Related
i need some help rooting my strat i been following this guide http://rootzwiki.com/topic/7840-kernel-guide-root-your-stratosphere/
and i already flashed the kernel already and im on the part where u need to put your phone into usb debugging and so i plug my phone in and let it install its drivers and then i open up CMD in windows and i copy and paste this command F:\Downloads\heimdall-suite-1.3.1-win32>adb devices
to see if it detects my device and it just says device not ready... soo that is where i am stuck at i have downloaded and installed android sdk and did the updates with it and i close out of it and then do the same thing in cmd and still says device not ready..... im lost
i placed android sdk under the root of my C drive called android im running windows 7 64bit
redid the WHOLE walkthrough went and reinstalled adk, and re doing the kernel file to the phone and now im back at the same part but now i get this, there is no disk in the drive please insert a disk into the drive /device/harddisk2/DR2.
and all i get is cancel try again and continue and when i do it again its the same thing..... it seems this is just a simple thing but being stupid
ill donate 15$ to who ever helps me and completes this with me lol
good job? lol didnt do anything
Did u get it I'm in the middle of rooting mmine. Still seting up adb on new laptop.
yea im still stuck BUT someone on a different forum gave me this http://rootzwiki.com/topic/9711-untested-odin-for-stratosphere/ but im a little scared to test this because this is the only phone i have
rooting thur odin right now.... wish me luck
well that didnt work and bricked
does anyone have the stock files to odin back to stock?
.
Thread moved. Would advise you to read forum rules and post in correct section.
Failure to comply with forum rules will result in an infraction and/or ban depending on severity of rule break.
I can't seem to find a Clockwork Recovery install anywhere and was wondering what the progress was in the port? I seen that someone posted they were working on it on the root thread and need to know if any updates on it? I know there are a ton of people that won't go without a slider and seeing as this phone is the only 4g slider right now I figured there would be all kinds of rom support for it. Its unlocked bootloader was the reason i got it along with my fiancee's need for a keyboard. First time i seen any android device without cwr.
cydetrakd said:
I can't seem to find a Clockwork Recovery install anywhere and was wondering what the progress was in the port? I seen that someone posted they were working on it on the root thread and need to know if any updates on it? I know there are a ton of people that won't go without a slider and seeing as this phone is the only 4g slider right now I figured there would be all kinds of rom support for it. Its unlocked bootloader was the reason i got it along with my fiancee's need for a keyboard. First time i seen any android device without cwr.
Click to expand...
Click to collapse
Ill donate to a dev who doesnt have the phone buts wants to dev
Sent from my SCH-I405 using Tapatalk
samsung stratosphere trouble!!
Hi everyone. I was looking for some help to fix the samsung stratosphere that i tried rooting the other day. I will explain to the best of my knowledge as to what i did and how i got where i am with trying to root my phone and where i believe things went bad. i downloaded heimdall and all the necessary files that i got off of the rootzwiki forum specifically for rooting this phone. I was following the instructions exactly as they are posted. Well i than tried to use a different method within heimdall called heimdall - front end. i tried flashing the kernel from the rootzwiki forum using this method. i loaded the stratosphere.pit and went to the flash menu and checked repartition and reboot phone and clicked flash. Thats where the trouble began,now it seems that my phone is stuck in a bootloop,where it will either go to the screen where it asks if you wanna flash a custom rom or it will go into recovery mode if i try to reboot the phone. When my phone is plugged in, it dont show thats its charging but the power button will work sometimes or i just have to hold the power and volume down button and it will go to the custom rom screen. If anyone could help me figure this out,it would be greatly appreciated and thanks in advance for any help or advice on my situation.
Hi guys,
I am new to the forum and in need of considerable help.
I have a Tmobile Galaxy S 4g (not the SII). I had previously upgrade the phone to gingerbread 2.3.6, but last night I was trying to root it again to do a lag fix.
Unfortunately, I think I used the wrong root file - I used something for Galaxy S GT-19000. Now, whenever I try to start the phone it just switches back and forth from the Tmobile Galaxy S screen to the Galaxy S GT-19000.
I used ODIN to root it, and now I desperately need to return it to factory settings. Can anyone help?
I tried looking for original factory firmware, but I can only find it for the Galaxy SII. Would that even work?
Thanks - I would appreciate any help I can get!
Yeah, you flashed something for the Vibrant. If you have Java installed on your computer, then check out bhundven's Heimdall One-Click collection. The first one listed is pure stock. The 3rd one comes with a modded kernel, CWM, root, and voodoo lagfix.
Click the second link in my signature, follow the guide and you will good to go.
lumin30 said:
Click the second link in my signature, follow the guide and you will good to go.
Click to expand...
Click to collapse
This is just a thought. Some people have signatures turned off. Maybe posting that link would be better. I recently turned them off because of a user that used the largest font available to ask people to suggest a phone for his birthday...yes you read that correct.
I put it in my signature for when I am on the XDA app. Haven't had one person mention not finding the link yet so not worried about it.
lumin30 said:
I put it in my signature for when I am on the XDA app. Haven't had one person mention not finding the link yet so not worried about it.
Click to expand...
Click to collapse
No worries this is the first time I happened to notice I didnt see your signature.
Hi guys,
Thanks for the help, but something doesn't seem to be working.
After I enter Zadig and install the driver, I close the zadig window. Then the instructions say to 'flash' once again in Heimdall, and then wait for the android to reboot.
However, nothing is happening. when I flash once again in Heimdall, it just takes me back to zadig to reinstall the drivers all over again. It seems to just be a loop. Am I doing something wrong?
I don't even get to these steps below:
1. When Heimdall One-Click is finished working - your phone will reboot. Linda will start speaking to you. Now you wait.
2. Wait longer - you will sit at the Galaxy S 4G splash screen while waiting.
3. When Linda is finished working her magic - you will hear her say [Voodoo Lagfix is now activated].
unluckyleen said:
After I enter Zadig and install the driver, I close the zadig window. Then the instructions say to 'flash' once again in Heimdall, and then wait for the android to reboot.
Click to expand...
Click to collapse
You are reading the instructions correctly. After installing drivers it says -
Close Zadig window.
Now back in Heimdall One-Click - select [flash] and wait.
The part you quoted were the directions for after flashing bootloaders.
I recommend you start over - read the directions once - then read them again. The directions and pictures make it very clear. If something is not happening the way it says - and/or Heimdall One-Click hangs up - close it down, reboot your your computer and as I said - start over from the beginning.
Hi Lumin,
Thanks for the help - I'm following the instructions exactly, and I've rebooted my computer. I'm still having the same problem.
After I close Zadig, and then I click flash again in Heimdall. All it does is take me back in zadig to reinstall the drivers.
when I'm in zadig, I have the option of 3 drivers. Could this have something to do with it?
Thanks
Ok - scratch that, I figured it out. I needed to install the winusb drivers, once I did that it was perfect.
If I followed this process completely, do I now have voodoolag fix?
I'm not sure what it means to flash bootloaders - was that needed to get voodoolag fix?
Thanks!
Yes you have Voodoo Lagfix. The guide when yoj need to flash bootloaders. If you get a rainbow screen when you boot your phone - you need to flash bootloaders. If your were on Gingerbread 2.3.6 before your started the guide - you don't need to flash bootloaders.
Hello Lumin, does this methord can work on other Android phone?
Unfortunately not. It was made for the Galaxy S 4G SGH-T959V. Sorry.
Before anyone tells me to use the search, I already did. There is no forum for my phone specifically, and what few posts I have found that even remotely relate to my issue have been dead for over 3 months and I was not sure how you felt about resurrecting them.
Phone info: LG Venice (LG-LG730), Carrier: Boost Mobile, OS: Android 4.0.4
What I have done so far: I was on another help site(so far not so helpful) and several people have reported success in rooting their Venice following THIS tutorial. I have had no luck following said tutorial. Every time I get to the part where it shows the "restore, yes or no" part (can be found at 13:50 in the video tutorial), and when I click yes to restore, the phone says "starting restore.... restore finished" or something similar, but never actually reboots, and nothing shows up in the CMD window. Now I know that I have never set any encryption passwords, and I verified that these options were turned off in the phone settings.
I have also tried Super One Click, for what its worth, and keep getting stuck on "step 7: waiting for device"
If anyone has any information on how I can easily root this phone, I would be most appreciative. I say "easy" way because I AM totally new to rooting and I don't want mess something up. I apologize ahead of time if I posted this in the wrong area.
Thank you in advance.
L3
L3thal1ty said:
Before anyone tells me to use the search, I already did. There is no forum for my phone specifically, and what few posts I have found that even remotely relate to my issue have been dead for over 3 months and I was not sure how you felt about resurrecting them.
Phone info: LG Venice (LG-LG730), Carrier: Boost Mobile, OS: Android 4.0.4
What I have done so far: I was on another help site(so far not so helpful) and several people have reported success in rooting their Venice following THIS tutorial. I have had no luck following said tutorial. Every time I get to the part where it shows the "restore, yes or no" part (can be found at 13:50 in the video tutorial), and when I click yes to restore, the phone says "starting restore.... restore finished" or something similar, but never actually reboots, and nothing shows up in the CMD window. Now I know that I have never set any encryption passwords, and I verified that these options were turned off in the phone settings.
I have also tried Super One Click, for what its worth, and keep getting stuck on "step 7: waiting for device"
If anyone has any information on how I can easily root this phone, I would be most appreciative. I say "easy" way because I AM totally new to rooting and I don't want mess something up. I apologize ahead of time if I posted this in the wrong area.
Thank you in advance.
L3
Click to expand...
Click to collapse
FWIW I just rooted both my and my wife's LG Venice phones.
I used http://forum.xda-developers.com/showthread.php?t=1886460 and then method 3 instead of 1 which has worked for others.
android 4.0.4
kernel 3.0.8
build IMM76L
software LG730ZV5
I did try method 1 first and it may be that the two need to be stacked for all I know at present, I will be resetting one phone to factory and trying fresh with method 3 as soon as her 8g SD is ready to go.
I've tried using different versions of Bin4ry's root and none of them work. Im running 4.0.4
Sent from my LG-LG730 using xda app-developers app
Leviathan9569 said:
I've tried using different versions of Bin4ry's root and none of them work. Im running 4.0.4
Sent from my LG-LG730 using xda app-developers app
Click to expand...
Click to collapse
On a friends phone, also a Venice (boostmobile) we had some insanity as described below.
The final root check stalled, and we finally stopped the script that was waiting for something for most of a day.
A quick check from the ADB said we had root, and I could get the # prompt and do what I wanted, see the supersu and busybox from the rooting, etc..
Two reboots later, after adding titanium backup, supersu, and stericson-busybox from the play store (or what ever the name is today) everything went swimmingly, and even the problems I had noticed with some audio and video codecs not working had resolved themselves.
I am not sure what version of the rooter from bin4ry we used on mine and my wife's, but on our friend's we used the newest at the time he downloaded which was v25
Alright, i'll try it out. Thank you
You wouldn't by chance have the file on hand would you? I can't seem to find v25
Sent from my LG-LG730 using xda app-developers app
Root Issues Lg 730
:cyclops: Hi XDA... I have an issue also with the Lg730 Venice or (Sol) I have a repeat client that is always coming up with new phones, and keeps me busy rooting, custom flashing, (in general Modding) all his little toys.. I rooted his Lg 730 last yr with adb (Ubuntu12.04) by using the usual push/mount/chmod/install.. This system has worked for me many times, including but not limited to Clone S3's , Clones S2(Chinese) Droids of all flavors, yet with this New OTA 4.1.2 my client lost the previoius Root (I did not flash CustomRom at that time) . I have SERIOUSLY ,tried every method that I know of. Binary's(thanks Binary) which i have used a few times(Donator here) does not seem to work this time. GingerBreak/Psneuter/Fastboot/Rageagainsthecage/Odin/Heimdall (yes i even tried Samsung designs) Nothing works on this new OTA for me. Upgraded to RaringRingtail thinking i was out of date , to my dismay Nothing... I cannot get Root. Fastboot does not pickup device(all drivers in place(Ubuntu/Windows) My biggest challenge ever. I BOUGHT this phone (not because i like it) but for personal reasons. There is limited support for this device. I would like those who read this forum to know, that I AM going to dedicate my spare TIME on the Lg730 Venice from this day on. I have reset BoostMobile Factory settings , taken the stock boot.img , pulled the system, , rooted it, busybox'd it, with run support, zipaligned, added a couple of my favorite apk's,changed the bootanimation, zipped it,(7zip)... Essentially STOCK, with ROOT... I cannot run this on my Device(NO ROOT) but if any1 is interested its ready for flashing... I AM IN NO WAY RESPONSIBLE IF YOU BRICK YOU DEVICE... I will speak to a Moderator before i post link so as to get XDA Forum rules advice first. I take no credit , and i give it all (J.Rummy) (Chainfire)(XDA Developers)(Dsixda)(Koushik Dutta)(Exploid-Crew)for without them many things could not be possible....
Leviathan9569 said:
Alright, i'll try it out. Thank you
You wouldn't by chance have the file on hand would you? I can't seem to find v25
Sent from my LG-LG730 using xda app-developers app
Click to expand...
Click to collapse
I do not have it on hand, and we both semi-accidentally OTA upgraded to jellybean when the prompts got too annoying and lost root all together.
IF you manage to achieve root, best to use OTA rootkeeper BEFORE you upgrade, looks like now I have to use kdz tools and downgrade to v5, root, rootkeeper, and hope I can keep root :/
---------- Post added at 10:48 PM ---------- Previous post was at 10:17 PM ----------
X-Modder-X-Root-Seattle said:
:cyclops: Hi XDA... [deletia] I have reset BoostMobile Factory settings , taken the stock boot.img , pulled the system, , rooted it, busybox'd it, with run support, zipaligned, added a couple of my favorite apk's,changed the bootanimation, zipped it,(7zip)... Essentially STOCK, with ROOT... I cannot run this on my Device(NO ROOT) but if any1 is interested its ready for flashing... I AM IN NO WAY RESPONSIBLE IF YOU BRICK YOU DEVICE... I will speak to a Moderator before i post link so as to get XDA Forum rules advice first. I take no credit , and i give it all (J.Rummy) (Chainfire)(XDA Developers)(Dsixda)(Koushik Dutta)(Exploid-Crew)for without them many things could not be possible....
Click to expand...
Click to collapse
I would be interested in your theory cyclops. Possibly even in using yours over mine.
I am currently playing with doing much the same thing on a .cab formatted ROM then using the KDZ tool to push the modified v8 ROM (Jelly Bean 4.1.2) and pray I am good as I was when I was a kid
LG730 Venice
Unfortunately i have been unsucessful in Rooting this LG. Very frustrating.. I hope you achieve your goal. Best wishes.... I have also provided an email i can be contacted at directly [email protected] If this helps, and if you are able to sideload, or able to flash its ready to go.
.EDITING EDITING
Sucessfully rooted LG Venice 730 today ...... Whoo Hooo......... Flash regess from JB ZV8 to ZV5 or 6 with KDZ tools........ Rooted with Binary's new v31 and ran #1.... Remember to put Binary's root method on Root of C: drive. open command prompt c:.\RunMe and follow instructions....... Unfortunately I am unable to flash roms or mods due to ootloader Lock??????????
Its a pity .... 1 downfall after another......... Cant get past it .... Bootstrap or Safestrap maybe ??????/Any suggestions ?????
Rooting instructions
L3thal1ty said:
Before anyone tells me to use the search, I already did. There is no forum for my phone specifically, and what few posts I have found that even remotely relate to my issue have been dead for over 3 months and I was not sure how you felt about resurrecting them.
Phone info: LG Venice (LG-LG730), Carrier: Boost Mobile, OS: Android 4.0.4
What I have done so far: I was on another help site(so far not so helpful) and several people have reported success in rooting their Venice following THIS tutorial. I have had no luck following said tutorial. Every time I get to the part where it shows the "restore, yes or no" part (can be found at 13:50 in the video tutorial), and when I click yes to restore, the phone says "starting restore.... restore finished" or something similar, but never actually reboots, and nothing shows up in the CMD window. Now I know that I have never set any encryption passwords, and I verified that these options were turned off in the phone settings.
I have also tried Super One Click, for what its worth, and keep getting stuck on "step 7: waiting for device"
If anyone has any information on how I can easily root this phone, I would be most appreciative. I say "easy" way because I AM totally new to rooting and I don't want mess something up. I apologize ahead of time if I posted this in the wrong area.
Thank you in advance.
L3
Click to expand...
Click to collapse
I have tried to use this page/post to root my LG 730 Venice (Android 4.1.2 Software LG 730ZV8). I have downloaded & installed everything but keep getting ERROR messages at the end. Does anyone have detailed instructions on how to install/use bin4ry v31.zip ??
I am almost sure that it would eliminate these errors. I have been using Linux now for over 10 years and this process should be child's play.
Thanks in advance for any help.
Not much info to go on Mike , but here goes, first but not least...... LG730ZV8 package is not rootable.... You need to first downgrade from the LG730ZV8 to LG730ZV5 using LG Tool 500 method... (.cab format from here--> ) http://csmgdl.lgmobile.com/swdata/WDLSW/LG730/ABMUSV/LG730ZV5_01/LG730ZV5_01.S5_00.P61009.cab ... Follow instructions to the letter, and do not miss any steps....... I think its an easier way using the tools but if your a DIY kinda guy , the KDZ method is a little more complex , but rewarding in the end , more so than The 500 Tool simply said , because if your a little like me, i flash many different OS's for the fun of it, and the KDZ method will truely always work when the Tool wont..... Now the KDZ method you can find Here --------------->----------->---------------------->-----------------------------------------------------> http://forum.xda-developers.com/showthread.php?t=1287236.... If you have any problems or questions give4 a shout and i will try to guide you through it ...... Good luck Mike
Ps...... The trick to getting Binary's Root method to work is to put it on Root (c:\Binary.... etc...etc ) go to file press shift and right click to open cmd prompt... Type c:\RunMe ... Choose method #1 restore twice ,reboot 3x and Rooted..
---------- Post added at 09:53 PM ---------- Previous post was at 09:23 PM ----------
X-Modder-X-Root-Seattle said:
Not much info to go on Mike , but here goes, first but not least...... LG730ZV8 package is not rootable.... You need to first downgrade from the LG730ZV8 to LG730ZV5 using LG Tool 500 method... (.cab format from here--> ) http://csmgdl.lgmobile.com/swdata/WDLSW/LG730/ABMUSV/LG730ZV5_01/LG730ZV5_01.S5_00.P61009.cab ... Follow instructions to the letter, and do not miss any steps....... I think its an easier way using the tools but if your a DIY kinda guy , the KDZ method is a little more complex , but rewarding in the end , more so than The 500 Tool simply said , because if your a little like me, i flash many different OS's for the fun of it, and the KDZ method will truely always work when the Tool wont..... Now the KDZ method you can find Here --------------->----------->---------------------->-----------------------------------------------------> http://forum.xda-developers.com/showthread.php?t=1287236.... If you have any problems or questions give4 a shout and i will try to guide you through it ...... Good luck Mike
Ps...... The trick to getting Binary's Root method to work is to put it on Root (c:\Binary.... etc...etc ) go to file press shift and right click to open cmd prompt... Type c:\RunMe ... Choose method #1 restore twice ,reboot 3x and Rooted..
Click to expand...
Click to collapse
:cyclops:
More Info
X-Modder-X-Root-Seattle said:
Not much info to go on Mike , but here goes, first but not least...... LG730ZV8 package is not rootable.... You need to first downgrade from the LG730ZV8 to LG730ZV5 using LG Tool 500 method... (.cab format from here--> ) http://csmgdl.lgmobile.com/swdata/WDLSW/LG730/ABMUSV/LG730ZV5_01/LG730ZV5_01.S5_00.P61009.cab ... Follow instructions to the letter, and do not miss any steps....... I think its an easier way using the tools but if your a DIY kinda guy , the KDZ method is a little more complex , but rewarding in the end , more so than The 500 Tool simply said , because if your a little like me, i flash many different OS's for the fun of it, and the KDZ method will truely always work when the Tool wont..... Now the KDZ method you can find Here --------------->----------->---------------------->-----------------------------------------------------> http://forum.xda-developers.com/showthread.php?t=1287236.... If you have any problems or questions give4 a shout and i will try to guide you through it ...... Good luck Mike
Ps...... The trick to getting Binary's Root method to work is to put it on Root (c:\Binary.... etc...etc ) go to file press shift and right click to open cmd prompt... Type c:\RunMe ... Choose method #1 restore twice ,reboot 3x and Rooted..
---------- Post added at 09:53 PM ---------- Previous post was at 09:23 PM ----------
:cyclops:
Click to expand...
Click to collapse
I went into the folder that I extracted the bin4ry file download to and found two other folders:stuff and z_rootkit.. Inside the "stuff" folder I found abd.exe & dlls, busybox, fastboot, glass, install recovery, root me.tar (Linux), rootkittablet.tar.gz Linux), su and superuser.apk.. Now some of the ERROR messages had references to ABD and missing .dlls which were apparently not installed. This where I believe this prog hung up but I have no idea why.
The other folder "z_rootkit" had getroot scripts (.sh) and usbux.ab. I am guessing but I am assuming these might be needed too.
When I extracted to folder bin4ry, there were no other instructions to install from these folders.
This why I was asking for an install instruction file to get all this done.
Hope this helps in the solution !!
Hi Mike ...:cyclops: This will help you out..... You have the right package I believe.. Not sure why its giving you the dll errors... that could possibly be SDK or ADB not installed correctly via path to directory... Check it. Possibly deprecated download file. Too many too list in Windows... Gotta love Ubuntu........ Try downloading Binary's Root by Restore again... open downloads , -> drag n drop file to local c (root) set permissions-> Unzip it . open File . press shift on keyboard while also right clicking pointer, and it will bring up command prompt . Type ( .\RunMe ) in prompt...... When it opens select # (1) follow prompts to Backup---> Restore---> ADB will reboot ---once----twice and android will upgrade ... Let it finish. (3) Third reboot pull plug ---> grant permissions to Superuser or SuperSU on popup... Rooted.... I am assuming you downgraded to LG730ZV5 or LG730ZV6 already....... if there are any problems , or if you have questions let me know......
What to download ??
mikeyatl10 said:
I went into the folder that I extracted the bin4ry file download to and found two other folders:stuff and z_rootkit.. Inside the "stuff" folder I found abd.exe & dlls, busybox, fastboot, glass, install recovery, root me.tar (Linux), rootkittablet.tar.gz Linux), su and superuser.apk.. Now some of the ERROR messages had references to ABD and missing .dlls which were apparently not installed. This where I believe this prog hung up but I have no idea why.
The other folder "z_rootkit" had getroot scripts (.sh) and usbux.ab. I am guessing but I am assuming these might be needed too.
When I extracted to folder bin4ry, there were no other instructions to install from these folders.
This why I was asking for an install instruction file to get all this done.
Hope this helps in the solution !!
Click to expand...
Click to collapse
Just got everything cleaned up and am now ready to do this thing. Went to KDZ but don't know which prog to download plus I don't have B2C on my LG730.
Please let me know where I might find everything I will need to get it done.
Thanks
Progress Rooting LGE 730
I wish someone would teach all the Windows people that they are dealing with a MF trash bin OS. I have been fighting Win Updates. getting MS Active Sync installed etc. I have never in my life seen such idioatic crap in my life, There HAS TO BE AN EASIER way to root an LGE 730 (Venice) phone. If someone has such info please let me know because using the KDZ method is maniacal at best, I am ready to trash this piece of CR** phone. It CANNOT BE THIS TOUGH TO DO !
mikeyatl10 said:
I wish someone would teach all the Windows people that they are dealing with a MF trash bin OS. I have been fighting Win Updates. getting MS Active Sync installed etc. I have never in my life seen such idioatic crap in my life, There HAS TO BE AN EASIER way to root an LGE 730 (Venice) phone. If someone has such info please let me know because using the KDZ method is maniacal at best, I am ready to trash this piece of CR** phone. It CANNOT BE THIS TOUGH TO DO !
Click to expand...
Click to collapse
:highfive: Its definately a tough model to crack for sure..... Mike check your PM........ :cyclops:
mikeyatl10 said:
I wish someone would teach all the Windows people that they are dealing with a MF trash bin OS. I have been fighting Win Updates. getting MS Active Sync installed etc. I have never in my life seen such idioatic crap in my life, There HAS TO BE AN EASIER way to root an LGE 730 (Venice) phone. If someone has such info please let me know because using the KDZ method is maniacal at best, I am ready to trash this piece of CR** phone. It CANNOT BE THIS TOUGH TO DO !
Click to expand...
Click to collapse
Use the app on this thread. LGPwn.apk. Follow my instructions at the end of the thread. If it works (which i confirmed) a simple thanks button click will do.
http://forum.xda-developers.com/showthread.php?t=2338816
Root
Crossvxm said:
Use the app on this thread. LGPwn.apk. Follow my instructions at the end of the thread. If it works (which i confirmed) a simple thanks button click will do.
http://forum.xda-developers.com/showthread.php?t=2338816
Click to expand...
Click to collapse
:cyclops: thanks for the link :good:
X-Modder-X-Root-Seattle said:
:cyclops: thanks for the link :good:
Click to expand...
Click to collapse
No problem
LGPwn.apk
Crossvxm said:
No problem
Click to expand...
Click to collapse
:victory:This LGPwn.apk is the bomb...... I very much appreciate this new JB root method..... Confirmed works on LG730 Venice.....:highfive:...... Deleted root ,installed LGPwn.apk ...... ran exploit...... ROOTED .....:highfive: Awesome for job well done :victory: Yeahhh.....:cyclops:
X-Modder-X-Root-Seattle said:
:victory:This LGPwn.apk is the bomb...... I very much appreciate this new JB root method..... Confirmed works on LG730 Venice.....:highfive:...... Deleted root ,installed LGPwn.apk ...... ran exploit...... ROOTED .....:highfive: Awesome for job well done :victory: Yeahhh.....:cyclops:
Click to expand...
Click to collapse
Don't forget the SuperSU app for the root binaries and superuser requests!
Tech Specs:
Processor Type: Quad-Core Cortex A9 Processor(When I turn on the tablet it says Allwinner A31?)
Processor Speed: 1.20 GHz
System Ram: 1 GB
Hard Drive Size: 8GB
Laptop Screen Size: 7 inch
Screen Type: Capacitive Touch Display
Battery Life: 4 hours
Battery Type: 2800mAh Lithium Ion
Network Connection: 802.11b/g/n Wireless LAN
Connector Type: 1 x HDMI, 1 x Headphone, 1 x MiniUSB 2.0
Operating System: Google Android
Accessories Included: AC Adapter,USB Cable
Operating System Version: Android 4.2 Jelly Bean
This thread is a continuation of some of the discussion that was from this thread: http://forum.xda-developers.com/showthread.php?t=2568427
While not at all high end tablets, it's always fun to see what can be squeezed out of them! As stated in the title, this thread will be regarding the following devices: Nobis NB07, Iview 774TPC, and DA-741QHD (which all appear to be the same hardware) rooting and ROMs. That should be pretty simple for now since, we currently have no ROMs and no proven root method. Some have reported success using the Kingoapp. If anyone is able to obtain root, we would like to ask that you make a copy of the firmware and upload it for those of us having trouble doing so. After doing so, we can modify it and hopefully get more our of the software.
You may also post information regarding tweaking the ROMs for these devices and other ways to make them more useful!
Warning: The following may have unforseen effects including breaking your tablet to the point of being unrepairable.
Option #1, Use KingoApp Some users have reported that this did not work for them, at least one user reported that it did.
Instructions per RawX:
For the drivers the easiest method is just using Top Notch Tablets How to install ADB drivers. That worked on the first one, the second one it didn't not entirely sure why, but you can send a email to support and ask them for development drivers for the nobis tablets and they will send the ADB drivers you need. After you have the drivers installed use kingo while the tablet is in usb debug mode BEFORE plugging it into your usb port and do not turn on usb transfer. the first time after it reboots kingo will report that it was not rooted, leave it plugged in and power off and back on and it should report the root worked. This method gives you SuperSU. Both times. I've done this were for clients of mine but its pretty straight forward.
Click to expand...
Click to collapse
The working drivers for me were: VID_1f3a_PID_efe8
Please consider trying this first and give us some feedback. A word of warning though, there has been some discussion on XDA in the past that this may be malware though I'm not sure this was ever confirmed.
Option #2, Flash firmware for an alternate device that can be rooted easily. Warning!!! Currently, there is no way to get back to stock (until someone who gets root with another method makes a copy of the firmware)
Go to this website: http://www.iviewus.com/firmware788TPC/ and download the firmware. Yes, it is for another tablet. However, the tablet appears to have the same specs as ours. Once downloaded. Install the included PhoenixSuit software. Once it is running, click the button at the bottom right to update the software to the newest version (this may not be required). Then, plug in your tablet using the usb port and install the drivers. I used google and found them all within minutes. Once the software recognizes your tablet go to the firmware tab where you have extracted the .img file and select the file. Next, click upgrade to upgrade your tablet (it has instructions to help your tablet be recognized if you are having difficulty). Once the new firmware has been flashed, then download the file RootFromOTA.zip that can be found on various places such as XDA. Move the file onto an external SD card. Then, go to settings -> backup & reset -> Recovery Mode. Your tablet will restart. Once it does, select the bottom option to install from SD card. Install the RootFromOTA.zip and then reboot. Once rebooted, install the supersu app or another root application of your choice.
Credits: As above to RawX
Congrats... You're rooted.
Mods
Currently, I've managed to get great battery life out of my tablet by installing kernel tuner and changing the settings as such:
Governor: Ondemand (default is fantasys)
Max: 1200 MHz (Default is 1200 MHz)
Min: 240 MHz (Default is 120 MHz, but I had trouble with usability at this setting and Ondemand)
I also recommend setting wifi to turn off when the screen is off and turn off autosync.
This seemed to give me a very useable system but with greatly improved battery life. Doing the above and a few other tweaks here and there have made my battery life so that it drains by about 1% overnight when not in use. I also seem to get better battery life while using the tablet. I haven't had any trouble playing games either.
neatojones said:
Option #2, Flash firmware for an alternate device that can be rooted easily. Warning!!! Currently, there is no way to get back to stock (until someone who gets root with another method makes a copy of the firmware)
Go to this website: http://www.iviewus.com/firmware788TPC/ and download the firmware. Yes, it is for another tablet. However, the tablet appears to have the same specs as ours. Once downloaded. Install the included PhoenixSuit software. Once it is running, click the button at the bottom right to update the software to the newest version (this may not be required). Then, plug in your tablet using the usb port and install the drivers. I used google and found them all within minutes. Once the software recognizes your tablet go to the firmware tab where you have extracted the .img file and select the file. Next, click upgrade to upgrade your tablet (it has instructions to help your tablet be recognized if you are having difficulty). Once the new firmware has been flashed, then download the file RootFromOTA.zip that can be found on various places such as XDA. Move the file onto an external SD card. Then, go to settings -> backup & reset -> Recovery Mode. Your tablet will restart. Once it does, select the bottom option to install from SD card. Install the RootFromOTA.zip and then reboot. Once rebooted, install the supersu app or another root application of your choice.
Congrats... You're rooted.
Click to expand...
Click to collapse
I am assuming the camera is not working using this method or did you figure it out?
And also, do you have a link to the drivers you used off hand or what did you search for to find them?
Hippie459MN said:
I am assuming the camera is not working using this method or did you figure it out?
And also, do you have a link to the drivers you used off hand or what did you search for to find them?
Click to expand...
Click to collapse
Nope, still haven't gotten the camera working. We are missing some config files still. Do you need the camera drivers or the tablet drivers?
The camera drivers are : sp2518 and sp0838, though I also see a module being loaded called cam_detect
I don't recall where I got the adb usb drivers for the tablet, but it would probably be a good thing to mention in this thread so if you have them, let me know and I can add it to one of the top posts. If you're having trouble finding them, I'll remove my drivers and go back through the process to find them again.
Looking for the tablet drivers. I am about ready to tap out on this thing for a while. lol Its driving me crazy.
Hippie459MN said:
Looking for the tablet drivers. I am about ready to tap out on this thing for a while. lol Its driving me crazy.
Click to expand...
Click to collapse
OK. The drivers I used were probably: VID_1f3a_PID_efe8 (or something similar)
You can either google that or try downloading the firmware for TP718AQ here: http://www.agptek.com/forum/viewtopic.php?f=22&t=948
Remove all prior drivers for the tablet. Plug it in and tell Windows to use the drivers from the extracted file you download (Will extract to TP718AQ_Update_Firmware\USB Driver).
Sometimes I have to do a little dance with restarting the device and my computer to get it to recognize it.
As a last resort you could try this: http://www.xda-developers.com/andro...r-solves-your-adb-driver-problems-on-windows/
Let me know if you have any problems.
Good Luck!
Ok, I officially give up trying to root this thing. Stupid windows will not install the drivers in both the links you provided and I cant get windows to even try to install anything after removing them then I got the android ADB drivers to install but still zero luck. All rooting apps fail. Hopefully someone will post the image of their rooted NB07. A few claim to have rooted it just fine but I cant win with this thing.
All I want is to be able to run link2sd and a few other apps that require root. This is officially the longest I have owned an un-rooted android device. lol
I'm the one that got the root working using kingo, so for the drivers the easiest method is just using Top Notch Tablets How to install ADB drivers ( I would post a link but I don't have 10 posts yet on XDA)
That worked on the first one, the second one it didn't not entirely sure why, but you can send a email to support and ask them for development drivers for the nobis tablets and they will send the ADB drivers you need. After you have the drivers installed use kingo while the tablet is in usb debug mode BEFORE plugging it into your usb port and do not turn on usb transfer. the first time after it reboots kingo will report that it was not rooted, leave it plugged in and power off and back on and it should report the root worked. This method gives you SuperSU. Both times I've done this were for clients of mine but its pretty straight forward.
Well, I have decided that for now this tablet of mine is un-rootable. I must have tried with 5 or 6 different drivers about 20 times with each with Kingo. I even tried that other program that is all in Chinese that loads some BS app on to your phone with no luck. So, for now, I am going to give up but if anyone has any other ideas or wants me to try something or they have for sure figured out how to root it, let me know as I am happy to help the best I can.
Edit: Oh yeah, Dont know how much this will help anyone but here is some more specific specs on the Nobis NB07 tablet I pulled off it with Hardware Info 3.0.0. Feel free to put the link in the first or second post if you want. Maybe it will help a little bit more.
http://www.hippie459mn.com/nobis_nb07/index.html
:good:
Hippie459MN said:
Well, I have decided that for now this tablet of mine is un-rootable. I must have tried with 5 or 6 different drivers about 20 times with each with Kingo. I even tried that other program that is all in Chinese that loads some BS app on to your phone with no luck. So, for now, I am going to give up but if anyone has any other ideas or wants me to try something or they have for sure figured out how to root it, let me know as I am happy to help the best I can.
Edit: Oh yeah, Dont know how much this will help anyone but here is some more specific specs on the Nobis NB07 tablet I pulled off it with Hardware Info 3.0.0. Feel free to put the link in the first or second post if you want. Maybe it will help a little bit more.
http://www.hippie459mn.com/nobis_nb07/index.html
:good:
Click to expand...
Click to collapse
Thanks to the work of someone on another forum, I have now got TWRP working on our device and am hoping we will soon have a CM working on it as well. Check back in the near future for further details. Maybe if you can't have a rooted stock, we can get a fully functional CM.
I am assuming you need to have root to flash the TWRP recovery correct. This is good news. Would love to have more info on it. Are you working with people on this site or another site? I would love to follow along.
Hippie459MN said:
I am assuming you need to have root to flash the TWRP recovery correct. This is good news. Would love to have more info on it. Are you working with people on this site or another site? I would love to follow along.
Click to expand...
Click to collapse
On another site for now. Just PM's at the moment so not much to follow yet. But, all you'll need is the Phoenixsuit to install it, so you won't have to root your tab first. You'll have root on the new ROM. You'll have to have drivers fully working though. Once fully working I'll link to the site so people can get the files and hopefully we can get this guy some donations for his work.
Awesome! I would go right to CM on this and skip the whole rooting the stock firmware. Would be nice to be able to root the stock firmware though then things would be so much easier. Think the camera will be working on the CM build? If not no big deal but would be nice to have them working.
Keep me (us) posted on the progress.
Hippie459MN said:
Awesome! I would go right to CM on this and skip the whole rooting the stock firmware. Would be nice to be able to root the stock firmware though then things would be so much easier. Think the camera will be working on the CM build? If not no big deal but would be nice to have them working.
Keep me (us) posted on the progress.
Click to expand...
Click to collapse
Not sure about the camera yet. I have CM booting but no touch yet, so this will be the first task. I'll keep everyone posted.
Any word on getting things to work yet?
Currently, we have CM working with no touch screen/camera. I'm not sure what else all isn't working because I'm waiting on my OTG cable to come in for further testing to see what all is going to be required to get the touchscreen going. Right now, it appears we my be looking at compiling our own drivers which could take some time to do. I think we'll get it eventually, but it may take some time. If you don't need touchscreen or camera, it could be working right now.
Sorry for no updates for a while. My work has been delayed on this since I have a son who is sick and in the pediatric ICU. I'll get back to work when things calm down for me.
No worries man. Family first.
Just a question, Hippie...
On the original ROM, can you see your device in ADB? If you can, and type "adb shell" do you get root? If you have adb access but not root, can you try typing sh and see what happens?
Also, could you try loading the rootfromOTA.zip and see if you can get a printout of the error log if possible?
Also, I tried installing this from the recovery on a similar ROM and it acted like it failed. I went back into the ROM and used adb and was able to get root using vroot or kingo...I don't remember which. This may be worth a shot.
Interestingly, I have been looking for alternative ways to root and found this (but we need to find a way to get to the bootloader):http://whiteboard.ping.se/Android/Rooting
I think that the method to get to bootloader is to turn off the tablet, then hold down the back button while tapping the power button 5 times. But, I also googled and found a method for getting to fastboot from adb in android without root as well which may work.
hey everyone, im new here, just got a Samsung s8+ last week. had it rooted and all working well until today, had problems so i went to reflash twrp and when was unticking auto reboot in odin i accidentally ticked "nand erase"..... and i didnt notice until it was too late.
Now i cant get into recovery mode, i can get to the download mode but it wont flash the twrp at all it keeps failing. all i get is a black screen with samsung logo when i try to start it up. i am downloading factory firmware as i write this and going to see if that'll flash. any help will be appreciated.
thanks in advance, hope this is the right place to post it.
Hey
If you can get to download mode,you just install the original firmware from smartswitch,I think you have that option to recover from that program,and install the original firmware.
Or just do it in Odin and find the firmware on SamM.
Lots of work for you,but thats the only thing I can come up with.
Then you have to root it again and everything with it.
PapaD78 said:
Hey
If you can get to download mode,you just install the original firmware from smartswitch,I think you have that option to recover from that program,and install the original firmware.
Or just do it in Odin and find the firmware on SamM.
Lots of work for you,but thats the only thing I can come up with.
Then you have to root it again and everything with it.
Click to expand...
Click to collapse
Thanks for your help, i downloaded the following https://forum.xda-developers.com/galaxy-s8/how-to/sm-g955f-stock-odin-firmware-t3585022 they all seem to fail when i try to flash them, do i have to do something different to what you would do flashing twrp? any options need to be selected? any particular order? Also the samsung switch software wont install on wither my ma or pc (win 10) " THIS APPLICATION HAS FAILED TO START BECAUSE ITS SIDE-BY-SIDE CONFIG IS INCORRECT"[/]
thanks again sorry for my newbness lol
anonuser111 said:
Thanks for your help, i downloaded the following https://forum.xda-developers.com/galaxy-s8/how-to/sm-g955f-stock-odin-firmware-t3585022 they all seem to fail when i try to flash them, do i have to do something different to what you would do flashing twrp? any options need to be selected? any particular order? Also the samsung switch software wont install on wither my ma or pc (win 10) " THIS APPLICATION HAS FAILED TO START BECAUSE ITS SIDE-BY-SIDE CONFIG IS INCORRECT"[/]
thanks again sorry for my newbness lol
Click to expand...
Click to collapse
How is it failing? Are you getting an error? Is Odin detecting your device?
anonuser111 said:
Thanks for your help, i downloaded the following https://forum.xda-developers.com/galaxy-s8/how-to/sm-g955f-stock-odin-firmware-t3585022 they all seem to fail when i try to flash them, do i have to do something different to what you would do flashing twrp? any options need to be selected? any particular order? Also the samsung switch software wont install on wither my ma or pc (win 10) " THIS APPLICATION HAS FAILED TO START BECAUSE ITS SIDE-BY-SIDE CONFIG IS INCORRECT"[/]
thanks again sorry for my newbness lol
Click to expand...
Click to collapse
No worry
You just have to install Microsoft visual c++ 2008 x86,after you have done that,no more errors in smartswitch.
Try that,and let us know
Long time since I used Odin now,but try the first thing first
anonuser111 said:
Thanks for your help, i downloaded the following https://forum.xda-developers.com/galaxy-s8/how-to/sm-g955f-stock-odin-firmware-t3585022 they all seem to fail when i try to flash them, do i have to do something different to what you would do flashing twrp? any options need to be selected? any particular order? Also the samsung switch software wont install on wither my ma or pc (win 10) " THIS APPLICATION HAS FAILED TO START BECAUSE ITS SIDE-BY-SIDE CONFIG IS INCORRECT"[/]
thanks again sorry for my newbness lol
Click to expand...
Click to collapse
Morning Mate,
Smart Switch (and KIES on Win 10) requires some old stuff to work. Install Microsoft Visual C++ 2008 SP1 Redistributable Package (x86) from https://www.microsoft.com/en-us/download/details.aspx?id=5582 My advice however would be to try and flash your carriers stock firmware with ODIN or if you want an easier way you can use KIES by doing the following -
- Install C++ 2008 SP1 from link above to get it to work on Windows 10
- Install KIES www.samsung.com/au/support/usefulsoftware/KIES/ - I'm in Australia so that's my closest but you can still get it from there no worries.
- Also select install 'unified driver' during install if you have not already installed Samsung USB drivers to your PC
- Fire up KIES and from the top menu select 'Tools' and from the drop down menu select 'Firmware Upgrade and Initialisation'
- Enter in your model number - for me it's SM-G955F (make sure model is all in CAPS or it will not work). Now it will present you with a S/N dialog box. This is the tricky part if your phone is bricked. Chances are you have not written down your serial number. You can get your serial number from the back of your phone towards the bottom in really small print, or you can get it from the box it came in from purchase if you happened to have kept that.
- Enter in the serial number and follow the instructions, it's easy as. This will install your stock firmware and you can start again. Provided there is no damage to the phone this method will always get you out of the proverbial as a last resort and it's faster than downloading firmware from updato.com or other places.
The fastest way is by using the SamFirm tool to download but it takes some knowledge and I have lost the link to where I got it (the link at XDA is dead now and refers you to updato.com). The method with KIES above will always work, is fairly fast and pretty easy for the newbies or experienced alike.
Hope this helps, let me know if you need any more assistance :good:
Thanks heaps mate, im also in australia too. have installed all the software and is updating and installing as i write this, all seems to be going well so far, thank you so much your a life saver i was starting to worry as wtf i could do with this brick haha i will keep you posted and let you know if i have nay problems. Thanks to everyone else for their help and contribution this forum is awesome. What would you recommend in regards to rooting the phone again use the twrp recovery and magisk-v14.0 root?
thanks again
I was just about to write a post about how it wouldnt work.... twice in a row it kept failing when it went to install and initialize... 3rd time lucky it ****ing worked! i have a stock phone now all working sweet. Thanks so much to everyone you guys are literally lifesavers!
LEGENDS! Happiest man alive right now.