This thread is for those friends who are new to android.
I found that many of us, who wants to move from custom roms to stock roms through odin, have faced some big problems like MIBIB download or SETUP CONNECTION . This happened with me as well... when I moved from cyanogenmod to froyo. So, based on my experience, here are some suggestions which may help you:-
When you select the OPS file, check its name. Its name should be "BENI_v1.0.ops" (without quotes) otherwise odin will not show your device's model number at the top and will stop at MIBIB Download. Please Note that as soon as you select the ops file, odin will show the model number of the device in its title bar regardless of whether the phone is physcally connected to PC or not. In my case, the mbib download problem is solved by renaming the OPS file. You can now install the stock firmware as normal.
If odin is showing the message "setup connection" and your Galaxy Fit is still connected to PC (i.e. COM port mapping box is yellow), then try another stock firmware. In my case, odin stopped at setup connection when I was installing froyo, so then I tried the One Package Gingerbread firmware. And Odin successfully installed it(you can also try another usb port). After then, I went for Froyo once again & Odin successfully installed it too.
Please remember that doing things unknowingly may damage your device. Once the phone is in DOWNLOAD MODE, it can not be switched on either normally or in recovery. It can only enter in DOWNLOAD MODE. I had the two firmwares when I did all this.
Hope this helps...
Press thanks if I helped you...
U saved my day ....
stuck at mibib download HELP!!
sir i am stuck at this mibib download....my file name "BENI_v1.0.ops" is exactly same as yours but my odin is not moving further than mibib and whne i tried to go to recovery mode its show a sign displaying a phone disconnected to a pc monitor.....is this sign is harmful for my fit???
Plzzz sir help me out.....
Shubhrank said:
sir i am stuck at this mibib download....my file name "BENI_v1.0.ops" is exactly same as yours but my odin is not moving further than mibib and whne i tried to go to recovery mode its show a sign displaying a phone disconnected to a pc monitor.....is this sign is harmful for my fit???
Plzzz sir help me out.....
Click to expand...
Click to collapse
Note that if ur usb port malfunctions then odin will not proceed further. I recently noticed this major issue. Other errors like "checking plact platform verification" appear due to usb error. Try another pc or laptop(recommended).
1st & 4most, it's necessary that u tick "USB debugging" under "Android Settings->Application Development" b4 going to download mode.
Also, disable any antivirus, firewall...uninstall kies...& at last install/re-install ur Samsung Mobile Drivers. Use Odin 4.38.
The screen u mentioned appears when u exit download mode & try to switch it on either normally or in recovery. Don't worry...!!
1. Take out & re-insert battery.
2. Press "Volume Down & Home & Power button" & you'll again enter downloading mode.
If u want...I can provide u the firmware files that I always use
Hope this helps...!!!
MBIB and setup connection
I have got the same problems of MBIB download or setup connection error and after trying to on it in recovery mode it display image of mobile phone not connected to pc.
Please sort my problem ASAP, as I have only that one phone.:crying:crying:
gaurav.gupta180687 said:
I have got the same problems of MBIB download or setup connection error and after trying to on it in recovery mode it display image of mobile phone not connected to pc.
Please sort my problem ASAP, as I have only that one phone.:crying:crying:
Click to expand...
Click to collapse
Check ur pm.
gaurav.gupta180687 said:
have got the same problems of MBIB download or setup connection error and after trying to on it in recovery mode it display image of mobile phone not connected to pc.
Click to expand...
Click to collapse
Me too. Except on a GT-S5830i. Any help anyone? I have a .pit file etc but not sure what it is. Can't see the device in fastboot either
problem began after i factory reset the tab, my tab keeps rebooting everytime either when i connecting to a wifi network/turning off the wifi/going to settings. then it freezes, and shows the samsung logo indefinitely.
when i force reboot it no longer goes into the system but only to samsung logo. i had to factory reset everytime to get into welcome screen.
the tab also have a usb connection issue as it wont get detected by the pc
odin pro is available but kinda useless since it still have to download specific files the tab for it to work
my tab is currently running on 4.1.2 P6800DXMD3 with skyhigh 3.9.1 kernel.no custom recovery
hope my english is good enough
anybody here can help me?
1. Try wipe cache in recovery and flash stock kernel.
2. Try flash full official firmware package with Odin PC. You may need to factory reset again in recovery before first boot.
Best of luck
Sent from my GT-I9500 using XDA Premium 4 mobile app
UpInTheAir said:
1. Try wipe cache in recovery and flash stock kernel.
2. Try flash full official firmware package with Odin PC. You may need to factory reset again in recovery before first boot.
Best of luck
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
1. flash stock kernel via stock recovery? is that possible?
2. my tab just wont connect to pc. it just wont get detected. this is why my tab is in a ****hole right now.
mellovicious said:
1. flash stock kernel via stock recovery? is that possible?
2. my tab just wont connect to pc. it just wont get detected. this is why my tab is in a ****hole right now.
Click to expand...
Click to collapse
You didn't say (and haven't said) it wouldn't connect in Download Mode. I didn't assume.....
- Make sure you have both the latest Samsung USB and ADB drivers installed. Uninstall old ones, reboot, install new and reboot.
- Have you checked your USB cable is ok?
If you can't enter download mode, you could be hurting.
- If all you can do is enter stock recovery, and if you had USB debugging enabled, maybe it's possible to push to system and preload etc. with ADB.
Sent from my GT-I9500 using XDA Premium 4 mobile app
UpInTheAir said:
You didn't say (and haven't said) it wouldn't connect in Download Mode. I didn't assume.....
- Make sure you have both the latest Samsung USB and ADB drivers installed. Uninstall old ones, reboot, install new and reboot.
will try~
- Have you checked your USB cable is ok?
bought a new one just for the sake of this
If you can't enter download mode, you could be hurting.
my tab can enter download mode but odin wont detect it.
- If all you can do is enter stock recovery, and if you had USB debugging enabled, maybe it's possible to push to system and preload etc. with ADB.
im gonna assume usb debugging is disabled since i factory reset the tab. so the setting must have been reset as well? but then i cant to to settings then the tab would freeze.
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
im sure this is some kind of wifi bug if i just can flash the firmware it would be resolve but damn the cable really giving me a headache
my tab wont get detected by any of the pc i tried to connect it with.
i dont know what am i supposed to do anymore
mellovicious said:
my tab wont get detected by any of the pc i tried to connect it with.
i dont know what am i supposed to do anymore
Click to expand...
Click to collapse
Not sure is this will help but can you put the source files on an SD card and then use mobile odin pro to flash files then maybe you can get the tab to work. Best of luck.:fingers-crossed:
ColBill said:
Not sure is this will help but can you put the source files on an SD card and then use mobile odin pro to flash files then maybe you can get the tab to work. Best of luck.:fingers-crossed:
Click to expand...
Click to collapse
thanks for suggestion but i already resolve the prob :victory:
mobile odin still havent download the specific files for the tab so most of its features doesnt work. it doesnt even read files for sd card (not sure why)
but luckily i was able to flash custom recovery (twrp recovery) through it. so i had to push the files in via bluetooth from my phone.
well once in recovery just do all the usual stuff to flash the rom. using pac man right now. really wanted to use stock but i scared the bug would come again.
mobile odin literally saved my tab
THIS IS THE GUIDE FOR HOW TO UNBRICK S DUOS​
i have found many users of s duos asking how to unbrick s duos many times.So I am providing this tutorial to unbrick s duos
REQUIREMENTS
computer(with windows xp,7 or 8)
Device Drivers(click here)
ODIN (attached in attachments)
Disclaimer: I'm not responsible for any damage done to your phone.
1.Download the firmware of Your Country Click The Link Below
http://www.sammobile.com/2012/10/20/first-firmwares-galaxy-s-duos-online/
2.Extract The Zip Files You Downloaded Above
3. you will find tar.md5 file in it
4.Open odin
5.Click PDA-S7562XXBMG2_S7562ODDBMG1_S7562DDBMG1_HOME.tar(select this file)
6.now turn on the phone in download mode(vol up+home+power)
7.connect the phone with computer using USB cable(install drivers in computer before it)
8.Wait to yellow text appear in first box
9.Click START
10.And let ODIN do its work and wait till you see PASS in green color, it means the flashing process is completed successfully
11.Let the phone automatically Reboot
12.It's Done. Now your phone is unbricked
If you have Nandroid back up
1.place backup in sd card
2.open cwm recovery(vol up+vol down+home+power)
3.select restore
4.select the backup
5.select yes ,restore
6.the backup will restore.wait till complete
7.when it complete the restore,select reboot system
8.phone will reboot
9.It's done.
If you have hardbricked your phone and unable to boot recovery or download mode
then use one click unbrick tool
http://forum.xda-developers.com/showthread.php?t=1153310
Or use USB jig
http://forum.xda-developers.com/galaxy-s2/help/guide-how-to-make-usb-jig-reset-binary-t1604707
If any question ask me
Cheers, hopefully I wont need it....but comforting to know its here
:good:
help me help me....
i have Nadroid back up but when i restore it it show E: signature verification failed ! :crying::crying::crying::crying::crying:
bricked s duos
Vaibhav Chauhan said:
THIS IS THE GUIDE FOR HOW TO UNBRICK S DUOS​
i have found many users of s duos asking how to unbrick s duos many times.So I am providing this tutorial to unbrick s duos
REQUIREMENTS
computer(with windows xp,7 or 8)
Device Drivers(click here)
ODIN (attached in attachments)
Disclaimer: I'm not responsible for any damage done to your phone.
1.Download the firmware of Your Country Click The Link Below
http://www.sammobile.com/2012/10/20/first-firmwares-galaxy-s-duos-online/
2.Extract The Zip Files You Downloaded Above
3. you will find tar.md5 file in it
4.Open odin
5.Click PDA-S7562XXBMG2_S7562ODDBMG1_S7562DDBMG1_HOME.tar(select this file)
6.now turn on the phone in download mode(vol up+home+power)
7.connect the phone with computer using USB cable(install drivers in computer before it)
8.Wait to yellow text appear in first box
9.Click START
10.And let ODIN do its work and wait till you see PASS in green color, it means the flashing process is completed successfully
11.Let the phone automatically Reboot
12.It's Done. Now your phone is unbricked
If you have Nandroid back up
1.place backup in sd card
2.open cwm recovery(vol up+vol down+home+power)
3.select restore
4.select the backup
5.select yes ,restore
6.the backup will restore.wait till complete
7.when it complete the restore,select reboot system
8.phone will reboot
9.It's done.
If you have hardbricked your phone and unable to boot recovery or download mode
then use one click unbrick tool
http://forum.xda-developers.com/showthread.php?t=1153310
Or use USB jig
http://forum.xda-developers.com/galaxy-s2/help/guide-how-to-make-usb-jig-reset-binary-t1604707
If any question ask me
Click to expand...
Click to collapse
Neither oneclick unbrick works nor usb jig.....
KaranPartap said:
i have Nadroid back up but when i restore it it show E: signature verification failed ! :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
i think youhave applied that backup by stock recovery
Sagar_Patel said:
Neither oneclick unbrick works nor usb jig.....
Click to expand...
Click to collapse
have you hard brick your device?
S7562 Hardbrick
Vaibhav Chauhan said:
have you hard brick your device?
Click to expand...
Click to collapse
i had installed swapper 2.....after which i had tried to restart my s7562....but then there was only samsung logo and the device gets reboot until the battery drains....i cant go into recovery, download mode...i had enabled usb debugging on but the device cant be recognized by pc...it sounds like connecting and disconnecting within few seconds....
Sagar_Patel said:
i had installed swapper 2.....after which i had tried to restart my s7562....but then there was only samsung logo and the device gets reboot until the battery drains....i cant go into recovery, download mode...i had enabled usb debugging on but the device cant be recognized by pc...it sounds like connecting and disconnecting within few seconds....
Click to expand...
Click to collapse
have you tried both things?
usb jig and one clock tool
Vaibhav Chauhan said:
have you tried both things?
usb jig and one clock tool
Click to expand...
Click to collapse
Yes, i have tried both USB Jig and One Click tool...none of them worked...Jig did nothing and One click tool ends up with message failed!!!
However, it could be possible that my jig is faulty one, or the device has been bricked in such a way that neither it cant be dived into download mode even by this jig nor it can be repaired through One click.....whatever, i had given my device to expert and he has given my device back in working condition with only fault that i cannot use SIM card at all!!! Whenever i try to insert SIM, pop up appears saying unavailable sim, need to restart or something like that...Actually, I had noticed that the firmware used for my device was not from my country India and the one that was used was may be of china or one from gulf country in which there were no play store or google play service. Hence i had side loaded both apk but they could not be open even after that....So, i had restored cwm back up and i have got my stock rom back with working play store and all gapps but the sim problem starts thereafter as i mentioned above.....However, im going to flash the Indian stock rom again via odin....Do you have any suggestion for me?
Btw, expert has repaired my device using JTAG.
and.......Thanks for helping me...
Sagar_Patel said:
Yes, i have tried both USB Jig and One Click tool...none of them worked...Jig did nothing and One click tool ends up with message failed!!!
However, it could be possible that my jig is faulty one, or the device has been bricked in such a way that neither it cant be dived into download mode even by this jig nor it can be repaired through One click.....whatever, i had given my device to expert and he has given my device back in working condition with only fault that i cannot use SIM card at all!!! Whenever i try to insert SIM, pop up appears saying unavailable sim, need to restart or something like that...Actually, I had noticed that the firmware used for my device was not from my country India and the one that was used was may be of china or one from gulf country in which there were no play store or google play service. Hence i had side loaded both apk but they could not be open even after that....So, i had restored cwm back up and i have got my stock rom back with working play store and all gapps but the sim problem starts thereafter as i mentioned above.....However, im going to flash the Indian stock rom again via odin....Do you have any suggestion for me?
Btw, expert has repaired my device using JTAG.
and.......Thanks for helping me...
Click to expand...
Click to collapse
i think your sim.slot have hardware issues.
SIM problem in Stock rom
Vaibhav Chauhan said:
i think your sim.slot have hardware issues.
Click to expand...
Click to collapse
Ok, it seems that whenever i use stock rom, sim issue appears but if i use rom that the expert had loaded after repairing my device, it works fine with no issue. However, i dont know why i cant use play store and google play services ( ok, there is no gmail, google search or any other gapps)... if possible i would post here what rom the expert had loaded in my device...
But, i think the issue is related to software problem and more specifically, to CSC file somehow....what say?
Btw, thanks for helping me....
Sagar_Patel said:
Ok, it seems that whenever i use stock rom, sim issue appears but if i use rom that the expert had loaded after repairing my device, it works fine with no issue. However, i dont know why i cant use play store and google play services ( ok, there is no gmail, google search or any other gapps)... if possible i would post here what rom the expert had loaded in my device...
But, i think the issue is related to software problem and more specifically, to CSC file somehow....what say?
Btw, thanks for helping me....
Click to expand...
Click to collapse
looks like wrong country stock rom
Hi,
Recently, I did a Hard Reset on my GT-7562. [POWER +(VOL + VOL-) + HOME].
I wiped the cache partition and then wiped the user data.
After the reset the phone booted up and I did the initial setup [ Language, Wi-Fi & time].
Then, a "BLACK" screen showed up displaying only the time, battery status ,(network strength shows even though I didn't insert a sim) & nothing else. No apps, no home screen, nothing but a black screen.
What happened?? Did I follow a wrong method? What do I do now??
All I tried to do was get my phone back to the day I bought It.
Sagar_Patel said:
Yes, i have tried both USB Jig and One Click tool...none of them worked...Jig did nothing and One click tool ends up with message failed!!!
However, it could be possible that my jig is faulty one, or the device has been bricked in such a way that neither it cant be dived into download mode even by this jig nor it can be repaired through One click.....whatever, i had given my device to expert and he has given my device back in working condition with only fault that i cannot use SIM card at all!!! Whenever i try to insert SIM, pop up appears saying unavailable sim, need to restart or something like that...Actually, I had noticed that the firmware used for my device was not from my country India and the one that was used was may be of china or one from gulf country in which there were no play store or google play service. Hence i had side loaded both apk but they could not be open even after that....So, i had restored cwm back up and i have got my stock rom back with working play store and all gapps but the sim problem starts thereafter as i mentioned above.....However, im going to flash the Indian stock rom again via odin....Do you have any suggestion for me?
Btw, expert has repaired my device using JTAG.
and.......Thanks for helping me...
Click to expand...
Click to collapse
hey brother who was that expert plz wattsapp me 9795158553 i had same problem as u were my phone is completely dead nothing no recovery no download mode i do not know watt to do .....thnx in advance:crying:
how much cost for JTAG
Cannot Unbrick my I8262
Stuck at the below screen since quiet sometime any ideas??
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8262XXBNJ1_I8262ODDNJ1_I8262DDOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
Howdy,
I've screwed up with installing a custom rom over another custom.
Now I'm getting an error:
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again.
It's a tablet:
Samsung Galaxy Tab 2 10.1 (p5100)
In my computer im using windows 10 pro, and adb device is not regonized.
What I neeed to do to get pasted that error?
Thanks for the help!
There is nothing to worry.
It is easy to solve this.
Just download Odin in your pc.
Download the official firmware if your device here.
http://www.sammobile.com/firmwares/database/GT-P5100/
Now open Odin In pc
Connect your device to the pc .
Now in the app under PDA browse for the firmware you have downloaded and click start.
Wait till it says pass.
That's it you have successfully solved your problem.
Now it will take some time to boot.
In case you feel that you are in a bootloop just go to recovery and perform a factory reset .
Odin download http://odindownload.com/download/Odin3_v3.10.6.zip
HIT THANKS IF THIS HELPED YOU :good:
OOO thanks for the reply.
But I'm getting trouble to get into Download Mode, I mean I can't get in no matter what I do.
I've attacked a screen which I thing that Odin get's the device. Is this ok?
Thanks for the support!
_______
I've just flashed the TWRP recovery over the old one and know it works! YAY.... ODIN FTW
Zte blade l said:
There is nothing to worry.
It is easy to solve this.
Just download Odin in your pc.
Download the official firmware if your device here.
http://www.sammobile.com/firmwares/database/GT-P5100/
Now open Odin In pc
Connect your device to the pc .
Now in the app under PDA browse for the firmware you have downloaded and click start.
Wait till it says pass.
That's it you have successfully solved your problem.
Now it will take some time to boot.
In case you feel that you are in a bootloop just go to recovery and perform a factory reset .
Odin download http://odindownload.com/download/Odin3_v3.10.6.zip
HIT THANKS IF THIS HELPED YOU :good:
Click to expand...
Click to collapse
Greetings;
I don't know if you already entered Download Mode...
Most problems accessing Recovery and Download Modes are due to having the USB Cable connected.
Remove the cable; press the key combination; and it will boot.
(Except if there's some incompatible ROM flashed by mistake).
After that plug the USB Cable again (if your USB Drivers have also installed for Download Mode) Odin will recognize it (like shown in your Screen Shot).
REMEMBER:
While Flashing do NOT Remove USB Cable, untill Odin Displays "Pass" message.
Further issues: Let us know. We're would be Glad to help.
Since i can't post in the roms, kernals, etc I'll do it here. I hope the mods don't delete my post lol.
So my Galaxy S8+ (6955U) is rooted but I am trying to flash stock firmware onto it using Odin. Every time I am stuck on "File Analysis".
Here's everything I have tried:
1) Change USB port
2) Administrator mode and XP SP3 compatibility (i'm on w10 x64)
3) Re-partition checked/unchecked
4) Rebooted phone
5) rebooted computer
I've also tried using "adb reboot download" using adb to put it into download mode manually. when this happens, it goes from file analysis to "SetupConnection" but then it fails.
Please help me, I have been at this for about 4 hours and can't find anything online.
what odin are you using.
I got it thanks I don't know how to delete the thread lol