Hi All,
I'm trying to map network drive using the Resco Explorer, however Resco does not see the SAMBA (3.2.5) shares
There is nothing in sambas log suggesting the HD2 is trying to connect.
I had no problems with wm6.1 but on my 6.5.x it doesn't work.
I was searching the forum but couldn't find the answer. Anyone has an idea? Maybe someone managed to solve this?
maybe this?
pepesz said:
Hi All,
I'm trying to map network drive using the Resco Explorer, however Resco does not see the SAMBA (3.2.5) shares
There is nothing in sambas log suggesting the HD2 is trying to connect.
I had no problems with wm6.1 but on my 6.5.x it doesn't work.
I was searching the forum but couldn't find the answer. Anyone has an idea? Maybe someone managed to solve this?
Click to expand...
Click to collapse
instead of COMPUTER\DISK, try this: \\COMPUTER\SharedDocs (=name of the shared folder on my pc)
this works with me, good luck!
bramgg said:
instead of COMPUTER\DISK, try this: \\COMPUTER\SharedDocs (=name of the shared folder on my pc)
this works with me, good luck!
Click to expand...
Click to collapse
Yep, I did exactly this the other day.
Resco doesn't see samba shares directly (like a windows PC would see them in my network places or whatever), so you have to tell Resco the location.
I have an ubuntu server called "ubuntu", and my shares are "music", "photos" and so on. To get resco to see the shares I typed:
\\ubuntu\music
\\ubuntu\photos
etc...
Note, it wont work based on IP addresses (that was what originally caused my problem).
To find out your PC name (if you don't know it) on a windows machine, hold the windows key, hit pause break, and then click on computer name (this is for XP).
Cheers.
blog post about this very subject
I got it too sometimes. I dont know the reason tho.
But hey it is so easy to set it up manually.
It is longer but will work anyways. Try the method the guy 2 posts above me posted with \\COMPUTERNAME\SHAREDFOLDER
WIll work if you are in the same network.
Ah and make sure not to connect via mobile network but with WiFi as then you are not in the same net.
Thanks all of you!
It works at least partially...
Works for shares without password, doesn't work for password protected shares.When i put \\computer\myshare and then press ok then I'm asked for user name and password. As soon as I fill them in the application freezes (maybe it tries to connect?) I gave it 5 minutes and then I had to reset HD2
Strange problem
I reinstalled resco but no improvements.
Thanks again
Yeah i noticed that one too.
Do not use pass protection on shares.
It must be a bug in the Resco Explorer.
Before i thought i made a fault but i never tried it out again as i assume a freeze as not too good for the device LOL
I'm not sure where the problem is. I tried the same on P3600 (trinity) with wm6.5. It does not freeze, but is re-asking for credentials, so I guess there are two problems:
1) resco on hd2 freezes (probably when the resco cannot connect - bug)
2) authentication problem?
Probably I'll skip the password protection until someone will find the solution...
Works fine here. It sees the shares on my XP machine, but not on the 2 Win7 ones so I have to enter them manually for those. All 3 have password protection.
On one of the W7 machines it "freezes" for about 10 seconds the first time I access the share after a soft reset, for the others it comes instantly. But that particular volume is huge (a 80% full 1.5TB drive) so it might have to do with it if it lists the contents, the others only have like 30GB on them.
You might want to try menu->settings, if you have data active as well as wifi then uncheck autodetection, and delete the network entry (or entries) that aren't your local wifi.
It can happen that it finds nothing or hangs if it tries searching the cell provider's network (that can have tons of hosts) instead of your local one.
kilrah said:
Works fine here. It sees the shares on my XP machine, but not on the 2 Win7 ones so I have to enter them manually for those. All 3 have password protection.
Click to expand...
Click to collapse
Yes - no problem for windows, I'm struggling with SAMBA (linux) shares.
Fixed freezing/credential issues when mapping drives on my HD2
Hi guys,
I had the same problem of my HTC HD2 freezing in the Network Log On dialogue when trying to map a drive, and also the issue where I was repeatedly asked for credentials which would never save. I managed to solve this issue, though in my case the problem was actually due to the network share settings on my NAS device (which is a QNAP TS-109).
What I did to remedy my problem was:
Go to the Administration page through the web-based interface for my TS-109.
Go to the Access Right Management menu.
Go to the Share Folders section.
Click on the Access Control icon for the folder I wanted to map.
Under the Guest Access Right drop-down menu I changed Deny Access to Read Only.
After that I was able to log in with my admin username and password, and to save the mapped drive on my HTC HD2 (I mapped drives successfully using both Resco File Explorer 2010 and HTC Network Plugin 1.0).
Hopefully this will work for anyone else experiencing this problem with a QNAP NAS, or if not then hopefully following similar steps on your NAS will yield favourable results.
Kate.
I am using HD2 with a Qnap NAS . Initially , got problem mapping drive as described by previous post . I did not do any changes on NAS . But , in the resco password page , i uncheck permanent login . Seems did the trick . Able to mapped folder on the NAS , even Hidden folders also . Hope this helps .
pagoda123 said:
I am using HD2 with a Qnap NAS . Initially , got problem mapping drive as described by previous post . I did not do any changes on NAS . But , in the resco password page , i uncheck permanent login . Seems did the trick . Able to mapped folder on the NAS , even Hidden folders also . Hope this helps .
Click to expand...
Click to collapse
I've post this in Resco Explorer Forum, just yesterday:
Re: File Explorer hangs when mapping Network Drive on WM 6.5
First, excuse me for my bad english (I'm italian).
I think to be solved the bug in this mode (I've a Netgear STORA NAS):
- select "Work" instead of "Internet settings" in wi-fi network adapter
- select "Work" instead of "Internet settings" in your wi-fi connection
Now, I can succesfully map all my shared resources and add them in "My Network", but I can't use wi-fi to connect in Internet.
So I've revert both the above settings to "Internet settings" ad all it's ok, browsing in Internet and accessing to my network folder on NAS.
I think that the bug is present only when we try to map a network folder the first time.
I hope to be useful to solve our problem.
Bye
Although last post is long time ago, and mine is too recent. yet I hope it would be useful to somebody, and be able to repay the great advantages I myself got from XDA forum.
HardwareC with Win7 Home Prem, HTC HD2 with RescoExplorer v.8, Wifi Connection
first, as most of the posts, I can see PC while mapping in RescoExplorer.
yet when expanding the +, I had to enter username and password, then I get an error.
well, what I did is that I shared a folder with everyone full access on my PC.
then on resco mapping I typed the full path, i.e. \\computername\sharedfolder
then, I got it...
NOTE: when exiting Resco, and accessing the mapped folder, I still had to enter my windows username and password to access my PC shared folder that has no password...
Thus, I think when sharing a folder with a password, Resco goes nuts. for two passwords must be applied...
To use wifi at school I have to wpa corporate + TTLS etc, and g-tablet does not support that. In one of the earlier post one person suggested that I use "wifi advanced configuration editor", but the secured signal does not show up so there is nothing for me to edit. I tried to manually add the wifi connection via "setting" but I can't.
I know what wpa_supplicant.conf looks like on my Pandigital Novel; if I could edit this file on my g-tablet then I should be okay, right? Any suggestions on how to do this editing? (sheepishly looking at my back) I still can't get ADB working with my g-tab, and in any case I assume there would be issue with permission...
Thanks!
if you can get root you can use root explorer to turn R/W access on to the conf file in /data/misc/wifi and edit the conf in text editor. You may be asking for more but that is where I was editing mine to get ad-hoc mode on. Sorry I dont know the exact settings to tell you to make the actual edits.
case-sensitive said:
To use wifi at school I have to wpa corporate + TTLS etc, and g-tablet does not support that. In one of the earlier post one person suggested that I use "wifi advanced configuration editor", but the secured signal does not show up so there is nothing for me to edit. I tried to manually add the wifi connection via "setting" but I can't.
I know what wpa_supplicant.conf looks like on my Pandigital Novel; if I could edit this file on my g-tablet then I should be okay, right? Any suggestions on how to do this editing? (sheepishly looking at my back) I still can't get ADB working with my g-tab, and in any case I assume there would be issue with permission...
Thanks!
Click to expand...
Click to collapse
Add it using the normal Android tool, assuming it's hidden? Anyway, then modify it with the WiFi Advanced Config Editor. It's always possible the firmware here isn't working well with that app, but if it's a hidden AP you might need to manually add, then edit.
khaytsus said:
Add it using the normal Android tool, assuming it's hidden? Anyway, then modify it with the WiFi Advanced Config Editor. It's always possible the firmware here isn't working well with that app, but if it's a hidden AP you might need to manually add, then edit.
Click to expand...
Click to collapse
By "normal android tool" I assume you mean "setting" -- that's what I used on the pandigital novel anything. But as I said in the OP, g-tablet does not allow me to manually add an entry, so I can't use the wifi config editor :-( I also tried the app "full wifi" but I (rather, g-tablet) does not seem to be able to save the connection so created.
I'll look into root explorer as mentioned in post #2 and see how it goes... If you have better/different ideas please do share it with us!
I have an hd2 using an miui rom. I was woundering what apps would create synergy between these devices. i am using 2 right now. Does anybody else know of apps to fit this catagory, or better yet a list to fit this catagory.
bluetooth file transfer -- file manager that works for multiple android devices
textab -- text on a tablet through your phoe.
your question was a bit confusing, but i think i understand what you're asking for:
"can anyone recommend any apps that works on both honeycomb and gingerbead with these functionalities:
bluetooth file transfer
send text messages from the phone, via the table"
is that right?
dunno about the second, but for the first question: ES File Explorer is generally a good all around File Browser. just long click on any file, share, and pick bluetooth. you'll be able to pick any phone that is paired with yourd device, and you can send those files via bluetooth. works on both HC and GB
Sent from my Transformer TF101 using Tapatalk
i found 2 already and gave examples. i want to find apps that connect my phone and tablet in varis ways. another example would be dropbox
Hello,
I would like to change my MAC-address on my Nexus 5 with Cyanogen Mod 13. I found some videos on youtube, which shows a way with a root explorer, but I haven't the same files or it looked different. The way to change MAC with terminal cause no error message, but my MAC doesn't changed. Is there any different on nexus devices ?
Hi!
I have a list of about 100 WiFi SSIDs and passwords that I've extracted from my old phone and I want to add them to the new phone that runs Android 10 and I couldn't find any useful information on the internet as everything seems outdated and not working.
The closest thing I've found is this: https://github.com/steinwurf/adb-join-wifi but I had to write a script, it adds only one network at the time and it doesn't work very well because often the networks aren't added and I also have problems escaping the SSID and passwords.
I've also tried to look for wpa_supplicant.conf but apparently it's not used anymore on Android 9 and 10, instead I've found a file called WifiConfigStore.xml but I'm not sure if and how it can be edited manually. Then I read I should use wpa_cli to add the networks but I get a service error when I run it. I also looked for Android apps but nothing like I need.
How can I add programmatically my networks? Is there an adb command, a file I could edit on the phone or an app that can help me with this?
Thanks in advance
ColOfAbRiX said:
UPDATE: I created this thread again on the development section because more pertinent but now I can't find how to remove this one here!
...
Click to expand...
Click to collapse
Update: The thread in the development forum has been deleted as not qualifying for that forum.
https://forum.xda-developers.com/galaxy-j/development/rules-posting-development-t3601282
ColOfAbRiX said:
Hi!
I have a list of about 100 WiFi SSIDs and passwords that I've extracted from my old phone and I want to add them to the new phone that runs Android 10 and I couldn't find any useful information on the internet as everything seems outdated and not working.
The closest thing I've found is this: https://github.com/steinwurf/adb-join-wifi but I had to write a script, it adds only one network at the time and it doesn't work very well because often the networks aren't added and I also have problems escaping the SSID and passwords.
I've also tried to look for wpa_supplicant.conf but apparently it's not used anymore on Android 9 and 10, instead I've found a file called WifiConfigStore.xml but I'm not sure if and how it can be edited manually. Then I read I should use wpa_cli to add the networks but I get a service error when I run it. I also looked for Android apps but nothing like I need.
How can I add programmatically my networks? Is there an adb command, a file I could edit on the phone or an app that can help me with this?
Thanks in advance
Click to expand...
Click to collapse
Well, there's one way: Titanium Backup
It can restore your wifi SSIDs and passwords from an xml file named
com.keramidas.virtual.WIFI_AP_LIST-20191012-065050.tar.gz
(file is inside the archive). This file contains SSID and password in plaintext.
strongst said:
Well, there's one way: Titanium Backup
It can restore your wifi SSIDs and passwords from an xml file named
com.keramidas.virtual.WIFI_AP_LIST-20191012-065050.tar.gz
(file is inside the archive). This file contains SSID and password in plaintext.
Click to expand...
Click to collapse
Inside the archive there's WifiConfigStore.xml which I've already found it. The format doesn't look trivial to me so this idea is not really usable. But thanks!