Related
In this thread i am only referring to the WiFi/Bluetooth clash that seems to affect some of us but not all of us.
ie; The problem appears to be with the WiFi, WiFi fails to disconnect when leaving the ssid area. Wont reconnect when returning to the area, the WiFi connection just cycles, hunting and hunting, never connecting..... until i turn the Bluetooth off, then it connects within seconds. Switching off the Bluetooth appears to eliminate a 2.4ghz clash between the wifi and Bluetooth, allowing the WiFi to operate freely.
Other phone manufacturers have had to deal with this, its not uncommon.
I've been evolved in a bit of discussion about wifi this week, And i have found I have the WiFi/Bluetooth clash on my twin-core. but not the quad-core.
so i thought we should distribute the version numbers that are trouble free, that seems to me to be a better place to start than with just random testing like i have had to do to get my result... .. so a bunch of test roms later, here are the rom versions i use, and have turned out to be trouble free.
Twincore - Now runs "CleanROM 3", based on build version 1.88.707.2, now runs problem free. I had previously tryed Asian roms 1.77.708.3 & 1.77.708.2, the Modaco IR1(1.29.401.11), all had the W/BT problem.... there were some others that didnt work either but i lost track.
I also tried the wifi fix provided by JSLenterprises but got no relief from that, not on any of the versions i tested.
(To be fair to JSLenterprises, i dont even know if his fix was for this issue, i just tryed it because i was testing anything WiFi for my solution!)
Quadcore - Still running factory 1.29.728.12, always ran problem free!
Anyone else got some build numbers that you know are trouble free? we might be able to narrow down weeks of research for others trying to resolve this bluetooth/wifi clash.... or else wait for the proposed offical update of course.
And anyone having familiar problems might want to flash these versions i suggest, just to make sure i didnt just get lucky.
lets solve this sh..!
You had bluetooth issues, and flashing cleanrom 3.0 fixed them?
what issued did you have? my bluetooth is terrible.
Was person calling me hearing their echo when im on bluetooth one of these problems?? Just bought bloototh for car and receiver hears their own voice, big echo they say
I had no issue with the bluetooth itself...
explanation in opening post........
I've noticed that with various 4.2.x and 4.3 ROMs, the amount of time that it takes my phone to connect to the bluetooth in my Honda Civic varies significantly. Sometimes it's about 1-2 seconds after the car "boots up"... and currently, using liquidsmooth v2.10 and its swtock kernel, it is taking between 15-20 seconds to connect which is rather annoying at times.
So here's my question...those of you who are heavy bluetooth users who might have noticed this variance... which ROM/kernel combo works best for you to get a fast bluetooth connection to your devices?
I've tried dkp and BMS kernels but they don't seem to make a difference which leads me to believe that it's not a kernel "issue" so much as a ROM one.
I appreciate any feedback!
I'm using jelly beans build 19.
I connect to my cat stereo blue tooth about 4 seconds after I enter password..
Sent from my SCH-I535 using xda app-developers app
This past week I've changed radios & ROMs so here's my experience:
Kenwood DNX9980HD & LiquidSmooth 2.9 ROM - sometimes 10 seconds, often had to reboot phone for a 'fresh' try before it would connect. Likely an issue with the HU
Pioneer AppRadio3 (SPD-AH210) & LiquidSmooth 2.9 ROM - Immediately available... but there is a warning message that pops up EVERY time you start the car/radio, so by time I click the OK button for that, BT is connected
Pioneer AppRadio3 (SPD-AH210) & LiquidSmooth 2.10 ROM - Immediately available... but there is a warning message that pops up EVERY time you start the car/radio, so by time I click the OK button for that, BT is connected
I'll likely be going back to LS2.9 because I was able to use DriveLink successfully to use my phone through the radio, and while it connects up on 2.10, it does not auto-rotate to landscape view, so it's not usable for me... unless I can find a setting/tweak/update to resolve that issue. Sucks, because I'm digging the (minor) updates of Android 4.3... c'est la vie...
papadelogan said:
This past week I've changed radios & ROMs so here's my experience:
Kenwood DNX9980HD & LiquidSmooth 2.9 ROM - sometimes 10 seconds, often had to reboot phone for a 'fresh' try before it would connect. Likely an issue with the HU
Pioneer AppRadio3 (SPD-AH210) & LiquidSmooth 2.9 ROM - Immediately available... but there is a warning message that pops up EVERY time you start the car/radio, so by time I click the OK button for that, BT is connected
Pioneer AppRadio3 (SPD-AH210) & LiquidSmooth 2.10 ROM - Immediately available... but there is a warning message that pops up EVERY time you start the car/radio, so by time I click the OK button for that, BT is connected
I'll likely be going back to LS2.9 because I was able to use DriveLink successfully to use my phone through the radio, and while it connects up on 2.10, it does not auto-rotate to landscape view, so it's not usable for me... unless I can find a setting/tweak/update to resolve that issue. Sucks, because I'm digging the (minor) updates of Android 4.3... c'est la vie...
Click to expand...
Click to collapse
I swear, bluetooth can be completely random. Using LS 2.10 for about 4 days now, it was taking 12-15 seconds to connect every time... and this morning it took about 2-3 seconds, similar to how LS 2.9 behaved.
I know I didn't change anything kernel/bt related since the last time I used my car... so there's either clocked-based polling going on or I'll just accept the fact that it's completely random and live with it. I'm not usually a believer of the whole "settling in" theory with roms/etc, but this might make me a one if this 2-3 second trend sticks. I may tinker with some other kernels (after a nandroid backup of course) soon... but honestly this stock LS 2.10 kernel is giving me amazing battery life so I might just stick with it... and Iike I said before, I've seen no evidence in the past that bluetooth connectivity is related to kernels... I think it has to do with some ROM settings as well.
So here's my issue, my Galaxy S Blaze has been switched from ROM to ROM constantly, I have seen ROMS with modified build.props, other added features, and a bunch of other tweaks, you name it! I don't know what all those tweaks mean, I have no idea if it could affect the way my phone receives the signal but it got me so frustrated that I kept switching roms until finally then I went back to stock and am no longer am switching to another ROM.
Here's a history of the ROM switching I've made in the past couple of months:
1st - MIUI
2nd- Cyanogenmod
3rd- Gummy ROM
4th- Liquidsmooth ROM
5th- Cyanogenmod
6th- Dirty Unicorns (problems with signal started occurring right about here, and onwards)
7th- Stock ROM (hmm... nope nothing fixed.)
8th- Validus (still no, I didn't like the constant force-closing of many apps)
9th- Gummy ROM (nope, what's worse is my screen kept freezing if I had atleast 2 apps open and I slid down the notification drawer)
10th- Cyanogenmod (well, maybe switching to cyanogenmod will fix it)
11th- Gummy ROM (*sigh* switching back? Nope, still didn't help my signal)
12th- Stock ROM (you would expect it to be fixed right about here, but nope)
So what's up what is the exact problem with my signal? Here's the thing: My signal works! That's a start atleast. However, if I turn on my Wi-Fi while I'm home, I can still call/text people, all of that works. But after maybe 2 hours or so, the signal bar is still there, it's telling me it has signal and it's connected, SOMETIMES it will be empty meaning I have no signal(when I really do). But in reality, I can't receive texts, nor calls, none of that. So how do I fix it? By restarting my phone sadly, that has been the only solution for me for these past 2 months. People have complained to me because I don't answer my phone anymore, well I'm sorry my phone can't receive those calls due to this messed up signal. There are 3 other T-Mobile phones in the house that have no problem! The problem here is with my Blaze phone.
So what if I turn the Wi-Fi off for the whole day and see if it's the main thing causing the issue? Well, I did this. Turns out that the signal stays on longer than when I'm on Wi-Fi but it still goes out. I have switched SIM Cards, I have tried switching my APN: from "epc.tmobile.com" to "fast.t-mobile.com" but the problem appears to happen more quickly on the "epc" one than the "fast" one. Please help me with this, this has been frustrating me a lot lately. I'm not sure if anyone has even had the same exact problem that I'm having, I've searched online but haven't seen a similar problem.
Some of you might say, wow that is a lot of ROMS you've switched to, I'm sure there were more that I missed but that's as of recent. I can install ROMS correctly, I know how to use CWM when installing a .zip and using Odin when it's a .tar(or other supported file extensions). I've factory reset, wiped the cache, the dalvik cache, all before installing a new rom. After installing each rom, I've also factory reset and wiped the cache to make sure no other problems could affect the way the rom would work. Hopefully I did the procedure right, thanks for anyone who's willing to help me!
Right now I am running:
Baseband Version:
T769UVLH5
Kernel Version:
3.0.8-perf-T769UVLH5-CL990184
[email protected] #1
SMP PREEMPT Fri Aug 17 15:12:14 KST 2012
Android Version:
4.0.4
Another Issue is that I can't even transfer files to and from my phone when connected to my computer! This is another big issue, here are some images:
http :// i.imgur.com/xx699ss.png
http :// i.imgur.com/1wRzJpX.png
Here's what happens when I turn Wi-Fi Calling on but maybe it's just a built-in function that I forgot it had and it's probably normal:
http :// i.imgur.com/cTSqRci.png
By the way, sorry for the links just copy and paste them in a browser to and remove the spaces between the http :// and i.imgur, thanks! Unfortunately, I can't post links until I reach 10 posts. If the links don't work for you, I've also provided attachments.
Many thanks!!!
That last picture does show the proper function of Wi-Fi calling however I don't know what to say about the rest of your problems.
Sent from my SAMSUNG-SGH-T769 using XDA Free mobile app
There are two things I would recommend trying...
1. Use Blackhole System Wipe
I know you've been following all the proper steps in CWM (and I would say to keep doing so), but I've added using Blackhole, in addition to the first steps, and I always get great system performance on my phone, and my parent's phones (I put them on ProvisionMod after stock was being stupid). It works well for pre installation for ANY ROM and helps prevent pesky issues. However, chances are, your issue is baseband related and this probably won't solve it... But still! You never know! It's worth a shot!
2. Reroot your phone
I know this will be annoying and pesky... but sometimes the process goes wrong from the beginning and starts giving issues later on... When I first rooted my mom's blaze, something went wrong, despite my following all the directions, and one of her partitions was completely disabled, no matter the ROM. I redid the process of rooting her phone (not from GB though... From the ICS stock) and fixed the issue instantly! I would try these two steps first and see if they do anything! Good luck!
Sent from The Doctor's Blaze
Hi, i was happy seeing that the dev of the CM/Carbon/Slim-Roms didn't just stop but moved from the old original shabbypenguin-thread to xda
the latest Carbon-Build ( CARBON-KK-NIGHTLY-20140825-0209-peregrine.zip ) finally works for the most part on my side, pretty happy with that.
unfortunately 2 things aren't and i wanted to see if anyone else has this issues or has some idea to solve them
first one is, that WiFi won't connect to all networks - at home on a netgear-repeater everything is fine - in the office it won't connect to D-Link and TP-Link routers.
the other, more troubling issue is that bluetooth isn't working as it should - as long as no device is connected, everything is fine, but as soon as it connects to my car-system (MB C-Class w204 without command if that makes any difference ) the bluetooth-process stops, reconnects, stops again and so on...with my laptop everything seems to be working fine and i think the first drive after coupling also worked fine - any idea what can be the cause of this? never had this kind of problem before, be it stock or older unofficial CM-Builds etc...
i'm refering to this thread btw: http://forum.xda-developers.com/moto-g/4g-development/rom-carbonrom-kitkat-t2847887
regards
Termuellinator said:
Hi, i was happy seeing that the dev of the CM/Carbon/Slim-Roms didn't just stop but moved from the old original shabbypenguin-thread to xda
the latest Carbon-Build ( CARBON-KK-NIGHTLY-20140825-0209-peregrine.zip ) finally works for the most part on my side, pretty happy with that.
unfortunately 2 things aren't and i wanted to see if anyone else has this issues or has some idea to solve them
first one is, that WiFi won't connect to all networks - at home on a netgear-repeater everything is fine - in the office it won't connect to D-Link and TP-Link routers.
the other, more troubling issue is that bluetooth isn't working as it should - as long as no device is connected, everything is fine, but as soon as it connects to my car-system (MB C-Class w204 without command if that makes any difference ) the bluetooth-process stops, reconnects, stops again and so on...with my laptop everything seems to be working fine and i think the first drive after coupling also worked fine - any idea what can be the cause of this? never had this kind of problem before, be it stock or older unofficial CM-Builds etc...
i'm refering to this thread btw: http://forum.xda-developers.com/moto-g/4g-development/rom-carbonrom-kitkat-t2847887
regards
Click to expand...
Click to collapse
*push* nobody got any ideas? i would post it in the appropriate thread (especially since this rom is still only nightly) as a potential bug report, but as a new user i'm not able to :/
just another push...somebody must have any idea on what i can try to either solve or at least track down the cause of the issue(s)
sure enough, the BT-issue is worse..
tried the newest build (dirty update and after that clean flash), but still no luck
Termuellinator said:
just another push...somebody must have any idea on what i can try to either solve or at least track down the cause of the issue(s)
sure enough, the BT-issue is worse..
tried the newest build (dirty update and after that clean flash), but still no luck
Click to expand...
Click to collapse
The WiFi bug is a known issue since early August. It affects almost every Moto device (G, G 4G, X and defy?) it's reported several times to CM-s bug tracking system, but nobody cares... You can use custom kernels. Maybe they aren't affected.
I don't know anything about the BT bug.
i found some posts about people having the same kind of wifi-issue, but it is good to know, that the devs are aware and - kind of - working on it
the BT-thingy is driving me insane though...fiddled around a bit, stopping BT-Related processes etc...this somehow did something...my phone now connects and stays connected, i can make phone calls...but the contact list is incomplete - only 3 random contacts are displayed on the car system
haven't rebooted since then, i kind of fear that rebooting will bring back the issue :/
BT still working after reboot, so it seems my "fix" is permanent...must have something to do with deleting the BT-data/cache while process was killed i would think - in case someone else also encounters this problem
still can't acces all my contacts from Car-system though :/
Most nights roms have a lot of issues and it is pretty hard to stay aware all of bugs. Why don't you try something more stable like Pac Man RC or some. Sometimes a different kernel will help sometimes it's the opposite.
Well, i'd rather use a stable version for sure...
sadly, i didn't know about falcon<->peregrine, so i thought i can use all the Moto G roms with my xt1039...
and to this date there are no stable roms for peregrine that i am aware of - an old unofficial CM-Build worked pretty good for me, but CM unfortunatley doesn't offer all the features i want - carbon covers pretty much most of it, so i'm hoping that it will be "bugfree" soon enough ^^
Termuellinator said:
Well, i'd rather use a stable version for sure...
sadly, i didn't know about falcon<->peregrine, so i thought i can use all the Moto G roms with my xt1039...
and to this date there are no stable roms for peregrine that i am aware of - an old unofficial CM-Build worked pretty good for me, but CM unfortunatley doesn't offer all the features i want - carbon covers pretty much most of it, so i'm hoping that it will be "bugfree" soon enough ^^
Click to expand...
Click to collapse
All AOSP rom uses the CM device tree and kernel as a base, so the low level kernel bugs are the same.. Also the last "stable" CM for falcon is dated back to April, so you didn't lose anything with peregrine...
Just in case anyone encounters the same Issues:
with CARBON-KK-NIGHTLY-20140922-0414-peregrine the BT-Problems seem to be resolved, connection works and the contacts are accessible from the car.
WiFi still has problems with dhcp, but as stated, devs are aware of that :good:
bad news: flashed to CARBON-KK-NIGHTLY-20141103-0939-peregrine and the BT-issue is back as in the beginning - com.andoird.bluetooth stops working - but only following the first connect -.-
interestingly going back to my pre-flash-backup didn't resolve the issue (doesn't matter if i just restore or wipe prior to that...but after flashing/restoring the first connect works perfectly)...perhaps that leads to some ideas about the cause?
was just trying to get it to work like the other time by stopping/deleting data of com.andoird.bluetooth, but didn't work this time
ok, figured it out again, this time i'll post my steps in case anyone ever encounters similar issues (and for my future reference in case i encounter them again, too )
1) unpair
2)switch off bluetooth
3) stop com.android.bluetooth in "apps"
4) delete data of com.android.bluetooth
5) reboot
6) pair
7) unpair
8) delete data of com.android.bluetooth
9) pair
10) reboot
at least these are the steps i did and it seems to be working now, again
Q&A for [ROM][4.4.4] OmniROM - Stingray/Stingray_CDMA - bigPart
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4] OmniROM - Stingray/Stingray_CDMA - bigPart. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
no sound, no auto-rotate
I am fairly new to Rooting and updating my Xoom to the newest Kitkat system. I am having 2 issues as of right now. The sound has never worked no matter what the settings say, and initially the auto-rotate was functioning and suddenly it stopped.
I have checked all options/setting and see nothing that should explain either of these 2 issues. I also didnt add any new apps in the time from initial update to the auto-rotate not working so if anyone has any suggestions or ideas, it would be greatly appreciated.
Again I am fairly new to all this, so the simpler or more detailed the potential solution the more likely I will understand it.
Thanks.
No sound on Omni 4.4 cmda version
I love the rom, only problem is I have no sound on the cmda version. I read the comments and saw people suggest install the top rom version over the bottom and then reflashing gapps. Should have sound. When I do this tablet boots but keeps giving me error "Unfortunately, the process com.android.phone has stopped" I say ok but it keeps coming up and wont let me get any further. Any suggestions?
volume issue
Anyone know how to fix the no sound issue in omni rom 4.4.4 stingray cdma? I cant get any sound at all. Help would be appreciated.
Took a couple go's but now up and running 4.4.2!
Thank you!
First time I've moved from the standard stock implementation, never even rooted the device before, but a couple attempts and following your instructions I managed to install BigPart, Flash omni-4.4.2-201XXXXX-everest-HOMEMADE_XXXX.zip, gapps-xxxx.zip & UPDATE-SuperSU-v1.86.zip.
I was about to give up on the Xoom and buy something newer, Tab S or something, but this appears to have put new life back into the old Xoom!
Followed the instructions above, but could not get it to clear Dalvik, failed every time. In the end I bit the bullet and formatted the internal drive, then flashed again - worked like a charm - figured since I was going to pass it over for a new one or this was going to work I had little to lose. As it happens I now seem to have it back & working well.
Now have bunch of apps back installed and trying them all out, so far most appear to be fine; though Google maps crashes whenever I zoom in too far.... less than a country level, I don't mean excessively far - thoughts?
Blackdogn3 said:
Now have bunch of apps back installed and trying them all out, so far most appear to be fine; though Google maps crashes whenever I zoom in too far.... less than a country level, I don't mean excessively far - thoughts?
Click to expand...
Click to collapse
Google Maps v9+ has problems on the Xoom with all the different custom ROMS (Omni, CWM, EOS, etc). You need to downgrade to Maps v8.4.1 to get it to work.
slow1234 said:
Google Maps v9+ has problems on the Xoom with all the different custom ROMS (Omni, CWM, EOS, etc). You need to downgrade to Maps v8.4.1 to get it to work.
Click to expand...
Click to collapse
Thanks as said a newbie! Downgraded and working fine - thanks for quick reply
Blackdogn3 said:
Thanks as said a newbie! Downgraded and working fine - thanks for quick reply
Click to expand...
Click to collapse
It has also been noted that 9.2.0 is rolling out and that it works on the Xoom. I updated yesterday and did a quick check - it does appear to work fine!
No Sound
After I flashed "[ROM][4.4.4] OmniROM - Stingray/Stingray_CDMA - bigPart." onto my Verizon Motorola Xoom 4G Tablet,
I have no sound at all and also the auto-rotate feature does not work (stays locked in portrait mode until reboot).
A number of other forum members have posted the same problem. Can we get a solution from someone on the forum?
have all but twrp v 2.6.3 big part
I have every thing I need except big part v2.6.3, none of the links I've found work? Does it have to be v2.6..3. ? There seem to be updated versions?
No 3g or 1x fallback
Install this today, everything went ok, execpt i could not get verizon 3g or 1x service. 4g works fine, when i have coverage. SBF back to stock again i guess.
e:unable to mount '/cache
The process for flashing the xoom (stingray model) seems somewhat straightforward. Yet I can't seem to get a working flash from the effort. Two problems:
1) during the "wipe this and that" stage while running in recovery, I get "FAILED" for each of the requisite areas to wipe, along with other messages such as that in the title. while i find a handful of other posts within this forum from folks experiencing the same problem, i find nothing in response with useful suggestions to fix what's apparently broken;
2) the tablet boots up to the OMNI splash-screen, and that's it.
I've repeated the steps at the head of this thread umpteen-zillion times. But the result is the same after each attempt. Either some critical step (or two) is/are missing from the initial (and horribly written) description, or I have the most stubborn tablet built.
i haven't bricked the thing... i can access it via adb, and i can get into recovery with no issues. what i can't seem to do is:
1) find a TWRP download using the links provided that doesn't trip quarantine due to virus detection; or,
2) find a coherent set of instructions that correctly describe the logical flow of the process of flashing a ROM on a Xoom.
Suggestions?
CDMA Voice and data programming
Hi,
Thanks for your effort and excellent work but I need some help, The main thing i want to try, is to get back my CDMA signal because since i tried the stock rom 4.1.2 i was not able to get any Data working there, my xoom is a just CDMA with no sim or LTE upgrade and i already tried 2 basebands on it the one with the last version of the stock room and the one that gets installed with the IMML update but no luck, if by any chance you have the first baseband it would be great i guess its something like 2.00.
Another question that I have is related to BP tools or programming the Cdma xoom, every time I try to start in bp tools I was not able to see the utility, just today i tried to connect to my PC and its not able to connect to CDMA Workshop or QPST, is there a way to do that? i need to activate something? any idea would be great!
And would be great if you have any MZ600 SBF where has included the first baseband 2.00 'cause probably it will help me to recover my 3g data (it's the only thing i didn't find and try).
Thanks!!!
is this have a default calling future like any mobile?
Thank You to OmniRom for xoom devolopers (all of you)
I just wanted to post a thank you to all of the developers of the omnirom for xoom. I was able to install it tonight, with a couple soft brick scares, but it is up and ruining. I love my xoom and am very appreciative.
Thanks....Steve
Xoom OnmiROM freezes
I've got a similar problem to the problem outlined in this post. My son also has seen it on his Xoom.
When it becomes unresponsive (either on the dock or not), the only way I can recover is to hold the volume up and the power button until the tablet reboots. To me, it appears it goes into a deep sleep that the power button alone can't wake it up from.
There seems to be no set time period that the tablet has to be up before it hangs. Sometimes I can set it down for an hour and other times it's still responsive the next day.
semi-anonymous said:
I've got a similar problem to the problem outlined in this post. My son also has seen it on his Xoom.
When it becomes unresponsive (either on the dock or not), the only way I can recover is to hold the volume up and the power button until the tablet reboots. To me, it appears it goes into a deep sleep that the power button alone can't wake it up from.
There seems to be no set time period that the tablet has to be up before it hangs. Sometimes I can set it down for an hour and other times it's still responsive the next day.
Click to expand...
Click to collapse
It's not real common for this to happen, but this same issue does occasionally happen on the CyanogenMod 11 Rom also. Other than this, and the workarounds to do a few other things in Android 4.4.4, the Xoom has been a real God send that is just amazing.
Non-Functioning Sensors post-flash w/Omni Stingray
Finished flashing XOOM 4G with (in order listed):
Xoom-Universal-Root
R.A.H._TWRPv2.6.3
omni-4.4.4-20141130-1816+0100-stingray_cdma-HOMEMADE
pa_gapps-modular-pico-4.4.4-20150215-signed
UPDATE-SuperSU-v2.45
After I noticed that the auto-rotate didn't work, I downloaded "My Android Sensors" from the Play Store. It shows the NO sensor is working. What gives..?
Looking for file EOS-Stingray-imm76l-radios-update.zip
Hi all,
Can someone help with the file ?
EOS-Stingray-imm76l-radios-update.zip
Thank you
The Rom works great.
I installed it month ago and it is working fine.
Batterylife is perfect and all things are working.
Thanks