I installed a update.zip(Acer_AV043_A701_0.006.00_WW_GEN1.zip).
then,My A701 restarted, but it's stuck at the ACER logo.
I hook up this device to the PC ,but not go to fastboot mode , "MTB drivers" is no found.
I pressed the "volume up"- and the "power"-button at the same time, released the power-button when the screen turns on and switched the lock switch on and off and on and off: top left corner of the screen says "Erasing Userdata... Unrecoverable bootloader error (0x19000008).
Who can help me? thks.
fishwood said:
I installed a update.zip(Acer_AV043_A701_0.006.00_WW_GEN1.zip).
then,My A701 restarted, but it's stuck at the ACER logo.
I hook up this device to the PC ,but not go to fastboot mode , "MTB drivers" is no found.
I pressed the "volume up"- and the "power"-button at the same time, released the power-button when the screen turns on and switched the lock switch on and off and on and off: top left corner of the screen says "Erasing Userdata... Unrecoverable bootloader error (0x19000008).
Who can help me? thks.
Click to expand...
Click to collapse
Unfortunately, as the 701 is new, there are not a lot of options at this time.
You can try downloading a full stock rom, renaming it to "update.zip", copy it to SD card, and boot your tab holding Vol + and PWR.
See it it installs the rom. You may have to try a couple. Hopefully 1 will work.
I am going to assume the update really wasn't meant for your version (WW_COM_GEN1 build) ?
Other than that, we do not have a service rom (EUU) available for the 701.
The only other option would be Acer Repair.
MD
thank a lot.
Hi Fishwood,
To get into a workable bootloader mode, try this:
Power button and volume DOWN at the same time, while flicking rotation lock on and off
When the tablet vibrates, let go of the power button, but KEEP pressing volume down and KEEP flicking rotation lock
The tablet should get to the bootloader.
Earlier I managed to put my tablet into an unusable state, but this method got me to the bootloader and I was able to continue working.
I'll tell you what I did, but I do not recommend this particular course of action - there is a chance you will completely ruin your tablet. Moscow Desire has warned in no uncertain terms to stay away from Clockwork Mod Recovery and I trust his judgement. I chose to go against his advice to do the following, but I was fully aware that I was running the risk of bricking my tablet.
I checked that the tablet was rooted
I installed CWM 6.0.1.1
I wiped the cache, wiped the user data (factory reset) and wiped the Dalvik
I then installed a stock ROM from the SD card
I then carried on messing around in the way I have been for a few days now.
If you are interested in doing this, I can provide the links for the various posts that I got my information/downloads from.
Seriously though, you do this at your own risk. If you're not sure about what you're doing, or you're not prepared to accept that you might brick your tablet, it's better to follow an alternative course of action.
misteral1970 said:
Hi Fishwood,
To get into a workable bootloader mode, try this:
Power button and volume DOWN at the same time, while flicking rotation lock on and off
When the tablet vibrates, let go of the power button, but KEEP pressing volume down and KEEP flicking rotation lock
The tablet should get to the bootloader.
Earlier I managed to put my tablet into an unusable state, but this method got me to the bootloader and I was able to continue working.
I'll tell you what I did, but I do not recommend this particular course of action - there is a chance you will completely ruin your tablet. Moscow Desire has warned in no uncertain terms to stay away from Clockwork Mod Recovery and I trust his judgement. I chose to go against his advice to do the following, but I was fully aware that I was running the risk of bricking my tablet.
I checked that the tablet was rooted
I installed CWM 6.0.1.1
I wiped the cache, wiped the user data (factory reset) and wiped the Dalvik
I then installed a stock ROM from the SD card
I then carried on messing around in the way I have been for a few days now.
If you are interested in doing this, I can provide the links for the various posts that I got my information/downloads from.
Seriously though, you do this at your own risk. If you're not sure about what you're doing, or you're not prepared to accept that you might brick your tablet, it's better to follow an alternative course of action.
Click to expand...
Click to collapse
thks.
Pls give me the all links.
thank you so much!
I checked that the tablet was rooted I do
I installed CWM 6.0.1.1 I do
I wiped the cache, wiped the user data (factory reset) and wiped the Dalvik I do,but "Error mounting /data!"
Pls help me!
Related
First off, I know I'm a new member, and I did watch the video, I've been searching the forum for days now trying to find someone with the exact some problem as me but I've come to the conclusion I must be special as I haven't seen this problem else where. Lucky me...
Let me start off with some information about the phone.
Carrier: Vodafone AU (says XSE on the recovery screen)
Baseband Version: I9020XXKI1
Bootloader Version: I9020XXKL1
HW Version: Rev 52
Model: Nexus S i9023
Lock State: Unlocked
Primary computer: iMac
Fairly certain I have USB debugging turned off :\
I rooted and unlocked the phone and was running the latest CyberGR mod ROM and the latest AirKernel kernel. The phone was running brilliantly, not a problem in the world, very smooth, very fast, excellent battery life, I loved it. Only thing I didn't like was how the keyboard became unresponsive at times. For that reason, I think I'll be switching to the Bugless Beast ROM and thalmus kernel when (if) I get this phone fixed.
So a few days ago, the power button on my Nexus S stuffed up and wouldn't work anymore. Completely unresponsive. I couldn't lock/unlock my phone using the power button. I had to either connect/disconnect it from the USB or turn it on/off by taking the battery out to be able to use it. Needless to say, this got very tedious very quickly and I decided to unroot it and send it back to Samsung.
I looked into how to unroot and came across the Odin app and decided that I'd use that to unroot. (noob error on my behalf, I realise now) Regardless of what I'd read, Odin doesn't work on a Nexus S apparently and although I didn't flash to stock, my phone became significantly less useable, half the time it wouldn't respond to anything I did on it. I tried to boot into CWM and although I was able to do so, it was useless as my power button wasn't working.
At this stage, I took out the battery, put it back in and the phone booted up again. I didn't press the power button, it just booted up straight away. I took it out again and held the volume up button on the side and this time, I didn't get put into the CWM menu, but the normal Android recovery menu. I went to press the volume up and down buttons but nothing worked. Power button is still unresponsive.
When I don't boot into recovery, it goes past the Google screen with the unlocked lock on the bottom of it, and goes to a screen where it says "Android" in a metallic style (I disable the boot animation logo in CyberGR mod so I was used to this screen) and it just hung on there, it never booted up past that screen.
Every time I tried to use fastboot -w to wipe the phone, or oem lock or anything, I would just get < waiting for device >
I plugged it into my Windows 7 laptop, tried the one_click_stock app and got the message that my phone has no boot.img. I then googled problems regarding the boot.img and no one really had any solutions that helped me out.
The SDK won't recognise my phone is there, but the sound pops up on Windows saying a device has been connected and disconnected but it never shows up.
Is it bricked or unfixable? Clearly warranty is void, not sure if I should just take it into Vodafone and ask for a new phone (as its still within warranty period, hence why I wanted to lock it and flash a stock ROM).
Very sorry for the lengthy post, I know I was meant to be brief but I thought the more information I could give, the better chance there would be for anyone to help me out. Thanks.
Make the root of your phone with any application in the market and install the recovery ClockworkMod touch with Rom manager premium or Rom toolbox Pro. Restart recovery using Rom manager or Rom toolbox and do a full cleaning on the phone. Wipe only data and cache.
Now, select from mount and storage mount USB storage and copy over to your i9020 storage any rom ( try using the cm9 ). If the installation is successful restart, if not try some other roms. More than that I do not know how to help.
P.s.: In theory it should go smoothly, otherwise I do not assume any liability for further damage to the phone ... Good luck!
Did you know you can operate cwm using the capacitive search button instead of the power button?
Alfaneo said:
Make the root of your phone with any application in the market and install the recovery ClockworkMod touch with Rom manager premium or Rom toolbox Pro. Restart recovery using Rom manager or Rom toolbox and do a full cleaning on the phone. Wipe only data and cache.
Now, select from mount and storage mount USB storage and copy over to your i9020 storage any rom ( try using the cm9 ). If the installation is successful restart, if not try some other roms. More than that I do not know how to help.
P.s.: In theory it should go smoothly, otherwise I do not assume any liability for further damage to the phone ... Good luck!
Click to expand...
Click to collapse
Thanks for the reply, I can't actually boot into the phone or get to any market place or any screen that could make the phone useable at all, it just sits on the CyberGR android screen for when you disable the boot animation.
bedalus said:
Did you know you can operate cwm using the capacitive search button instead of the power button?
Click to expand...
Click to collapse
I was pressing the search button (the volume buttons were working when I could boot into CWM) and the text just disappeared off the screen and just showed the logo. I can no longer boot into CWM.
I've installed Ubuntu and I'm going to try running the unrbickable java app that a user on here created, hopefully that may work.
My nexus s keeps booting up like normal but then once it gets to my lock screen it shuts off by itself within 5 seconds. Sometimes I manage to put my password in and get onto my main screen but that's as far as I can get before it shuts off again. This continues repeatedly till the battery dies, turning on and shutting off by itself. This has been going on for 2 days now, since my phone died while at work and got home and charged it. When I took it off the charger when it showed a full charge it started happening, turning on and shutting off by itself and when the phone would turn on it would show low battery. As you may know this phone only has internal memory (no memory card slot). So what I'm trying to do is get my pictures and videos off of the internal memory before I do a hard reset which is what the sprint repair store told me was my only option to fix the phone but I would lose everything on there and there's absolutely no way to recover my pics and videos cuz the phone doesn't stay on long enough. Does anyone have any suggestions at all on how I could fix my phone WITHOUT doing a hard reset? I'm hoping to not lose these precious memories so I'd like to keep that as a very, very last resort. Any suggestions would be helpful and very much appreciated...
diamondrl1 said:
My nexus s keeps booting up like normal but then once it gets to my lock screen it shuts off by itself within 5 seconds. Sometimes I manage to put my password in and get onto my main screen but that's as far as I can get before it shuts off again. This continues repeatedly till the battery dies, turning on and shutting off by itself. This has been going on for 2 days now, since my phone died while at work and got home and charged it. When I took it off the charger when it showed a full charge it started happening, turning on and shutting off by itself and when the phone would turn on it would show low battery. As you may know this phone only has internal memory (no memory card slot). So what I'm trying to do is get my pictures and videos off of the internal memory before I do a hard reset which is what the sprint repair store told me was my only option to fix the phone but I would lose everything on there and there's absolutely no way to recover my pics and videos cuz the phone doesn't stay on long enough. Does anyone have any suggestions at all on how I could fix my phone WITHOUT doing a hard reset? I'm hoping to not lose these precious memories so I'd like to keep that as a very, very last resort. Any suggestions would be helpful and very much appreciated...
Click to expand...
Click to collapse
Bootloop... You flashed something wrong, modded/tweaked something wrong or overclocked and it wasn't stable... You need to go into recovery and do a CLEAN install of your rom and/or kernel.. if you used a mod/tweak this could have caused it... If overclocking DO NOT check to keep the settings after a reboot unless you are sure that these settings are stable..
Setting.Out said:
Bootloop... You flashed something wrong, modded/tweaked something wrong or overclocked and it wasn't stable... You need to go into recovery and do a CLEAN install of your rom and/or kernel.. if you used a mod/tweak this could have caused it... If overclocking DO NOT check to keep the settings after a reboot unless you are sure that these settings are stable..
Click to expand...
Click to collapse
im not sure what exactly i did but i havent changed anything from what originally came with the phone. (im still running on gingerbread) i had my phone on airplane mode so my battery wouldnt die while i was at work and somehow my phone died anyway then i put it on the charger when i got home and let it charge fully then turned it on and from the time i turned it on till now its been shutting off and turning on by itself. i guess the repair store told me its recycling itself?
diamondrl1 said:
im not sure what exactly i did but i havent changed anything from what originally came with the phone. (im still running on gingerbread) i had my phone on airplane mode so my battery wouldnt die while i was at work and somehow my phone died anyway then i put it on the charger when i got home and let it charge fully then turned it on and from the time i turned it on till now its been shutting off and turning on by itself. i guess the repair store told me its recycling itself?
Click to expand...
Click to collapse
Try booting into recovery.. Volume + and Power.. use the volume keys to scroll and power to enter.. the menu has an option for recovery (this does not do anything to your phone).. You may see a dead android,.. DON'T PANIC.. this is perfectly normal, you didn't break anything.. try pressing the volume up, then power, wait a sec and do it again.. (I always had an issue with the "stock recovery") the phone may power off or try to reboot.. (been a while, kinda fuzzy on this).. be persistent and keep retrying the fore mentioned steps and you should get a recovery menu.. Phew... Now the sad bit, you don't have any files you need on your phone.. I don't know if the stock recovery works with usb mounting, but it might.. try it.. if it does then download a custom recovery, I suggest the one in my signature, and copy from computer to phone using the usb.. in the recovery menu, after the transfer is complete, go to install / install from sd / choose the zip that you just put on your sd card / accept / and if you get this far then.. Reboot recovery, don't worry, nothing broken (yet).. lol.. In your new recovery, assuming it's the one I said, go to the advanced menu, (this is a touch version, so you don't need to use the volume keys) and select "fix permissions".. ... .. and reboot.. WORKED???
All is not lost (yet).. try wiping (ONLY) cache and dalvik(under advanced menu).. and reboot.. WORKED??
Okay, so if you are reading down here, either you are bored, or the above steps failed..
Use this program, read the forum as well..
http://forum.xda-developers.com/showthread.php?t=1766475
You can keep your phone 100% stock, but you'll need to unlock it to fix it, then you can lock it back up if you'd like.. Not necessary though.. You might think about just installing a custom rom or upgrading to jb.. OOooh the possibilities..
But here's the problem, remember the (yet).. if you have come this far down in steps to restore your phone..
ALL YOUR DATA WILL BE LOST!!!
was sianlog
Setting.Out said:
Try booting into recovery.. Volume + and Power.. use the volume keys to scroll and power to enter.. the menu has an option for recovery (this does not do anything to your phone).. You may see a dead android,.. DON'T PANIC.. this is perfectly normal, you didn't break anything.. try pressing the volume up, then power, wait a sec and do it again.. (I always had an issue with the "stock recovery") the phone may power off or try to reboot.. (been a while, kinda fuzzy on this).. be persistent and keep retrying the fore mentioned steps and you should get a recovery menu.. Phew... Now the sad bit, you don't have any files you need on your phone.. I don't know if the stock recovery works with usb mounting, but it might.. try it.. if it does then download a custom recovery, I suggest the one in my signature, and copy from computer to phone using the usb.. in the recovery menu, after the transfer is complete, go to install / install from sd / choose the zip that you just put on your sd card / accept / and if you get this far then.. Reboot recovery, don't worry, nothing broken (yet).. lol.. In your new recovery, assuming it's the one I said, go to the advanced menu, (this is a touch version, so you don't need to use the volume keys) and select "fix permissions".. ... .. and reboot.. WORKED???
All is not lost (yet).. try wiping (ONLY) cache and dalvik(under advanced menu).. and reboot.. WORKED??
Okay, so if you are reading down here, either you are bored, or the above steps failed..
Use this program, read the forum as well..
http://forum.xda-developers.com/showthread.php?t=1766475
You can keep your phone 100% stock, but you'll need to unlock it to fix it, then you can lock it back up if you'd like.. Not necessary though.. You might think about just installing a custom rom or upgrading to jb.. OOooh the possibilities..
But here's the problem, remember the (yet).. if you have come this far down in steps to restore your phone..
ALL YOUR DATA WILL BE LOST!!!
Click to expand...
Click to collapse
mentioning unlocking my phone... i did come across a menu that was a "unlock bootloader". but it said i would have to do a factory data reset...wouldnt that wipe my memory completely?
diamondrl1 said:
mentioning unlocking my phone... i did come across a menu that was a "unlock bootloader". but it said i would have to do a factory data reset...wouldnt that wipe my memory completely?
Click to expand...
Click to collapse
The first steps won't.. if you get to the unlock stage then yes.. As long as you keep it locked, you'll be fine.. If it won't let you flash a custom recovery, you can try the above steps in the stock...
Setting.Out said:
The first steps won't.. if you get to the unlock stage then yes.. As long as you keep it locked, you'll be fine.. If it won't let you flash a custom recovery, you can try the above steps in the stock...
Click to expand...
Click to collapse
sorry to keep bugging you... so i downloaded your recovery file... im not really sure what to do next since my phone doesnt stay on long enough to transfer the file from my comp to my phone.. apologizes again.. im not really tech savvy as you might have figured out :laugh:
diamondrl1 said:
sorry to keep bugging you... so i downloaded your recovery file... im not really sure what to do next since my phone doesnt stay on long enough to transfer the file from my comp to my phone.. apologizes again.. im not really tech savvy as you might have figured out :laugh:
Click to expand...
Click to collapse
Won't stay on, or the screen turns off.. ?? does the computer give a pop-up message saying that you had an issue when copy/pasting the file to the phone..??
Remember that we are working from recovery, not with the phone fully booted into your android os..
Setting.Out said:
Won't stay on, or the screen turns off.. ?? does the computer give a pop-up message saying that you had an issue when copy/pasting the file to the phone..??
Remember that we are working from recovery, not with the phone fully booted into your android os..
Click to expand...
Click to collapse
my comp isnt picking up my phone via usb...
update: now my phone isnt turning on at all, even when plugged in to charge or via usb... so does that mean im out of luck now..?
My nexus s has the same issue
brethren, I am sorry to drop in on the discussion like this but I don’t know where to get an answer from. My Nexus S (phone) has had a problem recently, it just keeps on turning on and off and mentions the “type password to decrypt storage”, if it remains on. I tried to factory reset the phone through the steps mentioned in the blog here:
1. Power off
2. Hold Volume + , volume - and power
You should get a green android image with the body opened with "Start" on the screen
3. Press Down till you get to recovery mode
4. Press power
Phone will reboot. You will then get same image of android (smaller) with red warning triangle
5. Wait a minute or two and then press volume + and power (not sure exactly what I did for this maybe it's just waiting)
6. Use volume down to select wipe data/factory reset and hit power
Select Yes - delete all user data and hit power
7. Once done select reboot system now and hit power
You are now back to zero and can start again
But it does not work. I will be obliged if someone helps me out
Thanks
hello xda. i need your help. im desperate. i dont know what else to do with my moto g here's what happened:
first of all, i dropped my moto g into the water.
right after i got it out, it startet bootlooping. then it turned off by itself after almost an hour had passed.
i put it in a bag full of rice for the rest of the night and almost the whole following day. then i plugged it into the wall charger, and it wouldnt charge at all. the only sign of life was the blinking led.
so i took it to Movistar-Peru for repair, and told me the obvious: water damage was not covered in the warranty, then my phone was returned to me.
so i decided to tear it down by myself.
everything was looking fine. the water indicators were red, but everything was clean except for the battery socket: there was mineral condensation around it. i wiped it out, cleaned it away and then the phone would actually charge the battery icon displayed normally.
so i let it charge for 3 hours and after it was completely charged i turned it on. just to run into a black screen after the bootnimation.
good news is it actually can boot into fastboot mode and can access recovery menu.
i did some research here, and seemed like my phone needed a full stock flash (that´s what i thought). i decided to unlock the bootloader, using motorola unique code. (i thought it may be needed for flashing, but it seems it is not necessary)
in recovery, my sdcard folders display normally, i can wipe data/factory reset it normally, BUT when i try to erase cache partition, the phone reboots.
so i started flashing my device through fastboot. i should mention that before i dropped it into the water, i had installed 4.4.2 ota update. but whenever i tried to flash a 4.4.2 rom, i got hab check failed for sysyem, for recovery and sometimes for boot.
now, i've tried several official motorola signed jelly bean roms (nextel br, movistar sp, claro ar, etc etc) including original Movistar Pe jb rom (which ive already flashed uncountable times) with no errors on flashing, but neither of them got me passed the black screen after bootanimation. (the phone is not off, cause the backlight remains on). the only way of getting out of it is rebooting into fastboot mode again (volume- and power).
i've also tried relocking the bootloader, and the process gives me no errors (the word "locked" displays by the end, though the phone then reboots into the "warning bl unlcked" screen) , but regardless of that and the relocking process turning out okay, status code 3 is displayed in menu, meaning the bl wasnt really relocked..?)
in short:
-dropped into water, started bootloop, then it turned itself off.
-next day it would display black screen after bootnimation, no matter what i did.
-if i choose wipe cache partition, the phone reboots.
-i've flashed it "sucsessfully" several times, still runs into a black screen after bootnimation.
-i've unlocked the boootloader
-if i try to reclock: process turns out okay("locked" word by the end), but status code remains being 3.
-i dont care about backups, i had nothing important in my phone (gdrive ftw)
my concearns are:
-possible hardware unrepairable damage
-bootloader got corrupted
-mineral condensation is still there deep inside the components
-maybe gpu? emmc corrupted? semi brick? idk..
my questions are:
-what can i do from now?
-i've read that a new bootloader can be flashed into the phone. risk of bricking my phone?
-if the bootloader is the problem, flashing a new one would solve it?
-in general, what am i doing wrong in all of this? has my phone any chance of functioning normally, at all?
please help me , i miss my phone, i got it for christmas, it is my first smartphone and i woudl like to bring it back to life if possible. thank you for reading.
I can help!
My girlfriend dropped her Moto G in water too, and it also started showing a black screen after the boot animation. I just managed to fix it.
Even if you have done some of this stuff, do it again anyway.
1-Power phone off
2-Press and hold volume down key for 3 seconds, then press the power key, then release both
3-You will see the boot options menu
4-Press the volume down key to scroll to RECOVERY, then press volume up to select it
5-You will see the Motorola logo, then after 10-30 seconds (maybe longer), you will see a Android logo with an exclamation symbol
6-Press and hold the Volume Up key for 10 seconds, then tap the power button
7-You will see a new menu
8-Use the Volume down key to scroll to Wipe data/factory reset, and then press the power key to select it.
9-Then use the volume down key to select yes, and use the power button to confirm
10-Let the phone format, then press the power key to reboot.
Once the phone has switched back on, wait and see what happens. If the Motorola logo comes on and then stays on for ages WAIT! It takes ages, but the phone will come back to life normally and be working in a few minutes! If you see a black screen again:
Repeat steps 1-7
When you see the new menu again, this time select the cache wipe option (it's the last option on the list)
Let the phone wipe and then it should reboot
This time you will defo see the Motorola logo on the screen for ages. Just keep waiting and press nothing. Hopefully after a minute or 2 it will then take you to the welcome screen
Hope this helped. I couldnt find any advice so had to experiment haha
Thank you for replying to my problem
i have already done your steps uncountable times.
every time i try to wipe cache, the phone reboots. it does not wipe anything at all, it just instantly reboots. then bootanimation, then black screen again, but nothing happens. not even after 2 minutes, after 5 or 10. nothing. just black screen until battery drains completely from continously powering the backlight. do you think maybe the water hardware-bricked my phone? also, im ocassionally getting blue screens out of a sudden, then the phone powers itself off.
Ah, ok, sorry my suggestion didn't help. I had exactly the same problem, so surprised this didn't help you. After being dropped in water, all I got was a black screen after the initial start animation. I don't really know much about phones tbh, I just managed to fix mine through trial and error. My girlfriends phone was initially sent to a shop for repair, and although the guy couldn't fix it, he said there was no signs of water damage. Not really sure then why the phone stopped working, but the method I suggested did work for me. I don't think there was anything else I tried. It's worth mentioning maybe that it took 6 weeks before I could fix the phone. Maybe it took that long to fully dry out? Straight after the accident though the phone was put in a bowl of rice for days so it should have been dried pretty quick. Don't really know what else to suggest, sorry I couldn't be more help. Have faith though, I reckon it'll come back to life soon
thank you for posting a reply and thank you for your advice. i appreciatte the attention given. i will further try some other methods in hope of a solution.
Your bootloader is working fine, dont touch it.
Unlock the bootloader and try to install cwm or twrp recovery, mount and format /data , /cache , /system through the recovery (if you manage it get recovery working ofc).
After that download mfastboot and flash stock rom with it.
Btw if you ever put anything into bag of rise, DON'T CLOSE the bag, you`ll probably do more damage than good this way.It should be done in open-air conditions.
liveroy said:
Your bootloader is working fine, dont touch it.
Unlock the bootloader and try to install cwm or twrp recovery, mount and format /data , /cache , /system through the recovery (if you manage it get recovery working ofc).
After that download mfastboot and flash stock rom with it.
Btw if you ever put anything into bag of rise, DON'T CLOSE the bag, you`ll probably do more damage than good this way.It should be done in open-air conditions.
Click to expand...
Click to collapse
are you sure it has nothing to do with the bootloader? now that you mention this.. can a 4.4.2 bl load a 4.3 rom successfully? and moreover, if i flash another bl, it will overwrite my original one right? is there eny problem on that? i am asking because no matter what i do, regardless of the "locked!" message, the menu keeps showing code status 3.
what happens if i flash the recovery and cant mount or flash any rom? or if the black screen persist after that?
and i wish i had known the rice trick before, cause i kept the bag closed for almost a day :s
grahameaddicott said:
My girlfriend dropped her Moto G in water too, and it also started showing a black screen after the boot animation. I just managed to fix it.
Even if you have done some of this stuff, do it again anyway.
1-Power phone off
2-Press and hold volume down key for 3 seconds, then press the power key, then release both
3-You will see the boot options menu
4-Press the volume down key to scroll to RECOVERY, then press volume up to select it
5-You will see the Motorola logo, then after 10-30 seconds (maybe longer), you will see a Android logo with an exclamation symbol
6-Press and hold the Volume Up key for 10 seconds, then tap the power button
7-You will see a new menu
8-Use the Volume down key to scroll to Wipe data/factory reset, and then press the power key to select it.
9-Then use the volume down key to select yes, and use the power button to confirm
10-Let the phone format, then press the power key to reboot.
Once the phone has switched back on, wait and see what happens. If the Motorola logo comes on and then stays on for ages WAIT! It takes ages, but the phone will come back to life normally and be working in a few minutes! If you see a black screen again:
Repeat steps 1-7
When you see the new menu again, this time select the cache wipe option (it's the last option on the list)
Let the phone wipe and then it should reboot
This time you will defo see the Motorola logo on the screen for ages. Just keep waiting and press nothing. Hopefully after a minute or 2 it will then take you to the welcome screen
Hope this helped. I couldnt find any advice so had to experiment haha
Click to expand...
Click to collapse
It worked for me, Thanks
liveroy said:
Your bootloader is working fine, dont touch it.
Unlock the bootloader and try to install cwm or twrp recovery, mount and format /data , /cache , /system through the recovery (if you manage it get recovery working ofc).
After that download mfastboot and flash stock rom with it.
Click to expand...
Click to collapse
ok i did what you said, i tried to flash cwm and fastboot presented no problems, (output is "okay"), but un the phone screen there's a message "mismatched partition size (recovery)", and when i enter recovery, it boots normal STOCK recovery!! i donw know whats happening. i renamed the cwm image to cwm.img and typed in these commands:
fastboot erase recovery
fastboot flash recovery cwm.img
then i clicked recovery option in the bootloader menu... but it booted into stock recovery!! this is so confusing
Now
mfastboot flash partition gpt.bin
mfastboot flash fsg fsg.mbn
at first since it seems you got partitions a bit messed for some reason.
Then flash everything in order, skip those 2
Also if you are really suspcious about the bl is not working fine, just flash motoboot.img from the same version of android you need.
thank you i will proceed to try what you said. though i have a question: is it possible for the bootloader to be overwritten with a previous version?
and what does it mean when the phone outputs "hab check failed for boot/recovery/system (etc)" ? i sometimes get those errors when flashing other region (official) roms
liveroy said:
Now
mfastboot flash partition gpt.bin
mfastboot flash fsg fsg.mbn
at first since it seems you got partitions a bit messed for some reason.
Then flash everything in order, skip those 2
Also if you are really suspcious about the bl is not working fine, just flash motoboot.img from the same version of android you need.
Click to expand...
Click to collapse
i tried what you said and it is all the same. i choose "recovery" after flashing a custom recovery image, but it boots into stock recovery. any ideas on what might be going on?? is it possible for water damage to cause this behaviour ?
tenjou_89 said:
i tried what you said and it is all the same. i choose "recovery" after flashing a custom recovery image, but it boots into stock recovery. any ideas on what might be going on?? is it possible for water damage to cause this behaviour ?
Click to expand...
Click to collapse
Hmm, maybe leave the recovery aside for now and try to boot a 4.3 ROM (stock one).
Also you cannot downgrade to bootloader afaik, but the newer ones work fine with 4.3 ROMs.
I don't think that the eMMC got damaged, cos nothing will work then.I really can't say if your problems are coming from the water dip or it's just the Moto G being stubborn if you do even one thing the wrong way.
PS. How do you flash the recovery?
fastboot erase recovery
fastboot flash recovery recovery.bin
fastboot reboot bootloader
This way?
what about the ram? a guy on some other forum said that maybe the ram got damaged to a point where only a part of it is now writable, and it gets flooded just before the complete boot up of the system, wichi is why the phone would then crash and display a black screen. what do you think about that theory?
i am going to try with 4.3 roms now. oficial and custom and post the results.
liveroy said:
PS. How do you flash the recovery?
fastboot erase recovery
fastboot flash recovery recovery.bin
fastboot reboot bootloader
This way?
Click to expand...
Click to collapse
yes, exactly that way.
edit: except i have images instead of bins, so:
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot reboot bootloader
Typo of mine, should be .img
About that RAM theory, it really doesn't sound viable to me, but who knows.
If I have to guess, I would say it's probably some crucial component failing to initialize properly and the kernel halts the system.
hmmm do you know of a method of checking for the conditions of individual hardware componets through a pc? like probing or running a full check of everything, not just the emmc..?
These seem not to work.
But if you find the correct details, maybe there is something to test in the service menu.
I have the same problem without water damage. I guess its the 4.4 OTA bug.
Tried reflashing the firmware i already have but of no use.
Mine shows the Blue Motorola logo and then doesn't show the boot animation.
Please can anyone help me out :'(
Good day.
Thanks fore reading my post.
I had root on my phone like for 3 or 4 months. everything was great and all. I did not dwell in any ROM installing or playing with the firmware.
But I am not sure what I did that this happened.
When I restarted my phone, I experienced everything until the Logo faded to the rotating circle(loading). And it stays there. Always.
I did check on many sites and it seems to be a bootloop. I tried going into recovery, used every button combination possible(I have only 3 and also tried and for my phone and for others to work) and I can't.
It just continues normally and to the position I explained before.
I have a Vodafone Smart 4 Max and even though I want the fix for my phone, I know there are other users that also experience/experienced this problem on different phones.
Might there be a way to fix this?
Thank you for your time
EDIT:: I managed to enter in recovery mode and tried a hard reset of the android. The situation is still the same, the bootloop remaining
Go to bootloader and flash factory firmware with fastboot
I wish I could. I have no idea how to access the bootloader(as I see no function like that).
I only have 4 options:
1).Reboot system now
2). Wipe Data
3)Wipe Cache
4). Recovery from back-up on SD (which I am stupid and don't have)
andreinit said:
I wish I could. I have no idea how to access the bootloader(as I see no function like that).
I only have 4 options:
1).Reboot system now
2). Wipe Data
3)Wipe Cache
4). Recovery from back-up on SD (which I am stupid and don't have)
Click to expand...
Click to collapse
How did you get to recovery? Wasn't it through bootloader? I found the information you get into bootloader like this: (power off) press and hold "end call"+"power on"+"volume up". If it doesn't work try the same but with "volume down". I guess you tried it, but you never know (plus I've got a feeling you can flash new rom with option 4 you've got there)
minimale_ldz said:
How did you get to recovery? Wasn't it through bootloader? I found the information you get into bootloader like this: (power off) press and hold "end call"+"power on"+"volume up". If it doesn't work try the same but with "volume down". I guess you tried it, but you never know (plus I've got a feeling you can flash new rom with option 4 you've got there)
Click to expand...
Click to collapse
Hm, I know what you are saying. For me to enter in recovery mode though, I needed to do the following.
1). Fully shutdown the phone for like 30 seconds
2). Volume UP + power button until the first logo with android appears
3). Let the buttons go and I enter
The problem is that adb and fastboot don't see my device at all. I have been tweaking with the drivers for so long, thinking that may be the cause, but I have no results.
And I can use the backup thing to flash a new rom? It requests an update file though, not an image(a zip file)
I think this is about your phone, maybe it will point you in the right direction:
https://www.youtube.com/watch?v=bKHEZbj4NHo
They are figuring out firmware installation on a similair model here: http://forum.xda-developers.com/android/help/stock-rom-vodafone-888-t3002958
Hi,
Apologies if this has been asked before, but I've done a relatively thorough search and I can't find a solution to this problem.
I have an S6 (SM-G920F), It was playing up for a few weeks before this, not charging well, and what not, thought it was a cable/hardware issue. Then it stopped working entirely. Initially when it was plugged into the wall it would say it was 91% charged, but if you tried to turn it on it would turn off, and reboot into the charging screen.
I've done quite alot of reading and I've ended up flashing it with Odin (I have a single .md5 file, which i've loaded onto the phone via AP) using the most recent FIrmware UK EE for the SM-G20F. This was successful, however now it only loads the Black screen with white text Samsung S6 powered by android screen and then goes blank and back to the white text screen.
I downloaded an alternative firmware (the one previous version), but this has had the same effect. I've tried to repartition with odin, but this fails.
1.) Is there anyway I can fix this?
2.) If not Is there anyway to remove files whilst in downlod mode?
3.) If I cannot fix it or recover my data, is there anyway to wipe the data securely from my phone so I can sell it for parts?
At present, I can't access recovery mode, only download mode. But whilst Odin communicates with the phone in download mode, I can't seem to access my files from explorer?
1. I would say you'd have to clear cache, immediately after flashing the firmware with Odin, but to do that, you'd have to get to Recovery Mode first...
Why can't you get to it? Does it just start trying to boot nornally? Because if so, it's just a matter of timing it. What I do is... hold power+home+voldown to get to the screen that asks me if I want to get into Download Mode, I press cancel, and immediately start holding power+home+volup until I see the bootsplash screen, and release the power button but keep holding home+volup, and it gets me to Recovery every time, even when I have difficulties such as this.
2. Not that I'm aware of. BUT you could flash TWRP with Odin, and if you then can manage to get to Recovery, you just need to plug your phone into a computer, and your phone will show up in the computer as a device/disk and you can freely remove stuff from it.
If... IF this were to work, I would suggest downloading a stock-based ROM and flashing it. It's far more likely to work properly and bootup without issue than the firmwares you can get, and it's far less much of a headache to do.
3. Nope. There are apps that can wipe data securely (such as Shreddit which does it according to military standards), but it can't be done from Download Mode. There may be some script that could do it in Recovery Mode, but I doubt it.
I mean... technically... you could flash TWRP, go to Recovery, move to your PC all the stuff you want to keep, select the wipe option in TWRP and then transfer randomly generated data from your PC to your phone until it's full - there are many apps that can generate such data. It's not something you could pass off as very very secure, but it should suffice.
I seem to always keep going to trying TWRP - so, you know, give it a shot.
King-V said:
1. I would say you'd have to clear cache, immediately after flashing the firmware with Odin, but to do that, you'd have to get to Recovery Mode first...
Why can't you get to it? Does it just start trying to boot nornally? Because if so, it's just a matter of timing it. What I do is... hold power+home+voldown to get to the screen that asks me if I want to get into Download Mode, I press cancel, and immediately start holding power+home+volup until I see the bootsplash screen, and release the power button but keep holding home+volup, and it gets me to Recovery every time, even when I have difficulties such as this.
2. Not that I'm aware of. BUT you could flash TWRP with Odin, and if you then can manage to get to Recovery, you just need to plug your phone into a computer, and your phone will show up in the computer as a device/disk and you can freely remove stuff from it.
If... IF this were to work, I would suggest downloading a stock-based ROM and flashing it. It's far more likely to work properly and bootup without issue than the firmwares you can get, and it's far less much of a headache to do.
3. Nope. There are apps that can wipe data securely (such as Shreddit which does it according to military standards), but it can't be done from Download Mode. There may be some script that could do it in Recovery Mode, but I doubt it.
I mean... technically... you could flash TWRP, go to Recovery, move to your PC all the stuff you want to keep, select the wipe option in TWRP and then transfer randomly generated data from your PC to your phone until it's full - there are many apps that can generate such data. It's not something you could pass off as very very secure, but it should suffice.
I seem to always keep going to trying TWRP - so, you know, give it a shot.
Click to expand...
Click to collapse
Thanks for your reply! So after flashing it goes straight back into the boot loop. Weirdly if its plugged into my laptop it spend about a second or two on the "Samsung Galaxy S6: Powered by Android" screen before plunging into darkness and shortly after repeating the same message. However if I plug it into the wall it spend over twice as long on that screen before repeating the cycle. It never goes any further.
I've tried your suggestion about perhaps its timing for recovery mode, but even if I go straight from cancelling download mode to trying the power, up and home key it doesn't go to recovery. I've tried a variety of timings both plugged into my laptop and plugged into the wall to no avail. If the phone isn't plugged in, it literally won't do anything whatsoever, won't even hint at turning on.
So Next I tried flashing it with TWRP via Odin and nothings changed, exactly the same bootloop and I still can't get into recovery mode.
I'm starting to think that sadly this phone my be beyond repair! Thanks for your help though, much appreciated.
Hi! I usually run out of my bootloops like this:
try this:
1: go to download mode, and press Power + home + volume —
2: As soon as the screen turns black, continue pressing Power and home, quickly release "volume —" and press "volume +". This will get you into recovery mode.
It always worked for me, so I wish the same for you. Good luck! (And sorry for my bad english)
vinicius_guerra said:
Hi! I usually run out of my bootloops like this:
try this:
1: go to download mode, and press Power + home + volume —
2: As soon as the screen turns black, continue pressing Power and home, quickly release "volume —" and press "volume +". This will get you into recovery mode.
It always worked for me, so I wish the same for you. Good luck! (And sorry for my bad english)
Click to expand...
Click to collapse
Hi Vinicius,
Thanks for the suggestion. Unfortunately it didn't work, I even tried flashing it back to a standard ROM from TWRP, but it still didn't do anything, just back to the Samsung logo and the loop continues ever more!
Hi, I have this problem as well.
Originally I had TWRP and root flashed into my phone but for reasons I needed to remove root.
So I followed the Odin route stated here "Mobikin how to remove root from android" (I can't post links but this should be the top result when googling)
However I didn't know if the recovery/boot should have went into AP or BL on the Odin menu and googling didn't give me any answers so I may have tried both....
Right now I tried flashing TWRP and I can't seem to boot into TWRP as well.
I was able to get into recovery mode but clearing data/cache didn't fix it for me.
EDIT: I managed to flash in another stock rom and it boots into the SAMSUNG logo but gets stuck there. I already went into recovery mode to delete data and cache partition but it still doesn't boot.
Melioetta Zyguard said:
Hi, I have this problem as well.
Originally I had TWRP and root flashed into my phone but for reasons I needed to remove root.
So I followed the Odin route stated here "Mobikin how to remove root from android" (I can't post links but this should be the top result when googling)
However I didn't know if the recovery/boot should have went into AP or BL on the Odin menu and googling didn't give me any answers so I may have tried both....
Right now I tried flashing TWRP and I can't seem to boot into TWRP as well.
I was able to get into recovery mode but clearing data/cache didn't fix it for me.
EDIT: I managed to flash in another stock rom and it boots into the SAMSUNG logo but gets stuck there. I already went into recovery mode to delete data and cache partition but it still doesn't boot.
Click to expand...
Click to collapse
Same experience. For all those 6 years that I used this device, the wifi was okay until now. It (wifi) is very buggy (turning on and off, and sometimes won't turn on at all) so I restarted the device, then bootloop happens. I flashed the stock rom via odin and clear data and cache. But it is still bootlooping. I think this is the sign that I need to replace my phone IF I couldn't find a fix to this.