Related
So I installed new ICS leak using I727UCALC4_OneClick and was running fine but all of a sudden lock screen stop working. I reset the phone and ran it again and phone now freezes up every 5 mins. How do I get back to 2.3.5 UCKJ2? I already tried using Odin and flashing stockrecovery.tar and no luck still stuck on ICS. I downloaded SGG-I727-UCKJ2-k0kane.7z and also SGH-I727UCKJ2_I727ATTKJ2.rar but when I go into dl mode computer can't recognize these two files or just can't find them. I need help please, thanks in advance.
Envy Diz said:
So I installed new ICS leak using I727UCALC4_OneClick and was running fine but all of a sudden lock screen stop working. I reset the phone and ran it again and phone now freezes up every 5 mins. How do I get back to 2.3.5 UCKJ2? I already tried using Odin and flashing stockrecovery.tar and no luck still stuck on ICS. I downloaded SGG-I727-UCKJ2-k0kane.7z and also SGH-I727UCKJ2_I727ATTKJ2.rar but when I go into dl mode computer can't recognize these two files or just can't find them. I need help please, thanks in advance.
Click to expand...
Click to collapse
You probably need to unzip the .7z and .rar file to use them. I believe Odin only "sees" .tar files.
Make sure you read the instructions carefully and know what you're doing.
Envy Diz said:
So I installed new ICS leak using I727UCALC4_OneClick and was running fine but all of a sudden lock screen stop working. I reset the phone and ran it again and phone now freezes up every 5 mins. How do I get back to 2.3.5 UCKJ2? I already tried using Odin and flashing stockrecovery.tar and no luck still stuck on ICS. I downloaded SGG-I727-UCKJ2-k0kane.7z and also SGH-I727UCKJ2_I727ATTKJ2.rar but when I go into dl mode computer can't recognize these two files or just can't find them. I need help please, thanks in advance.
Click to expand...
Click to collapse
K0nane's thread should work for you if you read and follow the directions.
SamMobile.com also has original Skyrocket firmware that flashes via Odin. The SamMobile version is a more complete install that is reported to not trip the counter and show as "original Samsung firmware". I havn't tried either version so you need to read for yourself before you ask any questions or try anything.
projeqht said:
You probably need to unzip the .7z and .rar file to use them. I believe Odin only "sees" .tar files.
Make sure you read the instructions carefully and know what you're doing.
Click to expand...
Click to collapse
Impossible to unzip because its a .7z and .rar file, computer won't let me I tried it already.
scott14719 said:
K0nane's thread should work for you if you read and follow the directions.
SamMobile.com also has original Skyrocket firmware that flashes via Odin. The SamMobile version is a more complete install that is reported to not trip the counter and show as "original Samsung firmware". I havn't tried either version so you need to read for yourself before you ask any questions or try anything.
Click to expand...
Click to collapse
It's not working Odin can't find files.
Envy Diz said:
It's not working Odin can't find files.
Click to expand...
Click to collapse
ODIN doesn't look for files. You need to tell them where there are by clicking on PDA and choosing the tar from wherever location you saved it.
dicksteele said:
ODIN doesn't look for files. You need to tell them where there are by clicking on PDA and choosing the tar from wherever location you saved it.
Click to expand...
Click to collapse
lol I know that but it's not there trust me.
Envy Diz said:
Impossible to unzip because its a .7z and .rar file, computer won't let me I tried it already.
Click to expand...
Click to collapse
I unzipped it, you have to or it won't do ****
Sent from SKYROCKET
NexusMod 4.0
Romracer 0.3
Envy Diz said:
lol I know that but it's not there trust me.
Click to expand...
Click to collapse
You need to unzip the files with an extractor. It has to be a .tar file to get Odin to see it. Plain and simple.
Envy Diz said:
Impossible to unzip because its a .7z and .rar file, computer won't let me I tried it already.
Click to expand...
Click to collapse
Yeah since its a .7z and .rar file, you'll need to download WinRar or 7zip to unzip them.
Winzip probably won't suffice. Good luck.
File was corrupted not sure why, now in dl mode I get error message that says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I'm dl another one now and will unzip to see if that works, I'm crossing my fingers. Thanks
It worked but baseband isn't UCKJ2 and I keep getting foreclose message that google services isn't working :/ baseband is I727UCALC4
Envy Diz said:
It worked but baseband isn't UCKJ2 and I keep getting foreclose message that google services isn't working :/ baseband is I727UCALC4
Click to expand...
Click to collapse
The knonane tar does not include radio
xcrazydx said:
The knonane tar does not include radio
Click to expand...
Click to collapse
Can't seem to find radio that is flashable through Odin, also noticed counter was set off.
Envy Diz said:
Can't seem to find radio that is flashable through Odin, also noticed counter was set off.
Click to expand...
Click to collapse
Yes, of course. Did you read about this before doing it? You can get the full tar with radio from sammobile and it wont set off the counter.
xcrazydx said:
Yes, of course. Did you read about this before doing it? You can get the full tar with radio from sammobile and it wont set off the counter.
Click to expand...
Click to collapse
This one I727UCKJ2_I727ATTKJ2_ATT.zip? Still doesn't have radios I'm looking for I tried that one first.
Envy Diz said:
This one I727UCKJ2_I727ATTKJ2_ATT.zip? Still doesn't have radios I'm looking for I tried that one first.
Click to expand...
Click to collapse
What radio do you want? thats stock att
Envy Diz said:
File was corrupted not sure why, now in dl mode I get error message that says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I'm dl another one now and will unzip to see if that works, I'm crossing my fingers. Thanks
Click to expand...
Click to collapse
Envy Diz said:
It worked but baseband isn't UCKJ2 and I keep getting foreclose message that google services isn't working :/ baseband is I727UCALC4
Click to expand...
Click to collapse
Envy Diz said:
Can't seem to find radio that is flashable through Odin, also noticed counter was set off.
Click to expand...
Click to collapse
I strongly suggest you completely stop what you are doing and actually do a little research and reading before you go any further. Every issue you have encountered has been identified many times and is always caused from people not taking the time to learn about what they are doing for they jump right in. YOU WILL END UP WITH A BRICKED PHONE IF YOU CONTINUE WITHOUT READING AND RESEARCHING!
The Kies message was brought up several times today in other threads relating to this ICS leak. You need to read all of the threads related to it.
I mentioned the counter in this very thread...if you would have read it. The baseband (radio) isn't flashed with K0nane's TAR or most other ROMS (unless otherwise stated). You have to go to the "Radio" thread in the DEV section and flash it through CWM seperately. It has been reported (by others) that the firmware at SamMobile WILL flash the correct modem and (I'll say it again) will not trigger the counter.
DO what you want, its your phone, but if you aren't going to take the time to learn about what you are doing you will be the owner of a bricked phone.
scott14719 said:
I strongly suggest you completely stop what you are doing and actually do a little research and reading before you go any further. Every issue you have encountered has been identified many times and is always caused from people not taking the time to learn about what they are doing for they jump right in. YOU WILL END UP WITHA BRICKED PHONE IF YOU CONTINUE WITHOUT READING AND RESEARCHING!
The Kies message was brought up several times today in other threads relating to this ICS leak. You need to read all of the threads related to it.
I mentioned the counter in this very thread...if you would have read it. The baseband (radio) isn't flashed with K0nane's TAR or most other ROMS (unless otherwise satated). You have to go to the "Radio" thread in the DEV section and flash it through CWM seperately. It has been reported (by others) that the firmware at SamMobile WILL flash the correct modem and (I'll say it again) will not trigger the counter.
DO what you want, its your phone, but if you aren't going to take the time to learn about what you are doing you will be the owner of a bricked phone.
Click to expand...
Click to collapse
Very good advice sir! I recommend this also, envy
scott14719 said:
I strongly suggest you completely stop what you are doing and actually do a little research and reading before you go any further. Every issue you have encountered has been identified many times and is always caused from people not taking the time to learn about what they are doing for they jump right in. YOU WILL END UP WITHA BRICKED PHONE IF YOU CONTINUE WITHOUT READING AND RESEARCHING!
The Kies message was brought up several times today in other threads relating to this ICS leak. You need to read all of the threads related to it.
I mentioned the counter in this very thread...if you would have read it. The baseband (radio) isn't flashed with K0nane's TAR or most other ROMS (unless otherwise satated). You have to go to the "Radio" thread in the DEV section and flash it through CWM seperately. It has been reported (by others) that the firmware at SamMobile WILL flash the correct modem and (I'll say it again) will not trigger the counter.
DO what you want, its your phone, but if you aren't going to take the time to learn about what you are doing you will be the owner of a bricked phone.
Click to expand...
Click to collapse
Did read but there's way to much lol ...see with S2 everything was packed in one file, easy flash through Odin and you were set...But thanks for the info.
Sent from my SAMSUNG-SGH-I727 using xda premium
hey guys i am new to the forums..i have t mobile galaxy s t959v. and its stuck on bootloop. i have tried ODIN to flash it back to stock firmware but it keeps reeboting on vibrant screen over nad over...help me guys...m going out of my mind. also i tried eugene froyo with no avail cnt get past a boot screen. But i can get into download mode. any help would be appreciated.....:good:
The Guide
Read Learn Profit.
Then thank the guy who spent hours(maybe even days) putting that together.
hechoen said:
The Guide
Read Learn Profit.
Then thank the guy who spent hours(maybe even days) putting that together.
Click to expand...
Click to collapse
i saw the guide earlier and it ddint work for me since i cant boot up the phone and update it with kies mini or anything else. any other solution? m going crazy.
What do you mean you can't boot up? You need to be on download mode, or are you telling me that you can't get into download mode?
If you can't get into download mode then you're out of luck.
nemeancestus said:
i saw the guide earlier and it ddint work for me since i cant boot up the phone and update it with kies mini or anything else. any other solution? m going crazy.
Click to expand...
Click to collapse
OK you said in your OP that you can get into DL mode. Follow the second post of that guide for getting Heimdall One-Click up and running. Then flash heimdall per the directions of the guide. You'll want to flash WITH bootloaders. Just relax and read through it. It will fix your problems.
Before you do anything, uninstall Kies Mini and use usbdeview to uninstall android and samsung drivers. Then proceed with Lumins guide. If you DO NOT UNINSTALL DRIVERS I can assure you there is no way to get out of hard brick unless you have a jig.
Tip: Uninstall drivers that has the name Samsung or Android.
th3controller said:
If you DO NOT UNINSTALL DRIVERS I can assure you there is no way to get out of hard brick unless you have a jig.
Click to expand...
Click to collapse
Actually not true. If you use a different USB port then the one the Kies drivers are linked to Heimdall Drivers will install just fine. I've got Odin, Heimdall, and ADB running for two different phones on my laptop. And this guy is soft bricked not hard bricked.
hechoen said:
Actually not true. If you use a different USB port then the one the Kies drivers are linked to Heimdall Drivers will install just fine. I've got Odin, Heimdall, and ADB running for two different phones on my laptop. And this guy is soft bricked not hard bricked.
Click to expand...
Click to collapse
i followed the second guide and got everything right..but when i click flash i get this error/message? ''Local and device PIT dont match and repartition wasnt specified!
Ending session....
Rebooting device....
what should i do???
nemeancestus said:
i followed the second guide and got everything right..but when i click flash i get this error/message? ''Local and device PIT dont match and repartition wasnt specified!
Ending session....
Rebooting device....
what should i do???
Click to expand...
Click to collapse
You sure you have a t959v? Try a different one click from the collection? New to me.
In his op it says it is bootlooping on the vibrant screen. Quite possibly he actually has a vibrant .
eollie said:
In his op it says it is bootlooping on the vibrant screen. Quite possibly he actually has a vibrant .
Click to expand...
Click to collapse
That's what I'm thinking. Or when he flashed with Odin he flashed vibrant firmware to it? Have you ever seen that error before?
Cant say that I have. It could be I havent ever flashed a rom not for this phone.
AdamOutler says one clicks have a safety that keeps you from flashing the wrong software. That might be what is happening. Maybe the op needs to use heimdall-frontend to flash a tar.gz. /shrug.
nemeancestus are you comfortable using regular heimdall? You can flash the files used in the one click with heimdall-frontend. I will link the tar.gz, download it. In heimdall-frontend the first tab will give you the ability to load a package. Browse to the folder you downloaded it in. It will decompress the tar.gz once that is done in the package files pane it will list the files. Once it does that select load it will take you to the flash tab and load the files for you. Now put your phone in download mode and it should show as connected in heimdall. Dont change any of the options set. Just hit flash. After that it should reboot and you will be on stock plus blastoff kernel. You will need to flash a different rom tho wifi does not work and it doesnt have busy box or su preinstalled. Just reboot to recovery and flash a new rom.
The link might not be active yet give it some time I just put it on drop box.
https://dl.dropbox.com/u/10373328/Stock KJ6 + root.tar.gz
hechoen said:
That's what I'm thinking. Or when he flashed with Odin he flashed vibrant firmware to it? Have you ever seen that error before?
Click to expand...
Click to collapse
I think you are right. He probably has the phone but flashed a vibrant rom. He refers to "Eugene's Froyo Rom"
Check the link and forum name.
--------------------------------------------------------------------------------
http://forum.xda-developers.com/showthread.php?t=819047
First off I searched, and have tried everything on forum before you say do a search
My kid bricked her Sidekick 4g
I tried to ODIN about 4 different Tars they all say they pass but it then boots into the Android recovery and says installing some. When i click reboot phone it turns phone .
Everytime i odin it reboots to a recovery. Is there any way I can get this phone to boot back to the original rom?
all the links I have either don't exist any more, or fail. Please advice
716Rob said:
First off I searched, and have tried everything on forum before you say do a search
My kid bricked her Sidekick 4g
I tried to ODIN about 4 different Tars they all say they pass but it then boots into the Android recovery and says installing some. When i click reboot phone it turns phone .
Everytime i odin it reboots to a recovery. Is there any way I can get this phone to boot back to the original rom?
all the links I have either don't exist any more, or fail. Please advice
Click to expand...
Click to collapse
You said you've tried everything -- without attacking you I don't exactly believe this. ODIN isn't the ONLY way to "ODIN" or restore to factory default.
Try this. It's easy to use, fast, and there's tons of support on it. Most people who have had problems like this have solved it with Adam's tool.
http://forum.xda-developers.com/showthread.php?t=1350060
Be sure to thank the OP in that thread if this helps you.
TheLastSidekick said:
You said you've tried everything -- without attacking you I don't exactly believe this. ODIN isn't the ONLY way to "ODIN" or restore to factory default.
Try this. It's easy to use, fast, and there's tons of support on it. Most people who have had problems like this have solved it with Adam's tool.
http://forum.xda-developers.com/showthread.php?t=1350060
Be sure to thank the OP in that thread if this helps you.
Click to expand...
Click to collapse
You can find the download for the link in that OP here:
http://forum.xda-developers.com/showthread.php?p=30763711#post30763711
It seems that Adam's server doesn't have that file anymore.
actually that was my first try however link was dead.. So You better believe me!!!! However the second link works so we shall see..
I actually googled that too and downloaded one but was asking me to download a gz file
I tried to root my phone and the program wouldnt recognize it
decided to restore my phone and now most of my apps are one and i cant text anymore
Can you give some more info? What method did you try and root with? What errors did you get? What do you mean you can't text anymore? Under settings for your messaging app do you have a number under the Message Center?
dr12volt1338 said:
Can you give some more info? What method did you try and root with? What errors did you get? What do you mean you can't text anymore? Under settings for your messaging app do you have a number under the Message Center?
Click to expand...
Click to collapse
tried to root using this method
http://forum.xda-developers.com/show....php?t=1762709
and it wouldnt recognize my device so i rooted using oden
it seemed to work but when i opened my apps list most of them were gone, i only had 1 page of apps
when i try to text it says "unfortunately, messaging has stopped"
it wont even let me open settings when i go into messages
bump
OK. when you used ODIN what .TAR file did you flash? the ROOT66 one? There are others there that eliminate most all of the bloatware from VZW. Also the link you posted isn't valid.....
dr12volt1338 said:
OK. when you used ODIN what .TAR file did you flash? the ROOT66 one? There are others there that eliminate most all of the bloatware from VZW. Also the link you posted isn't valid.....
Click to expand...
Click to collapse
yes
and my bad
http://forum.xda-developers.com/showthread.php?t=1762709
I just rooted one yesterday with that DebugFS and didn't have an issue one..... I am going to guess a bad download somewhere... Did you check MD5's? I would download the Samsung drivers again download the DebugFS again and verify that you follow it step by step.... and double check MD5 to make sure you are getting a good download.
dr12volt1338 said:
I just rooted one yesterday with that DebugFS and didn't have an issue one..... I am going to guess a bad download somewhere... Did you check MD5's? I would download the Samsung drivers again download the DebugFS again and verify that you follow it step by step.... and double check MD5 to make sure you are getting a good download.
Click to expand...
Click to collapse
aware me on MD5's
MD5's are the long series of numbers and letters that accompany most downloads... You can find free MD5 SUM checkers on the net for your computer depending on your OS... You copy the MD5 from the download site and compare it to the one that the program you get generates... They must match to show all the info stayed the same through the download....
I think you forgot to untick factory reset in odin ?
Sent from my SGH-T999 using xda premium
Please post questions in Q&A
Thread moved
Thanks
FNM
Hi,
I was trying to root and install a custom rom on a friends phone. She has T-Mobile Galaxy S 4G. I was rushing through the whole project cause I had work and accidentally installed T-Mobile Vibrant Stock 2.1 using Heimdall. It was my fault. I did a google search for SGH-T959, but failed to realize that SGH-t959U is Vibrant and SGH-T959V is Samsung Galaxy S 4G...
After flashing the wrong ROM, I could not get it back into Download mode. I removed the SIM, SD card, Battery, and then tried putting it back into download mode (without the SIM or SD card) and that worked. I was able to get it into download mode at that point, but it would still not turn on or boot into recovery.
After realizing it was the wrong Flash, I searched online and found this http://forum.xda-developers.com/showthread.php?t=1358498 , after searching for users who bricked their phone previously and this was listed as a solution... the phone doesn't boot now however. It loads into Samsung Recovery (3e) and gives the error:
--Applying Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/TMB/system/'
Successfully applied multi-CSC
Each time i try to 'reboot system now' it just loops back to recovery with the same error. On that link i listed above, it says to install bootloaders if that CSC issue exists. Problem is, each time i try, it says PIT failed and then it just disconnects and wont reboot, requiring me to reflash the package all-together.
This phone was originally on 2.3.6 and the problem is I tried rooting using Vibrant instructions which was to go back to 2.1, then flash root, then CWM, then custom ROM.
How do i get this phone working again. I can pick up where i left off as far as rooting and installing a custom ROM. I have experience with it... But I have no idea how to get this phone out of this soft-brick. Can anyone please assist me. I feel terrible for messing up my friends phone.
Thanks a bunch!
TL;DR - Soft bricked SGS4G by flashing Vibrant ROM, tried to correct using SuperOneClick heimdall, doesnt work. please help. Originally was completely stock.
Read the second link in my signature and see if it helps you with Heimdal.
lumin30 said:
Read the second link in my signature and see if it helps you with Heimdal.
Click to expand...
Click to collapse
Yeah, I've read that when I was searching for a fix on my lunch break. My laptop is a MAC however. Which is why I didn't ODIN. I lost my Windows partition a while ago, along with my Windows CD.... Is there anyway I can get some MAC instructions?
JGonzo1299 said:
Yeah, I've read that when I was searching for a fix on my lunch break. My laptop is a MAC however. Which is why I didn't ODIN. I lost my Windows partition a while ago, along with my Windows CD.... Is there anyway I can get some MAC instructions?
Click to expand...
Click to collapse
Get heimdall 1.3.1 for mac os x here. There is 1.3.2 and 1.4.0-rc1, but don't use them, just use 1.3.1 for now!
Read the install instructions here.
After that, you should be able to do the oneclick on your mac.
Just replying to the OP... Still follow the instructions in my previous post.
JGonzo1299 said:
the phone doesn't boot now however. It loads into Samsung Recovery (3e) and gives the error:
--Applying Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/TMB/system/'
Successfully applied multi-CSC
Each time i try to 'reboot system now' it just loops back to recovery with the same error. On that link i listed above, it says to install bootloaders if that CSC issue exists. Problem is, each time i try, it says PIT failed and then it just disconnects and wont reboot, requiring me to reflash the package all-together.
Click to expand...
Click to collapse
The CSC error is just a red herring. Don't worry about that error. The one to worry about is not being able to flash the PIT!
JGonzo1299 said:
This phone was originally on 2.3.6 and the problem is I tried rooting using Vibrant instructions which was to go back to 2.1, then flash root, then CWM, then custom ROM.
Click to expand...
Click to collapse
Yea... Don't do that. Follow only instructions for the SGH-T959V, Galaxy S 4G. Do not ever, EVER, follow instructions for any other phone, unless you know exactly what you are doing.
JGonzo1299 said:
How do i get this phone working again. I can pick up where i left off as far as rooting and installing a custom ROM. I have experience with it... But I have no idea how to get this phone out of this soft-brick. Can anyone please assist me. I feel terrible for messing up my friends phone.
Thanks a bunch!
TL;DR - Soft bricked SGS4G by flashing Vibrant ROM, tried to correct using SuperOneClick heimdall, doesnt work. please help. Originally was completely stock.
Click to expand...
Click to collapse
Make sure you only follow instructions for the SGH-T959V, Galaxy S 4G! As I said above.
Either follow the instructions in my oneclick sticky thread, or follow lumin30's guide.
Make sure you try different usb cables. Make sure the ports on the computer and phone are clear of obstructions. Check in the cable connectors too. If all that still doesn't work, try a different computer. You could have bad usb ports. This has happened to me before, but it was a double whammy. I had bad usb ports on my computer and a bad usb cable.
bhundven said:
Get heimdall 1.3.1 for mac os x here. There is 1.3.2 and 1.4.0-rc1, but don't use them, just use 1.3.1 for now!
Read the install instructions here.
After that, you should be able to do the oneclick on your mac.
Click to expand...
Click to collapse
With that in mind, does anyone have a link to the most up to date Stock ROM not rooted. The Sticky Page has a dead link and the workaround link takes me to the OneClick ROM install that gave me the problem to begin with. I'd rather use the instructions to flash it myself and choose the file instead of doing the OneClick option. Does that make sense?
bhundven said:
Just replying to the OP... Still follow the instructions in my previous post.
The CSC error is just a red herring. Don't worry about that error. The one to worry about is not being able to flash the PIT!
Yea... Don't do that. Follow only instructions for the SGH-T959V, Galaxy S 4G. Do not ever, EVER, follow instructions for any other phone, unless you know exactly what you are doing.
Make sure you only follow instructions for the SGH-T959V, Galaxy S 4G! As I said above.
Either follow the instructions in my oneclick sticky thread, or follow lumin30's guide.
Make sure you try different usb cables. Make sure the ports on the computer and phone are clear of obstructions. Check in the cable connectors too. If all that still doesn't work, try a different computer. You could have bad usb ports. This has happened to me before, but it was a double whammy. I had bad usb ports on my computer and a bad usb cable.
Click to expand...
Click to collapse
Yeah i followed Vibrant instructions on accident. It was a careless mistake. Ill ignore the CSC error then and Ill try using a different USB port. My usb cable is brand new from my SIII. I don't think its a problem. But my mac USB ports are pretty old.
JGonzo1299 said:
With that in mind, does anyone have a link to the most up to date Stock ROM not rooted. The Sticky Page has a dead link and the workaround link takes me to the OneClick ROM install that gave me the problem to begin with. I'd rather use the instructions to flash it myself and choose the file instead of doing the OneClick option. Does that make sense?
Click to expand...
Click to collapse
Uhm, In the very first post of this thread, is this link. This is the totally back to stock oneclick.
I just downloaded it. Link works fine.
Yes, I realize you'd like to just run "heimdall" to flash everything, but it is so error prone.
The oneclick works for me on mac, linux, and windows. Again, if you have problems, list out each step you made and the results and we'll help
Just open a terminal, type:
Code:
java -jar T959VUVKJ6_STOCK-UVKJ6-One-Click.jar
and go...
bhundven said:
Uhm, In the very first post of this thread, is this link. This is the totally back to stock oneclick.
I just downloaded it. Link works fine.
Yes, I realize you'd like to just run "heimdall" to flash everything, but it is so error prone.
The oneclick works for me on mac, linux, and windows. Again, if you have problems, list out each step you made and the results and we'll help
Just open a terminal, type:
Code:
java -jar T959VUVKJ6_STOCK-UVKJ6-One-Click.jar
and go...
Click to expand...
Click to collapse
OK. I followed this. It DIDNT work. Ill list the steps i did.:
1) Redownloaded the one click listed above to ensure its not a corrupted download and verified
2)Placed file in my user folder (MAC Terminal defaults to this folder which is why i chose it)
3) Checked my Java version using Software update on MAC. Java was already up to date.
4)Opened Terminal
5) typed ls to confirm i was in the correct directory.
6) typed 'java -jar T959VUVKJ6_STOCK-UVKJ6-One-Click.jar'
7) Terminal began doing its thing.
8) I already have the Samsung Drivers. I've had Samsung Facinate and i currently have SIII so thats all up to date. Once i verified, i skipped the samsung drivers step.
9)I skipped the x86 step cause i know MAC has its own version of it already installed. My MAC version is 10.6.8
10) Connected phone to USB port, put in download mode.
11) Waited til phone was recognized with OneClick AND my MAC,
12) Ready to Flash
13) Clicked Flash
14) Flash successful, phone automatically powers down, reboots
15) Phone automatically loads into Android Recovery (3e) and gives error CSC mumbo jumbo i quoted in my first post
16) I needed bootloaders since I accidentally put Vibrant ROM. (per instructions from http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2 )
17) Removed Battery, Reconnected to MAC and placed in Download Mode
18) Clicked Flash Bootloaders, bypassed the warning, clicked Flash.
19) Uploading PIT, PIT upload failed!, Ending Session..., Rebooting Device...
20) Phone shuts off and never reboots, stays as a black screen, cant turn it on, load into recovery. I can ONLY load it into Download mode.
I followed these instructions as directed http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2 . Tried different USB cables and also tried BOTH USB ports. Please help. Thanks in advance.
JGonzo1299 said:
OK. I followed this. It DIDNT work. Ill list the steps i did.:
1) Redownloaded the one click listed above to ensure its not a corrupted download and verified
2)Placed file in my user folder (MAC Terminal defaults to this folder which is why i chose it)
3) Checked my Java version using Software update on MAC. Java was already up to date.
4)Opened Terminal
5) typed ls to confirm i was in the correct directory.
6) typed 'java -jar T959VUVKJ6_STOCK-UVKJ6-One-Click.jar'
7) Terminal began doing its thing.
8) I already have the Samsung Drivers. I've had Samsung Facinate and i currently have SIII so thats all up to date. Once i verified, i skipped the samsung drivers step.
9)I skipped the x86 step cause i know MAC has its own version of it already installed. My MAC version is 10.6.8
10) Connected phone to USB port, put in download mode.
11) Waited til phone was recognized with OneClick AND my MAC,
12) Ready to Flash
13) Clicked Flash
14) Flash successful, phone automatically powers down, reboots
15) Phone automatically loads into Android Recovery (3e) and gives error CSC mumbo jumbo i quoted in my first post
16) I needed bootloaders since I accidentally put Vibrant ROM. (per instructions from http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2 )
17) Removed Battery, Reconnected to MAC and placed in Download Mode
18) Clicked Flash Bootloaders, bypassed the warning, clicked Flash.
19) Uploading PIT, PIT upload failed!, Ending Session..., Rebooting Device...
20) Phone shuts off and never reboots, stays as a black screen, cant turn it on, load into recovery. I can ONLY load it into Download mode.
I followed these instructions as directed http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2 . Tried different USB cables and also tried BOTH USB ports. Please help. Thanks in advance.
Click to expand...
Click to collapse
Just double checking, This is t959v, not t959w... right? T959W has some issues with heimdall and odin that are still being worked out.
When i originally encountered the problem. I downloaded the 'back to Factory stock rom' for vibrant. It was an ODIN file so it was .tar, I downloaded its associated PIT file.
I loaded the PIT file into heimdall under the 'flash' tab
i extracted the .tar file and found 6 files. i took each file and loaded them individually to heimdall 1.3.1 under the 'flash' tab.
I had 6 files in there: cache, dbdata, factoryfs, modem, param, zImage.
Once I flashed those it wouldnt boot and was just black. could only go into download mode.
Then I realized i messed up and used the wrong ROM.
Came into this thread for SGS4G
Found the right files.
Phones been broken since and ive been following the instructions listed above. hope that makes sense. im at my work desk. sorry. Ill try to find the link of the go back to factory stock file i found on the vibrant forums but it was whatever vibrant came with out of the box. and it was a verified stock ROM. I just followed the instructions to the T until I encountered problems.....
bhundven said:
Just double checking, This is t959v, not t959w... right? T959W has some issues with heimdall and odin that are still being worked out.
Click to expand...
Click to collapse
Yes. I popped the battery out and im looking at the label in the back of the phone and it says SGH-959V.
JGonzo1299 said:
Yes. I popped the battery out and im looking at the label in the back of the phone and it says SGH-959V.
Click to expand...
Click to collapse
Ok, so it sounds like you need to try a different computer.
I know this is a pita, and I'm not trying to make things more difficult then they are, but as I said before. I've had this issue and had to buy a new computer. :crying:
Just thinking aloud, could try the kc1/kd1(froyo) firmware? Then move to gingerbread.
bhundven said:
Ok, so it sounds like you need to try a different computer.
I know this is a pita, and I'm not trying to make things more difficult then they are, but as I said before. I've had this issue and had to buy a new computer. :crying:
Click to expand...
Click to collapse
I'm going to try my friends PC. I'll try ODIN if I can find ODIN files, if not ill try heimdall instructions on a PC.
champ1919 said:
Just thinking aloud, could try the kc1/kd1(froyo) firmware? Then move to gingerbread.
Click to expand...
Click to collapse
Where do I find these? Can you post the link? I can probably try to flash this while im still at work for the next 2 hours lol
JGonzo1299 said:
I'm going to try my friends PC. I'll try ODIN if I can find ODIN files, if not ill try heimdall instructions on a PC.
Where do I find these? Can you post the link? I can probably try to flash this while im still at work for the next 2 hours lol
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=27374477
I think it's still a good link in that thread... I'm on my phone, I did try and something started.
JGonzo1299 said:
I had 6 files in there: cache, dbdata, factoryfs, modem, param, zImage.
Click to expand...
Click to collapse
So out of curiosity I just unpacked this Ravers KJ6 for Odin which was harder to find than I thought because Raver likes to spell offical instead of official. But I digress. The kicker here is that there are only 5 files.
cache.rfs
factoryfs.rfs
modem.bin
Sbl.bin
zImage
If I where the OP I'd DL that then unpack it. Reverse engineer what you did the first time by using the proper .tar through heimdall. If it worked once to totally hose you it just might work again to save you. Or it might not. Either way it's worth a shot. Good luck man.
hechoen said:
So out of curiosity I just unpacked this Ravers KJ6 for Odin which was harder to find than I thought because Raver likes to spell offical instead of official. But I digress. The kicker here is that there are only 5 files.
cache.rfs
factoryfs.rfs
modem.bin
Sbl.bin
zImage
If I where the OP I'd DL that then unpack it. Reverse engineer what you did the first time by using the proper .tar through heimdall. If it worked once to totally hose you it just might work again to save you. Or it might not. Either way it's worth a shot. Good luck man.
Click to expand...
Click to collapse
So you mean Download this and do exactly what I did that bricked the phone in the first place. but use these files instead. Cause these are for SGS4G. Correct?
I'll try that now. But dbdata is missing. Is that an issue? What is dbdata for anyway?
champ1919 said:
http://forum.xda-developers.com/showthread.php?p=27374477
I think it's still a good link in that thread... I'm on my phone, I did try and something started.
Click to expand...
Click to collapse
Thank you. I'm going to try this after I try what i just posted above first. Will post results later tonight around 11 EST. Work computer wont let me download any links.
JGonzo1299 said:
So you mean Download this and do exactly what I did that bricked the phone in the first place. but use these files instead. Cause these are for SGS4G. Correct?
I'll try that now. But dbdata is missing. Is that an issue? What is dbdata for anyway?
Click to expand...
Click to collapse
Yes that is what I mean.
I don't own a vibrant so I have know idea what dbdata is for. Maybe someone will chime in with a better answer. Doing it this way you should be able to get the phone back to where it was. Again this is my best guess at how to try to fix it. Plus it's really hard to brick a brick(bad joke I know but i had too).