Alpha preview, not intended for daily use!
Source: https://github.com/nadlabak
Downloads:
Nightly builds: http://skrilax.droid-developers.org/cm10nightly/umts_sholes/
Gapps: http://d-h.st/05j
OpenRecovery 2ndbootOR: http://code.google.com/p/cyanogenmod4milestone/downloads/detail?name=OpenRecovery_2ndbootOR_v1_1.zip
Notes:
JellyBean is very big, therefore ext partition on SD card is required - part of the system and most of the gapps is installed there.
You can find instructions on how to resize fat and create ext partition directly in OpenRecovery in this very fine guide by pontomedon:
Full guide from stock Motorola Android to CyanogenMod 7 for Milestone
Please use 2ndboot based OpenRecovery for installation to avoid sdcard write errors.
The CM10 builds are using 2ndboot to run custom kernel.
Thanks to Skrilax_CZ, the issue of low performance before the first device suspend has been resolved (L2 cache remained disabled before).
The bad GPU performance on CPU clock bellow 600MHz is currently successfully worked around by temporary insmod of older pvr driver
during boot, so it's not an issue anymore (from the user perspective) has been properly fixed by Skrilax_CZ.
Wifi tethering should work since 20121028 nightly.
Other known issues:
- video recording is not working very well currently
HW acceleration increases the application's RAM demands. You can use the included HWA Settings app to disable it per app.
Remember that JellyBean is designed for devices with much bigger RAM than Milestone has. Don't expect miracles .
It really deserved a thread.
You made an incredible job, sir!
JB on the old Milestone, and it is usable as a daily driver. :good:
kabaldan said:
Alpha preview, not intended for daily use!
Source: https://github.com/nadlabak
Downloads:
Nightly builds: http://skrilax.droid-developers.org/cm10nightly/umts_sholes/
Gapps: http://d-h.st/rkk
OpenRecovery 2ndbootOR: http://code.google.com/p/cyanogenmod4milestone/downloads/detail?name=OpenRecovery_2ndbootOR_v1_0.zip
Notes:
JellyBean is very big, therefore ext partition on SD card is required - part of the system and most of the gapps is installed there.
You can find instructions on how to resize fat and create ext partition directly in OpenRecovery in this very fine guide by pontomedon:
Full guide from stock Motorola Android to CyanogenMod 7 for Milestone
Please use 2ndboot based OpenRecovery for installation to avoid sdcard write errors.
The CM10 builds are using 2ndboot to run custom kernel.
Unfortunately, because of yet unknown reason, the device performance is limited until the phone first enters a deep sleep after 2ndboot.
This issue will be hopefully fixed some day.
Other known issues:
- video recording is not working very well currently
HW acceleration increases application's RAM demands. You can use the included HWA Settings app to disable it per app.
Remember that JellyBean is designed for devices with much bigger RAM than Milestone has. Don't expect miracles .
Click to expand...
Click to collapse
Amazing that development still is being made for a device this old! :good: but what about making a cm9 build with 2ndboot ? as jellybean from my experince demands much more resources then ics
With swap even Chrome browser works now - incredible!
After flash this cm10 build , my gallery and music player can't see any images or music , although i had try to remount my sd card , how can i fix it ?
Which rom you used previously?
In case you upgraded from any different from CM10, you should make a full wipe. (data,cache,dalvik-cache)
Do you have ext partition on your sd card? It is necessary to use this rom.
hello. how long it takes after the first boot to run. Sorry for my English. thanks
Eiertschik said:
With swap even Chrome browser works now - incredible!
Click to expand...
Click to collapse
Do you have both swap and compcache activated at the same time?
Can´t believe it´s finally, here, amazing work!! :good:
max_avatar said:
hello. how long it takes after the first boot to run. Sorry for my English. thanks
Click to expand...
Click to collapse
almost 15 mins for first boot
The build from yesterday boots within a few minutes for me.
Skrilax_CZ has fixed the sluggishness after boot!
Another problem solved.
I have had a lot of trouble trying to partition my SD card so is there a easy fool proof way of doing it? I have a 16GB sdcard..
naeem123 said:
I have had a lot of trouble trying to partition my SD card so is there a easy fool proof way of doing it? I have a 16GB sdcard..
Click to expand...
Click to collapse
What trouble? That is usally a straitforward process, especially with the modern GUI tools.
And how it's working? Any errors that would make it unsuable as a daily rom?
_crAss_ said:
Do you have both swap and compcache activated at the same time?
Click to expand...
Click to collapse
No - just swap
64MB partition, mounted with Swapper2, swappiness default (10, iirc)
Super laggy for me, even after deep sleep :/ Excellent work though!
Its been great so far, this rom works like a charm, pitty it doent show all internal ram available with 1GB extra on the SDCard.
Attention everyone!
As you may know or not know, Skrillax_CZ has found out what caused the lag before the first deep sleep.
The latest nightly (10.18) already contains the fix, so i suggest everyone to upgrade.
Works like charm for me, no lag even after the first boot.
Work perfectly!!!
Just to confirm that, the ver 18/10 works so well on my milestone without any errors... What I have done for my phone is as follow:
- Flash back to stock ROM 2.1.1
- Completely format the SD card
- Use the 2nd boot OP to root the phone
- Partition the SD card again
- Flash directly from 2.1.1 to CM10 ver 17/10, and then 18/10...
Work perfectly even with big app like Chrome, G+, Google now, etc...
Here are some screenshots... Again, credit gives to kabaldan. Million thanks to him for great effort for our milestone community...:good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
A.I.B. v0.3 Cataclysm with CM Power Widgets
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello everyone, behind Cataclysm there's a lot of work, every single detail is there on purpose, i hope you enjoy my work.
Features:
- Reodex only.
- Cyanogen Power Control on notification bar: you can use up to 12 widget to handle many functions of your phone, directly, no popups.
- Smart update of system apps: On boot every update get pushed into system apps and get reodex for performance increase and better cache / space management.
- New cache optimization and management.
- Preconfigured taskkiller for memory optimization.: Android management is not enough with the few memory ideos has.
- Facebook Contact pic sync with no loops and no decrease performance
- Governor Smartass optimized for battery saving and performance.
- 165 mb free internal memory at boot.
- Ability to use Link2SD without a second partition.
- Multitouch
- Kernel Underclock/Overclock 30-->750
- Ext3, Ext4, Cifs, OpenVPN Support
- Transparent Widgets
- Many tweaks and fixes: Malware patch, Time fix, Bugreport fix, Zipaligned, Bash support, Updated host, Apn, Short operator names, SD boost, Kernel tweaks, Memory tweaks, and many others.
Instructions CM Power Widgets:
Defaults widgets are : Autorotate Bluetooth Brightness GPS MobileData and Wifi.
You can have up to 6 widget at same time choosen from 12:
Airplane AutoRotate Bluetooth Brightness GPS LockScreen MobileData ScreenTimeout SleepMode Sound Sync Wifi
Inside /system you'll find a file named cataclysm-nw.txt, edit it and modify it as you wish. Make sure to not change the text format.
The options are:
Code:
toggleAirplane
toggleAutoRotate
toggleBluetooth
toggleBrightness
toggleGPS
toggleLockScreen
toggleMobileData
toggleScreenTimeout
toggleSleepMode
toggleSound
toggleSync
toggleWifi
If you change it directly on your phone remember to reboot.
Alternatively you can use the app made from bimbomix72 to configure it.
Instruction Link2VFS:
If you wish to use Link2SD without a second partition download one of the files below and unzip it on the root of your SD card. Reboot and use Link2SD normally.
**256 MB** **512 MB** **1GB** **2GB**
Download:
Cataclysm 0.3
MD5: 38d44554f2484c6fb549ebb504c63986
SHA1:eaa612f28113ae3c0d07b27cbe14aae43222e31b
If you like this rom don't forget to "thanks" me :>
Additional Packages:
Original Froyo Font
No Bootlog
ICS GenieWidget ( news and meteo )
Set CM PowerWidget App
Notes:
To make widget works had to change many lines of code inside many system files, including framework; long story short: you can't change the theme of this rom, if you don't like it choose another one, also don't ask for any theme related change.
Credits:
tj_style: Kernel MultiTouch Patch
EP690D: U8180 stock rom
CyanogenMod Team: Power Control Widget
JsChiSurf: PWC per Sense.
:mmm:
sounz promising ^^
will take it for a spin once I get tired of playing w/ current ROM ;-)
regards,
Does this ROM support swap?
update fix on homepage, hf.
Looks good, might give it a try after I try the 0.9 version of DJDroid.
Plz keep updating this page as well, i think most users can't understand italian.
added new version.
Now you can use link2sd without second partition
added new freq, modded governor and many other stuff.. check changelog on first page
worth to try! thanks atl4ntis!
i have ext4 partition on my sdcard... but when i use link2sd it said that ext4 is not supported on this device... is it true?
also it is rebooted when i choose freq to 748 on no frills cpu
af.wirapraja said:
i have ext4 partition on my sdcard... but when i use link2sd it said that ext4 is not supported on this device... is it true?
also it is rebooted when i choose freq to 748 on no frills cpu
Click to expand...
Click to collapse
added on main post a small patch to reenable ext4 and ipv6 ( needed by goggles )
apologize for any inconvenience this have caused
edit: if it reboots it's cause your cpu doesn't support that high freq, try to lower it , not every cpu supports it
thanks...
one more thing... i can't install gtalk... from market or .apk that i get from somewhere on this site... install it normally or push it via adb, it's not installed.
Hello, thanks for your feedbacks
Gtalk probably doesn't install cos the one you found isn't signed properly.
You could push it in system/app or sign it and adb install it normally.
If you still have any issue i'll upload it for you, just checked and it works normally.
atl4ntis said:
Hello, thanks for your feedbacks
Gtalk probably doesn't install cos the one you found isn't signed properly.
You could push it in system/app or sign it and adb install it normally.
If you still have any issue i'll upload it for you, just checked and it works normally.
Click to expand...
Click to collapse
i installed it from market... no success...
could you gimme link that can teach me how to sign an apk?
hello this is a nice read to learn how to sign an app:
http://developer.android.com/guide/publishing/app-signing.html.
I've uploaded for you and whoever needs an archive with all the latest Gapps missing in the rom plus some few other interesting apps. It's just an archive don't try to flash it via recovery. As for your problem, try the talk.apk inside it.
edit: Link on main page
Adobe flash!! Realy!!!possible!????
not yet man, it's on the "todo" list, i'm workin on it, it could work sometimes in the future or not, who knows. market works like a charm, so does link2vfs, so let's see what can we do with flash.
atl4ntis said:
not yet man, it's on the "todo" list, i'm workin on it, it could work sometimes in the future or not, who knows. market works like a charm, so does link2vfs, so let's see what can we do with flash.
Click to expand...
Click to collapse
You seem to take things way up the level...keep it up. Iam downloading ur rom...i knw dat armv6 has enuogh power to run flash maybe jst tweaks or mods! And wow over 4000video apps....amazing!
i'm not that crazy man i'm trying to make at least flash lite working, no chance for the full version as we got armv6 cpu, my goal is at least to have a chance to use those sites with small flash components, to buy a ticket, to check latest footbal scores, to play small games fx. Also tried few flash opensource but they just don't do the job.
Thank you for trying this rom
atl4ntis said:
i'm not that crazy man i'm trying to make at least flash lite working, no chance for the full version as we got armv6 cpu, my goal is at least to have a chance to use those sites with small flash components, to buy a ticket, to check latest footbal scores, to play small games fx. Also tried few flash opensource but they just don't do the job.
Thank you for trying this rom
Click to expand...
Click to collapse
Agree somethng better then nothng..btw iam not gting 4000 above apps in market for video????got like 2955 apps(stil more then ever b4 this i had like 2200 max!)
could be a country related issue, but the important thing is that you can see the high res app, the ones that needs a qvga++ res, like skyfire or icq, that's what the unlock in mainly meant for
Hello, Thanks for sharing the g apps ! i'll try to push it later since i'm using the device for wifi tethering
Anyway, this is such an incredible ROM! Three days using it on my c8150... incredibly fast and stable !
Sent from my Galaxy5 using XDA Premium App
Hallo, here is my personal cm7 build with GoLauncher as a default launcher!
Some screen shoots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://img542.imageshack.us/img542/2207/device20120119193045.png
http://img337.imageshack.us/img337/2295/device20120119193106.png
http://img846.imageshack.us/img846/5976/device20120119193123.png
http://img689.imageshack.us/img689/6895/device20120119193144.png
http://img823.imageshack.us/img823/3998/device20120119200616.png
What is needed if you want this on your device:
- phone need to be s-off + rooted
- you need recovery to install this
- you need to create 2 partitions on your sd card using an tool like "MiniTool Partition Wizard" (first partition need to be primary fat32 and seccond need to be primary ext4 (becouse I enabled apps2sd))! Do not create extended partition, all must be primary or instalation will be unsucesfull!!!
- install recovery and wipe everything using recovery (boot, sd-ext, cache, data, system)
- delete all android folders from your sd card and copy zip to sd card
- than install rom zip using recovery
After installing and runing your new rom:
- go to settings/aplication/all/google service framework and force stop + clear data!
- go to settings/aplication/all/settings and clear data!
- reboot!
What working:
- apps2sd enabled, cpu owerclock is default set to interactive|245min|806max
- video working, camera, camcorder, wifi, gps, bluetooth, data...
What not working:
- I don't know, please let me know
Kernel chagelog:
EDIT 20.Feb.2012:
- added nand partition (full nand size part) so you can dump whole nand
- enabled swap
- fixed lightsensor levels
- owerclocked video hw for better response
- some kernel fixes
- added cpu governors (SCARY, SAVAGEDZEN, SMARTASS and SMARTASS2)
EDIT 02.Mar.2012:
- reenabled interactive governor
- some changes in power management (now smallest battery drain!)
- 13 cpu frequencies (including 19mhz)
EDIT 09.Mar.2012:
- zram module added (will create init script in next update)
- genirq: pm: Fix the enable ordering in resume
How to install? Simple go to recovery, erase boot, flash boot_update.zip from attachment. Kernel is compatible with cm7! Please let me know how it working in your device!
Enjoy with CM7 + GoLauncher
Ahh some competition ehh? ;D
Sent from my SGH-I997 using XDA App
Sweet. I like options specially being that ive never tried go launcher. I'll have to try this out...a crazy thought......I wish somebody would whip up some kernel action. Just a thought for you devs out there.
Kernel is updated, see first post!
Anyone tried updated kernel?
I did. Installed over CM7.2 KANG 2012-02-20 build. I wanted to try Smartass and Smartass2 governors. No improved battery life noticed, but i'm too lazy to uninstall it and as no bugs discovered so far i currently live with this kernel
ext4 partition size?
munjeni said:
You need to create 2 partitions on your sd card using a tool like "MiniTool Partition Wizard" (first partition need to be primary fat32 and second need to be primary ext4 (because I enabled apps2sd))! Do not create extended partition, all must be primary or installation will be unsuccessful!!
Click to expand...
Click to collapse
Do you have a suggestion on how large to make the primary ext4 partition for apps2sd? Thanks.
How large? Its based on your needs!
New boot image updated... see changelog on first page!
So Im on the new nightly and would like to try your kernel. so do I format boot in recovery and flash the download? or cant I just wipe cache and dalvik then flash your boot_image file? thxs.
munjeni said:
How large? Its based on your needs!
New boot image updated... see changelog on first page!
Click to expand...
Click to collapse
source for kernel?
looking to renew my kernel (rebased but stuck, all on my git)
tommyguns818 said:
So Im on the new nightly and would like to try your kernel. so do I format boot in recovery and flash the download? or cant I just wipe cache and dalvik then flash your boot_image file? thxs.
Click to expand...
Click to collapse
just erase boot ad than flash zip, than reboot!
drowningchild said:
source for kernel?
looking to renew my kernel (rebased but stuck, all on my git)
Click to expand...
Click to collapse
initial repo from here -> https://github.com/CyanogenMod/htc-kernel-msm7227 and patch in attachment + files... maybe this changes will work better in your kernel? What battery current value is in sleep mode in your kernel?
Thxs....just to clarify, there is no clear boot option in CW. Sorry that im a knuckle head & not getting this. Just excited 2 try new kernel, munjeni. There's A format boot option so I tried that and flashed the zip and it boot looped. Never booted up. Back to my nandriod . Well hellooo Mr. Drowningchild!! Nice to see that your going to maybe implicate some cool changes in your kernel. Hope it works out.
tommyguns818 said:
Thxs....just to clarify, there is no clear boot option in CW. Sorry that im a knuckle head & not getting this. Just excited 2 try new kernel, munjeni. There's A format boot option so I tried that and flashed the zip and it boot looped. Never booted up. Back to my nandriod . Well hellooo Mr. Drowningchild!! Nice to see that your going to maybe implicate some cool changes in your kernel. Hope it works out.
Click to expand...
Click to collapse
ok, but its boot update for cm 7.2! If you want, maybe try to replace init.d folder from my aria cm build and try if it will boot? In any way I have plan to create new custom build with go launcher + latest cm7. Whats new in cm7 rc2 ?
Rc2 nightly? not much but I do wanna say that I'm loving your kernel. Running 128/806 MHz on smartassV2. I finally got rid off setcpu and finally have a phone that goes to sleep in screen off. Also no lag after an hour say when the phone rings from screen off. Currently on rc2 newest nightly.
Thanks dude, from your "plot" I see there is unused frequencies, for example 128mhz (i think some frequencies not exist!), 19mhz and 864 working but device sometimes rebooting phone so I will play with 19 and 864 (will try to see what frequency cause device reboot)....etc, but "sleep mode" is 70% good now (in a morning when I wakeup my device I seen 4mA battery current value so its good thing, device going to deep sleep mode!) but other 30% (for example when device go to sleep for 5 minutes, when I wake up device, current value is 50mA so it mean is not in deep sleep becouse some of "components" is not in sleep mode...etc... will try to fix that 30% things about...
In any way its better than before, battery drain in sleep mode after "night to morning" is about 5% of the capacity, so its very good
I have to say....i've totally ditched launcher pro for go launcher. after you set up go launcher.....yeah it takes a bit but its just like launcher pro but much more options. so its worth it. also, no more crappy reboots and have to force close LP. go launcher has some nifty widgets too with SUPPORT. i think the launcher pro dude took a long deep vacation. Gonna flash this ROM on my wifes being that i got her a new aria. . im a cheaP a$$. keep you guys posted.
Kernel updated, changelog is in first page
zram -doesnt- need to be build as a module, built in works fine for our device
and you shouldnt need a script for it there already is one, 'compcache' in /bin and cmsettings.
the only thing i see for a change there would be the swappiness, defaults to 30, which from what ive always seen was it was being unused
The only issue i am having is play market wont download or update apps. My mom and wife both on same wifi have no problems. Im not sure if its this rom or what. Other data works fine.
Sent from my Liberty using xda premium
Yes, its something about enabled apps2sd but problem fixed when you go to applications/all/google service framework/force stop/clean data/reboot
DianXin OS, ported from Nexus S Version:
Enhancements
4-Way Reboot MOD (thanks to roenano)
Spare Parts MOD (including nowhere near as much as previously, for now)
System Mods
Using Sandvold's ICS 4.0.3 Beta 0.3.9 as a base (thanks to Sandvold)
Camera partially working (a bit unstable) (thanks to rapmv78)
Hardware Acceleration hack (thanks to rapmv78, rmcc)
RAM Optimisation script (thanks to Juwe11)
Security modified so that superuser and permissions management works properly
Custom hosts file for blocking ad servers
CM7 APN’s for better network connectivity
LED & Flashlight permissions reverted for compatibility with more apps
Custom installer script (See MIUI_Au for an explanation)
LX-Data2Ext script added (my own). Requires an ext3 or ext4 partition as 2nd partition on SD Card.
Better GPS settings for Australian users.
Automatically adjusts installation for any HBOOT (All HBOOT other than Stock, Sense, or Data++ cannot perform data wipe without reflashing rom due to system partition size limitations)
Modified ramdisk to support native USB mounting as well as other small fixes
Modified framework to support USB mounting, network connection, signal display, and various other minor fixes
MIUI Torch included
Included Trackpad2Wake (thanks to samuaz)
Applications
Calendar Sync fixed
DeskClock mod fixed for MIUI Backup (thanks to Andrew Neal)
CM9 Music (thanks to Andrew Neal)
Exchange Sync fixed
Gmail with 3rd party app notification support
Changelog (2.2.5):
Initial release. Based on Sandvold 0.3.9 and DianXin 120113.
NOT WORKING
Camera can be unstable
FM Radio not included
Phone FC's once on boot, then fine after that.
Probably more
REQUIREMENTS
Requires an ext3/4 partition to be the second partition on your SD Card.
Will install on any HBOOT, and symlink system folders to /data if necessary
Only stock HBOOT, Data++ and Sense can perform data wipe without rom reinstallation, due to system files needing to be moved for other HBOOT's.
INSTALLATION
If you restore apps or data using Titanium or MIUI Backup, there may be problems due to changes from GB to ICS. If you do have any, restore apps one by one to find the culprit.
Make sure you have an ext3/4 partition setup as the second partition on your sd card, otherwise you will have very little memory to use as data2ext won’t work.
Please understand this is a very beta version, so expect errors.
There is no FM radio, so please don’t bother complaining.
Any errors, feel free to post but do not demand a solution.
Flash at your own risk.
If you experience any serious problems, we recommend you do a full wipe/factory reset then flash again.
SUPPORT INSTRUCTIONS
I will NOT be responding to any more posts about problems unless you can prove/state the following:
You have NOT restored any apps from a backup from a GB rom.
You have tried a full wipe/factory reset.
You have used google to try to find the answer yourself.
You have read the comments to see if the problem is already reported.
You have read the entire post and followed the instructions provided.
If the problem is related to apps FC’ing, you provide a logcat of the FATAL EXCEPTION.
If the problem is low memory, post the output of “df” and “mount” commands in terminal.
Do NOT ask for features/apps from MIUI GB to be included. They are when they are.
Any other reports, unless I deem them to be reasonable, will be ignored. Take no offence, but if I don’t answer (and trust me I’m very good at answering the questions promptly unless I’m asleep) it means you haven’t done the above, so read properly and try again.
Do NOT ask about any device other than the HTC Desire GSM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Version 2.2.5
MD5: C6700C15E577A9CE82E8064825580126
looks really good! i will test it..
Now that's what I'm talking about...
standing by in here buddy...
Hey guys, really sorry but I've tried uploading to Multiupload (MIUI_Au servers get flogged enough as it is) and twice its gotten to 100% and then frozen, leaving me with no URL. I will find an alternative tomorrow night, so unfortunately as I have work in 8 hours I do have to go to sleep and leave it till then. It'll be worth the wait I'm sure, been using it today as a break from MIUI and all seems to function well. In the meantime use MIUI_Au Stay tuned.
Side Note: Anyone who wants to offer a direct mirror I can upload to via ftp is more than welcome
Language
Sory, will russian language be suported in this rom?
This looks quite nice indeed.
I'm pretty sure it has all the languages the ASOP version has
android 2.3 version has only english and chinese, so...
Ill try. look nice
Please upload. I want to try it.
szubert51 said:
Please upload. I want to try it.
Click to expand...
Click to collapse
I've said I will tonight (allow ~12 hours from now and it should be up)
Rom uploaded, enjoy.
I will try and i record video review later
Here is video :
http://www.youtube.com/watch?v=R5hKNw8amSA&feature=youtu.be
Sorry for quality its recorded with webcam
Installed.
All is fine but LX-D2X makes my desire to respond very slowly when starting applications.
Do you plan to make it possible to those with slow sdcards (as me ) changing to PC-A2SD as in your previous scripts?
Thanks for your work.
I can't check right now but I thought I did? In control, under data2ext settings?
lenny_kano said:
I can't check right now but I thought I did? In control, under data2ext settings?
Click to expand...
Click to collapse
Control does not open. I tryed "control" looking for script settings...
Ah OK, it gives fc? If so I know why, and I'll try to update in the next couple of days.
For now, type the following in terminal for pc-a2sd:
app2ext pca2sd
Then reboot and it should have changed to pc-a2sd (app app-private dalvik on sd-ext) and run a bit smoother (maybe, dalvik on SD can cause problems especially with slow SD card). Other parameters are data2ext (app app-private data dalvik), data2int (all internal), a2sd (app app-private) and lxa2sd (app app-private data).
lenny_kano said:
Ah OK, it gives fc? If so I know why, and I'll try to update in the next couple of days.
For now, type the following in terminal for pc-a2sd:
app2ext pca2sd
Then reboot and it should have changed to pc-a2sd (app app-private dalvik on sd-ext) and run a bit smoother (maybe, dalvik on SD can cause problems especially with slow SD card). Other parameters are data2ext (app app-private data dalvik), data2int (all internal), a2sd (app app-private) and lxa2sd (app app-private data).
Click to expand...
Click to collapse
Yes, it gives fc.
The first command fixed the problem. Now it runs smooth.
One more question (sorry if it is obvious), how can I get led notifications work for whatsapp or gmail?
Thanks.
Try led me know or light flow. have been reports of them causing battery drain though.
lenny_kano said:
Rom uploaded, enjoy.
Click to expand...
Click to collapse
Thank you very much.
lenny_kano said:
Try led me know or light flow. have been reports of them causing battery drain though.
Click to expand...
Click to collapse
Thanks, I'll try.
FEEL FREE TO DONATE US FOR ALL WE'RE DOING FOR YOU!
Hey guys. This topic aims to be the right place for everyone to talk about every MoltenMotherBoard Team projects.
As in the other threads you can only talk about DEVELOPMENT related topics, we created another thread which contains every needed topic.
So, don't feel worthless, intrusive, stupid! Here're welcomed all kinds of questions, but they have to be related to the team and its projects!
----- Useful contacts:
Facebook
Twitter
----- Team components:
streambinder
d33pcode
ItachiSama
Do you want to report an issue? Do it here!
In order to do it, create a new issue, choosing correct labels corrisponding to: Device/OS which you're using, ROM/project you're on, kind of issue.
Also, please, be sure you're running the ROM/project in the exact way we've provided it to you (do not create issues if you're using different
kernel, mod, plugins and dependencies we didn't tell to use).
Hi MMB team,
Are you working on MMB tweaks ?
EddyGio said:
Hi MMB team,
Are you working on MMB tweaks ?
Click to expand...
Click to collapse
MMB-Tweaks landed the stable version so it's currently stopped, or better, completed.
If you wanna include some other tweaks or you noticed some issues, please let us know, so that we can work on it!
Hi!
When the AOSP RC3 it's released?
eskorpiao112 said:
Hi!
When the AOSP RC3 it's released?
Click to expand...
Click to collapse
Unfortunately without ItachiSama, the work is slower: we were given each other something to work on. And so on, I'm still working on the camcorder, I have a package ready to be tested with some updates on the camcorder / libstagefright.
Briefly, we don't know when RC3 will be available. If it's not a problem, I would wait for ItachiSama to end exams (Thursday, 28) and to focus on what he was going to fix.
Ergo, okay? Now you can find the current changelog in the AOSP thread: a few fixes and some implementation. If I include changes in the camcorder (still NOT WORKING) and libstagefright, still some implementation. If you're good, I can upload the RC3.
However, tomorrow will ItachiSama an exam, wish him good luck!
In the AOSP ics line you write
Not working:
* Static RIL strenght signal
Click to expand...
Click to collapse
What does it mean ?
EvilKing009 said:
In the AOSP ics line you write
What does it mean ?
Click to expand...
Click to collapse
That in statusbar, you've RIL signal stuck at two bars, next to battery icon.
init.d on AOSP ICS RC3
I did a fresh install of AOSP ICS 4.0.4 RC3, then installed init.d-supportenabler-test.zip and INT2EXTV2+ through recovery, and rebooted. The system booted, 'mount' through adb shell told me that my second SD partition had been mounted, apps list in settings told me that I had 65MB used and 0,92GB free in my memory, apps were installable alright. However, when I rebooted, there were no mounts and no installed apps.
I wiped data+cache and installed INT2EXT+. Apps are installable with it present, and the second SD partition is mounted during each boot.
So, the init.d-supportenabler patch works.
Sorry for not posting in the development thread, I have not got any posts here yet.
Rax Garfield said:
I did a fresh install of AOSP ICS 4.0.4 RC3, then installed init.d-supportenabler-test.zip and INT2EXTV2+ through recovery, and rebooted. The system booted, 'mount' through adb shell told me that my second SD partition had been mounted, apps list in settings told me that I had 65MB used and 0,92GB free in my memory, apps were installable alright. However, when I rebooted, there were no mounts and no installed apps.
I wiped data+cache and installed INT2EXT+. Apps are installable with it present, and the second SD partition is mounted during each boot.
So, the init.d-supportenabler patch works.
Sorry for not posting in the development thread, I have not got any posts here yet.
Click to expand...
Click to collapse
Perfect. We'll include it in next release by default so that you shouldn't have any problem.
Sent from my GT-S5660 using xda app-developers app
BUGFREE ICS. Release tomorrow!
mackief said:
BUGFREE ICS. Release tomorrow!
Click to expand...
Click to collapse
Cheeers!!! Can't wait((((
hey mmb team,
whats project will work on after your bug free ics/cm7?:angel:
will you give aosp 4.2 to us:laugh:
thanks
044003
044003 said:
hey mmb team,
whats project will work on after your bug free ics/cm7?:angel:
will you give aosp 4.2 to us:laugh:
thanks
044003
Click to expand...
Click to collapse
You'll know that when we'll finish ICS and CM7!
Swap /data and /system
There was a proposal of swapping /data and /system to gain more data space in DebianDroid. I think this can be achieved through applying persistent changes to init.rc, where you have to swap mount points. Install scrips will also require mountpoint changes. [Just a guess, may work or not]
I already foresee problems with Recoveries, which are going to mount new /system as /data and reverse (according to their built-in default values), do wrong wipes etc.
Rax Garfield said:
There was a proposal of swapping /data and /system to gain more data space in DebianDroid. I think this can be achieved through applying persistent changes to init.rc, where you have to swap mount points. Install scrips will also require mountpoint changes. [Just a guess, may work or not]
I already foresee problems with Recoveries, which are going to mount new /system as /data and reverse (according to their built-in default values), do wrong wipes etc.
Click to expand...
Click to collapse
Will work on this feature as soon as we'll have a fully stable build! Thanks for the info!
Bluetooth kills RC4 but works on RC3
ItachiSama asks to confirm if Bluetooth file receiving works on AOSP ICS RC3 — yes it does, just checked.
___
There is a locale bug on the first boot: notifications about USB ('USB connected' and 'USB debugging connected') remain English no matter what language I set during the initial setup. A reboot, and ...well I get into a bootlop: it seems turning Bluetooth on is fatal for RC4 (always ran into this behavior when I enabled Bluetooth on RC4).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rax Garfield said:
ItachiSama asks to confirm if Bluetooth file receiving works on AOSP ICS RC3 — yes it does, just checked.
___
There is a locale bug on the first boot: notifications about USB ('USB connected' and 'USB debugging connected') remain English no matter what language I set during the initial setup. A reboot, and ...well I get into a bootlop: it seems turning Bluetooth on is fatal for RC4 (always ran into this behavior when I enabled Bluetooth on RC4).
View attachment 1829693
Click to expand...
Click to collapse
Have you checked if you can receive files with Bluetooth in RC3? Thanks for reporting.
mackief said:
Have you checked if you can receive files with Bluetooth in RC3? Thanks for reporting.
Click to expand...
Click to collapse
Yes, I can, that is exactly what I wrote in the beginning of my last post.
Rax Garfield said:
Yes, I can, that is exactly what I wrote in the beginning of my last post.
Click to expand...
Click to collapse
Ok, I just wanted to be sure.
Thanjs again, tomorrow me and ItachiSama will work on it!
i stuck in samsung logo, after flashing
i did this step
1.wipe data
2.wipe cache
3.wipe dalvik cache
4.flash update zip
5.reboot system
before flash this rom, i use cm7 itachi
DISCLAIMER
All guides and informations shared on this page are purely based on my own personal experiences.
I cannot guarantee that these informations are 100% correct, there is a chance that some of the info is inaccurate/wrong,
but i can assure you all these guides have been personally tested and proven working from my repeated trials and tests.
Though, i cannot promise that these tricks will work on your device, nor won't brick your device, there is always a risk.
I will NOT be responsible for any loss or damage caused, or alleged to have been caused, directly or indirectly,
by the informations or ideas suggested or referenced, including but not limited to links and files provided on this thread.
Please try at your own risk. Your warranty is now void.
I proudly presents to you Kitkat for all X7!
Rom fully build from source and ready for everyday use! Multilang, see screenshots
Rom does not contain google apps and root. You can install it yourself.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Known bugs:front camera 2Mpx, at some X7 front camera not work. ART not working now, it's Mediatek bug
Current release 1.08 for youth/turbo and 1.03 for plus/elite
Download links:
Youth
Elite
Addons:
Kernel witn initd support, not recommended for 1.08 and 1.03 version!, thanks to danhii
gapps and superuser, thanks to tinyXperia
Changelog for all X7:
1. Fully odexed for speed and stability
2. New battery driver
3. Minor bug fixes
How to install:
You should use TWRP recovery from me
Download link for recovery
Copy rom to sd card, reboot recovery. Then choose install, select rom zip file. Wipe dalvik and data after fist installation. If you perfom upgrade just wipe dalvic cache
Good Work
Thanks for sharing!!
but only problem i have is the battery that's not giving correct information. Anyway great work done!!!!
edit1: google play store gives me a FC
edit2: play store solved just reinstalled the gapps.
Schumi_wk said:
Thanks for sharing!!
but only problem i have is the battery that's not giving correct information. Anyway great work done!!!!
Click to expand...
Click to collapse
will be fixed soon
Thank you for your hard work! I will definately enjoy this
Here's gapps and superuser that was included when @vo-1 posted this on needrom.com
(I'll be happy to remove this on your request)
https://www.androidfilehost.com/?fid=95747613655040801
NOTE: unzip the file you download, the zips inside can be flashed in recovery (so it's superuser and gapps seperately)
Awesome job and awesome rom vo-1..!!
спасибо!:victory:
Youth version reuploaded, battery fixed!
I am having problems with this rom, i have followed the development of this rom, i have flashed multiple versions of the youth rom, and the elite version.
Sometimes at the first boot, it would say "phone memory corrupted, please format"
And sometimes, after a while of using it, it would suddenly freeze, or show a black screen, and if i then pull the battery to make it respond, the whole phone would have reset itself to a few days ago, meaning i lost installed apps of the past few days, whatsapp chat history, pictures taken which are on my sd card!
If anyone could help me fix this problem it would be greatly appreciated!
Theelichtje said:
I am having problems with this rom, i have followed the development of this rom, i have flashed multiple versions of the youth rom, and the elite version.
Sometimes at the first boot, it would say "phone memory corrupted, please format"
And sometimes, after a while of using it, it would suddenly freeze, or show a black screen, and if i then pull the battery to make it respond, the whole phone would have reset itself to a few days ago, meaning i lost installed apps of the past few days, whatsapp chat history, pictures taken which are on my sd card!
If anyone could help me fix this problem it would be greatly appreciated!
Click to expand...
Click to collapse
first of all format your phone memory. if it not help, go to service, your internal memory is ready to die
Anyone who can help, my power button isn't working properly and there seems to be a way to start the screen with the + and - buttons, but i can't seem to make it work.
Schumi_wk said:
Anyone who can help, my power button isn't working properly and there seems to be a way to start the screen with the + and - buttons, but i can't seem to make it work.
Click to expand...
Click to collapse
Do a bypass unmounting phone, it's only way
a tutorial or something like that, dunno what you are talking about tbh.
Coloros worked with the volume buttons
Edit: I found a tutorial that explains how to do it, but my skills don't go that far to compile it.
https://translate.googleusercontent.com/translate_c?depth=1&hl=nl&rurl=translate.google.be&sl=zh-CN&tl=en&u=http://www.jlrom.cn/493.html&usg=ALkJrhgA4NtDRK4JPybGpp0F3NNe7k5l0w
vo-1 is it possible to support init.d? Maybe we can get more performance with some tweaks, what do you think about?:fingers-crossed:
---------- Post added at 10:45 AM ---------- Previous post was at 10:39 AM ----------
Schumi_wk said:
a tutorial or something like that, dunno what you are talking about tbh.
Coloros worked with the volume buttons
Edit: I found a tutorial that explains how to do it, but my skills don't go that far to compile it.
https://translate.googleusercontent.com/translate_c?depth=1&hl=nl&rurl=translate.google.be&sl=zh-CN&tl=en&u=http://www.jlrom.cn/493.html&usg=ALkJrhgA4NtDRK4JPybGpp0F3NNe7k5l0w
Click to expand...
Click to collapse
oh! sorry I understand that you want to turn on phone withouth power button..!
Yes you can do it easily with GravityBox, test it if you don't know how to do, I'll help you do it, ok?:good:
I've tried it but it doesn't seems to work the volume rocker, tried some other xposed apps but nothing seems to do the job.
danhii said:
vo-1 is it possible to support init.d? Maybe we can get more performance with some tweaks, what do you think about?
Click to expand...
Click to collapse
yes. just repack kernel and edit init.rc
vo-1 said:
first of all format your phone memory. if it not help, go to service, your internal memory is ready to die
Click to expand...
Click to collapse
Thanks for the reply, i have formatted the phone memory multiple times already before flashing.. and when i am on jelly bean (which i am now) everything works just fine. Could it be something with the flashing of Gapps or Superuser?
Theelichtje said:
Thanks for the reply, i have formatted the phone memory multiple times already before flashing.. and when i am on jelly bean (which i am now) everything works just fine. Could it be something with the flashing of Gapps or Superuser?
Click to expand...
Click to collapse
No. I'm using my rom 1 month and everything works well
vo-1 said:
yes. just repack kernel and edit init.rc
Click to expand...
Click to collapse
Could yourself do it as you have kernel? (if you want) or where I can download it for change it an repack it myself? Is only add this line " exec /system/bin/sysinit"
danhii said:
Could yourself do it as you have kernel? (if you want) or where I can download it for change it an repack it myself? Is only add this line " exec /system/bin/sysinit"
Click to expand...
Click to collapse
i will give you manual later