I flashed my phone with cm10 I think? every thing went fine with that it was successful, however when the phone rebooted it stops at the samsung logo. The unit will not go into recovery mode. When I put it into download mode the screen shows odin d/l mode and the model is 5830i but my model is 5830m. also the computer does not even detect my device. where do I go from here?
Download a ROM for the 5830m with an Odin install. Go into download and install the ROM with Odin.
pc does acknolwedge that a device is connected
pc does acknowledge that a device is connected, it's as the pc doesn't know that a device is connected,( yes I loaded samsung drivers and Kies). What am I doing wrong?
Related
im stuck on the samsung galaxy s 19000 boot screen and i can go into download mode but not into recovery... but the problem is that i cant get my phone to connect to computer thru kies or anything and i tried using another cable and computer...can anybody help me plaese??
Did you install the drivers for your phone on the computer? I was in a similar situation with a Samsung fascinate. I got stuck on a boot/flash loop. What I did was look for the phones drivers, installed them on the computer, get it into download mode (with the android shoveling), looked for the Odin software, looked for the fascinates factory rom, and flashed it through Odin.
Sent from my ADR6300 using XDA App
yea i installed the drivers and reinstalled them but it still says usb device not recognized and on device maneger says unknown device and i dont know waht to do.. if it at least get it to connect once i will be very happy
to be staright forward.!!! my phone suddenly got dead while playing some games.
i can go in download mode but not in recovery mode.!
my phone is rooted.!
after connecting phone to pc it show some unknown devidces...usb not recognized and stuff.
odin cant detect my phone...what do i do...please help.:crying:
rajjhamtani said:
to be staright forward.!!! my phone suddenly got dead while playing some games.
i can go in download mode but not in recovery mode.!
my phone is rooted.!
after connecting phone to pc it show some unknown devidces...usb not recognized and stuff.
odin cant detect my phone...what do i do...please help.:crying:
Click to expand...
Click to collapse
I don't have third-eye opened so I can't guess your phone model but
1.install Android SDK
2.install Kies if you have it uninstall restart PC download last version install it then restart PC now surely you have drivers (no unknown device)
3.flash by Odin a stock rom from sammobile.com get .pit and Odin from this site also you have to subcribe to get access to download link
before step 3 put you phone in download mode and connect to PC then check in Device Manager for ADB Interface (see pict) if not something is bad with previous steps
Hi everybody, Yesterday my friend and i were trying to upgrade his Samsung Galaxy Core (GT-I8260L) from official stock jellybean 4.1.2 to kitkat 4.4.4 unnoficial. We rooted it succesfully, installed Super SU, and BusyBox. Then we downloaded a TWRP file to flash it through ODIN. the flash was succesfull but when the phone rebooted it got stuck at the download mode. It doesnt boot, and we can't acces the recovery by any means. it just turns the screen on and show the download mode screen (picture attached).
We have tried everything, but the thing is that the device isn't recogogniced by the pc (We've tried in a win 8.1 and win 7 pc, but had no luck.). It fails to install the right drivers. we've tried to download almost every samsung phone drivers, but none of them worked. ODIN also fails to recognize it.
we also tried Heimdall, but when we try to install the drivers it does recognize the phone as 'MSM7x27' for some reason.
We also have problems setting up the 'SAMSUNG Mobile USB CDC Composite Device Driver', failing to make it work every time we tried to configure it (Automatic Windows Driver Install or Downloading it manually).
I hope someone can at least guide us through the solution or suggest a way to fix it.
Thanks in advance
hello, I searched but cannot seem to find this situation.
Phone stops at first samsung logo that shows model no and goes no further.
SD card is formatted and there is nothing on it (no backups).
I can boot into recovery (not always), but not download mode. There is nothing available in recovery as card is formatted.
I normally use linux, but used odin in windows.
USB drivers are ok except mtp connection to phone via usb. Phone is recognized as Samsung Android device. I used developer usb drivers and not kies; Should I have used kies.
If someone could point me to a thread that'd be ideal for this situation, I'd appreciate it.
edit:
every once in a while I can log into download mode or recovery. Phone keeps restarting and I have to remove the battery to turn it off and then enter download or recovery.
I can't seem to get the windows drivers to work as the phone is in either booting or in download mode when installing drivers.
kjarak said:
hello, I searched but cannot seem to find this situation.
Phone stops at first samsung logo that shows model no and goes no further.
SD card is formatted and there is nothing on it (no backups).
I can boot into recovery (not always), but not download mode. There is nothing available in recovery as card is formatted.
I normally use linux, but used odin in windows.
USB drivers are ok except mtp connection to phone via usb. Phone is recognized as Samsung Android device. I used developer usb drivers and not kies; Should I have used kies.
If someone could point me to a thread that'd be ideal for this situation, I'd appreciate it.
edit:
every once in a while I can log into download mode or recovery. Phone keeps restarting and I have to remove the battery to turn it off and then enter download or recovery.
I can't seem to get the windows drivers to work as the phone is in either booting or in download mode when installing drivers.
Click to expand...
Click to collapse
OP has already posted in the correct section:
http://forum.xda-developers.com/galaxy-s3/help/soft-brick-t3408861
Thread closed.
Hello guys, I'm really STUCK with the galaxy S6 (G920F) at the moment.
A friend gave it to me he said it suddenly turned off while he was playing a game and couldn't boot anymore.
I can't turn it off, it will keep on turning on automatically.
I can't go into recovery mode.
I can only go into download mode and flash a firmware with odin
I flashed the stock firmware with the latest odin and it flashed successfully. But it's still stuck on the Samsung logo (powered by Android) and won't boot into recovery or do anything at all.
So I read it could be the battery, so I bought a new one and replaced the battery.
But the problem remains. On Windows 7 x64 it's detected as "Gadget Serial" and "SAMSUNG Mobile USB CDC Composite Device" when I'm in download mode.
Odin detects the phone fine.
I then tried using Samsung Kies, and Samsung Smart Switch. Samsung Smart Switch detects an "unsupported device" and Samsung Kies doesn't detect anything at all and is stuck at "connecting...".
I don't have any ideas anymore and I fear it's a dead flash chip or any other board malfunctions.
Any suggestions maybe? Pleasee?
nekrosmsk said:
Hello guys, I'm really STUCK with the galaxy S6 (G920F) at the moment.
A friend gave it to me he said it suddenly turned off while he was playing a game and couldn't boot anymore.
I can't turn it off, it will keep on turning on automatically.
I can't go into recovery mode.
I can only go into download mode and flash a firmware with odin
I flashed the stock firmware with the latest odin and it flashed successfully. But it's still stuck on the Samsung logo (powered by Android) and won't boot into recovery or do anything at all.
So I read it could be the battery, so I bought a new one and replaced the battery.
But the problem remains. On Windows 7 x64 it's detected as "Gadget Serial" and "SAMSUNG Mobile USB CDC Composite Device" when I'm in download mode.
Odin detects the phone fine.
I then tried using Samsung Kies, and Samsung Smart Switch. Samsung Smart Switch detects an "unsupported device" and Samsung Kies doesn't detect anything at all and is stuck at "connecting...".
I don't have any ideas anymore and I fear it's a dead flash chip or any other board malfunctions.
Any suggestions maybe? Pleasee?
Click to expand...
Click to collapse
Sounds to me like it has run out of storage space and has no room to cache files when it boots.
Have you tried extracting the stock recovery.img from the stock firmware file then converting the recovery.img to a .tar.md5 file, then flashing the recovery and try to boot directly to it after flashing? If you can get into recovery, you can factory reset the device and wipe the cache partition. Sometimes this solves a bootloop issue after flashing stock firmware.
You can also try flashing a copy of TWRP for your device and then use TWRP to factory reset and wipe the device.
Sent from my Amazon Tate using Tapatalk