[Q] How to reflash a tablet (Onda V712) that won't boot or go into recovery mode? - General Questions and Answers

Hello all
I have a peculiar problem with my Onda V712. I'm hoping that you guys may be able to help me out.
The tablet was working fine and was 90% charged. I was having some issues with my google account so I decided to delete it and set it up again. After deleting the google account I switched off the tablet. When I switched it on again a white android bot came on the screen and nothing beyond that. I waited for almost 30 minutes but there was no progress. The tablet wouldn't boot up beyond the white android bot. I rebooted it several times but no luck. I have tried the following so far-
1. let the battery drain completely by leaving it switched on. The white android bot was on all the time. Then I charged the tablet for 6 hours and tried to boot but the issue persists.
2. Tried the reset button several times with no luck.
3. Tried to get into recovery mode by holding the home button and then pressing/tapping the power button. The tablet doesn't go into recovery. It just shows the white android bot and there is no progress after that.
4. Downloaded the latest firmware from the onda site (I have version 2 so I downloaded the appropriate firmware). Unzipped the contents of the zipped file (total 5 files after deleting the instructions file) to a formatted sd card. Inserted the sd card onto the tablet while the tablet was switched off. Then tried to boot via the sd card by pressing the home button and then the power button as suggested in the onda manual (which was in chinese). But it would just power up with the white android bot and wouldn't do anything beyond that.
I am not sure what I can do to revive this tablet. BTW, when I connect the charger to the tablet I can see the animated battery indicator showing that the battery is charging. Also when I connect it to my pc, it shows up as m3-chip in the device manager with an exclamation mark against it. It says that the drivers are not installed correctly or something like that.
Any help would be appreciated. Thanks in advance.

astleviz said:
Hello all
I have a peculiar problem with my Onda V712. I'm hoping that you guys may be able to help me out.
The tablet was working fine and was 90% charged. I was having some issues with my google account so I decided to delete it and set it up again. After deleting the google account I switched off the tablet. When I switched it on again a white android bot came on the screen and nothing beyond that. I waited for almost 30 minutes but there was no progress. The tablet wouldn't boot up beyond the white android bot. I rebooted it several times but no luck. I have tried the following so far-
1. let the battery drain completely by leaving it switched on. The white android bot was on all the time. Then I charged the tablet for 6 hours and tried to boot but the issue persists.
2. Tried the reset button several times with no luck.
3. Tried to get into recovery mode by holding the home button and then pressing/tapping the power button. The tablet doesn't go into recovery. It just shows the white android bot and there is no progress after that.
4. Downloaded the latest firmware from the onda site (I have version 2 so I downloaded the appropriate firmware). Unzipped the contents of the zipped file (total 5 files after deleting the instructions file) to a formatted sd card. Inserted the sd card onto the tablet while the tablet was switched off. Then tried to boot via the sd card by pressing the home button and then the power button as suggested in the onda manual (which was in chinese). But it would just power up with the white android bot and wouldn't do anything beyond that.
I am not sure what I can do to revive this tablet. BTW, when I connect the charger to the tablet I can see the animated battery indicator showing that the battery is charging. Also when I connect it to my pc, it shows up as m3-chip in the device manager with an exclamation mark against it. It says that the drivers are not installed correctly or something like that.
Any help would be appreciated. Thanks in advance.
Click to expand...
Click to collapse
U must download a "right firmware" on ur v712,but how do u know ur v712 is V2??
My v712 is V1 so i download v1-1.4 and its work ,u should try,go to onda.cn (its china but u can use google tranlate)
I hope its ok for you ^^

rinharuka said:
U must download a "right firmware" on ur v712,but how do u know ur v712 is V2??
My v712 is V1 so i download v1-1.4 and its work ,u should try,go to onda.cn (its china but u can use google tranlate)
I hope its ok for you ^^
Click to expand...
Click to collapse
You can find V1 or V2 from 9 and 10 digit in serial number.
I have (tried to) read about flashing with PC flash tool on www.ondabbs.cn. I have downloaded the tool, but it crashes on my Win7 64 bits machine.... Maybe this can help, if you get it running Google translate makes funny translation of chinese :crying:
I have a V2 version and could not succesfully flash 1.5 firmware. I get a checksum failure on flashing the Patch.zip. I managed to flash it by replacing the Patch.zip by a Patch.zip from www.ondabbs.cn. Now I'm on V2 1.5. But there are some issues with wifi (sometimes is connected, but does not get data). And the screen starts to flicker when battery gets low.
I hope CM10 will be ported to this wonderful tablet soon... Anyone ideas?

uriseri richard
rinharuka said:
U must download a "right firmware" on ur v712,but how do u know ur v712 is V2??
My v712 is V1 so i download v1-1.4 and its work ,u should try,go to onda.cn (its china but u can use google tranlate)
I hope its ok for you ^^
Click to expand...
Click to collapse
The version number can be found in the serial number at the back of the tablet. My tablet says v2 so I downloaded v2 version from onda.cn site. So the firmware is not a problem, getting the tablet to boot into recovery mode is. No matter what I try I can't get beyond the white android bot that appears on the screen when the tab is powered up. I have attached a photoshopped screenshot to show you exactly how my tab looks when I power it up. After that there is no progress.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

GuustFlater89 said:
You can find V1 or V2 from 9 and 10 digit in serial number.
I have (tried to) read about flashing with PC flash tool on ondabbs.cn. I have downloaded the tool, but it crashes on my Win7 64 bits machine.... Maybe this can help, if you get it running Google translate makes funny translation of chinese :crying:
I have a V2 version and could not succesfully flash 1.5 firmware. I get a checksum failure on flashing the Patch.zip. I managed to flash it by replacing the Patch.zip by a Patch.zip from ondabbs.cn. Now I'm on V2 1.5. But there are some issues with wifi (sometimes is connected, but does not get data). And the screen starts to flicker when battery gets low.
I hope CM10 will be ported to this wonderful tablet soon... Anyone ideas?
Click to expand...
Click to collapse
Thanks for your response. Could you post the links to the pc flash tool and the patch.zip files you have mentioned? I tried to go through the ondabbs site but it's almost impossible to figure out the specific links even after using google translation.
Thanks again.

Please see http://translate.googleusercontent....211902&usg=ALkJrhixjaw8-Wc0mglAMXtRJIkdcwDrPQ
I hope this helps, I could not get the flash tool running....
I got the Patch.zip from the V712 v2 1.5 firmware in the same topic.
Sent from my ONDA MID using xda app-developers app

hi astleviz,
Any progress?
Sent from my ONDA V712 using xda app-developers app

GuustFlater89 said:
hi astleviz,
Any progress?
Sent from my ONDA V712 using xda app-developers app
Click to expand...
Click to collapse
Yes, there is progress, if you can call it that
Used flash tool the drivers installed properly, the tablet was identified. Uploaded the onda firmware into the flash tool and ran the upgrade. It stopped/failed at 65%. Since then my tablet is dead. no ore white android logo or charging indicator, totally dead.

That some progress, but unfortunately no solution... It is difficult to read the translated forum indabbs.cn, but I know there is a lot of discussion on this issue. No possibility to start in bootmenu by pressing home while starting tablet?
Good luck. If i find something new I will post.
Second I still hope someone more skilled than I am, will make a nice CM10 rom for this interesting device
Edit: Maybe a very obvious remark: Is the battery charged? I have read somewhere that during flashing the battery might drain very quickly (and did not charge through USB). Maybe some time on a dedicated charger might help?
Sent from my ONDA MID using xda app-developers app

Hi astleviz, I just noticed there is an updated flash tool available (dated 17 oct). Maybe this can help you?
Please see this lnk
I hope this might help you.

guys you are great. many days trying to recover onda v701 and nothing. the i found this thread and saved my tablet. many thanks.

can anyone post PCTool_SPI-1010.rar ?
The link is dead.
Any easy way to root the device?
I would like to remove all the Chinese apps

Maybe this will help for flashing v712 tablet...
instructions and all links contained in post... worked for my tablet perfectly. removed all the chinese bloatware and also adds root ability...now i wait for Jelly Bean!
oh, after flash, system boots in china display language, so.. choose apps menu, and then navigate by icons...
GooglePlaystore works flawlesly after flash..
http://www.androidtablets.net/forum/onda-tablet-forum/51710-v712-root-google-play-etc.html

sb2003 said:
Maybe this will help for flashing v712 tablet...
instructions and all links contained in post... worked for my tablet perfectly. removed all the chinese bloatware and also adds root ability...now i wait for Jelly Bean!
oh, after flash, system boots in china display language, so.. choose apps menu, and then navigate by icons...
GooglePlaystore works flawlesly after flash..
http://www.androidtablets.net/forum/onda-tablet-forum/51710-v712-root-google-play-etc.html
Click to expand...
Click to collapse
thanks. mine already had Google Play working.
1 big tip for all: do not use windows 7 to flash.
it messed up my tablet, because it was not recognised during flashing.
i did the whole thing on xp and it was alive again.

OpenMinded said:
thanks. mine already had Google Play working.
1 big tip for all: do not use windows 7 to flash.
it messed up my tablet, because it was not recognised during flashing.
i did the whole thing on xp and it was alive again.
Click to expand...
Click to collapse
Google talk force closes.
gmail too, but i fixed that by following a tip: enable sync in the account and then it works.
Anyone has a working talk with camera support?

Onda v701
Hello Everyone,
I have some problem with my tablet ONDA v701. i cannot start it. the system block with the white android robot and stuck. i tried to start+home button to enter in the recovery system but nothing nothing appear. i tried that : watch?v=W1G79ETetxY but my pc telling that ir missing some files. i download all the files but nothing. did somone can help with an English or French Language ??
Many thank

Onda V703 boot issues
I am having the same issue with my Onda V703 model. Nothing I do seems to get it to boot beyond the bot screen. I do't have a very good working with tablets so any help from the tech gurus out there would be appreciated. Thanks

thanks

Related

bricked Nexus S, Ubuntu tool doesn't work but home and search key are lit up

:crying:
really wired.
i have tried that Linux tool under ubuntu , but couldn't find device in both Nexus S option and Galaxy S option because i saw someone who worked in Galaxy S mode with Nexus S phone.
somehow , i don't know why , i have search key and home key lit up, but when i try flash bootloader via fastboot , it keep saying "waiting for device" in both windows and ubuntu. i couldn't get into download mode becuase i try Odin , still non-responsive as screen is dark i have no idea where am i...
i have no idea what to do next. only thing i haven't tried yet is that hardware modification , but i don't have soldering tools around.
i am not fully comprehended how to modify it ...
is just connect the first and last one , and then remove the middle one that connects thoes 2 points ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks in advance
help....help...help...
Sir i didn't understand a single word that has been spoken here
A little detail about how you got to this point in your phone would help us all to realize the problem and then the solution
converse5 said:
Sir i didn't understand a single word that has been spoken here
A little detail about how you got to this point in your phone would help us all to realize the problem and then the solution
Click to expand...
Click to collapse
well ... sorry , i thought i have made myself clear , but obviously not ...
i have a 9023 , it works fine for long time about year, recently i updated bootloader and to 4.1 JB version , but after a little running of JB , i decided downgraded to 4.04 as i would be waiting for AOKP JB come out.
then one day , i killed my first battery and i replaced it with my second battery , suddenly it just doesn't boot up anymore , nothing at all , not even google sign , unable to download mode, recovery mode , nothing happens but phone will heat up without running.
then i went here and some other forum that lots lots users say that have same problem and some of them gave a solution is that use that unbrickable tools which runs under Ubuntu.
after hours of downloading , installing and configuring java, i finally managed to get it work, but unfortunately it doesn't work out as instructions indicates , UnBrickableResurrectorR40 keep report device not found.
ok , i don't know what to do , i send it to a mobile shop which repairs mobile , days later i took back my phone and they say they couldn't bring it back to live...
so i decided to do that hardware modification to see if it works or not , because things couldn't get any worse or better by replacing motherboard ...
but somehow , i found it that search key and home key would light up and i took it back , they don't do so before i send it in ... so i thought they may do something to my phone , i went to Ubuntu again , still no detected. and both fastboot and Odin didn't work ...
so ...
qtwrk said:
help....help...help...
Click to expand...
Click to collapse
I have the same issue - check here for our progress -> http://forum.xda-developers.com/showthread.php?t=1396056&page=21
I have done the hardware mod but I cannot get into fastboot nor download - no softkeys lit up / if I used the Galaxy S bootloader I can get download mode showing on the screen. But Im trying to get a Nexus S i9020T PIT file! Does anyone here have 1.3.2 heimdall and an i9020T - can you download the PIT file and upload it here for me to test?
ru1dev said:
I have the same issue - check here for our progress -> http://forum.xda-developers.com/showthread.php?t=1396056&page=21
I have done the hardware mod but I cannot get into fastboot nor download - no softkeys lit up / if I used the Galaxy S bootloader I can get download mode showing on the screen. But Im trying to get a Nexus S i9020T PIT file! Does anyone here have 1.3.2 heimdall and an i9020T - can you download the PIT file and upload it here for me to test?
Click to expand...
Click to collapse
could you tell me how to modify hardware ?
just like i said, connect those 2 point of first one and last one in attached picture and remove the middle one's connector?
qtwrk said:
could you tell me how to modify hardware ?
just like i said, connect those 2 point of first one and last one in attached picture and remove the middle one's connector?
Click to expand...
Click to collapse
yes remove the resistor circled and connect the 2 points you circled
ru1dev said:
yes remove the resistor circled and connect the 2 points you circled
Click to expand...
Click to collapse
that middle one was 2 points connected , right ? what i have to do is disconnect them ?
how am i supposed to connect those 2 points i circled?
qtwrk said:
that middle one was 2 points connected , right ? what i have to do is disconnect them ?
how am i supposed to connect those 2 points i circled?
Click to expand...
Click to collapse
Yes removing the resistor xOM5 will disconnect the two points. use a small wire to connect the other two points.
ru1dev said:
Yes removing the resistor xOM5 will disconnect the two points. use a small wire to connect the other two points.
Click to expand...
Click to collapse
still no good... may be he did wrong thing ...but who knows ... it's really really too small inside there ... this isn't a job for humans ...it is for machines ...
i guess know only way to bring it back to live is replace motherboard ...
qtwrk said:
still no good... may be he did wrong thing ...but who knows ... it's really really too small inside there ... this isn't a job for humans ...it is for machines ...
i guess know only way to bring it back to live is replace motherboard ...
Click to expand...
Click to collapse
device is not detected by unbrickable?
I have been debating if the reason i cannot get into fastboot nor download with nexus S sbl is because the power button has also failed.
ru1dev said:
device is not detected by unbrickable?
I have been debating if the reason i cannot get into fastboot nor download with nexus S sbl is because the power button has also failed.
Click to expand...
Click to collapse
yes, unable to detected after hardware MOD...

[Q] Goclever R75 (7500) - boot freeze (bootloop ? )

Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
haseo9119 said:
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
Click to expand...
Click to collapse
You can't access recovery or download mode too ?
karimkahale said:
You can't access recovery or download mode too ?
Click to expand...
Click to collapse
Goclever hasn't published any R75 firmware yet. Also this tablet doesn't have any physical buttons except power switch. On my native language forum was sometime ago rumor that on downside motherboard is switch which combination with power button gives recovery menu. Personally i tried various combinations but didn't worked for me.
Any ideas ?
haseo9119 said:
Any ideas ?
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Regarding ADB, hmm... this is strange. I have done the same thing as you (deleted the launcher and restore to default) but adb was working with device in the android logo state.
I'm using Windows 8 and I have installed the device as test ADB device (from windows drivers).
Bye.
Edit:
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
On the back he have written that he's tab 7500. Soon i will try to flash him with your 7500 image. Hope it will work ^^ Thank you very much.
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
haseo9119 said:
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
Click to expand...
Click to collapse
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
goclever
severijan said:
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
Click to expand...
Click to collapse
hello
this may help some one later
to get into recovery if your R75 table wont boot you have to take it apart the button is on the underside of the board behind the screen (silly place to put it) i have being talking to goclever support and more firmwares are going to be added to the site. if you want yours adding send them an email requesting it (one may not be enough ) i have just had this problem and after a month they agreed to take it back and have reflashed it for me
hope this helps someone

LEAGOO Alfa 5

The new smartphone from LEAGOO is here, its not a high end one, but it does its job
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5.0" HD 1280*720 IPS, Capacitive touch screen
Spreadtrum SC7731 Quad core 1.3GHz
Android 5.1 OS, 1GB RAM +8GB ROM
Dual Cameras, front camera 5.0MP back camera 8.0MP
Dual SIM Card Dual Standby, Ordinary SIM Card
Support 3G/WIFI/Bluetooth/Multi-language
any test for this phone?
bob nguala said:
any test for this phone?
Click to expand...
Click to collapse
Just received it today, so first impressions only
Looks VERY nice, and strong
smooth as hell and very nice screen
Connects fast to wifi, 4g, and my BT devices are ok (BT2.1 & BT4.0)
So right now... Cool for the price
Device looks to be rootable with kingroot...
Any1 knows how to go to recovery ?
Have you tested the GPS?
How is the LEAGOO Alfa 5 performance?
Zunera M said:
How is the LEAGOO Alfa 5 performance?
Click to expand...
Click to collapse
Sorry, didn't test anything... I got a message informing me of an update and the phone is dead...
Waiting for infos from the manufacturer!!!
If you buy it, don't try to update it!!!
hello, i'm in the same condition, after a update the phone is death. i have installed a rom donwloaded from the official malaysian leagoo website but now have don't work the sim readers... it can't register to network
i have the build 1.1_20151218, may i try with a downgrade if i can find somewhere...
http://www.leagoo.com.my/support/downloads/
davide.an120 said:
hello, i'm in the same condition, after a update the phone is death. i have installed a rom donwloaded from the official malaysian leagoo website but now have don't work the sim readers... it can't register to network
i have the build 1.1_20151218, may i try with a downgrade if i can find somewhere...
http://www.leagoo.com.my/support/downloads/
Click to expand...
Click to collapse
The seller sent me a new ROM (2016-01-07) but I can't flash it...
Then send me a new phone...
Hope this one will work a bit longer
hi all! i have this phone since Feb 4th, 2016... read this forum before buy and use this phone, i didnt update the system on it. after this fatal update, the phone doesnt turn on at all? made a brick?
a question: does this phone has notification led light at the front? as i know it does, but mine doesnt work at all, even during charging. how could i fix it?
Update issue
The bug is still there?
pctv007 said:
The seller sent me a new ROM (2016-01-07) but I can't flash it...
Then send me a new phone...
Hope this one will work a bit longer
Click to expand...
Click to collapse
Ok, I contacted Legoo and they kindly (but quite slowly) helped me.
Now I flashed the phone and it's working again on 2016-01-20 update.
It's a GOOD phone.
pctv007 said:
Ok, I contacted Legoo and they kindly (but quite slowly) helped me.
Now I flashed the phone and it's working again on 2016-01-20 update.
It's a GOOD phone.
Click to expand...
Click to collapse
could you please tell us, how to flash it step by step? What application you used on the PC, and how? thanks
Please tell us how to flash
pctv007 said:
Ok, I contacted Legoo and they kindly (but quite slowly) helped me.
Now I flashed the phone and it's working again on 2016-01-20 update.
It's a GOOD phone.
Click to expand...
Click to collapse
Hi , please tell us how to flash the phone.
My IMEI has disappeared too, i loaded all tools from LEAGOO website,
but when using the flash tool for replacing the ROM, theres no way to access the phone
Support from Leagoo is a mess, but the phone is quite good !
So, in what state should the phone be, to be recognized ?
I used "normal" mode of booting, just into the operating system, having USB for data transfer on, usb debugging on - phone isnt recognized by flashtool.
Sholud it be in recovery mode or fastboot mode, when yes, how to access it ?
Thanks in advance
Sorry, I didn't see there were questions.
The way to flash is "quite" simple:
You have to
-switch off the phone
-plug the usb cable
-press vol- and power at the same time
- The phone will turn on BUT the update software will recognize it
-release both buttons as soon as the soft sees the phone or it will turn off again
- And be patient: flash took 12 minutes for me but you'll see the progress
Had to find this by myself because the support people are VERY kind, but I'm not sure they want to tell this
pctv007 said:
Sorry, I didn't see there were questions.
The way to flash is "quite" simple:
You have to
-switch off the phone
-plug the usb cable
-press vol- and power at the same time
- The phone will turn on BUT the update software will recognize it
-release both buttons as soon as the soft sees the phone or it will turn off again
- And be patient: flash took 12 minutes for me but you'll see the progress
Had to find this by myself because the support people are VERY kind, but I'm not sure they want to tell this
Click to expand...
Click to collapse
What version of ROM do you have? I have MY_LEAGOO_Alfa_5_OS1.1_20160120 from Leagoo.com.my but is so lite ...it has no ringtones no sounds no themes .Do you have any rom with the previous goodies?
Sorry, same version... But there are ringtones and sounds... I don't know about themes, as I don't use them
Ringtones and other stuff
mlojim said:
What version of ROM do you have? I have MY_LEAGOO_Alfa_5_OS1.1_20160120 from Leagoo.com.my but is so lite ...it has no ringtones no sounds no themes .Do you have any rom with the previous goodies?
Click to expand...
Click to collapse
Hi Guys, although (ring)tones seem not to be the most important for using this lovely phone, i would suggest to use one of the uncountable apps who provides ringtones and others.
Go to GooglePlay and search for "ZEDGE". There is advertising included, but for testing ist more than enough.
Have fun !
---------- Post added at 11:34 AM ---------- Previous post was at 11:26 AM ----------
pctv007 said:
Sorry, I didn't see there were questions.
The way to flash is "quite" simple:
You have to
-switch off the phone
-plug the usb cable
-press vol- and power at the same time
- The phone will turn on BUT the update software will recognize it
-release both buttons as soon as the soft sees the phone or it will turn off again
- And be patient: flash took 12 minutes for me but you'll see the progress
Hi There, another note to flashing ( also had to find it myself, didnt have a look here to note this fine advertisement
My way to flash:
- Switch off the phone
- Hold Volume - button
- Plug in the usb cable
- The phone will turn on AND the update software will recognize it
By the way, does anyone know a custom recovery for the Alfa 5 ?
When goinf into stock recovery with power on & Vol + simultanously, i get malyasian ( chinese ? ) charcters, im unablte to do something in there.
Anayone facing the same problem ? Solutions for it ?
Thanks !
Click to expand...
Click to collapse
By the way, does anyone know a custom recovery for the Alfa 5 ?
When goinf into stock recovery with power on & Vol + simultanously, i get malyasian ( chinese ? ) charcters, im unablte to do something in there.
Anayone facing the same problem ? Solutions for it ?
Thanks !
Click to expand...
Click to collapse
Hi again
Now when I want to flash, the soft recognizes the phone, but stops after 3s... any idea ?
Thanks
note: updating via wireless updating menu from leagoo os1.1 lite 2015.12.xx (i dont remeber of the day) to leagoo os1.1 lite 2016.03.22 is SAFE! i just now did it and everything is fine.
Leagoo Alfa 5 root
Hi folks, has anyone rooted his Leagoo Alfa 5 already ? Would be fine if we could know how ....
And also anyone installed a custom recovery on it ? CWM or TWRP ? Any help appreciated !
Thanks

[Tutorial] No OS installed are you sure you want to reboot ? Here is the FIX !

Hello everyone , a lot of users end up sometimes with this error while flashing a custom rom or wiping partitions on recovery. Almost all of us use TWRP , you will get this error while trying to reboot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So what to do ? Is my phone dead ? No there is always a solution. First , if you have a backup of your rom you have no problem , don't continue reading this guide , i will just waste your time . Second, if you already have a custom rom on your external sd card then you can flash it and your issue is gone. But what about Nexus users ? Galaxy S6 ? And all phones with no sd card slot , in this case adb is the solution.
Warning , before you follow those steps remember you should have TWRP OR CWM already installed. :
1. Download adb drivers ( you should download the last version of adb , previous versions won't work ).
2. Download fastboot
http://downloadandroidrom.com/file/tools/fastboot.zip
3. Extract it , you should get a fastboot folder with all files needed.
4. Now , download a custom rom , for exemple last CM13 nightly and put it in fastboot folder , you can add gapps too.
5. Plug your phone into your computer , your drivers should be installed. You will get your device recognized like that : ( look down in attached files )
6. Now go to fastboot folder and open command. ( Shift + right )
7. Type this : cd Downloads
cd fastboot
adb devices
8. You should get some numbers followed by recovery like that : ( look down again )
9. Now you are almost there
10. Type this :
adb push filename /sdcard/.
Replace the filename by the name of your rom zip !!!
11. Wait for it , it's copying files to your internal storage.
12. Done ! Now all you have to do is unplug your phone and flash your rom via recovery.
I hope this tutorial was helpful and saved you !
Mods i don't know of it's the right forum for this tutorial as it can be applied for a lot of devices , if not you can move it to the proper place , thank you
No feedback ?
Sent from my SM-T116 using XDA Free mobile app
Soufiansky said:
No feedback ?
Sent from my SM-T116 using XDA Free mobile app
Click to expand...
Click to collapse
It need a opportunity to let us try this, but I don't want I get this opportunity.
127cwho said:
It need a opportunity to let us try this, but I don't want I get this opportunity.
Click to expand...
Click to collapse
Lol but you know if you ever face this issue here is the fix
I know this is old, but what rom should I get for the huawei p9 lite. cm is dead, and the new one doesn't support the p9 lite.
I bought my phone online, and it wouldn't access the google play store. So I'm doing this to try to fix that, though I'm not tech savy, and I accidentally wiped system(oops).
Any help please?
---------- Post added at 05:55 AM ---------- Previous post was at 05:16 AM ----------
When you say go to the fastboot folder and open command, what do I open?
NEED HELP
Soufiansky said:
Hello everyone , a lot of users end up sometimes with this error while flashing a custom rom or wiping partitions on recovery. Almost all of us use TWRP , you will get this error while trying to reboot :
So what to do ? Is my phone dead ? No there is always a solution. First , if you have a backup of your rom you have no problem , don't continue reading this guide , i will just waste your time . Second, if you already have a custom rom on your external sd card then you can flash it and your issue is gone. But what about Nexus users ? Galaxy S6 ? And all phones with no sd card slot , in this case adb is the solution.
Warning , before you follow those steps remember you should have TWRP OR CWM already installed. :
1. Download adb drivers ( you should download the last version of adb , previous versions won't work ).
2. Download fastboot
http://downloadandroidrom.com/file/tools/fastboot.zip
3. Extract it , you should get a fastboot folder with all files needed.
4. Now , download a custom rom , for exemple last CM13 nightly and put it in fastboot folder , you can add gapps too.
5. Plug your phone into your computer , your drivers should be installed. You will get your device recognized like that : ( look down in attached files )
6. Now go to fastboot folder and open command. ( Shift + right )
7. Type this : cd Downloads
cd fastboot
adb devices
8. You should get some numbers followed by recovery like that : ( look down again )
9. Now you are almost there
10. Type this :
adb push filename /sdcard/.
Replace the filename by the name of your rom zip !!!
11. Wait for it , it's copying files to your internal storage.
12. Done ! Now all you have to do is unplug your phone and flash your rom via recovery.
I hope this tutorial was helpful and saved you !
Click to expand...
Click to collapse
Hi man,
I'm so glad I found the issue I was facing, I have a S6 G920F and I accidentally deleted the OS and now its giving that error in TWRP. Ok, I'm a total noob, I know so I need further hep with a couple of things.
1) What are adb drivers? Like what do they do? and could you send a link for the latest version ?
2) Which custom ROM should I download for this model? (This is what I desperately need, I have no idea where to get the right custom ROM). Please send a link for it too......
I know I'm super annoying but I'll be eternally grateful if you help me fix my phone, life sucks without it xD
Thanks
I'm in big problem please help me
I got "no os installed " are you sure you wish reboot"
Then with a stupid way I click on and swiped on "are you sure.." then I can't do anything please give a piece of advice please I want that problem will be solved by your help please give me an answer guys:crying::crying: I'm using s6 edge
pro mob said:
I got "no os installed " are you sure you wish reboot"
Then with a stupid way I click on and swiped on "are you sure.." then I can't do anything please give a piece of advice please I want that problem will be solved by your help please give me an answer guys:crying::crying: I'm using s6 edge
Click to expand...
Click to collapse
Download the last firmware for your device and flash it via odin, and if you already have a custom ROM in your sdcard just reboot in recovery and flash it :good:
UziDerulo77 said:
Hi man,
I'm so glad I found the issue I was facing, I have a S6 G920F and I accidentally deleted the OS and now its giving that error in TWRP. Ok, I'm a total noob, I know so I need further hep with a couple of things.
1) What are adb drivers? Like what do they do? and could you send a link for the latest version ?
2) Which custom ROM should I download for this model? (This is what I desperately need, I have no idea where to get the right custom ROM). Please send a link for it too......
I know I'm super annoying but I'll be eternally grateful if you help me fix my phone, life sucks without it xD
Thanks
Click to expand...
Click to collapse
I am very sorry for this late answer, i didnt saw your post until today, did you fix your issue ?
Soufiansky said:
Download the last firmware for your device and flash it via odin, and if you already have a custom ROM in your sdcard just reboot in recovery and flash it :good:
Click to expand...
Click to collapse
Soufiansky help me please I didn't use my s6 edge for more 1 month when I swiped on "are you sure you wish to reboot" and after that the phone show me the starting page Samsung galaxy s6 edge powered by Android " just the screen stayed like that till the battery ends 0 percent and after a month and few days I put my s6 in the charge and there is this screen now I put him around 1.5 hour in charge and there's always that screen please help me I'm in a big problem and I will be so happy with any answer and thank you very much please don't let me face this problem in my own and in the s6 the is no sd card port
---------- Post added at 03:07 PM ---------- Previous post was at 03:03 PM ----------
pro mob said:
Soufiansky help me please I didn't use my s6 edge for more 1 month when I swiped on "are you sure you wish to reboot" and after that the phone show me the starting page Samsung galaxy s6 edge powered by Android " just the screen stayed like that till the battery ends 0 percent and after a month and few days I put my s6 in the charge and there is this screen now I put him around 1.5 hour in charge and there's always that screen please help me I'm in a big problem and I will be so happy with any answer and thank you very much please don't let me face this problem in my own and in the s6 the is no sd card port
Click to expand...
Click to collapse
I got now the image of the empty battery and that's all
pro mob said:
Soufiansky help me please I didn't use my s6 edge for more 1 month when I swiped on "are you sure you wish to reboot" and after that the phone show me the starting page Samsung galaxy s6 edge powered by Android " just the screen stayed like that till the battery ends 0 percent and after a month and few days I put my s6 in the charge and there is this screen now I put him around 1.5 hour in charge and there's always that screen please help me I'm in a big problem and I will be so happy with any answer and thank you very much please don't let me face this problem in my own and in the s6 the is no sd card port
---------- Post added at 03:07 PM ---------- Previous post was at 03:03 PM ----------
I got now the image of the empty battery and that's all
Click to expand...
Click to collapse
Sure sure i will help you.
-First download Odin on your PC , its a program to flash firmwares
-Second, search on google for "Samsung Drivers" and install them
-Third, Now go to sammobile website, write your phone model ( i suppose its G920F ) , go to region and choose whatever you like, i suggest you XEF ( France ) or DBT ( Germany ), download the file and unzip it, you will get a .tar file
-Fourth, charge the phone to 100%
-Fifth, now open odin, boot your S6 after being charged to download mode ( Hold Power button + Home + volume down ), you will get a black screen with info click on volume up, you will get a green screen with "Downloading" written in the middle
-Sixth, plug it on your PC, wait for like 2min you SHOULD get a blue BOX in odin and "Added" written down left
-Seventh, put the firmware you downloaded in AP, the .tar file, its +3GB
-Eighth, now wait for it to check md5, when its over click on start and wait. It should take 4 to 12 minutes, then all good your phone will reboots for itself.
-Nineth, I suggest you to do a factory reset after the phone booted, you turn off your S6, boot in recovery and factory reset then Reboot ( All data will be erased ! )
- 10, your S6 is back to life mate
Follow this instructions carefully, it will 100% work. If you need anything else i'm here to help you, dont freakout or something the issue is normal and will be easily fixed !
Soufiansky fiansky;72642877]Download the last firmware for your device and flash it via odin, and if you already have a custom ROM in your sdcard just reboot in recovery and flash it :good:[/QUOTE]
Soufiansky I swiped on " are you sure you wish to reboot " one month ago then I had the starting screen "Samsung galaxy s6 edge powered by Android" and then it didn't to move on and the situation continued till the battery got 0 percent and now when I put my s6 in the charger after a month of not using it it show me the screen of the empty battery and in that situation i charged my phone for 1 hour and 14 mn and i cant do anything even with bottons so whats the solution please? Did s6 need more time to charge please im in a big problm help me please and the there is no sd card in s6 edge please im very scared if there is a problem in the motherboard please give me an answer I will be very happy
---------- Post added at 04:17 PM ---------- Previous post was at 03:36 PM ----------
Soufiansky said:
Sure sure i will help you.
-First download Odin on your PC , its a program to flash firmwares
-Second, search on google for "Samsung Drivers" and install them
-Third, Now go to sammobile website, write your phone model ( i suppose its G920F ) , go to region and choose whatever you like, i suggest you XEF ( France ) or DBT ( Germany ), download the file and unzip it, you will get a .tar file
-Fourth, charge the phone to 100%
-Fifth, now open odin, boot your S6 after being charged to download mode ( Hold Power button + Home + volume down ), you will get a black screen with info click on volume up, you will get a green screen with "Downloading" written in the middle
-Sixth, plug it on your PC, wait for like 2min you SHOULD get a blue BOX in odin and "Added" written down left
-Seventh, put the firmware you downloaded in AP, the .tar file, its +3GB
-Eighth, now wait for it to check md5, when its over click on start and wait. It should take 4 to 12 minutes, then all good your phone will reboots for itself.
-Nineth, I suggest you to do a factory reset after the phone booted, you turn off your S6, boot in recovery and factory reset then Reboot ( All data will be erased ! )
- 10, your S6 is back to life mate
Follow this instructions carefully, it will 100% work. If you need anything else i'm here to help you, dont freakout or something the issue is normal and will be easily fixed !
Click to expand...
Click to collapse
Thanks I hope that the screen of the empty battery disappear and I hope my motherboard is ok
No no its not the motherboard, look let it completely discharge then charge it, let it for like 2h it will charge, your problem is software related not hardware
What the hell!
Soufiansky said:
Mods i don't know of it's the right forum for this tutorial as it can be applied for a lot of devices , if not you can move it to the proper place , thank you
Click to expand...
Click to collapse
hmm..
sisi1792 said:
hmm..
Click to expand...
Click to collapse
What ?
Soufiansky said:
No no its not the motherboard, look let it completely discharge then charge it, let it for like 2h it will charge, your problem is software related not hardware
Click to expand...
Click to collapse
Hi Soufiansky my s6 is back thanks to you and sorry for the late answer but when I want to install the twrp mode with odin the phone can't reboot please help this time please and I could boot into download mode and twrp mode but the s6 can't reboot always the screen s6 edge powered by Android and then the same screen what can I do please don't let me alone
pro mob said:
Hi Soufiansky my s6 is back thanks to you and sorry for the late answer but when I want to install the twrp mode with odin the phone can't reboot please help this time please and I could boot into download mode and twrp mode but the s6 can't reboot always the screen s6 edge powered by Android and then the same screen what can I do please don't let me alone
Click to expand...
Click to collapse
No problem happy it worked for you mate. For twrp, go to twrp website and download last twrp.tar file, put it in odin then reboot in download mode, plug your phone and wait to that blue box as i told you last time, then press start, wait for like 1 min and enjoy. Be sure you download a .tar file for G920F and put it in AP section, thats all it will definitely work
Soufiansky said:
No problem happy it worked for you mate. For twrp, go to twrp website and download last twrp.tar file, put it in odin then reboot in download mode, plug your phone and wait to that blue box as i told you last time, then press start, wait for like 1 min and enjoy. Be sure you download a .tar file for G920F and put it in AP section, thats all it will definitely work
Click to expand...
Click to collapse
I did it and I downloaded the latest version of twrp 3.1.1.0 if. tar and it didn't work on my s6 edge so can you send me may be the right version if not is it a solution to download the firmware as we did before
if you have please a solution via twrp because it works but not the s6 edge help me and I'm on windows xp 32bits
pro mob said:
I did it and I downloaded the latest version of twrp 3.1.1.0 if. tar and it didn't work on my s6 edge so can you send me may be the right version if not is it a solution to download the firmware as we did before
if you have please a solution via twrp because it works but not the s6 edge help me and I'm on windows xp 32bits
Click to expand...
Click to collapse
Oh you have the edge variant, take here is the link :
https://dl.twrp.me/zerolte/
Take the last one ( 3.1...) its a .tar file and put it in AP section then reboot in download mode and flash

Guide : How to fix Software issues or Red light of death of Xperia C2305 / CS39H

So first off all what is red light of death It a hard brick state of Xperia C2305/CS39H and it is mostly caused when you are installing a cwm recovery and that won’t match the S1 boot version of your device. Also it is caused by software update not properly installed some errors or incorrect rom flashing not suitable for your device. So before starting to the repairing process read the notes.
Notes :
1. This is official way to recover the device so the warranty will not be voild.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.. You can use this process for any Xperia device having software issues ,hard brick , soft brick or bootloops any errors can be fixed by this.
3. In this process your stock android will be reinstall and all your data will be wiped so before starting. Take a backup from dr fone brick data repair download link is attached below you can download it and I will soon make a tutorial how to use it.
4. It is a stock rom so if you have unlocked bootloader it will not work you have to use unofficial flash tool to flash the rom.
5. If you face any issues during installation replay me below. Also read everything before starting.
6. You can proceed to the fix
So here how to fix it !!
Required :
1. Bricked Xperia C2305 or CS39H (softbrick , hardbrick ,any software issue, bootloops)
2. Windows PC or Mac but this procedure is only for Windows PC
3. Good Usb cable or Original cable best
4. Charger 800 mah or more. best way use original charger
5. Xperia Companion installed ( download link below windows only)
6. Xperia C2305/ CS39H USB drivers installed( download link below)
7. Proper high speed internet ( 800 kbps or more best 2 mbhs)
8. Time aprox 4hrs or more up to your internet speed
NOTE : BEFORE STARTING THIS OPEN THE BACK COVER OF THE DEVICE AND TAKE SOMETHING POINTED AND PRESS THE RESET
BUTTON WHEN YOU ARE CONNECTED TO THE PC WITH GREEN LED SHOWING THIS WILL WIPE THE THIRD PARTY CWM OR ANY RECOVERY ON YOUR DEVICE. IF YOU DONT THE UNSUPPORTED RECOVERY WILL BLOCK THE INSTALLION PROCESS. ONCE DONE FOLLOW THE STEPS.
So here the steps :
STEP ONE : See wheater your device is charged 80 % or not it is necessary because when you are in download mode alot of battery is consumed . Battery will not charge directly because device is non stop getting in download mode while charging consuming all the battery what is charged so how to charge battery First see the above notification led is off or on it is beside the front facing camera if its is on then the device is on off it by holding power button for 15sec once led is off insert usb and charge it again the above red led will on again off it by holding power button for 15sec Note disconnect the charging usb from device before pressing power button. Repeat this for 1 or 2 hr. Once done go to next step.
STEP TWO : First install Xperia C2305 / CS39H USB driver and then download Xperia Companion on your PC and open it then hit software repair chose smartphone and the hit click here. Once done it will download the drivers. Once done go to step three.
STEP THREE : hold power button for 15 sec then leave power button and hold vol- and insert the usb abd connect to pc don’t leave it until Xperia Companion detect it and leave the vol- and press next i agree all then it will download the OS of your device. NOTE : KEEP IN MIND OS SIZE IS APROXIMATELY 700 MB SO DATA CHARGES MAY APPLY I AM NOT RESPONBLE IF YOU HAVE TO PAY MORE FOR DATA PROCEED AT YOUR OWN RISK . Once done go to step four.
STEP FOUR: Disconnect the Usb and the start the device. First time will take 15 min or more to boot then select language and all the step up you are done.
CREDITS :
Me ( for explaining how to do this)
Sony Mobile Communication ( for making Xperia Companion)
Wonder share ( for making dr fone )
HIT THANKS IF THAT WORKS AND COMMENT BELOW IF YOU HAVE ANY PROBLEM IN ANY PROCESS. I WILL HELP YOU ASASP.
Download links :
Xperia Companion :
http://www-support-downloads.sonymob...aCompanion.exe
Xperia C2305 / CS39H USB Drivers :
https://developer.sonymobile.com/downloads/drivers/xperia-c-driver/
Dr fone offical download page :
https://www.google.co.in/url?sa=t&so...ZVGc8N9D8wOZ-Q
THANK YOU FOR READING
What is the reason for sudden death ?
I never roooted or installed roms to my phone and it suddenly died ! No boot or recovery ! why ? Is there something wrong with sony's software ?My phone is xperia c2305 ... I took it to service center three times and after a few week from repairing it,it always dies again ? So if install a custom rom ,will the problem be gone ?I also want to know how to install the drivers ... I downloaded it but I don't know what to do with it.
Khalid Zaki said:
I never roooted or installed roms to my phone and it suddenly died ! No boot or recovery ! why ? Is there something wrong with sony's software ?My phone is xperia c2305 ... I took it to service center three times and after a few week from repairing it,it always dies again ? So if install a custom rom ,will the problem be gone ?I also want to know how to install the drivers ... I downloaded it but I don't know what to do with it.
Click to expand...
Click to collapse
This is because your mother board has some issues if you have ever hard ware damage this is not new thing. Installing custom rom is not different then using stock the custom rom for xperia c are just stock themed so better dont install but sometimes it might able to slove the issue try installing custom rom. And the thing how to install drivers on yout windows pc charge the battery as shown in my guide then connect the usb to pc the go to control panel you will see the device as unidentified device click on it then search for driver on internet it will surely fail to find the hit browse then select the un zip driver file and select the driver it will install it you are done hit thanks if it works best wishes.
Khalid Zaki said:
I never roooted or installed roms to my phone and it suddenly died ! No boot or recovery ! why ? Is there something wrong with sony's software ?My phone is xperia c2305 ... I took it to service center three times and after a few week from repairing it,it always dies again ? So if install a custom rom ,will the problem be gone ?I also want to know how to install the drivers ... I downloaded it but I don't know what to do with it.
Click to expand...
Click to collapse
There might be some problem with your Phone's hardware. If it's still under warranty, maybe the company can replace your device but at least they can try to repair it for free.
I did what the topic said but xperia companion gives me an error .. please heeeelp !!
Maxx_Yamano said:
For using Xperia companion without error you need a fast internet connection or else it will show UE installation failed it needs faster internet so its not fault of guide as I my self repair my Xperia C from Hard Brick.
Click to expand...
Click to collapse
I have a download rate reaches to 250 KB/s
Maxx_Yamano said:
Lol its too slow mine is 6 mb per sec speed
---------- Post added at 09:15 AM ---------- Previous post was at 09:13 AM ----------
Lol its too slow mine is 6 mb per sec speed which windows you are using also how much bits ? Tell me I will help you in troubleshooting also can u add the screen shot showing error
Click to expand...
Click to collapse
I am using windows 10 (32 bit)
Screenshot for the error ..
Maxx_Yamano said:
Lol its too slow mine is 6 mb per sec speed
---------- Post added at 09:15 AM ---------- Previous post was at 09:13 AM ----------
Lol its too slow mine is 6 mb per sec speed which windows you are using also how much bits ? Tell me I will help you in troubleshooting also can u add the screen shot showing error
Click to expand...
Click to collapse
Maxx_Yamano said:
Xperia Companion can't connect to server please uninstall it and download from my thread https://forum.xda-developers.com/so...fix-software-issues-red-t3578944/post72438460
Click to expand...
Click to collapse
okey , i will try
Maxx_Yamano said:
Xperia Companion can't connect to server please uninstall it and download from my thread https://forum.xda-developers.com/so...fix-software-issues-red-t3578944/post72438460
Click to expand...
Click to collapse
I tried twice but the download reaches to 1/3 of the bar then gives me the same error .
Maxx_Yamano said:
Xperia Companion can't connect to server please uninstall it and download from my thread https://forum.xda-developers.com/so...fix-software-issues-red-t3578944/post72438460
Click to expand...
Click to collapse
I tried twice but it reaches to the 1/3 of the bar then gives me the same error ..
Maxx_Yamano said:
Hey mody3bdo sorry for not answering you I was busy in making my ROM for XPERIA C now I am free I can help you out but for that I need to ask you some questions answer me ASAP so I could assist you
Q.
- Which PC you have ?
- Is your device C2305 ?
- Have you installed ADB drivers of your device ?
- Where it goes 1/3 does it started to download the OS means does it showed you to connect your device or you haven't yet installed just installzing ?? (This is very imp )
- Does your device Hard brick or Soft brick
---- ALSO YOU CAN CHECK UPDATED VERSION OF THIS GUIDE
OVER HERE https://forum.xda-developers.com/sony-xperia-c/help/how-to-fix-dead-xperia-device-reinstall-t3612413 ----
HIT THANKS TO SUPPORT ME & MY WORK ALSO DONT FORGOT TO COMMENT BELOW
Click to expand...
Click to collapse
-My pc ia an hp laptop and i tried to use xperia companion on my desktop pc but the same problem
-yup my device is c2305
-I couldn't install adb drivers as nothing appear in the device manager
- yup it starts to download the os after (initializing) and connecting my device
- i think its a soft break as it just gave me an error while booting (Encryption unsuccessful) So I booted into recovery and selected (WIPE DATA/FACTORY RESET) , So I got into a bootloop , it just stuck on SONY logo .. So I am trying to repaire it to face that error (UEupdatefailed UE2005)
Thanks for helping
Sent from my SM-G530H using XDA Labs
Maxx_Yamano said:
Hey bro don't worry there is a will there is a way remove the back cover of your xperia take some pin or pointed object then hit the rest button wait for some time if your device gets on you are ready if you have got your device stuck due to wipe data factory reset then its not a brick you are stuck on boot logo so might Wmshua works if you have ever flash it using it or else it useless try pressing reset switch back might help you
DON'T FORGOT TO HIT THANKS IF YOU LIKE ME POST THAT WILL HELP ME
Click to expand...
Click to collapse
I tried with a pen but i face a problem with wmshua (flash failed undefinied )
Sent from my SM-G530H using XDA Labs
Maxx_Yamano said:
Might be a hardware damage I would recommend to go to service shop they will flash it will take 250-500 ₹
Click to expand...
Click to collapse
Okey thanks man but is there any other method to try ? As the shops in here dont work on xperia c ?
Sent from my SM-G530H using XDA Labs
Sony c encryption unsuccessful
I use this guide and problem not solved
Any solve please?
Maxx_Yamano said:
Hello guys this guide is out dated ... If you wish to try it then just go to my guide over here : https://forum.xda-developers.com/so...fix-software-issues-red-t3578944/post72438460
HIT THANKS TO SUPPORT ME & MY WORK ALSO DONT FORGOT TO COMMENT BELOW
---------- Post added at 01:30 PM ---------- Previous post was at 01:23 PM ----------
Hey mody3bdo sorry for not answering you I was busy in making my ROM for XPERIA C now I am free I can help you out but for that I need to ask you some questions answer me ASAP so I could assist you
Q.
- Which PC you have ?
- Is your device C2305 ?
- Have you installed ADB drivers of your device ?
- Where it goes 1/3 does it started to download the OS means does it showed you to connect your device or you haven't yet installed just installzing ?? (This is very imp )
- Does your device Hard brick or Soft brick
---- ALSO YOU CAN CHECK UPDATED VERSION OF THIS GUIDE
OVER HERE https://forum.xda-developers.com/sony-xperia-c/help/how-to-fix-dead-xperia-device-reinstall-t3612413 ----
HIT THANKS TO SUPPORT ME & MY WORK ALSO DONT FORGOT TO COMMENT BELOW
Click to expand...
Click to collapse
hi, im in this same situation but after reading the replies i discovered I'm installing drivers not the proper way, thanks in somewhere in page 2. will try my luck again later today, I'm using win 7 32bit if that matters. also is there any other way to charge my device internal battery? I'm suspecting it's battery is almost depleted. coz everytime i connect my phone to usb, it shows unknown device with a steady red light indicates it recognize the device in my pc. but disappears around 10secs maybe as soon the led light starts blinking. if i charge the device in doesnt show any charging animation or led it just turn on by itself on sony logo then reboot on endless loop when charging on a wall charger
xperia companion give error
UEGetPhoneInfoMissungInfo this error msg is given by xperia companion
is there a guide for Xperia C3 Dual D2502?

Categories

Resources