Related
FULLY WORKING VOICE/VIDEO CHAT! Two-Way Video and Incoming Calls for 2.3+
5/4/2011
UPDATE!
lithid-cm has incorporated the updated GoogleServicesFramework.apk I FOUND into his Flashable GAPPS Update here:
http://www.mediafire.com/?92475r3frlncg29
Just Flash, Wipe Dalvik and Cache, and you are set!
Thanks everyone, for jumping in, flashing, and figuring it out with me! I'm sure this will be incorporated into all 2.3+ roms very, very soon.
(Anyone tried this on 2.2? Its a long shot, but might make some progress if I had testers)
All ROMS:
- Switching to the back camera causes a FC. This is probably hardware/lib oriented, so I am not going to chase after this one. If anyone has ideas for how to fix it, I'd be glad to give it a try.
Working:
CM7 2.3.3 (7.0, Nightly 57 and 62 Confirmed)
Decks 1.0
MIUI 1.4.22
Ginger-Alev1 (SENSE)
Other ASOP ROMS should work too...
Working w/ Some Issues:
- Some Sense-based ROMs (Fresh, Caulkin, etc) have an issue where the camera will not rotate with the gyro, and Gmail users will see you sideways. Again, no idea what causes this, but open to suggestions.
Not Working:
[KERNEL] Tiamat 4.0.0
ARCHIVE:
5/3/2011
UPDATE!
I just Wiped completely, installed CM7 (nightly 57) and got it working again from scratch.
The simplified version:
1) Flash 2.3.4-GAPPS from here:
http://www.mediafire.com/?p05q54839gjzt
2) Push GoogleServicesFramework.apk to /system/app and set permissions to RWX (Link on the OP)
3) Reboot Recovery, Clear Cache and Dalvik
4) In Android, Manage Applications, Wipe data for GoogleServicesFramework and Google Talk
5) Make a test call, and let me know how it goes.
Worked FLAWLESSLY for me on CM7 2.3.3 (57)
If I get more responses, Ill start a more detailed thread (with Flashable ZIPs and whatnot) so that more people can get access to this.
5/1/2011
UPDATE:
I am running option #1 below with a few modifications:
I took a stock 2.3.4 ROM from the NEXUS S forum (where they have gTalk working courtesy of google) and unpacked
I pushed the following to /system/app with standard app permissions:
CameraGoogle.apk
GoogleServicesFramework.apk
googlevoice.apk
(all attached)
Reboot to recovery, wipe dalvik and cache, and POW
Working Video Chat!
I don't know which APK fixed it, but i know they were patched in the 2.3.4 update... and it is working...
I don't have time to look into it right now... but feel free to give it a try on other ROMS and let me know how it goes.
Resolved Issues:
1. Incoming calls are received!
2. Outgoing Calls connect, and Video is Transmitted!
Known Issues:
1. Switching to rear camera STILL FC's (prob a camera driver, not software)
4/30/2011
Google Talk Video/Voice Chat Finally working...
UPDATE: There are now quite a few methods for installing Google Talk 1.3 (with video chat):
1. Flash the 2.3.4 Stock Gingerbread Port by lithid-cm (which I find to be the most reliable... and Stable!) and the latest GAPPS
http://forum.xda-developers.com/showthread.php?t=1056101
3. Flash the latest GAPPS from the above post onto any Gingerbread based system (2.3+) which still FC's for me sometimes
2. Install the APK and modify permissions manually (I have had limited luck with this method... FC's sometimes)
http://forum.xda-developers.com/showthread.php?p=13402925#post13402925
3. Flash the GTALK.zip package from this post. I have not tried it but some people have had results
http://forum.xda-developers.com/showpost.php?p=13330426&postcount=20
If anyone figures anything else out, please let me know.
link to the gapps?
dadoc04 said:
link to the gapps?
Click to expand...
Click to collapse
http://www.mediafire.com/?nmyy2x2p72ptcd7
When I try it with someone using gmail, I can see them, but they cannot see me...
it doesnt work for me at all on cm 7.0.0.2 all my google apps are broken now
No go on the desire rom
I used a loopback gmail ID, and saw myself (with a lag). try this address: [email protected]
But voice is working?
addisonhammer said:
I used a loopback gmail ID, and saw myself (with a lag). try this address: [email protected]
But voice is working?
Click to expand...
Click to collapse
Voice is definitely working if I do a voice call, but on a video call it seems to only be one way...
Since it was intended for the Nexus S... it is likely you need an ASOP ROM for this to work.
whats funny is google pulled google talk from the market.....
It doesn't work though. on my CM7 it crashes when you try to make a voice call.
addisonhammer said:
Since it was intended for the Nexus S... it is likely you need an ASOP ROM for this to work.
Click to expand...
Click to collapse
Yes, I am using CM7.
installed fine and showed vid cams beside names....
forced close when connecting.
dadoc04 said:
worked for me... im on nightly 57
just wiped cache and dalvik before flashing the newest gapps
Click to expand...
Click to collapse
I'm on latest CM release (7.0.2) and it FC's for me. I tried to wipe cache and dalvik and clear data for Talk but still FC.
^^ sorry about that... i was editing my post as you quoted me
Let me know if it continues to work... mine broke for some reason and FC's now. When I make voice calls... it will connect and work AS the FC window comes up, and continues to work until i click FC.
I didnt reboot or anything... just stopped working. Tried reflashing and clearing cache... no luck
lame.
CM 7.0.2.1 FC on my end. I can see the Cam icon but as soon as I tap on it, it FCs
I'm running a asop rom, going to flash now and see
Sent from my HTC EVO 4G Android 2.3.3 using Tapatalk Premium
CM 7.0.2.1 here. Flashed update. Wiped Dalvik. Cleared Talk app data. FCs when I tap a video cam icon. The libTalk_jni.so file you mention isn't in the .zip nor did it get installed on my device in /system/lib.
keanon said:
CM 7.0.2.1 here. Flashed update. Wiped Dalvik. Cleared Talk app data. FCs when I tap a video cam icon. The libTalk_jni.so file you mention isn't in the .zip nor did it get installed on my device in /system/lib.
Click to expand...
Click to collapse
What hardware version are you on ? i'm V.3
Hi all,
yesterday i installed the aokp_p500-ota-eng.parvez.beta-v2.30042012.zip. I tried several ways to install the google play.apk and the mod ones - it is not working - closes after opening.
can anyone help?
greetz
optimus
OptimusHell said:
Hi all,
yesterday i installed the aokp_p500-ota-eng.parvez.beta-v2.30042012.zip. I tried several ways to install the google play.apk and the mod ones - it is not working - closes after opening.
can anyone help?
greetz
optimus
Click to expand...
Click to collapse
1. Did you flash Gapps
2. Did you do a full wipe before flashing aokp
3. Have you tried to clear cache and wipe data under google play app managment in settings.
Hi, s.d.
s.d.oconnor said:
1. Did you flash Gapps
No - just search the forum and google for a tutorial. Where do i find the google pack for my device
2. Did you do a full wipe before flashing aokp
Think so, because i did it step by step and followed all instructions.
3. Have you tried to clear cache and wipe data under google play app managment in settings.
How do i do that?
Click to expand...
Click to collapse
Thx for your answer and sorry for the "stupid" questions, i am totally new to this.
Its not a stupid question its quite a common problem. For gapps you can get them here, i am not sure if the rom you are running is Gb or ICS but you will need to download the relvent gapps for the relvent firmware.
Gapps - gapps gives you all the apps from google like google play, maps, google music, google search e.t.c
Are you able to get an error message with "adb logcat" when plugged in to the computer? Often it won't show the actual error on the screen. If you still get the error please post
I am starting this thread so all issues related to SlimKat Rom can be documented in one single place. Please post your Questions & Answers in here instead of in the SlimKat Rom Thread, lets try and keep that thread clean.
SlimKat ROM Thread: http://forum.xda-developers.com/showthread.php?t=2511512
All Credit goes to the developers, Please support them for continued development
I will try my best to keep the thread updated and have questions and solutions posted in the first three posts of this Thread:
How to Install SlimKat ROM
Assuming you have already rooted, unlocked boot loader and installed custom recovery. If not there are multitude guides to do so, search in the forum.
Step 1:
Download the following:
Current SlimKat ROM: http://slimroms.net/index.php/downloads/dlsearch/viewcategory/979-hammerhead
Note SlimKat Rom is in beta currently
Current SlimGapps: http://slimroms.net/index.php/downloads/dlsearch/viewcategory/978-addons4-4/downloads/dlsearch
Note Slim Gapps are also in Beta, You can choose to download the full Slimgapps or the minimalgapps thats your choice. You can also download the photosphere addon.
Current SuperSu: http://forum.xda-developers.com/showthread.php?t=1538053
Step 2:
Place the downloaded file onto your nexus 5 using the provided cable, alternatively you can also download the files directly onto your phone using the browser.
Reboot into Recovery
Wipe data/factory reset (required)
Wipe Cache Partition (required)
I also always do the following (optional)
In mounts/ Storage
Format /system (optional)
Format /data (optional)
Format/cache (optional)
These are not necessary but I have made it a habit to do so.
Once you have performed the required resets, select Flash Zip file and flash in the following sequence
Flash SlimKat Rom
Flash SlimGapps
Flash SlimPhotoSphere (optional) Note: Does cause audio lag in recorded video with some kernels also videos are darker after photosphere flash. See Q&A section
Flash Kernel ( optional: only if you want to use a custom kernel)
Flash SuperSu ( I prefer SuperSu, SuperUser does not work properly for Me)
Reboot
Now your good to go and setup your phone.
Step 3: (optional)
~ Note for ART I follow this procedure:
After Flashing, once the phone starts I skip through the setup screen
Go to Settings-> About-> tap on build 7 times to enable developer options
Go to Settings-> Developer Options -> Select Runtime --> Art
Reboot and let it finish what its doing takes 10-15 mins.
Once done setup your phone how you like.
Reserved : Guide To SlimKat Features
Features And Guide
Once I have time I will break down all the slim settings and what they do
Features Not Included
PIE - Can be installed using Xposed Framework
HALO - Can be installed using Xposed Framework
NOTE: Xposed Framework does not play nice with ART, You will need to stick with Dalvik to use Xposed.
Feature Request
I will update this as users request features but please dont request features that can be added via addons such as xposed. There is no point adding those features to the ROM, those who want them can always install via Xposed
Keyboard Automatically Switching to Numeric Keypad when a field requires numbers only
Questions and Answers
Frequently Asked Question
http://slimroms.net/index.php/faq
These Are for SlimKat 4.4.2 beta 1.95 + Slim_AIO_gapps_4.4.2 beta1.x
These will be updated/removed as SlimKat updates
DPI/ Screen Issues
[Q] What are the default DPI's
Stock Kitkat = 480
Stock SlimKat = 361
Lowest DPI working for me = 370
[Q] Water in the Google Maps app is distorted, streaked or all over the place when zoomed out
Its a DPI issue, this is how i resolved it:
Download: Rom Toolbox lite ( Free) from PlayStore
Run app -> Swipe left to switch tab to performance --> click build.prop Editor button
on this new screen-> swipe right to bring out menu on the left side of the screen
First option is LCD density Click that-->change Value to whatever you want --> click ok and reboot
once Rebooted do the following :
Settings-> Apps-> Maps-->clear data, also clear Cache--> Force Close
Open Maps and confirm everything is working.
Some users have been able to get the maps to work properly at 361 DPI, but the lowest value at which it will work for me is 370. Default Stock Kitkat DPI is 480. Default Stock SlimKat DPI is 361
[Q] Everything is too small on default SlimKat, how can i fix that
two solutions:
go into settings-->display-->font-->change font size to make it bigger
change DPI:
Download: Rom Toolbox lite ( Free) from PlayStore
Run app -> Swipe left to switch tab to performance --> click build.prop Editor button
on this new screen-> swipe right to bring out menu on the left side of the screen
First option is LCD density Click that-->change Value to whatever you want --> click ok and reboot
Default Stock Kitkat DPI is 480, stock SlimKat DPI is 361, 400 ~ 420 DPI works best for me
Recovery
[Q] TWRP asking for a password, even though user never setup a password
When TWRP asks for a password, hit cancel.
Then go to Wipe and Factory Reset.
If that doesn't work, then restart your recovery.
If that still doesn't work then try reflashing TWRP again.
Camera
[Q] What is True View in the Camera App
True view is a camera feature to show the whole field of view of the camera.
By default the field of view is stretched and cut on the sides to fit fullscreen.
http://slimroms.net/index.php/faq/slimbean/323-what-is-true-view
[Q] Why is the Camer app Missing HDR+
HDR+ and Photosphere are closed-source. AKA no way to be built from source and must be distributed as an add-on.
Flash photosphere camera if you want HDR+.
http://forum.xda-developers.com/showpost.php?p=48832042&postcount=27
Note: PhotoSphere Addon currently adds a audio lag in recorded videos and recorded Videos are much darker, Read Q&A below about audio lag when photosphere is installed, link for photosphere is in the first post ( Slim gapps/addons)
[Q] Audio Lag in recorded video after Installing Slim PhotoSphere
Flash a different kernel, that will fix the issue
confirmed fixed with trinity.
in Recovery, without wiping:
Flash ROM
Flash Gapps
Flash PhotoSphere
Flash Kernel of choice
Flash SuperSu
Reboot
NOTE: Videos are much darker when Photosphere addon has been installed
Misc
[Q] How do I access the chamber of secrets on SlimKat
http://forum.xda-developers.com/showpost.php?p=48830608&postcount=25
[Q] Where are the QuickRecord recordings stored, are they cleared at boot and are they overwritten
/data/data/com.android.systemui/files/
It's never cleared from a reboot, but yes, rewritten each time you record.
http://forum.xda-developers.com/showpost.php?p=48832011&postcount=2577
[Q] Where is the clear all in the recent apps list
Clear all is not there as it is not needed, the list just shows the recently ran apps and provides the means of switching between apps quickly. Android will kill apps when needed there is no need to kill apps
[Q] I have no Mobile Network ( not data but no coverage at all)
This applies to only those who have no mobile network i.e they do not have a signal at all on their device and it does not say no service.
You somehow wiped the radio firmware, That needs to be restored.
http://forum.xda-developers.com/showthread.php?t=2514095
[Q] What is ART and what does it do
If you really need to know what ART is then you should not be using ART.
ART stands for Android Run Time, it is an experimental run time which is being developed by google to replace the current dalvik run time. Once released users would be able to get better performance and better battery life.
Currently, as ART is in experimental stage ( I would say Alpha, not even beta) the benefits of switching to ART are minimal. Not all apps are compatible with ART and most users will not see any performance or battery life improvements.
Thats why google buried it deep into the settings. Use at your own discretion. I suggest staying with Dalvik run time till further progress has been made on ART.
Un-Answered Questions
reserved
Regarding the last Q: Modem and EFS restoration is explained here: http://forum.xda-developers.com/showthread.php?t=2514095
Sent from my Nexus 5 using Tapatalk
lyrois said:
Regarding the last Q: Modem and EFS restoration is explained here: http://forum.xda-developers.com/showthread.php?t=2514095
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thanks, updated the Q&A
One last question...screen recording how do I get that again...?
Sent from my Nexus 5 using Tapatalk
Galaxysm said:
One last question...screen recording how do I get that again...?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I'm not sure how to get that, I think you have to connect the device to the computer and use something in the SDK to be able to record screen, I could be wrong. Try searching for it. If I find a solution I'll let you know.
Sent from my Nexus 5 using Tapatalk
just a suggestion what do you think to move this thread to here
http://forum.xda-developers.com/custom-roms
would be more centralized and maybe more ppl would see the q&a thread
kufikugel said:
just a suggestion what do you think to move this thread to here
http://forum.xda-developers.com/custom-roms
would be more centralized and maybe more ppl would see the q&a thread
Click to expand...
Click to collapse
Yes, i think that would be better. My Apologize for starting the thread in Q&A section. Could a Moderator please move the thread to the custom rom Q&A section or if someone knows how to move it let me know and ill move it.
Thanks
Nice work.
maybe add LMT to the "Features Not Included: PIE" section
shawnbon206 said:
Nice work.
maybe add LMT to the "Features Not Included: PIE" section
Click to expand...
Click to collapse
Thanks.
I am not sure if and when PIE is implemented if it would include LMT with it therefore i left it out. I believe the xposed framework PIE does have LMT support.
Hope there are enough people here to help me out. I've been using Slim ROMs for a couple years on G-Nex and now Nexus 5. On the last couple releases I've been having issues with Google Maps not getting a GPS fix, or when it does get a fix it's off by nearly a mile. GPS Data, Waze, Gas Buddy, etc. all work fine. After spending nearly a day re-flashing the ROM, app, clearing data, etc., I finally tried another ROM (Purity) and discovered that Google Maps gets a fix in less than 10 seconds and is within 20' accuracy. I used the latest Slim Gapps on Slim 1.95 and the CM Gapps on the Purity ROM. Has anyone had similar problems?
From my Nexus 5
AquilaDroid said:
Hope there are enough people here to help me out. I've been using Slim ROMs for a couple years on G-Nex and now Nexus 5. On the last couple releases I've been having issues with Google Maps not getting a GPS fix, or when it does get a fix it's off by nearly a mile. GPS Data, Waze, Gas Buddy, etc. all work fine. After spending nearly a day re-flashing the ROM, app, clearing data, etc., I finally tried another ROM (Purity) and discovered that Google Maps gets a fix in less than 10 seconds and is within 20' accuracy. I used the latest Slim Gapps on Slim 1.95 and the CM Gapps on the Purity ROM. Has anyone had similar problems?
From my Nexus 5
Click to expand...
Click to collapse
I just reflashed slimkat on my phone, took less then 5 seconds for it to get a GPS lock. Check the following:
Settings-> locations -> mode
Make sure high accuracy is selected
Also are you using a custom kernel ?
Flash sequence for ROMs is
Slimkat ROM
Slimgapps
Kernel ( if using custom kernel)
Supersu ( supersu always comes last)
Reboot.
Sent from my Nexus 5 using Tapatalk
Anyone have any issues with the stock Slim Explorer app. I've never really used it before as I've always been an ES Explorer user but want to switch having the auto toggle TRDS modes. The app loads up but as soon as I scroll the screen the app closes and I get a "Slim Explorer has stopped" message. I've seen it in the past a handful of times I went to change DPI with it before installing ES. I did a complete clean install(ie. manually wiped everything and re-downloaded and re-setup all my apps instead of restoring them with Titanium), sha matches, so I can't think of anything else that could be the issue. Maybe it doesn't agree with Super SU???
Yep, did all that except for the SuperSU bit. I did use SuperSU on the Purity install though but haven't had any problems with the built in Superuser before. I'll nandroid back to the Slim ROM to give it a try. It was with the stock kernel.
From my Nexus 5
AndrasLOHF said:
Anyone have any issues with the stock Slim Explorer app. I've never really used it before as I've always been an ES Explorer user but want to switch having the auto toggle TRDS modes. The app loads up but as soon as I scroll the screen the app closes and I get a "Slim Explorer has stopped" message. I've seen it in the past a handful of times I went to change DPI with it before installing ES. I did a complete clean install(ie. manually wiped everything and re-downloaded and re-setup all my apps instead of restoring them with Titanium), sha matches, so I can't think of anything else that could be the issue. Maybe it doesn't agree with Super SU???
Click to expand...
Click to collapse
U mean simple explorer ?
Its working for me.
It could be super user, I've had issues with it
First post on this forum has link to supersu, download zip file flash in recovery. C if that solves the issue
Sent from my Nexus 5 using Tapatalk
AquilaDroid said:
Yep, did all that except for the SuperSU bit. I did use SuperSU on the Purity install though but haven't had any problems with the built in Superuser before. I'll nandroid back to the Slim ROM to give it a try. It was with the stock kernel.
From my Nexus 5
Click to expand...
Click to collapse
I've had issues with super user so always use supersu, but maps has nothing to do with either.
Did u check the settings?
Also sometimes you have to be outside to get a GPS lock,
Also try this:
Settings -> apps-> maps.
Clear data clear cache force close.
Reboot
Go outside and open maps c if that fixes it
Sent from my Nexus 5 using Tapatalk
OK, but it will be a while - when I went into recovery (TWRP) it asked for a password (which I haven't set) then failed to backup the existing ROM.
Sent from my Nexus 5 using Tapatalk 2
fruitsalt said:
U mean simple explorer ?
Its working for me.
It could be super user, I've had issues with it
First post on this forum has link to supersu, download zip file flash in recovery. C if that solves the issue
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I have Super SU installed and working already seeing as I use Faux kernel as well as I've always had issues(even on a SlimBean port on Evo LTE)with Superuser unmounting the system as RW. It's weird. It only happens when I scroll from within the emulated/legacy/0 storage. I can scroll within the device partition and change settings just fine.
Do you use ART??? Only other thing I can think of.
Edit: Added a screenshot to the post as well as a bug report
Hello,
I am having issue with my camera "can't connect to the camera" on oneplus one (64gb).
Recently i formatted my system data using TWRP and after that it showed NO OS INSTALLED. So i downloaded nightly build from cyanogenmod's website and sideloaded the build in fastboot mode with gapps as well. During this process l lost recovery & backup, & encountered Can't connect to the camera issue, Please Help.
Everything was working properly even after this my device was much lightning fast & smoother.
But when i opened my Google camera then it displayed Can't Connect to the camera. I did almost all the things-
1. Firstly restarted the device to check whether it can be fixed by this method or not but my issue didn't resolve then i force stopped camera by clearing cache & data & then restarted the device but still same pop up appeared. On some forum thread's i also found that by installing app "Camera (CMFix) for Cyanogenmod" from play store will fix this issue, but app was not getting launched my problem didn't get resolve.
2. After getting all this issue i thinked to install snapshot build to check whether i can use my camera but this thing didn't work as well.
3. On so many forum's i found that changing the ROM will fix this issue so i downloaded Paranoid Rom and installed it but still my issue with camera didn't resolve.
I am following XDA forum as viewer since so years time and also i know that from here i can get fastest solution.
This is my first post on XDA developers cause i didn't find solution for this issue
Please please help me as i did almost all thing to fix my issue. I am ready to do anything to solve this issue. Please help
what version of gapps did you installed? in order for the camera to work you must install the "mini or micro" gapps package, when you are running AOSP, somehow the complete gapps package breaks the camera.
you can get the micro gaaps package from PA, it works for me https://www.androidfilehost.com/?w=files&flid=15797
livito said:
what version of gapps did you installed? in order for the camera to work you must install the "mini or micro" gapps package, when you are running AOSP, somehow the complete gapps package breaks the camera.
you can get the micro gaaps package from PA, it works for me https://www.androidfilehost.com/?w=files&flid=15797
Click to expand...
Click to collapse
To clarify this, you can install any gapps package as long as it doesn't contain a camera.
Transmitted via Bacon
I did this once and had to flash cm11s once and then whatever rom I wanted after that in order to have a working camera.
I have cust rom CM11 for my GT-S7270, this stable but some bug I cant fix. for example :
1. Camcorder cannot recorded well, I try to install some app 3rd example snap camera, but still cannot recorded...
2. Some app 3rd example path and path talk have force closed for 1-2 minute after opening thats app...
3. I can't find drive/driving mode on thats rom,
somebody can fix thats?
sake022 said:
I have cust rom CM11 for my GT-S7270, this stable but some bug I cant fix. for example :
1. Camcorder cannot recorded well, I try to install some app 3rd example snap camera, but still cannot recorded...
2. Some app 3rd example path and path talk have force closed for 1-2 minute after opening thats app...
3. I can't find drive/driving mode on thats rom,
somebody can fix thats?
Click to expand...
Click to collapse
If you could ensure first that you have the latest version of cyanogenmod, you can do this by: settings > about phone > cyanogenMod updates.
1 + 2. to try fixing force close and the camera issues, go to settings > apps > the app that has the issue > clear defaults.
This should help with a lot of force close issues and hopefully the camera. Then if you could restart the device and let me know how that goes for you we can take things from there
3. car home has not been included in Cyanogenmod since CM7 I'm afraid, however there are some excellent 3rd party apps that do the same job You can see them here
Hope this helps
I try clear data but bugs camera still cannot recorded video only, but this help. :good:
the issue with your camera, is it that it just will not record at all or do you have poor quality video?
mbloomer04 said:
the issue with your camera, is it that it just will not record at all or do you have poor quality video?
Click to expand...
Click to collapse
my isue on camera just can't record on video...:crying:
sake022 said:
my isue on camera just can't record on video...:crying:
Click to expand...
Click to collapse
my advice would be to:
A) ensure you have the latest update for CM it could be rectified in a recent update, this can be done by going to Settings>about phone>CM updates
and if that does not work
B) perform a Nandroid back up through recovery mode and then try reflashing CM11 it is very possible that it was just a bug that occurred during flashing let us know how it goes
better try this link;
http://4pda.ru/forum/index.php?showtopic=486975&st=3560#entry36276220
this is for ace 3 gts7270.
i am using it on ace 3 gts7272, no issues for me!
this is the DOWNLOAD link
https://yadi.sk/d/zE-dArDOdBPRF
if you have an issue in downloading then create a new yandex account and then "save to yandex.disk" ,,
and then go to your yandex disk and download it..
NaqiKiller said:
better try this link;
http://4pda.ru/forum/index.php?showtopic=486975&st=3560#entry36276220
this is for ace 3 gts7270.
i am using it on ace 3 gts7272, no issues for me!
this is the DOWNLOAD link
https://yadi.sk/d/zE-dArDOdBPRF
if you have an issue in downloading then create a new yandex account and then "save to yandex.disk" ,,
and then go to your yandex disk and download it..
Click to expand...
Click to collapse
Don't need to create new account, just click VIEW, then ready to go