Related
i need some help rooting my strat i been following this guide http://rootzwiki.com/topic/7840-kernel-guide-root-your-stratosphere/
and i already flashed the kernel already and im on the part where u need to put your phone into usb debugging and so i plug my phone in and let it install its drivers and then i open up CMD in windows and i copy and paste this command F:\Downloads\heimdall-suite-1.3.1-win32>adb devices
to see if it detects my device and it just says device not ready... soo that is where i am stuck at i have downloaded and installed android sdk and did the updates with it and i close out of it and then do the same thing in cmd and still says device not ready..... im lost
i placed android sdk under the root of my C drive called android im running windows 7 64bit
redid the WHOLE walkthrough went and reinstalled adk, and re doing the kernel file to the phone and now im back at the same part but now i get this, there is no disk in the drive please insert a disk into the drive /device/harddisk2/DR2.
and all i get is cancel try again and continue and when i do it again its the same thing..... it seems this is just a simple thing but being stupid
ill donate 15$ to who ever helps me and completes this with me lol
good job? lol didnt do anything
Did u get it I'm in the middle of rooting mmine. Still seting up adb on new laptop.
yea im still stuck BUT someone on a different forum gave me this http://rootzwiki.com/topic/9711-untested-odin-for-stratosphere/ but im a little scared to test this because this is the only phone i have
rooting thur odin right now.... wish me luck
well that didnt work and bricked
does anyone have the stock files to odin back to stock?
.
Thread moved. Would advise you to read forum rules and post in correct section.
Failure to comply with forum rules will result in an infraction and/or ban depending on severity of rule break.
I can't seem to find a Clockwork Recovery install anywhere and was wondering what the progress was in the port? I seen that someone posted they were working on it on the root thread and need to know if any updates on it? I know there are a ton of people that won't go without a slider and seeing as this phone is the only 4g slider right now I figured there would be all kinds of rom support for it. Its unlocked bootloader was the reason i got it along with my fiancee's need for a keyboard. First time i seen any android device without cwr.
cydetrakd said:
I can't seem to find a Clockwork Recovery install anywhere and was wondering what the progress was in the port? I seen that someone posted they were working on it on the root thread and need to know if any updates on it? I know there are a ton of people that won't go without a slider and seeing as this phone is the only 4g slider right now I figured there would be all kinds of rom support for it. Its unlocked bootloader was the reason i got it along with my fiancee's need for a keyboard. First time i seen any android device without cwr.
Click to expand...
Click to collapse
Ill donate to a dev who doesnt have the phone buts wants to dev
Sent from my SCH-I405 using Tapatalk
samsung stratosphere trouble!!
Hi everyone. I was looking for some help to fix the samsung stratosphere that i tried rooting the other day. I will explain to the best of my knowledge as to what i did and how i got where i am with trying to root my phone and where i believe things went bad. i downloaded heimdall and all the necessary files that i got off of the rootzwiki forum specifically for rooting this phone. I was following the instructions exactly as they are posted. Well i than tried to use a different method within heimdall called heimdall - front end. i tried flashing the kernel from the rootzwiki forum using this method. i loaded the stratosphere.pit and went to the flash menu and checked repartition and reboot phone and clicked flash. Thats where the trouble began,now it seems that my phone is stuck in a bootloop,where it will either go to the screen where it asks if you wanna flash a custom rom or it will go into recovery mode if i try to reboot the phone. When my phone is plugged in, it dont show thats its charging but the power button will work sometimes or i just have to hold the power and volume down button and it will go to the custom rom screen. If anyone could help me figure this out,it would be greatly appreciated and thanks in advance for any help or advice on my situation.
Here is a quick Guide to Rooting your Samsung Conquer 4G
1. Download Super One Click Root 2.3.1(below)
2. Extract the rar to any location you choice
3. On your phone click Menu, Settings, Application, Development and check USB Debugging.
4. Open SuperOneClick
5. Plug your phone in to the USB
6. Click Root and watch it do its thing
When it is done it should have installed SuperUsers and you should now be rooted.
At this time there is no Roms or Recoverys so the only thing we benifit from this is some Apps
Links
SuperOneClick 2.3.1
http://www.multiupload.com/VGCN3ZTFM8
Samsung Conquer 4G Drivers
http://www.mediafire.com/?s6nn3rph14xfl41
Hi I'm trying it I get a window says missing driver
Samsung android usb device, acm, CDC acm data
what's that mean?
you are missing the drivers you need to install to get debugging mode to work. What i did was manually install the drivers.
But instead try installing these drivers from the link below. before you install this make sure you unplug your phone first, then install the drivers, then plug your phone back in.
If that works just run SuperOneClick like the guide i posted above
Samsung Conquer 4G Drivers Download Link
http://www.mediafire.com/?s6nn3rph14xfl41
Thank you I'm trying to download the file from the link but it's not work says failed do u have another link thanks again
The link is failed could you provide another one please?
you can try downloading it directly from samsung just click the disk with the txt EXE icon on the right and agree to the terms and the file should download
http://www.samsung.com/us/support/downloads/sprint/SPH-D600ZKASPR
lmk if you have any other issues
Ty but the link is not working also.
in the superoneclick folder there is a drivers folder try to manually install the drivers for your phone using the drivers in that folder if you are still having issues after trying this please PM me there is one more thing we can try.
thanks drayjr
Thank you I did what you qsaid and it worked like a charm thanks again for all your help I really. Appreciate thank you and happy holidays
no I hope you enjoy your new phone. I just hope a Dev makes a recovery for are phone soon. but we will see what happens
thanks
drayjr
Sent from my SPH-D600 using Tapatalk
New to rootin
Think ive been reading for about three weeks now. Ever sinced I learned about this thang called rooting. Yes im a noob to the whole smart phone era, but I catching up. I know my way around the computer but, here I go im going to make tha big leap and givr it a try. I would just like to say thank you dray.jr cause I looked every where for a step by step rooting guide for mu conquer. I had it sincr it came out when I heard that you can even make this phone do more than it already does I was down foe it so......ill let you know how it goes if I need any help.THANKZ AGAIN.
---------- Post added at 11:45 AM ---------- Previous post was at 11:26 AM ----------
Is that all you have to do to root a Samsung Conquer 2.3.4. Is the bootloader unlocked already or...........Let me know cause I'm new to this. I did alot of reading but there's really no kind of info on if theres a lock or not.
Thanks for getting this up. I hope to root my wifes phone but nobody seems to be working on it. Thanks again.
yea i noticed i have uploaded all the files needed to make a custom recovery for are phone but i dont have any idea how to do it so i am hoping a dev see's the post and will give it a shot for us. but if not then im going to have to sell me phone and grab a phone that i can tweak. lol i cant have a phone i cant change and play with.
i have found a so called recovery for this phone just need a place to host it or you can follow this link and check it out you self....
Hello,
This is a flashable recovery image of ClockworkMod Recovery 5.0.2.7 for the SPHD600
go to google and search for sphd600 recovery and you will find this so called one i have tested it and it allows me to enter recovery mode on my Conquer
i have flashed it metro and just awaiting for metro to allow my esn/meid no word as of when this might happen
mike
Hi dray_jr thanks for your help before but now im stuck once again , my phone updated and i have to reroot im doing the same steps as before now it get stuck a step 7 waiting for device. I waited for over 10 mins and nothing please help
dray_jr said:
Here is a quick Guide to Rooting your Samsung Conquer 4G
1. Download Super One Click Root 2.3.1(below)
2. Extract the rar to any location you choice
3. On your phone click Menu, Settings, Application, Development and check USB Debugging.
4. Open SuperOneClick
5. Plug your phone in to the USB
6. Click Root and watch it do its thing
When it is done it should have installed SuperUsers and you should now be rooted.
At this time there is no Roms or Recoverys so the only thing we benifit from this is some Apps
Links
SuperOneClick 2.3.1
http://www.multiupload.com/VGCN3ZTFM8
Samsung Conquer 4G Drivers
http://www.mediafire.com/?s6nn3rph14xfl41
Click to expand...
Click to collapse
The link to the superoneclick app doesnt work. I was able to download it with this link...
http://ul.to/mutl348p
Good morning everyone.
First of all I want to apologize for my english, that I'm afraid it's very poor.
My question goes next: I bought an used Samsung Galaxy tab 2 7'' p3100 3G and it has a very big problem. It can't be connected to any pc, windows or mac. It's not a drivers' problem, so when the device is connected, the pc does nothing. Not even a display in the device manager, or a noise. However, it usually charges. I say usually because sometimes the icon battery shows a red ray, but it charges spending more time. That's all. It has been proved with three different original cables in several computers running different SO.
I don't know if it's a connector problem or it's a Rom one. It has an operator locked SO with Android 4.0.4 that not even shows the OTA update option in the menu. And I cannot select the way I want to be connected by usb in the "Storage" options.
The fact is I cannot update the device and I cannot root it in order to install a better rom or an original stock one.
I've googled all I can do to find a way for rooting the device, but all the roads drive me to the same point: Odin. The software I cannot use because my device can't be connected to any Pc.
I know this forum is my last chance. There are some ways like z4root or framaroot that work in another devices (Galaxy S for example, I think), but they have not been ported to my device. I think my chances are to make it by an apk o perhaps flashing a signed file from the original recovery.
I just need to install a simple clockword mod or having the device temporary rooted to install and run the Odin's apk that allows me to install a pre-rooted rom, an open recovery... Just a simple step for one man, But the Colorado's Canyon for me in my situation.
If someone of you know any solution or want to help me, I'll be truly grateful. And I didn't even mind to pay him for his help.
Thank you very much in advance.
Even_Flow said:
Good morning everyone.
First of all I want to apologize for my english, that I'm afraid it's very poor.
My question goes next: I bought an used Samsung Galaxy tab 2 7'' p3100 3G and it has a very big problem. It can't be connected to any pc, windows or mac. It's not a drivers' problem, so when the device is connected, the pc does nothing. Not even a display in the device manager, or a noise. However, it usually charges. I say usually because sometimes the icon battery shows a red ray, but it charges spending more time. That's all. It has been proved with three different original cables in several computers running different SO.
I don't know if it's a connector problem or it's a Rom one. It has an operator locked SO with Android 4.0.4 that not even shows the OTA update option in the menu. And I cannot select the way I want to be connected by usb in the "Storage" options.
The fact is I cannot update the device and I cannot root it in order to install a better rom or an original stock one.
I've googled all I can do to find a way for rooting the device, but all the roads drive me to the same point: Odin. The software I cannot use because my device can't be connected to any Pc.
I know this forum is my last chance. There are some ways like z4root or framaroot that work in another devices (Galaxy S for example, I think), but they have not been ported to my device. I think my chances are to make it by an apk o perhaps flashing a signed file from the original recovery.
I just need to install a simple clockword mod or having the device temporary rooted to install and run the Odin's apk that allows me to install a pre-rooted rom, an open recovery... Just a simple step for one man, But the Colorado's Canyon for me in my situation.
If someone of you know any solution or want to help me, I'll be truly grateful. And I didn't even mind to pay him for his help.
Thank you very much in advance.
Click to expand...
Click to collapse
Have you manually installed the drivers? If not, download the samsung drivers, install and try again. Read through the link below to find the drivers.
http://forum.xda-developers.com/showthread.php?t=2510669
cwyman said:
Have you manually installed the drivers? If not, download the samsung drivers, install and try again. Read through the link below to find the drivers.
http://forum.xda-developers.com/showthread.php?t=2510669
Click to expand...
Click to collapse
Unfortunately yes. I've tried with several versions of Kies, by installing manually the drivers and it doesn't work. The fact is I connect the device and the pc does nothing. Not even the device manager shows a new device or is alterated in some way. It's like one data pin in the connector was damaged or the rom was corrupted and it doesn't let the device be recognized.
I think my only chance is to make everything inside the device. By sd in the boot manager or with an apk. If not, I'm condemned to an obsolete device that could not even be updated.
Thanks for trying to help me.
Even_Flow said:
Unfortunately yes. I've tried with several versions of Kies, by installing manually the drivers and it doesn't work. The fact is I connect the device and the pc does nothing. Not even the device manager shows a new device or is alterated in some way. It's like one data pin in the connector was damaged or the rom was corrupted and it doesn't let the device be recognized.
I think my only chance is to make everything inside the device. By sd in the boot manager or with an apk. If not, I'm condemned to an obsolete device that could not even be updated.
Thanks for trying to help me.
Click to expand...
Click to collapse
This may sound absurd, but try a different version of the drivers. I had to install like a dozen drivers before it worked
mirzafran said:
This may sound absurd, but try a different version of the drivers. I had to install like a dozen drivers before it worked
Click to expand...
Click to collapse
I agree. The drivers can be so touchy. I'd uninstall and reinstall drivers numerous times before giving up. Good luck!
Sent from my GT-p511x
your cable is faulty. Get another one on ebay cheap.
I'm afraid I've tried with three different cables, as I said (one of them original from Samsung and new), two Windows Pc's, one mac and about fifteen different drivers.
Believe me: I've rooted with no problem more than twenty different devices (and jailbreaked another ones ) and this is the first time I cannot make it.
Think it's a hardware problem or a corrupted rom one. In both cases I have to root it by an apk or a flash from the sd.
Anyway, I appreciate very much your help, boys.
Even_Flow said:
I'm afraid I've tried with three different cables, as I said (one of them original from Samsung and new), two Windows Pc's, one mac and about fifteen different drivers.
Believe me: I've rooted with no problem more than twenty different devices (and jailbreaked another ones ) and this is the first time I cannot make it.
Think it's a hardware problem or a corrupted rom one. In both cases I have to root it by an apk or a flash from the sd.
Anyway, I appreciate very much your help, boys.
Click to expand...
Click to collapse
I'm in a similar situation with a Galaxy Tab 2 p3113tsyxar
It is not recognized by any computer, and my next step is to try another cord manana. Until then (hopefully) I've got a nice paperweight.
You have not rooted ur tab till now......so u have not played with your firmwares! So its better to visit a samsung store. If you have warranty then they will do it in free.(And your android will also get updated!)
If I helped you, just press thanks!
Tech Specs:
Processor Type: Quad-Core Cortex A9 Processor(When I turn on the tablet it says Allwinner A31?)
Processor Speed: 1.20 GHz
System Ram: 1 GB
Hard Drive Size: 8GB
Laptop Screen Size: 7 inch
Screen Type: Capacitive Touch Display
Battery Life: 4 hours
Battery Type: 2800mAh Lithium Ion
Network Connection: 802.11b/g/n Wireless LAN
Connector Type: 1 x HDMI, 1 x Headphone, 1 x MiniUSB 2.0
Operating System: Google Android
Accessories Included: AC Adapter,USB Cable
Operating System Version: Android 4.2 Jelly Bean
This thread is a continuation of some of the discussion that was from this thread: http://forum.xda-developers.com/showthread.php?t=2568427
While not at all high end tablets, it's always fun to see what can be squeezed out of them! As stated in the title, this thread will be regarding the following devices: Nobis NB07, Iview 774TPC, and DA-741QHD (which all appear to be the same hardware) rooting and ROMs. That should be pretty simple for now since, we currently have no ROMs and no proven root method. Some have reported success using the Kingoapp. If anyone is able to obtain root, we would like to ask that you make a copy of the firmware and upload it for those of us having trouble doing so. After doing so, we can modify it and hopefully get more our of the software.
You may also post information regarding tweaking the ROMs for these devices and other ways to make them more useful!
Warning: The following may have unforseen effects including breaking your tablet to the point of being unrepairable.
Option #1, Use KingoApp Some users have reported that this did not work for them, at least one user reported that it did.
Instructions per RawX:
For the drivers the easiest method is just using Top Notch Tablets How to install ADB drivers. That worked on the first one, the second one it didn't not entirely sure why, but you can send a email to support and ask them for development drivers for the nobis tablets and they will send the ADB drivers you need. After you have the drivers installed use kingo while the tablet is in usb debug mode BEFORE plugging it into your usb port and do not turn on usb transfer. the first time after it reboots kingo will report that it was not rooted, leave it plugged in and power off and back on and it should report the root worked. This method gives you SuperSU. Both times. I've done this were for clients of mine but its pretty straight forward.
Click to expand...
Click to collapse
The working drivers for me were: VID_1f3a_PID_efe8
Please consider trying this first and give us some feedback. A word of warning though, there has been some discussion on XDA in the past that this may be malware though I'm not sure this was ever confirmed.
Option #2, Flash firmware for an alternate device that can be rooted easily. Warning!!! Currently, there is no way to get back to stock (until someone who gets root with another method makes a copy of the firmware)
Go to this website: http://www.iviewus.com/firmware788TPC/ and download the firmware. Yes, it is for another tablet. However, the tablet appears to have the same specs as ours. Once downloaded. Install the included PhoenixSuit software. Once it is running, click the button at the bottom right to update the software to the newest version (this may not be required). Then, plug in your tablet using the usb port and install the drivers. I used google and found them all within minutes. Once the software recognizes your tablet go to the firmware tab where you have extracted the .img file and select the file. Next, click upgrade to upgrade your tablet (it has instructions to help your tablet be recognized if you are having difficulty). Once the new firmware has been flashed, then download the file RootFromOTA.zip that can be found on various places such as XDA. Move the file onto an external SD card. Then, go to settings -> backup & reset -> Recovery Mode. Your tablet will restart. Once it does, select the bottom option to install from SD card. Install the RootFromOTA.zip and then reboot. Once rebooted, install the supersu app or another root application of your choice.
Credits: As above to RawX
Congrats... You're rooted.
Mods
Currently, I've managed to get great battery life out of my tablet by installing kernel tuner and changing the settings as such:
Governor: Ondemand (default is fantasys)
Max: 1200 MHz (Default is 1200 MHz)
Min: 240 MHz (Default is 120 MHz, but I had trouble with usability at this setting and Ondemand)
I also recommend setting wifi to turn off when the screen is off and turn off autosync.
This seemed to give me a very useable system but with greatly improved battery life. Doing the above and a few other tweaks here and there have made my battery life so that it drains by about 1% overnight when not in use. I also seem to get better battery life while using the tablet. I haven't had any trouble playing games either.
neatojones said:
Option #2, Flash firmware for an alternate device that can be rooted easily. Warning!!! Currently, there is no way to get back to stock (until someone who gets root with another method makes a copy of the firmware)
Go to this website: http://www.iviewus.com/firmware788TPC/ and download the firmware. Yes, it is for another tablet. However, the tablet appears to have the same specs as ours. Once downloaded. Install the included PhoenixSuit software. Once it is running, click the button at the bottom right to update the software to the newest version (this may not be required). Then, plug in your tablet using the usb port and install the drivers. I used google and found them all within minutes. Once the software recognizes your tablet go to the firmware tab where you have extracted the .img file and select the file. Next, click upgrade to upgrade your tablet (it has instructions to help your tablet be recognized if you are having difficulty). Once the new firmware has been flashed, then download the file RootFromOTA.zip that can be found on various places such as XDA. Move the file onto an external SD card. Then, go to settings -> backup & reset -> Recovery Mode. Your tablet will restart. Once it does, select the bottom option to install from SD card. Install the RootFromOTA.zip and then reboot. Once rebooted, install the supersu app or another root application of your choice.
Congrats... You're rooted.
Click to expand...
Click to collapse
I am assuming the camera is not working using this method or did you figure it out?
And also, do you have a link to the drivers you used off hand or what did you search for to find them?
Hippie459MN said:
I am assuming the camera is not working using this method or did you figure it out?
And also, do you have a link to the drivers you used off hand or what did you search for to find them?
Click to expand...
Click to collapse
Nope, still haven't gotten the camera working. We are missing some config files still. Do you need the camera drivers or the tablet drivers?
The camera drivers are : sp2518 and sp0838, though I also see a module being loaded called cam_detect
I don't recall where I got the adb usb drivers for the tablet, but it would probably be a good thing to mention in this thread so if you have them, let me know and I can add it to one of the top posts. If you're having trouble finding them, I'll remove my drivers and go back through the process to find them again.
Looking for the tablet drivers. I am about ready to tap out on this thing for a while. lol Its driving me crazy.
Hippie459MN said:
Looking for the tablet drivers. I am about ready to tap out on this thing for a while. lol Its driving me crazy.
Click to expand...
Click to collapse
OK. The drivers I used were probably: VID_1f3a_PID_efe8 (or something similar)
You can either google that or try downloading the firmware for TP718AQ here: http://www.agptek.com/forum/viewtopic.php?f=22&t=948
Remove all prior drivers for the tablet. Plug it in and tell Windows to use the drivers from the extracted file you download (Will extract to TP718AQ_Update_Firmware\USB Driver).
Sometimes I have to do a little dance with restarting the device and my computer to get it to recognize it.
As a last resort you could try this: http://www.xda-developers.com/andro...r-solves-your-adb-driver-problems-on-windows/
Let me know if you have any problems.
Good Luck!
Ok, I officially give up trying to root this thing. Stupid windows will not install the drivers in both the links you provided and I cant get windows to even try to install anything after removing them then I got the android ADB drivers to install but still zero luck. All rooting apps fail. Hopefully someone will post the image of their rooted NB07. A few claim to have rooted it just fine but I cant win with this thing.
All I want is to be able to run link2sd and a few other apps that require root. This is officially the longest I have owned an un-rooted android device. lol
I'm the one that got the root working using kingo, so for the drivers the easiest method is just using Top Notch Tablets How to install ADB drivers ( I would post a link but I don't have 10 posts yet on XDA)
That worked on the first one, the second one it didn't not entirely sure why, but you can send a email to support and ask them for development drivers for the nobis tablets and they will send the ADB drivers you need. After you have the drivers installed use kingo while the tablet is in usb debug mode BEFORE plugging it into your usb port and do not turn on usb transfer. the first time after it reboots kingo will report that it was not rooted, leave it plugged in and power off and back on and it should report the root worked. This method gives you SuperSU. Both times I've done this were for clients of mine but its pretty straight forward.
Well, I have decided that for now this tablet of mine is un-rootable. I must have tried with 5 or 6 different drivers about 20 times with each with Kingo. I even tried that other program that is all in Chinese that loads some BS app on to your phone with no luck. So, for now, I am going to give up but if anyone has any other ideas or wants me to try something or they have for sure figured out how to root it, let me know as I am happy to help the best I can.
Edit: Oh yeah, Dont know how much this will help anyone but here is some more specific specs on the Nobis NB07 tablet I pulled off it with Hardware Info 3.0.0. Feel free to put the link in the first or second post if you want. Maybe it will help a little bit more.
http://www.hippie459mn.com/nobis_nb07/index.html
:good:
Hippie459MN said:
Well, I have decided that for now this tablet of mine is un-rootable. I must have tried with 5 or 6 different drivers about 20 times with each with Kingo. I even tried that other program that is all in Chinese that loads some BS app on to your phone with no luck. So, for now, I am going to give up but if anyone has any other ideas or wants me to try something or they have for sure figured out how to root it, let me know as I am happy to help the best I can.
Edit: Oh yeah, Dont know how much this will help anyone but here is some more specific specs on the Nobis NB07 tablet I pulled off it with Hardware Info 3.0.0. Feel free to put the link in the first or second post if you want. Maybe it will help a little bit more.
http://www.hippie459mn.com/nobis_nb07/index.html
:good:
Click to expand...
Click to collapse
Thanks to the work of someone on another forum, I have now got TWRP working on our device and am hoping we will soon have a CM working on it as well. Check back in the near future for further details. Maybe if you can't have a rooted stock, we can get a fully functional CM.
I am assuming you need to have root to flash the TWRP recovery correct. This is good news. Would love to have more info on it. Are you working with people on this site or another site? I would love to follow along.
Hippie459MN said:
I am assuming you need to have root to flash the TWRP recovery correct. This is good news. Would love to have more info on it. Are you working with people on this site or another site? I would love to follow along.
Click to expand...
Click to collapse
On another site for now. Just PM's at the moment so not much to follow yet. But, all you'll need is the Phoenixsuit to install it, so you won't have to root your tab first. You'll have root on the new ROM. You'll have to have drivers fully working though. Once fully working I'll link to the site so people can get the files and hopefully we can get this guy some donations for his work.
Awesome! I would go right to CM on this and skip the whole rooting the stock firmware. Would be nice to be able to root the stock firmware though then things would be so much easier. Think the camera will be working on the CM build? If not no big deal but would be nice to have them working.
Keep me (us) posted on the progress.
Hippie459MN said:
Awesome! I would go right to CM on this and skip the whole rooting the stock firmware. Would be nice to be able to root the stock firmware though then things would be so much easier. Think the camera will be working on the CM build? If not no big deal but would be nice to have them working.
Keep me (us) posted on the progress.
Click to expand...
Click to collapse
Not sure about the camera yet. I have CM booting but no touch yet, so this will be the first task. I'll keep everyone posted.
Any word on getting things to work yet?
Currently, we have CM working with no touch screen/camera. I'm not sure what else all isn't working because I'm waiting on my OTG cable to come in for further testing to see what all is going to be required to get the touchscreen going. Right now, it appears we my be looking at compiling our own drivers which could take some time to do. I think we'll get it eventually, but it may take some time. If you don't need touchscreen or camera, it could be working right now.
Sorry for no updates for a while. My work has been delayed on this since I have a son who is sick and in the pediatric ICU. I'll get back to work when things calm down for me.
No worries man. Family first.
Just a question, Hippie...
On the original ROM, can you see your device in ADB? If you can, and type "adb shell" do you get root? If you have adb access but not root, can you try typing sh and see what happens?
Also, could you try loading the rootfromOTA.zip and see if you can get a printout of the error log if possible?
Also, I tried installing this from the recovery on a similar ROM and it acted like it failed. I went back into the ROM and used adb and was able to get root using vroot or kingo...I don't remember which. This may be worth a shot.
Interestingly, I have been looking for alternative ways to root and found this (but we need to find a way to get to the bootloader):http://whiteboard.ping.se/Android/Rooting
I think that the method to get to bootloader is to turn off the tablet, then hold down the back button while tapping the power button 5 times. But, I also googled and found a method for getting to fastboot from adb in android without root as well which may work.
Hi all, a few months ago i had a perfectly running rooted TF101 with stock asus firmware. It has CWM recovery v6.0.1.3 and i had the CWM app installed.
somewhere along the timeline i decided it was a good idea to backup the whole thing using the CWM app just in case anything funny happens. Now don't ask me how or why it went the way it did, but the CWM app seemingly performed its backup, there was a disclaimer warning somewhere about possibly losing root access, to which i think i said "yes", the device rebooted and my entire image was gone - only left with CWM recovery mode.
I have been trying to reflash it with stock recovery image, but the SD card won't mount. I am also unsure whether i still have root access or not.
in terms of connectivity, all i was able to get back was ADB access, which i was able to search xda and find threads such as these to try and fake an sdcard then reflash
https://forum.xda-developers.com/showthread.php?t=911228
I've tried katkiss image and stock image but everytime i get a status 7 error or an error 21
https://forum.xda-developers.com/nexus-6p/help/zip-file-signature-verification-error-t3561054
https://www.**********.com/fix-status-7-error-while-installing-ota-update-or-roms/
I'm not exactly an ADB crackhead and I'm not able to get past it so i've searched some more and found on xda again threads on using EasyFlasher, I've followed the instructions but can't get the APX drivers installed on windows 10.
https://forum.xda-developers.com/showthread.php?t=1688012
basically, at this stage i've read many articles, many posts, none have worked because links are outdated or instructions are outdated and mostly i'd rather stop trying all i am finding without really understanding before i brick this device for good out of ignorance.
sure it's old but it was functioning properly and was being used actively by my kids. if i can get it back to life, that'd be nice.
has someone experienced (and fixed) something similar or feel can contribute to unbricking my device?
Thanks guys.
I'm a noob myself, but I managed to get the APX driver installed on Win 10 (just now) by following the directions at how to geek dot com. I used "Option two: Use an Advanced Boot Option."
Good luck!