[Q] Having some issues with the S-Pen - Galaxy Note 10.1 Q&A, Help & Troubleshooting

Ok, Here goes. FIrst off I would like to say I am on a 32GB Note 10.1 N8013 which has been rooted with the CWM method and I am also past my return and exchange window at Best Buy.
A few days ago my S-pen suddenly stopped working suddenly. Every time I removed it from the tablet touch would stop working completely and i would have to reboot the tablet. (the popup menu would still disappear when i put the pen back in the slot). I looked in the forums and saw that some people had similar issues, such as Mitchellvii here: http://forum.xda-developers.com/showthread.php?t=1848838&highlight=not+working
I tried everything in that thread from flashing stock kernel, recovery and UEALH2 firmware (both pre-rooted by Entropy and bone stock from Jaaka), but nothing works. Now every time the tablet goes to sleep the touch is unresponsive and I have to reboot. The S-pen still does not work and I have no idea what to try next.
Any ideas would be greatly appreciated.
-jjflemin
Mods can delete this. Everything works again after flashing stock UEALH2 from Jaaka, flashing Entropy's Triangle Kernel and rooting with CWM method. Kind of strange that the pen didn't work until it was rooted again.

wait, so are you saying that you managed to get the S pen working again after flashing stock UEALH2 and Entropy's kernel, but after you rooted the note it stopped working again?

Where is this triangle kernel you're speaking of? None of entropy's posts mention triangle kernel, I only see stock, rooted stock and CM posts.
Sent from my LG-P920 using xda app-developers app
EDIT:
I got it to work:
1. Flash this:
http://forum.xda-developers.com/showthread.php?t=1849994
2. Flash the UEALH2 from here:
http://forum.xda-developers.com/showthread.php?t=1853209
that should do the trick. Installing CWM and SuperSU did not fix the problem for me. Flashing rooted stock and kernel did.

http://forum.xda-developers.com/showthread.php?t=1849015
That is Entropy's kernel with triangle away support.
What I meant was that it didn't work right away once I flashed UEALH2 and stock kernel, but started working again when I rooted it with the CWM method. Really not sure why that would be.

Related

[Q] NexusS (i9020T) hard bricked, at which step did I go wrong?

Hi everyone, I had a problem with my previous nexus s (I have since gotten a working replacement) and I was wondering where exactly I messed up so in the future I can avoid this
Here is what I did on my previous phone:
1. I flashed ics onto my device from the ota update package from androidcentral, it was 4.0.3. (This worked great and I had it on my phone for 2-3 months before I tried the next steps.)
2. I rooted my device successfully using the guide at nexusshacks.
3. I also flashed TWRP recovery (fastboot) and superuser using the above guide/links
4. When I would turn off my phone it would boot to a screen with a red triangle and an opened android bot. So what I would have to do is flash twrp recovery everytime I turned the phone on just to get it to work.
5. What I wanted to do was keep the stock rom but still have twrp recovery without it making me reflash it on every boot. So I clicked install and tried to flash the stock rom (update package from the link in step 1) with twrp recovery. It then turned off my phone and hard bricked it. I couldn't turn it on anymore and a new battery didn't fix it.
I was able to get a replacement now and I was just wondering at which step did I go wrong? I THINK that I should have wiped my cache before I tried to reflash the stock rom but maybe I'm way off base here. This is why I posted a question here so hopefully some of you guys can help.
I did think about posting in another thread, but I didn't wanna threadjack or anything... and his problem also seemed a bit different then mine. Also, sorry about not being able to provide the specific links it won't let me post them until I've posted 8 times.
I don't know for sure but team win recovery has been reported to corrupt the device's efs directory. I've even had problems myself using clockwork recovery. I've moved on to razor recovery and haven't looked back.
This is the most flash-friendly phone I've ever owned, and razor recovery rivals amon ra (which was awesome on my g1 and evo). I really think it may have just been the recovery you were using... Somebody correct me if i'm wrong.
Sent from my Nexus S 4G using Tapatalk
I had once corrupted one of the partition. I fixed to by flashing stock recovery and stock rom.
Use adam outler's unbrickable mod tool. It can be found in android development section.
Sent from my Nexus S using XDA
Thanks for the replies.
That's interesting about twrp... I didn't know that. Truth be told, the only reason I went for it over other ones like clockwork mod was because the UI looked pretty nice and easy to use. Also the guide I followed at nexusshacks used that, so I wanted to stay consistent with it.
jishnu7, it's a little late for that now however as I actually have already received a working replacement from my carrier, but in the future if something ever does go wrong (hopefully not) I will definitely check that out.
The main thing I'm wondering is if it messed up because I tried to reflash the stock rom essentially over top itself (was hoping that by doing that, it would stop making me reflash twrp on every reboot) or if it was because I didn't wipe the cache before the flash.
Also, what I really wanted to do with my phone was to keep the stock rom but be able to overclock my cpu/gpu. I was hoping I could set different overclocks for different things (I've heard of kernels where you can downclock your phone when the screens off and have it overclocked slightly while you're using it, that would be something I'd like to have). I figured to install those kernels I would have to root my phone, replace stock recovery and install superuser so that's why I tried to do that. Once again, I'm pretty new to all this stuff for my phone.
Sorry to bump this thread again, but I would really like to know how I could avoid what happened to me for the future. I think it's because I flashed the stock 4.0.3 rom over itself (was hoping that by doing that twrp recovery would stay on the phone after reboot).
What I would like to do is install something like CM9 or AOKP and use the Matr1x kernel so I could undervolt or overclock my phone.
I seriously dont get how u hard bricked your phone...
the reason you are thinking is you reflashed stock rom without wiping cache, as per my experiece its not at all the reason
now, whats my experience??
...I have some fault with my nexus device and I'm working on it,,and I did everything I could do...one of the thing out of those things was reflashing stock rom without wiping,and i did it quite a several times...my device never hard bricked,,however it was soft bricked for many times,,and i recovered from it
so reflasing a stock rom over stock rom, over ICS, over some themed custom rom,will not hard brick your device, you must be missing something none of your steps sounds suspecious
P.S:- pulling out battey while flashing something like this sounds suspecious, never tried though
I'm not sure what happened either to be quite honest with you. Since giving it another shot now with my new fresh phone I have had great success!
I did everything I wanted to do all in one go. Rooted it, install CWM touch, install AOKP (went with milestone 4 cuz I heard newest build 29 has some bugs) + gapps and installed matr1x kernel 18.5 bfs.
The only thing I did different from last time was installing CWM touch (instead of twrp) and flashed aokp this time (instead of reflashing 4.0.3 over itself).
I would just avoid step 2 at all cost.
The nexus s hacks dude is a tool.

Help! boot loop

ok so i rooted a few weeks ago and downloaded the usual apps. super user titanium back up and clock work mod. tried to flash a rom with clock work mod and got the e:signature verification failure message. found a post for a kernal that made clock work mod actually work so i tried to flash a rom. zSimplyAOKPV5_Dark to be exact. now it sticks on boot screen. i have searched for hours and cannot find a way to fix my problem. its my first rooted android and first attempted rom flash and i botched it right off the rip. please help?
Depending on what you did beforehand, you have some options.
If you have backed everything up previously, just flash back to stock with one of the one-click stock roms in the Development section (they're in a sticky).
If you haven't backed everything up, try holding V+/V-/power until it reboots. If it doesn't take you to recovery, you can try to flash a kernel (most likely one that would match the version of android/rom you were running prior to this flash) and see if it lets you into recovery. You'll have to flash it with either Odin or Heimdall, after rebooting into download mode (power off, hold V+/V-, insert USB).
If that doesn't work, though, the stock flashing would probably be your best and/or only bet.
it wont allow me into recovery though i can get to download mode by pulling the battery and pressing just the volume +- and plugging in the usb. i was trying to flash an ics slim rom. thanks for your very speedy response.
i have now tried to flash a stock rom however it is not working from there even with the stock kernal. now it is hanging on the at&t screen.
ok i got it. seems the kernal i flashed to help cwd work properly was the culprit. now i dont know how im going to flash this ics rom im looking at without it.
phoenixfriend said:
it wont allow me into recovery though i can get to download mode by pulling the battery and pressing just the volume +- and plugging in the usb. i was trying to flash an ics slim rom. thanks for your very speedy response.
i have now tried to flash a stock rom however it is not working from there even with the stock kernal. now it is hanging on the at&t screen.
ok i got it. seems the kernal i flashed to help cwd work properly was the culprit. now i dont know how im going to flash this ics rom im looking at without it.
Click to expand...
Click to collapse
Flash corn kernel if you have stock gingerbread
Sent from my SGH-I897
The utility in my signature can help you flash the Corn Kernel so that you will have CWM.
I have corn kernal and odin 3 on the computer at home. Ill do that tonight. Any suggestions on a good stable rom for a noob? Preferably ics. I hated posting for fear of being flamed as a noob. My wife keeps making fun of me for it so I kinda have to get it done. I want to fix hers also. Its a great little phone it just seem a bit buggy to me. Very laggy. Thanks for all the help.
Sent from my SAMSUNG-SGH-I897 using XDA
Maybe start with a KK4 based rom such as Legend and then move up to ICS after that. I only say that because there is a bug in ICS that could render your internal SD unusable. It's rare, but when it happens you will not be happy.
Still unable to get corn kernal to flash. I've tried a few of your guys fixes but I'm gonna have to get some other updates to my computer first.
Sent from my SAMSUNG-SGH-I897 using XDA

[Q] Would Samsung fix my bricked phone?

I bricked my unlocked Captivate (bought on Amazon for $240 - I was avoiding a data plan) trying to get Ice Cream Sandwich on it. The phone was rooted.
Initially, the phone was only loading a Samsung splash screen when I tried to get it into normal mode. However, recovery mode was working; it would boot into Clockworkmod. Which is a bad thing considering they would easily tell I had messed with it!
So, I loaded the phone into Download mode and tried to flash the stock ROM using Odin. Odin said "failed" and now my phone was completely soft bricked, and the infamous "[phone]-----/!\-----[computer]" screen was showing up. Download mode worked though. I tried to flash all types of stock and custom ROMs to no avail. Now, recovery and normal modes don't work while Download mode does.
So, I called Samsung and told them it wasn't working; they told me it was still under warranty and I could send it in for repairs.
My question would be: will Samsung repair my phone, or will they find out I messed with it and refuse to do so? Also, if they find out, how much will I have to pay them to fix it?
Getting a new phone is out of the question... I might just buy
If there is an odin flash counter on download mode, they will figure it out if you have messed with it. If there's not, make a good story. Was it on 2.3.6 already when you bought it?
If you can get into download your not bricked. The screen you see is kernel panic. You will have to flash a proper kernel to get it to boot back up.
Sent for a corner cell in Arkham
Yeah, you can still fix it. No need it to bring to samsung
Has anyone sent a bricked phone in to Samsung before?
I tried flashing stock Captivate Gingerbread kernels to no avail. I googled and googled, and I tried everything I found. Including Odin and heimdall.
It was running Gingerbread 2.3.5 when I updated it myself to Ice Cream Sandwich 4.0.3. It was running beautifully. Then I tried to recover my backed-up data, which worked, but then I tried to reboot the phone and it wouldn't boot.
And no, I don't remember seeing any "flash counter." Would they still be able to tell?
Has anyone sent a bricked phone in to Samsung before? If so, what were the results?
Also, how much do you think Samsung would charge me to fix it if they found out and voided the warranty? Hopefully less than $50? And they would charge me for shipping too, right?
random_person1308 said:
I tried flashing stock Captivate Gingerbread kernels to no avail. I googled and googled, and I tried everything I found. Including Odin and heimdall.
It was running Gingerbread 2.3.5 when I updated it myself to Ice Cream Sandwich 4.0.3. It was running beautifully. Then I tried to recover my backed-up data, which worked, but then I tried to reboot the phone and it wouldn't boot.
And no, I don't remember seeing any "flash counter." Would they still be able to tell?
Has anyone sent a bricked phone in to Samsung before? If so, what were the results?
Also, how much do you think Samsung would charge me to fix it if they found out and voided the warranty? Hopefully less than $50? And they would charge me for shipping too, right?
Click to expand...
Click to collapse
You recovered your apps thru TB? If yes, Didn't you read that you're not supposed to restore apps from titanium from GB to ICS? Might cause problem like this. No flash counter, they're not gonna notice this. Have you tried flashing again stock GB rom?(not just a kernel but a rom) And when you flashed that GB kernel, was that after you flash an ICS rom? Remember, when you're on ICS, you must use ICS kernel and not GB kernel. If it didnt work Just make a good story! Tell them you updated it through kies and updating was interrupted. Im pretty sure 2.3.6 is out on captivate. If they tell you its your fault for updating it, ask them why did they put update on kies when you can't even use it. Plus, they didn't warn you not to update it.
cessprin00 said:
You recovered your apps thru TB? If yes, Didn't you read that you're not supposed to restore apps from titanium from GB to ICS? Might cause problem like this. No flash counter, they're not gonna notice this. Have you tried flashing again stock GB rom?(not just a kernel but a rom) And when you flashed that GB kernel, was that after you flash an ICS rom? Remember, when you're on ICS, you must use ICS kernel and not GB kernel. If it didnt work Just make a good story! Tell them you updated it through kies and updating was interrupted. Im pretty sure 2.3.6 is out on captivate. If they tell you its your fault for updating it, ask them why did they put update on kies when you can't even use it. Plus, they didn't warn you not to update it.
Click to expand...
Click to collapse
No, I used Clockworkmod to recover data. It worked, and then I hit "reboot system now," and the phone wouldn't boot.
I already shipped the phone off, but thanks for the help, I really appreciate it! If Samsung doesn't fix it I know what to do now!
Ok, so I've been doing some research over the past few weeks and I figured out what I did wrong. I inadvertently tried doing a Nandroid restore (i.e. - restoring the whole system) instead of just apps. And I didn't wipe data first. That's why it was failing to boot. Why I couldn't flash the stock kernel from Odin; I have no idea.
As for the phone; Samsung fixed it free of charge (all they had to do was a reset...) and sent it back to me.
After getting it back, I rooted and installed Clockworkmod recovery using Corn kernel version 7.05. Geeve420 has an excellent guide over on androidforums.com. Then I flashed Cyanogenmod9 RC2, then Slim ICS version 4.2. It's running smoothly, though in 24 hours I have had 1 freeze (I did a battery pull and restarted) and a few force closes.
I also installed that Google Now app (the thread on XDA is called "The Google Now for ICS Project"). In other words, I went from being a complete n00b to getting JellyBean software on my phone! All I did was follow the directions, step-by-step, and it worked.
Thanks to all who helped!
random_person1308 said:
Ok, so I've been doing some research over the past few weeks and I figured out what I did wrong. I inadvertently tried doing a Nandroid restore (i.e. - restoring the whole system) instead of just apps. And I didn't wipe data first. That's why it was failing to boot. Why I couldn't flash the stock kernel from Odin; I have no idea.
As for the phone; Samsung fixed it free of charge (all they had to do was a reset...) and sent it back to me.
After getting it back, I rooted and installed Clockworkmod recovery using Corn kernel version 7.05. Geeve420 has an excellent guide over on androidforums.com. Then I flashed Cyanogenmod9 RC2, then Slim ICS version 4.2. It's running smoothly, though in 24 hours I have had 1 freeze (I did a battery pull and restarted) and a few force closes.
I also installed that Google Now app (the thread on XDA is called "The Google Now for ICS Project"). In other words, I went from being a complete n00b to getting JellyBean software on my phone! All I did was follow the directions, step-by-step, and it worked.
Thanks to all who helped!
Click to expand...
Click to collapse
Good for you then Try not to mess with it again. Haha. Do a lot of reading if you're a little hesistant. Plus, asking before doing so is not problem. We have a lot of helpful xda members here to guide you. Goodluck!

[Q] Imo Lean Kernel, CWM and OTA

Will I need to flash the stock kernel back on my phone to take the OTA or will it work with Imo's kernel? I tried to reflash the boot.img from my nandroid and wifi was not working, so I reflashed Imo's kernel and wifi works again and I am sitting in a holding pattern. I'd rather not have to ODIN back to full stock because I only have access to PC's at work and don't really have time in the day at work to be doing stuff like that while there.
Also can I just download EZ Recovery and flash the stock recovery?
Phone is rooted, unlocked, CWM with Casual and Imo's Lean Touchwiz kernel. TIA
What exactly makes you want the update? If it's the radio (which imo is the only reason to consider the OTA) then just get the radio and flash it in CWM.
i already have the radios flashed but I've had this weird issue that seems to only happen after flashing the kernel but has only happened on a few occasions mainly on the weekends at my daughter's 2 soccer games to be exact. Camera and video have acted weird, first was video controls were upside down, had to reboot a few times for it to fix and just yesterday everything I shot shows fine in gallery but when I go to import into Instagram the pics are all rotated 90 degrees.
I can't afford to have data issues which is the reason I haven't installed a custom ROM since I use my phone for work quite a bit. Figured go back to stock kernel, take OTA to clean out any weird issues that would linger and wait for either official JB or for ROMs to get solid on data issues.
mav3rick478 said:
Also can I just download EZ Recovery and flash the stock recovery?
Phone is rooted, unlocked, CWM with Casual and Imo's Lean Touchwiz kernel. TIA
Click to expand...
Click to collapse
Yes, but remember if you don't already have the OTA notification nothing with come just because you removed the custom recovery. If you've already received that notification then disregard this post.
Sent from my SCH-I535 using xda app-developers app
Thanks Snoop, been getting the OTA notification for 2 weeks now. I thought originally after it failed because of CWM it disappeared but woke up a few mornings to my phone being in CWM asking if i wanted to install the OTA and thinking to myself, "good god how long has my screen been on?!"
mav3rick478 said:
Thanks Snoop, been getting the OTA notification for 2 weeks now. I thought originally after it failed because of CWM it disappeared but woke up a few mornings to my phone being in CWM asking if i wanted to install the OTA and thinking to myself, "good god how long has my screen been on?!"
Click to expand...
Click to collapse
No problem. If you still notice weird issues then Odin to an older firmware and accept the OTA from there.
Sent from my SCH-I535 using xda app-developers app

[HELP] Splash Screen Bootloop, Heimdall One-Click doesn't work

A few more things you should know before I get into it. First off, this is my mother's phone, and about two days ago, she went to unplug and use her SGS4G after it had been charging overnight, and it wouldn't respond to the Power/Lock Button (It appeared simply stuck). So, naturally, she did a battery pull on it, and tried to turn it back on. After she hit the Power Button though, the Splash came up like it normally does, except instead of progressing with booting, the screen went black for a second and then went back to the Splash and it did/does this indefinitely (An obvious sign of a Bootloop).
Now. What doesn't make sense to me is that this was running the Stock ROM (I don't know if it was Froyo or Gingerbread), yet this still happened. I haven't tampered with the Phone at all, and my mother isn't too fond of the idea of Rooting, so unless the previous owner (Yes, it is a used phone) tampered with it and then restored it to Stock, then I have no idea.
Things I have tried:
Heimdall One-Click For Dummies (With and Without flashing Bootloaders)
Juls317's Noob Guide's "Potential Problems" section (With both Heimdall and ODIN)
A few Kernels (bhundven's Kernel, drhonk's KG4 Kernel)
sygee's ODIN/Heimdall Flashable ROM
hailthetheif's Step by Step Rooting Thread
Also, after I flash anything, whether it be with ODIN or Hiemdall Suite, or Hiemdall's One-Click, if I leave the phone plugged into the computer afterward, it will go to the Splash Screen and then to the Battery Screen (Which doesn't work, it just freezes with the Loading Wheel) and it'll Bootloop with the Battery Screen. If I unplug it after Flashing, it goes back to the classic Splash Bootloop that has been happening since Day 1. It doesn't even get past the Kernel.
I know that at least the Kernel and the Bootloaders can be Flashed however, by how they act on the Device. For example, if I flash certain Gingerbread Bootloaders, I can only get into Download Mode with PWR + VOL-, whereas on the Froyo Bootloader (Includes Stock), you use VOL+ + VOL-. With the Kernel, for example, if I flash a TeamAcid Kernel, their Logo comes up on the Splash Screen, but it still does the Splash Bootloop no matter what.
One final thing, if I flash a Kernel/ROM that includes a Recovery Mode, I can't access it at all (PWR + VOL+). I couldn't/can't access the Stock Recovery at all either.
One final thing, if I flash a Kernel/ROM that includes a Recovery Mode, I can't access it at all (PWR + VOL+). I couldn't/can't access the Stock Recovery at all either.
Pull the battery, hold power& both volumes, drop the battery back in. Should bring you to recovery (gb, not sure, can't remember froyo same or not). Wipe data & cache etc.
On the heimdell, awesome threads that you quoted. Follow directions and it should get you there. Kj6.. you may have to flash it twice to get the bootloaders for gb(it's setup that way so you can't fubar it without trying really hard). You would have to check the load boot loader box on second flash.
I just had this same exact issue. No matter what I flashed, it wouldn't work. Just kept with the boot loop. Now the difference with my issue was, I was still able to get into CWM and/or Download mode. (I was running custom rom). Heimdall wouldn't work for me because it was a driver issue. Odin, well, all the links I found for Odin were dead..
Anyway, when you're working with Heimdall, does it recognize your phone and flash? I had to flash it over twice for it to get to work. It is possible she was on Froyo and you're trying to flash it over with a GB stock rom could be causing an issue. Someone correct me if I'm wrong.
I'd say try sourcing a Heimdall to Stock Froyo ROM and see what happens from there.
This thread helped me out the most:
http://forum.xda-developers.com/showthread.php?t=2042927&highlight=frozen+at+boot
LiangChi said:
I just had this same exact issue. No matter what I flashed, it wouldn't work. Just kept with the boot loop. Now the difference with my issue was, I was still able to get into CWM and/or Download mode. (I was running custom rom). Heimdall wouldn't work for me because it was a driver issue. Odin, well, all the links I found for Odin were dead..
Anyway, when you're working with Heimdall, does it recognize your phone and flash? I had to flash it over twice for it to get to work. It is possible she was on Froyo and you're trying to flash it over with a GB stock rom could be causing an issue. Someone correct me if I'm wrong.
I'd say try sourcing a Heimdall to Stock Froyo ROM and see what happens from there.
This thread helped me out the most:
http://forum.xda-developers.com/showthread.php?t=2042927&highlight=frozen+at+boot
Click to expand...
Click to collapse
It does recognize the phone, and it does Flash (As far as I know). I used Zadig, so there shouldn't be an Driver problems. I flashed it several times with a lot of different things, however, I just now flashed it twice with the Heimdall One-Click again to see if that made any difference. It did not. I'm still stuck in that Splash Bootloop.
Also, what did you mean by, "I'd say try sourcing a Heimdall to Stock Froyo ROM and see what happens from there."? I haven't ever seen that suggested anywhere, and I have no idea where I would find a Stock Froyo ROM that is flashable via Heimdall.
Able to get in to recovery and wipe? Wipe data & caches. Got cwm? Which one click? Eilleo(sorry for the spelling) put out a one click that was to be used as stepping stone to ics only.
WinterPhoenix96 said:
It does recognize the phone, and it does Flash (As far as I know). I used Zadig, so there shouldn't be an Driver problems. I flashed it several times with a lot of different things, however, I just now flashed it twice with the Heimdall One-Click again to see if that made any difference. It did not. I'm still stuck in that Splash Bootloop.
Also, what did you mean by, "I'd say try sourcing a Heimdall to Stock Froyo ROM and see what happens from there."? I haven't ever seen that suggested anywhere, and I have no idea where I would find a Stock Froyo ROM that is flashable via Heimdall.
Click to expand...
Click to collapse
I'm honestly not to sure if a Froyo ROM for Heimdall exists. I do believe seeing one for Odin, though. Not sure if that link is still alive. I'll see if I can find it again.
We do have a Froyo One-Click but if KJ6 One-Click is not working for him I do not know why you think the Froyo One-Click will.
lumin30 said:
We do have a Froyo One-Click but if KJ6 One-Click is not working for him I do not know why you think the Froyo One-Click will.
Click to expand...
Click to collapse
I figured if the phone was still running on the Stock Froyo when this happened, that it may work as opposed to forcing the phone to accept a new ROM while it's still clashing with itself.
It's worth a shot at this point.
Stuck on Froyo
LiangChi said:
I figured if the phone was still running on the Stock Froyo when this happened, that it may work as opposed to forcing the phone to accept a new ROM while it's still clashing with itself.
It's worth a shot at this point.
Click to expand...
Click to collapse
I hate to hijack this thread but it describes my current situation and symptoms perfectly and I never saw a conclusion / fix.....
I just got a used phone from ebay (verified SGH-T959V in battery compartment) and have run into the same exact problems described in the start of this posting. Phone was running Froyo and I attempted to upgrade to Gingerbread with Heimdall One-Clicks. I was actually successful at one point but then it crashed when I tried to install boot loaders to get rid of rainbow screen at startup.
Now all I ever get is a splash screen bootloop whenever I try any of the Heimdall One-Click gingerbread variants. I have also tried Odin and the Gremlin remover with same results of splash screen bootloop (Linda always completes). I was however able to access the new kernel CWM recovery and try to flash other gingerbread ROMs - splash screen bootloops on all attempts.
So I gave up on Gingerbread and tried using CWM recovery from gingerbread ROMS to install CM9 / CM10 / Slim Bean. I was able to upgrade almost perfectly but had same problem for each one of these. Not the bootloop thankfully but instead the headphone speaker (if that is the right description) doesn't work. No sound for phone touchpad, screen selections, and when receiving a phone call (have to switch to speaker phone as back/big speaker works or plugin headset to hear whoever was calling).
All of the other features were great but I really needed to be able to use my phone as a phone! The Heimdall One-Click worked to return me to Gingerbread with same problem of splash screen bootloop (gets to pink welcome letters every once in a while). Then I used the Heimdall One-Click for Froyo (as suggested by LiangChi) and got a perfectly working version of Froyo.
Used Froyo CWM recovery to switch to ICBINB ROM which works fairly decently.... Am I doomed to stay at Froyo though? I tried to follow all of the guides to a T but not sure what I might be doing wrong or if I might have purchased a damaged phone - can't recall ever testing camera and it still doesn't work on current stable Froyo. At various points I tried different cables, SD cards, USB ports, removing/reinstalling drivers, etc... Even tried Kies when I got back to stock Froyo to upgrade - went to Splash Screen Bootloop!
You have so much info here... let's see what we can figure out.
grovernyc said:
I hate to hijack this thread but it describes my current situation and symptoms perfectly and I never saw a conclusion / fix.....
I just got a used phone from ebay (verified SGH-T959V in battery compartment) and have run into the same exact problems described in the start of this posting. Phone was running Froyo and I attempted to upgrade to Gingerbread with Heimdall One-Clicks. I was actually successful at one point but then it crashed when I tried to install boot loaders to get rid of rainbow screen at startup.
Now all I ever get is a splash screen bootloop whenever I try any of the Heimdall One-Click gingerbread variants. I have also tried Odin and the Gremlin remover with same results of splash screen bootloop (Linda always completes). I was however able to access the new kernel CWM recovery and try to flash other gingerbread ROMs - splash screen bootloops on all attempts.
Ok... when you flash the "stock" rom... have you tried to wipe cache, data etc???
Are you letting it boot up before appling any of the kernels??
So I gave up on Gingerbread and tried using CWM recovery from gingerbread ROMS to install CM9 / CM10 / Slim Bean. I was able to upgrade almost perfectly but had same problem for each one of these. Not the bootloop thankfully but instead the headphone speaker (if that is the right description) doesn't work. No sound for phone touchpad, screen selections, and when receiving a phone call (have to switch to speaker phone as back/big speaker works or plugin headset to hear whoever was calling).
All of the other features were great but I really needed to be able to use my phone as a phone! The Heimdall One-Click worked to return me to Gingerbread with same problem of splash screen bootloop (gets to pink welcome letters every once in a while). Then I used the Heimdall One-Click for Froyo (as suggested by LiangChi) and got a perfectly working version of Froyo.
Try wiping data and such, still bootlooping??
Used Froyo CWM recovery to switch to ICBINB ROM which works fairly decently.... Am I doomed to stay at Froyo though? I tried to follow all of the guides to a T but not sure what I might be doing wrong or if I might have purchased a damaged phone - can't recall ever testing camera and it still doesn't work on current stable Froyo. At various points I tried different cables, SD cards, USB ports, removing/reinstalling drivers, etc... Even tried Kies when I got back to stock Froyo to upgrade - went to Splash Screen Bootloop!
Click to expand...
Click to collapse
nope, it sounds like dirty flashes to me...
I would start with entering cwm and disabling lagfix & wiping data & caches.... linda needs to do her thing after the first boot up...
Then, I would reflash the germlin remover, If I remember correctly, you will have to do this twice (second time will allow you to check the add bootloaders)...
After the phone hits the think-pink, then you can battery dump, reenter download and flash the kernel.
Dirty Flashing
Champ - I think you might be on to something...haven't read about dirty flashing but it sounds right. I have been wiping data and caches (even tired reformatting system with a few roms). I do remember running into problems trying to following a few instructions sets that asked to disable the voodoo lagfix - hit option it just doesn't disable. After hitting disable see below Voodoo lagfix is actually: enabled next boot: disabled but even if I reboot back to CWM it is still enabled.
I might try the Odin Gremlin remover again. I was just getting frustrated after several days of failed upgrades. Second opinion on if it might be hardware/memory vs user error. I really didn't understand why even Kies (which everyone disparages) upgrade from stock Froyo also caused same loop.
champ1919 said:
You have so much info here... let's see what we can figure out.
nope, it sounds like dirty flashes to me...
I would start with entering cwm and disabling lagfix & wiping data & caches.... linda needs to do her thing after the first boot up...
Then, I would reflash the germlin remover, If I remember correctly, you will have to do this twice (second time will allow you to check the add bootloaders)...
After the phone hits the think-pink, then you can battery dump, reenter download and flash the kernel.
Click to expand...
Click to collapse
Retry the gremlim remover. Redownload it incase of a bad download.
Lumin30 has a good guide in his signature for the heimdall one clicks.
I use Odin, I have used his one clicks without problems though.
http://forum.xda-developers.com/showthread.php?t=1470716
Sent from my SGH-T959V using xda app-developers app

Categories

Resources