[ROM][OFFICIAL] CyanogenMod 10 (JellyBean) Nightly Builds for SGH-T769 - Samsung Galaxy S Blaze 4G

CyanogenMod 10 is a free, community built distribution of Android 4.1 (Jelly Bean) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This phone isn't my daily driver, so I only tested a few things, and only slightly:
Known Bugs:
Screen of Death: This is a CM10 bug, many other devices are afflicted, not just the blaze. Many people are working hard to fix this.
UI action sounds may not work at first. Adjust the volume with the volume buttons, the sounds will then work fine. This is a known CM10 bug
BLN is wonky. Working on getting us merged with the stable version native to CM10.
Fixed 20121103+ : WiFi generates a random MAC address with each boot.
Camera: Flash can't be disabled
Camera: Storage location cannot be changed. This isn't really a bug, however if the interest is great enough, I might try and figure out a way to change the system default storage location.
Other things maybe? Discuss in the thread...
How to get it:
Download: http://get.cm/?device=t769 (ChangeLog)
Or download it directly through ROM Manager or CM Updater.
Google Apps:
Make sure to download and install the JellyBean GApps
http://goo.im/gapps/gapps-jb-20121011-signed.zip
PLEASE MAKE SURE TO DO A FACTORY/DATA RESET BEFORE USING THIS. This isn't up for debate. A reset of the dalvik cache helps too. If you do a dirty flash, please make sure to do a dalvik cache wipe. If you have searched this forum for a problem and haven't found it, please do a nandroid backup, then a full factory/data reset and check to see if you still have the problem. If it still persists AFTER the factory/data reset, then report it here.
Thank You!
CyanogenMod Team (all of you, seriously, you guys are awesome)
SGH-T989 Devs (all of you, cuz I basically stole all your configs)
ShabbyPenguin & PlayfulGod for encouraging me when times looked grim.
UberPinguin and others on #jb-dev-e4gt for helping me get all of this work into CM proper
Oreo, my dog, for licking me whenever I needed it.
Older Versions (don't use if you can help it).
For older/legacy/test/unofficial versions of my work, you can find them (for a while at least) here: My Funhouse. Please take care and all necessary steps to verify MD5 sums before installing any zips.

Yay! I love you people! Lol
Sent from my SAMSUNG-SGH-T769 using xda premium

This is just awesome....i can't believe my eyes!!

Is the buttons the only issue? I wouldn't mind testing it out
Sent from my SAMSUNG-SGH-T769 using xda premium

Bulletblitz27 said:
Is the buttons the only issue? I wouldn't mind testing it out
Sent from my SAMSUNG-SGH-T769 using xda premium
Click to expand...
Click to collapse
The buttons is a fairly big issue... Figuring out how to get back home is troublesome to say the least. Plus, my zip doesn't have the right drivers baked in... I may re-package and include a link to a zip to enable the soft keys (like on a galaxy nexus), just to get some navigation....
I can't really test calls since this isn't my regular phone. I know the external speaker works because I get sound effects... lemme see about re-packaging. Maybe I'll upload something more tonight.
Otherwise, the front and rear cams work, the rotation is proper.. there are things in the log cat about the compass not working, I'll figure that out soon enough...

dr4stic said:
The buttons is a fairly big issue... Figuring out how to get back home is troublesome to say the least. Plus, my zip doesn't have the right drivers baked in... I may re-package and include a link to a zip to enable the soft keys (like on a galaxy nexus), just to get some navigation....
I can't really test calls since this isn't my regular phone. I know the external speaker works because I get sound effects... lemme see about re-packaging. Maybe I'll upload something more tonight.
Otherwise, the front and rear cams work, the rotation is proper.. there are things in the log cat about the compass not working, I'll figure that out soon enough...
Click to expand...
Click to collapse
Sounds good! I'm willing to wait till it's more stable like everyone else, so no rush
Sent from my SAMSUNG-SGH-T769 using xda premium

Did you try to update touch key fw?
*#*#2663#*#* on the dial pad and press update touch key fw button on bottom.

I can't believe we have got all this in one day. I never thought this phone would get attention. I used to develop roms for the g1 pm me if you guys want some help.

in gingerbread settings.db helped me bring back the soft buttons working in some of the ports maybe we can use ics settings.db to replace this?

theprogram1 said:
in gingerbread settings.db helped me bring back the soft buttons working in some of the ports maybe we can use ics settings.db to replace this?
Click to expand...
Click to collapse
No... I'm fairly sure I borked the driver.
Part of the thing I did was to actually forward port the T769 (and I577, need to let those guys know...) changes from the Samsung source releases into the CM kernel proper.

dr4stic said:
No... I'm fairly sure I borked the driver.
Part of the thing I did was to actually forward port the T769 (and I577, need to let those guys know...) changes from the Samsung source releases into the CM kernel proper.
Click to expand...
Click to collapse
Oh okay but I can't download chrome said the website is malicious. here is the picture

theprogram1 said:
Oh okay but I can't download chrome said the website is malicious. here is the picture
Click to expand...
Click to collapse
Looks like symantec is blocking it. Try disabling it
Sent from my SAMSUNG-SGH-T769 using xda app-developers app

theprogram1 said:
Oh okay but I can't download chrome said the website is malicious. here is the picture
Click to expand...
Click to collapse
I can tell you that the link I posted was/should be safe. I'm sorry Norton doesn't think so, but a number of others have downloaded and installed the ROM. The md5sum for the zip file is posted on the first page of this thread. If you're concerned, simply download the zip and then verify the md5sum. As long as they match, you should be safe.

Guys I am sorry but didn't mean to offend anyone.
---------- Post added at 03:06 PM ---------- Previous post was at 02:51 PM ----------
Not concerned though but how do I verify the md5sum?

theprogram1 said:
Guys I am sorry but didn't mean to offend anyone.
---------- Post added at 03:06 PM ---------- Previous post was at 02:51 PM ----------
Not concerned though but how do I verify the md5sum?
Click to expand...
Click to collapse
search for "WinMD5", it's a windows based md5 summer. You can put in the file and your expected md5 value, it will tell you the actual value as well as if they match.
It's generally good idea to verify md5 sums just to make sure you don't get bad flashes, especially with Radio's.

Turn off security then download, this ROM working for me, all except touch button
cm10 *****ES

Folks, I uploaded a temporary fix for the nav keys on the first post.
This is to be flashed from CWM ON TOP of an existing CM10 install. It overwrites the kernel, modules, and replaces the build.prop to remove the soft navbar.
This is temporary because I basically used the Samsung released drivers for the hard keys. I need to figure out what the hell I need to do to port into the cm10 version of the driver.
As a consequence of being the stock driver, there's no BLN or other niceties. Just the typical stock behavior. I don't know how this will play with the CM specific key backlight settings.
Enjoy!

If u call that temporary, then dats damn good bro..
CM 10 *****ES!!!!!

Hey guys do you think I can use this as a base to port JB roms from galaxy S II?

theprogram1 said:
Hey guys do you think I can use this as a base to port JB roms from galaxy S II?
Click to expand...
Click to collapse
You could probably do it if you just pull the kernel and kernel modules... you might be able to get something going that way... you'd have to watch a logcat to figure out which other libraries you'd have to copy in.

Related

[ROM] ParanoidAndroid 2.53 JB UNOFFICIAL

Paranoid-Android-2.53-Racing19969-build
Rom Contents
Apex Launcher
Sony Walkman Player for Galaxy ICS,JB ROM
Themed Battery/Wifi/GSM Icons added
Complete set of init.d tweaks
(adb needs to be root to push files to phone)
run: adb root
Then adb remount
and now you can push files to phone
ClockworkMod Recovery V6.0.1.5 (attached)
extract recovery image from attached zip
Linux/Ubuntu Install: flash recovery image via Heimdall
command: heimdall flash --recovery recovery.img
ADB Install:
adb push recovery.img /sdcard/
adb shell
su (you may have to grant su permission on the phone)
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p22
exit
exit
Power phone off. wait 10 sec.
Power phone on.
done.
Rom Installation Instructions:
put zip on external sdcard
reboot recovery
run nandroid backup
Comlete System Wipe
install zip from sdcard
reboot
Wait 5 minutes....
enjoy!!!
Install gapps in recovery
PA_Gapps.zip
Thanks:
Google
Paranoid Android
dr4stic
Koush (ClockworkMod)
Rizal
and anyone else I may have forgotten...​
Links:
ROM: http://sourceforge.net/projects/paranoidblaze/files/pa_t769-RC.zip/download
GAPPS: http://sourceforge.net/projects/paranoidblaze/files/PA_Gapps.zip/download
CWM6 Recovery: http://sourceforge.net/projects/paranoidblaze/files/CWM6-Blaze.zip/download
Nice, will try this out today!
Iirc you can't pre load gapps with any non stock roms
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol
erikmm said:
Iirc you can't pre load gapps with any non stock roms
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol
Click to expand...
Click to collapse
Thank you. OH THANK YOU. I was hoping you'd post this.
unicorndust98 said:
Thank you. OH THANK YOU. I was hoping you'd post this.
Click to expand...
Click to collapse
Yes I know, wasn't thinking...
Mods please remove this post
Will post new update without the gapps soon...
Racing19969 said:
Yes I know, wasn't thinking...
Mods please remove this post
Will post new update without the gapps soon...
Click to expand...
Click to collapse
Kang much?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
thomas.raines said:
Kang much?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Last I knew Paranoid Android was Open Source... Not too hard to compile a rom...
source trees are on github ie: Open Source
and last but not least, once done I list a Thanks to all the people who make it possible...
and you built your's from where?
Racing19969 said:
Last I knew Paranoid Android was Open Source... Not too hard to compile a rom...
source trees are on github ie: Open Source
and last but not least, once done I list a Thanks to all the people who make it possible...
and you built your's from where?
Click to expand...
Click to collapse
Settle down child... It was a joke...
But if you have one dev already working on this project, then why not try to team up with that dev to offer assistance as oppose to stepping on his toes... either way, it doesn't really matter to me... kids these days...jeez...lol
thomas.raines said:
Settle down child... It was a joke...
But if you have one dev already working on this project, then why not try to team up with that dev to offer assistance as oppose to stepping on his toes... either way, it doesn't really matter to me... kids these days...jeez...lol
Click to expand...
Click to collapse
Not trying to step on toes... I thought I saw you post that you weren't going to be able to work on it much because you were gonna be gone... Next time I will contact you first so you know... I haven't been on XDA for a while. I did some work in a few other forums before coming here. Started in the SGS4G forum doing themeing and light rom work, then moved to the Galaxy SII for a while... There I ported ICS before they even had it available... Then I went to the Amaze for a bit.... now I just picked this phone up for the kids so I decided to do some work in here...
So any way.. If there is anything I can help with let me know, I will do my best to chip in...
Also, What issues are you having? I have been running mine for a couple days now with no issues so far... knock on wood...
I also built a new ClockworkMod 6 recovery that I will post with this rom hopefully tomorrow...
Still doing some light themeing on the rom...
Racing19969 said:
Not trying to step on toes... I thought I saw you post that you weren't going to be able to work on it much because you were gonna be gone... Next time I will contact you first so you know... I haven't been on XDA for a while. I did some work in a few other forums before coming here. Started in the SGS4G forum doing themeing and light rom work, then moved to the Galaxy SII for a while... There I ported ICS before they even had it available... Then I went to the Amaze for a bit.... now I just picked this phone up for the kids so I decided to do some work in here...
So any way.. If there is anything I can help with let me know, I will do my best to chip in...
Also, What issues are you having? I have been running mine for a couple days now with no issues so far... knock on wood...
I also built a new ClockworkMod 6 recovery that I will post with this rom hopefully tomorrow...
Still doing some light themeing on the rom...
Click to expand...
Click to collapse
I'm getting the dreaded Permission denied (publickey) when I try to sync my changes upstream. I've tried every solution on the first 2 pages of a google search. and still no luck. I'm at a loss...lol
Did you verify your public key? Alot of times this is the problem.
run: ssh-add -l and verify it against your github account
Does the new recovery have to be installed? I have 6.0.1.4
Sent from my SAMSUNG-SGH-T769 using xda premium
No you can use any cwm recovery you want..
I was rocking this rom all day and loving it until I saw YouTube wasn't working. (I couldn't see the videos. Just jagged lines ). Was that just me or others too?
Sent from my SAMSUNG-SGH-T769 using xda premium
working fine here..
My girl tried to install it. Status 7 error. Redownloaded it 3 times. No MD5 to match so.
Hello, you must be getting a bad download.. I have done it multiple times to verify... make sure and wipe dalvik...
also uploaded md5sum so you can verify
Link:
http://sourceforge.net/projects/par...769-2.53-06NOV2012-214337.zip.md5sum/download
Sorry . Doesnt help. Have downloaded from 3 diff Pc's and a phone. All come up as Error 7 with a no match on the md5. Nothing else I can do ..oh well. Thanks anyways.
Have downloaded this 22 times now.
chjema said:
Sorry . Doesnt help. Have downloaded from 3 diff Pc's and a phone. All come up as Error 7 with a no match on the md5. Nothing else I can do ..oh well. Thanks anyways.
Have downloaded this 22 times now.
Click to expand...
Click to collapse
Hello, I am going to do a new upload and will update the links when finished. Must have had a bad upload as I just downloaded adn have an error flashing also...

[ROM] [4.1.2] [UCLL3] Stock Debloat (updated 1/4/13)

CREDIT
All credit here goes to mohan_kr and his anonymous source, without them, this couldn't exist.
INFO
This is a debloated, deodexed version of the UCLL3 leak, which is fully functional, so far as I have been able to tell.
This is NOT rooted by default, you must flash superuser to obtain root, mentioned later in this post.
I have left in all applications that I believed are accessed through settings options, even the ones for motion tutorials. This is NOT bare bones. Almost every Samsung app is still here, besides Media Hub because I always thought it was useless. I may remove the Samsung backup apps at a later date, I have not seen what they do yet.
Anyone looking to use this as a base for a ROM, feel free to do so, just follow what mohan_kr wanted and give credit to his anonymous source. I haven't done anything difficult, so no need to mention me at all.
What I have removed:
google+
swype
youtube
kindle
google books
city ID
family map
featured apps
mog
liveTV
google magazines
media hub
need for speed shift
ocean wather
quickoffice
sns.apk
smartwifi
telnav
google videos
WISP
weather wall
yellow pages
att code scanner
att digital locker
my att
ready2go
talkback
DISCLAIMER
I am not responsible for anything that happens to you or your device(s) from using this ROM. Hard brick, soft brick, dead cat, loss of limb, amnesia - all your problems, not mine.
INSTRUCTIONS
Note that your /data partition (not your internal SD card, that is safe) WILL be wiped by the ROM's updater script.
Download ROM and whatever else you wish to flash (e.g. root, insecure kernel, radio)
BACK UP YOUR STUFF. nandroid, titanium, whatever you use, just make a backup.
Wipe system/data if you're coming from an AOSP based ROM (anything not TouchWiz). This may not be needed, but I have not tried it myself.
Flash ROM through recovery. I'm using sk8's latest CWM touch recovery, it should work with that
Flash any other additions you want (root, mohan's insecure kernel, the UCLL3 radio)
Wait for the device to boot. There wasn't any initial setup for me, just go add your google account through settings yourself.
DOWNLOADS
ATT-SGH-I727-UCLL3-debloat
Version 2 done by android88 - even less bloat, widgets and some apps not included
Root/busybox
Scroll to bottom for link, all credit goes to mohan_kr, as it is his thread and link. Give him thanks!
Insecure Kernel - again, thanks to mohan_kr and his source.
UCLL3 Radio - and finally, another thanks to mohan_kr and his source.
First and first.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I'm second!
Sent from my SAMSUNG-SGH-I727 using xda premium
Thanks! :good:
Camera seems to keep failing for me
Edit: clearing cache fixed it.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
greekunit690 said:
Camera seems to keep failing for me
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
i had that issue before too. i think that is an issue with the leak, not with this ROM, as i didnt remove anything related to the camera at all. once the thing i wanted to take a picture of was gone though, the camera decided to work. i think its just hit or miss, keep trying to reopen it.
updated main post with newer, less bloated version done by android88.
removes more apps, most widgets, and the news lockscreen, possibly more.
I'd like to install a different battery icon (one that indicated percent left) but I'm not sure what is compatible with this rom. Can anyone point me in the right direction?
Thanks in advance
pooch11 said:
I'd like to install a different battery icon (one that indicated percent left) but I'm not sure what is compatible with this rom. Can anyone point me in the right direction?
Thanks in advance
Click to expand...
Click to collapse
You have to decompile the systemui and edit the correct XML in order to get the battery icons to represent the way you want 1-100% battery icon you best bet is to go to embryo 6.2 or learn some theming
pooch11 said:
I'd like to install a different battery icon (one that indicated percent left) but I'm not sure what is compatible with this rom. Can anyone point me in the right direction?
Thanks in advance
Click to expand...
Click to collapse
You could use the zips from the Embryo general thread, they're both UCLL3.
http://forum.xda-developers.com/showthread.php?t=2082700
Atrizzain said:
You could use the zips from the Embryo general thread, they're both UCLL3.
http://forum.xda-developers.com/showthread.php?t=2082700
Click to expand...
Click to collapse
Awesome thanks a lot!
pooch11 said:
Awesome thanks a lot!
Click to expand...
Click to collapse
You better becarefull all those mods pertain to embryo only you will be replacing the systemUI with embryo etc
crashpsycho said:
You better becarefull all those mods pertain to embryo only you will be replacing the systemUI with embryo etc
Click to expand...
Click to collapse
you're right systemUI crashes as soon as the phone boots up. It's ok I did a backup right before flashing so it's all good. I'll keep searching until I find something that works.
pooch11 said:
you're right systemUI crashes as soon as the phone boots up. It's ok I did a backup right before flashing so it's all good. I'll keep searching until I find something that works.
Click to expand...
Click to collapse
You're welcome to just pull the icons I made from my zip and use them. Just replace the ones you don't want with mine or whatever you choose.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I have already bur a few together for this rom. I will post link hold on
Here:
http://forum.xda-developers.com/showthread.php?p=36984107
If you don't want the toggles look further up. There is a center clock one without them. Or just send me a PM I can whip it up pretty fast.
pooch11 said:
I'd like to install a different battery icon (one that indicated percent left) but I'm not sure what is compatible with this rom. Can anyone point me in the right direction?
Thanks in advance
Click to expand...
Click to collapse
what everyone else here has said hopefully has been of help, but if you just want the information of the battery level and dont care about it being the actual icon, there is an option in settings to show battery level in text form next to the icon.
im assuming you dont want that, but just letting you know on the off chance that you didnt know the option was there.
Can anyone confirm if exchange server is working on this rom?
jd1639 said:
Can anyone confirm if exchange server is working on this rom?
Click to expand...
Click to collapse
i cant confirm it for a fact, as i dont have any exchange account to test it with, but i know for a fact in the version i did, i did not remove exchange, nor the forced security that goes along with it. if exchange is working on samsungs end, it should be working on this.

[UVMB1][STOCK][CWM/TWRP]Full Odexed and Deodexed Stock

Besides the modem stuff thanks to racing19969 here, it doesn't look like anything is really around for this - though given all the other fun options I'm not surprised Regardless, I figured I should actually do something for the Blaze as it's been a while so here I am!
[size=+1]I AM IN NO WAY RESPONSIBLE FOR ANYTHING THAT HAPPENS (GOOD OR BAD) AS A RESULT OF FLASHING OR ATTEMPTING TO FLASH WHAT IS POSTED HERE![/size]
I am normally a bit verbose on things, but I really didn't do much here. The below files were all pulled from either dumps from the phone or pulled from the UVMB1 tar I got from sammobile.com.
The odexed version I did NOTHING to (except fashion it into something CWM flashable), which means it is unrooted and it includes the stock kernel. The deodexed/zipaligned version includes SuperSU v1.34 (found here) as well as busybox (v1.20.2 thanks to imnuts). I also went through and removed 3 apks, 1 lib, and some smali bits in Settings.apk and framework.jar that were related to carrier iq. It's actually rendered dormant by T-Mobile, but better safe than sorry. Also - this one does not include a kernel as I don't want to force it on folks (even though it's likely a good idea!).
I AM IN NO WAY RESPONSIBLE FOR ANYTHING THAT HAPPENS (GOOD OR BAD) AS A RESULT OF FLASHING OR ATTEMPTING TO FLASH WHAT IS POSTED HERE!
Usual rules apply - you should be cautious whenever you flash. Make sure to wipe data/factory reset to avoid issues. Flash in recovery.
As the Blaze is now privy to a number of AOSP-flavored ROMs, remember that you will need to flash the stock UVMB1 kernel if you aren't already using it. Others might work but I haven't tested, so YOU HAVE BEEN WARNED!
Installation instructions:
- Backup your current setup/data
- Download file and place on sdcard
- Boot into CWM/TWRP recovery
- Recommended to wipe data/factory reset in CWM/TWRP recovery
- Select and install the .zip you put on your sdcard
And without further ado - here are the downloads:
---UVMB1 STOCK FILES---
BLOATED UVMB1 DEODEXED ROOTED BUSYBOX-ED
md5: 8B2E2C2E8C79890683745A3F8EE83450
BLOATED UVMB1 ODEXED UNROOTED w/ KERNEL
md5: 56AF8F5118550B6DDF430AE167C43343
STOCK UVMB1 KERNEL
md5: 8187DD61083FDF7DDBDD0B1A9357B5FD
Enjoy!
Also - I did not get a chance to try this out on my wife's phone yet. I am fairly confident everything will work just fine, and recent reports seem to support such a confidence, but even so I feel I should put an "I haven't tested this" disclaimer in here
Will test this out today...
Scheherez said:
Will test this out today...
Click to expand...
Click to collapse
Sounds good - let me know how it goes
Scheherez said:
Will test this out today...
Click to expand...
Click to collapse
Ditto, i have the day off tomorrow so I will have plenty of time to play with this.
Sent from my SAMSUNG-SGH-T769 using xda premium
Is it just me or is the vibration broken?
So far so good, I've been on jb for such a long time that I forgot how much I like ics. Wifi calling is Nice too...only problem I've had so far is I can't connect to the camera, I'll try a few things to see of I can figure it out.
Sent from my SGH-T769 using xda premium
---------- Post added at 08:44 AM ---------- Previous post was at 08:33 AM ----------
theprogram1 said:
Is it just me or is the vibration broken?
Click to expand...
Click to collapse
It seems to be working for me?
Sent from my SGH-T769 using xda premium
chinabear13 said:
So far so good, I've been on jb for such a long time that I forgot how much I like ics. Wifi calling is Nice too...only problem I've had so far is I can't connect to the camera, I'll try a few things to see of I can figure it out.
Sent from my SGH-T769 using xda premium
Click to expand...
Click to collapse
Interesting... does an error pop up or anything? If so could you get me a logcat?
Looks like I'll be trying to sneak the wife's phone away from her tonight lol
Well, I was going to get you a log and of course it worked this time. Maybe it just needed some time to settle. If it happens again, I will get a log for you. Flawless from what I've seen so far.
Sent from my SGH-T769 using xda premium
chinabear13 said:
Well, I was going to get you a log and of course it worked this time. Maybe it just needed some time to settle. If it happens again, I will get a log for you. Flawless from what I've seen so far.
Sent from my SGH-T769 using xda premium
Click to expand...
Click to collapse
It is it scanning the SD card it usually comes back with a could not connect to camera msg.
I have been running this all day. Has been working flawlessly
Sent from my SGH-T769
Dumb question...is TSM parts in this?
D/l now gonna flash
chjema said:
Dumb question...is TSM parts in this?
D/l now gonna flash
Click to expand...
Click to collapse
Nah - this is just stock, nothing more, nothing less. Well, a little less carrier iq, and a little more root/busybox. But that's it at this point
Unless I'm missing something this doesn't have anything for NFC anywhere in the settings to enable or disable it. Not that I use nfc, I just noticed that it's gone.
Sent from my SGH-T769 using xda app-developers app
anactoraaron said:
Unless I'm missing something this doesn't have anything for NFC anywhere in the settings to enable or disable it. Not that I use nfc, I just noticed that it's gone.
Sent from my SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
Not even in Settings > More... ? Thought there was an NFC checkbox or something there...
Yes there is.
Sent from my SGH-T769
Oh niiice...Lovin' this stock! Debloated & customized...running like a DREAM! Thanks dwitherelll!
dwitherell said:
Not even in Settings > More... ? Thought there was an NFC checkbox or something there...
Click to expand...
Click to collapse
LiveFaster said:
Yes there is.
Sent from my SGH-T769
Click to expand...
Click to collapse
Would something like crossbreeder or nos somehow remove it (I believe I'm running one of them)? I'd hate to have to reflash...
EDIT: Going to reflash again anyway. The checkbox isn't there for me. But I was running crossbreeder and I highly recommend it with this stock! It is WAY more responsive!
anactoraaron said:
Would something like crossbreeder or nos somehow remove it (I believe I'm running one of them)? I'd hate to have to reflash...
EDIT: Going to reflash again anyway. The checkbox isn't there for me. But I was running crossbreeder and I highly recommend it with this stock! It is WAY more responsive!
Click to expand...
Click to collapse
You would think such things would be reported if that were the case, but you never know. It is an option (and functional) on other roms, yes? Sometimes the Settings options are dependent on certain conditions being met - so if it tried to poll the nfc adapter for example and got no response maybe it wouldn't show... I really dunno though, I haven't looked very thoroughly to be honest.
dwitherell said:
You would think such things would be reported if that were the case, but you never know. It is an option (and functional) on other roms, yes? Sometimes the Settings options are dependent on certain conditions being met - so if it tried to poll the nfc adapter for example and got no response maybe it wouldn't show... I really dunno though, I haven't looked very thoroughly to be honest.
Click to expand...
Click to collapse
Here's what I have in settings>more (images attatched). One image is at the top of settings>more and there is the 'mobile networks' missing from that screenshot. The second image shows that. No NFC checkbox.
Keep in mind even if I run stock I make my own... adjustments... I will start over from the beginning and if I find out where I went wrong I will report so others will know.
I'm using the BLOATED UVMB1 DEODEXED ROOTED BUSYBOX-ED with the stock kernel linked below it and still no NFC option in settings>more. I have downloaded the files again and checked md5's and still nothing. Like I said, it's nothing major as I don't use it.
EDIT: I was going to try the odexed version to check it but got a status 7. something with the boot partition mmcblk0p8

[ROM][OFFICIAL][CyanogenMod 10.2 Nightlies for Skyrocket][TeamChopsticks]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at any of us for messing up your device, we will laugh at you.
* Collectively, and at the same time.
*/
This is the support thread for CM10.2 on the AT&T Galaxy S II Skyrocket. It is still a major work in progress, so please make sure you have a backup that you can restore if you run into problems.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view http://changelog.bbqdroid.org for a full list of changes.
IRC SUPPORT:
Join us in #teamchopsticks or #cyanogenmod on the Freenode IRC network.
DO NOT ASK FOR SUPPORT IF YOU FLASH A DIFFERENT KERNEL!
The kernel packaged with CM10.2 is very tightly coupled with the ROM code. If you install a kernel different from the one in this ROM, please do not ask for any support.
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Please see our blog at http://www.teamchopsticks.org for installation, download links and release notes.
Install instructions:
Installation, Download, and Release Notes: http://www.teamchopsticks.org/p/cm102-release-notes.html
Contributing/Building: http://www.teamchopsticks.org/p/contributing.html
FAQ/Troubleshooting: http://www.teamchopsticks.org/p/faq.html​
NOTE! You MUST use the recovery provided at the install link otherwise you will boot loop!
NOTE! You MUST wipe /cache, /data, and /system!! Also, make sure you install a 4.3-compatible gapps package. See our blog for more information.
The CyanogenMod team and TeamChopsticks would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
saved......................................
Bam!
Round of crisco for the boys!
!!!
Yoy guys serously don know how excited I just got.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4
Just wait til we hit cm11. I'll prolly crap gold bricks.
Sent from my Nexus 7 using Tapatalk 4
Thanks for the work on this guys!
Quick question... When using the provided recovery, if problems arise with the ROM, can we use it to flash back to twrp in order to restore a backup, or will we need to use it to start fresh back to a 4.2.2 release?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Awesome news!
Thanks for the work you guys put in for our device
bps119 said:
Thanks for the work on this guys!
Quick question... When using the provided recovery, if problems arise with the ROM, can we use it to flash back to twrp in order to restore a backup, or will we need to use it to start fresh back to a 4.2.2 release?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Good question ... the answer is yes, you can flash your old recovery back to the device with the newer recovery from this thread. Then from there, you can go to your nandroid from your previous ROM.
I'm not sure I'd try to use this recovery to restore a previous CWM backup. Honestly, I haven't tested that to see what would happen.
So for now, here's what I would recommend you do if you want to have a known good backup to revert to ...
1. Take a backup with your current recovery.
2. Flash the new recovery from the OP
3. Reboot to new recovery
4. Flash Alpha1
5. Profit ...
To revert back:
6. Flash your old recovery
7. Reboot to old recovery
8. Format /data, /system and /cache
9. Restore your backup
That should get you back to where you were. It isn't ideal, we know. But right now we wanted to get this build out to you guys - it's been long enough.
For what it's worth, I've been running this as my daily driver for almost three weeks now. The only major issue I've had, and it's really not a big deal, is that Focal doesn't work.
Quick question @car vs driver . . . in the settings I tapped Selinux status and it changed from Permissive to Enforcing. . may I ask what that is for ?
EDIT: for anyone who has this same question read this > http://wiki.gentoo.org/wiki/SELinux/Tutorials/Permissive_versus_enforcing
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4
It's been only a few minutes but so far so good! I have successfully let google restore my apps and have even tried the Camera app which is working pretty good with the only thing not working is 1080p videos. I have not tried making a call or the new focal app, but great job! I flashed the newer Gapps 8/13 even though I saw the post for the 7/29 just so I could try them and see if it works and so far so good. Thanks so much!
Thanks for the quick response CvD. That process is much more ideal than not being able to flash the older recovery and starting fresh again
Next question, and I hope this will be the first and last time it will need to be discussed here but, should we use this recovery to flash any other 4.3 variant of CM? I hate to ask about other roms in this thread, even if it is somewhat indirectly, but I figured that it will eventually need to be answered at some point, and want to make sure that the source of the recovery is the one to give the answer. Hopefully, being discussed so early in this thread, it will be seen by everyone and won't need to be asked again. (wishful thinking)
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
bps119 said:
Thanks for the quick response CvD. That process is much more ideal than not being able to flash the older recovery and starting fresh again
Next question, and I hope this will be the first and last time it will need to be discussed here but, should we use this recovery to flash any other 4.3 variant of CM? I hate to ask about other roms in this thread, even if it is somewhat indirectly, but I figured that it will eventually need to be answered at some point, and want to make sure that the source of the recovery is the one to give the answer. Hopefully, being discussed so early in this thread, it will be seen by everyone and won't need to be asked again. (wishful thinking)
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I'd say yes, with one caveat ... it should only be used to flash 4.3 ROM's that have the SELinux code in the kernel. That's where the major difference is. Worst case really would be a reboot of doom from what I've seen so far.
---------- Post added at 11:24 PM ---------- Previous post was at 11:21 PM ----------
By the way ... I just want to make sure this gets on the first page as well.
Special thanks to @stoopendis on this one. He bravely tested whatever we threw at him with reckless abandon (even when we were risking bricks). He's our official Team Chopsticks flash-anything-we-ask tester and has been a huge help to us over the past several weeks. Please take a moment to bang the thanks button when you see him.
Deleted
bps119 said:
https://fedoraproject.org/wiki/SELinux_FAQ
Check that link, then ask any questions you still may have.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Nvm i found a site more on topic of what is asked. thanks though.
Awesome news! Glad we are now on the road to 4.3!
Much thanks!
Edit:
Just flashed Recovery, wiped appropriate partitions and started ROM install and it aborted. Just said download was bad. I reverted and I am downloading again.
Too excited not to try again...
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Working pretty good so far! Keep post updated!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Totally could be my imagination or excitement, but my ringtone sounds louder... Ha!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
AndroidGee209 said:
Quick question @car vs driver . . . in the settings I tapped Selinux status and it changed from Permissive to Enforcing. . may I ask what that is for ?
EDIT: for anyone who has this same question read this > http://wiki.gentoo.org/wiki/SELinux/Tutorials/Permissive_versus_enforcing
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4
Click to expand...
Click to collapse
IMPORTANT: Leave SELinux status in Permissive mode. If you change it to Enforcing, you will get weird crashes. We still have a lot of work to do to get SELinux 100%.

[UNOFFICAL] [CM11] [4.4] d2kat

Welcome to d2kat!
these will be weekly builds of cm11 by tvall and myself.
there isnt much to be said about these builds execpt for what is broken on CM will be broken here.
any ROM/KitKat related questions can be asked in the Q&A here:
ROM:https://mega.co.nz/#!wBRyVQQZ!IYvnu2KwJihG86115meP8EvaIQVcgoRyMKvtuMMcvHU
Gapps:http://www.mediafire.com/download/a84xzwn0w5lplhz/pa_gapps-modular-full-4.4-20131111-signed.zip
Thanks:
 @tvall: builds
 @LeslieAnn: build server
Cyanogenmod: everything
apparently we are starting again. taking post #2
so, this thread is apparently just for my builds. since i already made it clear that i am not committed to actively working on the d2vzw, I'm assuming its to force the other devs into making their own threads for their roms.
quick faq:
I will probably keep building these for a while to keep people satisfied until cm releases official nightlies. no promises though
my builds will be given to cammykool, untested for him to post. I do not own a d2vzw, and cannot afford to go buy one. buy me one, and I'll be able to test and fix things.
my builds will almost always be only cm code, what they have pushed to github and fixes waiting to be merged. I don't feel like fixing bugs myself. the devs that actually own this device can do that, and I'll merge it into my builds as needed.
cammy wants me to push out new builds on a weekly basis. i have no idea why he likes my builds so much, but i can handle weekly or more frequent experimental untested builds
Re-subscribed Thank you, you guys are awesome!!!
Flashing as I type this! Thank you so much!
Thanks!
SovietKommando said:
Flashing as I type this! Thank you so much!
Click to expand...
Click to collapse
Let us know how it is! I'd love to try it out but I can't mess with my phone atm
Sent from my SCH-I535 using Tapatalk
Skyrocketing said:
Let us know how it is! I'd love to try it out but I can't mess with my phone atm
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Seems that Wi-Fi is broken, at least it is for me. This is on a clean flash.
SovietKommando said:
Seems that Wi-Fi is broken, at least it is for me. This is on a clean flash.
Click to expand...
Click to collapse
anything else?
tvall said:
anything else?
Click to expand...
Click to collapse
SD card was also still broken for me (I'm thinking it might just be my SD card at this point, I'm gonna try out another one), but everything else seemed to work fine.
I thought in the other thread I saw something about CM11 not flashing with TWRP... confirm/deny with this build?
This rom really needed this fresh new start Also, what is different from this build in the op and the 2013-11-13-unofficial by sspencer? Anything fixed in it that isnt in the sspencer build? Thanks
Gonna need a lot more clarity in the OP or else this thread will be exactly the same as the last one. I'll start by adding instructions:
THESE BUILDS ARE NOT 100% OPERATIONAL.
-They boot, I flashed it last night and everything worked for me (front camera, SD card, WiFi..etc) browser FC'd on me once but that might have been something else.
-You will probably get 2 galleries, not sure why or which one to disable, I didn't get that far.
Flash instructions:
-YOU MUST USE CWM, TWRP IS BROKEN
-Factory reset
-Wipe Dalvik / Cache
-Wipe system
-Wipe Data
-Flash ROM
-Boot up, let it sit for a minute
-Reboot recovery and flash the GAPPs in OP
-Reboot and sign in
-Profit.
These were pretty much the instructions last night, and the ones I followed and everything worked fine for me.
tvall said:
anything else?
Click to expand...
Click to collapse
I literally just flashed back to 4.3.1 but I ran this build for the past 3 days including the version from yesterday and today. It is seriously close to being able to be used as a DD. TVall, it seems like you are developing this until CM releases so I thought I'd say what wasn't working for me. I did not have the SD card problem but i know many do. I did have these things not working...
1. Certain apps would not reinstall from the Play Store. When I tried it said USB Storage not found
2. When launching Google+ it says network not found retry. I can view Facebook and other apps that have to get on network just fine.
3. Unable to connect to XDA using tapatalk, although I'm not sure that one is rom related as I am now back on 4.3.1 and it is still hit or miss.
4. Overall seems kinda sluggish and i'm sure that will get ironed out as the rom gets more polished. I don't necessarily mean the OS is sluggish but apps are and opening apps takes a little longer
I will probably flash back later or tomorrow as I already miss the launcher but nothing too serious here for me. Like I said it is extremely close to DD status right now and I really liked the ROM and appreciate all of your hard work.
All in all seemed OK expect WiFi and SD card issue, that's the only things I noticed. And (beepea206) yes that is true about the not flashing it with TWRP.
Sent from my SCH-I535 using XDA Premium 4 mobile app
beepea206 said:
I thought in the other thread I saw something about CM11 not flashing with TWRP... confirm/deny with this build?
Click to expand...
Click to collapse
issue was fixed in twrp 2.6.3.1 or 2.6.3.2, i don't remember. twrp 2.6.3.3 fixed bugs in .1.
at the time of this post, i believe 2.6.3.0 is the most recent build officially available for the d2vzw. this is why i prefer the nexus line
joedajoester said:
This rom really needed this fresh new start Also, what is different from this build in the op and the 2013-11-13-unofficial by sspencer? Anything fixed in it that isnt in the sspencer build? Thanks
Click to expand...
Click to collapse
this build is made blindly by me. sspencer actually owns a d2vzw and can test and fix things. all i do is build and upload. his builds will be mostly working usually. mine will be just cm and fixes they make.
Download link not working
The download link for the ROM reads this when clicked:
"The file you are trying to download is no longer available.
This could be due to the following reasons:
The file has been removed because of a ToS/AUP violation.
Invalid URL - the link you are trying to access does not exist
The file has been deleted by the user."
I'm running the 4.4 from the older post before this one and would really like to update considering the front camera currently doesn't work on my ROM and may fix a few things. I've the link on multiple browsers and even installed the mega extension and it still doesn't work. Could you reupload?
ArcticSpyder said:
The download link for the ROM reads this when clicked:
"The file you are trying to download is no longer available.
This could be due to the following reasons:
The file has been removed because of a ToS/AUP violation.
Invalid URL - the link you are trying to access does not exist
The file has been deleted by the user."
I'm running the 4.4 from the older post before this one and would really like to update considering the front camera currently doesn't work on my ROM and may fix a few things. I've the link on multiple browsers and even installed the mega extension and it still doesn't work. Could you reupload?
Click to expand...
Click to collapse
If you read the forums this build is "dead". So yes link no longer available.
Sent from my SCH-I535 using XDA Premium 4 mobile app
I made a new build and gave it to cammy. Guess he didn't post. Ill post a link later
tvall said:
I made a new build and gave it to cammy. Guess he didn't post. Ill post a link later
Click to expand...
Click to collapse
All you guys are doing amazing eork on this. ~thumbs up~
Sent from my SCH-I535 using XDA Premium 4 mobile app
---------- Post added at 09:26 PM ---------- Previous post was at 09:26 PM ----------
nickhex89 said:
All you guys are doing amazing eork on this. ~thumbs up~
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Work not eork
Sent from my SCH-I535 using XDA Premium 4 mobile app
Tvall you still gonna post your build?
Sent from my SCH-I535 using Tapatalk

Categories

Resources