Related
As the title says, here's the Rom.zip extracted from RUU_Hero_C_Sprint_2.31.651.7_signed_release.exe for those that don't use Windows, or prefer to have their RUU in zip format.
This will flash your phone to 2.31.651.7 STOCK.
http://www.mediafire.com/?m6x4sr682ruk027
Simply rename this to HERCIMG.zip and place on the root of your SDCard.
Power your phone completely off.
Press and Hold VOL DOWN and POWER until your phone boots into HBoot mode.
Wait for it to verify the zip, then click <ACTION> (Trackball) to update, or <SEND> (Green Call) to cancel.
Enjoy!
Here's my guide to rooting .7:
http://forum.xda-developers.com/showthread.php?t=804296
Personally..I want to say THANK YOU, THANK YOU, THANK YOU.
I have spent the last four hours searching for this. This needs to be stickied. I'm bookmarking it for sure. This got my phone unbricked..I thought all hope was lost and I would have to call in for warranty support (I got mine refurbed through Sprint last October..so I don't even know if I would still have any warranty support), and see if I could try my luck and getting it replaced, since that is what others have said to do as apparently this file from OP, did not exist.
And so for future reference, so that others don't go mindlessly searching through the forums.
If you
a.) Managed to overwrite your Recovery some how or completely delete it. (I did..and from searching this and many other forums over the past couple hours..I can see I wasn't the only one), and also have no boot (or a corrupted boot loop)
b.) Still have S-ON (You can find this out by powering off your phone and then pressing and holding the power button and the lower volume button), I recommend you turn S-Off for future reference if you're going to be dealing with customer ROMs a lot (so you don't have to go through the hell I just did..). See here..
http://forum.xda-developers.com/showthread.php?t=759955
c.) Have an updated Hboot (1.47) (you can also find this info. in part b.)
....then you KNOW that you are stuck. Because you
a.) Cannot flash a ROM in Recovery because you cannot access it.
b.) You cannot access ADB because your phone won't go that far and will only go into fastboot..
c.) But even though you have access to fastboot you can't do ANYTHING like flash a recovery image or a ROM..or anything for that matter..because S is still ON. (this is the "not allow" messages you will see pop up.)
d.) You have bootloader 1.47 so if you for example, were like me couldn't use this file here.. (http://forum.xda-developers.com/showthread.php?t=657086), because it would say there was a newer version and wouldn't install it.
So this file right here..was the only thing getting my phone back to a usable state. And considering that my searches have shown to pretty much give up all hope and have it sent it for warranty repair, then I think this thread deserves a bump for all those that have screwed up.
Yeah..I have to start ALL OVER now from a stock ROM (thank god for nandroid), but at least my phone isn't a dead brick.
Just thought this needed a well deserved bump.
I wonder if there is a RUU for the latest .2?
Wanted to say BIG THANKS. This worked like a charm to update prl/profile. Keeping two copies of this one on the sd and on the laptop. Thanks again.
Yea it's me Again. With the
Modified .HERO.
laie1472 said:
Wanted to say BIG THANKS. This worked like a charm to update prl/profile. Keeping two copies of this one on the sd and on the laptop. Thanks again.
Yea it's me Again. With the
Modified .HERO.
Click to expand...
Click to collapse
Forgive me for seeming NOOBish... but I can use this to do the same, then restore Nandroid back and it will keep the PRL/Profile update?
Just wondering... lolz, thanks!
Yup But you will have to reroot. This takes root from you. You will have to reroot with the Hero rooter from Reg or Z4 or one click root. But read read read. And as far as the prl/profile yup it will stick. When your phone boots up after running this just go into settings and updates and choose update profile and update prl don't update firmware. I repeat don't update firmware. After that just reboot and check your prl should be 60675. After that reroot, then flash a recovery and then nand restore. Hope this helps good luck
Remember this returns you to stock you will loose root and recovery..
Yea it's me Again. With the
Modified .HERO.
Why don't you guys just flash NFX's or LS's already rooted and way faster stock sense ROM to update PRL, etc?
Running stock ROM has to be one of the worst things ever after being on custom ROMs for so long.
I tried flashing almost ever sense rom on here pmgrands port, ninfintes stock odex and deodex and his apps 2 sd builds he has like 4 or 6 different builds. Tried flashing liquids builds beta and stable. All gave me a error. So I had to use this. I couldn't flash any sense rom
and it was easier to use this than try to figure out y. If he can flash a sense rom then yea that's the easier way but if not this is a for sure way to get back to stock.
Yea it's me Again. With the
Modified .HERO.
laie1472 said:
I tried flashing almost ever sense rom on here pmgrands port, ninfintes stock odex and deodex and his apps 2 sd builds he has like 4 or 6 different builds. Tried flashing liquids builds beta and stable. All gave me a error. So I had to use this. I couldn't flash any sense rom
and it was easier to use this than try to figure out y. If he can flash a sense rom then yea that's the easier way but if not this is a for sure way to get back to stock.
Yea it's me Again. With the
Modified .HERO.
Click to expand...
Click to collapse
I still have my original nandroid from before I flashed any ROMs and it takes me back to stock Sprint, where I do my updating. Is this faster than that?
jckeyser said:
I still have my original nandroid from before I flashed any ROMs and it takes me back to stock Sprint, where I do my updating. Is this faster than that?
Click to expand...
Click to collapse
Yup. That's way better and faster. Just go into settings / updates. Then just update prl and profile. Don't update firmware. After you confirm that your updated just nand restore and you should be good.
Edit not sure if you would have to reroot.
Yea it's me Again. With the
Modified .HERO.
Thanks for the reply's all... I like Sense and have NFX rom on my Hero, loaded a few ROMS but they won't update, so no worries, when I have some free time I'll sit and do it then. I don't like the one click rooters nor the clockwork recovery, I guess I'm old school and do it the hard way, lol, but thanks for letting me know it'll work (prl update) and stay on the handset!
Regards!
Without opening a huge can of worms I would like to know whats the best newest rom out there with sense I just searched for like 3 hours and lot of threads are old and I want what ever is new with sense also would like to upgrade to 2.2 im on Honeybun v.-2 lite firmware 2.1 update1
Gelladuga69 said:
Why don't you guys just flash NFX's or LS's already rooted and way faster stock sense ROM to update PRL, etc?
Running stock ROM has to be one of the worst things ever after being on custom ROMs for so long.
Click to expand...
Click to collapse
you got a link ? Im searching now
laie1472 said:
Yup. That's way better and faster. Just go into settings / updates. Then just update prl and profile. Don't update firmware. After you confirm that your updated just nand restore and you should be good.
Edit not sure if you would have to reroot.
Yea it's me Again. With the
Modified .HERO.
Click to expand...
Click to collapse
No need to reroot because it was a nandroid. Can't make a nandroid if you're not rooted.
Sent from my HTC Hero CDMA running Android 2.3
Does anybody have the original MD5 checksum for this file? I wanna make sure this file downloaded properly. Thanks in advance!
EDIT: efa439da700b5fad7ea49915ef7d2866
Sent from my HTC Hero CDMA running Android 2.3
does this work with any version of HBOOT? The phone I am dealing with has stock 1.5
mrtimo said:
does this work with any version of HBOOT? The phone I am dealing with has stock 1.5
Click to expand...
Click to collapse
What? Is your phone even rooted? Sprint upgraded to 2.1 a LONG time ago, the update is available at www.htc.com
It worked for me a while ago, but my dad just got a new hero so I tried using this, and it wouldn't recognize the image file.. any thoughts?
systemshock869 said:
It worked for me a while ago, but my dad just got a new hero so I tried using this, and it wouldn't recognize the image file.. any thoughts?
Click to expand...
Click to collapse
yeah, this only works if he has an S-off bootloader, which he doesn't have if it's a new hero.
il Duce said:
yeah, this only works if he has an S-off bootloader, which he doesn't have if it's a new hero.
Click to expand...
Click to collapse
According to the OP this one was extracted from the RUU, so it *should* work S-ON.
Okay first off, i know this is the wrong section. I can not post in development because I am new here, but I am in need of help desperately. Okay so I am rooted on 1.85 and the bootloader is NOT unlocked. Well i decided today to take the update to 4.0.4 before I did research. (Stupid me eh?) Well I start the OTA and then do some research. I learn that the update to 4.0.4 might be harmful to rooted users. So I disconnect from WiFi knowing it will pause the download. Well now I have a download that is just paused in the notification bar, and any time i connect to wifi it will continue the download. While the download is paused, can i unroot and take the update safely? I have seriously been searching for hours on end to find someone with a situation that I am in and i can not.
If you do a factory reset the update will go away. But that would also make you loose root. You should unlock the bootloader, then flash the rooted 2.20 update from the dev section.
Sent from my HTC One XL using xda app-developers app
Yep, get that bootloader unlocked immediately and flash a rooted stock ROM or a custom ROM. Make sure you backup all your stuff with Titanium because the bootloader unlock will wipe your phone.
Also, just so you know, this thread most definitely did NOT belong in development, which is reserved for ROMs and kernels and root guides and the like ONLY. Threads like this belong in Q+A but nobody is gonna kill you for posting it in General.
After the download, you should get a prompt to either Install, Postpone, or you can press the "back" capacitive button to cancel. Cancel should stop the update notifications. At least this is how its worked on past HTC OTAs. I personally can't verify, as I haven't gotten the notification yet. But others seem to verify this: http://forum.xda-developers.com/showthread.php?t=1817429
But if you want to be safe, you should SuperCID and unlock bootloader first, as others have suggested. Pressing the wrong button for the method I suggested above will be catastrophic otherwise (lose the ability to root and unlock BL).
Thanks for your help guys!
I just did a factory data reset on my phone. Honestly, I've gotten myself into trouble with rooting. I really need to read up before i continue with things of this sort. So since i did a factory data reset, am i 100% unrooted? Will i be safe to take the OTA now? Thanks for your help guys!
If you were stock 1.85, and rooted using the one-click or "manual" method (which you must be, if you you are still BL locked), then you are now unrooted. You are either rooted or not, there is no "percentage" of rooted.
What kind of trouble have you gotten into rooting, and what do you typically use root for?
I've been debating on whether or not to just go ahead and install the OTA to 2.2. The only thing I've used for root was for WiFi-Tether and I don't even use that anymore so I think I don't even necessarily NEED root anymore. I'm just tired of the updater telling me there's a new update to install - frankly very annoying. I've been just using the back capacitive button to cancel it. BUT, the last time I did this when 1.73 went to 1.85, I was just stock rooted, no unlocked BL (just like I am now), when I tried to install the OTA, went to that error with the triangle and exclamation point and wouldn't let me install it. I had to reflash to stock RUU because it was giving me a bootloop. I just don't want that to happen again... What does that triangle and exclamation point even really mean? I can't find a definitive answer on it. Shouldn't the OTA just install as normal, but it'll remove root in the process?
extol1337 said:
BUT, the last time I did this when 1.73 went to 1.85, I was just stock rooted, no unlocked BL (just like I am now), when I tried to install the OTA, went to that error with the triangle and exclamation point and wouldn't let me install it. I had to reflash to stock RUU because it was giving me a bootloop. I just don't want that to happen again... What does that triangle and exclamation point even really mean? I can't find a definitive answer on it. Shouldn't the OTA just install as normal, but it'll remove root in the process?
Click to expand...
Click to collapse
Red triangle and exclamation point is the stock recovery. This appears if something about the ROM is missing or corrupted. Not sure why this happened to you in that particular case. But installing OTAs on rooted phones is always a crap shoot. Sometimes it works, and you just lose root. Sometimes you boot loop or other things.
redpoint73 said:
Red triangle and exclamation point is the stock recovery. This appears if something about the ROM is missing or corrupted. Not sure why this happened to you in that particular case. But installing OTAs on rooted phones is always a crap shoot. Sometimes it works, and you just lose root. Sometimes you boot loop or other things.
Click to expand...
Click to collapse
That's what I was afraid of. Actually, I remember trying to install the 2.2 OTA a few days ago as well. Same red triangle and exclamation point. This time wasn't a boot loop and I just rebooted again and ever since, just kept canceling the update. Not sure what's going on...
extol1337 said:
That's what I was afraid of. Actually, I remember trying to install the 2.2 OTA a few days ago as well. Same red triangle and exclamation point. This time wasn't a boot loop and I just rebooted again and ever since, just kept canceling the update. Not sure what's going on...
Click to expand...
Click to collapse
Is the update actually downloaded to your phone? You may need to locate and delete it.
It may be trying to install the OTA from recovery, which makes sense. Don't actually know what happens when an OTA installs.
I've never installed an OTA! I'm always rooted, always will be!!!!
Just to be sure.
I did a factory data reset the night of the problem, been good ever since! I have not done anything to the phone except install a few apps. Should i be okay to take the OTA now? Sorry i just really want to be sure. This is my 3rd phone is 3 months so... no second chances.
SOLVED
Okay, so i took a chance on the update. It worked! I will not be rooting anymore until i read up. Sorry guys if you feel this thread was unnecessary. Just an FYI to any who are worried about taking the newest update after a factory data reset, don't be! Thank you to all:highfive:
Did everyone got an update ?
I still do not see update notification
From beast called HTC One X
It's a little late for this probably but for future reference if you are rooted and want to stop receiving OTA updates remove/rename/delete HtcOMADM_ATT.apk and HtcOMADM_ATT.odex from system/apps, wipe cache and dalvik. If you want to remove "AT&T software update" from the "Settings" then remove HtcOMADM_SettingsPlugin_ATT.apk and HtcOMADM_SettingsPlugin_ATT.odex from system/apps, wipe cache and dalvik.
wantabe said:
It's a little late for this probably but for future reference if you are rooted and want to stop receiving OTA updates remove/rename/delete HtcOMADM_ATT.apk and HtcOMADM_ATT.odex from system/apps, wipe cache and dalvik. If you want to remove "AT&T software update" from the "Settings" then remove HtcOMADM_SettingsPlugin_ATT.apk and HtcOMADM_SettingsPlugin_ATT.odex from system/apps, wipe cache and dalvik.
Click to expand...
Click to collapse
Excellent info!
ssteven232 said:
Okay, so i took a chance on the update. It worked! I will not be rooting anymore until i read up. Sorry guys if you feel this thread was unnecessary. Just an FYI to any who are worried about taking the newest update after a factory data reset, don't be! Thank you to all:highfive:
Click to expand...
Click to collapse
Looks like you will not be rooting anymore for a while now, since there is no method to root the 2.2 update. AT&T / HTC made sure the current rooting method won't work on it. Hopefully, the devs will eventually crack this one too.
I hope you knew that before making the dive ... I would have just unlocked the bootloader and flashed a ROM with the update baked into it to get the best of both worlds. But that's just me. I can't own an android without root access. To reach his own.
Sent from my HTC One X using xda app-developers app
borets.boris said:
Looks like you will not be rooting anymore for a while now, since there is no method to root the 2.2 update. AT&T / HTC made sure the current rooting method won't work on it. Hopefully, the devs will eventually crack this one too.
I hope you knew that before making the dive ... I would have just unlocked the bootloader and flashed a ROM with the update baked into it to get the best of both worlds. But that's just me. I can't own an android without root access. To reach his own.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Yeah, I hear what you're saying and you are right. The current rooting method does not work with the new hboot. But.... If you have your bootloader unlocked beforehand you can still still get root after taking the OTA... And you can still flash a custom rom afterwards, from what I understand you would just need to fastboot flash the boot.img. I haven't personally tried it because I like staying fairly stock, just seriously cleaned up with some mods (init.d support, wifi/usb tethering, missing apps replaced). One thing I am curious about and to be honest I haven't spent any time researching the answer, what kernel are the roms using that are based on the 2.23 (4.0.4) Asian RUU? I wonder because I know the combination of the AT&T 2.20 (4.0.4) update with the new kernel and radio is working very, very well on my phone! My quadrant went up 800 points and battery life is still ridiculously good! I also have to agree with "I can't own an android without root access" especially on AT&T. Personally I'm good to go until the Jelly Bean update! Decisions, decisions! :laugh:
wantabe said:
Yeah, I hear what you're saying and you are right. The current rooting method does not work with the new hboot. But.... If you have your bootloader unlocked beforehand you can still still get root after taking the OTA... And you can still flash a custom rom afterwards, from what I understand you would just need to fastboot flash the boot.img. I haven't personally tried it because I like staying fairly stock, just seriously cleaned up with some mods (init.d support, wifi/usb tethering, missing apps replaced).
Click to expand...
Click to collapse
I've never installed an OTA, so I wouldn't know either. Honestly, I don't know why one would do that, when the awesome devs here post ROMs with the latest OTAs and root prebaked into them. There are "modded" ROMs and "stock" (or close to stock) ROMs available to everyone's taste.
wantabe said:
One thing I am curious about and to be honest I haven't spent any time researching the answer, what kernel are the roms using that are based on the 2.23 (4.0.4) Asian RUU? I wonder because I know the combination of the AT&T 2.20 (4.0.4) update with the new kernel and radio is working very, very well on my phone!
Click to expand...
Click to collapse
Right now, I'm running CleanROM 4.5, which is based on the 2.23 RUU. I did install the 2.20 radio, thinking it would work better, since I'm on AT&T. I took a screenshot of the kernel screen for you.
wantabe said:
My quadrant went up 800 points and battery life is still ridiculously good!
Click to expand...
Click to collapse
Where was your improvement? Did the increase happen in the aspect/area that directly affects your daily use, or in some esoteric algorithm that the phone all of a sudden processes faster? I used to go crazy on quadrant scores, but now I don't really understand their value/accuracy. As long as the phone feels buttery smooth while lasting 5+ hours of screen time, I'm happy!
Since you're interested in the scores, I installed quadrant and ran it, so you can compare.
Sent from my HTC One X using xda app-developers app
in admiration, totally confused!
borets.boris said:
Right now, I'm running CleanROM 4.5, which is based on the 2.23 RUU. I did install the 2.20 radio, thinking it would work better, since I'm on AT&T. I took a screenshot of the kernel screen for you.
Click to expand...
Click to collapse
Hi, do you think you could point me in the right direction for this? I found the general thread on radios, but am at a total loss about what it means or what to do with it!
You knew this was the wrong section but posted here anyway? Not a good way to start your membership on XDA. First rule of thumb is to search before creating a thread. Google is a great source for information. For future reference, all questions belong in the Q&A section, where coincidentally, this is being moved to.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my HTC One X, using XDA Premium.
I was laying in bed (with food poisoning) trying to get some sleep, when I noticed my phone vibrated and randomly rebooted.
After it booted up to the Andy firmware update image, and finally to the home screen with the update message I knew I was screwed.
THIS WAS A FORCED UPDATE BY VERIZON. I NEVER ACCEPTED OR DECLINED ANYTHING (re: food poisoning)!
You WILL lose root, on device app searching (Apple legal bs), and probably your unlock!
The perfect end to a perfect night! THANKS Verizon! /sarcasm
mcduck$ said:
I was laying in bed (with food poisoning) trying to get some sleep, when I noticed my phone vibrated and randomly rebooted.
After it booted up to the Andy firmware update image, and finally to the home screen with the update message I knew I was screwed.
THIS WAS A FORCED UPDATE BY VERIZON. I NEVER ACCEPTED OR DECLINED ANYTHING (re: food poisoning)!
You WILL lose root, on device app searching (Apple legal bs), and probably your unlock!
The perfect end to a perfect night! THANKS Verizon! /sarcasm
Click to expand...
Click to collapse
What ROM were you running? It should have disable OTA's thats why I ask.
Brian Gove said:
What ROM were you running? It should have disable OTA's thats why I ask.
Click to expand...
Click to collapse
The title says rooted stock.
I was runing the stock touchwiz rom (with the VRGL2 or 1 baseband) rooted, stock recovery, and the bootloader unlocked.
I just checked the EZ unlocker app and it claims that the bootloader is still unlocked. I have no way of verifying this, but if true, I'm only half screwed until somebody finds a root method for the new firmware.
If/when that happens I'll be more than happy to flash away from Verizon's bs nonsense.
Grrr...
mcduck$ said:
I was runing the stock touchwiz rom (with the VRGL2 or 1 baseband) rooted, stock recovery, and the bootloader unlocked.
I just checked the EZ unlocker app and it claims that the bootloader is still unlocked. I have no way of verifying this, but if true, I'm only half screwed until somebody finds a root method for the new firmware.
If/when that happens I'll be more than happy to flash away from Verizon's bs nonsense.
Grrr...
Click to expand...
Click to collapse
Did you try re-rooting using current methods?
mcduck$ said:
I was runing the stock touchwiz rom (with the VRGL2 or 1 baseband) rooted, stock recovery, and the bootloader unlocked.
I just checked the EZ unlocker app and it claims that the bootloader is still unlocked. I have no way of verifying this, but if true, I'm only half screwed until somebody finds a root method for the new firmware.
If/when that happens I'll be more than happy to flash away from Verizon's bs nonsense.
Grrr...
Click to expand...
Click to collapse
Wow rooted stock with stock recovery. Why not custom recovery? That probably the reason the update went through. Still ridiculous though, don't get me wrong. I'm guessing you weren't doing a lot of flashing.
Sent from my Nexus 7 using Tapatalk 2
Zalithian said:
Did you try re-rooting using current methods?
Click to expand...
Click to collapse
Negative. I currently feel like crap (see OP) and don't feel like messing with my Windows laptop to try it.
Do you think there's any chance I could brick my phone when I attempt it? Or is it simply a will work/won't work thing?
mcduck$ said:
Negative. I currently feel like crap (see OP) and don't feel like messing with my Windows laptop to try it.
Do you think there's any chance I could brick my phone when I attempt it? Or is it simply a will work/won't work thing?
Click to expand...
Click to collapse
Pretty sure it will just work or fail, but I'd wait for confirmation from someone else first - better safe than sorry.
Can you supply your new Baseband Version number?
I just froze sdm 1.0. I went to the software update and it crashed. I so let's hope that stops the update...
Sent from Land Line using pay phone
epikos said:
Can you supply your new Baseband Version number?
Click to expand...
Click to collapse
I535VRLG7
epikos said:
Can you supply your new Baseband Version number?
Click to expand...
Click to collapse
marcucci217 said:
Wow rooted stock with stock recovery. Why not custom recovery? That probably the reason the update went through. Still ridiculous though, don't get me wrong. I'm guessing you weren't doing a lot of flashing.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I was going to play around with flashing different roms eventually, but after upgrading from a decrepit half working ICS flashed Droid X I was just happy to have fully working phone again. Unfortunately I was under the false impression that the jerks at Verizon would have given me the option to accept their so-called upgrade.
Didn't they already remove local search on Verizon? My phone came that way. Of course I didn't stay on stock once we were freed...
rooting with the rootdebugfs tool should still work!
I woke up to a failed update message. Ran the update again to see why it failed and it fails because it reboots into custom recovery. Rooted, unlocked, stock. Just have some apps disabled or frozen.
Can anyone point out where the in the directory the downloaded update zip would go to?
I didn't get an update message but I did check for one it was available for me. So I ticked ok and it downloaded but failed to update as expected because of the custom recovery I have in place.
But I can't find where the zip file download to.
I wanted to try and see if Chainfire's Mobile ODIN Pro would root the updated zip as it claims.
Cache>fota>update zip...you'll see it
sent from my freed beast...&ikiller
Yes my laziness allowed verizon to update both of my SGS3 to I535VRLG7. I hope I can reroot when I get a chance later.
I was running stock root on both devices.
Sent from my SCH-I535 using xda premium
Successful OTA Flash using Mobile Odin Pro and Kept Root/Unlocked Status
Hulk0069 said:
Cache>fota>update zip...you'll see it
sent from my freed beast...&ikiller
Click to expand...
Click to collapse
Thanks, running a backup now before I try Mobile ODIN Pro. Will update this post:
Edit: Ok, it seems I have a successful flash using Mobile ODIN Pro.
Mobile Odin Pro gave me some Warnings in advance before continuing the Flash.
1) EverRoot may need to remove Google Maps during the flash to free up some space... yadda yadda..
2) The Modem Image on your device does not match the signature check....yadda yadda..
3) 5 out of 499 system files do not match the signature checks in the OTA zip... yadda yadda..
NOTE: I disabled signature checks on both warnings before proceeding.
But you do that AT YOUR OWN RISK!!
From what I gather, Mobile Odin made its own OTA zip from the target file before flashing it
I"ve uploaded some screen shots.
IMPORTANT!
PLEASE RUN A BACK UP before attempting anything risky like this.
ALSO! and VERY IMPORTANT!!
If you are using CWM as your recovery PLEASE PLEASE PLEASE check the size of your backup before proceeding with the update.
It seems CWM is not working properly on my SGSIII because the backup file sizes were only about 22 MB's large.. and thats is SO NOT GOOD!!
I went into GooManager and Flashed TWRP over CWM and ran a backup via TWRP and checked the file size to be in the range of 2.34GB's and thats what it should be (IMO). The only thing that bugs me about both recoveries is the date is 1979-12-31.. and thats definately wrong..
Anyways, my way of checking for root after an OTA is to run Titanium Backup because it always asks for SuperUser Rights before loading.
So all is well with that and checking to see if the Bootloader on my device was still Unlocked with EZ-Unlock said it still was..
Thats all I can think for now..
Hulk0069 said:
Cache>fota>update zip...you'll see it
sent from my freed beast...&ikiller
Click to expand...
Click to collapse
Stock rooted & it tried & failed 2x to do the update and there is nothing in /fota/
I still have root
Second attempt it booted into recovery & I just restarted as it had a fail error
Hello Everyone,
I'm fairly new to rooting phones and ROMs so if this question dosn't make sense please destroy my inner child I have a rooted sgs3 using odin and factory verizon build but the problem I am having is with ClockwordMod I think. The samsung update restarts the phone but ClockworkMod starts up right away and won't let the update go through. Is there a setting I need to change to allow all updates to bypass ClockworkMod or is there another way for me to get the update?
Any help is much appreciated.
Justin
Sounds to me like cwm just saved you from an auto ota update.
I use twrp so i dont know the answer to your question but if you're rooted, why would you want an ota?
Update
maniac2k said:
Sounds to me like cwm just saved you from an auto ota update.
I use twrp so i dont know the answer to your question but if you're rooted, why would you want an ota?
Click to expand...
Click to collapse
Hello and thank you for the reply. I'm not sure that I need/want it though it continues to ask me to update so it's either keep saying defer or just let it update.
Of you download and flash one of the latest and greatest roms, you wont get asked to update. There is a way you can stop the ota but i dont remember off the top of my head. Im sure google knows. I would just flash a newer rom that includes the update.
hmmmm
maniac2k said:
Of you download and flash one of the latest and greatest roms, you wont get asked to update. There is a way you can stop the ota but i dont remember off the top of my head. Im sure google knows. I would just flash a newer rom that includes the update.
Click to expand...
Click to collapse
What would you say is the latest and greatest ROM and can I use odin to flash it? Also, if I flash a new ROM I lose everything that is on my phone right??
ndjustin20 said:
What would you say is the latest and greatest ROM and can I use odin to flash it? Also, if I flash a new ROM I lose everything that is on my phone right??
Click to expand...
Click to collapse
Well I have beans 12 and woke up and my phone also was booted into recovery and stopped the update.
Sent from my SCH-I535 using Tapatalk 2
ndjustin20 said:
What would you say is the latest and greatest ROM and can I use odin to flash it? Also, if I flash a new ROM I lose everything that is on my phone right??
Click to expand...
Click to collapse
It is going to keep rebooting into CWM if you don't tell it to until you tell it to stop rebooting to recovery, which is an option in the menu system after flashing. If the OTA update installation is being intercepted by CWM's presence on your phone, then I'm not sure if there is a way around it other than flashing a ROM. Someone with more experience will have to chime in.
With that said, should you choose to install a new ROM, there are a plethora of ROM options on XDA, at least some of which have OTA updates disabled. See the following link for a guide (I'm assuming you are on Verizon):
http://forum.xda-developers.com/showthread.php?p=32079760#post32079760
You can flash the stock, rooted ROM back on with ODIN, and then download EZ-Recovery (which has CWM) and load a custom ROM that way.
I use aokp but jellywiz is a nice stock like rom. Just download a rom and flash in cwm.
ndjustin20 said:
Hello Everyone,
I'm fairly new to rooting phones and ROMs so if this question dosn't make sense please destroy my inner child I have a rooted sgs3 using odin and factory verizon build but the problem I am having is with ClockwordMod I think. The samsung update restarts the phone but ClockworkMod starts up right away and won't let the update go through. Is there a setting I need to change to allow all updates to bypass ClockworkMod or is there another way for me to get the update?
Any help is much appreciated.
Justin
Click to expand...
Click to collapse
If you want the update you should flash back to stock and restore the stock recovery. You can reroot and unlock the boot loader after you update.
Im having same issue. Verizion trying to force my phone to have less features. I was able to ignore it 2 weeks ago but now it keeps trying to force the update and I can keep delaying it. Any good tools you all know of to just block ota updates all together? Pretty happy with stock rom as is no need to fix it minus the copy and paste bug.
You can use Titanium Backup to freeze SDM 1.0 and the update will quit downloading. I'm not sure if freezing apps is supported in the free version but the paid version is well worth it of you plan on switching ROMs.
You could also flash Scotts stock rooted Rom with the latest update, then your phone status will say up to date. I flashed the zip right on my phone through cwm but I'm sure you can use Odin too
Sent from my SCH-I535 using xda app-developers app
I was in the exact same situation as you. The phone will not update with Clockwork Recovery installed. I simply flashed back to the stock ROM via ODIN (stock.vzw_root66 which a quick search should locate), accepted the OTA update, and then used the beginner's guide in the Android Development forum to get back root.
I use Titanium Backup to freeze SDM 1.0. Like JBO1018 wrote, the PRO version is well worth the price, if only to freeze bloatware. Everything else it offers is gravy.
Questions go in Q&A
Thread moved
Thanks
I have a rooted, unlocked SG3 running stock ROM and as of a couple weeks ago, continue to get prompted to install the OTA update (VRAGL7 I believe). Unsurprisingly the install fails when I try to apply it.
My question is, do I have to restore in order to apply this update? And if so, is it possible to instead defer the update indefinitely (since I dont want to restore and there doesnt appear to be anything useful in this update according to their site).
Im also sure someone else must have asked this before, but after browsing the last few pages and searching, I couldnt find anything. Feel free to direct me to a previous response if I missed it.
Thanks in advance!
This has been covered numerous times, but, here you go. If you want to take the update, lock your bootloader, Odin back to stock, take the OTA update, reroot, unlock, etc.
If you don't want to do that, freeze SDM 1.0 with Titanium and the message will stop. One thing though, you will not be able to update OTA until you restore SDM. Which, you shouldn't be updating a rooted phone to begin with unless you want a world of problems.
Good luck!
Sent from my SCH-I535 using xda premium
So to be clear, absolutely no way to apply the update without going back to stock first, correct?
Sorry for posting up whats probably been asked 100 times, but really couldnt track it down with a search and browse of the last few pages.
Thanks again.
timofcourse said:
So to be clear, absolutely no way to apply the update without going back to stock first, correct?
Sorry for posting up whats probably been asked 100 times, but really couldnt track it down with a search and browse of the last few pages.
Thanks again.
Click to expand...
Click to collapse
I did not have to do all that...
I used Mobile Odin Pro to Pre-Inject Root into the OTA Update before flashing it, then I flashed the latest modem immediately after flashing the OTA update.
I didn't lose Root or Unlocked Bootloader status..
Best part of it was... I didn't need my PC to do any of it...
The following thread is the one you should read in detail..
http://forum.xda-developers.com/showthread.php?t=1887741
Perfect. Exactly what I was looking for.
Thanks again.
timofcourse said:
Perfect. Exactly what I was looking for.
Thanks again.
Click to expand...
Click to collapse
Glad to help..
tekrhino said:
I did not have to do all that...
I used Mobile Odin Pro to Pre-Inject Root into the OTA Update before flashing it, then I flashed the latest modem immediately after flashing the OTA update.
I didn't lose Root or Unlocked Bootloader status..
Best part of it was... I didn't need my PC to do any of it...
The following thread is the one you should read in detail..
http://forum.xda-developers.com/showthread.php?t=1887741
Click to expand...
Click to collapse
Make sure that you read it and pay attention very carefully. I tried to do the same exact thing and had problems. Had to Odin back to stock. I think my problem was that I was running a custom kernel. Anyway I got the unauthorized software message and could only get into stock recovery and download mode.
Guess I will read the thread myself and see where I screwed up at.
Sent from my SCH-I535 using xda premium