So, I tried few ROMs and kernels, but every time I had big problem, my network wasn't working.. Not only data, I couldn't make phone calls or send SMS.
Any experience with that?
EDIT: that happened only with ICS roms, now I'm back to GB and it works normally.
head0 said:
So, I tried few ROMs and kernels, but every time I had big problem, my network wasn't working.. Not only data, I couldn't make phone calls or send SMS.
Any experience with that?
EDIT: that happened only with ICS roms, now I'm back to GB and it works normally.
Click to expand...
Click to collapse
^Do you have "Pin Lock" enabled? If yes, then disable it and it should work fine after that.
h4r5h said:
^Do you have "Pin Lock" enabled? If yes, then disable it and it should work fine after that.
Click to expand...
Click to collapse
Do you mean PIN lock? Yeah, I do have it enabled, and it seems like I cant disable it
head0 said:
Do you mean PIN lock? Yeah, I do have it enabled, and it seems like I cant disable it
Click to expand...
Click to collapse
^Yeah I meant the PIN Lock. There's an option to disable it somewhere in the Settings, simply do that and reboot!
h4r5h said:
^Yeah I meant the PIN Lock. There's an option to disable it somewhere in the Settings, simply do that and reboot!
Click to expand...
Click to collapse
The thing is, I can't disable it, no idea why.. It says "Unable to change SIM card lock state".
I checked google now, seems like there were more problems with that, gonna check it later thanks
Help I also have this problem. I flashed cm10 on my wind galaxy s3, and when i did i noticed my network wasn't working. SO I decided to flash the stock rom for my device, i'm still having the same problem, does anyone know how to fix this?
plzhelpimanoob said:
Help I also have this problem. I flashed cm10 on my wind galaxy s3, and when i did i noticed my network wasn't working. SO I decided to flash the stock rom for my device, i'm still having the same problem, does anyone know how to fix this?
Click to expand...
Click to collapse
It is galaxy 3 not s3 forum !!!
Sent from my GT-I5800 using xda app-developers app
Related
After installing MIUI I can`t enable data transfer (2g/3g internet). Data transfer is turning on, but there is no 2g/3g logo and internet. This happens after installing all MIUI stock and custom roms. APN settings is correct, before it was ok. I`m installing via Clockwork recovery v5. Device is G2x (P999)
What should I do? How to enable it?
I believe for the g2x you should see an H next to the bars, that is if you are in a good service area.
Otherwise I think it also shows G, and E.
If it doesn't have anything at all, then I'm not sure.
Does the internet work when you go inti the browser?
Sent from my LG-P999 using xda premium
I'm having the same issue....
im using rg2x right now and the only way to fix it is with a hard reboot every time i turn my phone back on
try reflashing the faux kernel it worked for me to fix a problem i had not being able to turn my wifi on it should work for you too
what i have a problem is the backupp app does nto work for me im runing rg2x miui by richie
Yah I have the same problem, I notice it works but when you use WiFi then your done w/ the wifi and shut it off the regular cell data never comes back on - You have to completely reboot the phone...I'm using SINGH-UI - same thing
iCraft said:
I believe for the g2x you should see an H next to the bars, that is if you are in a good service area.
Otherwise I think it also shows G, and E.
If it doesn't have anything at all, then I'm not sure.
Does the internet work when you go inti the browser?
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
No...internet not working when I opening the browser. And EDGE/3G icons also not appear. ((
demarcus99 said:
im using rg2x right now and the only way to fix it is with a hard reboot every time i turn my phone back on
Click to expand...
Click to collapse
Hard reboot? How to do it? Is data working after hard reboot?
Cabronbr said:
try reflashing the faux kernel it worked for me to fix a problem i had not being able to turn my wifi on it should work for you too
what i have a problem is the backupp app does nto work for me im runing rg2x miui by richie
Click to expand...
Click to collapse
Please give me a link to that rom (Richie). How to reflash faux kernel?? I should do it after installing MIUI? Or you mean MIUI Rom with faux kernel? I`ve tried lots of MIUI roms (( Same problem anyway (
jele said:
Yah I have the same problem, I notice it works but when you use WiFi then your done w/ the wifi and shut it off the regular cell data never comes back on - You have to completely reboot the phone...I'm using SINGH-UI - same thing
Click to expand...
Click to collapse
I`ve tried SINGH UI too, as I remember wi-fi is on by defalut, isn`t it? So, I turned it off, and use my phone few days. Rebooted it few times, but data not worked ((
I had this problem before, go to ur APNs and go to authentication and make the authentication "None" instead of "Not set". That will enable ur data
naeem03 said:
I had this problem before, go to ur APNs and go to authentication and make the authentication "None" instead of "Not set". That will enable ur data
Click to expand...
Click to collapse
Thank you! I`ll try =) Tell me please which MIUI rom you tested with? Give me a link to that MIUI buld if it`s possible. Thank you! =)
Solution it works for me
ravshani said:
After installing MIUI I can`t enable data transfer (2g/3g internet). Data transfer is turning on, but there is no 2g/3g logo and internet. This happens after installing all MIUI stock and custom roms. APN settings is correct, before it was ok. I`m installing via Clockwork recovery v5. Device is G2x (P999)
What should I do? How to enable it?
Click to expand...
Click to collapse
Hey go to SETTINGS->MOBILE NETWORKS->ACCESS POINT NAMES-> in here select option button in your android phone, in the menu select NEW APN, you will get the APN settings as seen in this. In the link ACCESS NUMBER = SERVER in mobile.
As I am not allowed to post link for first ten TIMES! will guide you through
google search -> "vodafone apn address" the third result will be GPRS APN Settings with Username and Password - Modem Unlock. Click it and follow the method above mentioned.
Question was asked and answered.
Thread closed
Happens in CM10 on reboot. I just hit dismiss. 4G still works but really annoying that it appears on reboot every time. Any fix?
samething is happening to me, i even try restore my stock nandroid and factory reset, then flash CM10 from scratch but still on the same way asking me for freaking code
juancaperez2000 said:
samething is happening to me, i even try restore my stock nandroid and factory reset, then flash CM10 from scratch but still on the same way asking me for freaking code
Click to expand...
Click to collapse
Don't play around with it either. I did and I lost service. I had to flash again.
juryben said:
Don't play around with it either. I did and I lost service. I had to flash again.
Click to expand...
Click to collapse
What u mean flash gain, and doing that it fixed?
Sent from my SCH-I535 using xda app-developers app
Try using 000000 or 123456 to see if either of those unlocks it. Supposedly these generic codes will unlock it.
Hi Guys,
same problem here. Dismiss button is working until new network registration. 000000 or 123456 codes are not working for me.
It is asking me now, just after I changed the SIM card (same number, just dead old one). No problem before... Any suggestions?
Thanks
Peace be unto you all. I tried activating or turning on the bluetooth on my note 10.1 but up to now, it still can't come on.
any time I try to activate it, it acts as if it is about to be activated but it always go back to the deactivated mode.
I even reset the system but still no luck.
I also updated the os to jelly bean but still no luck.
the device is a wifi plus 3G model
GT-N8000
I will be very happy if anyone give me an advice on how to fix this issue.
Thanks in advance.
moussa202 said:
Peace be unto you all. I tried activating or turning on the bluetooth on my note 10.1 but up to now, it still can't come on.
any time I try to activate it, it acts as if it is about to be activated but it always go back to the deactivated mode.
I even reset the system but still no luck.
I also updated the os to jelly bean but still no luck.
the device is a wifi plus 3G model
GT-N8000
I will be very happy if anyone give me an advice on how to fix this issue.
Thanks in advance.
Click to expand...
Click to collapse
Dont know what you mean by activate. Mine you just turn on bluetooth it scans for devices and its done.
shaun298 said:
Dont know what you mean by activate. Mine you just turn on bluetooth it scans for devices and its done.
Click to expand...
Click to collapse
what I meant was that the blutooth can not even come on.
moussa202 said:
what I meant was that the blutooth can not even come on.
Click to expand...
Click to collapse
Ok, are you on stock FW? If not, which one do you have?
Is your N8000 rooted?
If so, try to flash another modem.
charly-whiskey said:
Ok, are you on stock FW? If not, which one do you have?
Is your N8000 rooted?
If so, try to flash another modem.
Click to expand...
Click to collapse
My device is on stock firmware and it is not rooted.
moussa202 said:
My device is on stock firmware and it is not rooted.
Click to expand...
Click to collapse
I would try factory reset, not much hope there. Then off to the factory.
shaun298 said:
I would try factory reset, not much hope there. Then off to the factory.
Click to expand...
Click to collapse
Thanks to everyone of you that made an effort on helping me about this problem.
I did a factory reset from setting again and also manually did a hard reset from recovery mode but the bluetooth still doesn't want to come on.
I went to SETTING, ABOUT and STATUS and I saw an available mac address for wi-fi but the bluetooth mac address was Unavailable.
I will really appreciate any help for this bluetooth issue. Thanks in advance.
moussa202 said:
Thanks to everyone of you that made an effort on helping me about this problem.
I did a factory reset from setting again and also manually did a hard reset from recovery mode but the bluetooth still doesn't want to come on.
I went to SETTING, ABOUT and STATUS and I saw an available mac address for wi-fi but the bluetooth mac address was Unavailable.
I will really appreciate any help for this bluetooth issue. Thanks in advance.
Click to expand...
Click to collapse
Just checked mine and with Bluetooth off, the BT MAC Address also shows as unavailable. It only shows up when I turn BT on.
Bulbous said:
Just checked mine and with Bluetooth off, the BT MAC Address also shows as unavailable. It only shows up when I turn BT on.
Click to expand...
Click to collapse
oo ok. but I don't know why my Galaxy note 10.1 bluetooth doesn't want to come on.
moussa202 said:
oo ok. but I don't know why my Galaxy note 10.1 bluetooth doesn't want to come on.
Click to expand...
Click to collapse
send it back its broke.
shaun298 said:
send it back its broke.
Click to expand...
Click to collapse
thanks for the help and effort.
I know Samsung doesn't post changelogs for their new updates but I just wanted to make a thread for the MG3 update and maybe future updates to point out the changes in the firmware. If you notice any changes, please post it here and I will give it a "thanks" if I can confirm that it's real and I'll put it in the OP (along with your name of course).
Sent from my GT-I9505 using xda app-developers app
WIFI Broken after MG3 firmware update
Just went ahead with my S4 (i9505) MG3 firmware update via Kies (the firmware update version is PDA:MGA / PHONE:MGA / CSC:MG3 (BTU)), everything installed without a hitch, phone rebooted, AND WIFI IS NOW BROKEN!! Meaning the Quick Toggle remains grayed-out even if you press it to turn it on, and going into System Settings and trying to turn on WiFi from there also doesn't work-- the WiFi is simply not turning on! This is a MASSIVE bug which is utterly unacceptable being in an OEM update!!
I've since restored my NANDroid backup to go back to i9505XXUAMDM. At least the WiFi works in that firmware. Yeesh.
criptyque said:
Just went ahead with my S4 (i9505) MG3 firmware update via Kies (the firmware update version is PDA:MGA / PHONE:MGA / CSC:MG3 (BTU)), everything installed without a hitch, phone rebooted, AND WIFI IS NOW BROKEN!! Meaning the Quick Toggle remains grayed-out even if you press it to turn it on, and going into System Settings and trying to turn on WiFi from there also doesn't work-- the WiFi is simply not turning on! This is a MASSIVE bug which is utterly unacceptable being in an OEM update!!
I've since restored my NANDroid backup to go back to i9505XXUAMDM. At least the WiFi works in that firmware. Yeesh.
Click to expand...
Click to collapse
I had the wi-fi bug a few days after I flashed the MG3 firmware (wi-fi toggle, both on settings and quick settings are greyed out and stuck at connecting). If you're running the international version you should flash the latest modem.
Sent from my GT-I9505 using xda app-developers app
kevin95 said:
I had the wi-fi bug a few days after I flashed the MG3 firmware (wi-fi toggle, both on settings and quick settings are greyed out and stuck at connecting). If you're running the international version you should flash the latest modem.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Same thing happened to me, had to flash the latest modem like you said: good:.
I recieved this update also. Has someone installed it without the modem problem???? This is the only issue found???
Exception
wcharon said:
I recieved this update also. Has someone installed it without the modem problem???? This is the only issue found???
Click to expand...
Click to collapse
My Galaxy S4 I9505 BTU UK is the living proof of a no failure update. Everything works silky smooth.
dklhs90 said:
My Galaxy S4 I9505 BTU UK is the living proof of a no failure update. Everything works silky smooth.
Click to expand...
Click to collapse
So you didn,t have the Modem issue. Great....
Also, do you have the Talb Back issue that you can't disable it?????
Thanks once again....
wcharon said:
So you didn,t have the Modem issue. Great....
Also, do you have the Talb Back issue that you can't disable it?????
Thanks once again....
Click to expand...
Click to collapse
As for the Talk back issue you are talking about I have no idea what you are talking about. I have never experienced such thing. Maybe it is because i have my Talkback setting to off.
dklhs90 said:
As for the Talk back issue you are talking about I have no idea what you are talking about. I have never experienced such thing. Maybe it is because i have my Talkback setting to off.
Click to expand...
Click to collapse
Ok.. Le me explain a little. I installed No Led and it requires accesabilty option in order to function. When i let it have accesability it turns activates the Talkback function besides of the phone having the Talback function unticked... Heard that also other applications haves the same issue so it is a 4.2.2 issue....
wcharon said:
Ok.. Le me explain a little. I installed No Led and it requires accesabilty option in order to function. When i let it have accesability it turns activates the Talkback function besides of the phone having the Talback function unticked... Heard that also other applications haves the same issue so it is a 4.2.2 issue....
Click to expand...
Click to collapse
That means that so far I have not had the need to install an app that needs accessibility which then turns on the talkback function.
dklhs90 said:
That means that so far I have not had the need to install an app that needs accessibility which then turns on the talkback function.
Click to expand...
Click to collapse
Yepppppp. I like No Led becuase it have sound and screen notifications with missed SMS, Calls, emails, etc.... Great application.....
Thanks for your help...
Hi all,
I have a sprint HTC U11. I have TWRP installed and the phone rooted via SuperSU. I installed the Wifi Tether Router app and got it to work. However, the app did something to mess up my WIFI and I am no longer able to turn WIFI on at all anymore. It just says "Error" in the WIFI section when I open the phone settings.
Can someone please tell me how to restore all of the factory WIFI settings to get rid of this problem?
Thanks.
You can maybe try Settings -> Backup & Reset -> Network Settings Reset to see if it will help..
velimirchek said:
You can maybe try Settings -> Backup & Reset -> Network Settings Reset to see if it will help..
Click to expand...
Click to collapse
I have tried this with no luck. I think I probably will have to flash something via fastboot, but I'm not sure what to flash.
jmalbright said:
I have tried this with no luck. I think I probably will have to flash something via fastboot, but I'm not sure what to flash.
Click to expand...
Click to collapse
I suppose you have also tried this from their support page (if I googled correct app):
Q: After using the app I can not use WiFi, I can not connect to WiFi networks
uncheck the "Scan Always Aviable" on WiFi Advanced Settings on your phone and reboot your phone
velimirchek said:
I suppose you have also tried this from their support page (if I googled correct app):
Q: After using the app I can not use WiFi, I can not connect to WiFi networks
uncheck the "Scan Always Aviable" on WiFi Advanced Settings on your phone and reboot your phone
Click to expand...
Click to collapse
Yeah, I have seen that, but the "Scan Always Available" option is not present on my U11. I know that it was on my Old M8.
jmalbright said:
Yeah, I have seen that, but the "Scan Always Available" option is not present on my U11. I know that it was on my Old M8.
Click to expand...
Click to collapse
I have relocked my bootloader as I am selling this one as Solar Red is on it's way so I cannot test it.
I might be completely wrong, but there is that or similar setting now in Location -> three dots menu in top right corner -> search -> enable wifi scan or something..
I have no other ideas except obvious ones or googled ones, if you uninstalled app, rebooted and still doesn't work you can maybe contact developer or someone here uses that app and can help you..
velimirchek said:
I have relocked my bootloader as I am selling this one as Solar Red is on it's way so I cannot test it.
I might be completely wrong, but there is that or similar setting now in Location -> three dots menu in top right corner -> search -> enable wifi scan or something..
I have no other ideas except obvious ones or googled ones, if you uninstalled app, rebooted and still doesn't work you can maybe contact developer or someone here uses that app and can help you..
Click to expand...
Click to collapse
Thanks for the help, still no luck . I'll try to get in touch with the developer.
That error seems kernel related, try restoring the stock boot.img
Sent from my HTC U11 using XDA Labs
thicklizard said:
That error seems kernel related, try restoring the stock boot.img
Sent from my HTC U11 using XDA Labs
Click to expand...
Click to collapse
I'll give that a try when I get home.
I should have also noted that doing a factory reset resolves the issue. I would like to avoid that if possible though.
Have you tried dirty flashing rom?
Sent from my HTC U11 using XDA Labs
thicklizard said:
Have you tried dirty flashing rom?
Sent from my HTC U11 using XDA Labs
Click to expand...
Click to collapse
No, I am not familiar with that process.
I believe that is flashing without wiping, on top of the existing rom install. I'm not sure that this will help; but that is what I've seen discussed as dirty flash....
So this is a conceptual only answer.
I am having the exact same issue. Anyone come up with a fix?