will sd-ext formatting still keep the sd-ext or would i have to re-partition it again??
Arjav23 said:
will sd-ext formatting still keep the sd-ext or would i have to re-partition it again??
Click to expand...
Click to collapse
^Nope, it'll just clear up the sd-ext data. The partitioning won't be affected.
So I guess...when changing ROMs it's safe to format the sd ext?
sent from my GT-I5801
raasm007 said:
So I guess...when changing ROMs it's safe to format the sd ext?
sent from my GT-I5801
Click to expand...
Click to collapse
Yup
Sent from my GT-I5800 using xda premium
hey guys ,
I faced this error a few times :my sd-ext partition used to become read only automatically . Due to this , I could not link any apps to sd-ext .
when I Googled it , I found that the fs converts sd-ext partition to read only as safety if it might get corrupted
formatting the sd-ext will make it read write but you will lose you data .
To solve this just follow this steps so that the data is not lost:
1.make a nandroid backup of current rom
2. go in recovery mode- mount and storage and format sd-ext ONLY
3.then go in backup and restore - advance restore . Select the nandroid file you just backed up
there will be options to restore just the system or just the data etc
4.choose sd-ext
it will check the md5 and restore your sd-ext partition making it read write too !
5. reboot to your rom
Sent from my GT-S5670 using xda premium
Sent from my GT-S5670 using xda premium
u can also directly select ext 4 in link2sd.....
if u hav already partitioned sd card.........
if the tom had ext4 support den do dis.....
it will never fail........
PRESS THANX IF I HELPED U
Hello,
I'm having troubles with sd-ext partition, infact, everytime i change rom, the rom is unable to mount it with apps like link2sd, s2e, mount2sd etc.. also installing the same rom, the problem returns. The only way i found is to delete all the partition and create new ones, i'm currently using twrp recovery. Everytime i change a rom i do a factory reset, and wipe system. My sd is 32gb, class 10; 890mb ext3 partion. Am i doing something wrong in the installation?
ROM currently installed: CM10 beta6 that I would like to install a memory script.
I hope that someone can help; sorry 4 bad english!
Happy easter
When you flash another rom before flashing wipe data then go to mounts and storage mount system and sd ext format it then flash !
Sent from my HTC Desire S using xda app-developers app
Gamersab said:
When you flash another rom before flashing wipe data then go to mounts and storage mount system and sd ext format it then flash !
Sent from my HTC Desire S using xda app-developers app
Click to expand...
Click to collapse
in the wipe menu of twrp 2.4.4.0 there isn't data, there are only cache, dalvik cache, factory reset, system, external storage, android secure.
there isn't a mount and storage button, but there is a mount button that allow to connect usb mass drive to computer
Gamersab said:
When you flash another rom before flashing wipe data then go to mounts and storage mount system and sd ext format it then flash !
Sent from my HTC Desire S using xda app-developers app
Click to expand...
Click to collapse
i try your procedure using cwm 6.0, doesn't work
Flash kernel 2.6 and try ..mounting and installing mount2SD from play
And when you create partition from recovery, create it from yannou90 cwm recovery... it should work well, rather than twrp/cwm6 created partitions.
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it
FrankKrue said:
Hello,
I'm having troubles with sd-ext partition, infact, everytime i change rom, the rom is unable to mount it with apps like link2sd, s2e, mount2sd etc.. also installing the same rom, the problem returns. The only way i found is to delete all the partition and create new ones, i'm currently using twrp recovery. Everytime i change a rom i do a factory reset, and wipe system. My sd is 32gb, class 10; 890mb ext3 partion. Am i doing something wrong in the installation?
ROM currently installed: CM10 beta6 that I would like to install a memory script.
I hope that someone can help; sorry 4 bad english!
Happy easter
Click to expand...
Click to collapse
Try using minitool partition wizard and convert ext 3 filesystem to ext2. Mounting problem solved for ROMS using kernel 3.
partition
use twrp recovery, try to create partition in recovery mode for
GB-ext3
ICS-ext4.
if u flash new rom , use superwipe script its clear all data...
I am using Cwm 5.2.x.x by anzhi !
There is the option of mounting and all that ! :/
Sent from my HTC Desire S using xda app-developers app
Gamersab said:
I am using Cwm 5.2.x.x by anzhi !
There is the option of mounting and all that ! :/
Sent from my HTC Desire S using xda app-developers app
Click to expand...
Click to collapse
my suggestion(myself did this and no problem till now)
flash latest twrp by bhargz16(thanks bhargz16)
go to advanced=>partition sd card
choose desired ext size and format=>swap 0
then swipe to partition
done :laugh:
remember to backup sdcard first
FrankKrue said:
Hello,
I'm having troubles with sd-ext partition, infact, everytime i change rom, the rom is unable to mount it with apps like link2sd, s2e, mount2sd etc.. also installing the same rom, the problem returns. The only way i found is to delete all the partition and create new ones, i'm currently using twrp recovery. Everytime i change a rom i do a factory reset, and wipe system. My sd is 32gb, class 10; 890mb ext3 partion. Am i doing something wrong in the installation?
ROM currently installed: CM10 beta6 that I would like to install a memory script.
I hope that someone can help; sorry 4 bad english!
Happy easter
Click to expand...
Click to collapse
I will only say can u test another card on same device.
Sent from my HTC Explorer A310e using Tapatalk 2
Before flashing another ROM you should mount system and sd ext to format
Sent from my HTC Desire S using xda app-developers app
your SD card might be having a problem change it and use better class SD card like class 6 or 10 woks best:fingers-crossed:
Try creating FAT32 partition using minitool partition manager.
Sent from my HTC Explorer A310e using xda app-developers app
Please help me...I flashed the FlyROM V4 correctly but its stuck at boot animation...when i go to mount sd-ext..its shows "Error mounting sd-ext"..is that the problem? If it is..how to solve it?
Make Sure You Made A Sd-Ext Partition Correct, To Check Whether You Made A Partition Correct Or Not, Just Mount Sd-Ext In Recovery, If It Mounts Without Any Error Then Just Go Ahead, But If It Shows An Error, It Means You Didn't Make A Partition Correct. So Now What You Need To Do Is:
1. Don't Partion Your SD Card By Using Recovery.
2. Partition It Via "Minitool Partition Wizard" Manually.
3. Create A Ext 4 Partition As Primary.
4. Now, Install Yannou's Recovery (The One Which You Install While Rooting)
5. Finally, Mount Sd-Ext And Flash Any Sense 4 Rom..
Note: Don't Use CWM Recovery, It Never Mount Sd-Ext At Any Cost.. Use Yannou's Recovery Or Philz Touch Recovery Instead..
Sent from my HTC Explorer using xda premium
thanks for replying here..i got the problem solved by just
1. removing old partitions
2. changing to philz recovery
3. making a new partition using philz and then flashing..
But now am unable to install any kind of memory script to increase internal memory..even after installing successfully .. the memory isnt increasing..what's wrong?
First open ur rom zip, navigate to system/etc/init.d and remove that 78mv2ext file and replace it with ur desired script and then reflash rom..
But do this at your own risk, if u get into a bootloop just reflash the rom with 78mv2ext script again..
Note: in sense roms, internal memory will always be 150 mb, but when you install apps its internal memory will not decrease as it decreases usually because of that Sd-Ext Partition you created..
Sent from my HTC Explorer using xda premium
lol i didnt know internal memory is always 150mb..but it doesnt decreases..if its true..then there's no problem.
I have minicm9 build 7 and i want move /data and /cache to sd partions without flashing new kernel because it make higher ram and battery usage
in mounts2sd there is a option for mounting these two partitions to ext.
shubhojit89 said:
in mounts2sd there is a option for mounting these two partitions to ext.
Click to expand...
Click to collapse
In app?
michal16 said:
In app?
Click to expand...
Click to collapse
Yes in the app
shubhojit89 said:
Yes in the app
Click to expand...
Click to collapse
There is only mounting cache
Mounts2sd
michal16 said:
There is only mounting cache
Click to expand...
Click to collapse
It seems like you are not well versed with mounts2sd..
I use int2ext.. In order to make you understand i installed it did it..
Open Mounts2sd app..
Install the startup script..
After install reboot..
Now again open the app
Go to settings tap the middle one with settings icon..
As you have already seen the cache one..
Scroll down to system..
Tick on all the options except dalvich one..
Dont tick on anything else
Restart your device..
Open mounts2sd app again you will /data mounted to ext partition and data partition being increased..
Hit thanks
shubhojit89 said:
It seems like you are not well versed with mounts2sd..
I use int2ext.. In order to make you understand i installed it did it..
Open Mounts2sd app..
Install the startup script..
After install reboot..
Now again open the app
Go to settings tap the middle one with settings icon..
As you have already seen the cache one..
Scroll down to system..
Tick on all the options except dalvich one..
Dont tick on anything else
Restart your device..
Open mounts2sd app again you will /data mounted to ext partition and data partition being increased..
Hit thanks
Click to expand...
Click to collapse
Now i can safely overclock?
michal16 said:
Now i can safely overclock?
Click to expand...
Click to collapse
Can you exactly tell me what do you need cz I can't understand what do you want and what to do..
Check the thread of that rom you will find the oc kernel plus the partitions you need to install oc kernel..
Plus the ques given doesnt link to oc kernel..
via Apache Helicopter
i have minicm9 build 7 and it have OC implemented but not mounting /data and /cache as microsd partitions so i will burn NAND. I want mount /data and /cache as microsd partitions to safely overcock (will not burn NAND). Custom kernel mounting but when i got it i have bigger ram and battery usage.