Star I-93 (Alps I-93) Help!! boot loop after root - General Questions and Answers

Hi Guys
I hope someone can help as I am totally at my wits end!
I have spent hours looking through all the different posts on all the forums
I have a Chinese phone Star I-93 which is also called the Alps I-93, and appears to have the same software as the Haipai I9220.
It has the MTK6575, running ICS 4.0.3.
I rooted it with the MTK Droid Root and Tools V 2.21, from the Russian forum, which worked perfectly!
But yesterday the phones battery ran flat as I forgot to charge it, and on powering on it boot loops, ie I get the blue flying android then the green block android worm coming across then it just keeps revolving the android name.
I have gone into the android system recovery, and tried wipe data/factory reset…it still loops.
I then put the backup zip created when I rooted it onto the micro sd , renamed it update.zip, I then used “apply update from sd card” scrolled to its location but when it trys to install it I get Signature Verification Failed Installation Aborted.
I can still connect to the phone with the MTK Droid Root tool but only if I boot into Factory mode.
And Smart Flash tool will connect to the phone when it is off.
So I am at a total loss on what to try next, I was up to 3am last night trying every combination I could but still it boot loops.
If anyone can help me with this, and you ever come out to the Algarve for a holiday the beers are on me.
Phill

Related

[Q] Stuck in recovery boot loop HTC Desire GSM ~ ASSISTANCE APPRECIATED!!

Severe panic!!
I rooted my Desire which was running 2.2 Froyo on the O2 UK network using unrevoked and it worked fine without any issues. Custom recovery by ClockworkMod.
The next day I then decided i needed to turn S-off so found a guide and tried installing unrevoked forever from a zip on the root of the SD and i got 'installation aborted error 42'. Tried again the next day but before i got started i decided to give myself re-assurance that i wouldnt lose anything on the device so i entered recovery and chose restore.
Big mistake! My handset then rebooted and got to the O2 splash screen. It wont move from there. Pulled battery out and tried again. Same. I assume i havent bricked the device and it is just stuck in a boot loop?
Since then i have removed all my user data from the SD card and 'cleared storage'. Tried installing an miui rom and again 'installation aborted'.
Can anyone clarify why this is happening and point me in the right direction?
I am a noob and would appreciate any help on this.

B63M bricked?

Hi There,
Please forgive me I am a complete novice when it comes to Android phone.
I have a chinese Dual sim phone that I have routed with superoneclick. I have put clockworks recovery on it with rom manager as I was trying to create a copy of the ROM. I also installed Droid X Recovery Bootstrap, however in droid x I pressed the fix permission option and the phone started changing permissions everywhere and now my phone wont start. It keeps booting up in a loop and I cannot get to the recovery to wipe the memory and start again.

[Q] MyTouch 4G Slide accidentally removed CWM

I searched everywhere on this forum and found somewhat similar problems but none as d\ifficult as mine. I have a Tmobile htc mytouch 4g slide and I attempted to root it tonight when I got kinda stuck. I was using MyTouch_4G_Slide_All-In-One_Kit_V1.0 by Hasoon 2000. I got CWM v 5.2.0.7 installed and attempted to install cyanogenmod from my sd card while in recovery mode. It installed successfully but when i restarted it got stuck on the boot up screen (I guess its also called the splashscreen). In order to get back to recovery mode i had to pull the battery. I tried formatting from the CWM menu in recovery and then re installed cyanogen but the same thing happened again. Then one of my family members came in and clicked on the install stock recovery button to see if that would help. So now I have stock recovery installed but also installed the not working cyanopgenmod. Now I cant get my computer to recognize my device to re install CWM. This is my first time rooting a device and I have no experience with development so please be patient with me. My computer recognizes it when i first enter recovery mode but then it says it was unplugged and my phone shows a picture of a phone with a red triangle and exclamation point. I am worried there is nothing i can do since doing a factory reset just results in a frozen splashscreen and my computer wont recognize it and i cant get in to recovery mode to install a different rom. Any help would be much appreciated

Mediaktek6577...Urgent Help....INCREASE UR KNOWLEDGE

Hello everyone,
Few months back i rooted my tab iball 7334i which is based on mt6577.
3 days back i converted some system app lik ibn live and cricked score from system app to user app with the help of link2sd and also made supersu system app.It asked to reboot system so i did that after that i got error "SYSTEM UUID INCONSISTENT.....U NEED TO PARTITION " and option called "I AM FEELING LUCKY " to proceed so i did recearch on google and got answer it needs to reset.
After that i went cwm recovery and clicked on wipe data... but it took one hour and i noticed it was stuck but still i left for whole night still no progress so i reset the tab and tried to turn on but it got stuck at iball logo.
Now again i went to cwm recovery and i tried to do again but still same
And also i had backup of my rooted rom through mediatek tools.
So through flash tools i flashed my tab using spflash tool by selecting the scatter file and deselecting the last two option i.e userdata and cache
after flasing ,the tab was again stuck at logo so i tried with all my 3 backups and flashed but still same
so this time i flashed recovery and converted to stock recovery
still hanging at logo but this time it suddenly went in to process where green android robot was flat ,something was going on, .progress so i left the tab for whole night but in morning still it was running so i resetted the tab and all of sudden it went dead..i made it charge and tried everything but no power
After again i did research found Mr yuweng post
http://forum.xda-developers.com/showthread.php?t=1943442
I went into meta mode and flashed rom so to utter surprise the tab woke up and flash was succesfull but again hanging at iball logo.
so this time i went to recovery but it had same stock recovery although after flashing also so again what i did that i had backup of userapp before root so i tried to restore through stock recovery but in process still it hanged as no progress was shown so again i resetted the tab and it went dead.
So i Tried several time to go in meta mode but not succesfull but i kept on trying so again tab rose from dead mode and presently its charging.SO MY TAB IS AWAKE
Now again i did research on youtube so it was shown that first i need to flash preloader by putting checkmark on it and then i need to flash whole rom but still not sure
So any expert reply
What i have
backup of titanium backup including update.zip
i have stock recovery presently in tab
and i had 3 backup of rooted rom
and also before rooting i had backup of userdata by default back up provided in android
My tab details
Device SPECIFICATION IBALL 7334i
CPU h/w : MT6577
CPU Model :ARM CORTEX A9 GHZ DUAL CORE PROCESSOR
CPU Frequency: 250.25 ~ 1001.0 MHz
So now i can say that my tab is charging and i have not tested weather i can go in recovery or not
what i need to flash and how as it is not booting well it is softbricked
And i dont understand why it is not working after it is flashed with backup rom
So any help will be highly appreciate as i think it is last stage of my tab please help
My internal memory is 16 gb so does it make sense that it takes long hours to format?????
Now again what i did that flashed my tab with stock rom and this time 1st put checkmarked on preloader then flashed and then on DSP_BL and then flashed and then recovery then flashed and whole except for cheked mark preloader and dsp and flashed that is first 2 option and last 2 option uncheked
to strange ,after flashing when tab was red triangle with exclamation came and then after sometime again rebooted and still at iball logo
Any expert pls help

Please Help with SM-G920V Verizon S6

Hello All,
My friend has a Verizon S6 that is not booting up. Stays frozen or in a boot loop on Samsung logo.
No idea what Android version it had.
I downloaded the latest firmware md5 file for it from SamFirm and tried to flash it with Odin. It was a single file so I used the AP button as usual.
It starts flashing but when it comes to System.img Odin fails. I tried many times with many Odin Versions and re-downloaded the firmware file and tried many usb cables and 2 different PCs but no go.
As I'm writing this, I tried it again and it completed the flash successfully but the phone booted up in a blue Android screen and it said installing system update, then erasing and it froze right there. I go into recovery and reset to factory settings and wipe cache. And the purple LED is on all the time.
So now it's stuck in a boot loop on the Verizon logo red screen.
I believe something is messed up in the partitions or memory, I'm not sure. Anyway I can revive this phone for him?
He's not interested in rooting but if it's a must, no problem; anything to get the phone started.
The phone is sim unlocked cos he was using it on sim cards outside the US, so he would like to keep doing that as he no longer lives in the US.
Thank you kindly in advance.

Categories

Resources