Hi,
I have bricked my atrix 2. I have read this thread http://forum.xda-developers.com/showthread.php?t=1396650 but no luck.
every time i use RSD LIGHT it gives me error and fail. from this site which file should i use http://sbf.droid-developers.org/edison/list.php
i do have my original ROM backed-up, how do i install it?
this is a ATT phone, I am able to get into recovery and fastboot.
when i turn the phone ON it goes into
AP Fastboot Flash Mode (S) (Flash Failure)
0A.68
pleas help
Was you on 2.3.6 GB or the ICS Leak? This is extremely important to know.
If you was on 2.3.6 GB you have to use the patch in the fxz. If you was on ICS, you HAVE to use Jim's utility script to get back to GB from ICS.
Sent from my MB865 using xda premium
I was using 2.3.6
Pleas Help
Sent from my Nexus 7 using xda app-developers app
Please see this thread: http://forum.xda-developers.com/showthread.php?t=1396650
Read on how to fxz back to 2.3.5. Since you were on 2.3.6 you will need to patch the file. There are instructions in the thread on how to do that also. Read carefully!
Sent from my SAMSUNG-SGH-I727 using xda premium
I have my original ROM backed up, with cwm its about one GB. Its not a zip file. Can someone tell Me
how to flash that. I am able get into fastbboot and recovery. The only Thing is I can't change my phone anymore.
I had 2.3.6 on the phone. I need to patch for 2.3.5? I'm not understanding.
Please help those is my only phone.
Sent from my Nexus 7 using xda app-developers app
If you can't get into CWM, you CANNOT restore your CWM backup. It will not work in stock recovery.
You need to fxz back to 2.3.5, and then ota to 2.3.6.
I'm not gonna give you detailed steps as its all laid out in the link I gave you in my previous response to you. Please read it thoroughly and you won't have an issue.
The link will explain why you need to patch the file and how.
Sent from my SAMSUNG-SGH-I727 using xda premium
Can you help me find the fxz file. All the link don't work.
Sent from my Nexus 7 using xda app-developers app
Assuming you are on AT&T, download the AT&T file from the link you posted in your original post, then patch it with the patch file in the noob thread.
Follow the instructions carefully. If you don't patch the fxz file, it won't flash. Let me know if you run into problems
Sent from my SAMSUNG-SGH-I727 using xda premium
When I used the file from the site it stop and fails. Or Do I install the patch first. It RDS failes.
Thanks for the help
Sent from my Nexus 7 using xda app-developers app
It's failing because you haven't patched it. Patch it, then flash it.
Sent from my SAMSUNG-SGH-I727 using xda premium
Fall of Enosis said:
It's failing because you haven't patched it. Patch it, then flash it.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
my phone was 100% working 2 day ago. I tried to flash android jellybean using this site: http://androidrays.com/1007/how-to-update-motorola-atrix-2-to-cm10-jellybean-rom/
now my phone is bricked.
i tried the noob guide,
1) download the FXz file
2) download the replace.zip ( which is the patch)
3) unziped both files.
4) Coped the replace file into the fxz file.
5) use RSD LIght to flash.
every time it failed. I tried most of the fxz files on the site but no luck.
one question , when i choose the file for RSD i get two options to select from 1) file from the patch (InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285) 2) the FXZ file. which one should i use
please help
thank you
Bring up RSD lite, drag the original inline_flashing xml from your desktop to RSD and drop it, then drag the patch into RSD and drop it, it should ask if you want to replace, say yes. Then make sure your phone is in AP Fastboot plug it in via usb, verify that it sees your device, then select start. Let it go until it says pass.
That is all you have to do. However, if you didn't have USB Debugging checked on your phone before all of this, that may be a problem.
It's the same thing Fall has been telling you, but a bit dumbed down so to speak.
I'm sorry if this doesn't help man..
Sent from my MB865 using xda premium
Oh man.
Oh man.
That link couldn't be further from the truth George, and he is going to cause many users issues like yourself. Two very important things about that link: one, you can only flash stock Motorola images through regular recovery. It is impossible to flash things like cyanogenmod in stock recovery. You need a custom recovery to flash custom ROMS. Like bootmenu boot strap, or safe strap.
Second: to flash cm10 (which is based on jelly bean) you MUST be on ICS first.
Gosh, that link is going to cause some headaches.
That being said, let us know how the flash goes man.
Sent from my SAMSUNG-SGH-I727 using xda premium
Axis_Drummer said:
Bring up RSD lite, drag the original inline_flashing xml from your desktop to RSD and drop it, then drag the patch into RSD and drop it, it should ask if you want to replace, say yes. Then make sure your phone is in AP Fastboot plug it in via usb, verify that it sees your device, then select start. Let it go until it says pass.
That is all you have to do. However, if you didn't have USB Debugging checked on your phone before all of this, that may be a problem.
It's the same thing Fall has been telling you, but a bit dumbed down so to speak.
I'm sorry if this doesn't help man..
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
i tried it but no luck. any other thoughts?
please
Fall of Enosis said:
Oh man.
Oh man.
That link couldn't be further from the truth George, and he is going to cause many users issues like yourself. Two very important things about that link: one, you can only flash stock Motorola images through regular recovery. It is impossible to flash things like cyanogenmod in stock recovery. You need a custom recovery to flash custom ROMS. Like bootmenu boot strap, or safe strap.
Second: to flash cm10 (which is based on jelly bean) you MUST be on ICS first.
Gosh, that link is going to cause some headaches.
That being said, let us know how the flash goes man.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Indeed it is.. that isn't good.
By the way Fall of Enosis, much respect for you sticking around to help this guy.
And King, I really wish I could help you, but if that didn't work, and you wasn't on ICS before trying, then I really don't know.
As long as you can still get into AP fastboot, you still have a chance. Ill see if I can figure out something else to try.
Sent from my MB865 using xda premium
kinggeorge3287 said:
i tried it but no luck. any other thoughts?
please
Click to expand...
Click to collapse
Dang, here's what I'm thinking and I've seen it before, where for some reason PART of the ICS/JB system gets flashed but part doesn't. So one last thing.... George, there should be a number in RSD lite where the flash is actually failing at. Example: 3/18
What part is it failing at?
Axis_Drummer said:
Indeed it is.. that isn't good.
By the way Fall of Enosis, much respect for you sticking around to help this guy.
And King, I really wish I could help you, but if that didn't work, and you wasn't on ICS before trying, then I really don't know.
As long as you can still get into AP fastboot, you still have a chance. Ill see if I can figure out something else to try.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
thank you fall for trying to help me. any thoughts please let me know.
thank you
Maybe ya didn't see it....
Fall of Enosis said:
Dang, here's what I'm thinking and I've seen it before, where for some reason PART of the ICS/JB system gets flashed but part doesn't. So one last thing.... George, there should be a number in RSD lite where the flash is actually failing at. Example: 3/18
What part is it failing at?
Click to expand...
Click to collapse
Fall of Enosis said:
Dang, here's what I'm thinking and I've seen it before, where for some reason PART of the ICS/JB system gets flashed but part doesn't. So one last thing.... George, there should be a number in RSD lite where the flash is actually failing at. Example: 3/18
What part is it failing at?
Click to expand...
Click to collapse
I downolad the "InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.xml" I coped the files from replace.zip into the folder "InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.xml" .
RSD fails at 3/18 flash mbmloader "mbmloader.bin'
thank you
Pgeorge
kinggeorge3287 said:
RSD fails at 3/18 flash mbmloader "mbmloader.bin'
thank you
Pgeorge
Click to expand...
Click to collapse
I have had this same error from RSD Lite and it was because I did not patch the fxz. Not saying you didn't, but just saying.
Try it from another computer. I've been reading around and Its worked for others.
Thank you for being patient man. It helps us help you.
Sent from my MB865 using xda premium
Related
Hey everybody, so I might be posting in the wrong section but since its a question I figured I'd post in the Q&A. So my question is since I still have froyo BL and on CM9 can I still flash another rom even though my recovery has the rainbow effect? In recovery the top 1/3 is rainbow but the rest I can read good. I want to flash revolution rom. And I would Odin or heimdall back to stock and go from there but I have no PC. So yeah would it be safe to wipe all and flash revolution even though I'm on a froyo BL, blue CWM and on CM9?
Sent from my SGH-I997 using XDA
Nobody can give me an answer?!?!
Sent from my SGH-I997 using XDA
popi09 said:
Nobody can give me an answer?!?!
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Yeah, you have had to wait a really long time for an answer. I figured folks were just waiting for you to check out the other threads with the exact same question.
Just messing with you, and you'd really be fine to flash the rom that you want to flash. Your best bet would be to get set up right, though. To get rid of the rainbows, it's not too hard to get Gingerbread bootloaders. Follow the instructions in this post to a "t", including the part in the FAQ about how to get red CWM, and you'll have everything you need for a rainbow free rom flashing experience. It will get you set up on stock Gingerbread with custom recovery. Then you can flash any of the other available roms.:
http://forum.xda-developers.com/showthread.php?t=1613523
popi09 said:
Nobody can give me an answer?!?!
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Huh thought process like that will get up you no support....
Hey guys,
Tried installing ICS with my rooted ATRIX2. It failed so I did some reading found out you had to unroot to update. Went back unrooted and still the update fails. I rooted with casual public beta. Unrooted using the one click method. No idea how to flash my phone to a different rom. Any help would be greatly appreciated. Trying to update and root again.
Adam
KizMo said:
Hey guys,
Tried installing ICS with my rooted ATRIX2. It failed so I did some reading found out you had to unroot to update. Went back unrooted and still the update fails. I rooted with casual public beta. Unrooted using the one click method. No idea how to flash my phone to a different rom. Any help would be greatly appreciated. Trying to update and root again.
Adam
Click to expand...
Click to collapse
So you was rooted on 2.3.6 right?
If so you need to just fxz back to gb 2.3.6, and then try the ota. But beware, the ota has no fxz to save you in case of a screw up.
Fxz found here:
http://forum.xda-developers.com/showthread.php?p=32113181
Explanation on how to fxz here:
http://forum.xda-developers.com/showthread.php?p=20389449
Also this should be in Q&A
Sent from my MB865 using xda premium
Even if you have unrooted, if you deleted any of the stock apps, or still have a custom recovery set up at boot, then the update won't work. Like previously stated, you need to FXZ back to completely stock gingerbread, then run the update. I had the same issue.
Sent from my MB865 using xda app-developers app
Delete the files that installed by bootstrap recovery app if you have installed it before.
Sent from my ME865 using xda premium
Alright thanks guys. And yes I was rooted on 2.3.6. Now should I remove my micro SD when I downgrade?
Sent from my MB865 using xda app-developers app
KizMo said:
Alright thanks guys. And yes I was rooted on 2.3.6. Now should I remove my micro SD when I downgrade?
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
No need for that
Sent from my ME865 using xda app-developers app
question about update to ICS
Noticed a lot of people having problems with Battery( not charging) going dead quickly due to media files. any comments would be helpful and Thanks.
Ok i followed all the steps loaded my phone into fastboot flash, installed the drivers, download rsd lite 5.7, and I cant get RSD Lite to recognize my phone. I uninstalled and re installed the necessary drivers and still nothing. I also noticed when picking a file in RSD Lite when I go to select a file there are two. (edison-user 2.3.6 5.5.1-175_EDMR1.25 5.51.175.25 release-keys2011-11-16 23:52 Off.Bld LUD_EDISON_R1D7_PATCH_36_111116_2336 crh1090280_M570_PC_CARD_RAIN) or (ndp). I am assuming that I need to flash the first file.
Any help on where I went wrong or why it isnt recognizing my phone would be greatly appreciated. Sorry I am a noob to modding phones. I promise I learn quickly and appreciate your patience.
Adam
KizMo said:
Ok i followed all the steps loaded my phone into fastboot flash, installed the drivers, download rsd lite 5.7, and I cant get RSD Lite to recognize my phone. I uninstalled and re installed the necessary drivers and still nothing. I also noticed when picking a file in RSD Lite when I go to select a file there are two. (edison-user 2.3.6 5.5.1-175_EDMR1.25 5.51.175.25 release-keys2011-11-16 23:52 Off.Bld LUD_EDISON_R1D7_PATCH_36_111116_2336 crh1090280_M570_PC_CARD_RAIN) or (ndp). I am assuming that I need to flash the first file.
Any help on where I went wrong or why it isnt recognizing my phone would be greatly appreciated. Sorry I am a noob to modding phones. I promise I learn quickly and appreciate your patience.
Adam
Click to expand...
Click to collapse
Did you turn on USB debugging before going into AP fastboot?
Sent from my MB865 using xda premium
(Edit) I did intact have it enabled. Still no dice.
Sent from my MB865 using xda app-developers app
OK try using a different computer. It has worked for others.
Sent from my MB865 using xda premium
Hi guys,
my rooted 4.2.2 rom'd gs3 has a finicky usb port and will not charge. I need to return the phone for a warranty exchange, but is there a way I can do that when the usb port is damaged and is not recognized by the pc? thanks for the help, it is greatly appreciated!
Have you tried mobile odin app.
Sent from my GT-P5113 using xda premium
amotamatapia said:
Hi guys,
my rooted 4.2.2 rom'd gs3 has a finicky usb port and will not charge. I need to return the phone for a warranty exchange, but is there a way I can do that when the usb port is damaged and is not recognized by the pc? thanks for the help, it is greatly appreciated!
Click to expand...
Click to collapse
1. Mobile odin, however I've personally never used it. There are probably guides out there somewhere how to return the phone to stock.
2. You may still be under samsung's warranty period, they don't care if your phone is rooted and will fix hardware problems. They will flash the most recent stock rom and firmware they have to your phone so you'd have to re root it.
Sent from my SCH-I535 using Tapatalk 2
I have not tried the mobile odin app (did not know it existed). I will try that and post back results in a little while. Thanks everyone
Its pretty straight forward. It does cost you a few bucks but its always nice to have and support a great developer.
Sent from my GT-P5113 using xda premium
I downloaded the 1.2gb file which was supposed to flash the stock ROM and lock the boot loader, but all it did was wipe my current ROM? Can anyone help me understand what I did wrong? Thanks again! I used the mobile Odin app and it all seemed OK ...md5 sum was good too
bbqsfire said:
Its pretty straight forward. It does cost you a few bucks but its always nice to have and support a great developer.
Sent from my GT-P5113 using xda premium
Click to expand...
Click to collapse
Posted above this the issues I'm having. Thanks for your help
What exactly do you mean wiped your current rom. Does it boot, you get anything to happen or just blank.
Sent from my SCH-I535 using xda premium
amotamatapia said:
I downloaded the 1.2gb file which was supposed to flash the stock ROM and lock the boot loader, but all it did was wipe my current ROM? Can anyone help me understand what I did wrong? Thanks again! I used the mobile Odin app and it all seemed OK ...md5 sum was good too
Click to expand...
Click to collapse
What guide did you follow? You could've done a number of things wrong, try to boot into recovery or download mode to see if you're hardbricked.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
What guide did you follow? You could've done a number of things wrong, try to boot into recovery to see if you're hardbricked.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Looks like I cannot boot into recovery. Download mode is fine. .the phone just boots into the 4.2.2 ROM I had. I was using this guide to revert back to stock
http://forum.xda-developers.com/showthread.php?t=1762709
bbqsfire said:
What exactly do you mean wiped your current rom. Does it boot, you get anything to happen or just blank.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
It did a data wipe of the ROM I currently had
amotamatapia said:
It did a data wipe of the ROM I currently had
Click to expand...
Click to collapse
Ok I read your post from earlier. What file did you try to flash. Was the old 4.1.1 or one of the newer 4.1.2 img files
Sent from my SCH-I535 using xda premium
bbqsfire said:
Ok I read your post from earlier. What file did you try to flash. Was the old 4.1.1 or one of the newer 4.1.2 img files
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
it was this one: COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_u ser_low_ship_NOWIPE_FIXED.tar.md5
which is 4.1.1 i believe
amotamatapia said:
it was this one: COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_u ser_low_ship_NOWIPE_FIXED.tar.md5
which is 4.1.1 i believe
Click to expand...
Click to collapse
Correct it is the 4.1.1 img. I am away from my home computer but I think that might have been the wrong file since you want to go back to stock. I will try to search the thread for the file I used during my training
Sent from my SCH-I535 using xda premium
---------- Post added at 09:52 AM ---------- Previous post was at 09:43 AM ----------
amotamatapia said:
it was this one: COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_u ser_low_ship_NOWIPE_FIXED.tar.md5
which is 4.1.1 i believe
Click to expand...
Click to collapse
The link below should take you to the mb1 file. This will wipe everything and should take you back to stock 4.1.2. I have not done this method in a while so if something borks im sorry for mentioning it.
http://forum.xda-developers.com/showthread.php?t=
Sent from my SCH-I535 using xda premium
bbqsfire said:
Correct it is the 4.1.1 img. I am away from my home computer but I think that might have been the wrong file since you want to go back to stock. I will try to search the thread for the file I used during my training
Sent from my SCH-I535 using xda premium
---------- Post added at 09:52 AM ---------- Previous post was at 09:43 AM ----------
The link below should take you to the mb1 file. This will wipe everything and should take you back to stock 4.1.2. I have not done this method in a while so if something borks im sorry for mentioning it.
http://forum.xda-developers.com/showthread.php?t=
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Thanks for your help I was able to get a usb connection enough and I used Odin on my laptop. The only problem I have now is that the custom unblock symbol appears when I boot up the phone. Any idea how to remove that now that root is gone? Ignore the following words...my phone won't let me edit them out. Thanks again.
Edit: it looks like the file I used was a 4.0.4 image. For return purposes is it fine if it's the older version? There should be no signs of root now. I'll keep checking for updates though
amotamatapia said:
Thanks for your help I was able to get a usb connection enough and I used Odin on my laptop. The only problem I have now is that the custom unblock symbol appears when I boot up the phone. Any idea how to remove that now that root is gone? Ignore the following words...my phone won't let me edit them out. Thanks again.
Edit: it looks like the file I used was a 4.0.4 image. For return purposes is it fine if it's the older version? There should be no signs of root now. I'll keep checking for updates though
Click to expand...
Click to collapse
You should be able to go into settings and factory reset your phone and then try taking the ota.
Sent from my SCH-I535 using xda premium
bbqsfire said:
You should be able to go into settings and factory reset your phone and then try taking the ota.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Thanks for your help throughout this process. I definitely was pretty frazzled at the whole thing !
bbqsfire said:
You should be able to go into settings and factory reset your phone and then try taking the ota.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Phone isn't wanting to update the android version...should I be worried for warranty exchange periodpurposes?
amotamatapia said:
Phone isn't wanting to update the android version...should I be worried for warranty exchange periodpurposes?
Click to expand...
Click to collapse
I would, if you have an ics rom they will be able to tell something is off. It should accept an OTA update. If you can odin again, use the vrblk3 image and accept the ota to vrbmb1. It may not be updating due to to the jump from ics to the most recent base. That will make sure you're completely back to stock, with a locked bootloader, and a stock recovery.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
I would, if you have an ics rom they will be able to tell something is off. It should accept an OTA update. If you can odin again, use the vrblk3 image and accept the ota to vrbmb1. It may not be updating due to to the jump from ics to the most recent base. That will make sure you're completely back to stock, with a locked bootloader, and a stock recovery.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I can only find 4.1.1 files...and the link posted earlier in the thread doesn't work. Any idea where to find a 4.1.2 version?
dont ask was but personal preff, id like to be back on 4.0.4. but everytime i try and flash stock ship tar and bootloader it just get stuck at samsung galaxy s3 screen, and i try to go to recovery and it goes to the android and it falls over and dies and has buch of fail text in red.. is there no way to go back? im on 4.1.2
Hmmm. I odined back just see and it works for me. How are you flashing it?
Also this should be moved to q&a section.
Sent from my SCH-I535 using Tapatalk
FeelLikeThis said:
Hmmm. I odined back just see and it works for me. How are you flashing it?
Also this should be moved to q&a section.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
can you post me or point me to the odin files? i got the 4.0.4 from the sammobile website unziped the zip and flashed the .tar file. after that is done flashing it says (myphone) "samsung galaxy s3" then the blue recovery booting, then it still shows the unlock icon..i understand id have to wipe in recovery but it just fails after.. if you really did odin, could you post the files you used and give me a step by step.. it should be much app.!
I'll put it on my drop box later when I get home again.
Sent from my SCH-I535 using Tapatalk
FeelLikeThis said:
I'll put it on my drop box later when I get home again.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
thank you much.. can you tell me what to do? dont you have to flash the bootchains or whatever? im just lost.. im on stock rooted 4.1.2 right now.
If you look for the thread with root66 it should tell you exactly what to do, but I can post it up when I get you the files.
Sent from my SCH-I535 using Tapatalk
I've look through too many with no luck and if you tried it and it worked I feel good about you posting them and telling me your steps.
Sent from my SCH-I535 using XDA Premium 4 mobile app
FeelLikeThis said:
If you look for the thread with root66 it should tell you exactly what to do, but I can post it up when I get you the files.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
hate being a nag, but im a student so i cant be up all night flashing shizz to my phone.... again lol. do you have any estimate of when you'd be able to help me out? and i tried that thread you referred to, and it just had me stumped again.. :silly:
did you ever get around too it?
The phone was stuck on Motorola logo and I flahed it using RSDLite and the FXZ InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zip. Everything went ok but still frozen on the logo. Please help.
Get the latest RSDLite I think its version 6 or something and run the fxz again.
Sent from my MB865 using xda app-developers app
minhajlk said:
Get the latest RSDLite I think its version 6 or something and run the fxz again.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
I'm using version 6.1.6
Sometimes this happens, so fxz again.
Sent from my MB865 using xda app-developers app
minhajlk said:
Sometimes this happens, so fxz again.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Already flashed three times, on another pc, with different data cable and different RSDLite version and nothing. Why is this happening? Do I have to go back to GB first and then flash ICS?
norkitt said:
Already flashed three times, on another pc, with different data cable and different RSDLite version and nothing. Why is this happening? Do I have to go back to GB first and then flash ICS?
Click to expand...
Click to collapse
Something might be wrong with the fxz file. Get a fresh download of it
atrix2man said:
Something might be wrong with the fxz file. Get a fresh download of it
Click to expand...
Click to collapse
I've downloaded it twice and the md5 is the same. Can I go back to GB?
No you can't go back to GB you will hard brick your device. There is another method of flashing created by altered search for that and also disable your virus guard before flashing.
Sent from my MB865 using xda app-developers app
minhajlk said:
No you can't go back to GB you will hard brick your device. There is another method of flashing created by altered search for that and also disable your virus guard before flashing.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Is possible to downgrade AT&T ICS 4.0.4(AP Fastboot Mode (S) 0A.72) to GB? My phone is stuck on M logo and I've flashed it almost ten times and nothing. Always tried flashing this fxz: InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zi p
AFAIK GB's bootloader version is 0A.72 too, isn't? So I suppose I can downgrade safely.
You cannot go back to GB, your only solution is get ICS up and running. Did you search for the flashing method without using RSDLite? There is a thread on this by alteredlikeness try that method, also make sure you have at least 50% battery.
Here I dug up the link for you: http://forum.xda-developers.com/showpost.php?p=36834775&postcount=108
All credit goes to Altered hit the THANKS button on his link.
Sent from my MB865 using xda app-developers app
minhajlk said:
You cannot go back to GB, your only solution is get ICS up and running. Did you search for the flashing method without using RSDLite? There is a thread on this by alteredlikeness try that method, also make sure you have at least 50% battery.
Here I dug up the link for you: http://forum.xda-developers.com/showpost.php?p=36834775&postcount=108
All credit goes to Altered hit the THANKS button on his link.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
I think that was the first thing he tried using altred's .bat workaround.......
darth_nihar said:
I think that was the first thing he tried using altred's .bat workaround.......
Click to expand...
Click to collapse
He was using RSDLite and I think something amiss here, so that's why I suggested Altered's batch file work around.
minhajlk said:
He was using RSDLite and I think something amiss here, so that's why I suggested Altered's batch file work around.
Click to expand...
Click to collapse
he first started with altred's script and wasn't able to see the chat on the fourums.......
minhajlk said:
You cannot go back to GB, your only solution is get ICS up and running. Did you search for the flashing method without using RSDLite? There is a thread on this by alteredlikeness try that method, also make sure you have at least 50% battery.
Here I dug up the link for you: http://forum.xda-developers.com/showpost.php?p=36834775&postcount=108
All credit goes to Altered hit the THANKS button on his link.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Yes I have use Altered's script a few times and still the same. Should I keep trying with Altered's script?
norkitt said:
Yes I have use Altered's script a few times and still the same. Should I keep trying with Altered's script?
Click to expand...
Click to collapse
Did you try "flashing restore-ics-system-only.bat" script?
minhajlk said:
Did you try "flashing restore-ics-system-only.bat" script?
Click to expand...
Click to collapse
Yes I did, and again nothing happened.
norkitt said:
Yes I did, and again nothing happened.
Click to expand...
Click to collapse
I'm actually clueless on what to do next
Try PMing some senior dev lyk JIM or altred
I had same problem with defy + after flashing stock rom.. GO to stock recovery then wipe data.. i did it n then it booted :laugh:
Tushcool said:
I had same problem with defy + after flashing stock rom.. GO to stock recovery then wipe data.. i did it n then it booted :laugh:
Click to expand...
Click to collapse
Already tried that we have done everything there is to do .......
Ok can we take this offline. I have a few ideas and we test a few things out and look at some options, but I don't want to clutter this thread with troubleshooting questions and replies, we can post what we did and the outcome once we know what to do next and what we did.
I just sent you and the OP a PM. I just need to establish some information before I make any recommendations of what to try next.