I keep thinking I read a post by someone saying this was possible at some point but if they did, I can't seem to find it by searching. Is there a way to try and force the phone to connect to LTE connections only? I can't find anything obvious in the settings to do this if so...CDMA only certainly. Seems like though if I'm remembering right it might have been in one of the dialer menu settings?
PythonFanTN said:
I keep thinking I read a post by someone saying this was possible at some point but if they did, I can't seem to find it by searching. Is there a way to try and force the phone to connect to LTE connections only? I can't find anything obvious in the settings to do this if so...CDMA only certainly. Seems like though if I'm remembering right it might have been in one of the dialer menu settings?
Click to expand...
Click to collapse
Go into Phone, dial *#*#4636#*#*, then go into phone information, slide to the bottom, and there will be an option for "LTE Only"
Don't have that option here....when I go into that menu I see:
Phone information
Battery information
Usage statistics
Wi-Fi information
Motorola Services
That's it.
PythonFanTN said:
Don't have that option here....when I go into that menu I see:
Phone information
Battery information
Usage statistics
Wi-Fi information
Motorola Services
That's it.
Click to expand...
Click to collapse
zodiac12345 said:
Go into Phone, dial *#*#4636#*#*, then go into phone information, slide to the bottom, and there will be an option for "LTE Only"
Click to expand...
Click to collapse
Did you miss the body of my post?
Ok I see it now, I went into all the submenus earlier but didn't see it originally. Its not all the way at the bottom of Phone Info, it's about 2/3rds of the way down cramped between a couple of buttons that it sits above, and underneath the title header 'Set preferred network type', just for anyone else that may be looking for this.
PythonFanTN said:
Ok I see it now, I went into all the submenus earlier but didn't see it originally. Its not all the way at the bottom of Phone Info, it's about 2/3rds of the way down cramped between a couple of buttons that it sits above, and underneath the title header 'Set preferred network type', just for anyone else that may be looking for this.
Click to expand...
Click to collapse
Can you confirm that this works?
whitelightnin3006 said:
Can you confirm that this works?
Click to expand...
Click to collapse
I can confirm that you can toggle it back and forth, but I can't confirm it works in the purest sense because thus far there's no LTE in my area unfortunately.
When I originally posted inquiring about this was the night before I headed back home from PA and had hoped I'd be able to use the ability to to do some more fully-fleshed out Sensorly mapping rather than constantly having to toggle airplane mode on and off, but I didn't get the answer until I was back home.
Now that i am home i can confirm this does work. Thanks again zodiac!
Related
So I`m new here and if my thread is not on the right place - sorry. And here it is my problem:
I`m using Widgetsoid Switcher Widget and have this very annoying problem that when i turn on something it not works (For example: I turn on my data service, widget indicates that it`s turned on but actually it's not. If I turned it on from the Settings menu the widget indicates it`s turned on and when I stop it from the widget it doesn`t stop). Same with WiFi and GPS... This thing is freaking me out so if somebody can help me it would be great or if you can tell me other app like that one with options for customization. Thanks in advance
Can`t somebody help me?
podmatrix said:
Can`t somebody help me?
Click to expand...
Click to collapse
Hi,
Try to uninstall, install and reboot directly after install (it's important!).
After go to global preferences and check "Disable all apn"
Create your widgets and it will be ok.
Now everythings is fine but Data Service still doesnt't work... Any ideas?
data toggle help
i had the same problem with the data/3g toggle on my htc evo. what you have to do is go to "settings->wireless & networks->then scroll down and make sure there is a check mark in the "mobile network" setting" in order for the widget to control it the setting must first be enabled. it took me and the dev 3 days to find this out.
also if that doesn't work go into the app itself and as soon as it opens it you should see something at the top that says data toggle mode. make sure that setting is set to "APN toggle" and not "APN rename"
hope this helps. remember to rep if it did
Thanks man
No problem
Sent from my PC36100 using XDA App
I had a similar problem today, it looks like the data switch in Widgetsoid places a dash in front of your AccessPoint name in order to block data transfer and removes that dash when you click switch again.
After messing with Widget I was not able to connect to net, I installed, uninstalled, etc, and then I noticed that APN list was empty, I had to add the APN again and restart it, I think (as said above) that you need the data to be ON then do a restart in order for Widgetsoid to properly read the status.
If you're rooted, use the new "root method" to toggle data. It doesn't mess with your APN & it works flawlessly for me. It's the first time I've had a data toggle that actually works.
A simple method
FIX = Settings>Location & Security>Select Device Administrators> *Uncheck Widgetsoid
Uninstalled
Thanks to: mr.noobsalot
I know this is an old thread, but where is the global preferences on version 3.4.1 it doesnt appear when I click apply.
Im using a HTC sensation and ICS.
Thanks
bump
euqiddis said:
bump
Click to expand...
Click to collapse
Stay FAR away from Widgetsoid. It can slow a Galaxy S5 down to a Crawl. Your Dialer will not function, Your phone will not respond. Its trying to load your phone with Ads or something and keeps your CPU busy, whether its a dual core or quad doesn't matter. Developer does not respond and does not seem to care. After uninstalling this App, the phone feels "new" again.
I believe this app is some type of Spyware/Malware combo. Why does it need access to my Contacts? Something very fishy and the developer never responds. It's a great Widget when it works but certain things about it don't seem right. Uninstalled!
I use the Hidden Menu to adjust the LED brightness, but I don't really know anything else about the many things in it. I was looking at the various tests and checking them out today and noticed something weird. When I did the Gyro Cal Test (in Device Test just above the LED brightness one), I got "Functional Test Result: FAIL" as the result. That doesn't sound good.
Can anyone try that test and see if something is wrong with my phone or if the G2x is supposed to fail that test.
I don't know if my device has always failed that test or, if not, when it started. The only thing that is wrong with my phone is that the screen doesn't come back on after the proximity sensor turns it off during a call. Either the other person ends the call or I have to pull the battery. If you know how to fix that, I'm all ears! [I'm running Tsugi with stock kernel.]
And speaking of the Hidden Menu, does anybody know anything else useful in it other than the LED brightness adjustment?
lobsterhead said:
I use the Hidden Menu to adjust the LED brightness, but I don't really know anything else about the many things in it. I was looking at the various tests and checking them out today and noticed something weird. When I did the Gyro Cal Test (in Device Test just above the LED brightness one), I got "Functional Test Result: FAIL" as the result. That doesn't sound good.
Can anyone try that test and see if something is wrong with my phone or if the G2x is supposed to fail that test.
I don't know if my device has always failed that test or, if not, when it started. The only thing that is wrong with my phone is that the screen doesn't come back on after the proximity sensor turns it off during a call. Either the other person ends the call or I have to pull the battery. If you know how to fix that, I'm all ears! [I'm running Tsugi with stock kernel.]
And speaking of the Hidden Menu, does anybody know anything else useful in it other than the LED brightness adjustment?
Click to expand...
Click to collapse
Not all items in the Hidden Menu have to do with the G2x, example FM Radio Test. I get the same results with the Gyro Cal Test.
GTWalling said:
Not all items in the Hidden Menu have to do with the G2x, example FM Radio Test. I get the same results with the Gyro Cal Test.
Click to expand...
Click to collapse
Do you know of anything that is useful in the Hidden Menu or is it all just tests to make sure something is on or not?
Call me crazy, but what it's this hidden menu and how do I access it?
Sent from my LG-P999 using xda premium
F0rgiven said:
Call me crazy, but what it's this hidden menu and how do I access it?
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Here are two ways of getting to it here.
It's got a bunch of tests for your phone. I've never heard of any major uses for it other than what I do with it, which is adjust the "Touch LED Brightness." I like to turn them down.
You can also set some parameters that are used for GPS; in particular, some people have reported significant speedups by using the Google SUPL server instead of one of the three that are available in the stock ROM.
wmm said:
You can also set some parameters that are used for GPS; in particular, some people have reported significant speedups by using the Google SUPL server instead of one of the three that are available in the stock ROM.
Click to expand...
Click to collapse
Where can I choose to use Google SUPL? It's not listed on mine. Only T-Mobile, Spirent, and LGE SUPL. The T-Mobile one was chosen by default on mine. Do you know what is meant by "Use XTRAS" in the same sub-menu?
Yes, those are the three I mentioned that are available in the stock ROM. You have to add the Google SUPL server before you can select it. If you go to the SLP Server Setting screen and hit the menu button, you'll get the choices Add, Edit, and Delete. Hit Add and set "name" to Google, "slp address" to supl.google.com, "port" to 7276, and "certification file" to /etc/SuplRootCert. Leave "TLS Setting" unchecked. Hit the menu button and then Save. You should then have a Google entry you can select. I'm not sure about "Use XTRAS", but mine is checked.
wmm said:
Yes, those are the three I mentioned that are available in the stock ROM. You have to add the Google SUPL server before you can select it. If you go to the SLP Server Setting screen and hit the menu button, you'll get the choices Add, Edit, and Delete. Hit Add and set "name" to Google, "slp address" to supl.google.com, "port" to 7276, and "certification file" to /etc/SuplRootCert. Leave "TLS Setting" unchecked. Hit the menu button and then Save. You should then have a Google entry you can select. I'm not sure about "Use XTRAS", but mine is checked.
Click to expand...
Click to collapse
Awesome! And you say this will help with GPS? Do you know what it does/how it works differently? Do you use the Google one? Maybe that makes XTRAS become checked because currently mine is unchecked. It is listed as "Disabled."
I do use the Google server, but it's not clear to me whether it helps or not because my TTFF is not great (but not terrible) and varies a lot. Some people have reported that it gives a big improvement. I don't know what the difference might be other than possibly increased bandwidth or decreased latency when downloading the AGPS data. I don't know what the story is with XTRAS. Sorry I can't help more; you can find several threads here referring to the Google SUPL server.
I have searched through our forum and found some members with similar issues and maybe some with the same issue but I don't think they have been resolved. Then there are a few reporting everything is working beautifully. I am on Synergy 1.7 r68 and leankernel v0.6. I can make the device respond to commands for the camera and music player but not the phone. Am I missing one of those check boxes somewhere? I feel like I have looked everywhere and am missing something simple. I thought it may be Google Now instead of stock search? I don't use it a lot (yet, still trying to work out if it is going to be useful to me) and at this point would replace it to have this functionality. Any Ideas?
Not exactly sure what your trying to get the command for, but tap Google Now where you would talk to device tap menu/settings and scroll thru that and see maybe you don't have everything enabled.
galchristian said:
Not exactly sure what your trying to get the command for, but tap Google Now where you would talk to device tap menu/settings and scroll thru that and see maybe you don't have everything enabled.
Click to expand...
Click to collapse
Thanks! I poked around in there already but I looked again, not what I am looking for. Specifically, it is the "answer" and "reject" command.
chip.hughes said:
Thanks! I poked around in there already but I looked again, not what I am looking for. Specifically, it is the "answer" and "reject" command.
Click to expand...
Click to collapse
I think those settings will be enabled after You agree to the S-voice's EULA (EndUserLicenseAgreement)
I believe mine started working after I played with "S-voice" for a bit and agreed to their services. But I just looked in there I didn't see any settings like that. You could still try tho
Open Google now (or search if you have the "now" option disabled), press menu key, go to settings, go to phone search, be sure contacts is checked. Check all your voice settings in the phones main settings menu too under language and input. If that doesn't work, update your rom nightly, I'm on r71 with no Now issues that stand out.
Sent from my SCH-I535 using xda premium
Is there any known way to disable the CONSTANT notifications indicating that "WiFi Networks Are Available" or "You are Connected to [network name]"? These notifications are completely useless, because when are there ever not WiFi networks available? I also don't need a notification that I've connected to a trusted network... there is a WiFi icon for that exact purpose. Driving me nuts!
I just switched to the M8 after having a Galaxy Nexus running AOSP. On the Gnex, you could easily disable these notifications in the Advanced menu under WiFi settings. Did Verizon remove this ability for some reason?
they removed it a while back to encourage people to use wifi instead of 3/4g. As soon as we get s-off customs roms will start pouring in and they will definitely have the notification of.
btw, i'm thinking of moving from my gnex to the m8, what are your thoughts on the comparison? are you happy with the m8?
David 617 said:
they removed it a while back to encourage people to use wifi instead of 3/4g. As soon as we get s-off customs roms will start pouring in and they will definitely have the notification of.
btw, i'm thinking of moving from my gnex to the m8, what are your thoughts on the comparison? are you happy with the m8?
Click to expand...
Click to collapse
Well, this notification is "encouraging" me to just turn off WiFi altogether and just use my unlimited data plan full-time!
So far I like the M8. Sense interface definitely has a learning curve, but it does have a few nice added features like motion gestures. The M8 is lightning fast compared to the GNex!
bjamerican said:
Well, this notification is "encouraging" me to just turn off WiFi altogether and just use my unlimited data plan full-time!
So far I like the M8. Sense interface definitely has a learning curve, but it does have a few nice added features like motion gestures. The M8 is lightning fast compared to the GNex!
Click to expand...
Click to collapse
nice.
this should fix the notification problems. http://forum.xda-developers.com/showthread.php?t=1761900
---------- Post added at 10:32 PM ---------- Previous post was at 10:13 PM ----------
found the setting - http://dl.xda-developers.com/attach.../5/8/1/4/3/Screenshot_2014-03-29-21-12-24.png
"wifi_networks_availible_notfication_on" is set to '1'. flipping it to '0' will fix this.
David 617 said:
nice.
this should fix the notification problems. http://forum.xda-developers.com/showthread.php?t=1761900
---------- Post added at 10:32 PM ---------- Previous post was at 10:13 PM ----------
found the setting - http://dl.xda-developers.com/attach.../5/8/1/4/3/Screenshot_2014-03-29-21-12-24.png
"wifi_networks_availible_notfication_on" is set to '1'. flipping it to '0' will fix this.
Click to expand...
Click to collapse
Did it work for you? I can't find that string anywhere?
shojus said:
Did it work for you? I can't find that string anywhere?
Click to expand...
Click to collapse
i don't have the m8 yet, but theoretically should work.
follow my post here - http://forum.xda-developers.com/showpost.php?p=51490327&postcount=13 for general instructions to get into the settings database. then modify that value using an sqlEditor app
David 617 said:
i don't have the m8 yet, but theoretically should work.
follow my post here - http://forum.xda-developers.com/showpost.php?p=51490327&postcount=13 for general instructions to get into the settings database. then modify that value using an sqlEditor app
Click to expand...
Click to collapse
I found it and switched it to 0 and I'm still getting the notification after saving it and a reboot... I think it may be because of the temp-root method we have or else it's just not the correct setting? Oh well, it was worth a shot! Thanks!
shojus said:
I found it and switched it to 0 and I'm still getting the notification after saving it and a reboot... I think it may be because of the temp-root method we have or else it's just not the correct setting? Oh well, it was worth a shot! Thanks!
Click to expand...
Click to collapse
hmm.... there might be another setting somewhere else...
i don't think it has anything to do with the temp root. as long as the value gets changed it shouldn't matter how you were able to change it...
anyways, i'd keep poking around the settings to see if anything looks interesting.
David 617 said:
hmm.... there might be another setting somewhere else...
i don't think it has anything to do with the temp root. as long as the value gets changed it shouldn't matter how you were able to change it...
anyways, i'd keep poking around the settings to see if anything looks interesting.
Click to expand...
Click to collapse
Very true... Root method should not matter cause it's just required to edit the field. I'll mess around a little too and post back with any findings.
Thanks for the tip. I also found the setting in the "Global" section of the db. The changed setting survived after the reboot, but unfortunately it didn't disable the notifications.
I'm getting this too on the Verizon M8 - I just switched from a Galaxy S4, but I'm seriously considering returning the phone for this issue. Is there really no way to disable this without actually rooting or running a custom ROM? I cannot believe that I have to hit the clear button a dozen times a day to get rid of that annoying notification or turn off Wifi altogether. I also have the T-mobile OG One and never had this issue.
irwinm said:
I'm getting this too on the Verizon M8 - I just switched from a Galaxy S4, but I'm seriously considering returning the phone for this issue. Is there really no way to disable this without actually rooting or running a custom ROM? I cannot believe that I have to hit the clear button a dozen times a day to get rid of that annoying notification or turn off Wifi altogether. I also have the T-mobile OG One and never had this issue.
Click to expand...
Click to collapse
All Verizon phone's have started doing this. It is an added 'feature.'
Sent from my Nexus 10 using Tapatalk
David 617 said:
All Verizon phone's have started doing this. It is an added 'feature.'
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
I could turn it off in my Verizon GS4 - guess I will have to check on it in the GS5 before considering switching out again. I'm just going to turn off WiFi all the time in the meantime.
shojus said:
I found it and switched it to 0 and I'm still getting the notification after saving it and a reboot... I think it may be because of the temp-root method we have or else it's just not the correct setting? Oh well, it was worth a shot! Thanks!
Click to expand...
Click to collapse
It isn't going to work until we have a true root method. We don't have R/W access to anything but /system/xbin any changes you make aren't going to stick. Nothing can be written to any system files. Same reason we can't edit our build.prop or debloat our devices. Don't fret though, I am sure we will have a true root method available soon along with S-OFF.
bjamerican said:
Is there any known way to disable the CONSTANT notifications indicating that "WiFi Networks Are Available" or "You are Connected to [network name]"? These notifications are completely useless, because when are there ever not WiFi networks available? I also don't need a notification that I've connected to a trusted network... there is a WiFi icon for that exact purpose. Driving me nuts!
I just switched to the M8 after having a Galaxy Nexus running AOSP. On the Gnex, you could easily disable these notifications in the Advanced menu under WiFi settings. Did Verizon remove this ability for some reason?
Click to expand...
Click to collapse
The setting is there for me in the Advanced menu under Wi-Fi settings.. I unchecked it and have never seen the notification since.
xShin said:
The setting is there for me in the Advanced menu under Wi-Fi settings.. I unchecked it and have never seen the notification since.
Click to expand...
Click to collapse
What setting are you talking about? If you're talking about one to hide the notification in the Notification screen, I don't see any setting to disable that.
Let's be clear about what is there and not there - In the "advanced" menu in Wifi on the Verizon M8, there is a setting to uncheck called "notify me - when launching apps, notify me when WiFi is available" - that box is unchecked, but I still get the icon and message in the notification bar whenever I have Wifi on, but am not connected to one of my saved networks. It only prevents the notification from launching when opening apps.
However, on my M7, the setting is "Notify me when an open network is available" - on the M7 (t-mobile), when that box is unchecked, I never get a "wifi networks are available" when wifi is on (let's be honest, in LA or most major cities every square inch of the city has wifi networks available).
I don't have my Verizon GS4 handy but am pretty sure the menu option was to uncheck "notify me when wifi networks are available" because I never got those notifications.
Has anyone figured this out yet, especially since we are S-OFF now? I turned off anything that seemed like it might turn off the "Connected to" notification in either the secure or global tables but I still get it
Using NotifyClean with xposed to get rid of those annoying notifications.
filkbomb said:
Using NotifyClean with xposed to get rid of those annoying notifications.
Click to expand...
Click to collapse
+1 - this is what i did, simple to use. once it pops up, open the app, choose android system, and click on the wifi one to activate the disabling. reboot and you dont see it anymore.
Based on this thread:
http://forum.xda-developers.com/lg-v10/help/knock-to-wake-t3239674
So far it's only a confirmed suspicion, but it's already happened to several people including myself. Accessing the hidden menu may break the knock on feature, even without doing any modification in it.
Possible Solutions:
-Hard Reset (100% working)
-Deleting Finger Prints (I've only seen this working on 1 person in another thread)
Please report if this has happened to you and if you've done something else to solve the issue. Thanks!
I go in the hidden menu a couple times a day to change RAT selection and have only had one issue. So I wouldn't say it's a 100% the hidden menu
Sent from my LG-H901 using Tapatalk
Nope, doesn't break it. Been in the hidden menu to access Engineering Mode a bunch of times already and knock-on works fine.
Went in there to unlock the APN fields. Knock-on works fine.
Sent from my LG-H901 using XDA Free mobile app
Guys, it only breaks, as I stated in another thread, if you open the IMS Settings (which causes a crash) in the hidden settings menu. It is 100% reproducible, but *ONLY* that setting causes the issue.
toastido said:
Guys, it only breaks, as I stated in another thread, if you open the IMS Settings (which causes a crash) in the hidden settings menu. It is 100% reproducible, but *ONLY* that setting causes the issue.
Click to expand...
Click to collapse
Nope that didn't break it either
@baymon - Funny how everyone notices this until you post a PSA about it then everyone has to try to rebuke it.
If it "breaks" (turns knock on, off) you can use the anycut type app from the play store and make a shortcut to the hidden menu knock on option to toggle it back on or off if you so chose (I turned mine off so it would stop turning on in my pocket).
toastido said:
@baymon - Funny how everyone notices this until you post a PSA about it then everyone has to try to rebuke it.
Click to expand...
Click to collapse
Obviously we need more data on this issue, there could be other variables in play as well but that's why we're raising the awareness of the knock on issue.
@toastido haha it's all good.
LancerV said:
I go in the hidden menu a couple times a day to change RAT selection and have only had one issue. So I wouldn't say it's a 100% the hidden menu
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
How do you get into the hidden menu? Tried quickshortcutcreator but can't find it.
sentry07 said:
How do you get into the hidden menu? Tried quickshortcutcreator but can't find it.
Click to expand...
Click to collapse
Dial 277634#*#
I'm anxiously awaiting everyone now saying their knock on is broken ?
Didnt break mine! Thanks for the info to get into hidden menu though
nope mine still works but i do have issues with the screen in calls but thats it. but but was that way when i got it.
i think your hidden menu theory is good but my knock doesnt work but it stopped after i did a rest because the apn got messed up and it wouldnt let me add a new one. so i found this out this problem seams random as hell and if i turn knock pattern on to unlock the phone the knock works to turn the screen on but not off. i also noticed my second screen doesnt have the flash light on it when off anymore. so i will be doing a reset tomorrow unless anyone knows how to get the secound screen apps back when the screen is off. i think those apps are related to the tap on
It did break mine. Went to menu and hit apn unlock. No crash or anything. I noticed it not working immediatly. Knock code does still work.
I had the issue also, then did a reset. But I want to add to the issue that it didn't only effect knock on, but the touchscreen didn't register anything altogether when screen off. Meaning, the second screen can swipe when screen off to show the quick toggles, it did not work during that time.
joachim123 said:
I had the issue also, then did a reset. But I want to add to the issue that it didn't only effect knock on, but the touchscreen didn't register anything altogether when screen off. Meaning, the second screen can swipe when screen off to show the quick toggles, it did not work during that time.
Click to expand...
Click to collapse
mines the same no quick toggles
Mines the same no quick toggles but i found the answer with out rest on another post. i figured it out that its just something crashing the hidden menu doesnt matter what even force closing causes this problem. which is what i did seeing that the first time i used it nothing happened but the second time when the problem happened i cleared all apps and it stopped working. i'm guessing they disable it if something crashes it.
the knock on actually just gets turned off. Here's the quote for the answer make sure both knock on settings are on and it works instantly so no reboot needed.
-LBT- said:
Get yourself Quick Shortcut Maker, launch it, change the search type to 'Normal', search for 'Knock On', click on 'Settings', then on 'Try'. On the next screen, switch Knock On back and forth and see if that works.
Click to expand...
Click to collapse
clockcycle said:
If it "breaks" (turns knock on, off) you can use the anycut type app from the play store and make a shortcut to the hidden menu knock on option to toggle it back on or off if you so chose (I turned mine off so it would stop turning on in my pocket).
Click to expand...
Click to collapse
you are a genius and life saver!!! thank you.
hidden menu did break it, confirmed.