to finish
Download
US_SKU --> TF700T_US_SKU_OTA_10.4.4.18
WW_SKU --> TF700T_WW_SKU_OTA_10.4.4.18
WW_SKU --> TF700T_WW_SKU_OTA_10.4.4.20
Please report if it's working or not!!!
failed on framework/android.policy.jar ...
cwm
Just flashed this update using twrp and all worked fine, Thanks.
Pretoriano80 said:
US_SKU --> TF700T_US_SKU_OTA_10.4.4.18
Click to expand...
Click to collapse
I've made WW available here.
there is a flashable .zip?
xcal321 said:
I've made WW available here.
Click to expand...
Click to collapse
THX,first post updated with the WW_SKU version.
Pretoriano80 said:
THX,first post updated with the WW_SKU version.
Click to expand...
Click to collapse
thx bro
how do you know if your tablet is the US or WW version
Pretoriano80 said:
Warning:
** I'm NOT responsible for any damage caused to your device by using these files so use them on your OWN risk.
** The bootloader was removed from the blob
** This update will not replace your custom recovery (stock recovery was removed from the blob)
** I only tested with TWRP but it should work with CWM recovery too
** Verify your MD5 checsum after download
Requirements
* Your device must be unlocked and rooted
* You must have a custom recovery installed (CWM or TWRP)
* You need to be on STOCK 10.4.4.16 ROM with no modifications to system files (build.prop,etc) (no need to do the Factory Reset)
* Use OTA RootKeeper before installing this update if you want to keep ROOT
Installation
1) Download the file for your specific SKU
2) Move the downloaded file on your internal or external storage
3) Boot your device in Recovery
4) Install the update / That's it,wait for the install proccess to finish
Download
US_SKU --> TF700T_US_SKU_OTA_10.4.4.18
WW_SKU --> TF700T_WW_SKU_OTA_10.4.4.18
Please report if it's working or not!!!
Click to expand...
Click to collapse
Working great so far. Thanks.
Came from clean rom 2.0
I reflashed my stock 16 then flashed this one over it.
I did get a strange upgrade notice after flashing the ota that there was an update available but it was for 16.
Froze up apps with titanium and alls well.
Had to uninstall browser2ram 'cause it kept causing su shell access messages and wouldnt retain settings
---------- Post added at 08:19 PM ---------- Previous post was at 08:17 PM ----------
deocare said:
how do you know if your tablet is the US or WW version
Click to expand...
Click to collapse
settings>about tablet>build number
Not work :'(
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tapatalked with my insertcoined HTC One X
*$M3RT$* said:
Not work :'(
tapatalked with my insertcoined HTC One X
Click to expand...
Click to collapse
LRiley said:
failed on framework/android.policy.jar ...
cwm
Click to expand...
Click to collapse
You need to be on Clean Stock Jelly Bean if you want to install this update (same goes for the official update),but you are not,that's why you got that error.
Guys, I'm quite new to all the flashing techniques.
Could anyone explain how to install this update over CleanROM 2.0 ?
Do I need to flash 10.4.4.16 first ? If I do, do I need to do factory reset to reset CleanROM 2.0 settings ?
Pretoriano80 said:
You need to be on Clean Stock Jelly Bean if you want to install this update (same goes for the official update),but you are not,that's why you got that error.
Click to expand...
Click to collapse
I'm on stock .16. I only change the bootanimation.
Now I know why it not works. Becouse I use Extended Power Menu.
jodvova said:
Guys, I'm quite new to all the flashing techniques.
Could anyone explain how to install this update over CleanROM 2.0 ?
Do I need to flash 10.4.4.16 first ? If I do, do I need to do factory reset to reset CleanROM 2.0 settings ?
Click to expand...
Click to collapse
You can't install over CleanRom,you need to go back to stock JB first.Or you can wait until CleanRom will include this update.
Pretoriano80 said:
You can't install over CleanRom,you need to go back to stock JB first.Or you can wait until CleanRom will include this update.
Click to expand...
Click to collapse
Is there a guide about how to go from a custom rom to a stock one ? Is it just a simple flash via TWRP ?
jodvova said:
Is there a guide about how to go from a custom rom to a stock one ? Is it just a simple flash via TWRP ?
Click to expand...
Click to collapse
Take a look at this to restore back to stock.
http://forum.xda-developers.com/showthread.php?t=1833212
Read section" *** Factory Restore after a softbrick/Downgrade from Jelly Bean to ICS/Clean Factory Restore ***
The full stock .18 ROM has been posted on the ASUS support site, so no point in downgrading to stock .16 and then flashing the OTA.
You could also try this rooted flashable zip version made by Scott "CleanROM" scrosler if you are not 100% stock.
http://forum.xda-developers.com/showthread.php?t=1943227
Hmmmmm. I was able to install the factory 18 file over clean Rom 2 with no issues using twrp. I just cleared caches and installed it like any other Rom.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
jimbob_sf said:
Hmmmmm. I was able to install the factory 18 file over clean Rom 2 with no issues using twrp. I just cleared caches and installed it like any other Rom.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Click to expand...
Click to collapse
Yes,you can do that with the official 10.4.4.18 rom because that it's the full rom,and you can install it with CWM or TWRP over any ROM you want but you will loose the custom recovery too,basically you will get full stock 10.4.4.18 Jelly Bean rom.
Related
Root, Custom Recovery, and Unlocked Bootloader for Jelly Bean OTA (4.1.1 or 4.1.2)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Description: Since the previous root method that worked in ICS has been blocked in Jelly Bean. I've decided to create this simple guide (loosely based on this thread) that will allow you to root, flash a custom recovery of your choosing, and unlock the bootloader on your Verizon Galaxy S III device if you just received the official Jelly Bean OTA (without having to flash a factory image).
Video Demo of Process - (Courtesy of DroidModd3rX) - Link Here
Step 1 - Preparation
Download and Install Samsung Official USB Drivers - Link
Download and extract ODIN v3.07 - Link
Download one of the below
For Root Only - Download SuperSU to your SD Card - Link
For Unlocked Bootloader Only - Download Verizon Galaxy S III Unlocked Bootloader to your SD Card - Link
For Both Root and Unlocked Bootloader ***RECOMMENDED*** - Download SuperSU + Unlocked Bootloader to your SD Card - Link
Download the VRALEC Bootchain - Link
MD5: 8C45B7FBACEFB65B173E2B4679BCF8E4
Download one of the below
For ClockworkMod Touch Recovery 6.0.2.3 (Download this to your computer) - Link
MD5: 78D8EEC8ADC5B04AE6221A21CF25A018
For TWRP Recovery 2.4.3.0 (Download this to your computer) - Link
MD5: 4B993052BB4905647FBD8B44E6096214
Download the correct Bootchain
For VRBLK3 (Jelly Bean 4.1.1) Link
MD5: E3A1CB07DE214ED8081ED9D42C9BAF4A
For VRBMB1 (Jelly Bean 4.1.2) Link
MD5: 8C3DA18BD5DEF7E38E03DD147A0E10A1
For VRBMD3 (Jelly Bean 4.1.2) Link
MD5: 9CB65EAE8784807349EC3D4FF3A0AAEF
Click to expand...
Click to collapse
Step 2 - Flashing VRALEC Bootchain to allow Custom Recovery
Boot phone into ODIN mode (See here for how-to)
Flash the VRALEC Bootchain using ODIN v3.07 (See here for guide on flashing)
Click to expand...
Click to collapse
Step 3 - Installing a Custom Recovery
Boot phone into ODIN mode (See here for how-to)
Uncheck the "Auto Reboot" box in ODIN ***VERY IMPORTANT***
Flash the recovery of your choice using ODIN v3.07 (See here for guide on flashing)
Once the flashing is complete, disconnect your USB cable, take out your battery, then put it back in
Boot phone into Recovery mode (See here for how-to)
At the end of this step you should now be looking at your custom recovery screen (if you don't see it you will have to do the step over again)
Click to expand...
Click to collapse
Step 4 - Rooting Your Device and Unlocking Your Bootloader
Using your custom recovery flash the download you chose above from Step 1 (#3)
Upon exiting your custom recovery to reboot first time, you will be asked if you want to "Disable recovery flash", you MUST select Yes
After reboot, your ROM will now be fully rooted, have a custom recovery, and/or your bootloader unlocked as well
Click to expand...
Click to collapse
Step 5 - Restoring your Jelly Bean Bootchain
This step is optional but recommended to return your original partitions after you see everything is working properly
Boot phone into ODIN mode (See here for how-to)
Flash the Jelly Bean Bootchain from Download #6 using ODIN v3.07 (See here for guide on flashing)
After a final reboot, you are all set to use your device as needed
Click to expand...
Click to collapse
Credits
Credit goes to "source requested to remain anonymous" for providing the original VRBLK3 leak (via PM)
Credit goes to cnlson for providing ftp filehosting (via PM)
Credit goes to AdamOutler and African-Canadian Sock Monkey for providing the Verizon Galaxy S III Unlocked Bootloader (Original Post)
Credit goes to invisiblek for providing the VRALEC Bootchain allowing custom recovery flashing (Original Link)
Credit goes to Chainfire for creating SuperSU (Original Post)
Credit goes to Koush for creating ClockworkMod Recovery (Original Link)
Credit goes to Dees_Troy for creating TWRP Recovery (Original Post)
Thanks for putting this up so fast, will sure come in handy to many people over the next few days.
Can't you just root and use the market apps ez recovery and ez unlock to do all that from the phone?
Sent from my SCH-I535 using xda app-developers app
cell128 said:
Can't you just root and use the market apps ez recovery and ez unlock to do all that from the phone?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Unfortunately not. In order to just root Jelly Bean, a custom recovery is required first. And you can't use EZ recovery or EZ unlock without being rooted in the first place. Hence, this is the reason I have created this guide for people who are coming from stock Jelly Bean.
Any idea if ota rootkeeper will work?
Sent from my SCH-I535 using Tapatalk 2
edthesped said:
Any idea if ota rootkeeper will work?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
It worked for people throughout all ICS OTA's. With Jelly Bean it's hard to say, we will just have to wait and see. Worst case? That's what this guide is for to get it all back for you. :good:
I am still on the K3 Wipe leak from your other thread. So now I should just follow the directions in this thread instead?
Sent from my cm_tenderloin using Tapatalk 2
fanto3k4 said:
I am still on the K3 Wipe leak from your other thread. So now I should just follow the directions in this thread instead?
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
If you used the Wipe image instead of No-wipe then you are 100% stock so you will have to use this method instead.
open1your1eyes0 said:
If you used the Wipe image instead of No-wipe then you are 100% stock so you will have to use this method instead.
Click to expand...
Click to collapse
Thought I was going crazy because I couldn't figure out what I was doing wrong when trying to flash recovery. Kept getting a fail message in Odin. Then I found this thread and once again you have saved the day. Thank you, sir.
open1your1eyes0 said:
It worked for people throughout all ICS OTA's. With Jelly Bean it's hard to say, we will just have to wait and see. Worst case? That's what this guide is for to get it all back for you. :good:
Click to expand...
Click to collapse
You might have the recovery numbers swapped in Step 2? #7 #8
ClockworkMod Touch Recovery 6.0.1.2
TWRP Recovery 2.3.1.0
skeeterpro said:
You might have the recovery numbers swapped in Step 2? #7 #8
ClockworkMod Touch Recovery 6.0.1.2
TWRP Recovery 2.3.1.0
Click to expand...
Click to collapse
Minor typo. Fixed. Thanks.
open1your1eyes0 said:
Minor typo. Fixed. Thanks.
Click to expand...
Click to collapse
Anytime. Happens to me ALL the time!
Thanks for the guide. Will utilize once OTA installs.
Dumb question . . . what is advantage/disadvantage of returning to a stock bootchain?
SteveGrandRapids said:
Dumb question . . . what is advantage/disadvantage of returning to a stock bootchain?
Click to expand...
Click to collapse
Mostly performance and bugs fixes on the preboot process of the device. But also take note that bootchains contain the RPM partition and VRALEC was built on a very early prerelease ICS. Most likely you wouldn't see anything noticeable but I like to return it to the original intended partitions since that is what it was built-on.
open1your1eyes0 said:
Mostly performance and bugs fixes on the preboot process of the device. But also take note that bootchains contain the RPM partition and VRALEC was built on a very early prerelease ICS. Most likely you wouldn't see anything noticeable but I like to return it to the original intended partitions since that is what it was built-on.
Click to expand...
Click to collapse
. . . I now have your NO WIPE K3 on my phone . . . safe to assume that it has the VRALEC bootchain to allow for adding a custom recovery, correct? Then if I elect to add CWM, root/unlock, the final step would be to return to the stock bootchain . . . even deciding not to root, one should return to stock bootchain, correct?
SteveGrandRapids said:
. . . I now have your NO WIPE K3 on my phone . . . safe to assume that it has the VRALEC bootchain to allow for adding a custom recovery, correct? Then if I elect to add CWM, root/unlock, the final step would be to return to the stock bootchain . . . even deciding not to root, one should return to stock bootchain, correct?
Click to expand...
Click to collapse
That's correct. If you continue to follow my guide in the original thread you will see that Step 2 (when flashing the custom recovery) actually includes the stock bootchain packaged with it as well, so you are flashing custom recovery and bootchain all at the same time. Or, you can just follow from step 2 of this thread and will achieve the same thing. However you prefer.
Does the debug fs method not work?
Sent from my SCH-I605 using xda app-developers app
I get failed to verify whole-file signature on the supersu file
Sent from my SCH-I535 using Tapatalk 2
Skyllos said:
I get failed to verify whole-file signature on the supersu file
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I'm getting the same error.
Skyllos said:
I get failed to verify whole-file signature on the supersu file
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
338lapuaAI said:
I'm getting the same error.
Click to expand...
Click to collapse
Regular SuperSU (#3) or the SuperSU + Bootloader (#5)?
EDIT: Which recovery are you using?
[Easy upgrade to 4.3][OS 4.3 MK9][03/01/2014]GT-N7100
Code:
*** Disclaimer
-- Flashing roms especially with bootloaders are dangerous, make sure you make a nandroid backup before hand,Please follow the instructions carefully
Introduction
The aim of this project is to make easy to upgrade to 4.3 or downgrade to 4.1.
This rom is the official samsung 4.3 [N7100XXUEMK9] without knox files or bootloader.
Rom is for people that wish to upgrade to 4.3 and keep their device in Official status without knox.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation instructions via Odin pc
You must reset your device to factory defaults before flashing.
Download file and extract it
Put your device into download mode [volume down, power button and home button]. Keep them pressed until the download mode shows up then press volume up]
Launch Odin ,select pda and browse to Final.tar.md5 and press start in Odin.
this will take a while
Done!
Click to expand...
Click to collapse
Installation instructions via Mobile Odin
Copy final.tar.md5 to the storage card of your device
-- Tap the Open file … tab mobile odin ,
browse to the final.tar.md5 location and select it,
tick all boxes under everoot and Wipe [this will **root the rom and wipe the device]
Now press flash Firmware
Now you must Download and flash this package Via pc Odin!
Done!
Click to expand...
Click to collapse
Notes:
Click to expand...
Click to collapse
If Odin fails don't despair put you phone into download mode again and re-flash even if it happens more that once.
Avoid Usb 3 ports.
Click to expand...
Click to collapse
Rooting instructions
option-1Kingo root download the program and install on your pc follow the instructions to root your device.
option 2 option Chainfire CF-AUTO-ROOT you will need triangle away to reset your binary count after.
option 3- **Chanfire Mobile Odin
Click the above Options to redirect you to theirs respective pages.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Download
Download rom from link below
-- Download
Click to expand...
Click to collapse
Changelog
Code:
Current changelog: -- 03/01/2014
[BASE] -- MK9 BTU
[BUILD NUMBER]-- JSS15J.N7100XXUEML3
KERNEL] -- 3.0.31-2138564
[BOOTLOADER] -- MJ5
[RADIO] -- MJ9
[SELINUX STATUS] ENFORCING
FAQ
How to downgrade to 4.1?
Coming soon.....
Can i flash a custom rom after this?
Yes .
Can i use this package to Set my device to OFFICIAL status?
yes, After flashing it use Triangle away to Fix your Status.
Can i use this Rom to revert Knox to X0?
NO.
Will this package Trigger my binary?
No.
Q. I have already flashed a 4.3 custom rom, can i still flash this?
Yes
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* Chaifire,Kingo root, and all XDA Developers.
* insert text
XDA:DevDB Information
4.3 upgrade, a ROM for the Samsung Galaxy Note II
Contributors
faria
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.0.x
ROM Firmware Required: 4.1
Based On: Stock Samsung
Version Information
Status: Stable
Created 2014-01-04
Last Updated 2014-01-04
Click to expand...
Click to collapse
Click to expand...
Click to collapse
reserved*****
Does this wipes data ?
Or can I do an "upgrade" from stock rooted (4.1, flashed via Odin) to this version ?
No It doesn't wipe data, if you got rooted stock It should be fine. Never the less a backup and a wipe is recommended.
Sent from my GT-N7100 using Tapatalk
so if i am on 4.1.2.....and follow d procedure....i will have knox counter as 0?
what about recovery? which recovery you would suggest provided it shouldnt set the counter to 1....as i dont want to void the warranty...??
and thanks for the latest 4.3 for note II...been waiting for the simple instructions !!:highfive:
swapyworld said:
so if i am on 4.1.2.....and follow d procedure....i will have knox counter as 0?
what about recovery? which recovery you would suggest provided it shouldnt set the counter to 1....as i dont want to void the warranty...??
and thanks for the latest 4.3 for note II...been waiting for the simple instructions !!:highfive:
Click to expand...
Click to collapse
1- Yes
2- you can flash any recovery you wish, but of course it will trigger the binary count if you wish to remove the binary count you must flash this package from here http://forum.xda-developers.com/showthread.php?t=2588557 and then run triangle away.
reserved.. thanx
Sent from my GT-N7100 using Tapatalk
I'm a bit lost in all those firmware versions
I'm trying to update my girlfriend's note2 to 4.3
Here is her phone's info :
Baseband : N7100XXDME4
Version number : JZ054.N7100XXDME6
CSC : N7100XADME2
No recovery installed, and counter still at 0
Can I flash your version safely from her version ?
@ bud77.Yes.
Sent from my GT-N7100 using Tapatalk
wrongpost
Worked perfectly, plus root via kingoapp
I noticed it is odexed, do you plan on a deodexed one ?
Sent from my Nexus 5
I will give a try, but my priority is to make it prerooted like a did before but on 4.3 the root gets disabled at first boot, so far.
Now that you are on 4.3 you can install a 4.3 deodexed rom via custom recovery or mobile odin, there is 2 such rooms in the development treads.
Sent from my GT-N7100 using Tapatalk
Everything went ok with the upgrading, except that Triangle Away not seem to work anymore?
I have run version 3.10 + unfreezed the sysscope file in Titanium B, but I'm still "custom".
Maybe it doesn't work when I have used the Kingo root? Do you have any advice..?
Regards
Unfreeze sysscope, unistall triangle away, reboot, clear cache and wipe data of sysscope and Interprise sysscope, now reinstall triangle away an run it.
Sent from my GT-N7100 using Tapatalk
I heard many comments about Mobile Odin not working with 4.3
Has anyone successfuly flashed this?
I have Mobile Odin Pro and 4.1.2
My phone is rooted but with a stock Samsung ROM.
Wondering if 4.1.2>4.3 will go smoothly with Mobile Odin and this ROM, keeping root. Anyone?
If you follow my instructions for mobile odin it should work. ?
Sent from my GT-N7100 using Tapatalk
faria said:
Unfreeze sysscope, unistall triangle away, reboot, clear cache and wipe data of sysscope and Interprise sysscope, now reinstall triangle away an run it.
Click to expand...
Click to collapse
Did it all, in the exact order. Still custom. What gives?
With 4.1.2 it worked fine, but I used CF autoroot then.
Thanx for trying to help.
Televinken said:
Did it all, in the exact order. Still custom. What gives?
With 4.1.2 it worked fine, but I used CF autoroot then.
Thanx for trying to help.
Click to expand...
Click to collapse
Still "custom"where? In the Os or download mode? Your binary is 0 rigth?
Sent from my GT-N7100 using Tapatalk
faria said:
Still "custom"where? In the Os or download mode?
Click to expand...
Click to collapse
In the OS. So now OTA is gone, & so is updating via Kies.
When I check the binary, it shows "1". *sigh*
Televinken said:
In the OS. So now OTA is gone, & so is updating via Kies.
When I check the binary, it shows "1". *sigh*
Click to expand...
Click to collapse
Flash this package then run triangle away . http://forum.xda-developers.com/showthread.php?t=2588557
Sent from my GT-N7100 using Tapatalk
This is the first of many guides I will be posting and keeping up with.
It will be utilized for Q&A FAQ and HOW TO so we can keep the development thread for development purposes.
Post your questions and Myself or other knowledgeable users of Sac23 ROMS will answer as quickly as possible.
So ......
For starters HOW TO INSTALL a ROM by SAC23
PRE REQUISITE ... YOU MUST BE ON THE 5.0 BOOTLOADER TO RUN THIS ROM
If you need to flash back to a previous stock bootloader
Mini-bootloaders - TWRP or Philz recovery already embedded:
Firmware_Only_Odin_Flashable_ Images_For_4.4.. And_5.0_Roms
Full bootloaders:
4.4.4 - G900PVPU1ANK4_G900PSPT1ANK4_SPR.zip
4.4.2 - [LINK][ROM][ODIN][TAR]SM-G900P NE5 (NE5 Modem/Kernel/ROM - Stock)
Installing with TWRP (View All Supported Devices>>> Find TWRP for your device):
Philz can be used and I will post instructions for it later
This assumes that you ALREADY have TWRP Recovery installed on your phone and you know how to use it.
TWRP Recovery by Ktoonsez: 01.13.2015: http://goo.gl/LgBsuk
Download the ROM of choice...move it onto the EXT SD CARD.
VERY IMPORTANT>>> Move all music, pics, important data from internal storage to the ext SD card and/or to your pc, etc. because during this process, the internal will be completely erased.
Recommended Method to Flash SACS Custom ROMS using TWRP
Boot into TWRP
Select Wipe > Advanced Wipe
Select Dalvik, System, Data, Internal Storage, and Cache. Swipe to Wipe (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Select Format Data, Type YES, Press GO. (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Swipe to Factory Reset. (do this THREE TIMES)
Go back to MAIN menu and STOP HERE !!!!! READ NEXT STEP CAREFULLY....
[*]Select REBOOT INTO RECOVERY mode and Swipe to Install Super User. DO NOT REBOOT INTO SYSTEM!
[*]AFTER THE PHONE REBOOTS INTO RECOVERY:
NOW proceed with installing The ROM
Select Install Zip, Drill down to Sac23's Rom you want to flash, and Swipe to install.
Follow on screen instructions (if there are any).
When prompted, REBOOT SYSTEM.
THE FIRST BOOT WILL TAKE A MINIMUM OF 20 MINUTES..... SOME DEVICES EVEN LONGER...
.
.
HAVE PATIENTS
When the Home Screen appears and it is obvious that the install has completed, allow the phone to settle for another 10 minutes BEFORE you begin setting up your personal preferences and accounts.
If everything seems normal, set your phone up and profit.
After setting up your personal info and you are now ready, the first thing you should always do after flashing any ROM is to go to settings, system updates, and refresh/update your PRL & PROFILE then reboot the phone. Second thing is go to settings, more networks, mobile networks, network mode, and select LTE/CDMA.
saved 1
OP HOST LINK HERE
MY MIRROR HOST LINK HERE
MY ANDROIDFILEHOST LINK HERE
MD5 5a5aa948f33d1bc8eb280cd28335ad99
STOCK S5 FLASHABLE MESSAGING APP
STOCK S5 FLASHABLE MESSAGING APP
STOCK S5 MESSAGING APP & STOCK KEYBOARD
ORIGINAL S5 FLASHABLE WHITE KEYBOARD supplied with ver 1 ROM
TWRP Recovery by Ktoonsez: 01.13.2015: http://goo.gl/LgBsuk
Ktoonsez Touchwiz KERNEL Lollipop 5.0 VERSION: 01.03.2015: http://goo.gl/5Dyssj
Always do the following AFTER installing the kernel:
1. Clear cache
2. Clear dalvik
saved 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
saved 3
reserved for future use
saved 4
reserved for future use
saved 5
reserved for future use
Can you follow the install instructions if currently on a 4.4.2 or 4.4.4 firmware? Or do you have to odin NKD firmware first?
Ramer said:
Can you follow the install instructions if currently on a 4.4.2 or 4.4.4 firmware? Or do you have to odin NKD firmware first?
Click to expand...
Click to collapse
IF YOU ARE ON 4.42 FIRMWARE THE ROM WON'T BOOT UP YOU NEED 4.4.4 FIRMARE...
YOU CAN YOU FLASH THE NKD FIRMARE WITH ODIN AND RECOVERY AFTER YOU FLASH ..GO BACK TO RECOVERY AND INSTALL THE ROM
http://forum.xda-developers.com/spr...irmwareonlyodinflashabl-imagesfor4-4-t2958614
paco_1 said:
IF YOU ARE ON 4.42 FIRMWARE THE ROM WON'T BOOT UP YOU NEED 4.4.4 FIRMARE...
YOU CAN YOU FLASH THE NKD FIRMARE WITH ODIN AND RECOVERY AFTER YOU FLASH ..GO BACK TO RECOVERY AND INSTALL THE ROM
http://forum.xda-developers.com/spr...irmwareonlyodinflashabl-imagesfor4-4-t2958614
Click to expand...
Click to collapse
Im a little confused. So I have to flash 4.4.4 stock firmware if I'm on 4.4.2, then NKD stock firmware, and then I can flash this? I just want to make sure I'm reading this right.[emoji12]
Super stoked to try this out! Sacs, you do AMAZING WORK!!!!!!
Sent from my SM-G900P using Tapatalk
Ramer said:
Can you follow the install instructions if currently on a 4.4.2 or 4.4.4 firmware? Or do you have to odin NKD firmware first?
Click to expand...
Click to collapse
Thanks @Ramer ... Added to OP
chefbaker11 said:
Im a little confused. So I have to flash 4.4.4 stock firmware if I'm on 4.4.2, then NKD stock firmware, and then I can flash this? I just want to make sure I'm reading this right.[emoji12]
Super stoked to try this out! Sacs, you do AMAZING WORK!!!!!!
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
you NEED to flash the 5.0 bootloader then the rom
rlmiller said:
you NEED to flash the 5.0 bootloader then the rom
Click to expand...
Click to collapse
Thanks!!! This ROM is amazing! But you know that already, y'all been doing big things for years
Again, Great work and Thanks to all the people involved.
chefbaker11 said:
Thanks!!! This ROM is amazing! But you know that already, y'all been doing big things for years
Again, Great work and Thanks to all the people involved.
Click to expand...
Click to collapse
ORIGINAL S5 FLASHABLE KEYBOARD supplied with ver 1 ROM
rlmiller said:
ORIGINAL S5 FLASHABLE KEYBOARD supplied with ver 1 ROM
Click to expand...
Click to collapse
You guys are almost as fast at responding as your ROMs...lol. Thanks!
I have this swype modded blue with numbers row keyboard I use currently with latest m.o.a.r. im prepping to flash sacs now and wondering if you think this will work with it. I don't remember who released this or where I got it. but thank you to whom ever it was!
SHYZZA said:
I have this swype modded blue with numbers row keyboard I use currently with latest m.o.a.r. im prepping to flash sacs now and wondering if you think this will work with it. I don't remember who released this or where I got it. but thank you to whom ever it was!
Click to expand...
Click to collapse
There's a chance that it will work
Just remember you can flash the keyboard mod again if it breaks
If it works post the file here or move it to my mod section
Sent from my SM-G900P
rlmiller said:
There's a chance that it will work
Just remember you can flash the keyboard mod again if it breaks
If it works post the file here or move it to my mod section
Sent from my SM-G900P
Click to expand...
Click to collapse
Tried it and it just hung on boot after flashing....booo I let it sit for awhile too. Oh well. Another question. Can the clock be moved from center to righ side?
SHYZZA said:
Tried it and it just hung on boot after flashing....booo I let it sit for awhile too. Oh well. Another question. Can the clock be moved from center to righ side?
Click to expand...
Click to collapse
It cannot be moved yet sac is working on some additional mods for the next release
Sent from my SM-G900P
Thanks bud. Its cool it takes time for all the lil tweaks i know. But good to have you guys back man i missed sacs work for sure. You as well my friend! Always top notch!
Ss
For those who are having a hard time flashing TWRP using a PC, I just wanna share it to you guys! I have tested this myself on my Mi-4c
Note: This will not might not work if you are using stable/dev rom version 6.14 or higher due to locked bootloader. Please unlock your bootloader first
Requirements:
Mi-4c device
Full Developer ROM pack for our phone ( make sure you install GApps too)
TWRP image (TWRP 2.8.7.1 with English and Chinese V2 & V3)
TWRP Recovery 2.8.7.0 Dev ROM (Most Stable)
Flashify App
**And of course, courage and common sense
Disclaimer: Don't blame me if you brick your device, do it at your own risk.
1. Download a developer ROM from the official download page: Click Here or use this Developer ROM [/B]Note: This method might not work if you are using dev rom version 6.14 or higher due to locked bootloader. Please unlock your bootloader first[/B]
2. Flash the Developer ROM from the updater app and install GApps of course. Now, you should have root access on your phone.
3. Download the flashable TWRP zip from the original thread or below - Original TWRP Thread --- Thanks to 油炸包子-
TWRP Recovery 2.8.7.0 Dev ROM (Most stable especially for touch issues)
TWRP V2 Dev ROM Only
TWRP V3 Dev ROM or Stable
4. Open the TWRP .zip or .7z file you downloaded using an Archiver app or ES Explorer and you will find a recovery.img inside.
4.1 Extract the recovery.img to the root of your SDCard (you can rename it to anything you like just make sure the extension stays as .img)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Install Flashify from Playstore.
5.1 Launch the app, accept disclaimer then you will get a message that it needs root access.
5.2 Launch the Security app and provide root permission to Flashify.
6. After providing root permission to flashify, launch the app again and select Recovery image from the Flash tab, choose the extracted ".img" file that you have extracted to your SDCard then flash.
7. There should be a success "Flash complete" message then select "Reboot now" to reboot your phone.
Congratulations!! You should now have TWRP after reboot.
*****Access TWRP by powering the phone off, turn it back on by holding the power together with the volume up (+) button and it should take you to the TWRP screen if a few sec.*****
Want to update to TWRP V3? Follow the steps below:
Do this if you have the previous version (TWRP V2) installed, else, follow the steps above to get V3 directly.
Should you wish to update to the latest TWRP from the original thread: http://en.miui.com/thread-169401-1-1.html
1. Download the latest TWRP from your mobile: -
TWRP V3 Dev ROM or Stable
2. Extract the ".img" file, depends which ROM you're on if Developer or Stable.
3. Save it to the root of your SDCard
4. Boot your phone to recovery (Power & Volume (+) Up
5. Once on TWRP screen, select Install, from there you will need to select "Install Image" lower right, navigate to the root of your SDCard and select the ".img" you have previously extracted (TWRP V3), select "recovery" not boot, then Slide to Flash the new version.
Congrats! You have successfully updated your TWRP to V3.
Disclaimer: Don't blame me if you brick your device, do it at your own risk.
My original thread: Flash TWRP using Flashify App - No PC Needed (Dev ROM only)
great ! this is really easy even for noobs like me
ps2lover said:
great ! this is really easy even for noobs like me
Click to expand...
Click to collapse
Let us know if it works for you too. Thanks!
I flashed the TWRP, thanks for the help (Y). But where or how can I install GApps?
gmark247 said:
I flashed the TWRP, thanks for the help (Y). But where or how can I install GApps?
Click to expand...
Click to collapse
Just download the google apps from the mi store if u r using miui rom.
Hey! tnx 4 twrp, but touchscreen do not respond in recovery at all.
Is there anyway to fix it?
ILLnar said:
Hey! tnx 4 twrp, but touchscreen do not respond in recovery at all.
Is there anyway to fix it?
Click to expand...
Click to collapse
You'll have to wait about 2 mins then it starts working
You'll have to wait about 2 mins then it starts working
Click to expand...
Click to collapse
So, you mean this is normal behavior?
In my opinion, it's not.
ILLnar said:
So, you mean this is normal behavior?
In my opinion, it's not.
Click to expand...
Click to collapse
It shouldn't be like that, but that's how it is right now. I'm not sure if there's any fix available, but I guess an updated version of the recovery will be released soon, that has this problem fixed..
Yeah this method works I have done it and easy as drinkin beer
Sent from my Mi-4c using Tapatalk
Same here. Tested and working. I am on Mokee rom now.
Thanks for the guide but I found something wierd happening. After succesfully flashing twrp and rebooting it goes in twrp when I restart after that and try to go in recovery with volume up +power it takes me to stock recovery? Any ideas??:/
So version 3 works without any touch problems?
ermacwins said:
So version 3 works without any touch problems?
Click to expand...
Click to collapse
I'm using the v3 linked in this thread and the touch problem still exists. I have to wait 2-3 minutes before it works.
I tested the 2.8.7.0 version from miui.com and touch screen worked immediately. I'm not sure if it was just lucky or not, because I only tested it once. Maybe worth trying it and see how it works?
It'd weird because the one I have some times freezes and some times doesn't
b3ava said:
Thanks for the guide but I found something wierd happening. After succesfully flashing twrp and rebooting it goes in twrp when I restart after that and try to go in recovery with volume up +power it takes me to stock recovery? Any ideas??:/
Click to expand...
Click to collapse
Just reflash TWRP then reboot to TWRP, it should ask you if you want to either use it as read only or allow modification, select allow modification. Hope that helps.
Yes with the modded version on xiaomi.eu the touch works!
Bazzu said:
Yes with the modded version on xiaomi.eu the touch works!
Click to expand...
Click to collapse
Hm, I can't seem to find it. Do you mind posting the link to it?
Flaxe said:
Hm, I can't seem to find it. Do you mind posting the link to it?
Click to expand...
Click to collapse
https://mega.nz/#!VB02nZhQ!Slu89_5CHV-5WnH3hBVNlrKB9uqZv-pS3Kmgmtmaw48
Sent from my Xiaomi-mi4c
If i've been useful > "Thanks" ^^
Bazzu said:
https://mega.nz/#!VB02nZhQ!Slu89_5CHV-5WnH3hBVNlrKB9uqZv-pS3Kmgmtmaw48
Sent from my Xiaomi-mi4c
If i've been useful > "Thanks" ^^
Click to expand...
Click to collapse
Yup, this version of TWRP 2.8.7.0 should be fine with touch problems, this one i'm using now.
Optimized Stock Rom for Shield Tablet
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
I was missing a stock based rom for this device. So I took the nvidia recovery image and made it a flashable zip for TWRP. You cannot use ota to update though, wait for the new version from here if you want to update.
Also, don't flash wrong zip on the wrong Shield Tablet. It's your own responsibilty
Features:
- Latest Stock Factory Image
- Zipaligned apps
- Nothing more
Download:
K1: https://www.androidfilehost.com/?w=files&flid=93930
Original (Wifi & LTE): https://www.androidfilehost.com/?w=files&flid=94437
Also flash blob file of the same version
Enjoy!!
What to do with the blob zip:
Code:
1. Extract blob file from zip
2. Flash blob in fastboot with: fastboot flash staging "name of blob file"
Yup, I vote for original Shield ROM! Thanks!
Nice! Vulcan API goodness!
Zip for the original Shield Tablet (untested):
https://www.androidfilehost.com/?fid=24591000424954195
Thanks for this!
Is there any possibility you remove the Kill-Switch for users who have kept their tablet what has had to be replaced? I guess the Tegra Ota service must be disabled
Thanks! Made backup, flashed rom zip, flashed twrp, su, Xposed, nomoreota, and kernel. Wiped cache and booted system. Looks good so far... Not much immediate difference but we shall see over time. Came from stock so I did not wipe data and all is well.
teachmeluv said:
Thanks for this!
Is there any possibility you remove the Kill-Switch for users who have kept their tablet what has had to be replaced? I guess the Tegra Ota service must be disabled
Click to expand...
Click to collapse
Its better to do that yourself. There are tutorials on how here in the devices forum
Sent from my XT1562 using XDA Labs
GtrCraft said:
Its better to do that yourself. There are tutorials on how here in the devices forum
Sent from my XT1562 using XDA Labs
Click to expand...
Click to collapse
Ok thank you. Previous post says something about the nomoreota file, I remember that one now.
Anyway is this ROM pre-rooted? And is the file for the original tablet compatible with all three versions of it?
So after a few hours this ROM is smoother, cooler and faster then stock... Guess I'll be keeping it for awhile.
teachmeluv said:
Ok thank you. Previous post says something about the nomoreota file, I remember that one now.
Anyway is this ROM pre-rooted? And is the file for the original tablet compatible with all three versions of it?
Click to expand...
Click to collapse
The rom is not prerooted, also I only downloaded the wifi image. So that's the version for the original tablet
ok so after unlocking and rooting, I installed the bliss rom, but realized none of the nvidia apps were there And besides my Phantom I want this tablet for that.
so I wiped and installed this one, ran the nomoreota zip and everything is back to normal, but, I'm not longer rooted.
I just want this rom and rooted. I have twrp recovery and it works fine, but still not rooted.
anyhelp? thanks
Hello,
I tried to install K1 version using twrp, but i'm getting a blkdiscard failed: Invald argement,updater process ended with error 7. Image doesnot get installed.
Any ideas?
Regards,
Good Good! Working fine!!.Thanks.
fastfed said:
ok so after unlocking and rooting, I installed the bliss rom, but realized none of the nvidia apps were there And besides my Phantom I want this tablet for that.
so I wiped and installed this one, ran the nomoreota zip and everything is back to normal, but, I'm not longer rooted.
I just want this rom and rooted. I have twrp recovery and it works fine, but still not rooted.
anyhelp? thanks
Click to expand...
Click to collapse
Flash the latest su.zip in twrp.
rampa99 said:
Hello,
I tried to install K1 version using twrp, but i'm getting a blkdiscard failed: Invald argement,updater process ended with error 7. Image doesnot get installed.
Any ideas?
Regards,
Click to expand...
Click to collapse
Be sure to have the latest twrp and bootloader for K1
GtrCraft said:
Tell me if you guys want the same zip for the original shield tablet. Or a version without zipaligned apps
Click to expand...
Click to collapse
any chance for original 32GB European LTE flashable version, please?
SnowiiSnowii said:
any chance for original 32GB European LTE flashable version, please?
Click to expand...
Click to collapse
which recovery image is that?
That'd be LTE RoW 4.2... thank you!
SnowiiSnowii said:
That'd be LTE RoW 4.2... thank you!
Click to expand...
Click to collapse
Here you go:
https://www.androidfilehost.com/?fid=24591000424955372